- 11 Feb, 2020 15 commits
-
-
Cong Wang authored
[ Upstream commit 599be01e ] As Eric noticed, tcindex_alloc_perfect_hash() uses cp->hash to compute the size of memory allocation, but cp->hash is set again after the allocation, this caused an out-of-bound access. So we have to move all cp->hash initialization and computation before the memory allocation. Move cp->mask and cp->shift together as cp->hash may need them for computation too. Reported-and-tested-by: syzbot+35d4dea36c387813ed31@syzkaller.appspotmail.com Fixes: 331b7292 ("net: sched: RCU cls_tcindex") Cc: Eric Dumazet <eric.dumazet@gmail.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Jiri Pirko <jiri@resnulli.us> Cc: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit 2b5b8251 ] hsr_port_get_rcu() can return NULL, so we need to be careful. general protection fault, probably for non-canonical address 0xdffffc0000000006: 0000 [#1] PREEMPT SMP KASAN KASAN: null-ptr-deref in range [0x0000000000000030-0x0000000000000037] CPU: 1 PID: 10249 Comm: syz-executor.5 Not tainted 5.5.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__read_once_size include/linux/compiler.h:199 [inline] RIP: 0010:hsr_addr_is_self+0x86/0x330 net/hsr/hsr_framereg.c:44 Code: 04 00 f3 f3 f3 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 e8 6b ff 94 f9 4c 89 f2 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 75 02 00 00 48 8b 43 30 49 39 c6 49 89 47 c0 0f RSP: 0018:ffffc90000da8a90 EFLAGS: 00010206 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: ffffffff87e0cc33 RDX: 0000000000000006 RSI: ffffffff87e035d5 RDI: 0000000000000000 RBP: ffffc90000da8b20 R08: ffff88808e7de040 R09: ffffed1015d2707c R10: ffffed1015d2707b R11: ffff8880ae9383db R12: ffff8880a689bc5e R13: 1ffff920001b5153 R14: 0000000000000030 R15: ffffc90000da8af8 FS: 00007fd7a42be700(0000) GS:ffff8880ae900000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32338000 CR3: 00000000a928c000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <IRQ> hsr_handle_frame+0x1c5/0x630 net/hsr/hsr_slave.c:31 __netif_receive_skb_core+0xfbc/0x30b0 net/core/dev.c:5099 __netif_receive_skb_one_core+0xa8/0x1a0 net/core/dev.c:5196 __netif_receive_skb+0x2c/0x1d0 net/core/dev.c:5312 process_backlog+0x206/0x750 net/core/dev.c:6144 napi_poll net/core/dev.c:6582 [inline] net_rx_action+0x508/0x1120 net/core/dev.c:6650 __do_softirq+0x262/0x98c kernel/softirq.c:292 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1082 </IRQ> Fixes: c5a75911 ("net/hsr: Use list_head (and rcu) instead of array for slave devices.") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Ridge Kennedy authored
[ Upstream commit 0d0d9a38 ] In the past it was possible to create multiple L2TPv3 sessions with the same session id as long as the sessions belonged to different tunnels. The resulting sessions had issues when used with IP encapsulated tunnels, but worked fine with UDP encapsulated ones. Some applications began to rely on this behaviour to avoid having to negotiate unique session ids. Some time ago a change was made to require session ids to be unique across all tunnels, breaking the applications making use of this "feature". This change relaxes the duplicate session id check to allow duplicates if both of the colliding sessions belong to UDP encapsulated tunnels. Fixes: dbdbc73b ("l2tp: fix duplicate session creation") Signed-off-by: Ridge Kennedy <ridge.kennedy@alliedtelesis.co.nz> Acked-by: James Chapman <jchapman@katalix.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Taehee Yoo authored
[ Upstream commit bd5cd35b ] gtp hashtable size is received by user-space. So, this hashtable size could be too large. If so, kmalloc will internally print a warning message. This warning message is actually not necessary for the gtp module. So, this patch adds __GFP_NOWARN to avoid this message. Splat looks like: [ 2171.200049][ T1860] WARNING: CPU: 1 PID: 1860 at mm/page_alloc.c:4713 __alloc_pages_nodemask+0x2f3/0x740 [ 2171.238885][ T1860] Modules linked in: gtp veth openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv] [ 2171.262680][ T1860] CPU: 1 PID: 1860 Comm: gtp-link Not tainted 5.5.0+ #321 [ 2171.263567][ T1860] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 2171.264681][ T1860] RIP: 0010:__alloc_pages_nodemask+0x2f3/0x740 [ 2171.265332][ T1860] Code: 64 fe ff ff 65 48 8b 04 25 c0 0f 02 00 48 05 f0 12 00 00 41 be 01 00 00 00 49 89 47 0 [ 2171.267301][ T1860] RSP: 0018:ffff8880b51af1f0 EFLAGS: 00010246 [ 2171.268320][ T1860] RAX: ffffed1016a35e43 RBX: 0000000000000000 RCX: 0000000000000000 [ 2171.269517][ T1860] RDX: 0000000000000000 RSI: 000000000000000b RDI: 0000000000000000 [ 2171.270305][ T1860] RBP: 0000000000040cc0 R08: ffffed1018893109 R09: dffffc0000000000 [ 2171.275973][ T1860] R10: 0000000000000001 R11: ffffed1018893108 R12: 1ffff11016a35e43 [ 2171.291039][ T1860] R13: 000000000000000b R14: 000000000000000b R15: 00000000000f4240 [ 2171.292328][ T1860] FS: 00007f53cbc83740(0000) GS:ffff8880da000000(0000) knlGS:0000000000000000 [ 2171.293409][ T1860] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2171.294586][ T1860] CR2: 000055f540014508 CR3: 00000000b49f2004 CR4: 00000000000606e0 [ 2171.295424][ T1860] Call Trace: [ 2171.295756][ T1860] ? mark_held_locks+0xa5/0xe0 [ 2171.296659][ T1860] ? __alloc_pages_slowpath+0x21b0/0x21b0 [ 2171.298283][ T1860] ? gtp_encap_enable_socket+0x13e/0x400 [gtp] [ 2171.298962][ T1860] ? alloc_pages_current+0xc1/0x1a0 [ 2171.299475][ T1860] kmalloc_order+0x22/0x80 [ 2171.299936][ T1860] kmalloc_order_trace+0x1d/0x140 [ 2171.300437][ T1860] __kmalloc+0x302/0x3a0 [ 2171.300896][ T1860] gtp_newlink+0x293/0xba0 [gtp] [ ... ] Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Eric Dumazet authored
[ Upstream commit cb3c0e6b ] NLA_BINARY can be confusing, since .len value represents the max size of the blob. cls_rsvp really wants user space to provide long enough data for TCA_RSVP_DST and TCA_RSVP_SRC attributes. BUG: KMSAN: uninit-value in rsvp_get net/sched/cls_rsvp.h:258 [inline] BUG: KMSAN: uninit-value in gen_handle net/sched/cls_rsvp.h:402 [inline] BUG: KMSAN: uninit-value in rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572 CPU: 1 PID: 13228 Comm: syz-executor.1 Not tainted 5.5.0-rc5-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1c9/0x220 lib/dump_stack.c:118 kmsan_report+0xf7/0x1e0 mm/kmsan/kmsan_report.c:118 __msan_warning+0x58/0xa0 mm/kmsan/kmsan_instr.c:215 rsvp_get net/sched/cls_rsvp.h:258 [inline] gen_handle net/sched/cls_rsvp.h:402 [inline] rsvp_change+0x1ae9/0x4220 net/sched/cls_rsvp.h:572 tc_new_tfilter+0x31fe/0x5010 net/sched/cls_api.c:2104 rtnetlink_rcv_msg+0xcb7/0x1570 net/core/rtnetlink.c:5415 netlink_rcv_skb+0x451/0x650 net/netlink/af_netlink.c:2477 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:5442 netlink_unicast_kernel net/netlink/af_netlink.c:1302 [inline] netlink_unicast+0xf9e/0x1100 net/netlink/af_netlink.c:1328 netlink_sendmsg+0x1248/0x14d0 net/netlink/af_netlink.c:1917 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x45b349 Code: ad b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b6 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f269d43dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007f269d43e6d4 RCX: 000000000045b349 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 000000000075bfc8 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000009c2 R14: 00000000004cb338 R15: 000000000075bfd4 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:144 [inline] kmsan_internal_poison_shadow+0x66/0xd0 mm/kmsan/kmsan.c:127 kmsan_slab_alloc+0x8a/0xe0 mm/kmsan/kmsan_hooks.c:82 slab_alloc_node mm/slub.c:2774 [inline] __kmalloc_node_track_caller+0xb40/0x1200 mm/slub.c:4382 __kmalloc_reserve net/core/skbuff.c:141 [inline] __alloc_skb+0x2fd/0xac0 net/core/skbuff.c:209 alloc_skb include/linux/skbuff.h:1049 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1174 [inline] netlink_sendmsg+0x7d3/0x14d0 net/netlink/af_netlink.c:1892 sock_sendmsg_nosec net/socket.c:639 [inline] sock_sendmsg net/socket.c:659 [inline] ____sys_sendmsg+0x12b6/0x1350 net/socket.c:2330 ___sys_sendmsg net/socket.c:2384 [inline] __sys_sendmsg+0x451/0x5f0 net/socket.c:2417 __do_sys_sendmsg net/socket.c:2426 [inline] __se_sys_sendmsg+0x97/0xb0 net/socket.c:2424 __x64_sys_sendmsg+0x4a/0x70 net/socket.c:2424 do_syscall_64+0xb8/0x160 arch/x86/entry/common.c:296 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 6fa8c014 ("[NET_SCHED]: Use nla_policy for attribute validation in classifiers") Signed-off-by: Eric Dumazet <edumazet@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Acked-by: Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
[ Upstream commit 34ca70ef ] As discussed in the strace issue tracker, it appears that the sparc32 sysvipc support has been broken for the past 11 years. It was however working in compat mode, which is how it must have escaped most of the regular testing. The problem is that a cleanup patch inadvertently changed the uid/gid fields in struct ipc64_perm from 32-bit types to 16-bit types in uapi headers. Both glibc and uclibc-ng still use the original types, so they should work fine with compat mode, but not natively. Change the definitions to use __kernel_uid32_t and __kernel_gid32_t again. Fixes: 83c86984 ("sparc: unify ipcbuf.h") Link: https://github.com/strace/strace/issues/116 Cc: <stable@vger.kernel.org> # v2.6.29 Cc: Sam Ravnborg <sam@ravnborg.org> Cc: "Dmitry V . Levin" <ldv@altlinux.org> Cc: Rich Felker <dalias@libc.org> Cc: libc-alpha@sourceware.org Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Luca Coelho authored
[ Upstream commit b3f20e09 ] We had a check on !NVM_EXT and then a check for NVM_SDP in the else block of this if. The else block, obviously, could only be reached if using NVM_EXT, so it would never be NVM_SDP. Fix that by checking whether the nvm_type is IWL_NVM instead of checking for !IWL_NVM_EXT to solve this issue. Reported-by: Stefan Sperling <stsp@stsp.name> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
John Ogness authored
[ Upstream commit def97da1 ] Commit f92b070f ("printk: Do not miss new messages when replaying the log") introduced a new variable @exclusive_console_stop_seq to store when an exclusive console should stop printing. It should be set to the @console_seq value at registration. However, @console_seq is previously set to @syslog_seq so that the exclusive console knows where to begin. This results in the exclusive console immediately reactivating all the other consoles and thus repeating the messages for those consoles. Set @console_seq after @exclusive_console_stop_seq has stored the current @console_seq value. Fixes: f92b070f ("printk: Do not miss new messages when replaying the log") Link: http://lkml.kernel.org/r/20191219115322.31160-1-john.ogness@linutronix.de Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: John Ogness <john.ogness@linutronix.de> Acked-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com> Signed-off-by: Petr Mladek <pmladek@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jan Kara authored
[ Upstream commit 15fb05fd ] UDF 2.60 standard states in section 2.2.14.2: A partition with Access Type 3 (rewritable) shall define a Freed Space Bitmap or a Freed Space Table, see 2.3.3. All other partitions shall not define a Freed Space Bitmap or a Freed Space Table. Rewritable partitions are used on media that require some form of preprocessing before re-writing data (for example legacy MO). Such partitions shall use Access Type 3. Overwritable partitions are used on media that do not require preprocessing before overwriting data (for example: CD-RW, DVD-RW, DVD+RW, DVD-RAM, BD-RE, HD DVD-Rewritable). Such partitions shall use Access Type 4. however older versions of the standard didn't have this wording and there are tools out there that create UDF filesystems with rewritable partitions but that don't contain a Freed Space Bitmap or a Freed Space Table on media that does not require pre-processing before overwriting a block. So instead of forcing media with rewritable partition read-only, base this decision on presence of a Freed Space Bitmap or a Freed Space Table. Reported-by: Pali Rohár <pali.rohar@gmail.com> Reviewed-by: Pali Rohár <pali.rohar@gmail.com> Fixes: b085fbe2 ("udf: Fix crash during mount") Link: https://lore.kernel.org/linux-fsdevel/20200112144735.hj2emsoy4uwsouxz@paliSigned-off-by: Jan Kara <jack@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Pawan Gupta authored
[ Upstream commit 5efc6fa9 ] /proc/cpuinfo currently reports Hardware Lock Elision (HLE) feature to be present on boot cpu even if it was disabled during the bootup. This is because cpuinfo_x86->x86_capability HLE bit is not updated after TSX state is changed via the new MSR IA32_TSX_CTRL. Update the cached HLE bit also since it is expected to change after an update to CPUID_CLEAR bit in MSR IA32_TSX_CTRL. Fixes: 95c5824f ("x86/cpu: Add a "tsx=" cmdline option with TSX disabled by default") Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Reviewed-by: Dave Hansen <dave.hansen@linux.intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/2529b99546294c893dfa1c89e2b3e46da3369a59.1578685425.git.pawan.kumar.gupta@linux.intel.comSigned-off-by: Sasha Levin <sashal@kernel.org>
-
Gang He authored
[ Upstream commit 2d797e9f ] Writing a cloned file triggers a kernel oops and the user-space command process is also killed by the system. The bug can be reproduced stably via: 1) create a file under ocfs2 file system directory. journalctl -b > aa.txt 2) create a cloned file for this file. reflink aa.txt bb.txt 3) write the cloned file with dd command. dd if=/dev/zero of=bb.txt bs=512 count=1 conv=notrunc The dd command is killed by the kernel, then you can see the oops message via dmesg command. [ 463.875404] BUG: kernel NULL pointer dereference, address: 0000000000000028 [ 463.875413] #PF: supervisor read access in kernel mode [ 463.875416] #PF: error_code(0x0000) - not-present page [ 463.875418] PGD 0 P4D 0 [ 463.875425] Oops: 0000 [#1] SMP PTI [ 463.875431] CPU: 1 PID: 2291 Comm: dd Tainted: G OE 5.3.16-2-default [ 463.875433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Bochs 01/01/2011 [ 463.875500] RIP: 0010:ocfs2_refcount_cow+0xa4/0x5d0 [ocfs2] [ 463.875505] Code: 06 89 6c 24 38 89 eb f6 44 24 3c 02 74 be 49 8b 47 28 [ 463.875508] RSP: 0018:ffffa2cb409dfce8 EFLAGS: 00010202 [ 463.875512] RAX: ffff8b1ebdca8000 RBX: 0000000000000001 RCX: ffff8b1eb73a9df0 [ 463.875515] RDX: 0000000000056a01 RSI: 0000000000000000 RDI: 0000000000000000 [ 463.875517] RBP: 0000000000000001 R08: ffff8b1eb73a9de0 R09: 0000000000000000 [ 463.875520] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000000 [ 463.875522] R13: ffff8b1eb922f048 R14: 0000000000000000 R15: ffff8b1eb922f048 [ 463.875526] FS: 00007f8f44d15540(0000) GS:ffff8b1ebeb00000(0000) knlGS:0000000000000000 [ 463.875529] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 463.875532] CR2: 0000000000000028 CR3: 000000003c17a000 CR4: 00000000000006e0 [ 463.875546] Call Trace: [ 463.875596] ? ocfs2_inode_lock_full_nested+0x18b/0x960 [ocfs2] [ 463.875648] ocfs2_file_write_iter+0xaf8/0xc70 [ocfs2] [ 463.875672] new_sync_write+0x12d/0x1d0 [ 463.875688] vfs_write+0xad/0x1a0 [ 463.875697] ksys_write+0xa1/0xe0 [ 463.875710] do_syscall_64+0x60/0x1f0 [ 463.875743] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 463.875758] RIP: 0033:0x7f8f4482ed44 [ 463.875762] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 80 00 00 00 [ 463.875765] RSP: 002b:00007fff300a79d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 463.875769] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f8f4482ed44 [ 463.875771] RDX: 0000000000000200 RSI: 000055f771b5c000 RDI: 0000000000000001 [ 463.875774] RBP: 0000000000000200 R08: 00007f8f44af9c78 R09: 0000000000000003 [ 463.875776] R10: 000000000000089f R11: 0000000000000246 R12: 000055f771b5c000 [ 463.875779] R13: 0000000000000200 R14: 0000000000000000 R15: 000055f771b5c000 This regression problem was introduced by commit e74540b2 ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()"). Link: http://lkml.kernel.org/r/20200121050153.13290-1-ghe@suse.com Fixes: e74540b2 ("ocfs2: protect extent tree in ocfs2_prepare_inode_for_write()"). Signed-off-by: Gang He <ghe@suse.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Johan Hovold authored
[ Upstream commit 1b257870 ] Make sure to use the current alternate setting, which need not be the first one by index, when verifying the endpoint descriptors and initialising the URBs. Failing to do so could cause the driver to misbehave or trigger a WARN() in usb_submit_urb() that kernels with panic_on_warn set would choke on. Fixes: 26ff6313 ("[media] Add support for the IguanaWorks USB IR Transceiver") Fixes: ab1cbdf1 ("media: iguanair: add sanity checks") Cc: stable <stable@vger.kernel.org> # 3.6 Cc: Oliver Neukum <oneukum@suse.com> Signed-off-by: Johan Hovold <johan@kernel.org> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
YueHaibing authored
[ Upstream commit f6d061d6 ] In module_add_modinfo_attrs() if sysfs_create_file() fails on the first iteration of the loop (so i = 0), we forget to free the modinfo_attrs. Fixes: bc6f2a75 ("kernel/module: Fix mem leak in module_add_modinfo_attrs") Reviewed-by: Miroslav Benes <mbenes@suse.cz> Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Jessica Yu <jeyu@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Miklos Szeredi authored
[ Upstream commit a4ac9d45 ] ovl_lseek() is using ssize_t to return the value from vfs_llseek(). On a 32-bit kernel ssize_t is a 32-bit signed int, which overflows above 2 GB. Assign the return value of vfs_llseek() to loff_t to fix this. Reported-by: Boris Gjenero <boris.gjenero@gmail.com> Fixes: 9e46b840 ("ovl: support stacked SEEK_HOLE/SEEK_DATA") Cc: <stable@vger.kernel.org> # v4.19 Signed-off-by: Miklos Szeredi <mszeredi@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Icenowy Zheng authored
[ Upstream commit a00d17e0 ] This reverts commit da676c6a. The original commit adds a start parameter to the calculation of the start delay according to some old BSP versions from Allwinner. However, there're two ways to add this delay -- add it in DSI controller or add it in the TCON. Add it in both controllers won't work. The code before this commit is picked from new versions of BSP kernel, which has a comment for the 1 that says "put start_delay to tcon". By checking the sun4i_tcon0_mode_set_cpu() in sun4i_tcon driver, it has already added this delay, so we shouldn't repeat to add the delay in DSI controller, otherwise the timing won't match. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Maxime Ripard <mripard@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20191001080253.6135-2-icenowy@aosc.ioSigned-off-by: Sasha Levin <sashal@kernel.org>
-
- 05 Feb, 2020 25 commits
-
-
Greg Kroah-Hartman authored
-
Wei Yang authored
[ Upstream commit dfe9aa23 ] If we get here after successfully adding page to list, err would be 1 to indicate the page is queued in the list. Current code has two problems: * on success, 0 is not returned * on error, if add_page_for_migratioin() return 1, and the following err1 from do_move_pages_to_node() is set, the err1 is not returned since err is 1 And these behaviors break the user interface. Link: http://lkml.kernel.org/r/20200119065753.21694-1-richardw.yang@linux.intel.com Fixes: e0153fc2 ("mm: move_pages: return valid node id in status if the page is already on the target node"). Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Acked-by: Yang Shi <yang.shi@linux.alibaba.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Christoph Lameter <cl@linux.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Jin Yao authored
[ Upstream commit c3314a74 ] Commit 800d3f56 ("perf report: Add warning when libunwind not compiled in") breaks the s390 platform. S390 uses libdw-dwarf-unwind for call chain unwinding and had no support for libunwind. So the warning "Please install libunwind development packages during the perf build." caused the confusion even if the call-graph is displayed correctly. This patch adds checking for HAVE_DWARF_SUPPORT, which is set when libdw-dwarf-unwind is compiled in. Fixes: 800d3f56 ("perf report: Add warning when libunwind not compiled in") Signed-off-by: Jin Yao <yao.jin@linux.intel.com> Reviewed-by: Thomas Richter <tmricht@linux.ibm.com> Tested-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Jin Yao <yao.jin@intel.com> Cc: Kan Liang <kan.liang@linux.intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20200107191745.18415-1-yao.jin@linux.intel.comSigned-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Josef Bacik authored
commit d55966c4 upstream. There was some logic added a while ago to clear out f_bavail in statfs() if we did not have enough free metadata space to satisfy our global reserve. This was incorrect at the time, however didn't really pose a problem for normal file systems because we would often allocate chunks if we got this low on free metadata space, and thus wouldn't really hit this case unless we were actually full. Fast forward to today and now we are much better about not allocating metadata chunks all of the time. Couple this with d792b0f1 ("btrfs: always reserve our entire size for the global reserve") which now means we'll easily have a larger global reserve than our free space, we are now more likely to trip over this while still having plenty of space. Fix this by skipping this logic if the global rsv's space_info is not full. space_info->full is 0 unless we've attempted to allocate a chunk for that space_info and that has failed. If this happens then the space for the global reserve is definitely sacred and we need to report b_avail == 0, but before then we can just use our calculated b_avail. Reported-by: Martin Steigerwald <martin@lichtvoll.de> Fixes: ca8a51b3 ("btrfs: statfs: report zero available if metadata are exhausted") CC: stable@vger.kernel.org # 4.5+ Reviewed-by: Qu Wenruo <wqu@suse.com> Tested-By: Martin Steigerwald <martin@lichtvoll.de> Signed-off-by: Josef Bacik <josef@toxicpanda.com> Reviewed-by: David Sterba <dsterba@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Praveen Chaudhary authored
[ Upstream commit 189c9b1e ] skb->csum is updated incorrectly, when manipulation for NF_NAT_MANIP_SRC\DST is done on IPV6 packet. Fix: There is no need to update skb->csum in inet_proto_csum_replace16(), because update in two fields a.) IPv6 src/dst address and b.) L4 header checksum cancels each other for skb->csum calculation. Whereas inet_proto_csum_replace4 function needs to update skb->csum, because update in 3 fields a.) IPv4 src/dst address, b.) IPv4 Header checksum and c.) L4 header checksum results in same diff as L4 Header checksum for skb->csum calculation. [ pablo@netfilter.org: a few comestic documentation edits ] Signed-off-by: Praveen Chaudhary <pchaudhary@linkedin.com> Signed-off-by: Zhenggen Xu <zxu@linkedin.com> Signed-off-by: Andy Stracner <astracner@linkedin.com> Reviewed-by: Florian Westphal <fw@strlen.de> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vasily Averin authored
[ Upstream commit 66018a10 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vasily Averin authored
[ Upstream commit 70a87287 ] if seq_file .next fuction does not change position index, read after some lseek can generate unexpected output. https://bugzilla.kernel.org/show_bug.cgi?id=206283Signed-off-by: Vasily Averin <vvs@virtuozzo.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Madalin Bucur authored
[ Upstream commit 457bfc0a ] As the only 10G PHY interface type defined at the moment the code was developed was XGMII, although the PHY interface mode used was not XGMII, XGMII was used in the code to denote 10G. This patch renames the 10G interface mode to remove the ambiguity. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Madalin Bucur authored
[ Upstream commit 1d3ca681 ] When fsl,erratum-a011043 is set, adjust for erratum A011043: MDIO reads to internal PCS registers may result in having the MDIO_CFG[MDIO_RD_ER] bit set, even when there is no error and read data (MDIO_DATA[MDIO_DATA]) is correct. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Madalin Bucur authored
[ Upstream commit 73d527ae ] Add fsl,erratum-a011043 to internal MDIO buses. Software may get false read error when reading internal PCS registers through MDIO. As a workaround, all internal MDIO accesses should ignore the MDIO_CFG[MDIO_RD_ER] bit. Signed-off-by: Madalin Bucur <madalin.bucur@oss.nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Manish Chopra authored
[ Upstream commit 22e98449 ] Driver while collecting firmware dump takes longer time to collect/process some of the firmware dump entries/memories. Bigger capture masks makes it worse as it results in larger amount of data being collected and results in CPU soft lockup. Place cond_resched() in some of the driver flows that are expectedly time consuming to relinquish the CPU to avoid CPU soft lockup panic. Signed-off-by: Shahed Shaikh <shshaikh@marvell.com> Tested-by: Yonggen Xu <Yonggen.Xu@dell.com> Signed-off-by: Manish Chopra <manishc@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Raag Jadav authored
[ Upstream commit b0b03951 ] Set d0 and d1 pin directions for spi0 and spi1 as per their pinmux. Signed-off-by: Raag Jadav <raagjadav@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hayes Wang authored
[ Upstream commit 9583a363 ] Initailization would reset runtime suspend by tp->saved_wolopts, so the tp->saved_wolopts should be set before initializing. Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Ellerman authored
[ Upstream commit 78f7a756 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command. Some of the commands are handled in readrids(), where the user controlled command is converted into a driver-internal value called "ridcode". There are two command values, AIROGWEPKTMP and AIROGWEPKNV, which correspond to ridcode values of RID_WEP_TEMP and RID_WEP_PERM respectively. These commands both have checks that the user has CAP_NET_ADMIN, with the comment that "Only super-user can read WEP keys", otherwise they return -EPERM. However there is another command value, AIRORRID, that lets the user specify the ridcode value directly, with no other checks. This means the user can bypass the CAP_NET_ADMIN check on AIROGWEPKTMP and AIROGWEPKNV. Fix it by moving the CAP_NET_ADMIN check out of the command handling and instead do it later based on the ridcode. That way regardless of whether the ridcode is set via AIROGWEPKTMP or AIROGWEPKNV, or passed in using AIRORID, we always do the CAP_NET_ADMIN check. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Ellerman authored
[ Upstream commit d6bce213 ] The driver for Cisco Aironet 4500 and 4800 series cards (airo.c), implements AIROOLDIOCTL/SIOCDEVPRIVATE in airo_ioctl(). The ioctl handler copies an aironet_ioctl struct from userspace, which includes a command and a length. Some of the commands are handled in readrids(), which kmalloc()'s a buffer of RIDSIZE (2048) bytes. That buffer is then passed to PC4500_readrid(), which has two cases. The else case does some setup and then reads up to RIDSIZE bytes from the hardware into the kmalloc()'ed buffer. Here len == RIDSIZE, pBuf is the kmalloc()'ed buffer: // read the rid length field bap_read(ai, pBuf, 2, BAP1); // length for remaining part of rid len = min(len, (int)le16_to_cpu(*(__le16*)pBuf)) - 2; ... // read remainder of the rid rc = bap_read(ai, ((__le16*)pBuf)+1, len, BAP1); PC4500_readrid() then returns to readrids() which does: len = comp->len; if (copy_to_user(comp->data, iobuf, min(len, (int)RIDSIZE))) { Where comp->len is the user controlled length field. So if the "rid length field" returned by the hardware is < 2048, and the user requests 2048 bytes in comp->len, we will leak the previous contents of the kmalloc()'ed buffer to userspace. Fix it by kzalloc()'ing the buffer. Found by Ilja by code inspection, not tested as I don't have the required hardware. Reported-by: Ilja Van Sprundel <ivansprundel@ioactive.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vincenzo Frascino authored
[ Upstream commit 9e0caab8 ] The optee driver uses specific page table types to verify if a memory region is normal. These types are not defined in nommu systems. Trying to compile the driver in these systems results in a build error: linux/drivers/tee/optee/call.c: In function ‘is_normal_memory’: linux/drivers/tee/optee/call.c:533:26: error: ‘L_PTE_MT_MASK’ undeclared (first use in this function); did you mean ‘PREEMPT_MASK’? return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~ PREEMPT_MASK linux/drivers/tee/optee/call.c:533:26: note: each undeclared identifier is reported only once for each function it appears in linux/drivers/tee/optee/call.c:533:44: error: ‘L_PTE_MT_WRITEALLOC’ undeclared (first use in this function) return (pgprot_val(p) & L_PTE_MT_MASK) == L_PTE_MT_WRITEALLOC; ^~~~~~~~~~~~~~~~~~~ Make the optee driver depend on MMU to fix the compilation issue. Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> [jw: update commit title] Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Vladimir Murzin authored
[ Upstream commit 6849b5eb ] Updates to the Generic Timer architecture allow ID_PFR1.GenTimer to have values other than 0 or 1 while still preserving backward compatibility. At the moment, Linux is quite strict in the way it handles this field at early boot and will not configure arch timer if it doesn't find the value 1. Since here use ubfx for arch timer version extraction (hyb-stub build with -march=armv7-a, so it is safe) To help backports (even though the code was correct at the time of writing) Fixes: 8ec58be9 ("ARM: virt: arch_timers: enable access to physical timers") Acked-by: Marc Zyngier <maz@kernel.org> Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Hannes Reinecke authored
[ Upstream commit 0e220962 ] When a link is going down the driver will be calling fnic_cleanup_io(), which will traverse all commands and calling 'done' for each found command. While the traversal is handled under the host_lock, calling 'done' happens after the host_lock is being dropped. As fnic_queuecommand_lck() is being called with the host_lock held, it might well be that it will pick the command being selected for abortion from the above routine and enqueue it for sending, but then 'done' is being called on that very command from the above routine. Which of course confuses the hell out of the scsi midlayer. So fix this by not queueing commands when fnic_cleanup_io is active. Link: https://lore.kernel.org/r/20200116102053.62755-1-hare@suse.deSigned-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Xu Wang authored
[ Upstream commit 8aaea2b0 ] When do IPv6 tunnel PMTU update and calls __ip6_rt_update_pmtu() in the end, we should not call dst_confirm_neigh() as there is no two-way communication. Signed-off-by: Xu Wang <vulab@iscas.ac.cn> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nicolas Dichtel authored
[ Upstream commit f042365d ] With an ebpf program that redirects packets through a xfrm interface, packets are dropped because no dst is attached to skb. This could also be reproduced with an AF_PACKET socket, with the following python script (xfrm1 is a xfrm interface): import socket send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) # scapy # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request') # raw(p) req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00' send_s.sendto(req, ('xfrm1', 0x800, 0, 0)) It was also not possible to send an ip packet through an AF_PACKET socket because a LL header was expected. Let's remove those LL header constraints. Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Nicolas Dichtel authored
[ Upstream commit 95224166 ] With an ebpf program that redirects packets through a vti[6] interface, the packets are dropped because no dst is attached. This could also be reproduced with an AF_PACKET socket, with the following python script (vti1 is an ip_vti interface): import socket send_s = socket.socket(socket.AF_PACKET, socket.SOCK_RAW, 0) # scapy # p = IP(src='10.100.0.2', dst='10.200.0.1')/ICMP(type='echo-request') # raw(p) req = b'E\x00\x00\x1c\x00\x01\x00\x00@\x01e\xb2\nd\x00\x02\n\xc8\x00\x01\x08\x00\xf7\xff\x00\x00\x00\x00' send_s.sendto(req, ('vti1', 0x800, 0, 0)) Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Matwey V. Kornilov authored
[ Upstream commit 5abd45ea ] BeagleBone Black series is equipped with 512MB RAM whereas only 256MB is included from am335x-bone-common.dtsi This leads to an issue with unusual setups when devicetree is loaded by GRUB2 directly. Signed-off-by: Matwey V. Kornilov <matwey@sai.msu.ru> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Haim Dreyfuss authored
[ Upstream commit 2763bba6 ] When receiving a new MCC driver get all the data about the new country code and its regulatory information. Mistakenly, we ignored the cap field, which includes global regulatory information which should be applies to every channel. Fix it. Signed-off-by: Haim Dreyfuss <haim.dreyfuss@intel.com> Signed-off-by: Luca Coelho <luciano.coelho@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Ilie Halip authored
[ Upstream commit 95f4d9cc ] Temporary files used in the VDSO build process linger on even after make mrproper: vdso-dummy.o.tmp, vdso.so.dbg.tmp. Delete them once they're no longer needed. Signed-off-by: Ilie Halip <ilie.halip@gmail.com> Signed-off-by: Paul Walmsley <paul.walmsley@sifive.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
-
Michael Chan authored
[ Upstream commit 6fc7caa8 ] Fix bnxt_fltr_match() to match ipv6 source and destination addresses. The function currently only checks ipv4 addresses and will not work corrently on ipv6 filters. Fixes: c0c050c5 ("bnxt_en: New Broadcom ethernet driver.") Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>
-