- 27 Aug, 2017 37 commits
-
-
Dan Carpenter authored
This function is broken. It sets the wrong front_end to NULL. But it's not used, so let's just delete it. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com>
-
Dan Carpenter authored
The dib9000_remove_slave_frontend() function isn't used. I was reviewing it because my static checker claims it writes one element beyond the end of the array. That's a false positive. What it actually does is, if there are two or more front ends, then it prints a debug message to say that it removed the first one, stored in state->fe[1], and then it "removes" (scare quotes on purpose) the second one, stored in state->fe[2]. Deleting a front end from the middle is not really supported and breaks code like dib9000_release() which assumes the first NULL front end marks the end of the list. Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by:
Bhumika Goyal <bhumirks@gmail.com> Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by:
-
Bhumika Goyal authored
Make this const as it is only stored in a const field of a video_device structure. Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used during a copy operation. Signed-off-by:
Mike Isely <isely@pobox.com> Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are either used during a copy operation or passed to a const argument of the function cx88_vdev_init. Signed-off-by:
-
Bhumika Goyal authored
Make these const as they are only used during a copy operation. Done using Coccinelle: @match disable optional_qualifier@ identifier s; @@ static struct video_device s = {...}; @ref@ position p; identifier match.s; @@ s@p @good1@ identifier match.s; expression list[3] es; position ref.p; @@ cx88_vdev_init(es,&s@p,...) @good2@ position ref.p; identifier match.s,f,c; expression e; @@ ( e = s@p | e = s@p.f | c(...,s@p.f,...) | c(...,s@p,...) ) @bad depends on !good1 && !good2@ position ref.p; identifier match.s; @@ s@p @depends on forall !bad disable optional_qualifier@ identifier match.s; @@ static + const struct video_device s; Signed-off-by: -
Arnd Bergmann authored
When RC_CORE is a loadable module, and au0828 is built-in including the RC support, we get a link error: drivers/media/usb/au0828/au0828-input.o: In function `au0828_get_key_au8522': au0828-input.c:(.text+0x474): undefined reference to `ir_raw_event_store' drivers/media/usb/au0828/au0828-input.o: In function `au0828_rc_register': au0828-input.c:(.text+0x7c8): undefined reference to `rc_allocate_device' au0828-input.c:(.text+0x8f8): undefined reference to `rc_register_device' This adds an additional dependency, similar to the one for em28xx, to ensure the broken configuration is never used. Fixes: 2fcfd317 ("[media] au0828: add support for IR on HVR-950Q") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Gustavo A. R. Silva authored
Refactor code in order to avoid identical code for different branches. This issue was detected with the help of Coccinelle. Addresses-Coverity-ID: 1226795 Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Fabio Estevam authored
platform_get_irq() may fail, so we should better check its return value and propagate it in the case of error. Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by:
-
Sakari Ailus authored
Some CSI-2 transmitters will finish an ongoing frame whereas others will not. Document that receiver drivers should not assume a particular behaviour but to work in both cases. Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Daniel Scheller authored
Since the cab_* codepath doesn't recognize QAM_AUTO, don't announce that it is supported when it really isn't. Fixes ie. w_scan from unconditionally using QAM_AUTO on DVB-C scans. Signed-off-by:
Daniel Scheller <d.scheller@gmx.net> Signed-off-by:
-
Cihangir Akturk authored
Use setup_timer function instead of initializing timer with the function and data fields. Generated by: scripts/coccinelle/api/setup_timer.cocci. Signed-off-by:
Cihangir Akturk <cakturk@gmail.com> Reviewed-by:
Philipp Zabel <p.zabel@pengutronix.de> Reviewed-by:
Steve Longerbeam <steve_longerbeam@mentor.com> Tested-by:
-
Eugeniu Rosca authored
Reviewing the delta between cppcheck output of v4.9.39 and v4.9.40 stable updates, I stumbled on the new warning: mxl111sf.c:80: (warning) Possible null pointer dereference: rbuf Since copying state->rcvbuf into rbuf is not needed in the 'write-only' scenario (i.e. calling mxl111sf_ctrl_msg() from mxl111sf_i2c_send_data() or from mxl111sf_write_reg()), bypass memcpy() in this case. Fixes: d90b336f ("[media] mxl111sf: Fix driver to use heap allocate buffers for USB messages") Signed-off-by:
Eugeniu Rosca <erosca@de.adit-jv.com> Reviewed-by:
Michael Ira Krufky <mkrufky@linuxtv.org> Signed-off-by:
-
Gustavo A. R. Silva authored
Call mutex_unlock and free dev on failure. Reported-by:
Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Anton Vasilyev authored
If dw2102_probe() fails on dvb_usb_device_init(), then memleak occurs. The patch adds deallocation to the error path. Found by Linux Driver Verification project (linuxtesting.org). Signed-off-by:
Anton Vasilyev <vasilyev@ispras.ru> Reviewed-by:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
-
Daniel Scheller authored
The demodulator supports symbol rates as low as 100Ksyms/s - the demod setup in start() already handles such low symbol rates and reviewers of stv0910 equipped cards even found and tested transponders with SRs in that range. So, announce this in the fe_ops. Cc: Ralph Metzler <rjkm@metzlerbros.de> Cc: Richard Scobie <r.scobie@clear.net.nz> Signed-off-by:
-
Daniel Scheller authored
The buffer mode of the cxd2099 driver requires more work regarding error handling and thus can cause issues in some cases, so disable it by default and make that mode of operation controllable by users via a module parameter (ie. 'modprobe cxd2099 buffermode=1' enables current behaviour). The upstream codebase also has the buffer mode disabled by default, so we should match this (but users still can test things out using the modparm). Signed-off-by:
Jasmin Jessich <jasmin@anw.at> Signed-off-by:
-
Daniel Scheller authored
Fix several drivers/media/pci/ddbridge/ddbridge-core.c: warning: symbol ... was not declared. Should it be static? drivers/media/pci/ddbridge/ddbridge-core.c: warning: Using plain integer as NULL pointer drivers/media/pci/ddbridge/ddbridge-io.h: warning: cast removes address space of expression drivers/media/pci/ddbridge/ddbridge-io.h: warning: incorrect type in argument 1 (different address spaces) at multiple places. Cc: Ralph Metzler <rjkm@metzlerbros.de> Signed-off-by:
-
Daniel Scheller authored
Brought to attention by Matthias Schwarzott <zzam@gentoo.org> by fixing possible use-after-free faults in some demod drivers: In ddb_input_detach(), the i2c_client is unregistered and removed before dvb frontends are unregistered and detached. While no use-after-free issue was observed so far, there is another issue with this: dvb->attached keeps track of the state of the input/output registration, and the i2c_client unregistration takes place only if everything was successful (dvb->attached == 0x31). If for some reason an error occurred during the frontend setup, that value stays at 0x20. In the following error handling and cleanup, ddb_input_detach() will skip down to that state, leaving the i2c_client registered, causing refcount issues. Fix this by moving the i2c_client deregistration down to case 0x20. Cc: Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
-
Daniel Scheller authored
Whenever write_reg() fails to open/close the demod's I2C gate, release the lock to avoid deadlocking situations. If I2c gate open failed, there's no need to hold a lock, and if close fails, the mutex_unlock() at the end of the function is never reached, leaving the mutex_lock in locked state, which in turn will cause potential for deadlocks. Thus, release the lock on failure. While we're touching gate_ctrl(), add some explanation about the need for locking and the shared I2C bus/gate. Cc: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by:
-
Matthias Schwarzott authored
Calling i2c_unregister_device for a demod driver destroys the frontend object. Later it is accessed by calling dvb_unregister_frontend and dvb_frontend_detach. In some cases this leads to a general protection fault with this callstack: dvb_unregister_frontend+0x25/0x50 [dvb_core] dvb_fini+0xdb/0x160 [cx231xx_dvb] cx231xx_unregister_extension+0x3d/0xb0 [cx231xx] cx231xx_dvb_unregister+0x10/0x809 [cx231xx_dvb] SyS_delete_module+0x18a/0x240 ? exit_to_usermode_loop+0x7b/0x80 entry_SYSCALL_64_fastpath+0x17/0x98 Signed-off-by:
Matthias Schwarzott <zzam@gentoo.org> Signed-off-by:
-
Matthias Schwarzott authored
Unregistering the i2c_client of the demod driver destroys the frontend object. Calling vb2_dvb_unregister_bus later accesses the frontend (and with the refcount_t) conversion the refcount_t code complains: kernel: ------------[ cut here ]------------ kernel: WARNING: CPU: 0 PID: 7883 at lib/refcount.c:128 refcount_sub_and_test+0x70/0x80 kernel: refcount_t: underflow; use-after-free. kernel: Modules linked in: bluetooth si2165(O) a8293(O) tda10071(O) tea5767(O) tuner(O) cx23885(O-) tda18271(O) videobuf2_dvb(O) videobuf2_dma_sg(O) m88ds3103(O) tveeprom(O) cx2341x(O) v4l2_common(O) dvb_core(O) rc_core(O) videobuf2_memops(O) videobuf2_v4l2(O) ums_realtek videobuf2_core(O) uas videodev(O) media(O) rtl8192cu i2c_mux usb_storage rtl_usb rtl8192c_common rtlwifi snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core x86_pkg_temp_thermal kvm_intel kvm irqbypass kernel: CPU: 0 PID: 7883 Comm: rmmod Tainted: G W O 4.11.3-gentoo #3 kernel: Hardware name: MEDION E2050 2391/H81H3-EM2, BIOS H81EM2W08.308 08/25/2014 kernel: Call Trace: kernel: dump_stack+0x4d/0x66 kernel: __warn+0xc6/0xe0 kernel: warn_slowpath_fmt+0x46/0x50 kernel: ? kobject_put+0x2f/0x60 kernel: refcount_sub_and_test+0x70/0x80 kernel: refcount_dec_and_test+0x11/0x20 kernel: dvb_unregister_frontend+0x42/0x60 [dvb_core] kernel: vb2_dvb_dealloc_frontends+0x9e/0x100 [videobuf2_dvb] kernel: vb2_dvb_unregister_bus+0xd/0x20 [videobuf2_dvb] kernel: cx23885_dvb_unregister+0xc3/0x110 [cx23885] kernel: cx23885_dev_unregister+0xea/0x150 [cx23885] kernel: cx23885_finidev+0x4f/0x70 [cx23885] kernel: pci_device_remove+0x34/0xb0 kernel: device_release_driver_internal+0x150/0x200 kernel: driver_detach+0x33/0x70 kernel: bus_remove_driver+0x47/0xa0 kernel: driver_unregister+0x27/0x50 kernel: pci_unregister_driver+0x34/0x90 kernel: cx23885_fini+0x10/0x12 [cx23885] kernel: SyS_delete_module+0x166/0x220 kernel: ? exit_to_usermode_loop+0x7b/0x80 kernel: entry_SYSCALL_64_fastpath+0x17/0x98 kernel: RIP: 0033:0x7f5901680b07 kernel: RSP: 002b:00007ffdf6cdb028 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 kernel: RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007f5901680b07 kernel: RDX: 000000000000000a RSI: 0000000000000800 RDI: 0000000001500258 kernel: RBP: 00000000015001f0 R08: 0000000000000000 R09: 1999999999999999 kernel: R10: 0000000000000884 R11: 0000000000000206 R12: 00007ffdf6cda010 kernel: R13: 0000000000000000 R14: 00000000015001f0 R15: 00000000014ff010 kernel: ---[ end trace c3a4659b89086061 ]--- Signed-off-by:
-
Dan Carpenter authored
These clamp_t() calls are no-ops because we don't save the results. It leads to an array out of bounds bug. Fixes: a49d2536 ("staging/atomisp: Add support for the Intel IPU v2") Signed-off-by:
-
Harold Gomez authored
Do not include the paragraph about writing to the Free Software Foundation's mailing address from the sample GPL notice. The FSF has changed addresses in the past, and may do so again. Linux already includes a copy of the GPL. remove the unnecessary paragraph Signed-off-by:
Harold Gomez <haroldgmz11@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
Making some functions 'static' has uncovered a few functions that have no caller, through the gcc warnings: atomisp/i2c/imx/imx.c:1111:12: error: 'imx_t_focus_vcm' defined but not used [-Werror=unused-function] atomisp/i2c/imx/imx.c:1103:12: error: 'imx_vcm_init' defined but not used [-Werror=unused-function] atomisp/i2c/imx/imx.c:1095:12: error: 'imx_vcm_power_down' defined but not used [-Werror=unused-function] atomisp/i2c/imx/imx.c:1087:12: error: 'imx_vcm_power_up' defined but not used [-Werror=unused-function] All four of these can be removed. Since they call indirect functions, I also looked at how those are used in turn: - The power_up/power_down callbacks are called from other functions and are still needed. - The t_focus_vcm callbacks pointers are completely unused and can be removed in both imx and ov8858. Some of the handlers are called directly and can now be marked static, the others are dummy implemntations that we can remove. - vcm_init is unused in imx, but dw9718_vcm_init is used in ov8858, but is not used in imx, so that one needs to stay around. The callback pointers in imx can be removed. Fixes: 9a5a6911 ("staging: imx: fix non-static declarations") Signed-off-by:
-
Sakari Ailus authored
Add the as3645a flash controller to the DT source. Signed-off-by:
Sebastian Reichel <sebastian.reichel@collabora.co.uk> Acked-by:
Pavel Machek <pavel@ucw.cz> Signed-off-by:
-
Sakari Ailus authored
Add a LED flash class driver for the as3654a flash controller. A V4L2 flash driver for it already exists (drivers/media/i2c/as3645a.c), and this driver is based on that. Signed-off-by:
Jacek Anaszewski <jacek.anaszewski@gmail.com> Signed-off-by:
-
Sakari Ailus authored
Document DT bindings for Analog Devices as3645a flash LED controller which also supports an indicator LED. Signed-off-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Sakari Ailus authored
The v4l2_flash_init() keeps a reference to the ops struct but not to the config struct (nor anything it contains). Document this. Signed-off-by:
-
Sakari Ailus authored
The V4L2 flash interface allows controlling multiple LEDs through a single sub-devices if, and only if, these LEDs are of different types. This approach scales badly for flash controllers that drive multiple flash LEDs or for LED specific associations. Essentially, the original assumption of a LED driver chip that drives a single flash LED and an indicator LED is no longer valid. Address the matter by registering one sub-device per LED. Signed-off-by:
-
Rui Miguel Silva authored
We are allocating memory for the v4l2 flash configuration structure and leak it in the normal path. Just use the stack for this as we do not use it outside of this function. Also use IS_ERR() instead of IS_ERR_OR_NULL() to check return value from v4l2_flash_init() for it never returns NULL. Fixes: 2870b52b ("greybus: lights: add lights implementation") Reported-by:
Rui Miguel Silva <rmfrfs@gmail.com> Reviewed-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
-
Mauro Carvalho Chehab authored
Solve the following issues: Documentation/media/uapi/v4l/dev-sliced-vbi.rst:208: ERROR: Content block expected for the "raw" directive; none found. Documentation/media/uapi/v4l/dev-sliced-vbi.rst:216: ERROR: Content block expected for the "raw" directive; none found. Documentation/media/uapi/v4l/pixfmt-packed-rgb.rst:645: ERROR: Content block expected for the "raw" directive; none found. Fixes: 70b074df ("media: fix pdf build with Spinx 1.6") Signed-off-by:
-
Christophe JAILLET authored
Check memory allocation failure and return -ENOMEM in such a case. Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
-
Arnd Bergmann authored
A debug printk statement was copied incorrectly into the new csi1 parser code and causes a warning there: drivers/media/platform/omap3isp/isp.c: In function 'isp_probe': include/linux/dynamic_debug.h:134:3: error: 'i' may be used uninitialized in this function [-Werror=maybe-uninitialized] Since there is only one lane, the index is never set. This changes the debug print to always print a zero instead, keeping the original format of the message. Fixes: 9211434b ("media: omap3isp: Parse CSI1 configuration from the device tree") Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by:
-
Mauro Carvalho Chehab authored
Sphinx 1.6 generates some LaTeX code before each table, starting its own environment before calling tabulary, apparently to improve table layout. The problem is that such environment is incompatible with adjustbox. While, in thesis, it should be possible to override it or to redefine tabulary, I was unable to produce such patch. Also, that would likely break on some future Sphinx version. So, instead, let's just change the font size on bigger tables, in order for them to fit into the page size. That is not as good as adjustbox, and require some manual work, but it should be less sensitive to Sphinx changes. While here, adjust a few other tables whose text is exceeding the cell boundaries. Signed-off-by:
-
- 26 Aug, 2017 3 commits
-
-
Mauro Carvalho Chehab authored
As reported by smatch: drivers/media/platform/qcom/camss-8x16/camss-vfe.c:1136 vfe_release_wm() error: buffer overflow 'vfe->wm_output_map' 7 <= 7 Signed-off-by: -
Mauro Carvalho Chehab authored
Fix those warnings when building on i386: drivers/media/platform/qcom/camss-8x16/camss-csiphy.c:333:22: warning: constant 1000000000000 is so big it is long long drivers/media/platform/qcom/camss-8x16/camss-csiphy.c:339:32: warning: constant 1000000000000 is so big it is long long Signed-off-by: -
Todor Tomov authored
Add abbreviations explanation at the top header blocks in source files. Signed-off-by:
Todor Tomov <todor.tomov@linaro.org> Signed-off-by:
-
