- 19 Mar, 2018 16 commits
-
-
Bart Van Assche authored
Avoid that building with W=1 triggers warnings about the kernel-doc headers. Signed-off-by:
Bart Van Assche <bart.vanassche@wdc.com> Reviewed-by:
Michael Lyle <mlyle@lyle.org> Signed-off-by:
Jens Axboe <axboe@kernel.dk>
-
Bart Van Assche authored
This patch avoids that building with W=1 triggers complaints about switch fall-throughs. Signed-off-by:
-
Bart Van Assche authored
Make it possible for the compiler to verify the consistency of the format string passed to __bch_check_keys() and the arguments that should be formatted according to that format string. Signed-off-by:
-
Bart Van Assche authored
This patch avoids that smatch complains about inconsistent indentation. Signed-off-by:
Coly Li <colyli@suse.de> Signed-off-by:
-
Coly Li authored
If a bcache device is configured to writeback mode, current code does not handle write I/O errors on backing devices properly. In writeback mode, write request is written to cache device, and latter being flushed to backing device. If I/O failed when writing from cache device to the backing device, bcache code just ignores the error and upper layer code is NOT noticed that the backing device is broken. This patch tries to handle backing device failure like how the cache device failure is handled, - Add a error counter 'io_errors' and error limit 'error_limit' in struct cached_dev. Add another io_disable to struct cached_dev to disable I/Os on the problematic backing device. - When I/O error happens on backing device, increase io_errors counter. And if io_errors reaches error_limit, set cache_dev->io_disable to true, and stop the bcache device. The result is, if backing device is broken of disconnected, and I/O errors reach its error limit, backing device will be disabled and the associated bcache device will be removed from system. Changelog: v2: remove "bcache: " prefix in pr_error(), and use correct name string to print out bcache device gendisk name. v1: indeed this is new added in v2 patch set. Signed-off-by:Hannes Reinecke <hare@suse.com> Reviewed-by:
-
Coly Li authored
In order to catch I/O error of backing device, a separate bi_end_io call back is required. Then a per backing device counter can record I/O errors number and retire the backing device if the counter reaches a per backing device I/O error limit. This patch adds backing_request_endio() to bcache backing device I/O code path, this is a preparation for further complicated backing device failure handling. So far there is no real code logic change, I make this change a separate patch to make sure it is stable and reliable for further work. Changelog: v2: Fix code comments typo, remove a redundant bch_writeback_add() line added in v4 patch set. v1: indeed this is new added in this patch set. [mlyle: truncated commit subject] Signed-off-by: -
Chengguang Xu authored
In current code closure debug file is outside of debug directory and when unloading module there is lack of removing operation for closure debug file, so it will cause creating error when trying to reload module. This patch move closure debug file into "bcache" debug direcory so that the file can get deleted properly. Signed-off-by:
Chengguang Xu <cgxu519@gmx.com> Reviewed-by:
Tang Junhui <tang.junhui@zte.com.cn> Signed-off-by:
-
Tang Junhui authored
In bch_mca_scan(), There are some confusion and logical error in the use of loop variables. In this patch, we clarify them as: 1) nr: the number of btree nodes needs to scan, which will decrease after we scan a btree node, and should not be less than 0; 2) i: the number of btree nodes have scanned, includes both btree_cache_freeable and btree_cache, which should not be bigger than btree_cache_used; 3) freed: the number of btree nodes have freed. Signed-off-by:
-
Tang Junhui authored
In bch_mca_scan(), the return value should not be the number of freed btree nodes, but the number of pages of freed btree nodes. Signed-off-by:
-
Tang Junhui authored
Stripe size is shown as zero when no strip in back end device: [root@ceph132 ~]# cat /sys/block/sdd/bcache/stripe_size 0.0k Actually it should be 1T Bytes (1 << 31 sectors), but in sysfs interface, stripe_size was changed from sectors to bytes, and move 9 bits left, so the 32 bits variable overflows. This patch change the variable to a 64 bits type before moving bits. Signed-off-by:
-
Tang Junhui authored
When we run IO in a detached device, and run iostat to shows IO status, normally it will show like bellow (Omitted some fields): Device: ... avgrq-sz avgqu-sz await r_await w_await svctm %util sdd ... 15.89 0.53 1.82 0.20 2.23 1.81 52.30 bcache0 ... 15.89 115.42 0.00 0.00 0.00 2.40 69.60 but after IO stopped, there are still very big avgqu-sz and %util values as bellow: Device: ... avgrq-sz avgqu-sz await r_await w_await svctm %util bcache0 ... 0 5326.32 0.00 0.00 0.00 0.00 100.10 The reason for this issue is that, only generic_start_io_acct() called and no generic_end_io_acct() called for detached device in cached_dev_make_request(). See the code: //start generic_start_io_acct() generic_start_io_acct(q, rw, bio_sectors(bio), &d->disk->part0); if (cached_dev_get(dc)) { //will callback generic_end_io_acct() } else { //will not call generic_end_io_acct() } This patch calls generic_end_io_acct() in the end of IO for detached devices, so we can show IO state correctly. (Modified to use GFP_NOIO in kzalloc() by Coly Li) Changelog: v2: fix typo. v1: the initial version. Signed-off-by: -
Coly Li authored
When there are too many I/O errors on cache device, current bcache code will retire the whole cache set, and detach all bcache devices. But the detached bcache devices are not stopped, which is problematic when bcache is in writeback mode. If the retired cache set has dirty data of backing devices, continue writing to bcache device will write to backing device directly. If the LBA of write request has a dirty version cached on cache device, next time when the cache device is re-registered and backing device re-attached to it again, the stale dirty data on cache device will be written to backing device, and overwrite latest directly written data. This situation causes a quite data corruption. But we cannot simply stop all attached bcache devices when the cache set is broken or disconnected. For example, use bcache to accelerate performance of an email service. In such workload, if cache device is broken but no dirty data lost, keep the bcache device alive and permit email service continue to access user data might be a better solution for the cache device failure. Nix <nix@esperi.org.uk> points out the issue and provides the above example to explain why it might be necessary to not stop bcache device for broken cache device. Pavel Goran <via-bcache@pvgoran.name> provides a brilliant suggestion to provide "always" and "auto" options to per-cached device sysfs file stop_when_cache_set_failed. If cache set is retiring and the backing device has no dirty data on cache, it should be safe to keep the bcache device alive. In this case, if stop_when_cache_set_failed is set to "auto", the device failure handling code will not stop this bcache device and permit application to access the backing device with a unattached bcache device. Changelog: [mlyle: edited to not break string constants across lines] v3: fix typos pointed out by Nix. v2: change option values of stop_when_cache_set_failed from 1/0 to "auto"/"always". v1: initial version, stop_when_cache_set_failed can be 0 (not stop) or 1 (always stop). Signed-off-by: -
Coly Li authored
When too many I/Os failed on cache device, bch_cache_set_error() is called in the error handling code path to retire whole problematic cache set. If new I/O requests continue to come and take refcount dc->count, the cache set won't be retired immediately, this is a problem. Further more, there are several kernel thread and self-armed kernel work may still running after bch_cache_set_error() is called. It needs to wait quite a while for them to stop, or they won't stop at all. They also prevent the cache set from being retired. The solution in this patch is, to add per cache set flag to disable I/O request on this cache and all attached backing devices. Then new coming I/O requests can be rejected in *_make_request() before taking refcount, kernel threads and self-armed kernel worker can stop very fast when flags bit CACHE_SET_IO_DISABLE is set. Because bcache also do internal I/Os for writeback, garbage collection, bucket allocation, journaling, this kind of I/O should be disabled after bch_cache_set_error() is called. So closure_bio_submit() is modified to check whether CACHE_SET_IO_DISABLE is set on cache_set->flags. If set, closure_bio_submit() will set bio->bi_status to BLK_STS_IOERR and return, generic_make_request() won't be called. A sysfs interface is also added to set or clear CACHE_SET_IO_DISABLE bit from cache_set->flags, to disable or enable cache set I/O for debugging. It is helpful to trigger more corner case issues for failed cache device. Changelog v4, add wait_for_kthread_stop(), and call it before exits writeback and gc kernel threads. v3, change CACHE_SET_IO_DISABLE from 4 to 3, since it is bit index. remove "bcache: " prefix when printing out kernel message. v2, more changes by previous review, - Use CACHE_SET_IO_DISABLE of cache_set->flags, suggested by Junhui. - Check CACHE_SET_IO_DISABLE in bch_btree_gc() to stop a while-loop, this is reported and inspired from origal patch of Pavel Vazharov. v1, initial version. Signed-off-by: -
Coly Li authored
struct delayed_work writeback_rate_update in struct cache_dev is a delayed worker to call function update_writeback_rate() in period (the interval is defined by dc->writeback_rate_update_seconds). When a metadate I/O error happens on cache device, bcache error handling routine bch_cache_set_error() will call bch_cache_set_unregister() to retire whole cache set. On the unregister code path, this delayed work is stopped by calling cancel_delayed_work_sync(&dc->writeback_rate_update). dc->writeback_rate_update is a special delayed work from others in bcache. In its routine update_writeback_rate(), this delayed work is re-armed itself. That means when cancel_delayed_work_sync() returns, this delayed work can still be executed after several seconds defined by dc->writeback_rate_update_seconds. The problem is, after cancel_delayed_work_sync() returns, the cache set unregister code path will continue and release memory of struct cache set. Then the delayed work is scheduled to run, __update_writeback_rate() will reference the already released cache_set memory, and trigger a NULL pointer deference fault. This patch introduces two more bcache device flags, - BCACHE_DEV_WB_RUNNING bit set: bcache device is in writeback mode and running, it is OK for dc->writeback_rate_update to re-arm itself. bit clear:bcache device is trying to stop dc->writeback_rate_update, this delayed work should not re-arm itself and quit. - BCACHE_DEV_RATE_DW_RUNNING bit set: routine update_writeback_rate() is executing. bit clear: routine update_writeback_rate() quits. This patch also adds a function cancel_writeback_rate_update_dwork() to wait for dc->writeback_rate_update quits before cancel it by calling cancel_delayed_work_sync(). In order to avoid a deadlock by unexpected quit dc->writeback_rate_update, after time_out seconds this function will give up and continue to call cancel_delayed_work_sync(). And here I explain how this patch stops self re-armed delayed work properly with the above stuffs. update_writeback_rate() sets BCACHE_DEV_RATE_DW_RUNNING at its beginning and clears BCACHE_DEV_RATE_DW_RUNNING at its end. Before calling cancel_writeback_rate_update_dwork() clear flag BCACHE_DEV_WB_RUNNING. Before calling cancel_delayed_work_sync() wait utill flag BCACHE_DEV_RATE_DW_RUNNING is clear. So when calling cancel_delayed_work_sync(), dc->writeback_rate_update must be already re- armed, or quite by seeing BCACHE_DEV_WB_RUNNING cleared. In both cases delayed work routine update_writeback_rate() won't be executed after cancel_delayed_work_sync() returns. Inside update_writeback_rate() before calling schedule_delayed_work(), flag BCACHE_DEV_WB_RUNNING is checked before. If this flag is cleared, it means someone is about to stop the delayed work. Because flag BCACHE_DEV_RATE_DW_RUNNING is set already and cancel_delayed_work_sync() has to wait for this flag to be cleared, we don't need to worry about race condition here. If update_writeback_rate() is scheduled to run after checking BCACHE_DEV_RATE_DW_RUNNING and before calling cancel_delayed_work_sync() in cancel_writeback_rate_update_dwork(), it is also safe. Because at this moment BCACHE_DEV_WB_RUNNING is cleared with memory barrier. As I mentioned previously, update_writeback_rate() will see BCACHE_DEV_WB_RUNNING is clear and quit immediately. Because there are more dependences inside update_writeback_rate() to struct cache_set memory, dc->writeback_rate_update is not a simple self re-arm delayed work. After trying many different methods (e.g. hold dc->count, or use locks), this is the only way I can find which works to properly stop dc->writeback_rate_update delayed work. Changelog: v3: change values of BCACHE_DEV_WB_RUNNING and BCACHE_DEV_RATE_DW_RUNNING to bit index, for test_bit(). v2: Try to fix the race issue which is pointed out by Junhui. v1: The initial version for review Signed-off-by: -
Coly Li authored
In patch "bcache: fix cached_dev->count usage for bch_cache_set_error()", cached_dev_get() is called when creating dc->writeback_thread, and cached_dev_put() is called when exiting dc->writeback_thread. This modification works well unless people detach the bcache device manually by 'echo 1 > /sys/block/bcache<N>/bcache/detach' Because this sysfs interface only calls bch_cached_dev_detach() which wakes up dc->writeback_thread but does not stop it. The reason is, before patch "bcache: fix cached_dev->count usage for bch_cache_set_error()", inside bch_writeback_thread(), if cache is not dirty after writeback, cached_dev_put() will be called here. And in cached_dev_make_request() when a new write request makes cache from clean to dirty, cached_dev_get() will be called there. Since we don't operate dc->count in these locations, refcount d->count cannot be dropped after cache becomes clean, and cached_dev_detach_finish() won't be called to detach bcache device. This patch fixes the issue by checking whether BCACHE_DEV_DETACHING is set inside bch_writeback_thread(). If this bit is set and cache is clean (no existing writeback_keys), break the while-loop, call cached_dev_put() and quit the writeback thread. Please note if cache is still dirty, even BCACHE_DEV_DETACHING is set the writeback thread should continue to perform writeback, this is the original design of manually detach. It is safe to do the following check without locking, let me explain why, + if (!test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) && + (!atomic_read(&dc->has_dirty) || !dc->writeback_running)) { If the kenrel thread does not sleep and continue to run due to conditions are not updated in time on the running CPU core, it just consumes more CPU cycles and has no hurt. This should-sleep-but-run is safe here. We just focus on the should-run-but-sleep condition, which means the writeback thread goes to sleep in mistake while it should continue to run. 1, First of all, no matter the writeback thread is hung or not, kthread_stop() from cached_dev_detach_finish() will wake up it and terminate by making kthread_should_stop() return true. And in normal run time, bit on index BCACHE_DEV_DETACHING is always cleared, the condition !test_bit(BCACHE_DEV_DETACHING, &dc->disk.flags) is always true and can be ignored as constant value. 2, If one of the following conditions is true, the writeback thread should go to sleep, "!atomic_read(&dc->has_dirty)" or "!dc->writeback_running)" each of them independently controls the writeback thread should sleep or not, let's analyse them one by one. 2.1 condition "!atomic_read(&dc->has_dirty)" If dc->has_dirty is set from 0 to 1 on another CPU core, bcache will call bch_writeback_queue() immediately or call bch_writeback_add() which indirectly calls bch_writeback_queue() too. In bch_writeback_queue(), wake_up_process(dc->writeback_thread) is called. It sets writeback thread's task state to TASK_RUNNING and following an implicit memory barrier, then tries to wake up the writeback thread. In writeback thread, its task state is set to TASK_INTERRUPTIBLE before doing the condition check. If other CPU core sets the TASK_RUNNING state after writeback thread setting TASK_INTERRUPTIBLE, the writeback thread will be scheduled to run very soon because its state is not TASK_INTERRUPTIBLE. If other CPU core sets the TASK_RUNNING state before writeback thread setting TASK_INTERRUPTIBLE, the implict memory barrier of wake_up_process() will make sure modification of dc->has_dirty on other CPU core is updated and observed on the CPU core of writeback thread. Therefore the condition check will correctly be false, and continue writeback code without sleeping. 2.2 condition "!dc->writeback_running)" dc->writeback_running can be changed via sysfs file, every time it is modified, a following bch_writeback_queue() is alwasy called. So the change is always observed on the CPU core of writeback thread. If dc->writeback_running is changed from 0 to 1 on other CPU core, this condition check will observe the modification and allow writeback thread to continue to run without sleeping. Now we can see, even without a locking protection, multiple conditions check is safe here, no deadlock or process hang up will happen. I compose a separte patch because that patch "bcache: fix cached_dev->count usage for bch_cache_set_error()" already gets a "Reviewed-by:" from Hannes Reinecke. Also this fix is not trivial and good for a separate patch. Signed-off-by: -
Coly Li authored
When bcache metadata I/O fails, bcache will call bch_cache_set_error() to retire the whole cache set. The expected behavior to retire a cache set is to unregister the cache set, and unregister all backing device attached to this cache set, then remove sysfs entries of the cache set and all attached backing devices, finally release memory of structs cache_set, cache, cached_dev and bcache_device. In my testing when journal I/O failure triggered by disconnected cache device, sometimes the cache set cannot be retired, and its sysfs entry /sys/fs/bcache/<uuid> still exits and the backing device also references it. This is not expected behavior. When metadata I/O failes, the call senquence to retire whole cache set is, bch_cache_set_error() bch_cache_set_unregister() bch_cache_set_stop() __cache_set_unregister() <- called as callback by calling clousre_queue(&c->caching) cache_set_flush() <- called as a callback when refcount of cache_set->caching is 0 cache_set_free() <- called as a callback when refcount of catch_set->cl is 0 bch_cache_set_release() <- called as a callback when refcount of catch_set->kobj is 0 I find if kernel thread bch_writeback_thread() quits while-loop when kthread_should_stop() is true and searched_full_index is false, clousre callback cache_set_flush() set by continue_at() will never be called. The result is, bcache fails to retire whole cache set. cache_set_flush() will be called when refcount of closure c->caching is 0, and in function bcache_device_detach() refcount of closure c->caching is released to 0 by clousre_put(). In metadata error code path, function bcache_device_detach() is called by cached_dev_detach_finish(). This is a callback routine being called when cached_dev->count is 0. This refcount is decreased by cached_dev_put(). The above dependence indicates, cache_set_flush() will be called when refcount of cache_set->cl is 0, and refcount of cache_set->cl to be 0 when refcount of cache_dev->count is 0. The reason why sometimes cache_dev->count is not 0 (when metadata I/O fails and bch_cache_set_error() called) is, in bch_writeback_thread(), refcount of cache_dev is not decreased properly. In bch_writeback_thread(), cached_dev_put() is called only when searched_full_index is true and cached_dev->writeback_keys is empty, a.k.a there is no dirty data on cache. In most of run time it is correct, but when bch_writeback_thread() quits the while-loop while cache is still dirty, current code forget to call cached_dev_put() before this kernel thread exits. This is why sometimes cache_set_flush() is not executed and cache set fails to be retired. The reason to call cached_dev_put() in bch_writeback_rate() is, when the cache device changes from clean to dirty, cached_dev_get() is called, to make sure during writeback operatiions both backing and cache devices won't be released. Adding following code in bch_writeback_thread() does not work, static int bch_writeback_thread(void *arg) } + if (atomic_read(&dc->has_dirty)) + cached_dev_put() + return 0; } because writeback kernel thread can be waken up and start via sysfs entry: echo 1 > /sys/block/bcache<N>/bcache/writeback_running It is difficult to check whether backing device is dirty without race and extra lock. So the above modification will introduce potential refcount underflow in some conditions. The correct fix is, to take cached dev refcount when creating the kernel thread, and put it before the kernel thread exits. Then bcache does not need to take a cached dev refcount when cache turns from clean to dirty, or to put a cached dev refcount when cache turns from ditry to clean. The writeback kernel thread is alwasy safe to reference data structure from cache set, cache and cached device (because a refcount of cache device is taken for it already), and no matter the kernel thread is stopped by I/O errors or system reboot, cached_dev->count can always be used correctly. The patch is simple, but understanding how it works is quite complicated. Changelog: v2: set dc->writeback_thread to NULL in this patch, as suggested by Hannes. v1: initial version for review. Signed-off-by:
-
- 17 Mar, 2018 3 commits
-
-
Christoph Hellwig authored
bio_check_eod() should check partition size not the whole disk if bio->bi_partno is non-zero. Do this by moving the call to bio_check_eod() into blk_partition_remap(). Based on an earlier patch from Jiufei Xue. Fixes: 74d46992 ("block: replace bi_bdev with a gendisk pointer and partitions index") Reported-by:
Jiufei Xue <jiufei.xue@linux.alibaba.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Bart Van Assche authored
It happens often while I'm preparing a patch for a block driver that I'm wondering: is a definition of SECTOR_SIZE and/or SECTOR_SHIFT available for this driver? Do I have to introduce definitions of these constants before I can use these constants? To avoid this confusion, move the existing definitions of SECTOR_SIZE and SECTOR_SHIFT into the <linux/blkdev.h> header file such that these become available for all block drivers. Make the SECTOR_SIZE definition in the uapi msdos_fs.h header file conditional to avoid that including that header file after <linux/blkdev.h> causes the compiler to complain about a SECTOR_SIZE redefinition. Note: the SECTOR_SIZE / SECTOR_SHIFT / SECTOR_BITS definitions have not been removed from uapi header files nor from NAND drivers in which these constants are used for another purpose than converting block layer offsets and sizes into a number of sectors. Cc: David S. Miller <davem@davemloft.net> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Reviewed-by:
Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Reviewed-by:
Johannes Thumshirn <jthumshirn@suse.de> Reviewed-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Bart Van Assche authored
Since commit 634f9e46 ("blk-mq: remove REQ_ATOM_COMPLETE usages from blk-mq") blk_rq_is_complete() only reports whether or not a request has completed for legacy queues. Hence modify the blk-mq-debugfs code such that it shows the blk-mq request state again. Fixes: 634f9e46 ("blk-mq: remove REQ_ATOM_COMPLETE usages from blk-mq") Signed-off-by:
-
- 16 Mar, 2018 2 commits
-
-
Joseph Qi authored
We've triggered a WARNING in blk_throtl_bio() when throttling writeback io, which complains blkg->refcnt is already 0 when calling blkg_get(), and then kernel crashes with invalid page request. After investigating this issue, we've found it is caused by a race between blkcg_bio_issue_check() and cgroup_rmdir(), which is described below: writeback kworker cgroup_rmdir cgroup_destroy_locked kill_css css_killed_ref_fn css_killed_work_fn offline_css blkcg_css_offline blkcg_bio_issue_check rcu_read_lock blkg_lookup spin_trylock(q->queue_lock) blkg_destroy spin_unlock(q->queue_lock) blk_throtl_bio spin_lock_irq(q->queue_lock) ... spin_unlock_irq(q->queue_lock) rcu_read_unlock Since rcu can only prevent blkg from releasing when it is being used, the blkg->refcnt can be decreased to 0 during blkg_destroy() and schedule blkg release. Then trying to blkg_get() in blk_throtl_bio() will complains the WARNING. And then the corresponding blkg_put() will schedule blkg release again, which result in double free. This race is introduced by commit ae118896 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()"). Before this commit, it will lookup first and then try to lookup/create again with queue_lock. Since revive this logic is a bit drastic, so fix it by only offlining pd during blkcg_css_offline(), and move the rest destruction (especially blkg_put()) into blkcg_css_free(), which should be the right way as discussed. Fixes: ae118896 ("blkcg: consolidate blkg creation in blkcg_bio_issue_check()") Reported-by:Joseph Qi <joseph.qi@linux.alibaba.com> Acked-by:
Tejun Heo <tj@kernel.org> Signed-off-by:
-
Jonas Rabenstein authored
The length must be given as bytes and not as 4 bit tuples. Reviewed-by:
Scott Bauer <scott.bauer@intel.com> Signed-off-by:
Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de> Signed-off-by:
-
- 13 Mar, 2018 3 commits
-
-
Christoph Hellwig authored
The current BSG design tries to shoe-horn the transport-specific passthrough commands into the overall framework for SCSI passthrough requests. This has a couple problems: - each passthrough queue has to set the QUEUE_FLAG_SCSI_PASSTHROUGH flag despite not dealing with SCSI commands at all. Because of that these queues could also incorrectly accept SCSI commands from in-kernel users or through the legacy SCSI_IOCTL_SEND_COMMAND ioctl. - the real SCSI bsg queues also incorrectly accept bsg requests of the BSG_SUB_PROTOCOL_SCSI_TRANSPORT type - the bsg transport code is almost unredable because it tries to reuse different SCSI concepts for its own purpose. This patch instead adds a new bsg_ops structure to handle the two cases differently, and thus solves all of the above problems. Another side effect is that the bsg-lib queues also don't need to embedd a struct scsi_request anymore. Signed-off-by:
-
Christoph Hellwig authored
Users of the bsg-lib interface should only use the bsg_job data structure and not know about implementation details of it. Signed-off-by:
Benjamin Block <bblock@linux.vnet.ibm.com> Reviewed-by:
-
Christoph Hellwig authored
The zfcp driver wants to know the timeout for a bsg job, so add a field to struct bsg_job for it in preparation of not exposing the request to the bsg-lib users. Signed-off-by:
-
- 12 Mar, 2018 2 commits
-
-
Nikolay Borisov authored
This flag was added by fe0f07d0 ("direct-io: only inc/deci inode->i_dio_count for file systems") as means to optimise the atomic modificaiton of the variable for blockdevices. However with the advent of 542ff7bf ("block: new direct I/O implementation") it became unused. So let's remove it. Reviewed-by:
Nikolay Borisov <nborisov@suse.com> Signed-off-by:
-
Nikolay Borisov authored
This flag was added by 60392573 ("direct-io: add flag to allow aio writes beyond i_size") to support XFS. However, with the rework of XFS' DIO's path to use iomap in acdda3aa ("xfs: use iomap_dio_rw") it became redundant. So let's remove it. Reviewed-by:
-
- 09 Mar, 2018 5 commits
-
-
Ross Zwisler authored
To help folks like me that use scripts/get_maintainer.pl. Signed-off-by:
Ross Zwisler <ross.zwisler@linux.intel.com> Signed-off-by:
-
Bart Van Assche authored
Avoid that building with W=1 causes the kernel-doc tool to complain about undocumented function arguments for the blk-zoned.c source file. Signed-off-by:
-
Maurizio Lombardi authored
when mounting an ISO filesystem sometimes (very rarely) the system hangs because of a race condition between two tasks. PID: 6766 TASK: ffff88007b2a6dd0 CPU: 0 COMMAND: "mount" #0 [ffff880078447ae0] __schedule at ffffffff8168d605 #1 [ffff880078447b48] schedule_preempt_disabled at ffffffff8168ed49 #2 [ffff880078447b58] __mutex_lock_slowpath at ffffffff8168c995 #3 [ffff880078447bb8] mutex_lock at ffffffff8168bdef #4 [ffff880078447bd0] sr_block_ioctl at ffffffffa00b6818 [sr_mod] #5 [ffff880078447c10] blkdev_ioctl at ffffffff812fea50 #6 [ffff880078447c70] ioctl_by_bdev at ffffffff8123a8b3 #7 [ffff880078447c90] isofs_fill_super at ffffffffa04fb1e1 [isofs] #8 [ffff880078447da8] mount_bdev at ffffffff81202570 #9 [ffff880078447e18] isofs_mount at ffffffffa04f9828 [isofs] #10 [ffff880078447e28] mount_fs at ffffffff81202d09 #11 [ffff880078447e70] vfs_kern_mount at ffffffff8121ea8f #12 [ffff880078447ea8] do_mount at ffffffff81220fee #13 [ffff880078447f28] sys_mount at ffffffff812218d6 #14 [ffff880078447f80] system_call_fastpath at ffffffff81698c49 RIP: 00007fd9ea914e9a RSP: 00007ffd5d9bf648 RFLAGS: 00010246 RAX: 00000000000000a5 RBX: ffffffff81698c49 RCX: 0000000000000010 RDX: 00007fd9ec2bc210 RSI: 00007fd9ec2bc290 RDI: 00007fd9ec2bcf30 RBP: 0000000000000000 R8: 0000000000000000 R9: 0000000000000010 R10: 00000000c0ed0001 R11: 0000000000000206 R12: 00007fd9ec2bc040 R13: 00007fd9eb6b2380 R14: 00007fd9ec2bc210 R15: 00007fd9ec2bcf30 ORIG_RAX: 00000000000000a5 CS: 0033 SS: 002b This task was trying to mount the cdrom. It allocated and configured a super_block struct and owned the write-lock for the super_block->s_umount rwsem. While exclusively owning the s_umount lock, it called sr_block_ioctl and waited to acquire the global sr_mutex lock. PID: 6785 TASK: ffff880078720fb0 CPU: 0 COMMAND: "systemd-udevd" #0 [ffff880078417898] __schedule at ffffffff8168d605 #1 [ffff880078417900] schedule at ffffffff8168dc59 #2 [ffff880078417910] rwsem_down_read_failed at ffffffff8168f605 #3 [ffff880078417980] call_rwsem_down_read_failed at ffffffff81328838 #4 [ffff8800784179d0] down_read at ffffffff8168cde0 #5 [ffff8800784179e8] get_super at ffffffff81201cc7 #6 [ffff880078417a10] __invalidate_device at ffffffff8123a8de #7 [ffff880078417a40] flush_disk at ffffffff8123a94b #8 [ffff880078417a88] check_disk_change at ffffffff8123ab50 #9 [ffff880078417ab0] cdrom_open at ffffffffa00a29e1 [cdrom] #10 [ffff880078417b68] sr_block_open at ffffffffa00b6f9b [sr_mod] #11 [ffff880078417b98] __blkdev_get at ffffffff8123ba86 #12 [ffff880078417bf0] blkdev_get at ffffffff8123bd65 #13 [ffff880078417c78] blkdev_open at ffffffff8123bf9b #14 [ffff880078417c90] do_dentry_open at ffffffff811fc7f7 #15 [ffff880078417cd8] vfs_open at ffffffff811fc9cf #16 [ffff880078417d00] do_last at ffffffff8120d53d #17 [ffff880078417db0] path_openat at ffffffff8120e6b2 #18 [ffff880078417e48] do_filp_open at ffffffff8121082b #19 [ffff880078417f18] do_sys_open at ffffffff811fdd33 #20 [ffff880078417f70] sys_open at ffffffff811fde4e #21 [ffff880078417f80] system_call_fastpath at ffffffff81698c49 RIP: 00007f29438b0c20 RSP: 00007ffc76624b78 RFLAGS: 00010246 RAX: 0000000000000002 RBX: ffffffff81698c49 RCX: 0000000000000000 RDX: 00007f2944a5fa70 RSI: 00000000000a0800 RDI: 00007f2944a5fa70 RBP: 00007f2944a5f540 R8: 0000000000000000 R9: 0000000000000020 R10: 00007f2943614c40 R11: 0000000000000246 R12: ffffffff811fde4e R13: ffff880078417f78 R14: 000000000000000c R15: 00007f2944a4b010 ORIG_RAX: 0000000000000002 CS: 0033 SS: 002b This task tried to open the cdrom device, the sr_block_open function acquired the global sr_mutex lock. The call to check_disk_change() then saw an event flag indicating a possible media change and tried to flush any cached data for the device. As part of the flush, it tried to acquire the super_block->s_umount lock associated with the cdrom device. This was the same super_block as created and locked by the previous task. The first task acquires the s_umount lock and then the sr_mutex_lock; the second task acquires the sr_mutex_lock and then the s_umount lock. This patch fixes the issue by moving check_disk_change() out of cdrom_open() and let the caller take care of it. Signed-off-by:Maurizio Lombardi <mlombard@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Apparently the LaTex abbreviation for the German "sharp s" (ß) (Unicode U+00DF) has changed from {\sz} to {\ss}. With {\sz}, I get this error at line 1016 (line number after another patch): ! Undefined control sequence. l.1016 ...nel~2.0. Further thanks to Heiko Ei{\sz }feldt, This is fixed by changing the {\sz} to {\ss}. Signed-off-by:Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Randy Dunlap authored
Documentation updates for Documentation/cdrom/cdrom-standard.tex: cdrom_device_ops: - add check_events() and generic_packet() cdrom_device_info: - add one 'const' modifier - correct some field descriptions - add some missing fields - drop 'kdev_t dev;' field Also drop <n_discs> sentence from documentation because it is not referenced anywhere in the kernel header or C files. Signed-off-by:
-
- 08 Mar, 2018 9 commits
-
-
Bart Van Assche authored
This patch helps to avoid that new code gets introduced in block drivers that manipulates queue flags without holding the queue lock when that lock should be held. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Since it is not safe to use queue_flag_(set|clear)_unlocked() without holding the queue lock after the sysfs entries for a queue have been created, complain if this happens. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
This patch has been generated as follows: for verb in set_unlocked clear_unlocked set clear; do replace-in-files queue_flag_${verb} blk_queue_flag_${verb%_unlocked} \ $(git grep -lw queue_flag_${verb} drivers block/bsg*) done Except for protecting all queue flag changes with the queue lock this patch does not change any functionality. Cc: Mike Snitzer <snitzer@redhat.com> Cc: Shaohua Li <shli@fb.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Signed-off-by: -
Bart Van Assche authored
Use blk_queue_flag_set() instead of open-coding this function. Cc: Nicholas A. Bellinger <nab@linux-iscsi.org> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Use blk_queue_flag_set() instead of open-coding this function. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Acked-by:
-
Bart Van Assche authored
Use the blk_queue_flag_{set,clear}() functions instead of open-coding these. Cc: Kent Overstreet <kent.overstreet@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by: -
Bart Van Assche authored
Use the blk_queue_flag_*() functions instead of open-coding these. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Since the queue flags may be changed concurrently from multiple contexts after a queue becomes visible in sysfs, make these changes safe by protecting these with the queue lock. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
Bart Van Assche authored
Introduce functions that modify the queue flags and that protect these modifications with the request queue lock. Except for moving one wake_up_all() call from inside to outside a critical section, this patch does not change any functionality. Cc: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Ming Lei <ming.lei@redhat.com> Reviewed-by:
-
