- 15 Oct, 2014 6 commits
-
-
Andrey Vagin authored
[ Upstream commit 9d186cac ] We don't know right timestamp for repaired skb-s. Wrong RTT estimations isn't good, because some congestion modules heavily depends on it. This patch adds the TCPCB_REPAIRED flag, which is included in TCPCB_RETRANS. Thanks to Eric for the advice how to fix this issue. This patch fixes the warning: [ 879.562947] WARNING: CPU: 0 PID: 2825 at net/ipv4/tcp_input.c:3078 tcp_ack+0x11f5/0x1380() [ 879.567253] CPU: 0 PID: 2825 Comm: socket-tcpbuf-l Not tainted 3.16.0-next-20140811 #1 [ 879.567829] Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011 [ 879.568177] 0000000000000000 00000000c532680c ffff880039643d00 ffffffff817aa2d2 [ 879.568776] 0000000000000000 ffff880039643d38 ffffffff8109afbd ffff880039d6ba80 [ 879.569386] ffff88003a449800 000000002983d6bd 0000000000000000 000000002983d6bc [ 879.569982] Call Trace: [ 879.570264] [<ffffffff817aa2d2>] dump_stack+0x4d/0x66 [ 879.570599] [<ffffffff8109afbd>] warn_slowpath_common+0x7d/0xa0 [ 879.570935] [<ffffffff8109b0ea>] warn_slowpath_null+0x1a/0x20 [ 879.571292] [<ffffffff816d0a05>] tcp_ack+0x11f5/0x1380 [ 879.571614] [<ffffffff816d10bd>] tcp_rcv_established+0x1ed/0x710 [ 879.571958] [<ffffffff816dc9da>] tcp_v4_do_rcv+0x10a/0x370 [ 879.572315] [<ffffffff81657459>] release_sock+0x89/0x1d0 [ 879.572642] [<ffffffff816c81a0>] do_tcp_setsockopt.isra.36+0x120/0x860 [ 879.573000] [<ffffffff8110a52e>] ? rcu_read_lock_held+0x6e/0x80 [ 879.573352] [<ffffffff816c8912>] tcp_setsockopt+0x32/0x40 [ 879.573678] [<ffffffff81654ac4>] sock_common_setsockopt+0x14/0x20 [ 879.574031] [<ffffffff816537b0>] SyS_setsockopt+0x80/0xf0 [ 879.574393] [<ffffffff817b40a9>] system_call_fastpath+0x16/0x1b [ 879.574730] ---[ end trace a17cbc38eb8c5c00 ]--- v2: moving setting of skb->when for repaired skb-s in tcp_write_xmit, where it's set for other skb-s. Fixes: 431a9124 ("tcp: timestamp SYN+DATA messages") Fixes: 740b0f18 ("tcp: switch rtt estimations to usec resolution") Cc: Eric Dumazet <edumazet@google.com> Cc: Pavel Emelyanov <xemul@parallels.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by:
Andrey Vagin <avagin@openvz.org> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David S. Miller authored
[ Upstream commit 5e3c516b ] This reverts commit a188a54d. It causes crashes ==================== [ 80.643286] BUG: unable to handle kernel NULL pointer dereference at 0000000000000878 [ 80.670103] IP: [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 80.691289] PGD 22c102067 PUD 235bf0067 PMD 0 [ 80.706611] Oops: 0002 [#1] SMP [ 80.717836] Modules linked in: macvlan nfsd lockd nfs_acl exportfs auth_rpcgss sunrpc oid_registry ioatdma ixgbe(-) mdio igb dca [ 80.757935] CPU: 37 PID: 6724 Comm: rmmod Not tainted 3.16.0-net-next-08-12-2014-FCoE+ #1 [ 80.785688] Hardware name: Intel Corporation S2600CO/S2600CO, BIOS SE5C600.86B.02.03.0003.041920141333 04/19/2014 [ 80.820310] task: ffff880235a9eae0 ti: ffff88022e844000 task.ti: ffff88022e844000 [ 80.845770] RIP: 0010:[<ffffffff810832e4>] [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 80.875326] RSP: 0018:ffff88022e847b28 EFLAGS: 00010046 [ 80.893251] RAX: 0000000000037a6a RBX: 0000000000000878 RCX: 0000000000000000 [ 80.917187] RDX: ffff880235a9eae0 RSI: 0000000000000001 RDI: ffffffff810832db [ 80.941125] RBP: ffff88022e847b58 R08: 0000000000000000 R09: 0000000000000000 [ 80.965056] R10: 0000000000000001 R11: 0000000000000001 R12: ffff88022e847b70 [ 80.988994] R13: 0000000000000000 R14: ffff88022e847be8 R15: ffffffff81ebe440 [ 81.012929] FS: 00007fab90b07700(0000) GS:ffff88043f7a0000(0000) knlGS:0000000000000000 [ 81.040400] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 81.059757] CR2: 0000000000000878 CR3: 0000000235a42000 CR4: 00000000001407e0 [ 81.083689] Stack: [ 81.090739] ffff880235a9eae0 0000000000000878 ffff88022e847b70 0000000000000000 [ 81.116253] ffff88022e847be8 ffffffff81ebe440 ffff88022e847b98 ffffffff810847f1 [ 81.141766] ffff88022e847b78 0000000000000286 ffff880234200000 0000000000000000 [ 81.167282] Call Trace: [ 81.175768] [<ffffffff810847f1>] __cancel_work_timer+0x31/0x170 [ 81.195985] [<ffffffff8108494b>] cancel_work_sync+0xb/0x10 [ 81.214769] [<ffffffffa015ae68>] macvlan_port_destroy+0x28/0x60 [macvlan] [ 81.237844] [<ffffffffa015b930>] macvlan_uninit+0x40/0x50 [macvlan] [ 81.259209] [<ffffffff816bf6e2>] rollback_registered_many+0x1a2/0x2c0 [ 81.281140] [<ffffffff816bf81a>] unregister_netdevice_many+0x1a/0xb0 [ 81.302786] [<ffffffffa015a4ff>] macvlan_device_event+0x1ef/0x240 [macvlan] [ 81.326439] [<ffffffff8108a13d>] notifier_call_chain+0x4d/0x70 [ 81.346366] [<ffffffff8108a201>] raw_notifier_call_chain+0x11/0x20 [ 81.367439] [<ffffffff816bf25b>] call_netdevice_notifiers_info+0x3b/0x70 [ 81.390228] [<ffffffff816bf2a1>] call_netdevice_notifiers+0x11/0x20 [ 81.411587] [<ffffffff816bf6bd>] rollback_registered_many+0x17d/0x2c0 [ 81.433518] [<ffffffff816bf925>] unregister_netdevice_queue+0x75/0x110 [ 81.455735] [<ffffffff816bfb2b>] unregister_netdev+0x1b/0x30 [ 81.475094] [<ffffffffa0039b50>] ixgbe_remove+0x170/0x1d0 [ixgbe] [ 81.495886] [<ffffffff813512a2>] pci_device_remove+0x32/0x60 [ 81.515246] [<ffffffff814c75c4>] __device_release_driver+0x64/0xd0 [ 81.536321] [<ffffffff814c76f8>] driver_detach+0xc8/0xd0 [ 81.554530] [<ffffffff814c656e>] bus_remove_driver+0x4e/0xa0 [ 81.573888] [<ffffffff814c828b>] driver_unregister+0x2b/0x60 [ 81.593246] [<ffffffff8135143e>] pci_unregister_driver+0x1e/0xa0 [ 81.613749] [<ffffffffa005db18>] ixgbe_exit_module+0x1c/0x2e [ixgbe] [ 81.635401] [<ffffffff810e738b>] SyS_delete_module+0x15b/0x1e0 [ 81.655334] [<ffffffff8187a395>] ? sysret_check+0x22/0x5d [ 81.673833] [<ffffffff810abd2d>] ? trace_hardirqs_on_caller+0x11d/0x1e0 [ 81.696339] [<ffffffff8132bfde>] ? trace_hardirqs_on_thunk+0x3a/0x3f [ 81.717985] [<ffffffff8187a369>] system_call_fastpath+0x16/0x1b [ 81.738199] Code: 00 48 83 3d 6e bb da 00 00 48 89 c2 0f 84 67 01 00 00 fa 66 0f 1f 44 00 00 49 89 14 24 e8 b5 4b 02 00 45 84 ed 0f 85 ac 00 00 00 <f0> 0f ba 2b 00 72 1d 31 c0 48 8b 5d d8 4c 8b 65 e0 4c 8b 6d e8 [ 81.807026] RIP [<ffffffff810832e4>] try_to_grab_pending+0x64/0x1f0 [ 81.828468] RSP <ffff88022e847b28> [ 81.840384] CR2: 0000000000000878 [ 81.851731] ---[ end trace 9f6c7232e3464e11 ]--- ==================== This bug could be triggered by these steps: modprobe ixgbe ; modprobe macvlan ip link add link p96p1 address 00:1B:21:6E:06:00 macvlan0 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:01 macvlan1 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:02 macvlan2 type macvlan ip link add link p96p1 address 00:1B:21:6E:06:03 macvlan3 type macvlan rmmod ixgbe Reported-by:
"Keller, Jacob E" <jacob.e.keller@intel.com> Signed-off-by:
-
Stanislaw Gruszka authored
[ Upstream commit 10545937 ] On IOMMU systems DMA mapping can fail, we need to check for that possibility. Signed-off-by:
Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by:
-
Vlad Yasevich authored
[ Upstream commit 0d5501c1 ] Currently the functionality to untag traffic on input resides as part of the vlan module and is build only when VLAN support is enabled in the kernel. When VLAN is disabled, the function vlan_untag() turns into a stub and doesn't really untag the packets. This seems to create an interesting interaction between VMs supporting checksum offloading and some network drivers. There are some drivers that do not allow the user to change tx-vlan-offload feature of the driver. These drivers also seem to assume that any VLAN-tagged traffic they transmit will have the vlan information in the vlan_tci and not in the vlan header already in the skb. When transmitting skbs that already have tagged data with partial checksum set, the checksum doesn't appear to be updated correctly by the card thus resulting in a failure to establish TCP connections. The following is a packet trace taken on the receiver where a sender is a VM with a VLAN configued. The host VM is running on doest not have VLAN support and the outging interface on the host is tg3: 10:12:43.503055 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27243, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x48d9), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294837885 ecr 0,nop,wscale 7], length 0 10:12:44.505556 52:54:00:ae:42:3f > 28:d2:44:7d:c2:de, ethertype 802.1Q (0x8100), length 78: vlan 100, p 0, ethertype IPv4, (tos 0x0, ttl 64, id 27244, offset 0, flags [DF], proto TCP (6), length 60) 10.0.100.1.58545 > 10.0.100.10.ircu-2: Flags [S], cksum 0xdc39 (incorrect -> 0x44ee), seq 1069378582, win 29200, options [mss 1460,sackOK,TS val 4294838888 ecr 0,nop,wscale 7], length 0 This connection finally times out. I've only access to the TG3 hardware in this configuration thus have only tested this with TG3 driver. There are a lot of other drivers that do not permit user changes to vlan acceleration features, and I don't know if they all suffere from a similar issue. The patch attempt to fix this another way. It moves the vlan header stipping code out of the vlan module and always builds it into the kernel network core. This way, even if vlan is not supported on a virtualizatoin host, the virtual machines running on top of such host will still work with VLANs enabled. CC: Patrick McHardy <kaber@trash.net> CC: Nithin Nayak Sujir <nsujir@broadcom.com> CC: Michael Chan <mchan@broadcom.com> CC: Jiri Pirko <jiri@resnulli.us> Signed-off-by:
Vladislav Yasevich <vyasevic@redhat.com> Acked-by:
Jiri Pirko <jiri@resnulli.us> Signed-off-by:
-
Jiri Benc authored
[ Upstream commit 945a3676 ] Commit 1d8faf48 ("net/core: Add VF link state control") added new attribute to IFLA_VF_INFO group in rtnl_fill_ifinfo but did not adjust size of the allocated memory in if_nlmsg_size/rtnl_vfinfo_size. As the result, we may trigger warnings in rtnl_getlink and similar functions when many VF links are enabled, as the information does not fit into the allocated skb. Fixes: 1d8faf48 ("net/core: Add VF link state control") Reported-by:
Yulong Pei <ypei@redhat.com> Signed-off-by:
Jiri Benc <jbenc@redhat.com> Signed-off-by:
-
Daniel Borkmann authored
[ Upstream commit 4e48ed88 ] netlink doesn't set any network header offset thus when the skb is being passed to tap devices via dev_queue_xmit_nit(), it emits klog false positives due to it being unset like: ... [ 124.990397] protocol 0000 is buggy, dev nlmon0 [ 124.990411] protocol 0000 is buggy, dev nlmon0 ... So just reset the network header before passing to the device; for packet sockets that just means nothing will change - mac and net offset hold the same value just as before. Reported-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
Daniel Borkmann <dborkman@redhat.com> Signed-off-by:
-
- 09 Oct, 2014 27 commits
-
-
Greg Kroah-Hartman authored
-
Andrew Hunter authored
commit d78c9300 upstream. timeval_to_jiffies tried to round a timeval up to an integral number of jiffies, but the logic for doing so was incorrect: intervals corresponding to exactly N jiffies would become N+1. This manifested itself particularly repeatedly stopping/starting an itimer: setitimer(ITIMER_PROF, &val, NULL); setitimer(ITIMER_PROF, NULL, &val); would add a full tick to val, _even if it was exactly representable in terms of jiffies_ (say, the result of a previous rounding.) Doing this repeatedly would cause unbounded growth in val. So fix the math. Here's what was wrong with the conversion: we essentially computed (eliding seconds) jiffies = usec * (NSEC_PER_USEC/TICK_NSEC) by using scaling arithmetic, which took the best approximation of NSEC_PER_USEC/TICK_NSEC with denominator of 2^USEC_JIFFIE_SC = x/(2^USEC_JIFFIE_SC), and computed: jiffies = (usec * x) >> USEC_JIFFIE_SC and rounded this calculation up in the intermediate form (since we can't necessarily exactly represent TICK_NSEC in usec.) But the scaling arithmetic is a (very slight) *over*approximation of the true value; that is, instead of dividing by (1 usec/ 1 jiffie), we effectively divided by (1 usec/1 jiffie)-epsilon (rounding down). This would normally be fine, but we want to round timeouts up, and we did so by adding 2^USEC_JIFFIE_SC - 1 before the shift; this would be fine if our division was exact, but dividing this by the slightly smaller factor was equivalent to adding just _over_ 1 to the final result (instead of just _under_ 1, as desired.) In particular, with HZ=1000, we consistently computed that 10000 usec was 11 jiffies; the same was true for any exact multiple of TICK_NSEC. We could possibly still round in the intermediate form, adding something less than 2^USEC_JIFFIE_SC - 1, but easier still is to convert usec->nsec, round in nanoseconds, and then convert using time*spec*_to_jiffies. This adds one constant multiplication, and is not observably slower in microbenchmarks on recent x86 hardware. Tested: the following program: int main() { struct itimerval zero = {{0, 0}, {0, 0}}; /* Initially set to 10 ms. */ struct itimerval initial = zero; initial.it_interval.tv_usec = 10000; setitimer(ITIMER_PROF, &initial, NULL); /* Save and restore several times. */ for (size_t i = 0; i < 10; ++i) { struct itimerval prev; setitimer(ITIMER_PROF, &zero, &prev); /* on old kernels, this goes up by TICK_USEC every iteration */ printf("previous value: %ld %ld %ld %ld\n", prev.it_interval.tv_sec, prev.it_interval.tv_usec, prev.it_value.tv_sec, prev.it_value.tv_usec); setitimer(ITIMER_PROF, &prev, NULL); } return 0; } Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Paul Turner <pjt@google.com> Cc: Richard Cochran <richardcochran@gmail.com> Cc: Prarit Bhargava <prarit@redhat.com> Reviewed-by:
Paul Turner <pjt@google.com> Reported-by:
Aaron Jacobs <jacobsa@google.com> Signed-off-by:
Andrew Hunter <ahh@google.com> [jstultz: Tweaked to apply to 3.17-rc] Signed-off-by:
John Stultz <john.stultz@linaro.org> [bwh: Backported to 3.16: adjust filename] Signed-off-by:
Ben Hutchings <ben@decadent.org.uk> Signed-off-by:
-
Hans Verkuil authored
commit 58d75f4b upstream. The recent conversion of saa7134 to vb2 unconvered a poll() bug that broke the teletext applications alevt and mtt. These applications expect that calling poll() without having called VIDIOC_STREAMON will cause poll() to return POLLERR. That did not happen in vb2. This patch fixes that behavior. It also fixes what should happen when poll() is called when STREAMON is called but no buffers have been queued. In that case poll() will also return POLLERR, but only for capture queues since output queues will always return POLLOUT anyway in that situation. This brings the vb2 behavior in line with the old videobuf behavior. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Acked-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Mel Gorman authored
commit abc40bd2 upstream. This patch reverts 1ba6e0b5 ("mm: numa: split_huge_page: transfer the NUMA type from the pmd to the pte"). If a huge page is being split due a protection change and the tail will be in a PROT_NONE vma then NUMA hinting PTEs are temporarily created in the protected VMA. VM_RW|VM_PROTNONE |-----------------| ^ split here In the specific case above, it should get fixed up by change_pte_range() but there is a window of opportunity for weirdness to happen. Similarly, if a huge page is shrunk and split during a protection update but before pmd_numa is cleared then a pte_numa can be left behind. Instead of adding complexity trying to deal with the case, this patch will not mark PTEs NUMA when splitting a huge page. NUMA hinting faults will not be triggered which is marginal in comparison to the complexity in dealing with the corner cases during THP split. Signed-off-by:
Mel Gorman <mgorman@suse.de> Acked-by:
Rik van Riel <riel@redhat.com> Acked-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Waiman Long authored
commit f8303c25 upstream. In __split_huge_page_map(), the check for page_mapcount(page) is invariant within the for loop. Because of the fact that the macro is implemented using atomic_read(), the redundant check cannot be optimized away by the compiler leading to unnecessary read to the page structure. This patch moves the invariant bug check out of the loop so that it will be done only once. On a 3.16-rc1 based kernel, the execution time of a microbenchmark that broke up 1000 transparent huge pages using munmap() had an execution time of 38,245us and 38,548us with and without the patch respectively. The performance gain is about 1%. Signed-off-by:
Waiman Long <Waiman.Long@hp.com> Acked-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Bruno Prémont authored
commit 86fd887b upstream. Commit 20cde694 ("x86, ia64: Move EFI_FB vga_default_device() initialization to pci_vga_fixup()") moved boot video device detection from efifb to x86 and ia64 pci/fixup.c. For dual-GPU Apple computers above change represents a regression as code in efifb did forcefully override vga_default_device while the merge did not (vgaarb happens prior to PCI fixup). To improve on initial device selection by vgaarb (it cannot know if PCI device not behind bridges see/decode legacy VGA I/O or not), move the screen_info based check from pci_video_fixup() to vgaarb's init function and use it to refine/override decision taken while adding the individual PCI VGA devices. This way PCI fixup has no reason to adjust vga_default_device anymore but can depend on its value for flagging shadowed VBIOS. This has the nice benefit of removing duplicated code but does introduce a #if defined() block in vgaarb. Not all architectures have screen_info and would cause compile to fail without it. Link: https://bugzilla.kernel.org/show_bug.cgi?id=84461Reported-and-Tested-By:
Andreas Noever <andreas.noever@gmail.com> Signed-off-by:
Bruno Prémont <bonbons@linux-vserver.org> Signed-off-by:
Bjorn Helgaas <bhelgaas@google.com> CC: Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Bruno Prémont authored
commit 20cde694 upstream. Commit b4aa0163 ("efifb: Implement vga_default_device() (v2)") added efifb vga_default_device() so EFI systems that do not load shadow VBIOS or setup VGA get proper value for boot_vga PCI sysfs attribute on the corresponding PCI device. Xorg doesn't detect devices when boot_vga=0, e.g., on some EFI systems such as MacBookAir2,1. Xorg detects the GPU and finds the DRI device but then bails out with "no devices detected". Note: When vga_default_device() is set boot_vga PCI sysfs attribute reflects its state. When unset this attribute is 1 whenever IORESOURCE_ROM_SHADOW flag is set. With introduction of sysfb/simplefb/simpledrm efifb is getting obsolete while having native drivers for the GPU also makes selecting sysfb/efifb optional. Remove the efifb implementation of vga_default_device() and initialize vgaarb's vga_default_device() with the PCI GPU that matches boot screen_info in pci_fixup_video(). [bhelgaas: remove unused "dev" in efifb_setup()] Fixes: b4aa0163 ("efifb: Implement vga_default_device() (v2)") Tested-by:
Anibal Francisco Martinez Cortina <linuxkid.zeuz@gmail.com> Signed-off-by:
Matthew Garrett <matthew.garrett@nebula.com> Signed-off-by:
-
Hans de Goede authored
commit a79e5bc5 upstream. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
commit a9c54caa upstream. There are a large numbers of issues with ASM1051 devices in uas mode: 1) They do not support REPORT SUPPORTED OPERATION CODES 2) They use out of spec 8 byte status iu-s when they have no sense data, switching to normal 16 byte status iu-s when they do have sense data. 3) They hang / crash when combined with some disks, e.g. a Crucial M500 ssd. 4) They hang / crash when stressed (through e.g. sg_reset --bus) with disks with which then normally do work (once 1 & 2 are worked around). Where as in BOT mode they appear to work fine, so the best way forward with these devices is to just blacklist them for uas usage. Unfortunately this is easier said then done. as older versions of the ASM1053 (which works fine) use the same usb-id as the ASM1051. When connected over USB-3 the 2 can be told apart by the number of streams they support. So this patch adds some less then pretty code to disable uas for the ASM1051. When connected over USB-2, simply disable uas alltogether for devices with the shared usb-id. Cc: stable@vger.kernel.org # 3.16 Signed-off-by:
-
Hans de Goede authored
commit 43508be5 upstream. So that an user who wants to use uas can see why he is not getting uas. Also move the check down so that we don't warn if there are other reasons why uas cannot work. Signed-off-by:
-
Hans de Goede authored
commit cc4deafc upstream. Don't complain about controllers without sg support if there are other reasons why uas cannot be used anyways. Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 24607f11 upstream. Commit 651e22f2 "ring-buffer: Always reset iterator to reader page" fixed one bug but in the process caused another one. The reset is to update the header page, but that fix also changed the way the cached reads were updated. The cache reads are used to test if an iterator needs to be updated or not. A ring buffer iterator, when created, disables writes to the ring buffer but does not stop other readers or consuming reads from happening. Although all readers are synchronized via a lock, they are only synchronized when in the ring buffer functions. Those functions may be called by any number of readers. The iterator continues down when its not interrupted by a consuming reader. If a consuming read occurs, the iterator starts from the beginning of the buffer. The way the iterator sees that a consuming read has happened since its last read is by checking the reader "cache". The cache holds the last counts of the read and the reader page itself. Commit 651e22f2 changed what was saved by the cache_read when the rb_iter_reset() occurred, making the iterator never match the cache. Then if the iterator calls rb_iter_reset(), it will go into an infinite loop by checking if the cache doesn't match, doing the reset and retrying, just to see that the cache still doesn't match! Which should never happen as the reset is suppose to set the cache to the current value and there's locks that keep a consuming reader from having access to the data. Fixes: 651e22f2 "ring-buffer: Always reset iterator to reader page" Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
Josh Triplett authored
commit 62b4d204 upstream. commit 03b8c7b6 ("futex: Allow architectures to skip futex_atomic_cmpxchg_inatomic() test") added the HAVE_FUTEX_CMPXCHG symbol right below FUTEX. This placed it right in the middle of the options for the EXPERT menu. However, HAVE_FUTEX_CMPXCHG does not depend on EXPERT or FUTEX, so Kconfig stops placing items in the EXPERT menu, and displays the remaining several EXPERT items (starting with EPOLL) directly in the General Setup menu. Since both users of HAVE_FUTEX_CMPXCHG only select it "if FUTEX", make HAVE_FUTEX_CMPXCHG itself depend on FUTEX. With this change, the subsequent items display as part of the EXPERT menu again; the EMBEDDED menu now appears as the next top-level item in the General Setup menu, which makes General Setup much shorter and more usable. Signed-off-by:
Josh Triplett <josh@joshtriplett.org> Acked-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Steve French authored
commit 19e81573 upstream. Changeset eb85d94b introduced a problem where if a cifs open fails during query info of a file we will still try to close the file (happens with certain types of reparse points) even though the file handle is not valid. In addition for SMB2/SMB3 we were not mapping the return code returned by Windows when trying to open a file (like a Windows NFS symlink) which is a reparse point. Signed-off-by:
Steve French <smfrench@gmail.com> Reviewed-by:
Pavel Shilovsky <pshilovsky@samba.org> Signed-off-by:
-
Chris Wilson authored
commit 91e56499 upstream. As we use WC updates of the PTE, we are responsible for notifying the hardware when to flush its TLBs. Do so after we zap all the PTEs before suspend (and the BIOS tries to read our GTT). Fixes a regression from commit 828c7908 Author: Ben Widawsky <benjamin.widawsky@intel.com> Date: Wed Oct 16 09:21:30 2013 -0700 drm/i915: Disable GGTT PTEs on GEN6+ suspend that survived and continue to cause harm even after commit e568af1c Author: Daniel Vetter <daniel.vetter@ffwll.ch> Date: Wed Mar 26 20:08:20 2014 +0100 drm/i915: Undo gtt scratch pte unmapping again v2: Trivial rebase. v3: Fixes requires pointer dances. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=82340 Tested-by: ming.yao@intel.com Signed-off-by:
Chris Wilson <chris@chris-wilson.co.uk> Cc: Takashi Iwai <tiwai@suse.de> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Todd Previte <tprevite@gmail.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Jani Nikula <jani.nikula@intel.com> Signed-off-by:
-
NeilBrown authored
commit 8e0e99ba upstream. It has come to my attention (thanks Martin) that 'discard_zeroes_data' is only a hint. Some devices in some cases don't do what it says on the label. The use of DISCARD in RAID5 depends on reads from discarded regions being predictably zero. If a write to a previously discarded region performs a read-modify-write cycle it assumes that the parity block was consistent with the data blocks. If all were zero, this would be the case. If some are and some aren't this would not be the case. This could lead to data corruption after a device failure when data needs to be reconstructed from the parity. As we cannot trust 'discard_zeroes_data', ignore it by default and so disallow DISCARD on all raid4/5/6 arrays. As many devices are trustworthy, and as there are benefits to using DISCARD, add a module parameter to over-ride this caution and cause DISCARD to work if discard_zeroes_data is set. If a site want to enable DISCARD on some arrays but not on others they should select DISCARD support at the filesystem level, and set the raid456 module parameter. raid456.devices_handle_discard_safely=Y As this is a data-safety issue, I believe this patch is suitable for -stable. DISCARD support for RAID456 was added in 3.7 Cc: Shaohua Li <shli@kernel.org> Cc: "Martin K. Petersen" <martin.petersen@oracle.com> Cc: Mike Snitzer <snitzer@redhat.com> Cc: Heinz Mauelshagen <heinzm@redhat.com> Acked-by:
Martin K. Petersen <martin.petersen@oracle.com> Acked-by:
Mike Snitzer <snitzer@redhat.com> Fixes: 620125f2Signed-off-by:
NeilBrown <neilb@suse.de> Signed-off-by:
-
Rafael J. Wysocki authored
commit e65b5ddb upstream. Fix the following bug introduced by commit 8fec051e (cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}) that forgot to move the spin_lock() in pcc_cpufreq_target() past cpufreq_freq_transition_begin() which calls wait_event(): BUG: sleeping function called from invalid context at drivers/cpufreq/cpufreq.c:370 in_atomic(): 1, irqs_disabled(): 0, pid: 2636, name: modprobe Preemption disabled at:[<ffffffffa04d74d7>] pcc_cpufreq_target+0x27/0x200 [pcc_cpufreq] [ 51.025044] CPU: 57 PID: 2636 Comm: modprobe Tainted: G E 3.17.0-default #7 Hardware name: Hewlett-Packard ProLiant DL980 G7, BIOS P66 07/07/2010 00000000ffffffff ffff88026c46b828 ffffffff81589dbd 0000000000000000 ffff880037978090 ffff88026c46b848 ffffffff8108e1df ffff880037978090 0000000000000000 ffff88026c46b878 ffffffff8108e298 ffff88026d73ec00 Call Trace: [<ffffffff81589dbd>] dump_stack+0x4d/0x90 [<ffffffff8108e1df>] ___might_sleep+0x10f/0x180 [<ffffffff8108e298>] __might_sleep+0x48/0xd0 [<ffffffff8145b905>] cpufreq_freq_transition_begin+0x75/0x140 drivers/cpufreq/cpufreq.c:370 wait_event(policy->transition_wait, !policy->transition_ongoing); [<ffffffff8108fc99>] ? preempt_count_add+0xb9/0xc0 [<ffffffffa04d7513>] pcc_cpufreq_target+0x63/0x200 [pcc_cpufreq] drivers/cpufreq/pcc-cpufreq.c:207 spin_lock(&pcc_lock); [<ffffffff810e0d0f>] ? update_ts_time_stats+0x7f/0xb0 [<ffffffff8145be55>] __cpufreq_driver_target+0x85/0x170 [<ffffffff8145e4c8>] od_check_cpu+0xa8/0xb0 [<ffffffff8145ef10>] dbs_check_cpu+0x180/0x1d0 [<ffffffff8145f310>] cpufreq_governor_dbs+0x3b0/0x720 [<ffffffff8145ebe3>] od_cpufreq_governor_dbs+0x33/0xe0 [<ffffffff814593d9>] __cpufreq_governor+0xa9/0x210 [<ffffffff81459fb2>] cpufreq_set_policy+0x1e2/0x2e0 [<ffffffff8145a6cc>] cpufreq_init_policy+0x8c/0x110 [<ffffffff8145c9a0>] ? cpufreq_update_policy+0x1b0/0x1b0 [<ffffffff8108fb99>] ? preempt_count_sub+0xb9/0x100 [<ffffffff8145c6c6>] __cpufreq_add_dev+0x596/0x6b0 [<ffffffffa016c608>] ? pcc_cpufreq_probe+0x4b4/0x4b4 [pcc_cpufreq] [<ffffffff8145c7ee>] cpufreq_add_dev+0xe/0x10 [<ffffffff81408e81>] subsys_interface_register+0xc1/0xf0 [<ffffffff8108fb99>] ? preempt_count_sub+0xb9/0x100 [<ffffffff8145b3d7>] cpufreq_register_driver+0x117/0x2a0 [<ffffffffa016c65d>] pcc_cpufreq_init+0x55/0x9f8 [pcc_cpufreq] [<ffffffffa016c608>] ? pcc_cpufreq_probe+0x4b4/0x4b4 [pcc_cpufreq] [<ffffffff81000298>] do_one_initcall+0xc8/0x1f0 [<ffffffff811a731d>] ? __vunmap+0x9d/0x100 [<ffffffff810eb9a0>] do_init_module+0x30/0x1b0 [<ffffffff810edfa6>] load_module+0x686/0x710 [<ffffffff810ebb20>] ? do_init_module+0x1b0/0x1b0 [<ffffffff810ee1db>] SyS_init_module+0x9b/0xc0 [<ffffffff8158f7a9>] system_call_fastpath+0x16/0x1b Fixes: 8fec051e (cpufreq: Convert existing drivers to use cpufreq_freq_transition_{begin|end}) Reported-and-tested-by:
Mike Galbraith <umgwanakikbuti@gmail.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit d62dbf77 upstream. When building this driver as a module, we get a helpful warning about the return type: drivers/cpufreq/integrator-cpufreq.c:232:2: warning: initialization from incompatible pointer type .remove = __exit_p(integrator_cpufreq_remove), If the remove callback returns void, the caller gets an undefined value as it expects an integer to be returned. This fixes the problem by passing down the value from cpufreq_unregister_driver. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Aaron Lu authored
commit 77076c7a upstream. Some of the Thinkpads' firmware will issue a backlight change request through i915 operation region unconditionally on AC plug/unplug, the backlight level used is arbitrary and thus should be ignored. This is handled by commit 0b9f7d93 (ACPI / i915: ignore firmware requests for backlight change). Then there is a Dell laptop whose vendor backlight interface also makes use of operation region to change backlight level and with the above commit, that interface no long works. The condition used to ignore the backlight change request from firmware is thus changed to: if the vendor backlight interface is not in use and the ACPI backlight interface is broken, we ignore the requests; oterwise, we keep processing them. Fixes: 0b9f7d93 (ACPI / i915: ignore firmware requests for backlight change) Link: https://lkml.org/lkml/2014/9/23/854Reported-and-tested-by:
Pali Rohár <pali.rohar@gmail.com> Signed-off-by:
Aaron Lu <aaron.lu@intel.com> Acked-by:
Daniel Vetter <daniel@ffwll.ch> Signed-off-by:
-
Alexandru M Stan authored
commit cf27020d upstream. i2cdetect -q was broken (everything was a false positive, and no transfers were actually being sent over i2c). The way it works is by sending a 0 length write request and checking for NACK. This patch fixes the 0 length writes and actually sends them. Reported-by:
Doug Anderson <dianders@chromium.org> Signed-off-by:
Alexandru M Stan <amstan@chromium.org> Tested-by:
Max Schwarz <max.schwarz@online.de> Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Andy Gross authored
commit 86b59bbf upstream. The runtime pm calls need to be done before populating the children via the i2c_add_adapter call. If this is not done, a child can run into issues trying to do i2c read/writes due to the pm_runtime_sync failing. Signed-off-by:
Andy Gross <agross@codeaurora.org> Reviewed-by:
Felipe Balbi <balbi@ti.com> Acked-by:
Bjorn Andersson <bjorn.andersson@sonymobile.com> Signed-off-by:
-
Mel Gorman authored
commit d3cb8bf6 upstream. A migration entry is marked as write if pte_write was true at the time the entry was created. The VMA protections are not double checked when migration entries are being removed as mprotect marks write-migration-entries as read. It means that potentially we take a spurious fault to mark PTEs write again but it's straight-forward. However, there is a race between write migrations being marked read and migrations finishing. This potentially allows a PTE to be write that should have been read. Close this race by double checking the VMA permissions using maybe_mkwrite when migration completes. [torvalds@linux-foundation.org: use maybe_mkwrite] Signed-off-by:
-
Johannes Weiner authored
commit 2f7dd7a4 upstream. The cgroup iterators yield css objects that have not yet gone through css_online(), but they are not complete memcgs at this point and so the memcg iterators should not return them. Commit d8ad3055 ("mm/memcg: iteration skip memcgs not yet fully initialized") set out to implement exactly this, but it uses CSS_ONLINE, a cgroup-internal flag that does not meet the ordering requirements for memcg, and so the iterator may skip over initialized groups, or return partially initialized memcgs. The cgroup core can not reasonably provide a clear answer on whether the object around the css has been fully initialized, as that depends on controller-specific locking and lifetime rules. Thus, introduce a memcg-specific flag that is set after the memcg has been initialized in css_online(), and read before mem_cgroup_iter() callers access the memcg members. Signed-off-by:
Johannes Weiner <hannes@cmpxchg.org> Cc: Tejun Heo <tj@kernel.org> Acked-by:
Michal Hocko <mhocko@suse.cz> Cc: Hugh Dickins <hughd@google.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by:
-
Peter Zijlstra authored
commit 6c72e350 upstream. Oleg noticed that a cleanup by Sylvain actually uncovered a bug; by calling perf_event_free_task() when failing sched_fork() we will not yet have done the memset() on ->perf_event_ctxp[] and will therefore try and 'free' the inherited contexts, which are still in use by the parent process. This is bad.. Suggested-by:
Oleg Nesterov <oleg@redhat.com> Reported-by:
Sylvain 'ythier' Hitier <sylvain.hitier@gmail.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Xiubo Li authored
commit 6596aa04 upstream. Since we cannot make sure the 'params->num_regs' will always be none zero here, and then if it equals to zero, the kmemdup() will return ZERO_SIZE_PTR, which equals to ((void *)16). So this patch fix this with just doing the zero check before calling kmemdup(). Signed-off-by:
Xiubo Li <Li.Xiubo@freescale.com> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Stefan Kristiansson authored
commit fe2a08b3 upstream. The correct type (SSM2602/SSM2603/SSM2604) is passed down from the ssm2602_spi_probe()/ssm2602_spi_probe() functions, so use that instead of hardcoding it to SSM2602 in ssm2602_probe(). Fixes: c924dc68 ("ASoC: ssm2602: Split SPI and I2C code into different modules") Signed-off-by:
Stefan Kristiansson <stefan.kristiansson@saunalahti.fi> Signed-off-by:
Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
-
Jan Kara authored
commit c03aa9f6 upstream. We did not implement any bound on number of indirect ICBs we follow when loading inode. Thus corrupted medium could cause kernel to go into an infinite loop, possibly causing a stack overflow. Fix the possible stack overflow by removing recursion from __udf_read_inode() and limit number of indirect ICBs we follow to avoid infinite loops. Signed-off-by:
Jan Kara <jack@suse.cz> Cc: Chuck Ebbert <cebbert.lkml@gmail.com> Signed-off-by:
-
- 05 Oct, 2014 7 commits
-
-
Greg Kroah-Hartman authored
-
Rajendra Nayak authored
commit af438fec upstream. Use the corresponding compatibles to identify the devices. Signed-off-by:
Rajendra Nayak <rnayak@ti.com> Signed-off-by:
Lokesh Vutla <lokeshvutla@ti.com> Acked-by:
Nishanth Menon <nm@ti.com> Tested-by:
Paul Walmsley <paul@pwsan.com> Cc: Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Stephen Boyd authored
commit 5b6b7490 upstream. Sometimes we need to program PLLs with a fixed rate configuration during driver probe. Doing this after we register the PLLs with the clock framework causes the common clock framework to assume the rate of the PLLs are 0. This causes all sorts of problems for rate recalculations because the common clock framework caches the rate once at registration time unless a flag is set to always recalculate the rates. Split the qcom_cc_probe() function into two pieces, map and everything else, so that drivers which need to configure some PLL rates or otherwise twiddle bits in the clock controller can do so before registering clocks. This allows us to properly detect the rates of PLLs that are programmed at boot. Fixes: 49fc825f "clk: qcom: Consolidate common probe code" Signed-off-by:
Stephen Boyd <sboyd@codeaurora.org> Signed-off-by:
-
Stephen Boyd authored
commit f87dfcab upstream. The mdp_lut_clk isn't a child of the mdp_clk. Instead it's the child of the mdp_src clock. Fix it. Fixes: 6d00b56f "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)" Signed-off-by:
-
Stephen Boyd authored
commit ff20783f upstream. Clocks that don't have a pre-divider don't list any pre-divider in their frequency tables, but their tables are initialized using aggregate initializers. Use tagged initializers so we properly assign the m and n values for each frequency. Furthermore, the mmcc_pxo_pll8_pll2_pll3 array improperly mapped the second element to pll2 instead of pll8, causing the clock driver to recalculate the wrong rate for any clocks using this array along with a rate that uses pll2. Plus the .num_parents field is 3 instead of 4 so you can't even switch the parent to pll3. Finally I noticed that the jpegd clock improperly indicates that the pre-divider width is only 2, when it's actually 4 bits wide. Fixes: 6d00b56f "clk: qcom: Add support for MSM8960's multimedia clock controller (MMCC)" Tested-by:
Rob Clark <robdclark@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 0bf22be0 upstream. The lustre virtual block device cannot handle 64K pages and fails at compile time. To avoid running into this error, let's disable the Kconfig option for this driver in cases it doesn't support. Reported-by:
Dann Frazier <dann.frazier@canonical.com> Signed-off-by:
-
Theodore Ts'o authored
commit a9cfcd63 upstream. Thanks to Dan Carpenter for extending smatch to find bugs like this. (This was found using a development version of smatch.) Fixes: 36de9286 Reported-by: Dan Carpenter <dan.carpenter@oracle.com Signed-off-by:
Theodore Ts'o <tytso@mit.edu> Signed-off-by:
-
