- 14 May, 2024 8 commits
-
-
Hans de Goede authored
Dell All In One (AIO) models released after 2017 use a backlight controller board connected to an UART. In DSDT this uart port will be defined as: Name (_HID, "DELL0501") Name (_CID, EisaId ("PNP0501") Instead of having a separate ACPI device with an UartSerialBusV2() resource to model the backlight-controller, which would be the standard way to do this. The acpi_quirk_skip_serdev_enumeration() has special handling for this and it will make the serial port code create a serdev controller device for the UART instead of a /dev/ttyS0 char-dev. It will also create a dell-uart-backlight driver platform device for this driver to bind too. This new kernel module contains 2 drivers for this: 1. A simple platform driver which creates the actual serdev device (with the serdev controller device as parent) 2. A serdev driver for the created serdev device which exports the backlight functionality uses a standard backlight class device. Reported-by:Roman Bogoyev <roman@computercheck.com.au> Tested-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Co-developed-by:
AceLan Kao <acelan.kao@canonical.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20240513144603.93874-2-hdegoede@redhat.com
-
Hans de Goede authored
The Xiaomi [Mi]Pad 2 has 3 menu / home / back capacitive touch-buttons on its bottom bezel. These are backlit by LEDs attached to a TPS61158 LED controller which is controlled by the "pwm_soc_lpss_2" PWM output. Create a LED class device for this, using the new input-events trigger as default trigger so that the buttons automatically light up on any input activity. Note alternatively a "leds_pwm" platform device could be created together with the necessary fwnode_s_ and a fwnode link to the PWM controller. There are 2 downsides to this approach: 1. The code would still need to pwm_get() the PWM controller to get/attach a fwnode for the PWM controller fwnode link and setting up the necessary fwnodes is non-trivial. So this would likely require more code then simply registering the LED class device directly. 2. Currently the leds_pwm driver and its devicetree bindings do not support limiting the maximum dutycycle to less then 100% which is required in this case (the leds_pwm driver can probably be extended to allow this). Reviewed-by:
Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> Signed-off-by:
-
Kate Hsuan authored
Xiaomi pad2 RGB LED fwnode updates: 1. Set "label" instead "function" to change the LED classdev name from "rgb:indicator" to "mipad2:rgb:indicator" to match the usual triplet name format for LED classdevs. 2. Set the trigger to the new "bq27520-0-charging-orange-full-green" powersupply trigger type for multi-color LEDs. 3. Put the fwnode link for red before green in ktd2026_node_group[] so that multi_index becomes "red green blue". Signed-off-by:
Kate Hsuan <hpa@redhat.com> Reviewed-by:
Andy Shevchenko <andy@kernel.org> Co-developed-by:
-
Hans de Goede authored
Pass a struct device pointer for x86_android_tablet_device to the board specific init() functions, so that these functions can use this for e.g. devm_*() functions. Reviewed-by:
-
Shyam Sundar S K authored
Add new ACPI ID AMDI000B used by upcoming AMD platform to the PMC supported list of devices. Signed-off-by:
Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Link: https://lore.kernel.org/r/20240510103946.877307-1-Shyam-sundar.S-k@amd.comSigned-off-by:
-
Shyam Sundar S K authored
Add new ACPI ID AMDI0105 used by upcoming AMD platform to the PMF supported list of devices. Signed-off-by:
-
Ben Fradella authored
The P2SB could get an invalid BAR from the BIOS, and that won't be fixed up until pcibios_assign_resources(), which is an fs_initcall(). - Move p2sb_fs_init() to an fs_initcall_sync(). This is still early enough to avoid a race with any dependent drivers. - Add a check for IORESOURCE_UNSET in p2sb_valid_resource() to catch unset BARs going forward. - Return error values from p2sb_fs_init() so that the 'initcall_debug' cmdline arg provides useful data. Signed-off-by:
Ben Fradella <bfradell@netapp.com> Acked-by:
Andy Shevchenko <andriy.shevchenko@linux.intel.com> Tested-by:
Klara Modin <klarasmodin@gmail.com> Reviewed-by:
Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com> Link: https://lore.kernel.org/r/20240509164905.41016-1-bcfradella@proton.meReviewed-by:
-
Weifeng Liu authored
Emits messages upon errors during probing of SAM. Hopefully this could provide useful context to user for the purpose of diagnosis when something miserable happen. Reviewed-by:
Maximilian Luz <luzmaximilian@gmail.com> Reviewed-by:
Weifeng Liu <weifeng.liu.z@gmail.com> Link: https://lore.kernel.org/r/20240505130800.2546640-3-weifeng.liu.z@gmail.comReviewed-by:
-
- 01 May, 2024 1 commit
-
-
Srinivas Pandruvada authored
SST SST-BF and SST-TF can be enabled/disabled per SST-PP level. So return a mask of all levels, where the feature is supported, instead of just for level 0. Since the return value returns all levels mask, not just level 0, update API version. Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Reviewed-by:
Zhang Rui <rui.zhang@intel.com> Link: https://lore.kernel.org/r/20240430221052.15825-1-srinivas.pandruvada@linux.intel.comReviewed-by:
-
- 29 Apr, 2024 31 commits
-
-
Szilard Fabian authored
As suggested by Documentation/filesystems/sysfs.rst sysfs_emit() should be used when formatting the value to be returned to user space. Signed-off-by:
Szilard Fabian <szfabian@bluemarch.art> Link: https://lore.kernel.org/r/20240428192548.113261-1-szfabian@bluemarch.artAcked-by:
Jonathan Woithe <jwoithe@just42.net> Reviewed-by:
Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Reviewed-by:
-
Srinivas Pandruvada authored
This version addresses issues with: - Support of SST BF/TF support per level - Increase number of CPUs displayed - Present all TRL levels for turbo-freq - Fix display for unsupported levels - Support multiple dies - Increase die count - Change CPU display for non compute domain Signed-off-by:
-
Srinivas Pandruvada authored
When there is no CPU in a power domain, display "None" instead of -1. Signed-off-by:
-
Srinivas Pandruvada authored
SST BF and TF can be enabled/disabled per level. So check the current level support from the mask of supported levels. This change from a single level to mask for info.sst_tf_support and info.sst_tf_support is indicated by API version change. Use as mask for API version above 2. In this way there is no change in behavior when running on older kernel with API version 2. Since the tool can support now API version 3, update the supported API version. Signed-off-by:
-
Srinivas Pandruvada authored
Currently max 128 CPUs can be displayed in the enable CPU list. Double the range. Since the size is big for stack allocation, change to static. Here changing to static is fine as these functions are called in serial. Signed-off-by:
-
Srinivas Pandruvada authored
For turbo-freq feature, only 3 levels of frequencies are displayed even if platform support more. Present all levels based on the CPU model. Signed-off-by:
-
Srinivas Pandruvada authored
During call to "intel-speed-select turbo-freq info" some junk values are reported for unsupported levels. Initialize the structure fact_info with 0s, so that isst_fact_display_information() will skip "0" values in the frequency. Signed-off-by:
-
Srinivas Pandruvada authored
When the die id is same as punit compute die ID, treat them same. In this case, when for_each_online_power_domain_in_set() is called, then don't loop for each punit in a die. Just loop for all punits in a package. Signed-off-by:
-
Srinivas Pandruvada authored
TPMI platform information supports up to 16 compute dies. So increase the range. Signed-off-by:
-
Xi Pardee authored
Update Lunar Lake lpm maps to include S0ix blocker information. Add Lunar Lake blocker maps to enable S0ix blocker show in pmc core debugfs. Signed-off-by:
Xi Pardee <xi.pardee@intel.com> Reviewed-by:
-
Xi Pardee authored
S0ix blocker counter is available in PWRM space. Add support to read and show S0ix blocker counter value through debugfs. Signed-off-by:
-
Xi Pardee authored
Update Lunar Lake signal status map. This status map has been updated since the map was merged. This patch updates the signal status map to the lastest version. Signed-off-by:
-
Srinivas Pandruvada authored
Add missing MODULE_DESCRIPTION() to ISST modules. Signed-off-by:
-
Srinivas Pandruvada authored
Add dev_fmt for formatting log messages. No functional impact is expected. Signed-off-by:
-
Srinivas Pandruvada authored
Use in_range() macro to simplify range check. No functional impact is expected. Signed-off-by:
-
Srinivas Pandruvada authored
A partitioned system has two different PCI VSEC devices per package. A non-partitioned device has only one PCI VSEC device per package. The current implementation only supports non partitioned systems. Each partition maps a set of power domains. Other than reading from different MMIO regions, there is no change in the SST functionality. The scope of SST control is still per power domain. Hence user space does not need to be aware of existence of partitions. With partitions, existing per package information defined using struct tpmi_sst_struct is enhanced to store information for both partitions. A mapping function map_partition_power_domain_id() is introduced, which maps to correct partition and index. This mapping function is called in get_instance() and isst_if_clos_assoc(), before indexing into tpmi_sst_struct->power_domain_info[]. The TPMI core platform info provides partition id and compute die ID mask for each partition. Use this information to order power domains, so that compute dies are presented before IO dies to match hardware defined compute die ID for each CPU. Signed-off-by:
-
Srinivas Pandruvada authored
Instead of long lines for assignment to tpmi_sst->power_domain_info, use a local variable pd_info and assign later. Also move the assignment of number of resources after the assignment of pd_info. No functional change is expected. Signed-off-by:
-
Srinivas Pandruvada authored
Define a local variable for &auxdev->dev and use to shorten length of lines. No functional change is done. Signed-off-by:
-
Srinivas Pandruvada authored
TPMI information header added additional fields in version 2. Some of the reserved fields in version 1 are used to define new fields. Parse new fields and export as part of platform data. These fields include: - PCI segment ID - Partition ID of the package: If a package is represented by more than one PCI device, then partition ID along with cdie_mask, describes the scope. For example to update get/set properties for a compute die, one of the PCI MMIO region is selected from the partition ID. - cdie_mask: Mask of all compute dies in this partition. Signed-off-by:
-
Srinivas Pandruvada authored
Align comments in kernel-doc for the struct intel_tpmi_plat_info. Signed-off-by:
-
Srinivas Pandruvada authored
Check the major version from TPMI information header and fail to load driver if the version is not supported. Signed-off-by:
-
Srinivas Pandruvada authored
When tpmi_process_info() returns error, fail to load the driver. This can happen if call to ioremap() returns error. Signed-off-by:
-
Andy Shevchenko authored
The modpost script is not happy WARNING: modpost: missing MODULE_DESCRIPTION() in drivers/platform/x86/classmate-laptop.o because there is a missing module description. Add it to the module. Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@holoscopio.com> Link: https://lore.kernel.org/r/20240423161108.2636958-1-andriy.shevchenko@linux.intel.comReviewed-by:
-
Hans de Goede authored
Add a new driver for the custom fast charging protocol found on Lenovo Yoga Tablet 2 1380F / 1380L models. Signed-off-by:
-
Armin Wolf authored
Add a new driver for the MSI WMI Platform interface. The underlying ACPI WMI interface supports many features, but so far only reading of fan speed sensors is implemented. The driver was reverse-engineered based on a user request to the lm-sensors project, see the github issue for details. The ACPI WMI interface used by this driver seems to use the same embedded controller interface as the msi-ec driver, but supports automatic discovery of supported machines without relying on a DMI whitelist. The driver was tested by the user who created the github issue. Closes: https://github.com/lm-sensors/lm-sensors/issues/475Signed-off-by:
Armin Wolf <W_Armin@gmx.de> Link: https://lore.kernel.org/r/20240421191145.3189-1-W_Armin@gmx.deReviewed-by:
-
Hans de Goede authored
acpi_send_ev is a bool and everywhere else true/false is used to set it. Replace the one instance using 0 with false. Suggested-by:
-
Mark Pearson authored
The hotkey combination Fn + G can be used to disable the trackpoint doubletap feature on Windows. Add matching functionality for Linux. Signed-off-by:
Mark Pearson <mpearson-lenovo@squebb.ca> Signed-off-by:
Vishnu Sankar <vishnuocv@gmail.com> Link: https://lore.kernel.org/r/20240417173124.9953-4-mpearson-lenovo@squebb.ca [hdegoede@redhat.com: Adjust for switch to sparse-keymap keymaps] [hdegoede@redhat.com: Do not log unknown event msg for doubletap when disabled] Tested-by:
-
Mark Pearson authored
New Lenovo platforms are adding the FN+N key to generate system debug details that support can use for collecting important details on any customer cases for Windows. Add the infrastructure so we can do the same on Linux by sending a KEY_VENDOR keycode to userspace. Signed-off-by:
Nitin Joshi <njoshi1@lenovo.com> Link: https://lore.kernel.org/r/20240417173124.9953-3-mpearson-lenovo@squebb.ca [hdegoede@redhat.com: Adjust for switch to sparse-keymap keymaps] Tested-by:
-
Mark Pearson authored
Lenovo trackpoints are adding the ability to generate a doubletap event. This handles the doubletap event and sends the KEY_PROG4 event to userspace. Despite the driver itself not using KEY_PROG1 - KEY_PROG3 this still uses KEY_PROG4 because of some keys being remapped to KEY_PROG1 - KEY_PROG3 by default by the upstream udev hwdb containing: evdev:name:ThinkPad Extra Buttons:dmi:bvn*:bvr*:bd*:svnLENOVO*:pn*:* ... KEYBOARD_KEY_17=prog1 KEYBOARD_KEY_1a=f20 # Microphone mute button KEYBOARD_KEY_45=bookmarks KEYBOARD_KEY_46=prog2 # Fn + PrtSc, on Windows: Snipping tool KEYBOARD_KEY_4a=prog3 # Fn + Right shift, on Windows: No idea Signed-off-by:
-
Mark Pearson authored
Modify how known_ev event is handled in preparation for adding new hkey event range. Signed-off-by:
-
Hans de Goede authored
The X1 carbon 2014 / 2nd gen's adaptive keyboard top row's "Home" mode, which is 1 of the 2 modes Linux supports, has clipping-tool and cloud buttons which so far are not mapped. I assume these were left as KEY_RESERVED because no suitable KEY_FOO codes were available when support was added. In the mean time we have gotten KEY_SELECTIVE_SCREENSHOT and this has been used for the clipping-tool function under Fn + PrtSc on more traditional ThinkPad keyboards already. Finding a KEY_FOO code for the cloud key is harder looking at the symbol it seems to refer to cloud-storage which made me think of file syncing, or file transfer which has let me to pick KEY_XFER for this. Note this is based on looking at a picture of the adaptive top row in Home mode and has not been tested on an actual adaptive keyboard. Tested-by:
-
