- 15 Jun, 2021 1 commit
-
-
Jakub Kicinski authored
Scaled PPM conversion to PPB may (on 64bit systems) result in a value larger than s32 can hold (freq/scaled_ppm is a long). This means the kernel will not correctly reject unreasonably high ->freq values (e.g. > 4294967295ppb, 281474976645 scaled PPM). The conversion is equivalent to a division by ~66 (65.536), so the value of ppb is always smaller than ppm, but not small enough to assume narrowing the type from long -> s32 is okay. Note that reasonable user space (e.g. ptp4l) will not use such high values, anyway, 4289046510ppb ~= 4.3x, so the fix is somewhat pedantic. Fixes: d39a7435 ("ptp: validate the requested frequency adjustment.") Fixes: d94ba80e ("ptp: Added a brand new class driver for ptp clocks.") Signed-off-by:
Jakub Kicinski <kuba@kernel.org> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- 14 Jun, 2021 12 commits
-
-
Subash Abhinov Kasiviswanathan authored
Update the function prototype of mhi_ndo_xmit to match ndo_start_xmit. This otherwise leads to run time failures when CFI is enabled in kernel. Fixes: 3ffec6a1 ("net: Add mhi-net driver") Signed-off-by:
Subash Abhinov Kasiviswanathan <subashab@codeaurora.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothDavid S. Miller authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - Fix crash on SMP when debug is enabled ==================== Signed-off-by: -
Luiz Augusto von Dentz authored
When receiving a new connection pchan->conn won't be initialized so the code cannot use bt_dev_dbg as the pointer to hci_dev won't be accessible. Fixes: 2e1614f7 ("Bluetooth: SMP: Convert BT_ERR/BT_DBG to bt_dev_err/bt_dev_dbg") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org>
-
Pavel Skripkin authored
Syzbot reported slab-out-of-bounds Read in qrtr_endpoint_post. The problem was in wrong _size_ type: if (len != ALIGN(size, 4) + hdrlen) goto err; If size from qrtr_hdr is 4294967293 (0xfffffffd), the result of ALIGN(size, 4) will be 0. In case of len == hdrlen and size == 4294967293 in header this check won't fail and skb_put_data(skb, data + hdrlen, size); will read out of bound from data, which is hdrlen allocated block. Fixes: 194ccc88 ("net: qrtr: Support decoding incoming v2 packets") Reported-and-tested-by: syzbot+1917d778024161609247@syzkaller.appspotmail.com Signed-off-by:
Pavel Skripkin <paskripkin@gmail.com> Reviewed-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by:
-
David Ahern authored
Oliver reported a use case where deleting a VRF device can hang waiting for the refcnt to drop to 0. The root cause is that the dst is allocated against the VRF device but cached on the loopback device. The use case (added to the selftests) has an implicit VRF crossing due to the ordering of the FIB rules (lookup local is before the l3mdev rule, but the problem occurs even if the FIB rules are re-ordered with local after l3mdev because the VRF table does not have a default route to terminate the lookup). The end result is is that the FIB lookup returns the loopback device as the nexthop, but the ingress device is in a VRF. The mismatch causes the dst alloc against the VRF device but then cached on the loopback. The fix is to bring the trick used for IPv6 (see ip6_rt_get_dev_rcu): pick the dst alloc device based the fib lookup result but with checks that the result has a nexthop device (e.g., not an unreachable or prohibit entry). Fixes: f5a0aab8 ("net: ipv4: dst for local input routes should use l3mdev if relevant") Reported-by:
Oliver Herms <oliver.peter.herms@gmail.com> Signed-off-by:
David Ahern <dsahern@kernel.org> Signed-off-by:
-
Pavel Skripkin authored
Syzbot reported memory leak in tty_init_dev(). The problem was in unputted tty in ldisc_open() static int ldisc_open(struct tty_struct *tty) { ... ser->tty = tty_kref_get(tty); ... result = register_netdevice(dev); if (result) { rtnl_unlock(); free_netdev(dev); return -ENODEV; } ... } Ser pointer is netdev private_data, so after free_netdev() this pointer goes away with unputted tty reference. So, fix it by adding tty_kref_put() before freeing netdev. Reported-and-tested-by: syzbot+f303e045423e617d2cad@syzkaller.appspotmail.com Signed-off-by: -
Rahul Lakkireddy authored
The TID returned during successful filter creation is relative to the region in which the filter is created. Using it directly always returns Hi Prio/Normal filter region's entry for the first couple of entries, even though the rule is actually inserted in Hash region. Fix by analyzing in which region the filter has been inserted and save the absolute TID to be used for lookup later. Fixes: db43b30c ("cxgb4: add ethtool n-tuple filter deletion") Signed-off-by:
Rahul Lakkireddy <rahul.lakkireddy@chelsio.com> Signed-off-by:
-
Christophe JAILLET authored
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: e87ad553 ("netxen: support pci error handlers") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Christophe JAILLET authored
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: 451724c8 ("qlcnic: aer support") Signed-off-by:
-
Jakub Kicinski authored
Outer nest for ETHTOOL_A_STRSET_STRINGSETS is not accounted for. This may result in ETHTOOL_MSG_STRSET_GET producing a warning like: calculated message payload length (684) not sufficient WARNING: CPU: 0 PID: 30967 at net/ethtool/netlink.c:369 ethnl_default_doit+0x87a/0xa20 and a splat. As usually with such warnings three conditions must be met for the warning to trigger: - there must be no skb size rounding up (e.g. reply_size of 684); - string set must be per-device (so that the header gets populated); - the device name must be at least 12 characters long. all in all with current user space it looks like reading priv flags is the only place this could potentially happen. Or with syzbot :) Reported-by: syzbot+59aa77b92d06cd5a54f2@syzkaller.appspotmail.com Fixes: 71921690 ("ethtool: provide string sets with STRSET_GET request") Signed-off-by: -
Alex Elder authored
The purpose of the loop using u64_stats_fetch_*_irq() is to ensure statistics on a given CPU are collected atomically. If one of the statistics values gets updated within the begin/retry window, the loop will run again. Currently the statistics totals are updated inside that window. This means that if the loop ever retries, the statistics for the CPU will be counted more than once. Fix this by taking a snapshot of a CPU's statistics inside the protected window, and then updating the counters with the snapshot values after exiting the loop. (Also add a newline at the end of this file...) Fixes: 192c4b5d ("net: qualcomm: rmnet: Add support for 64 bit stats") Signed-off-by:
Alex Elder <elder@linaro.org> Signed-off-by:
-
Tyson Moore authored
Commit b8392808 ("sch_cake: add RFC 8622 LE PHB support to CAKE diffserv handling") added the LE mark to the Bulk tin. Update the comments to reflect the change. Signed-off-by:
Tyson Moore <tyson@tyson.me> Acked-by:
Toke Høiland-Jørgensen <toke@toke.dk> Signed-off-by:
-
- 12 Jun, 2021 1 commit
-
-
Changbin Du authored
There is a panic in socket ioctl cmd SIOCGSKNS when NET_NS is not enabled. The reason is that nsfs tries to access ns->ops but the proc_ns_operations is not implemented in this case. [7.670023] Unable to handle kernel NULL pointer dereference at virtual address 00000010 [7.670268] pgd = 32b54000 [7.670544] [00000010] *pgd=00000000 [7.671861] Internal error: Oops: 5 [#1] SMP ARM [7.672315] Modules linked in: [7.672918] CPU: 0 PID: 1 Comm: systemd Not tainted 5.13.0-rc3-00375-g6799d4f2 #16 [7.673309] Hardware name: Generic DT based system [7.673642] PC is at nsfs_evict+0x24/0x30 [7.674486] LR is at clear_inode+0x20/0x9c The same to tun SIOCGSKNS command. To fix this problem, we make get_net_ns() return -EINVAL when NET_NS is disabled. Meanwhile move it to right place net/core/net_namespace.c. Signed-off-by:
Changbin Du <changbin.du@gmail.com> Fixes: c62cce2c ("net: add an ioctl to get a socket network namespace") Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Jakub Kicinski <kuba@kernel.org> Cc: David Laight <David.Laight@ACULAB.COM> Cc: Christian Brauner <christian.brauner@ubuntu.com> Suggested-by:
Christian Brauner <christian.brauner@ubuntu.com> Signed-off-by:
-
- 11 Jun, 2021 7 commits
-
-
Jisheng Zhang authored
The register starts from 0x800 is the 16th MAC address register rather than the first one. Fixes: cffb13f4 ("stmmac: extend mac addr reg and fix perfect filering") Signed-off-by:
Jisheng Zhang <Jisheng.Zhang@synaptics.com> Signed-off-by:
-
David S. Miller authored
Rahul Lakkireddy says: ==================== cxgb4: bug fixes for ethtool flash ops This series of patches add bug fixes in ethtool flash operations. Patch 1 fixes an endianness issue when writing boot image to flash after the device ID has been updated. Patch 2 fixes sleep in atomic when writing PHY firmware to flash. Patch 3 fixes issue with PHY firmware image not getting written to flash when chip is still running. -==================== Signed-off-by: -
Rahul Lakkireddy authored
When using firmware-assisted PHY firmware image write to flash, halt the chip before beginning the flash write operation to allow the running firmware to store the image persistently. Otherwise, the running firmware will only store the PHY image in local on-chip RAM, which will be lost after next reset. Fixes: 4ee339e1 ("cxgb4: add support to flash PHY image") Signed-off-by:
-
Rahul Lakkireddy authored
Before writing new PHY firmware to on-chip memory, driver queries firmware for current running PHY firmware version, which can result in sleep waiting for reply. So, move spinlock closer to the actual on-chip memory write operation, instead of taking it at the callers. Fixes: 5fff701c ("cxgb4: always sync access when flashing PHY firmware") Signed-off-by:
-
Rahul Lakkireddy authored
Boot images are copied to memory and updated with current underlying device ID before flashing them to adapter. Ensure the updated images are always flashed in Big Endian to allow the firmware to read the new images during boot properly. Fixes: 55088355 ("cxgb4: add support to flash boot image") Signed-off-by:
-
Christophe JAILLET authored
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call, as already done in the remove function. Fixes: ab69bde6 ("alx: add a simple AR816x/AR817x device driver") Signed-off-by:
-
Praneeth Bajjuri authored
Current logic is performing hard reset and causing the programmed registers to be wiped out. as per datasheet: https://www.ti.com/lit/ds/symlink/dp83867cr.pdf 8.6.26 Control Register (CTRL) do SW_RESTART to perform a reset not including the registers, If performed when link is already present, it will drop the link and trigger re-auto negotiation. Signed-off-by:
Praneeth Bajjuri <praneeth@ti.com> Signed-off-by:
Geet Modi <geet.modi@ti.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
-
- 10 Jun, 2021 19 commits
-
-
David S. Miller authored
Mat Martineau says: ==================== mptcp: More v5.13 fixes Here's another batch of MPTCP fixes for v5.13. Patch 1 cleans up memory accounting between the MPTCP-level socket and the subflows to more reliably transfer forward allocated memory under pressure. Patch 2 wakes up socket readers more reliably. Patch 3 changes a WARN_ONCE to a pr_debug. Patch 4 changes the selftests to only use syncookies in test cases where they do not cause spurious failures. Patch 5 modifies socket error reporting to avoid a possible soft lockup. ==================== Signed-off-by: -
Paolo Abeni authored
Maxim reported a soft lookup in subflow_error_report(): watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [swapper/0:0] RIP: 0010:native_queued_spin_lock_slowpath RSP: 0018:ffffa859c0003bc0 EFLAGS: 00000202 RAX: 0000000000000101 RBX: 0000000000000001 RCX: 0000000000000000 RDX: ffff9195c2772d88 RSI: 0000000000000000 RDI: ffff9195c2772d88 RBP: ffff9195c2772d00 R08: 00000000000067b0 R09: c6e31da9eb1e44f4 R10: ffff9195ef379700 R11: ffff9195edb50710 R12: ffff9195c2772d88 R13: ffff9195f500e3d0 R14: ffff9195ef379700 R15: ffff9195ef379700 FS: 0000000000000000(0000) GS:ffff91961f400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000c000407000 CR3: 0000000002988000 CR4: 00000000000006f0 Call Trace: <IRQ> _raw_spin_lock_bh subflow_error_report mptcp_subflow_data_available __mptcp_move_skbs_from_subflow mptcp_data_ready tcp_data_queue tcp_rcv_established tcp_v4_do_rcv tcp_v4_rcv ip_protocol_deliver_rcu ip_local_deliver_finish __netif_receive_skb_one_core netif_receive_skb rtl8139_poll 8139too __napi_poll net_rx_action __do_softirq __irq_exit_rcu common_interrupt </IRQ> The calling function - mptcp_subflow_data_available() - can be invoked from different contexts: - plain ssk socket lock - ssk socket lock + mptcp_data_lock - ssk socket lock + mptcp_data_lock + msk socket lock. Since subflow_error_report() tries to acquire the mptcp_data_lock, the latter two call chains will cause soft lookup. This change addresses the issue moving the error reporting call to outer functions, where the held locks list is known and the we can acquire only the needed one. Reported-by:
Maxim Galaganov <max@internet.ru> Fixes: 15cc1045 ("mptcp: deliver ssk errors to msk") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/199Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by:
-
Paolo Abeni authored
Syncookie validation may fail for OoO packets, causing spurious resets and self-tests failures, so let's force syncookie only for tests iteration with no OoO. Fixes: fed61c4b ("selftests: mptcp: make 2nd net namespace use tcp syn cookies unconditionally") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/198Signed-off-by:
-
Paolo Abeni authored
warn_bad_map() produces a kernel WARN on bad input coming from the network. Use pr_debug() to avoid spamming the system log. Additionally, when the right bound check fails, warn_bad_map() reports the wrong ssn value, let's fix it. Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/107Signed-off-by:
-
Paolo Abeni authored
Currently we rely on the subflow->data_avail field, which is subject to races: ssk1 skb len = 500 DSS(seq=1, len=1000, off=0) # data_avail == MPTCP_SUBFLOW_DATA_AVAIL ssk2 skb len = 500 DSS(seq = 501, len=1000) # data_avail == MPTCP_SUBFLOW_DATA_AVAIL ssk1 skb len = 500 DSS(seq = 1, len=1000, off =500) # still data_avail == MPTCP_SUBFLOW_DATA_AVAIL, # as the skb is covered by a pre-existing map, # which was in-sequence at reception time. Instead we can explicitly check if some has been received in-sequence, propagating the info from __mptcp_move_skbs_from_subflow(). Additionally add the 'ONCE' annotation to the 'data_avail' memory access, as msk will read it outside the subflow socket lock. Fixes: 648ef4b8 ("mptcp: Implement MPTCP receive path") Signed-off-by:
-
Paolo Abeni authored
If the host is under sever memory pressure, and RX forward memory allocation for the msk fails, we try to borrow the required memory from the ingress subflow. The current attempt is a bit flaky: if skb->truesize is less than SK_MEM_QUANTUM, the ssk will not release any memory, and the next schedule will fail again. Instead, directly move the required amount of pages from the ssk to the msk, if available Fixes: 9c3f94e1 ("mptcp: add missing memory scheduling in the rx path") Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfDavid S. Miller authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Fix a crash when stateful expression with its own gc callback is used in a set definition. 2) Skip IPv6 packets from any link-local address in IPv6 fib expression. Add a selftest for this scenario, from Florian Westphal. ==================== Signed-off-by: -
David S. Miller authored
Maxim Mikityanskiy says: ==================== Fix out of bounds when parsing TCP options This series fixes out-of-bounds access in various places in the kernel where parsing of TCP options takes place. Fortunately, many more occurrences don't have this bug. v2 changes: synproxy: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length. sch_cake: Added doff validation to avoid parsing garbage. ==================== Signed-off-by: -
Maxim Mikityanskiy authored
The TCP option parser in cake qdisc (cake_get_tcpopt and cake_tcph_may_drop) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added doff validation in cake_get_tcphdr to avoid parsing garbage as TCP header. Although it wasn't strictly an out-of-bounds access (memory was allocated), garbage values could be read where CAKE expected the TCP header if doff was smaller than 5. Cc: Young Xiao <92siuyang@gmail.com> Fixes: 8b713881 ("sch_cake: Add optional ACK filter") Signed-off-by:
Maxim Mikityanskiy <maximmi@nvidia.com> Acked-by:
-
Maxim Mikityanskiy authored
The TCP option parser in mptcp (mptcp_get_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). Cc: Young Xiao <92siuyang@gmail.com> Fixes: cec37a6e ("mptcp: Handle MP_CAPABLE options for outgoing connections") Signed-off-by:
-
Maxim Mikityanskiy authored
The TCP option parser in synproxy (synproxy_parse_options) could read one byte out of bounds. When the length is 1, the execution flow gets into the loop, reads one byte of the opcode, and if the opcode is neither TCPOPT_EOL nor TCPOPT_NOP, it reads one more byte, which exceeds the length of 1. This fix is inspired by commit 9609dad2 ("ipv4: tcp_input: fix stack out of bounds when parsing TCP options."). v2 changes: Added an early return when length < 0 to avoid calling skb_header_pointer with negative length. Cc: Young Xiao <92siuyang@gmail.com> Fixes: 48b1de4c ("netfilter: add SYNPROXY core/target") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
-
Eric Dumazet authored
There is a known race in packet_sendmsg(), addressed in commit 32d3182c ("net/packet: fix race in tpacket_snd()") Now we have data_race(), we can use it to avoid a future KCSAN warning, as syzbot loves stressing af_packet sockets :) Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Eric Dumazet authored
UDP sendmsg() path can be lockless, it is possible for another thread to re-connect an change sk->sk_txhash under us. There is no serious impact, but we can use READ_ONCE()/WRITE_ONCE() pair to document the race. BUG: KCSAN: data-race in __ip4_datagram_connect / skb_set_owner_w write to 0xffff88813397920c of 4 bytes by task 30997 on cpu 1: sk_set_txhash include/net/sock.h:1937 [inline] __ip4_datagram_connect+0x69e/0x710 net/ipv4/datagram.c:75 __ip6_datagram_connect+0x551/0x840 net/ipv6/datagram.c:189 ip6_datagram_connect+0x2a/0x40 net/ipv6/datagram.c:272 inet_dgram_connect+0xfd/0x180 net/ipv4/af_inet.c:580 __sys_connect_file net/socket.c:1837 [inline] __sys_connect+0x245/0x280 net/socket.c:1854 __do_sys_connect net/socket.c:1864 [inline] __se_sys_connect net/socket.c:1861 [inline] __x64_sys_connect+0x3d/0x50 net/socket.c:1861 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff88813397920c of 4 bytes by task 31039 on cpu 0: skb_set_hash_from_sk include/net/sock.h:2211 [inline] skb_set_owner_w+0x118/0x220 net/core/sock.c:2101 sock_alloc_send_pskb+0x452/0x4e0 net/core/sock.c:2359 sock_alloc_send_skb+0x2d/0x40 net/core/sock.c:2373 __ip6_append_data+0x1743/0x21a0 net/ipv6/ip6_output.c:1621 ip6_make_skb+0x258/0x420 net/ipv6/ip6_output.c:1983 udpv6_sendmsg+0x160a/0x16b0 net/ipv6/udp.c:1527 inet6_sendmsg+0x5f/0x80 net/ipv6/af_inet6.c:642 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 ___sys_sendmsg net/socket.c:2404 [inline] __sys_sendmmsg+0x315/0x4b0 net/socket.c:2490 __do_sys_sendmmsg net/socket.c:2519 [inline] __se_sys_sendmmsg net/socket.c:2516 [inline] __x64_sys_sendmmsg+0x53/0x60 net/socket.c:2516 do_syscall_64+0x4a/0x90 arch/x86/entry/common.c:47 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0xbca3c43d -> 0xfdb309e0 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 31039 Comm: syz-executor.2 Not tainted 5.13.0-rc3-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
syzbot <syzkaller@googlegroups.com> Signed-off-by:
-
Eric Dumazet authored
sock_error() is known to be racy. The code avoids an atomic operation is sk_err is zero, and this field could be changed under us, this is fine. Sysbot reported: BUG: KCSAN: data-race in sock_alloc_send_pskb / unix_release_sock write to 0xffff888131855630 of 4 bytes by task 9365 on cpu 1: unix_release_sock+0x2e9/0x6e0 net/unix/af_unix.c:550 unix_release+0x2f/0x50 net/unix/af_unix.c:859 __sock_release net/socket.c:599 [inline] sock_close+0x6c/0x150 net/socket.c:1258 __fput+0x25b/0x4e0 fs/file_table.c:280 ____fput+0x11/0x20 fs/file_table.c:313 task_work_run+0xae/0x130 kernel/task_work.c:164 tracehook_notify_resume include/linux/tracehook.h:189 [inline] exit_to_user_mode_loop kernel/entry/common.c:174 [inline] exit_to_user_mode_prepare+0x156/0x190 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:301 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57 entry_SYSCALL_64_after_hwframe+0x44/0xae read to 0xffff888131855630 of 4 bytes by task 9385 on cpu 0: sock_error include/net/sock.h:2269 [inline] sock_alloc_send_pskb+0xe4/0x4e0 net/core/sock.c:2336 unix_dgram_sendmsg+0x478/0x1610 net/unix/af_unix.c:1671 unix_seqpacket_sendmsg+0xc2/0x100 net/unix/af_unix.c:2055 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg net/socket.c:674 [inline] ____sys_sendmsg+0x360/0x4d0 net/socket.c:2350 __sys_sendmsg_sock+0x25/0x30 net/socket.c:2416 io_sendmsg fs/io_uring.c:4367 [inline] io_issue_sqe+0x231a/0x6750 fs/io_uring.c:6135 __io_queue_sqe+0xe9/0x360 fs/io_uring.c:6414 __io_req_task_submit fs/io_uring.c:2039 [inline] io_async_task_func+0x312/0x590 fs/io_uring.c:5074 __tctx_task_work fs/io_uring.c:1910 [inline] tctx_task_work+0x1d4/0x3d0 fs/io_uring.c:1924 task_work_run+0xae/0x130 kernel/task_work.c:164 tracehook_notify_signal include/linux/tracehook.h:212 [inline] handle_signal_work kernel/entry/common.c:145 [inline] exit_to_user_mode_loop kernel/entry/common.c:171 [inline] exit_to_user_mode_prepare+0xf8/0x190 kernel/entry/common.c:208 __syscall_exit_to_user_mode_work kernel/entry/common.c:290 [inline] syscall_exit_to_user_mode+0x20/0x40 kernel/entry/common.c:301 do_syscall_64+0x56/0x90 arch/x86/entry/common.c:57 entry_SYSCALL_64_after_hwframe+0x44/0xae value changed: 0x00000000 -> 0x00000068 Reported by Kernel Concurrency Sanitizer on: CPU: 0 PID: 9385 Comm: syz-executor.3 Not tainted 5.13.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Signed-off-by:
-
David S. Miller authored
Nikolay Aleksandrov says: ==================== net: bridge: vlan tunnel egress path fixes These two fixes take care of tunnel_dst problems in the vlan tunnel egress path. Patch 01 fixes a null ptr deref due to the lockless use of tunnel_dst pointer without checking it first, and patch 02 fixes a use-after-free issue due to wrong dst refcounting (dst_clone() -> dst_hold_safe()). Both fix the same commit and should be queued for stable backports: Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths") v2: no changes, added stable list to CC ==================== Signed-off-by:
-
Nikolay Aleksandrov authored
The egress tunnel code uses dst_clone() and directly sets the result which is wrong because the entry might have 0 refcnt or be already deleted, causing number of problems. It also triggers the WARN_ON() in dst_hold()[1] when a refcnt couldn't be taken. Fix it by using dst_hold_safe() and checking if a reference was actually taken before setting the dst. [1] dmesg WARN_ON log and following refcnt errors WARNING: CPU: 5 PID: 38 at include/net/dst.h:230 br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Modules linked in: 8021q garp mrp bridge stp llc bonding ipv6 virtio_net CPU: 5 PID: 38 Comm: ksoftirqd/5 Kdump: loaded Tainted: G W 5.13.0-rc3+ #360 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc33 04/01/2014 RIP: 0010:br_handle_egress_vlan_tunnel+0x10b/0x134 [bridge] Code: e8 85 bc 01 e1 45 84 f6 74 90 45 31 f6 85 db 48 c7 c7 a0 02 19 a0 41 0f 94 c6 31 c9 31 d2 44 89 f6 e8 64 bc 01 e1 85 db 75 02 <0f> 0b 31 c9 31 d2 44 89 f6 48 c7 c7 70 02 19 a0 e8 4b bc 01 e1 49 RSP: 0018:ffff8881003d39e8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffffffffa01902a0 RBP: ffff8881040c6700 R08: 0000000000000000 R09: 0000000000000001 R10: 2ce93d0054fe0d00 R11: 54fe0d00000e0000 R12: ffff888109515000 R13: 0000000000000000 R14: 0000000000000001 R15: 0000000000000401 FS: 0000000000000000(0000) GS:ffff88822bf40000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f42ba70f030 CR3: 0000000109926000 CR4: 00000000000006e0 Call Trace: br_handle_vlan+0xbc/0xca [bridge] __br_forward+0x23/0x164 [bridge] deliver_clone+0x41/0x48 [bridge] br_handle_frame_finish+0x36f/0x3aa [bridge] ? skb_dst+0x2e/0x38 [bridge] ? br_handle_ingress_vlan_tunnel+0x3e/0x1c8 [bridge] ? br_handle_frame_finish+0x3aa/0x3aa [bridge] br_handle_frame+0x2c3/0x377 [bridge] ? __skb_pull+0x33/0x51 ? vlan_do_receive+0x4f/0x36a ? br_handle_frame_finish+0x3aa/0x3aa [bridge] __netif_receive_skb_core+0x539/0x7c6 ? __list_del_entry_valid+0x16e/0x1c2 __netif_receive_skb_list_core+0x6d/0xd6 netif_receive_skb_list_internal+0x1d9/0x1fa gro_normal_list+0x22/0x3e dev_gro_receive+0x55b/0x600 ? detach_buf_split+0x58/0x140 napi_gro_receive+0x94/0x12e virtnet_poll+0x15d/0x315 [virtio_net] __napi_poll+0x2c/0x1c9 net_rx_action+0xe6/0x1fb __do_softirq+0x115/0x2d8 run_ksoftirqd+0x18/0x20 smpboot_thread_fn+0x183/0x19c ? smpboot_unregister_percpu_thread+0x66/0x66 kthread+0x10a/0x10f ? kthread_mod_delayed_work+0xb6/0xb6 ret_from_fork+0x22/0x30 ---[ end trace 49f61b07f775fd2b ]--- dst_release: dst:00000000c02d677a refcnt:-1 dst_release underflow Cc: stable@vger.kernel.org Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Signed-off-by:
Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by:
-
Nikolay Aleksandrov authored
This patch fixes a tunnel_dst null pointer dereference due to lockless access in the tunnel egress path. When deleting a vlan tunnel the tunnel_dst pointer is set to NULL without waiting a grace period (i.e. while it's still usable) and packets egressing are dereferencing it without checking. Use READ/WRITE_ONCE to annotate the lockless use of tunnel_id, use RCU for accessing tunnel_dst and make sure it is read only once and checked in the egress path. The dst is already properly RCU protected so we don't need to do anything fancy than to make sure tunnel_id and tunnel_dst are read only once and checked in the egress path. Cc: stable@vger.kernel.org Fixes: 11538d03 ("bridge: vlan dst_metadata hooks in ingress and egress paths") Signed-off-by:
-
Zheng Yongjun authored
Function 'ping_queue_rcv_skb' not always return success, which will also return fail. If not check the wrong return value of it, lead to function `ping_rcv` return success. Signed-off-by:
Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by:
-
Willem de Bruijn authored
msg_zerocopy signals if a send operation required copying with a flag in serr->ee.ee_code. This field can be incorrect as of the below commit, as a result of both structs uarg and serr pointing into the same skb->cb[]. uarg->zerocopy must be read before skb->cb[] is reinitialized to hold serr. Similar to other fields len, hi and lo, use a local variable to temporarily hold the value. This was not a problem before, when the value was passed as a function argument. Fixes: 75518851 ("skbuff: Push status and refcounts into sock_zerocopy_callback") Reported-by:
Talal Ahmad <talalahmad@google.com> Signed-off-by:
Willem de Bruijn <willemb@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Reviewed-by:
-
