- 10 Aug, 2023 40 commits
-
-
Laurent Pinchart authored
The VIDEO_IMX_MEDIA Kconfig symbol used to select helpers shared between independent drivers for different i.MX SoCs, and VIDEO_IMX_MEDIA then selects drivers specific to the i.MX5 and i.MX6. Now that i.MX7 and i.MX8 support has moved to drivers/media/ and doesn't depend on VIDEO_IMX_CSI, there's no need to have separate Kconfig options. Merge VIDEO_IMX_CSI into VIDEO_IMX_MEDIA. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Hans Verkuil <hverkuil-cisco@xs4all.nl>
-
Tomi Valkeinen authored
FPD-Link has an operating mode that used to be called "asynchronous" in the hardware documentation, but that has been changed to non-synchronous already quite a while back. The ub960 driver still had one instance of the old naming, so let's rename it. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Reviewed-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by:
Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by:
-
Tomi Valkeinen authored
Add support for FPD-Link non-sync mode with external clock. The only thing that needs to be added is the calculation for the clkout. Signed-off-by:
-
Tomi Valkeinen authored
Separate clkout calculations and register writes into two functions: ub953_calc_clkout_params and ub953_write_clkout_regs, and add a struct ub953_clkout_data that is used to store the clkout parameters. This simplifies the clkout management. Signed-off-by:
-
Tomi Valkeinen authored
Allow using FPD-Link in async mode. The driver handles it correctly, but the mode was blocked at probe time as there wasn't HW to test this with. Now the mode has been tested, and it works. Signed-off-by:
-
Tomi Valkeinen authored
Handle V4L2_MBUS_CSI2_NONCONTINUOUS_CLOCK flag to configure the CSI-2 RX continuous/non-continuous clock register. Signed-off-by:
-
Tomi Valkeinen authored
Use v4l2_fwnode_endpoint_parse() to parse the sink endpoint parameters. Signed-off-by:
-
Tomi Valkeinen authored
Use v4l2_fwnode_endpoint_parse() to parse the sink endpoint parameters. Signed-off-by:
-
Tomi Valkeinen authored
Use 'clock-noncontinuous' from DT to configure the continuous/non-continuous clock setting for the TX ports. Signed-off-by:
-
Tomi Valkeinen authored
Commit 1029939b ("media: v4l: async: Simplify async sub-device fwnode matching") recently changed how async sub-device matching works. This breaks the UB9x3 drivers, as they set the subdev.fwnode to an endpoint. Afaiu, the fix is simply to not set subdev.fwnode at all. Fixes: 1029939b ("media: v4l: async: Simplify async sub-device fwnode matching") Signed-off-by:
-
Hans Verkuil authored
This resolves this smatch error: drivers/media/firewire/firedtv-avc.c:602 avc_tuner_dsd() error: uninitialized symbol 'pos'. Signed-off-by: -
Hans Verkuil authored
This resolves a new smatch warning; drivers/media/usb/pvrusb2/pvrusb2-hdw.c:3293 pvr2_hdw_get_tuner_status() warn: inconsistent indenting Signed-off-by: -
Ruan Jinjie authored
There is no possible for platform_get_irq() to return 0, and the return value of platform_get_irq() is more sensible to show the error reason. Signed-off-by:
Ruan Jinjie <ruanjinjie@huawei.com> Signed-off-by:
-
Mariusz Bialonczyk authored
This commit is fixing the module in a way that trailing spaces at the end of the line in the debug/dmesg are gone. Signed-off-by:
Mariusz Bialonczyk <manio@skyboo.net> Signed-off-by:
-
Ruan Jinjie authored
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by:
-
Ruan Jinjie authored
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by:
Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Ruan Jinjie authored
There is no need to call the dev_err() function directly to print a custom message when handling an error from platform_get_irq() function as it is going to display an appropriate error message in case of a failure. Signed-off-by:
Andrzej Pietrasiewicz <andrzejtp2010@gmail.com> Signed-off-by:
-
Peng Fan authored
The node name should use hyphen(-), not underscore(_). Signed-off-by:
Peng Fan <peng.fan@nxp.com> Acked-by:
Conor Dooley <conor.dooley@microchip.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Example DTS should not have 'status' property. Signed-off-by:
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by:
Benjamin Mugnier <benjamin.mugnier@foss.st.com> Acked-by:
-
Yuanjun Gong authored
return an error code if mb86a16_read() gets an unexpected return value. Signed-off-by:
Yuanjun Gong <ruc_gongyuanjun@163.com> Signed-off-by:
-
Paul Kocialkowski authored
The doc mistakently mentions v4l2_frmsizeenum as the struct type passed to VIDIOC_ENUM_FRAMEINTERVALS, while it's actually v4l2_frmivalenum that should be used. Signed-off-by:
Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by:
-
Alain Volmat authored
Avoid calling s_stream on each subdev until reaching the sensor and instead call s_stream on the source subdev only (which will in turn do whatever needed to start the stream). Signed-off-by:
Alain Volmat <alain.volmat@foss.st.com> Reviewed-by:
Hugues FRUCHET <hugues.fruchet@foss.st.com> Signed-off-by:
-
Alain Volmat authored
Cascade the s_stream call to the source subdev whenever the bridge streaming is enable / disabled. Signed-off-by:
-
Paul Kocialkowski authored
The parts about fields that are returned typically comes after "Required fields" so it feels more consistent to name them "Returned fields". Signed-off-by:
-
Paul Kocialkowski authored
An extra whitespace after the asterisks prevents bold syntax parsing and results in the asterisks shown in the (non-bold) title. Signed-off-by:
-
Patrick Whewell authored
The firmware path for the sm8250 resources is incorrect. This fixes the path to address the firmware correctly. Signed-off-by:
Patrick Whewell <patrick.whewell@sightlineapplications.com> Signed-off-by:
Stanimir Varbanov <stanimir.k.varbanov@gmail.com> Signed-off-by:
-
Stephan Gerhold authored
Reserved memory can be either looked up using the generic function of_address_to_resource() or using the special of_reserved_mem_lookup(). The latter has the advantage that it ensures that the referenced memory region was really reserved and is not e.g. status = "disabled". of_reserved_mem also supports allocating reserved memory dynamically at boot time. This works only when using of_reserved_mem_lookup() since there won't be a fixed address in the device tree. Switch the code to use of_reserved_mem_lookup(). There is no functional difference for static reserved memory allocations. Signed-off-by:
Stephan Gerhold <stephan@gerhold.net> Signed-off-by:
-
Konrad Dybcio authored
Not all SC7180 devices ship with ChromeOS firmware. WoA devices use Android-like TZ, which uses PAS for image authentication. That requires the predefined virtual address ranges to be passed via scm calls. Define them to enable Venus on non-CrOS SC7180 devices. Signed-off-by:
Konrad Dybcio <konrad.dybcio@linaro.org> Signed-off-by:
-
Konrad Dybcio authored
This write was last present on msm-3.10, which means before HFI3XX platforms were introduced. Guard it with an appropriate if condition. Does not seem to have any adverse effects on at least SM8250. Signed-off-by:
-
Konrad Dybcio authored
Now that we have a way which is independent of the HFI version to set the correct fields in hfi_buffer_requirements, use it! Signed-off-by:
-
Konrad Dybcio authored
Currently we have macros to access these, but they don't provide a way to override the remapped fields. Replace the macros with actual get/set pairs to fix that. Reviewed-by:
Bryan O'Donoghue <bryan.odonoghue@linaro.org> Signed-off-by:
-
Konrad Dybcio authored
Replace the general IS_V6 checks with more specific VPU version checks. Reviewed-by:
-
Konrad Dybcio authored
This is not a matter of the host SoC, but the VPU chip in Venus. Fix it. Reviewed-by:
Vikash Garodia <quic_vgarodia@quicinc.com> Signed-off-by:
-
Konrad Dybcio authored
Replace the general IS_V6 checks with more specific VPU version checks. Signed-off-by:
-
Konrad Dybcio authored
Replace the general IS_V6 checks with more specific VPU version checks. Signed-off-by:
-
Konrad Dybcio authored
Replace the general IS_V6 checks with more specific VPU version checks. Signed-off-by:
-
Konrad Dybcio authored
Replace the general IS_V6 checks with more specific VPU version checks. Reviewed-by:
Dikshita Agarwal <quic_dikshita@quicinc.com> Signed-off-by:
-
Konrad Dybcio authored
Only IRIS2(_1) should enter the until-now-IS_V6() path and IRIS2_1 can be used instead of openly checking the number of VPP pipes. Use VPU version comparison in both of these cases instead. Signed-off-by:
-
Konrad Dybcio authored
The current assumption of IS_V6 is overgeneralized. Adjust the logic to take the VPU hardware version into account. Signed-off-by:
-
Konrad Dybcio authored
The current assumption of IS_V6 is overgeneralized. Adjust the logic to take the VPU hardware version into account. Signed-off-by:
-
