- 24 Apr, 2008 40 commits
-
-
Mauro Carvalho Chehab authored
Also removes the dead restart_video_queue() function Signed-off-by:Mauro Carvalho Chehab <mchehab@infradead.org>
-
Mauro Carvalho Chehab authored
Signed-off-by: -
Aidan Thornton authored
It fixes a couple of minor bugs, comments out a bogus BUG_ON, sets fh->type correctly, uses dev->width and dev->height for now, and adds a missing spinlock init (nasty - caused a system lockup). It also adds some debug code which probably isn't all that useful. I haven't tested this version of the patch yet, though, so I'm not sure what you can expect if you try it. Signed-off-by:
Aidan Thornton <makosoft@googlemail.com> Signed-off-by:
-
Mauro Carvalho Chehab authored
The usage of videobuf-vmalloc allows to cleanup em28xx logic. Also, it reduced its size by about 5.42% on i386 arch (and about 7.5% on x86_64): 39113 4876 40 44029 abfd old/em28xx.ko 36731 4868 40 41639 a2a7 /home/v4l/master/v4l/em28xx.ko Also, the preliminary tests, made on a single core 1.5 MHz Centrino showed that CPU usage reduced from 42%-75% to 28%-33% (reports from "top") command. A test with time command presented an even better result: This is the performance tests I did, running code_example to get 1,000 frames @29.995 Hz (about 35 seconds of stream), tested on a i386 machine, running at 1,5GHz: The old driver: $ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example 0:34.21: 8.22s User time, 25.16s Kernel time, 97% CPU used The videobuf-based driver: $ time -f "%E: %Us User time, %Ss Kernel time, %P CPU used" ./capture_example 0:35.36: 0.01s User time, 0.05s Kernel time, 0% CPU used Conclusion: The time consumption to receive the stream where reduced from about 33.38 seconds to 0.05 seconds. Signed-off-by: -
Janne Grunau authored
The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by:
Janne Grunau <janne-dvb@grunau.be> Acked-by:
Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by:
Michael Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
If frontend is not attached, both cx88-dvb and saa7134-dvb don't register DVB. However, dvb unregister were inconditionally called. Due to that, an OOPS is generated. Signed-off-by: -
Hans Verkuil authored
Added the last remaining out-of-tree kernel driver from the ivtv project. The saa717x is used in several Japanese cards and a Russian card. The driver is not complete in that only NTSC is supported and no PAL/SECAM. Hopefully this will be added in the future. Signed-off-by:
Takahiro Adachi <tadachi@tadachi-net.com> Signed-off-by:
Kyuma Ohta <whatisthis@jcom.home.ne.jp> Signed-off-by:
Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by:
-
Hans Verkuil authored
Signed-off-by:
-
Oliver Endriss authored
Implement support for Fujitsu Siemens DVB-T Activy Budget, sub-system id 0x1131:0x5f61. Signed-off-by:
Oliver Endriss <o.endriss@gmx.de> Signed-off-by:
-
Christoph Pfister authored
Quoting the commit introducing reinitialise_demod (3984 / by adq): "These cards [KNC1 DVBT and DVBC] need special handling for CI - reinitialising the frontend device when the CI module is reset." Apparently my 1894:0010 also needs that fix, because once you initialise CI/CAM you lose lock. Signed-off-by:
Christoph Pfister <pfister@linuxtv.org> Signed-off-by:
-
Christoph Pfister authored
The current ci implementation doesn't accept 0xff when reading data bytes (address == 0), thus breaks cams which report a buffer size of 0x--ff like my orion one. Remove the 0xff check altogether, because validation is really the job of a higher layer. Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Matthias Schwarzott authored
Add support for composite and s-video inputs on Avermedia DVB-S Pro and DVB-S Hybrid+FM cards (both labled A700) to the saa7134 driver. XC2028 support for Hybrid+FM is still missing. Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Reviewed-by:
-
Dâniel Fraga authored
The attached patch adds complete remote control support for Powercolor Real Angel 330. Signed-off-by:
Daniel Fraga <fragabr@gmail.com> Signed-off-by:
-
Dâniel Fraga authored
The attached patch fixes gpio references for Powercolor Real Angel 330. Signed-off-by:
-
Thierry MERLE authored
__PRETTY_FUNCTION__ has no sense in C lang context. Rename it as __func__ Signed-off-by:
Thierry MERLE <thierry.merle@free.fr> Signed-off-by:
-
Harvey Harrison authored
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by:
-
Guennadi Liakhovetski authored
All drivers should provide a spinlock to be used in videobuf operations. Signed-off-by:
Guennadi Liakhovetski <g.liakhovetski@pengutronix.de> Reviewed-by:
Brandon Philips <bphilips@suse.de> Signed-off-by:
-
Guennadi Liakhovetski authored
Function pointers and the driver owner are not expected to change throughout soc-camera host's life. Extract them into an operations struct. Signed-off-by:
-
