Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2024-03-01 (ixgbe, i40e, ice)

This series contains updates to ixgbe, i40e, and ice drivers.

Maciej corrects disable flow for ixgbe, i40e, and ice drivers which could
cause non-functional interface with AF_XDP.

Michal restores host configuration when changing MSI-X count for VFs on
ice driver.

* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: reconfig host after changing MSI-X on VF
  ice: reorder disabling IRQ and NAPI in ice_qp_dis
  i40e: disable NAPI right after disabling irqs when handling xsk_pool
  ixgbe: {dis, en}able irqs in ixgbe_txrx_ring_{dis, en}able
====================

Link: https://lore.kernel.org/r/20240301192549.2993798-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Based on the static analyzis of the code it looks like when an entry
from the MAC table was removed, the entry was still used after being
freed. More precise the vid of the mac_entry was used after calling
devm_kfree on the mac_entry.
The fix consists in first using the vid of the mac_entry to delete the
entry from the HW and after that to free it.

Fixes: b37a1bae ("net: sparx5: add mactable support")
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20240301080608.3053468-1-horatiu.vultur@microchip.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Matthieu Baerts says:

====================
selftests: mptcp: fixes for diag.sh

Here are two patches fixing issues in MPTCP diag.sh kselftest:

- Patch 1 makes sure the exit code is '1' in case of error, and not the
  test ID, not to return an exit code that would be wrongly interpreted
  by the ksefltests framework, e.g. '4' means 'skip'.

- Patch 2 avoids waiting for unnecessary conditions, which can cause
  timeouts in some very slow environments.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>

When creating a lot of listener sockets, it is enough to wait only for
the last one, like we are doing before in diag.sh for other subtests.

If we do a check for each listener sockets, each time listing all
available sockets, it can take a very long time in very slow
environments, at the point we can reach some timeout.

When using the debug kconfig, the waiting time switches from more than
8 sec to 0.1 sec on my side. In slow/busy environments, and with a poll
timeout set to 30 ms, the waiting time could go up to ~100 sec because
the listener socket would timeout and stop, while the script would still
be checking one by one if all sockets are ready. The result is that
after having waited for everything to be ready, all sockets have been
stopped due to a timeout, and it is too late for the script to check how
many there were.

While at it, also removed ss options we don't need: we only need the
filtering options, to count how many listener sockets have been created.
We don't need to ask ss to display internal TCP information, and the
memory if the output is dropped by the 'wc -l' command anyway.

Fixes: b4b51d36 ("selftests: mptcp: explicitly trigger the listener diag code-path")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/r/20240301063754.2ecefecf@kernel.orgSigned-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

The test counter 'test_cnt' should not be returned in diag.sh, e.g. what
if only the 4th test fail? Will do 'exit 4' which is 'exit ${KSFT_SKIP}',
the whole test will be marked as skipped instead of 'failed'!

So we should do ret=${KSFT_FAIL} instead.

Fixes: df62f2ec ("selftests/mptcp: add diag interface tests")
Cc: stable@vger.kernel.org
Fixes: 42fb6cdd ("selftests: mptcp: more stable diag tests")
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

If message fills up we need to stop writing. 'break' will
only get us out of the iteration over pools of a single
netdev, we need to also stop walking netdevs.

This results in either infinite dump, or missing pools,
depending on whether message full happens on the last
netdev (infinite dump) or non-last (missing pools).

Fixes: 950ab53b ("net: page_pool: implement GET in the netlink API")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

syzbot triggered a bug in geneve_rx() [1]

Issue is similar to the one I fixed in commit 8d975c15
("ip6_tunnel: make sure to pull inner header in __ip6_tnl_rcv()")

We have to save skb->network_header in a temporary variable
in order to be able to recompute the network_header pointer
after a pskb_inet_may_pull() call.

pskb_inet_may_pull() makes sure the needed headers are in skb->head.

[1]
BUG: KMSAN: uninit-value in IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
 BUG: KMSAN: uninit-value in geneve_rx drivers/net/geneve.c:279 [inline]
 BUG: KMSAN: uninit-value in geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
  IP_ECN_decapsulate include/net/inet_ecn.h:302 [inline]
  geneve_rx drivers/net/geneve.c:279 [inline]
  geneve_udp_encap_recv+0x36f9/0x3c10 drivers/net/geneve.c:391
  udp_queue_rcv_one_skb+0x1d39/0x1f20 net/ipv4/udp.c:2108
  udp_queue_rcv_skb+0x6ae/0x6e0 net/ipv4/udp.c:2186
  udp_unicast_rcv_skb+0x184/0x4b0 net/ipv4/udp.c:2346
  __udp4_lib_rcv+0x1c6b/0x3010 net/ipv4/udp.c:2422
  udp_rcv+0x7d/0xa0 net/ipv4/udp.c:2604
  ip_protocol_deliver_rcu+0x264/0x1300 net/ipv4/ip_input.c:205
  ip_local_deliver_finish+0x2b8/0x440 net/ipv4/ip_input.c:233
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_local_deliver+0x21f/0x490 net/ipv4/ip_input.c:254
  dst_input include/net/dst.h:461 [inline]
  ip_rcv_finish net/ipv4/ip_input.c:449 [inline]
  NF_HOOK include/linux/netfilter.h:314 [inline]
  ip_rcv+0x46f/0x760 net/ipv4/ip_input.c:569
  __netif_receive_skb_one_core net/core/dev.c:5534 [inline]
  __netif_receive_skb+0x1a6/0x5a0 net/core/dev.c:5648
  process_backlog+0x480/0x8b0 net/core/dev.c:5976
  __napi_poll+0xe3/0x980 net/core/dev.c:6576
  napi_poll net/core/dev.c:6645 [inline]
  net_rx_action+0x8b8/0x1870 net/core/dev.c:6778
  __do_softirq+0x1b7/0x7c5 kernel/softirq.c:553
  do_softirq+0x9a/0xf0 kernel/softirq.c:454
  __local_bh_enable_ip+0x9b/0xa0 kernel/softirq.c:381
  local_bh_enable include/linux/bottom_half.h:33 [inline]
  rcu_read_unlock_bh include/linux/rcupdate.h:820 [inline]
  __dev_queue_xmit+0x2768/0x51c0 net/core/dev.c:4378
  dev_queue_xmit include/linux/netdevice.h:3171 [inline]
  packet_xmit+0x9c/0x6b0 net/packet/af_packet.c:276
  packet_snd net/packet/af_packet.c:3081 [inline]
  packet_sendmsg+0x8aef/0x9f10 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  __sys_sendto+0x735/0xa10 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Uninit was created at:
  slab_post_alloc_hook mm/slub.c:3819 [inline]
  slab_alloc_node mm/slub.c:3860 [inline]
  kmem_cache_alloc_node+0x5cb/0xbc0 mm/slub.c:3903
  kmalloc_reserve+0x13d/0x4a0 net/core/skbuff.c:560
  __alloc_skb+0x352/0x790 net/core/skbuff.c:651
  alloc_skb include/linux/skbuff.h:1296 [inline]
  alloc_skb_with_frags+0xc8/0xbd0 net/core/skbuff.c:6394
  sock_alloc_send_pskb+0xa80/0xbf0 net/core/sock.c:2783
  packet_alloc_skb net/packet/af_packet.c:2930 [inline]
  packet_snd net/packet/af_packet.c:3024 [inline]
  packet_sendmsg+0x70c2/0x9f10 net/packet/af_packet.c:3113
  sock_sendmsg_nosec net/socket.c:730 [inline]
  __sock_sendmsg net/socket.c:745 [inline]
  __sys_sendto+0x735/0xa10 net/socket.c:2191
  __do_sys_sendto net/socket.c:2203 [inline]
  __se_sys_sendto net/socket.c:2199 [inline]
  __x64_sys_sendto+0x125/0x1c0 net/socket.c:2199
  do_syscall_x64 arch/x86/entry/common.c:52 [inline]
  do_syscall_64+0xcf/0x1e0 arch/x86/entry/common.c:83
 entry_SYSCALL_64_after_hwframe+0x63/0x6b

Fixes: 2d07dc79 ("geneve: add initial netdev driver for GENEVE tunnels")
Reported-and-tested-by: syzbot+6a1423ff3f97159aae64@syzkaller.appspotmail.com
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

I'm updating __assign_str() and will be removing the second parameter. To
make sure that it does not break anything, I make sure that it matches the
__string() field, as that is where the string is actually going to be
saved in. To make sure there's nothing that breaks, I added a WARN_ON() to
make sure that what was used in __string() is the same that is used in
__assign_str().

In doing this change, an error was triggered as __assign_str() now expects
the string passed in to be a char * value. I instead had the following
warning:

include/trace/events/qdisc.h: In function ‘trace_event_raw_event_qdisc_reset’:
include/trace/events/qdisc.h:91:35: error: passing argument 1 of 'strcmp' from incompatible pointer type [-Werror=incompatible-pointer-types]
   91 |                 __assign_str(dev, qdisc_dev(q));

That's because the qdisc_enqueue() and qdisc_reset() pass in qdisc_dev(q)
to __assign_str() and to __string(). But that function returns a pointer
to struct net_device and not a string.

It appears that these events are just saving the pointer as a string and
then reading it as a string as well.

Use qdisc_dev(q)->name to save the device instead.

Fixes: a34dac0b ("net_sched: add tracepoints for qdisc_reset() and qdisc_destroy()")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

During VSI reconfiguration filters and VSI config which is set in
ice_vf_init_host_cfg() are lost. Recall the host configuration function
to restore them.

Without this config VF on which MSI-X amount was changed might had a
connection problems.

Fixes: 4d38cb44 ("ice: manage VFs MSI-X using resource tracking")
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Signed-off-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Rafal Romanowski <rafal.romanowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

ice_qp_dis() currently does things in very mixed way. Tx is stopped
before disabling IRQ on related queue vector, then it takes care of
disabling Rx and finally NAPI is disabled.

Let us start with disabling IRQs in the first place followed by turning
off NAPI. Then it is safe to handle queues.

One subtle change on top of that is that even though ice_qp_ena() looks
more sane, clear ICE_CFG_BUSY as the last thing there.

Fixes: 2d4238f5 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Disable NAPI before shutting down queues that this particular NAPI
contains so that the order of actions in i40e_queue_pair_disable()
mirrors what we do in i40e_queue_pair_enable().

Fixes: 123cecd4 ("i40e: added queue pair disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Currently routines that are supposed to toggle state of ring pair do not
take care of associated interrupt with queue vector that these rings
belong to. This causes funky issues such as dead interface due to irq
misconfiguration, as per Pavel's report from Closes: tag.

Add a function responsible for disabling single IRQ in EIMC register and
call this as a very first thing when disabling ring pair during xsk_pool
setup. For enable let's reuse ixgbe_irq_enable_queues(). Besides this,
disable/enable NAPI as first/last thing when dealing with closing or
opening ring pair that xsk_pool is being configured on.
Reported-by: Pavel Vazharov <pavel@x3me.net>
Closes: https://lore.kernel.org/netdev/CAJEV1ijxNyPTwASJER1bcZzS9nMoZJqfR86nu_3jFFVXzZQ4NA@mail.gmail.com/
Fixes: 024aa580 ("ixgbe: added Rx/Tx ring disable/enable functions")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Acked-by: Magnus Karlsson <magnus.karlsson@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

Add myself as co-maintainer for Socionext netsec driver.
This commit also removes Jassi from maintainer since he
no longer has a Developerbox.

Cc: Jassi Brar <jaswinder.singh@linaro.org>
Cc: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Masahisa Kojima <kojima.masahisa@socionext.com>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>

It is now possible to disable BQL, but that causes the cpsw driver to break:

drivers/net/ethernet/ti/am65-cpsw-nuss.c:297:28: error: no member named 'dql' in 'struct netdev_queue'
  297 |                    dql_avail(&netif_txq->dql),

There is already a helper function in net/sch_generic.h that could
be used to help here. Move its implementation into the common
linux/netdevice.h along with the other bql interfaces and change
both users over to the new interface.

Fixes: ea7f3cfa ("net: bql: allow the config to be disabled")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

Current driver has some asymmetry in the runtime PM calls. On lan78xx_open()
it will call usb_autopm_get() and unconditionally usb_autopm_put(). And
on lan78xx_stop() it will call only usb_autopm_put(). So far, it was
working only because this driver do not activate autosuspend by default,
so it was visible only by warning "Runtime PM usage count underflow!".

Since, with current driver, we can't use runtime PM with active link,
execute lan78xx_open()->usb_autopm_put() only in error case. Otherwise,
keep ref counting high as long as interface is open.

Fixes: 55d7de9d ("Microchip's LAN7800 family USB 2/3 to 10/100/1000 Ethernet device driver")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The internal delay properties are not mandatory and should have a
documented default value. The device only supports either no delay or a
fixed delay and the device reset default is no delay, document the
default as no delay.
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bluetooth, WiFi and netfilter.

  We have one outstanding issue with the stmmac driver, which may be a
  LOCKDEP false positive, not a blocker.

  Current release - regressions:

   - netfilter: nf_tables: re-allow NFPROTO_INET in
     nft_(match/target)_validate()

   - eth: ionic: fix error handling in PCI reset code

  Current release - new code bugs:

   - eth: stmmac: complete meta data only when enabled, fix null-deref

   - kunit: fix again checksum tests on big endian CPUs

  Previous releases - regressions:

   - veth: try harder when allocating queue memory

   - Bluetooth:
      - hci_bcm4377: do not mark valid bd_addr as invalid
      - hci_event: fix handling of HCI_EV_IO_CAPA_REQUEST

  Previous releases - always broken:

   - info leak in __skb_datagram_iter() on netlink socket

   - mptcp:
      - map v4 address to v6 when destroying subflow
      - fix potential wake-up event loss due to sndbuf auto-tuning
      - fix double-free on socket dismantle

   - wifi: nl80211: reject iftype change with mesh ID change

   - fix small out-of-bound read when validating netlink be16/32 types

   - rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back

   - ipv6: fix potential "struct net" ref-leak in inet6_rtm_getaddr()

   - ip_tunnel: prevent perpetual headroom growth with huge number of
     tunnels on top of each other

   - mctp: fix skb leaks on error paths of mctp_local_output()

   - eth: ice: fixes for DPLL state reporting

   - dpll: rely on rcu for netdev_dpll_pin() to prevent UaF

   - eth: dpaa: accept phy-interface-type = '10gbase-r' in the device
     tree"

* tag 'net-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (73 commits)
  dpll: fix build failure due to rcu_dereference_check() on unknown type
  kunit: Fix again checksum tests on big endian CPUs
  tls: fix use-after-free on failed backlog decryption
  tls: separate no-async decryption request handling from async
  tls: fix peeking with sync+async decryption
  tls: decrement decrypt_pending if no async completion will be called
  gtp: fix use-after-free and null-ptr-deref in gtp_newlink()
  net: hsr: Use correct offset for HSR TLV values in supervisory HSR frames
  igb: extend PTP timestamp adjustments to i211
  rtnetlink: fix error logic of IFLA_BRIDGE_FLAGS writing back
  tools: ynl: fix handling of multiple mcast groups
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  ...

Pull Landlock fix from Mickaël Salaün:
 "Fix a potential issue when handling inodes with inconsistent
  properties"

* tag 'landlock-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux:
  landlock: Fix asymmetric private inodes referring

Tasmiya reports that their compiler complains that we deref
a pointer to unknown type with rcu_dereference_rtnl():

include/linux/rcupdate.h:439:9: error: dereferencing pointer to incomplete type ‘struct dpll_pin’

Unclear what compiler it is, at the moment, and we can't report
but since DPLL can't be a module - move the code from the header
into the source file.

Fixes: 0d60d8df ("dpll: rely on rcu for netdev_dpll_pin()")
Reported-by: Tasmiya Nalatwad <tasmiya@linux.vnet.ibm.com>
Link: https://lore.kernel.org/all/3fcf3a2c-1c1b-42c1-bacb-78fdcd700389@linux.vnet.ibm.com/Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20240229190515.2740221-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Commit b38460bc ("kunit: Fix checksum tests on big endian CPUs")
fixed endianness issues with kunit checksum tests, but then
commit 6f4c45cb ("kunit: Add tests for csum_ipv6_magic and
ip_fast_csum") introduced new issues on big endian CPUs. Those issues
are once again reflected by the warnings reported by sparse.

So, fix them with the same approach, perform proper conversion in
order to support both little and big endian CPUs. Once the conversions
are properly done and the right types used, the sparse warnings are
cleared as well.
Reported-by: Erhard Furtner <erhard_f@mailbox.org>
Fixes: 6f4c45cb ("kunit: Add tests for csum_ipv6_magic and ip_fast_csum")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Link: https://lore.kernel.org/r/73df3a9e95c2179119398ad1b4c84cdacbd8dfb6.1708684443.git.christophe.leroy@csgroup.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - mgmt: Fix limited discoverable off timeout
 - hci_qca: Set BDA quirk bit if fwnode exists in DT
 - hci_bcm4377: do not mark valid bd_addr as invalid
 - hci_sync: Check the correct flag before starting a scan
 - Enforce validation on max value of connection interval
 - hci_sync: Fix accept_list when attempting to suspend
 - hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
 - Avoid potential use-after-free in hci_error_reset
 - rfcomm: Fix null-ptr-deref in rfcomm_check_security
 - hci_event: Fix wrongly recorded wakeup BD_ADDR
 - qca: Fix wrong event type for patch config command
 - qca: Fix triggering coredump implementation

* tag 'for-net-2024-02-28' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: qca: Fix triggering coredump implementation
  Bluetooth: hci_qca: Set BDA quirk bit if fwnode exists in DT
  Bluetooth: qca: Fix wrong event type for patch config command
  Bluetooth: Enforce validation on max value of connection interval
  Bluetooth: hci_event: Fix handling of HCI_EV_IO_CAPA_REQUEST
  Bluetooth: mgmt: Fix limited discoverable off timeout
  Bluetooth: hci_event: Fix wrongly recorded wakeup BD_ADDR
  Bluetooth: rfcomm: Fix null-ptr-deref in rfcomm_check_security
  Bluetooth: hci_sync: Fix accept_list when attempting to suspend
  Bluetooth: Avoid potential use-after-free in hci_error_reset
  Bluetooth: hci_sync: Check the correct flag before starting a scan
  Bluetooth: hci_bcm4377: do not mark valid bd_addr as invalid
====================

Link: https://lore.kernel.org/r/20240228145644.2269088-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Sabrina Dubroca says:

====================
tls: a few more fixes for async decrypt

The previous patchset [1] took care of "full async". This adds a few
fixes for cases where only part of the crypto operations go the async
route, found by extending my previous debug patch [2] to do N
synchronous operations followed by M asynchronous ops (with N and M
configurable).

[1] https://patchwork.kernel.org/project/netdevbpf/list/?series=823784&state=*
[2] https://lore.kernel.org/all/9d664093b1bf7f47497b2c40b3a085b45f3274a2.1694021240.git.sd@queasysnail.net/
====================

Link: https://lore.kernel.org/r/cover.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When the decrypt request goes to the backlog and crypto_aead_decrypt
returns -EBUSY, tls_do_decryption will wait until all async
decryptions have completed. If one of them fails, tls_do_decryption
will return -EBADMSG and tls_decrypt_sg jumps to the error path,
releasing all the pages. But the pages have been passed to the async
callback, and have already been released by tls_decrypt_done.

The only true async case is when crypto_aead_decrypt returns
 -EINPROGRESS. With -EBUSY, we already waited so we can tell
tls_sw_recvmsg that the data is available for immediate copy, but we
need to notify tls_decrypt_sg (via the new ->async_done flag) that the
memory has already been released.

Fixes: 85905414 ("net: tls: handle backlogging of crypto requests")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/4755dd8d9bebdefaa19ce1439b833d6199d4364c.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we're not doing async, the handling is much simpler. There's no
reference counting, we just need to wait for the completion to wake us
up and return its result.

We should preferably also use a separate crypto_wait. I'm not seeing a
UAF as I did in the past, I think aec79619 ("tls: fix race between
async notify and socket close") took care of it.

This will make the next fix easier.
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/47bde5f649707610eaef9f0d679519966fc31061.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If we peek from 2 records with a currently empty rx_list, and the
first record is decrypted synchronously but the second record is
decrypted async, the following happens:
  1. decrypt record 1 (sync)
  2. copy from record 1 to the userspace's msg
  3. queue the decrypted record to rx_list for future read(!PEEK)
  4. decrypt record 2 (async)
  5. queue record 2 to rx_list
  6. call process_rx_list to copy data from the 2nd record

We currently pass copied=0 as skip offset to process_rx_list, so we
end up copying once again from the first record. We should skip over
the data we've already copied.

Seen with selftest tls.12_aes_gcm.recv_peek_large_buf_mult_recs

Fixes: 692d7b5d ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/1b132d2b2b99296bfde54e8a67672d90d6d16e71.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

With mixed sync/async decryption, or failures of crypto_aead_decrypt,
we increment decrypt_pending but we never do the corresponding
decrement since tls_decrypt_done will not be called. In this case, we
should decrement decrypt_pending immediately to avoid getting stuck.

For example, the prequeue prequeue test gets stuck with mixed
modes (one async decrypt + one sync decrypt).

Fixes: 94524d8f ("net/tls: Add support for async decryption of tls records")
Signed-off-by: Sabrina Dubroca <sd@queasysnail.net>
Link: https://lore.kernel.org/r/c56d5fc35543891d5319f834f25622360e1bfbec.1709132643.git.sd@queasysnail.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The gtp_link_ops operations structure for the subsystem must be
registered after registering the gtp_net_ops pernet operations structure.

Syzkaller hit 'general protection fault in gtp_genl_dump_pdp' bug:

[ 1010.702740] gtp: GTP module unloaded
[ 1010.715877] general protection fault, probably for non-canonical address 0xdffffc0000000001: 0000 [#1] SMP KASAN NOPTI
[ 1010.715888] KASAN: null-ptr-deref in range [0x0000000000000008-0x000000000000000f]
[ 1010.715895] CPU: 1 PID: 128616 Comm: a.out Not tainted 6.8.0-rc6-std-def-alt1 #1
[ 1010.715899] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.0-alt1 04/01/2014
[ 1010.715908] RIP: 0010:gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.715915] Code: 80 3c 02 00 0f 85 41 04 00 00 48 8b bb d8 05 00 00 e8 ed f6 ff ff 48 89 c2 48 89 c5 48 b8 00 00 00 00 00 fc ff df 48 c1 ea 03 <80> 3c 02 00 0f 85 4f 04 00 00 4c 89 e2 4c 8b 6d 00 48 b8 00 00 00
[ 1010.715920] RSP: 0018:ffff888020fbf180 EFLAGS: 00010203
[ 1010.715929] RAX: dffffc0000000000 RBX: ffff88800399c000 RCX: 0000000000000000
[ 1010.715933] RDX: 0000000000000001 RSI: ffffffff84805280 RDI: 0000000000000282
[ 1010.715938] RBP: 000000000000000d R08: 0000000000000001 R09: 0000000000000000
[ 1010.715942] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88800399cc80
[ 1010.715947] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000400
[ 1010.715953] FS:  00007fd1509ab5c0(0000) GS:ffff88805b300000(0000) knlGS:0000000000000000
[ 1010.715958] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1010.715962] CR2: 0000000000000000 CR3: 000000001c07a000 CR4: 0000000000750ee0
[ 1010.715968] PKRU: 55555554
[ 1010.715972] Call Trace:
[ 1010.715985]  ? __die_body.cold+0x1a/0x1f
[ 1010.715995]  ? die_addr+0x43/0x70
[ 1010.716002]  ? exc_general_protection+0x199/0x2f0
[ 1010.716016]  ? asm_exc_general_protection+0x1e/0x30
[ 1010.716026]  ? gtp_newlink+0x4d7/0x9c0 [gtp]
[ 1010.716034]  ? gtp_net_exit+0x150/0x150 [gtp]
[ 1010.716042]  __rtnl_newlink+0x1063/0x1700
[ 1010.716051]  ? rtnl_setlink+0x3c0/0x3c0
[ 1010.716063]  ? is_bpf_text_address+0xc0/0x1f0
[ 1010.716070]  ? kernel_text_address.part.0+0xbb/0xd0
[ 1010.716076]  ? __kernel_text_address+0x56/0xa0
[ 1010.716084]  ? unwind_get_return_address+0x5a/0xa0
[ 1010.716091]  ? create_prof_cpu_mask+0x30/0x30
[ 1010.716098]  ? arch_stack_walk+0x9e/0xf0
[ 1010.716106]  ? stack_trace_save+0x91/0xd0
[ 1010.716113]  ? stack_trace_consume_entry+0x170/0x170
[ 1010.716121]  ? __lock_acquire+0x15c5/0x5380
[ 1010.716139]  ? mark_held_locks+0x9e/0xe0
[ 1010.716148]  ? kmem_cache_alloc_trace+0x35f/0x3c0
[ 1010.716155]  ? __rtnl_newlink+0x1700/0x1700
[ 1010.716160]  rtnl_newlink+0x69/0xa0
[ 1010.716166]  rtnetlink_rcv_msg+0x43b/0xc50
[ 1010.716172]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716179]  ? lock_acquire+0x1fe/0x560
[ 1010.716188]  ? netlink_deliver_tap+0x12f/0xd50
[ 1010.716196]  netlink_rcv_skb+0x14d/0x440
[ 1010.716202]  ? rtnl_fdb_dump+0x9f0/0x9f0
[ 1010.716208]  ? netlink_ack+0xab0/0xab0
[ 1010.716213]  ? netlink_deliver_tap+0x202/0xd50
[ 1010.716220]  ? netlink_deliver_tap+0x218/0xd50
[ 1010.716226]  ? __virt_addr_valid+0x30b/0x590
[ 1010.716233]  netlink_unicast+0x54b/0x800
[ 1010.716240]  ? netlink_attachskb+0x870/0x870
[ 1010.716248]  ? __check_object_size+0x2de/0x3b0
[ 1010.716254]  netlink_sendmsg+0x938/0xe40
[ 1010.716261]  ? netlink_unicast+0x800/0x800
[ 1010.716269]  ? __import_iovec+0x292/0x510
[ 1010.716276]  ? netlink_unicast+0x800/0x800
[ 1010.716284]  __sock_sendmsg+0x159/0x190
[ 1010.716290]  ____sys_sendmsg+0x712/0x880
[ 1010.716297]  ? sock_write_iter+0x3d0/0x3d0
[ 1010.716304]  ? __ia32_sys_recvmmsg+0x270/0x270
[ 1010.716309]  ? lock_acquire+0x1fe/0x560
[ 1010.716315]  ? drain_array_locked+0x90/0x90
[ 1010.716324]  ___sys_sendmsg+0xf8/0x170
[ 1010.716331]  ? sendmsg_copy_msghdr+0x170/0x170
[ 1010.716337]  ? lockdep_init_map_type+0x2c7/0x860
[ 1010.716343]  ? lockdep_hardirqs_on_prepare+0x430/0x430
[ 1010.716350]  ? debug_mutex_init+0x33/0x70
[ 1010.716360]  ? percpu_counter_add_batch+0x8b/0x140
[ 1010.716367]  ? lock_acquire+0x1fe/0x560
[ 1010.716373]  ? find_held_lock+0x2c/0x110
[ 1010.716384]  ? __fd_install+0x1b6/0x6f0
[ 1010.716389]  ? lock_downgrade+0x810/0x810
[ 1010.716396]  ? __fget_light+0x222/0x290
[ 1010.716403]  __sys_sendmsg+0xea/0x1b0
[ 1010.716409]  ? __sys_sendmsg_sock+0x40/0x40
[ 1010.716419]  ? lockdep_hardirqs_on_prepare+0x2b3/0x430
[ 1010.716425]  ? syscall_enter_from_user_mode+0x1d/0x60
[ 1010.716432]  do_syscall_64+0x30/0x40
[ 1010.716438]  entry_SYSCALL_64_after_hwframe+0x62/0xc7
[ 1010.716444] RIP: 0033:0x7fd1508cbd49
[ 1010.716452] Code: 00 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d ef 70 0d 00 f7 d8 64 89 01 48
[ 1010.716456] RSP: 002b:00007fff18872348 EFLAGS: 00000202 ORIG_RAX: 000000000000002e
[ 1010.716463] RAX: ffffffffffffffda RBX: 000055f72bf0eac0 RCX: 00007fd1508cbd49
[ 1010.716468] RDX: 0000000000000000 RSI: 0000000020000280 RDI: 0000000000000006
[ 1010.716473] RBP: 00007fff18872360 R08: 00007fff18872360 R09: 00007fff18872360
[ 1010.716478] R10: 00007fff18872360 R11: 0000000000000202 R12: 000055f72bf0e1b0
[ 1010.716482] R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
[ 1010.716491] Modules linked in: gtp(+) udp_tunnel ib_core uinput af_packet rfkill qrtr joydev hid_generic usbhid hid kvm_intel iTCO_wdt intel_pmc_bxt iTCO_vendor_support kvm snd_hda_codec_generic ledtrig_audio irqbypass crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel snd_hda_intel nls_utf8 snd_intel_dspcfg nls_cp866 psmouse aesni_intel vfat crypto_simd fat cryptd glue_helper snd_hda_codec pcspkr snd_hda_core i2c_i801 snd_hwdep i2c_smbus xhci_pci snd_pcm lpc_ich xhci_pci_renesas xhci_hcd qemu_fw_cfg tiny_power_button button sch_fq_codel vboxvideo drm_vram_helper drm_ttm_helper ttm vboxsf vboxguest snd_seq_midi snd_seq_midi_event snd_seq snd_rawmidi snd_seq_device snd_timer snd soundcore msr fuse efi_pstore dm_mod ip_tables x_tables autofs4 virtio_gpu virtio_dma_buf drm_kms_helper cec rc_core drm virtio_rng virtio_scsi rng_core virtio_balloon virtio_blk virtio_net virtio_console net_failover failover ahci libahci libata evdev scsi_mod input_leds serio_raw virtio_pci intel_agp
[ 1010.716674]  virtio_ring intel_gtt virtio [last unloaded: gtp]
[ 1010.716693] ---[ end trace 04990a4ce61e174b ]---

Cc: stable@vger.kernel.org
Signed-off-by: Alexander Ofitserov <oficerovas@altlinux.org>
Fixes: 459aa660 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)")
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228114703.465107-1-oficerovas@altlinux.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

Patch #1 restores NFPROTO_INET with nft_compat, from Ignat Korchagin.

Patch #2 fixes an issue with bridge netfilter and broadcast/multicast
packets.

There is a day 0 bug in br_netfilter when used with connection tracking.

Conntrack assumes that an nf_conn structure that is not yet added to
hash table ("unconfirmed"), is only visible by the current cpu that is
processing the sk_buff.

For bridge this isn't true, sk_buff can get cloned in between, and
clones can be processed in parallel on different cpu.

This patch disables NAT and conntrack helpers for multicast packets.

Patch #3 adds a selftest to cover for the br_netfilter bug.

netfilter pull request 24-02-29

* tag 'nf-24-02-29' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  selftests: netfilter: add bridge conntrack + multicast test case
  netfilter: bridge: confirm multicast packets before passing them up the stack
  netfilter: nf_tables: allow NFPROTO_INET in nft_(match/target)_validate()
====================

Link: https://lore.kernel.org/r/20240229000135.8780-1-pablo@netfilter.orgSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Current HSR implementation uses following supervisory frame (even for
HSRv1 the HSR tag is not is not present):

00000000: 01 15 4e 00 01 2d XX YY ZZ 94 77 10 88 fb 00 01
00000010: 7e 1c 17 06 XX YY ZZ 94 77 10 1e 06 XX YY ZZ 94
00000020: 77 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00000030: 00 00 00 00 00 00 00 00 00 00 00 00

The current code adds extra two bytes (i.e. sizeof(struct hsr_sup_tlv))
when offset for skb_pull() is calculated.
This is wrong, as both 'struct hsrv1_ethhdr_sp' and 'hsrv0_ethhdr_sp'
already have 'struct hsr_sup_tag' defined in them, so there is no need
for adding extra two bytes.

This code was working correctly as with no RedBox support, the check for
HSR_TLV_EOT (0x00) was off by two bytes, which were corresponding to
zeroed padded bytes for minimal packet size.

Fixes: eafaa88b ("net: hsr: Add support for redbox supervision frames")
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Link: https://lore.kernel.org/r/20240228085644.3618044-1-lukma@denx.deSigned-off-by: Paolo Abeni <pabeni@redhat.com>

The i211 requires the same PTP timestamp adjustments as the i210,
according to its datasheet. To ensure consistent timestamping across
different platforms, this change extends the existing adjustments to
include the i211.

The adjustment result are tested and comparable for i210 and i211 based
systems.

Fixes: 3f544d2a ("igb: adjust PTP timestamps for Tx/Rx latency")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Pucha Himasekhar Reddy <himasekharx.reddy.pucha@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20240227184942.362710-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In the commit d73ef2d6 ("rtnetlink: let rtnl_bridge_setlink checks
IFLA_BRIDGE_MODE length"), an adjustment was made to the old loop logic
in the function `rtnl_bridge_setlink` to enable the loop to also check
the length of the IFLA_BRIDGE_MODE attribute. However, this adjustment
removed the `break` statement and led to an error logic of the flags
writing back at the end of this function.

if (have_flags)
    memcpy(nla_data(attr), &flags, sizeof(flags));
    // attr should point to IFLA_BRIDGE_FLAGS NLA !!!

Before the mentioned commit, the `attr` is granted to be IFLA_BRIDGE_FLAGS.
However, this is not necessarily true fow now as the updated loop will let
the attr point to the last NLA, even an invalid NLA which could cause
overflow writes.

This patch introduces a new variable `br_flag` to save the NLA pointer
that points to IFLA_BRIDGE_FLAGS and uses it to resolve the mentioned
error logic.

Fixes: d73ef2d6 ("rtnetlink: let rtnl_bridge_setlink checks IFLA_BRIDGE_MODE length")
Signed-off-by: Lin Ma <linma@zju.edu.cn>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20240227121128.608110-1-linma@zju.edu.cnSigned-off-by: Jakub Kicinski <kuba@kernel.org>

We never increment the group number iterator, so all groups
get recorded into index 0 of the mcast_groups[] array.

As a result YNL can only handle using the last group.
For example using the "netdev" sample on kernel with
page pool commands results in:

  $ ./samples/netdev
  YNL: Multicast group 'mgmt' not found

Most families have only one multicast group, so this hasn't
been noticed. Plus perhaps developers usually test the last
group which would have worked.

Fixes: 86878f14 ("tools: ynl: user space helpers")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Acked-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Link: https://lore.kernel.org/r/20240226214019.1255242-1-kuba@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Add test case for multicast packet confirm race.
Without preceding patch, this should result in:

 WARNING: CPU: 0 PID: 38 at net/netfilter/nf_conntrack_core.c:1198 __nf_conntrack_confirm+0x3ed/0x5f0
 Workqueue: events_unbound macvlan_process_broadcast
 RIP: 0010:__nf_conntrack_confirm+0x3ed/0x5f0
  ? __nf_conntrack_confirm+0x3ed/0x5f0
  nf_confirm+0x2ad/0x2d0
  nf_hook_slow+0x36/0xd0
  ip_local_deliver+0xce/0x110
  __netif_receive_skb_one_core+0x4f/0x70
  process_backlog+0x8c/0x130
  [..]
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

conntrack nf_confirm logic cannot handle cloned skbs referencing
the same nf_conn entry, which will happen for multicast (broadcast)
frames on bridges.

 Example:
    macvlan0
       |
      br0
     /  \
  ethX    ethY

 ethX (or Y) receives a L2 multicast or broadcast packet containing
 an IP packet, flow is not yet in conntrack table.

 1. skb passes through bridge and fake-ip (br_netfilter)Prerouting.
    -> skb->_nfct now references a unconfirmed entry
 2. skb is broad/mcast packet. bridge now passes clones out on each bridge
    interface.
 3. skb gets passed up the stack.
 4. In macvlan case, macvlan driver retains clone(s) of the mcast skb
    and schedules a work queue to send them out on the lower devices.

    The clone skb->_nfct is not a copy, it is the same entry as the
    original skb.  The macvlan rx handler then returns RX_HANDLER_PASS.
 5. Normal conntrack hooks (in NF_INET_LOCAL_IN) confirm the orig skb.

The Macvlan broadcast worker and normal confirm path will race.

This race will not happen if step 2 already confirmed a clone. In that
case later steps perform skb_clone() with skb->_nfct already confirmed (in
hash table).  This works fine.

But such confirmation won't happen when eb/ip/nftables rules dropped the
packets before they reached the nf_confirm step in postrouting.

Pablo points out that nf_conntrack_bridge doesn't allow use of stateful
nat, so we can safely discard the nf_conn entry and let inet call
conntrack again.

This doesn't work for bridge netfilter: skb could have a nat
transformation. Also bridge nf prevents re-invocation of inet prerouting
via 'sabotage_in' hook.

Work around this problem by explicit confirmation of the entry at LOCAL_IN
time, before upper layer has a chance to clone the unconfirmed entry.

The downside is that this disables NAT and conntrack helpers.

Alternative fix would be to add locking to all code parts that deal with
unconfirmed packets, but even if that could be done in a sane way this
opens up other problems, for example:

-m physdev --physdev-out eth0 -j SNAT --snat-to 1.2.3.4
-m physdev --physdev-out eth1 -j SNAT --snat-to 1.2.3.5

For multicast case, only one of such conflicting mappings will be
created, conntrack only handles 1:1 NAT mappings.

Users should set create a setup that explicitly marks such traffic
NOTRACK (conntrack bypass) to avoid this, but we cannot auto-bypass
them, ruleset might have accept rules for untracked traffic already,
so user-visible behaviour would change.
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Fixes: 1da177e4 ("Linux-2.6.12-rc2")
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217777Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Commit d0009eff ("netfilter: nf_tables: validate NFPROTO_* family") added
some validation of NFPROTO_* families in the nft_compat module, but it broke
the ability to use legacy iptables modules in dual-stack nftables.

While with legacy iptables one had to independently manage IPv4 and IPv6
tables, with nftables it is possible to have dual-stack tables sharing the
rules. Moreover, it was possible to use rules based on legacy iptables
match/target modules in dual-stack nftables.

As an example, the program from [2] creates an INET dual-stack family table
using an xt_bpf based rule, which looks like the following (the actual output
was generated with a patched nft tool as the current nft tool does not parse
dual stack tables with legacy match rules, so consider it for illustrative
purposes only):

table inet testfw {
  chain input {
    type filter hook prerouting priority filter; policy accept;
    bytecode counter packets 0 bytes 0 accept
  }
}

After d0009eff ("netfilter: nf_tables: validate NFPROTO_* family") we get
EOPNOTSUPP for the above program.

Fix this by allowing NFPROTO_INET for nft_(match/target)_validate(), but also
restrict the functions to classic iptables hooks.

Changes in v3:
  * clarify that upstream nft will not display such configuration properly and
    that the output was generated with a patched nft tool
  * remove example program from commit description and link to it instead
  * no code changes otherwise

Changes in v2:
  * restrict nft_(match/target)_validate() to classic iptables hooks
  * rewrite example program to use unmodified libnftnl

Fixes: d0009eff ("netfilter: nf_tables: validate NFPROTO_* family")
Link: https://lore.kernel.org/all/Zc1PfoWN38UuFJRI@calendula/T/#mc947262582c90fec044c7a3398cc92fac7afea72 [1]
Link: https://lore.kernel.org/all/20240220145509.53357-1-ignat@cloudflare.com/ [2]
Reported-by: Jordan Griege <jgriege@cloudflare.com>
Signed-off-by: Ignat Korchagin <ignat@cloudflare.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Pull ACPI fix from Rafael Wysocki:
 "Revert a recent EC driver change that introduced an unexpected and
  undesirable user-visible difference in behavior (Rafael Wysocki)"

* tag 'acpi-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI: EC: Use a spin lock without disabing interrupts"

Pull power management fix from Rafael Wysocki:
 "Fix a latent bug in the intel-pstate cpufreq driver that has been
  exposed by the recent schedutil governor changes (Doug Smythies)"

* tag 'pm-6.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: intel_pstate: fix pstate limits enforcement for adjust_perf call back

Pull spi fixes from Mark Brown:
 "There's two things here - the big one is a batch of fixes for the
  power management in the Cadence QuadSPI driver which had some serious
  issues with runtime PM and there's also a revert of one of the last
  batch of fixes for ppc4xx which has a dependency on -next but was in
  between two mainline fixes so the -next dependency got missed.

  The ppc4xx driver is not currently included in any defconfig and has
  dependencies that exclude it from allmodconfigs so none of the CI
  systems catch issues with it, hence the need for the earlier fixes
  series. There's some updates to the PowerPC configs to address this"

* tag 'spi-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
  spi: Drop mismerged fix
  spi: cadence-qspi: add system-wide suspend and resume callbacks
  spi: cadence-qspi: put runtime in runtime PM hooks names
  spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks
  spi: cadence-qspi: fix pointer reference in runtime PM hooks

Merge tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fixes from Mark Brown:
 "Two small fixes, one small update for the max5970 driver bringing the
  driver and DT binding documentation into sync plus a missed update to
  the patterns in MAINTAINERS after a DT binding YAML conversion"

* tag 'regulator-fix-v6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: max5970: Fix regulator child node name
  MAINTAINERS: repair entry for MICROCHIP MCP16502 PMIC DRIVER

Pull crypto fixes from Herbert Xu:
 "This fixes a regression in lskcipher and an out-of-bound access
  in arm64/neonbs"

* tag 'v6.8-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: arm64/neonbs - fix out-of-bounds access on short input
  crypto: lskcipher - Copy IV in lskcipher glue code always