- 11 Oct, 2017 11 commits
-
-
Mauro Carvalho Chehab authored
This driver doesn't implement support for set_property(). Yet, it implements a boilerplate for it. Get rid of it. Signed-off-by:Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Sean Young authored
Without device tree, there is no way to use this driver. Signed-off-by:
Sean Young <sean@mess.org> Acked-by:
Andi Shyti <andi.shyti@samsung.com> Signed-off-by:
-
Sean Young authored
The ioctl LIRC_SET_REC_TIMEOUT would set a timeout of 704ns if called with a timeout of 4294968us. Cc: <stable@vger.kernel.org> Signed-off-by:
-
Marc Gonzalez authored
Add DT binding for the HW IR decoder embedded in SMP86xx/SMP87xx. Signed-off-by:
Marc Gonzalez <marc_gonzalez@sigmadesigns.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Mans Rullgard authored
The tango HW IR decoder supports NEC, RC-5, RC-6 protocols. Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
Marc Gonzalez authored
Add a keymap for the Sigma Designs Vantage (dev board) remote control. Signed-off-by:
-
Sean Young authored
Without device tree, there is no way to use this driver. Signed-off-by:
-
Sean Young authored
Without device tree, there is no way to use this driver. Signed-off-by:
-
Sean Young authored
If the kernel is built without device tree, this driver cannot be used and without gpiolib it cannot control any gpio pin. Signed-off-by:
-
Sean Young authored
When receiving an nec repeat, rc_repeat() is called and then rc_keydown() with the last decoded scancode. That last call is redundant. Fixes: 265a2988 ("media: rc-core: consistent use of rc_repeat()") Cc: <stable@vger.kernel.org> # v4.14 Signed-off-by:
-
David Härdeman authored
There are no users of this functionality (ir-lirc-codec.c has its own implementation and lirc_zilog.c doesn't use it) so remove it. This only affects users of the lirc kapi, not rc-core drivers. Signed-off-by:
David Härdeman <david@hardeman.nu> Signed-off-by:
-
- 05 Oct, 2017 1 commit
-
-
Ladislav Michl authored
The 0-day robot reports: drivers/media/rc/gpio-ir-recv.c: In function 'gpio_ir_recv_irq': >> drivers/media/rc/gpio-ir-recv.c:38:8: error: implicit declaration of function 'gpiod_get_value' [-Werror=implicit-function-declaration] Fixes: eed008e6 ("[media] media: rc: gpio-ir-recv: use gpiolib API") For some reason only partial patch was applied. Also include gpio/consumer.h otherwise compile test fails. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Ladislav Michl <ladis@linux-mips.org> Acked-by:
-
- 04 Oct, 2017 28 commits
-
-
Sakari Ailus authored
The clock control is not explicitly controlled by the driver in two cases: ACPI based systems and when the clock is part of the power sequence of the camera module. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com>
-
Sakari Ailus authored
Obtain the clock rate from the clock framework if it's not available through DT. The assumption is that the parent device (camera module) defines the rate as clock control is a part of the power on and power off sequences --- which are camera module specific. Also use the clock rate from DT if no clock is provided. Signed-off-by:
-
Sakari Ailus authored
The external clock frequency was set by the driver but the obtained frequency was never verified. Do that. Being able to obtain the exact frequency is important as the value is used for PLL calculations which may result in frequencies that violate the PLL tree limits. Signed-off-by:
-
Sakari Ailus authored
The error handling code in smiapp_power_on() returned in case of a failed I2C write instead of cleaning up the mess. Fix this. Signed-off-by:
-
Sakari Ailus authored
ov13858 contained a 64-bit division. Use do_div() for calculating it. Signed-off-by:
Chiranjeevi Rapolu <chiranjeevi.rapolu@intel.com> Signed-off-by:
-
Chiranjeevi Rapolu authored
Previously, with crop (0, 0), (4255, 3167), VTS < 0xC9E was resulting in blank frames sometimes. This appeared as video flickering. But we need VTS < 0xC9E to get ~30fps. Omni Vision recommends to use crop (0,8), (4255, 3159) for 4224x3136. With this crop, VTS 0xC8E is supported and yields ~30fps. Signed-off-by:
Tomasz Figa <tfiga@chromium.org> Signed-off-by:
-
Chiranjeevi Rapolu authored
Calculate pixel-rate at run time instead of compile time. Instead of using hardcoded pixels-per-line, extract it from current sensor mode. Signed-off-by:
-
Colin Ian King authored
Don't populate the array reset_seq on the stack, instead make it static. Makes the object code smaller by over 50 bytes: Before: text data bss dec hex filename 11737 6000 64 17801 4589 drivers/media/i2c/ov2640.o After: text data bss dec hex filename 11582 6096 64 17742 454e drivers/media/i2c/ov2640.o Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Sakari Ailus authored
The active and has_no_links arrays will overrun in media_entity_pipeline_start() if there's an entity which has more than MEDIA_ENTITY_MAX_PAD pads. Ensure in media_entity_init() that there are fewer pads than that. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Markus Elfring authored
Replace the specification of a data structure by pointer dereferences as the parameter for the operator "sizeof" to make size determination a bit safer according to the Linux coding style convention. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: merged similar patches] Signed-off-by:
Markus Elfring <elfring@users.sourceforge.net> Signed-off-by:
-
Markus Elfring authored
Omit extra messages for memory allocation failures. This issue was detected by using the Coccinelle software. [mchehab@s-opensource.com: merged similar patches] Signed-off-by:
-
Chiranjeevi Rapolu authored
Previously, the sensor was not streaming after resume from suspend, i.e. on S0->S3->S0 transition. Due to this, camera app preview appeared as stuck. Now, handle streaming state correctly in case of suspend-resume. Signed-off-by:
-
Rajmohan Mani authored
Current v4l2 focus ctrl step value of 16, limits the minimum granularity of focus positions to 16. Setting this value as 1, enables more accurate focus positions. Signed-off-by:
Rajmohan Mani <rajmohan.mani@intel.com> Signed-off-by:
-
Fabio Estevam authored
clk_prepare_enable() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Fabio Estevam authored
devm_clk_get() may return different error codes other than -EPROBE_DEFER, so it is better to return the real error code instead. Signed-off-by:
-
Fabio Estevam authored
v4l2_clk_get() may return different error codes other than -EPROBE_DEFER, so it is better to return the real error code instead. Signed-off-by:
-
Chiranjeevi Rapolu authored
Previously, images were relatively darker due to non-optimal settings for black target level and bias. Now, use recommended settings for black target level and output bias as default values. The same default settings apply to all the resolutions. Given these recommeneded settings do not change dynamically, add these to existing mode register settings. Signed-off-by:
-
Hans Verkuil authored
If you have a control handler that does not contain any controls, then currently calling VIDIOC_G/S/TRY_EXT_CTRLS with count == 0 will return -EINVAL in the class_check() function. This is not correct, there is no reason why this should return an error. The purpose of setting count to 0 is to test if the ioctl can mix controls from different control classes. And this is possible. The fact that there are not actually any controls defined is another matter that is unrelated to this test. This caused v4l2-compliance to fail, so that is fixed with this patch applied. Signed-off-by:
Dave Stevenson <dave.stevenson@raspberrypi.org> Tested-by:
-
Hans Verkuil authored
Only send HPD_LOW/HIGH event if the gpio actually changed value. Signed-off-by:
-
Johan Hovold authored
Make sure to check that we actually have an Interface Association Descriptor before dereferencing it during probe to avoid dereferencing a NULL-pointer. Fixes: e0d3bafd ("V4L/DVB (10954): Add cx231xx USB driver") Cc: stable <stable@vger.kernel.org> # 2.6.30 Reported-by:
Andrey Konovalov <andreyknvl@google.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Tested-by:
-
Kees Cook authored
This converts to use setup_timer() to set callback and data, though it doesn't look like this would have worked with timer checking enabled since no init_timer() was ever called before. Cc: Mats Randgaard <matrandg@cisco.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Hans Verkuil authored
Add support for 10 and 12 bit luma formats. Signed-off-by:
Hans Verkuil <hansverk@cisco.com> Signed-off-by:
-
Hans Verkuil authored
Support the 10 and 12 bit luma formats. Signed-off-by:
-
Arnd Bergmann authored
Older compilers like gcc-4.6 may run into a case that returns an uninitialized variable from rcar_drif_enable_rx() if that function was ever called with an empty cur_ch_mask: drivers/media/platform/rcar_drif.c:658:2: error: ‘ret’ may be used uninitialized in this function [-Werror=uninitialized] Newer compilers don't have that problem as they optimize the 'ret' variable away and just return zero in that case. This changes the function to return -EINVAL for this particular failure, to make it consistent across all compiler versions. In case gcc gets changed to report a warning for it in the future, it's also a good idea to shut it up now. Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82203Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Ramesh Shanmugasundaram <ramesh.shanmugasundaram@bp.renesas.com> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are not modified in the file referencing them. They are only used when their function pointer fields invokes a function and therefore none of the structure fields are getting modified. Also, add a const to the declaration in the header. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Colin Ian King authored
Don't populate const arrays on the stack, instead make them static. Makes the object code smaller by over 5200 bytes: Before: text data bss dec hex filename 58259 8880 128 67267 106c3 ov519.o After: text data bss dec hex filename 52155 9776 128 62059 f26b ov519.o Signed-off-by:
-
Simon Yuan authored
The video standard was not mapped to the corresponding value of the internal video standard in adv748x_afe_querystd, causing the wrong video standard to be selected. Fixes: 3e89586a ("media: i2c: adv748x: add adv748x driver") [Kieran: Obtain the std from the afe->curr_norm] Signed-off-by:
Simon Yuan <simon.yuan@navico.com> Signed-off-by:
Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by:
-
Christophe JAILLET authored
If this memory allocation fails, we must release some resources, as already done in the code below and above. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
