- 06 Jun, 2018 15 commits
-
-
Juergen Gross authored
Revert commit 944e0fc5 ("x86/amd: don't set X86_BUG_SYSRET_SS_ATTRS when running under Xen") as it is lacking a prerequisite patch and is making things worse. Signed-off-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Colin Ian King authored
commit d3b56c56 upstream. Pointer request is being assigned but never used, so remove it. Cleans up the clang warning: drivers/platform/chrome/cros_ec_lpc.c:68:2: warning: Value stored to 'request' is never read Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Benson Leung <bleung@chromium.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Colin Ian King authored
commit 271ef65b upstream. The pointer dma_dev_name is assigned but never read, it is redundant and can therefore be removed. Cleans up clang warning: sound/soc/intel/common/sst-firmware.c:288:3: warning: Value stored to 'dma_dev_name' is never read Signed-off-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Matthias Kaehlcke authored
commit fb239c12 upstream. In _rtl92c_get_txpower_writeval_by_regulatory() the variable writeVal is assigned to itself in an if ... else statement, apparently only to document that the branch condition is handled and that a previously read value should be returned unmodified. The self-assignment causes clang to raise the following warning: drivers/net/wireless/realtek/rtlwifi/rtl8192cu/rf.c:304:13: error: explicitly assigning value of variable of type 'u32' (aka 'unsigned int') to itself [-Werror,-Wself-assign] writeVal = writeVal; Delete the branch with the self-assignment. Signed-off-by:
Matthias Kaehlcke <mka@chromium.org> Acked-by:
Larry Finger <Larry.Finger@lwfinger.net> Reviewed-by:
Guenter Roeck <groeck@chromium.org> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Colin Ian King authored
commit 531beb06 upstream. sg_table is being initialized and is never read before it is updated again later on, hence making the initialization redundant. Remove the initialization. Detected by clang scan-build: "warning: Value stored to 'sg_table' during its initialization is never read" Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20170914230516.6056-1-colin.king@canonical.com Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Eric Biggers authored
commit 81459649 upstream. wiphy names were recently limited to 128 bytes by commit a7cfebcb ("cfg80211: limit wiphy names to 128 bytes"). As it turns out though, this isn't sufficient because dev_vprintk_emit() needs the syslog header string "SUBSYSTEM=ieee80211\0DEVICE=+ieee80211:$devname" to fit into 128 bytes. This triggered the "device/subsystem name too long" WARN when the device name was >= 90 bytes. As before, this was reproduced by syzbot by sending an HWSIM_CMD_NEW_RADIO command to the MAC80211_HWSIM generic netlink family. Fix it by further limiting wiphy names to 64 bytes. Reported-by: syzbot+e64565577af34b3768dc@syzkaller.appspotmail.com Fixes: a7cfebcb ("cfg80211: limit wiphy names to 128 bytes") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com> Signed-off-by:
-
Sachin Grover authored
commit efe3de79 upstream. Call trace: [<ffffff9203a8d7a8>] dump_backtrace+0x0/0x428 [<ffffff9203a8dbf8>] show_stack+0x28/0x38 [<ffffff920409bfb8>] dump_stack+0xd4/0x124 [<ffffff9203d187e8>] print_address_description+0x68/0x258 [<ffffff9203d18c00>] kasan_report.part.2+0x228/0x2f0 [<ffffff9203d1927c>] kasan_report+0x5c/0x70 [<ffffff9203d1776c>] check_memory_region+0x12c/0x1c0 [<ffffff9203d17cdc>] memcpy+0x34/0x68 [<ffffff9203d75348>] xattr_getsecurity+0xe0/0x160 [<ffffff9203d75490>] vfs_getxattr+0xc8/0x120 [<ffffff9203d75d68>] getxattr+0x100/0x2c8 [<ffffff9203d76fb4>] SyS_fgetxattr+0x64/0xa0 [<ffffff9203a83f70>] el0_svc_naked+0x24/0x28 If user get root access and calls security.selinux setxattr() with an embedded NUL on a file and then if some process performs a getxattr() on that file with a length greater than the actual length of the string, it would result in a panic. To fix this, add the actual length of the string to the security context instead of the length passed by the userspace process. Signed-off-by:
Sachin Grover <sgrover@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by:
Paul Moore <paul@paul-moore.com> Signed-off-by:
-
Steven Rostedt (VMware) authored
commit 86b389ff upstream. If a instance has an event trigger enabled when it is freed, it could cause an access of free memory. Here's the case that crashes: # cd /sys/kernel/tracing # mkdir instances/foo # echo snapshot > instances/foo/events/initcall/initcall_start/trigger # rmdir instances/foo Would produce: general protection fault: 0000 [#1] PREEMPT SMP PTI Modules linked in: tun bridge ... CPU: 5 PID: 6203 Comm: rmdir Tainted: G W 4.17.0-rc4-test+ #933 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 RIP: 0010:clear_event_triggers+0x3b/0x70 RSP: 0018:ffffc90003783de0 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 6b6b6b6b6b6b6b2b RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff8800c7130ba0 RBP: ffffc90003783e00 R08: ffff8801131993f8 R09: 0000000100230016 R10: ffffc90003783d80 R11: 0000000000000000 R12: ffff8800c7130ba0 R13: ffff8800c7130bd8 R14: ffff8800cc093768 R15: 00000000ffffff9c FS: 00007f6f4aa86700(0000) GS:ffff88011eb40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f6f4a5aed60 CR3: 00000000cd552001 CR4: 00000000001606e0 Call Trace: event_trace_del_tracer+0x2a/0xc5 instance_rmdir+0x15c/0x200 tracefs_syscall_rmdir+0x52/0x90 vfs_rmdir+0xdb/0x160 do_rmdir+0x16d/0x1c0 __x64_sys_rmdir+0x17/0x20 do_syscall_64+0x55/0x1a0 entry_SYSCALL_64_after_hwframe+0x49/0xbe This was due to the call the clears out the triggers when an instance is being deleted not removing the trigger from the link list. Cc: stable@vger.kernel.org Fixes: 85f2b082 ("tracing: Add basic event trigger framework") Signed-off-by:
Steven Rostedt (VMware) <rostedt@goodmis.org> Signed-off-by:
-
Benjamin Tissoires authored
commit 40f7090b upstream. New ICs (like the one on the Lenovo T480s) answer to ETP_SMBUS_IAP_VERSION_CMD 4 bytes instead of 3. This corrupts the stack as i2c_smbus_read_block_data() uses the values returned by the i2c device to know how many data it need to return. i2c_smbus_read_block_data() can read up to 32 bytes (I2C_SMBUS_BLOCK_MAX) and there is no safeguard on how many bytes are provided in the return value. Ensure we always have enough space for any future firmware. Also 0-initialize the values to prevent any access to uninitialized memory. Cc: <stable@vger.kernel.org> # v4.4.x, v4.9.x, v4.14.x, v4.15.x, v4.16.x Signed-off-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Acked-by:
KT Liao <kt.liao@emc.com.tw> Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Mimi Zohar authored
commit f5acb3dc upstream. Userspace applications have been modified to write security xattrs, but they are not context aware. In the case of security.ima, the security xattr can be either a file hash or a file signature. Permitting writing one, but not the other requires the application to be context aware. In addition, userspace applications might write files to a staging area, which might not be in policy, and then change some file metadata (eg. owner) making it in policy. As a result, these files are not labeled properly. This reverts commit c68ed80c, which prevents writing file hashes as security.ima xattrs. Requested-by:
Patrick Ohly <patrick.ohly@intel.com> Cc: Dmitry Kasatkin <dmitry.kasatkin@gmail.com> Signed-off-by:
Mimi Zohar <zohar@linux.vnet.ibm.com> Cc: Mike Rapoport <rppt@linux.vnet.ibm.com> Signed-off-by:
-
Brian Foster authored
commit a27ba260 upstream. The struct xfs_agfl v5 header was originally introduced with unexpected padding that caused the AGFL to operate with one less slot than intended. The header has since been packed, but the fix left an incompatibility for users who upgrade from an old kernel with the unpacked header to a newer kernel with the packed header while the AGFL happens to wrap around the end. The newer kernel recognizes one extra slot at the physical end of the AGFL that the previous kernel did not. The new kernel will eventually attempt to allocate a block from that slot, which contains invalid data, and cause a crash. This condition can be detected by comparing the active range of the AGFL to the count. While this detects a padding mismatch, it can also trigger false positives for unrelated flcount corruption. Since we cannot distinguish a size mismatch due to padding from unrelated corruption, we can't trust the AGFL enough to simply repopulate the empty slot. Instead, avoid unnecessarily complex detection logic and and use a solution that can handle any form of flcount corruption that slips through read verifiers: distrust the entire AGFL and reset it to an empty state. Any valid blocks within the AGFL are intentionally leaked. This requires xfs_repair to rectify (which was already necessary based on the state the AGFL was found in). The reset mitigates the side effect of the padding mismatch problem from a filesystem crash to a free space accounting inconsistency. The generic approach also means that this patch can be safely backported to kernels with or without a packed struct xfs_agfl. Check the AGF for an invalid freelist count on initial read from disk. If detected, set a flag on the xfs_perag to indicate that a reset is required before the AGFL can be used. In the first transaction that attempts to use a flagged AGFL, reset it to empty, warn the user about the inconsistency and allow the freelist fixup code to repopulate the AGFL with new blocks. The xfs_perag flag is cleared to eliminate the need for repeated checks on each block allocation operation. This allows kernels that include the packing fix commit 96f859d5 ("libxfs: pack the agfl header structure so XFS_AGFL_SIZE is correct") to handle older unpacked AGFL formats without a filesystem crash. Suggested-by:
Dave Chinner <david@fromorbit.com> Signed-off-by:
Brian Foster <bfoster@redhat.com> Reviewed-by:
Darrick J. Wong <darrick.wong@oracle.com> Reviewed-by Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by:
Dave Chiluk <chiluk+linuxxfs@indeed.com> Signed-off-by:
-
Greg Kroah-Hartman authored
This reverts commit 0bd77073 which is commit a7aa75a2 upstream. There's been too many complaints about this. Personally I think it's going to blow up when people hit this in mainline, but hey, it's not my systems. At least we don't have to backport the mess to the stable kernels to give them some more life to live unscathed :) Reported-by:
Timur Tabi <timur@codeaurora.org> Reported-by:
Sebastian Gottschall <s.gottschall@dd-wrt.com> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Geert Uytterhoeven authored
commit 009615ab upstream. On sparc32, tcflag_t is unsigned long, unlike all other architectures: drivers/usb/serial/cp210x.c: In function 'cp210x_get_termios': drivers/usb/serial/cp210x.c:717:3: warning: passing argument 2 of 'cp210x_get_termios_port' from incompatible pointer type cp210x_get_termios_port(tty->driver_data, ^ drivers/usb/serial/cp210x.c:35:13: note: expected 'unsigned int *' but argument is of type 'tcflag_t *' static void cp210x_get_termios_port(struct usb_serial_port *port, ^ Consistently use tcflag_t to fix this. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Johan Hovold <johan@kernel.org> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Michael Neuling authored
commit faf37c44 upstream. Clear the PCR (Processor Compatibility Register) on boot to ensure we are not running in a compatibility mode. We've seen this cause problems when a crash (and kdump) occurs while running compat mode guests. The kdump kernel then runs with the PCR set and causes problems. The symptom in the kdump kernel (also seen in petitboot after fast-reboot) is early userspace programs taking sigills on newer instructions (seen in libc). Signed-off-by:
Michael Neuling <mikey@neuling.org> Cc: stable@vger.kernel.org Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
-
Will Deacon authored
commit 32c3fa7c upstream. For LSE atomics that read and write a register operand, we need to ensure that these operands are annotated as "early clobber" if the register is written before all of the input operands have been consumed. Failure to do so can result in the compiler allocating the same register to both operands, leading to splats such as: Unable to handle kernel paging request at virtual address 11111122222221 [...] x1 : 1111111122222222 x0 : 1111111122222221 Process swapper/0 (pid: 1, stack limit = 0x000000008209f908) Call trace: test_atomic64+0x1360/0x155c where x0 has been allocated as both the value to be stored and also the atomic_t pointer. This patch adds the missing clobbers. Cc: <stable@vger.kernel.org> Cc: Dave Martin <dave.martin@arm.com> Cc: Robin Murphy <robin.murphy@arm.com> Reported-by:
Mark Salter <msalter@redhat.com> Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
-
- 05 Jun, 2018 25 commits
-
-
Greg Kroah-Hartman authored
-
Josh Poimboeuf authored
commit 4e4636cf upstream. Guenter Roeck reported a boot failure in mips64. It was bisected to the following commit: d1091c7f ("objtool: Improve detection of BUG() and other dead ends") The unreachable() macro was formerly only composed of a single statement. The above commit added a second statement, but neglected to enclose the statements in a block. Suggested-by:
Guenter Roeck <linux@roeck-us.net> Reported-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Fixes: d1091c7f ("objtool: Improve detection of BUG() and other dead ends") Link: http://lkml.kernel.org/r/20170228042116.glmwmwiohcix7o4a@trebleSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Greg Kroah-Hartman authored
Not needed in mainline as this function got rewritten in 4.12 This enables objtool to grok the iret in the middle of a C function. This matches commit 76846bf3 ("x86/asm: Add unwind hint annotations to sync_core()") Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Greg Kroah-Hartman authored
When building tools/objtool/ it rightly complains about a number of files being out of sync. Fix this up by syncing them properly with the relevant in-kernel versions. Signed-off-by: -
Greg Kroah-Hartman authored
When building tools/perf/ it rightly complains about a number of .h files being out of sync. Fix this up by syncing them properly with the relevant in-kernel versions. Signed-off-by: -
Josh Poimboeuf authored
commit c207aee4 upstream. In preparation for an objtool rewrite which will have broader checks, whitelist functions and files which cause problems because they do unusual things with the stack. These whitelists serve as a TODO list for which functions and files don't yet have undwarf unwinder coverage. Eventually most of the whitelists can be removed in favor of manual CFI hint annotations or objtool improvements. Signed-off-by:
-
Josh Poimboeuf authored
commit 0afd0d9e upstream. Objtool has some crude logic for detecting static "noreturn" functions (aka "dead ends"). This is necessary for being able to correctly follow GCC code flow when such functions are called. It's remotely possible for two functions to call each other via sibling calls. If they don't have RET instructions, objtool's noreturn detection logic goes into a recursive loop: drivers/char/ipmi/ipmi_ssif.o: warning: objtool: return_hosed_msg()+0x0: infinite recursion (objtool bug!) drivers/char/ipmi/ipmi_ssif.o: warning: objtool: deliver_recv_msg()+0x0: infinite recursion (objtool bug!) Instead of reporting an error in this case, consider the functions to be non-dead-ends. Reported-and-tested-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Greg KH <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: damian <damian.tometzki@icloud.com> Link: http://lkml.kernel.org/r/7cc156408c5781a1f62085d352ced1fe39fe2f91.1525923412.git.jpoimboe@redhat.comSigned-off-by:
-
Josh Poimboeuf authored
commit 7dec80cc upstream. With the following commit: fd35c88b ("objtool: Support GCC 8 switch tables") I added a "can't find switch jump table" warning, to stop covering up silent failures if add_switch_table() can't find anything. That warning found yet another bug in the objtool switch table detection logic. For cases 1 and 2 (as described in the comments of find_switch_table()), the find_symbol_containing() check doesn't adjust the offset for RIP-relative switch jumps. Incidentally, this bug was already fixed for case 3 with: 6f5ec299 ("objtool: Detect RIP-relative switch table references") However, that commit missed the fix for cases 1 and 2. The different cases are now starting to look more and more alike. So fix the bug by consolidating them into a single case, by checking the original dynamic jump instruction in the case 3 loop. This also simplifies the code and makes it more robust against future switch table detection issues -- of which I'm sure there will be many... Switch table detection has been the most fragile area of objtool, by far. I long for the day when we'll have a GCC plugin for annotating switch tables. Linus asked me to delay such a plugin due to the flakiness of the plugin infrastructure in older versions of GCC, so this rickety code is what we're stuck with for now. At least the code is now a little simpler than it was. Reported-by:
kbuild test robot <lkp@intel.com> Signed-off-by:
-
Josh Poimboeuf authored
commit 6f5ec299 upstream. Typically a switch table can be found by detecting a .rodata access followed an indirect jump: 1969: 4a 8b 0c e5 00 00 00 mov 0x0(,%r12,8),%rcx 1970: 00 196d: R_X86_64_32S .rodata+0x438 1971: e9 00 00 00 00 jmpq 1976 <dispc_runtime_suspend+0xb6a> 1972: R_X86_64_PC32 __x86_indirect_thunk_rcx-0x4 Randy Dunlap reported a case (seen with GCC 4.8) where the .rodata access uses RIP-relative addressing: 19bd: 48 8b 3d 00 00 00 00 mov 0x0(%rip),%rdi # 19c4 <dispc_runtime_suspend+0xbb8> 19c0: R_X86_64_PC32 .rodata+0x45c 19c4: e9 00 00 00 00 jmpq 19c9 <dispc_runtime_suspend+0xbbd> 19c5: R_X86_64_PC32 __x86_indirect_thunk_rdi-0x4 In this case the relocation addend needs to be adjusted accordingly in order to find the location of the switch table. The fix is for case 3 (as described in the comments), but also make the existing case 1 & 2 checks more precise by only adjusting the addend for R_X86_64_PC32 relocations. This fixes the following warnings: drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_suspend()+0xbb8: sibling call from callable instruction with modified stack frame drivers/video/fbdev/omap2/omapfb/dss/dispc.o: warning: objtool: dispc_runtime_resume()+0xcc5: sibling call from callable instruction with modified stack frame Reported-by:
-
Josh Poimboeuf authored
commit fd35c88b upstream. With GCC 8, some issues were found with the objtool switch table detection. 1) In the .rodata section, immediately after the switch table, there can be another object which contains a pointer to the function which had the switch statement. In this case objtool wrongly considers the function pointer to be part of the switch table. Fix it by: a) making sure there are no pointers to the beginning of the function; and b) making sure there are no gaps in the switch table. Only the former was needed, the latter adds additional protection for future optimizations. 2) In find_switch_table(), case 1 and case 2 are missing the check to ensure that the .rodata switch table data is anonymous, i.e. that it isn't already associated with an ELF symbol. Fix it by adding the same find_symbol_containing() check which is used for case 3. This fixes the following warnings with GCC 8: drivers/block/virtio_blk.o: warning: objtool: virtio_queue_rq()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+72 net/ipv6/icmp.o: warning: objtool: icmpv6_rcv()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 drivers/usb/core/quirks.o: warning: objtool: quirks_param_set()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+48 drivers/mtd/nand/raw/nand_hynix.o: warning: objtool: hynix_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+24 drivers/mtd/nand/raw/nand_samsung.o: warning: objtool: samsung_nand_decode_id()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+32 drivers/gpu/drm/nouveau/nvkm/subdev/top/gk104.o: warning: objtool: gk104_top_oneinit()+0x0: stack state mismatch: cfa1=7+8 cfa2=7+64 Reported-by:
Arnd Bergmann <arnd@arndb.de> Reported-by:
-
Josh Poimboeuf authored
commit 13810435 upstream. GCC 8 moves a lot of unlikely code out of line to "cold" subfunctions in .text.unlikely. Properly detect the new subfunctions and treat them as extensions of the original functions. This fixes a bunch of warnings like: kernel/cgroup/cgroup.o: warning: objtool: parse_cgroup_root_flags()+0x33: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_addrm_files()+0x290: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: cgroup_apply_control_enable()+0x25b: sibling call from callable instruction with modified stack frame kernel/cgroup/cgroup.o: warning: objtool: rebind_subsystems()+0x325: sibling call from callable instruction with modified stack frame Reported-and-tested-by:
damian <damian.tometzki@icloud.com> Reported-by:
-
Greg Kroah-Hartman authored
There are pros and cons of dealing with tools in the kernel directory. The pros are the fact that development happens fast, and new features can be added to the kernel and the tools at the same times. The cons are when dealing with backported kernel patches, it can be necessary to backport parts of the tool changes as well. For 4.9.y so far, we have backported individual patches. That quickly breaks down when there are minor differences between how backports were handled, so grabbing 40+ patch long series can be difficult, not impossible, but really frustrating to attempt. To help mitigate this mess, here's a single big patch to sync up the objtool logic to the 4.14.47 version of the tool. From this point forward (after some other minor header file patches are applied), the tool should be in sync and much easier to maintain over time. This has survivied my limited testing, and as the codebase is identical to 4.14.47, I'm pretty comfortable dropping this big change in here in 4.9.y. Hopefully all goes well... Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: -
Arnaldo Carvalho de Melo authored
commit a12a4e02 upstream. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-7wj865zidu5ylf87i6i7v6z7@git.kernel.orgSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 68289cbd upstream. As tools/include/linux/kernel.h has it now, with the goodies present in the kernel.h counterpart, i.e. checking that the parameter is an array at build time. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-v0b41ivu6z6dyugbq9ffa9ez@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit 8607c1ee upstream. To match the kernel, then look for places redefining it to make it use this version, which checks that its parameter is an array at build time. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-txlcf1im83bcbj6kh0wxmyy8@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit f6441aff upstream. Will be used to adopt the more stringent version of ARRAY_SIZE(), the one in the kernel sources. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-d85dpvay1hoqscpezlntyd8x@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit 379d61b1 upstream. With just what we will need in the upcoming changesets, the BUILD_BUG_ON_ZERO() definition. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-lw8zg7x6ttwcvqhp90mwe3vo@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit 67ef2879 upstream. We will need it to build tools/perf/trace/beauty/statx.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-nin41ve2fa63lrfbdr6x57yr@git.kernel.orgSigned-off-by:
-
Jiri Olsa authored
commit aeafd623 upstream. To make it nicer and easily maintainable. Also moving the check into fixdep sub make, so its output is not scattered around the build output. Removing extra $$ from mman*.h checks. Signed-off-by:
Jiri Olsa <jolsa@kernel.org> Tested-by:
-
Jiri Olsa authored
commit abb26210 upstream. The fixdep tool needs to be built before everything else, because it fixes every object dependency file. We handle this currently by making all objects to depend on fixdep, which is error prone and is easily forgotten when new object is added. Instead of this, this patch force fixdep tool to be built as the first target in the separate make session. This way we don't need to handle extra fixdep dependencies and we are certain there's no fixdep race with any parallel make job. Committer notes: Testing it: Before: $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] GEN /tmp/build/perf/common-cmds.h HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep MKDIR /tmp/build/perf/pmu-events/ HOSTCC /tmp/build/perf/pmu-events/json.o MKDIR /tmp/build/perf/pmu-events/ HOSTCC /tmp/build/perf/pmu-events/jsmn.o HOSTCC /tmp/build/perf/pmu-events/jevents.o HOSTLD /tmp/build/perf/pmu-events/jevents-in.o PERF_VERSION = 4.9.rc8.g868cd5 CC /tmp/build/perf/perf-read-vdso32 <SNIP> After: $ rm -rf /tmp/build/perf/ ; mkdir -p /tmp/build/perf ; make -k O=/tmp/build/perf -C tools/perf install-bin make: Entering directory '/home/acme/git/linux/tools/perf' BUILD: Doing 'make -j4' parallel build HOSTCC /tmp/build/perf/fixdep.o HOSTLD /tmp/build/perf/fixdep-in.o LINK /tmp/build/perf/fixdep Auto-detecting system features: ... dwarf: [ on ] ... dwarf_getlocations: [ on ] ... glibc: [ on ] ... gtk2: [ on ] ... libaudit: [ on ] ... libbfd: [ on ] ... libelf: [ on ] ... libnuma: [ on ] ... numa_num_possible_cpus: [ on ] ... libperl: [ on ] ... libpython: [ on ] ... libslang: [ on ] ... libcrypto: [ on ] ... libunwind: [ on ] ... libdw-dwarf-unwind: [ on ] ... zlib: [ on ] ... lzma: [ on ] ... get_cpuid: [ on ] ... bpf: [ on ] GEN /tmp/build/perf/common-cmds.h MKDIR /tmp/build/perf/fd/ CC /tmp/build/perf/fd/array.o LD /tmp/build/perf/fd/libapi-in.o MKDIR /tmp/build/perf/fs/ CC /tmp/build/perf/event-parse.o CC /tmp/build/perf/fs/fs.o PERF_VERSION = 4.9.rc8.g57a92f CC /tmp/build/perf/event-plugin.o MKDIR /tmp/build/perf/fs/ CC /tmp/build/perf/fs/tracing_path.o <SNIP> Signed-off-by:
-
Arnaldo Carvalho de Melo authored
commit 73a9bf95 upstream. To aid in catching bugs when using atomics as a reference count. This is a trimmed down version with just what is used by tools/ at this point. After this, the patches submitted by Elena for tools/ doing the conversion from atomic_ to recount_ methods can be applied and tested. To activate it, buint perf with: make DEBUG=1 -C tools/perf Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-dqtxsumns9ov0l9r5x398f19@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit eaa75b51 upstream. The kernel has it and some files we got from there would require us including the userland header for that, so add it conditionally. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-gmwyal7c9vzzttlyk6u59rzn@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit 2bcdeadb upstream. Will be used by refcnt.h Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-jszriruqfqpez1bkivwfj6qb@git.kernel.orgSigned-off-by:
-
Arnaldo Carvalho de Melo authored
commit 49006538 upstream. From the kernel, get the gcc one and provide the fallback so that we can continue build with other compilers, such as with clang. Will be used by tools/arch/x86/include/asm/cmpxchg.h. Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: David Ahern <dsahern@gmail.com> Cc: Elena Reshetova <elena.reshetova@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Wang Nan <wangnan0@huawei.com> Link: http://lkml.kernel.org/n/tip-pecgz6efai4a9euuk4rxuotr@git.kernel.orgSigned-off-by:
-
Matthew Wilcox authored
commit 12ea6539 upstream. Move the pieces we still need to tools/include and update a few implicit includes. Signed-off-by:
Matthew Wilcox <mawilcox@microsoft.com> [ Just take the tools/include/linux/* portions of this patch - gregkh] Signed-off-by:
-
