- 05 Oct, 2014 40 commits
-
-
Miklos Szeredi authored
commit b928095b upstream. If overwriting an empty directory with rename, then need to drop the extra nlink. Test prog: #include <stdio.h> #include <fcntl.h> #include <err.h> #include <sys/stat.h> int main(void) { const char *test_dir1 = "test-dir1"; const char *test_dir2 = "test-dir2"; int res; int fd; struct stat statbuf; res = mkdir(test_dir1, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir1); res = mkdir(test_dir2, 0777); if (res == -1) err(1, "mkdir(\"%s\")", test_dir2); fd = open(test_dir2, O_RDONLY); if (fd == -1) err(1, "open(\"%s\")", test_dir2); res = rename(test_dir1, test_dir2); if (res == -1) err(1, "rename(\"%s\", \"%s\")", test_dir1, test_dir2); res = fstat(fd, &statbuf); if (res == -1) err(1, "fstat(%i)", fd); if (statbuf.st_nlink != 0) { fprintf(stderr, "nlink is %lu, should be 0\n", statbuf.st_nlink); return 1; } return 0; } Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Dave Young authored
commit 3eddc69f upstream. 3.16 kernel boot fail with earlyprintk=efi, it keeps scrolling at the bottom line of screen. Bisected, the first bad commit is below: commit 86dfc6f3 Author: Lv Zheng <lv.zheng@intel.com> Date: Fri Apr 4 12:38:57 2014 +0800 ACPICA: Tables: Fix table checksums verification before installation. I did some debugging by enabling both serial and efi earlyprintk, below is some debug dmesg, seems early_ioremap fails in scroll up function due to no free slot, see below dmesg output: WARNING: CPU: 0 PID: 0 at mm/early_ioremap.c:116 __early_ioremap+0x90/0x1c4() __early_ioremap(ed00c800, 00000c80) not found slot Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 3.17.0-rc1+ #204 Hardware name: Hewlett-Packard HP Z420 Workstation/1589, BIOS J61 v03.15 05/09/2013 Call Trace: dump_stack+0x4e/0x7a warn_slowpath_common+0x75/0x8e ? __early_ioremap+0x90/0x1c4 warn_slowpath_fmt+0x47/0x49 __early_ioremap+0x90/0x1c4 ? sprintf+0x46/0x48 early_ioremap+0x13/0x15 early_efi_map+0x24/0x26 early_efi_scroll_up+0x6d/0xc0 early_efi_write+0x1b0/0x214 call_console_drivers.constprop.21+0x73/0x7e console_unlock+0x151/0x3b2 ? vprintk_emit+0x49f/0x532 vprintk_emit+0x521/0x532 ? console_unlock+0x383/0x3b2 printk+0x4f/0x51 acpi_os_vprintf+0x2b/0x2d acpi_os_printf+0x43/0x45 acpi_info+0x5c/0x63 ? __acpi_map_table+0x13/0x18 ? acpi_os_map_iomem+0x21/0x147 acpi_tb_print_table_header+0x177/0x186 acpi_tb_install_table_with_override+0x4b/0x62 acpi_tb_install_standard_table+0xd9/0x215 ? early_ioremap+0x13/0x15 ? __acpi_map_table+0x13/0x18 acpi_tb_parse_root_table+0x16e/0x1b4 acpi_initialize_tables+0x57/0x59 acpi_table_init+0x50/0xce acpi_boot_table_init+0x1e/0x85 setup_arch+0x9b7/0xcc4 start_kernel+0x94/0x42d ? early_idt_handlers+0x120/0x120 x86_64_start_reservations+0x2a/0x2c x86_64_start_kernel+0xf3/0x100 Quote reply from Lv.zheng about the early ioremap slot usage in this case: """ In early_efi_scroll_up(), 2 mapping entries will be used for the src/dst screen buffer. In drivers/acpi/acpica/tbutils.c, we've improved the early table loading code in acpi_tb_parse_root_table(). We now need 2 mapping entries: 1. One mapping entry is used for RSDT table mapping. Each RSDT entry contains an address for another ACPI table. 2. For each entry in RSDP, we need another mapping entry to map the table to perform necessary check/override before installing it. When acpi_tb_parse_root_table() prints something through EFI earlyprintk console, we'll have 4 mapping entries used. The current 4 slots setting of early_ioremap() seems to be too small for such a use case. """ Thus increase the slot to 8 in this patch to fix this issue. boot-time mappings become 512 page with this patch. Signed-off-by:
Dave Young <dyoung@redhat.com> Signed-off-by:
Matt Fleming <matt.fleming@intel.com> Signed-off-by:
-
Marcelo Tosatti authored
commit 8915aa27 upstream. Its possible that idivl overflows (due to large delta stored in usdiff, valid scenario). Create an exception handler to catch the overflow exception (division by zero is protected by vcpu->arch.virtual_tsc_khz check), and interpret it accordingly (delta is larger than USEC_PER_SEC). Fixes https://bugzilla.redhat.com/show_bug.cgi?id=969644Signed-off-by:
Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by:
Gleb Natapov <gleb@redhat.com> Signed-off-by:
Philipp Hahn <hahn@univention.de> Tested-by:
-
Mark Brown authored
commit 5844a8b9 upstream. A previous over-zealous factorisation of code means that we only treat registers as volatile if they are readable. For most devices this is fine since normally most registers can be read and volatility implies readability but for format_write() devices where there is no readback from the hardware and we use volatility to mean simply uncacheability this means that we end up treating all registers as cacheble. A bigger refactoring of the code to clarify this is in order but as a fix make a minimal change and only check readability when checking volatility if there is no format_write() operation defined for the device. Signed-off-by:
Mark Brown <broonie@linaro.org> Tested-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Bob Moore authored
commit 75ec6e55 upstream. Changes to correct several GPIO issues: 1) The update_rule in a GPIO field definition is now ignored; a read-modify-write operation is never performed for GPIO fields. (Internally, this means that the field assembly/disassembly code is completely bypassed for GPIO.) 2) The Address parameter passed to a GPIO region handler is now the bit offset of the field from a previous Connection() operator. Thus, it becomes a "Pin Number Index" into the Connection() resource descriptor. 3) The bit_width parameter passed to a GPIO region handler is now the exact bit width of the GPIO field. Thus, it can be interpreted as "number of pins". Overall, we can now say that the region handler interface to GPIO handlers is a raw "bit/pin" addressed interface, not a byte-addressed interface like the system_memory handler interface. Signed-off-by:
Bob Moore <robert.moore@intel.com> Signed-off-by:
Lv Zheng <lv.zheng@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Markos Chandras authored
commit 8a574cfa upstream. Every mcount() call in the MIPS 32-bit kernel is done as follows: [...] move at, ra jal _mcount addiu sp, sp, -8 [...] but upon returning from the mcount() function, the stack pointer is not adjusted properly. This is explained in details in 58b69401 (MIPS: Function tracer: Fix broken function tracing). Commit ad8c3969 ("MIPS: Unbreak function tracer for 64-bit kernel.) fixed the stack manipulation for 64-bit but it didn't fix it completely for MIPS32. Signed-off-by:
Markos Chandras <markos.chandras@imgtec.com> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7792/Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
-
Aurelien Jarno authored
commit 29593fd5 upstream. Commit dc4d7b37 (MIPS: ZBOOT: gather string functions into string.c) moved the string related functions into a separate file, which might cause the following build error, depending on the configuration: | CC arch/mips/boot/compressed/decompress.o | In file included from linux/arch/mips/boot/compressed/../../../../lib/decompress_unxz.c:234:0, | from linux/arch/mips/boot/compressed/decompress.c:67: | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c: In function 'fill_temp': | linux/arch/mips/boot/compressed/../../../../lib/xz/xz_dec_stream.c:162:2: error: implicit declaration of function 'memcpy' [-Werror=implicit-function-declaration] | cc1: some warnings being treated as errors | linux/scripts/Makefile.build:308: recipe for target 'arch/mips/boot/compressed/decompress.o' failed | make[6]: *** [arch/mips/boot/compressed/decompress.o] Error 1 | linux/arch/mips/Makefile:308: recipe for target 'vmlinuz' failed It does not fail with the standard configuration, as when CONFIG_DYNAMIC_DEBUG is not enabled <linux/string.h> gets included in include/linux/dynamic_debug.h. There might be other ways for it to get indirectly included. We can't add the include directly in xz_dec_stream.c as some architectures might want to use a different version for the boot/ directory (see for example arch/x86/boot/string.h). Signed-off-by:
Aurelien Jarno <aurelien@aurel32.net> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/7420/Signed-off-by:
-
Robin Murphy authored
commit 5ca918e5 upstream. The alignment fixup incorrectly decodes faulting ARM VLDn/VSTn instructions (where the optional alignment hint is given but incorrect) as LDR/STR, leading to register corruption. Detect these and correctly treat them as unhandled, so that userspace gets the fault it expects. Reported-by:
Simon Hosie <simon.hosie@arm.com> Signed-off-by:
Robin Murphy <robin.murphy@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Dave Martin authored
commit e2ccba49 upstream. Copying a function with memcpy() and then trying to execute the result isn't trivially portable to Thumb. This patch modifies the kexec soft restart code to copy its assembler trampoline relocate_new_kernel() using fncpy() instead, so that relocate_new_kernel can be in the same ISA as the rest of the kernel without problems. Signed-off-by:
Dave Martin <Dave.Martin@arm.com> Acked-by:
Will Deacon <will.deacon@arm.com> Reported-by:
Taras Kondratiuk <taras.kondratiuk@linaro.org> Tested-by:
Liu Hua <sdu.liu@huawei.com> Signed-off-by:
-
Sudeep Holla authored
commit a040803a upstream. Since commit 1dbfa187 ("ARM: irq migration: force migration off CPU going down") the ARM interrupt migration code on cpu offline calls irqchip.irq_set_affinity() with the argument force=true. At the point of this change the argument had no effect because it was not used by any interrupt chip driver and there was no semantics defined. This changed with commit 01f8fa4f ("genirq: Allow forcing cpu affinity of interrupts") which made the force argument useful to route interrupts to not yet online cpus without checking the target cpu against the cpu online mask. The following commit ffde1de6 ("irqchip: gic: Support forced affinity setting") implemented this for the GIC interrupt controller. As a consequence the ARM cpu offline irq migration fails if CPU0 is offlined, because CPU0 is still set in the affinity mask and the validataion against cpu online mask is skipped to the force argument being true. The following first_cpu(mask) selection always selects CPU0 as the target. Solve the issue by calling irq_set_affinity() with force=false from the CPU offline irq migration code so the GIC driver validates the affinity mask against CPU online mask and therefore removes CPU0 from the possible target candidates. Tested on TC2 hotpluging CPU0 in and out. Without this patch the system locks up as the IRQs are not migrated away from CPU0. Signed-off-by:
Sudeep Holla <sudeep.holla@arm.com> Acked-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Mark Rutland <mark.rutland@arm.com> Signed-off-by:
-
Mark Rutland authored
commit 85868313 upstream. The ARMv6 and ARMv7 early abort handlers clear the exclusive monitors upon entry to the kernel, but this is redundant: - We clear the monitors on every exception return since commit 200b812d ("Clear the exclusive monitor when returning from an exception"), so this is not necessary to ensure the monitors are cleared before returning from a fault handler. - Any dummy STREX will target a temporary scratch area in memory, and may succeed or fail without corrupting useful data. Its status value will not be used. - Any other STREX in the kernel must be preceded by an LDREX, which will initialise the monitors consistently and will not depend on the earlier state of the monitors. Therefore we have no reason to care about the initial state of the exclusive monitors when a data abort is taken, and clearing the monitors prior to exception return (as we already do) is sufficient. This patch removes the redundant clearing of the exclusive monitors from the early abort handlers. Signed-off-by:
-
Trond Myklebust authored
commit cd9288ff upstream. James Drew reports another bug whereby the NFS client is now sending an OPEN_DOWNGRADE in a situation where it should really have sent a CLOSE: the client is opening the file for O_RDWR, but then trying to do a downgrade to O_RDONLY, which is not allowed by the NFSv4 spec. Reported-by:
James Drews <drews@engr.wisc.edu> Link: http://lkml.kernel.org/r/541AD7E5.8020409@engr.wisc.edu Fixes: aee7af35 (NFSv4: Fix problems with close in the presence...) Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
-
Steve Dickson authored
commit 080af20c upstream. There is a race between nfs4_state_manager() and nfs_server_remove_lists() that happens during a nfsv3 mount. The v3 mount notices there is already a supper block so nfs_server_remove_lists() called which uses the nfs_client_lock spin lock to synchronize access to the client list. At the same time nfs4_state_manager() is running through the client list looking for work to do, using the same lock. When nfs4_state_manager() wins the race to the list, a v3 client pointer is found and not ignored properly which causes the panic. Moving some protocol checks before the state checking avoids the panic. Signed-off-by:
Steve Dickson <steved@redhat.com> Signed-off-by:
-
Shen Guang authored
commit 08d1dec6 upstream. When we are doing compliance test with xHCI, we found that if we enable CONFIG_USB_SUSPEND and plug in a bad device which causes over-current condition to the root port, software will not be noticed. The reason is that current code don't set hub->change_bits in hub_activate() when over-current happens, and then hub_events() will not check the port status because it thinks nothing changed. If CONFIG_USB_SUSPEND is disabled, the interrupt pipe of the hub will report the change and set hub->event_bits, and then hub_events() will check what events happened.In this case over-current can be detected. Signed-off-by:
Shen Guang <shenguang10@gmail.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Acked-by:
Sarah Sharp <sarah.a.sharp@linux.intel.com> Cc: Frans Klaver <fransklaver@gmail.com> Signed-off-by:
-
Felipe Balbi authored
commit 81a60b7f upstream. we don't to gate clocks until our children are done with their remove path. Fixes: af310e96 (usb: dwc3: omap: use runtime API's to enable clocks) Signed-off-by:
Felipe Balbi <balbi@ti.com> Signed-off-by:
-
Alan Stern authored
commit 7312b5dd upstream. Old code in ehci-hcd tries to expedite disabling endpoints after the controller has stopped, by destroying the endpoint's associated QH without first unlinking the QH. This was necessary back when the driver wasn't so careful about keeping track of the controller's state. But now we are careful about it, and the driver knows that when the controller isn't running, no unlinking delay is needed. Furthermore, skipping the unlink step will trigger a BUG() in qh_destroy() when the preceding QH is released, because the link pointer will be non-NULL. Removing the lines that skip the unlinking step and go directly to QH_STATE_IDLE fixes the problem. Signed-off-by:
Joe Lawrence <joe.lawrence@stratus.com> Tested-by:
-
Mark authored
commit c80b4495 upstream. This patch adds quirks for Entrega Technologies (later Xircom PortGear) USB- SCSI converters. They use Shuttle Technology EUSB-01/EUSB-S1 chips. The US_FL_SCM_MULT_TARG quirk is needed to allow multiple devices on the SCSI chain to be accessed. Without it only the (single) device with SCSI ID 0 can be used. The standalone converter sold by Entrega had model number U1-SC25. Xircom acquired Entrega and re-branded the product line PortGear. The PortGear USB to SCSI Converter (model PGSCSI) is internally identical to the Entrega product, but later models may use a different USB ID. The Entrega-branded units have USB ID 1645:0007, as does my Xircom PGSCSI, but the Windows and Macintosh drivers also support 085A:0028. Entrega also sold the "Mac USB Dock", which provides two USB ports, a Mac (8-pin mini-DIN) serial port and a SCSI port. It appears to the computer as a four-port hub, USB-serial, and USB-SCSI converters. The USB-SCSI part may have initially used the same ID as the standalone U1-SC25 (1645:0007), but later production used 085A:0026. My Xircom PortGear PGSCSI has bcdDevice=0x0100. Units with bcdDevice=0x0133 probably also exist. This patch adds quirks for 1645:0007, 085A:0026 and 085A:0028. The Windows driver INF file also mentions 085A:0032 "PortStation SCSI Module", but I couldn't find any mention of that actually existing in the wild; perhaps it was cancelled before release? Signed-off-by:
Mark Knibbs <markk@clara.co.uk> Signed-off-by:
-
Mark authored
commit b6a3ed67 upstream. Hi, The Ariston Technologies iConnect 025 and iConnect 050 (also known as e.g. iSCSI-50) are SCSI-USB converters which use Shuttle Technology/SCM Microsystems chips. Only the connectors differ; both have the same USB ID. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have one of these, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the products use. Signed-off-by:
-
Mark authored
commit 67d365a5 upstream. The Adaptec USBConnect 2000 is another SCSI-USB converter which uses Shuttle Technology/SCM Microsystems chips. The US_FL_SCM_MULT_TARG quirk is required to use SCSI devices with ID other than 0. I don't have a USBConnect 2000, but based on the other entries for Shuttle/ SCM-based converters this patch is very likely correct. I used 0x0000 and 0x9999 for bcdDeviceMin and bcdDeviceMax because I'm not sure which bcdDevice value the product uses. Signed-off-by:
-
Mark authored
commit c66f1c62 upstream. The Iomega Jaz USB Adapter is a SCSI-USB converter cable. The hardware seems to be identical to e.g. the Microtech XpressSCSI, using a Shuttle/ SCM chip set. However its firmware restricts it to only work with Jaz drives. On connecting the cable a message like this appears four times in the log: reset full speed USB device number 4 using uhci_hcd That's non-fatal but the US_FL_SINGLE_LUN quirk fixes it. Signed-off-by:
-
Joe Lawrence authored
commit c605f3cd upstream. During surprise device hotplug removal tests, it was observed that hub_events may try to call usb_lock_device on a device that has already been freed. Protect the usb_device by taking out a reference (under the hub_event_lock) when hub_events pulls it off the list, returning the reference after hub_events is finished using it. Signed-off-by:
-
Mathias Nyman authored
commit 96044694 upstream. Resuming from hibernate (S4) will restart and re-initialize xHC. The device contexts are freed and will be re-allocated later during device reset. Usb core will disable link pm in device resume before device reset, which will try to change the max exit latency, accessing the device contexts before they are re-allocated. There is no need to zero (disable) the max exit latency when disabling hw lpm for a freshly re-initialized xHC. So check that device context exists before doing anything. The max exit latency will be set again after device reset when usb core enables the link pm. Reported-by:
Imre Deak <imre.deak@intel.com> Tested-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
-
Mathias Nyman authored
commit c207e7c5 upstream. If xhci initialization fails before the roothub bandwidth domains (xhci->rh_bw[i]) are allocated it will oops when trying to access rh_bw members in xhci_mem_cleanup(). Reported-by:
Manuel Reimer <manuel.reimer@gmx.de> Signed-off-by:
-
Johan Hovold authored
commit 30966910 upstream. Add back some PIDs that were mistakingly remove when reverting commit 73228a05 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"), which apparently did more than its commit message claimed in that it not only moved some PIDs from option to zte_ev but also added some new ones. Fixes: 63a901c0 ("Revert "USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"") Reported-by:
Lei Liu <lei35151@163.com> Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
Johan Hovold authored
commit ee444609 upstream. Add device id for NOVITUS Bono E thermal printer. Reported-by:
Emanuel Koczwara <poczta@emanuelkoczwara.pl> Signed-off-by:
-
Bjørn Mork authored
commit 5b3da692 upstream. This VID:PID is used for some Direct IP devices behaving identical to the already supported 0F3D:68AA devices. Reported-by:
Lars Melin <larsm17@gmail.com> Signed-off-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Bjørn Mork authored
commit 049255f5 upstream. Sierra Wireless Direct IP devices using the 68A3 product ID can be configured for modes including a CDC ECM class function. The known example uses interface numbers 12 and 13 for the ECM control and data interfaces respectively, consistent with CDC MBIM function interface numbering on other Sierra devices. It seems cleaner to restrict this driver to the ff/ff/ff vendor specific interfaces rather than increasing the already long interface number blacklist. This should be more future proof if Sierra adds more class functions using interface numbers not yet in the blacklist. Signed-off-by:
-
Johan Hovold authored
commit 754eb21c upstream. Remove dublicate Qualcom PID 0x3197 which is already handled by the moto-modem driver since commit 6986a978 ("USB: add new moto_modem driver for some Morotola phones"). Fixes: 799ee924 ("USB: serial: add zte_ev.c driver") Signed-off-by:
-
Johan Hovold authored
commit 95be5739 upstream. Remove dublicate Gobi PID 0x9008 which is already handled by the qcserial driver since commit f05932c0 ("USB: qcserial: Add extra device IDs"). Fixes: 799ee924 ("USB: serial: add zte_ev.c driver") Signed-off-by:
-
Johan Hovold authored
commit 63a901c0 upstream. This reverts commit 73228a05 ("USB: option,zte_ev: move most ZTE CDMA devices to zte_ev"). Move the IDs of the devices that were previously driven by the option driver back to that driver. As several users have reported, the zte_ev driver is causing random disconnects as well as reconnect failures. A closer analysis of the zte_ev setup code reveals that it consists of standard CDC requests (SET/GET_LINE_CODING and SET_CONTROL_LINE_STATE) but unfortunately fails to get some of those right. In particular, as reported by Liu Lei, it fails to lower DTR/RTS on close. It also appears that the control requests lack the interface argument. Note that the zte_ev driver is based on code (once) distributed by ZTE that still appears to originally have been reverse-engineered and bolted onto the generic driver. Since line control is already handled properly by the option driver, and the SET/GET_LINE_CODING requests appears to be redundant (amounts to a SET 9600 8N1), this is a first step in ultimately removing the redundant zte_ev driver. Note that AC2726 had already been moved back to option, and that some IDs were in the device table of both drivers prior to the commit being reverted. Reported-by:
Lei Liu <liu.lei78@zte.com.cn> Signed-off-by:
-
Brennan Ashton authored
commit d7730273 upstream. This VIA Telecom baseband processor is used is used by by u-blox in both the FW2770 and FW2760 products and may be used in others as well. This patch has been tested on both of these modem versions. Signed-off-by:
Brennan Ashton <bashton@brennanashton.com> Signed-off-by:
-
Johan Hovold authored
commit f0e4cba2 upstream. Do not log normal interrupt-urb shutdowns as errors. The option driver has always been logging any nonzero interrupt-urb status as an error, including when the urb is killed during normal operation. Commit 9096f1fb ("USB: usb_wwan: fix potential NULL-deref at resume") moved the interrupt urb submission from port probe and release to open and close, thus potentially increasing the number of these false-positive error messages dramatically. Reported-by:
Ed Butler <ressy66@ausics.net> Tested-by:
-
Johan Hovold authored
commit 5654699f upstream. Make sure to verify the number of ports requested by subdriver to avoid writing beyond the end of fixed-size array in interface data. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of ports requested by a subdriver (which could have been determined from device descriptors) did not exceed this limit. Signed-off-by:
-
Stephen Hemminger authored
commit 5b6b80ae upstream. I have a j5 create (JUA210) USB 2 video device and adding it device id to SIS USB video gets it to work. Signed-off-by:
Stephen Hemminger <stephen@networkplumber.org> Signed-off-by:
-
Johan Hovold authored
commit d979e9f9 upstream. Make sure to verify the maximum number of endpoints per type to avoid writing beyond the end of a stack-allocated array. The current usb-serial implementation is limited to eight ports per interface but failed to verify that the number of endpoints of a certain type reported by a device did not exceed this limit. Signed-off-by:
-
Greg KH authored
commit 91fcb1ce upstream. This adds a new device id to the pl2303 driver for the ZTEK device. Reported-by:
Mike Chu <Mike-Chu@prolific.com.tw> Signed-off-by:
-
Max Filippov authored
commit d1b6ba82 upstream. Remove restoring a6 on some return paths and instead modify and restore it in a single place, using symbolic name. Correctly restore a7 from PT_AREG7 in case of illegal a6 value. Signed-off-by:
Max Filippov <jcmvbkbc@gmail.com> Signed-off-by:
-
Max Filippov authored
commit 7128039f upstream. Current definition of TLBTEMP_BASE_2 is always 32K above the TLBTEMP_BASE_1, whereas fast_second_level_miss handler for the TLBTEMP region analyzes virtual address bit (PAGE_SHIFT + DCACHE_ALIAS_ORDER) to determine TLBTEMP region where the fault happened. The size of the TLBTEMP region is also checked incorrectly: not 64K, but twice data cache way size (whicht may as well be less than the instruction cache way size). Fix TLBTEMP_BASE_2 to be TLBTEMP_BASE_1 + data cache way size. Provide TLBTEMP_SIZE that is a greater of doubled data cache way size or the instruction cache way size, and use it to determine if the second level TLB miss occured in the TLBTEMP region. Practical occurence of page faults in the TLBTEMP area is extremely rare, this code can be tested by deletion of all w[di]tlb instructions in the tlbtemp_mapping region. Signed-off-by:
-
Max Filippov authored
commit 52247123 upstream. With SMP and a lot of debug options enabled task_struct::thread gets out of reach of s32i/l32i instructions with base pointing at task_struct, breaking build with the following messages: arch/xtensa/kernel/entry.S: Assembler messages: arch/xtensa/kernel/entry.S:1002: Error: operand 3 of 'l32i.n' has invalid value '1048' arch/xtensa/kernel/entry.S:1831: Error: operand 3 of 's32i.n' has invalid value '1040' arch/xtensa/kernel/entry.S:1832: Error: operand 3 of 's32i.n' has invalid value '1044' Change base to point to task_struct::thread in such cases. Don't use a10 in _switch_to to save/restore prev pointer as a2 is not clobbered. Signed-off-by:
-
Alan Douglas authored
commit 1ca49463 upstream. Virtual address is translated to the XCHAL_KSEG_CACHED region in the dma_free_coherent, but is checked to be in the 0...XCHAL_KSEG_SIZE range. Change check for end of the range from 'addr >= X' to 'addr > X - 1' to handle the case of X == 0. Replace 'if (C) BUG();' construct with 'BUG_ON(C);'. Signed-off-by:
Alan Douglas <adouglas@cadence.com> Signed-off-by:
-
