Skip to content

L
linux
Switch branch/tag
  1. 08 Sep, 2014 3 commits
    • Daniel Vetter's avatar
      drm/i915: Fix irq enable tracking in driver load · 4868b45d
      Daniel Vetter authored 
      A bunch of warnings fire on some ->irq_postinstall hooks since those
can enable interrupts (e.g. rps interrupts). And then our ordering
self-checks fire and complain.

To fix that set the tracking boolen before enabling the irqs with
drm_irq_install. Quoting the discussion with Jesse why that's safe:

On Tue, Aug 26, 2014 at 11:18 PM, Jesse Barnes <jbarnes@virtuousgeek.org> wrote:
> Yes, it might work, but if you look through the history, we set this
> field carefully; first to true in the irq_init code, then to false only
> after the irq_install completes.  So I think your fragility arguments
> apply to this change too.

Well we've done it in 4 commits or so, but currently we have:

- Set irqs_disabled to true early in driver load to make sure checks
that. That's done in irq_init, which is totally not the function that
enables interrupts, only the function that initializes all the vtables
and similar things. We actually have a fairly sane naming scheme
nowadays (not fully consistent ofc): _init is sw setup,
_enable/_hw_init is the actual hw setup. That is done in
95f25bed

- Set irqs_disabled to false right after the irqs are actually
enabled. This is done in ed2e6df1

So my change should only move the flag change over the ->preinstall
and ->postinstall hooks. I've done a little audit and didn't spot
anything amiss. Furthermore the runtime pm setup already clears
irqs_disabled _before_ calling these two hooks.

This regression has been introduced in

commit ed2e6df1
Author: Jesse Barnes <jbarnes@virtuousgeek.org>
Date:   Fri Jun 20 09:39:36 2014 -0700

    drm/i915: clear pm._irqs_disabled field after installing IRQs

Cc: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Tested-by: default avatarOliver Hartkopp <socketcan@hartkopp.net>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> # gm45, ilk
Reviewed-by: default avatarJesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      4868b45d
    • Daniel Vetter's avatar
      drm/i915: Fix EIO/wedged handling in gem fault handler · 2232f031
      Daniel Vetter authored 
      In

commit 1f83fee0
Author: Daniel Vetter <daniel.vetter@ffwll.ch>
Date:   Thu Nov 15 17:17:22 2012 +0100

    drm/i915: clear up wedged transitions

I've accidentally inverted the EIO/wedged handling in the fault
handler: We want to return the EIO as a SIGBUS only if it's not
because of the gpu having died, to prevent userspace from unduly
dying.

In my defence the comment right above is completely misleading, so fix
both.

v2: Drop the WARN_ON, it's not actually a bug to e.g. receive an -EIO
when swap-in fails.

v3: Don't remove too much ... oops.
Reported-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@intel.com>
Reviewed-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      2232f031
    • Chris Wilson's avatar
      drm/i915: Prevent recursive deadlock on releasing a busy userptr · ad46cb53
      Chris Wilson authored 
      During release of the GEM object we hold the struct_mutex. As the
object may be holding onto the last reference for the task->mm,
calling mmput() may trigger exit_mmap() which close the vma
which will call drm_gem_vm_close() and attempt to reacquire
the struct_mutex. In order to avoid that recursion, we have
to defer the mmput() until after we drop the struct_mutex,
i.e. we need to schedule a worker to do the clean up. A further issue
spotted by Tvrtko was caused when we took a GTT mmapping of a userptr
buffer object. In that case, we would never call mmput as the object
would be cyclically referenced by the GTT mmapping and not freed upon
process exit - keeping the entire process mm alive after the process
task was reaped. The fix employed is to replace the mm_users/mmput()
reference handling to mm_count/mmdrop() for the shared i915_mm_struct.

   INFO: task test_surfaces:1632 blocked for more than 120 seconds.
         Tainted: GF          O 3.14.5+ #1
   "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
   test_surfaces   D 0000000000000000     0  1632   1590 0x00000082
    ffff88014914baa8 0000000000000046 0000000000000000 ffff88014914a010
    0000000000012c40 0000000000012c40 ffff8800a0058210 ffff88014784b010
    ffff88014914a010 ffff880037b1c820 ffff8800a0058210 ffff880037b1c824
   Call Trace:
    [<ffffffff81582499>] schedule+0x29/0x70
    [<ffffffff815825fe>] schedule_preempt_disabled+0xe/0x10
    [<ffffffff81583b93>] __mutex_lock_slowpath+0x183/0x220
    [<ffffffff81583c53>] mutex_lock+0x23/0x40
    [<ffffffffa005c2a3>] drm_gem_vm_close+0x33/0x70 [drm]
    [<ffffffff8115a483>] remove_vma+0x33/0x70
    [<ffffffff8115a5dc>] exit_mmap+0x11c/0x170
    [<ffffffff8104d6eb>] mmput+0x6b/0x100
    [<ffffffffa00f44b9>] i915_gem_userptr_release+0x89/0xc0 [i915]
    [<ffffffffa00e6706>] i915_gem_free_object+0x126/0x250 [i915]
    [<ffffffffa005c06a>] drm_gem_object_free+0x2a/0x40 [drm]
    [<ffffffffa005cc32>] drm_gem_object_handle_unreference_unlocked+0xe2/0x120 [drm]
    [<ffffffffa005ccd4>] drm_gem_object_release_handle+0x64/0x90 [drm]
    [<ffffffff8127ffeb>] idr_for_each+0xab/0x100
    [<ffffffffa005cc70>] ?  drm_gem_object_handle_unreference_unlocked+0x120/0x120 [drm]
    [<ffffffff81583c46>] ? mutex_lock+0x16/0x40
    [<ffffffffa005c354>] drm_gem_release+0x24/0x40 [drm]
    [<ffffffffa005b82b>] drm_release+0x3fb/0x480 [drm]
    [<ffffffff8118d482>] __fput+0xb2/0x260
    [<ffffffff8118d6de>] ____fput+0xe/0x10
    [<ffffffff8106f27f>] task_work_run+0x8f/0xf0
    [<ffffffff81052228>] do_exit+0x1a8/0x480
    [<ffffffff81052551>] do_group_exit+0x51/0xc0
    [<ffffffff810525d7>] SyS_exit_group+0x17/0x20
    [<ffffffff8158e092>] system_call_fastpath+0x16/0x1b

v2: Incorporate feedback from Tvrtko and remove the unnessary mm
referencing when creating the i915_mm_struct and improve some of the
function names and comments.
Reported-by: default avatarJacek Danecki <jacek.danecki@intel.com>
Test-case: igt/gem_userptr_blits/process-exit*
Signed-off-by: default avatarChris Wilson <chris@chris-wilson.co.uk>
Tested-by: default avatar"Gong, Zhipeng" <zhipeng.gong@intel.com>
Cc: Jacek Danecki <jacek.danecki@intel.com>
Cc: "Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
Reviewed-by: default avatar"Ursulin, Tvrtko" <tvrtko.ursulin@intel.com>
Signed-off-by: default avatarDaniel Vetter <daniel.vetter@ffwll.ch>
Cc: stable@vger.kernel.org # hold off until 3.17 ships for additional testing
Signed-off-by: default avatarJani Nikula <jani.nikula@intel.com>
      ad46cb53
  3. 07 Sep, 2014 11 commits
  5. 06 Sep, 2014 6 commits
    • Linus Torvalds's avatar
      Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm · 2b12164b
      Linus Torvalds authored 
      Pull kvm fixes from Paolo Bonzini:
 "A smattering of bug fixes across most architectures"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  powerpc/kvm/cma: Fix panic introduces by signed shift operation
  KVM: s390/mm: Fix guest storage key corruption in ptep_set_access_flags
  KVM: s390/mm: Fix storage key corruption during swapping
  arm/arm64: KVM: Complete WFI/WFE instructions
  ARM/ARM64: KVM: Nuke Hyp-mode tlbs before enabling MMU
  KVM: s390/mm: try a cow on read only pages for key ops
  KVM: s390: Fix user triggerable bug in dead code
      2b12164b
    • Linus Torvalds's avatar
      Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc · 56c22854
      Linus Torvalds authored 
      Pull ARM SoC fixes from Kevin Hilman:
 "Another round of fixes from arm-soc land, which are mostly DT fixes
  for:

   - OMAP: handful of DT fixes devices on newly supported hardware
   - davinci: fix 2nd EDMA channel
   - ux500: extend previous pinctrl fix to another board
   - at91: clock registration fixes, compatibility string precision

  And one more fix for event cleanup in drivers/bus/arm-ccn"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  bus: arm-ccn: Move event cleanup routine
  ARM: at91/dt: rm9200: fix usb clock definition
  ARM: at91: rm9200: fix clock registration
  ARM: at91/dt: sam9g20: set at91sam9g20 pllb driver
  ARM: dts: dra7-evm: Add vtt regulator support
  ARM: dts: dra7-evm: Fix spi1 mux documentation
  ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND
  ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
  ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
  ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
  ARM: dts: am4372: fix USB regs size
  ARM: dts: am437x-gp: switch i2c0 to 100KHz
  ARM: dts: dra7-evm: Fix 8th NAND partition's name
  ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency
  ARM: ux500: disable msp2 node on Snowball
  ARM: edma: Fix configuration parsing for SoCs with multiple eDMA3 CC
  ARM: dts: set 'ti,set-rate-parent' for dpll4_m5x2 clock
      56c22854
    • Linus Torvalds's avatar
      Merge tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs · 11e97398
      Linus Torvalds authored 
      Pull xfs fixes from Dave Chinner:
 "The fixes all address recently discovered data corruption issues.

  The original Direct IO issue was discovered by Chris Mason @ Facebook
  on a production workload which mixed buffered reads with direct reads
  and writes IO to the same file.  The fix for that exposed other issues
  with page invalidation (exposed by millions of fsx operations) failing
  due to dirty buffers beyond EOF.

  Finally, the collapse_range code could also cause problems due to
  racing writeback changing the extent map while it was being shifted
  around.  The commits for that problem are simple mitigation fixes that
  prevent the problem from occuring.  A more robust fix for 3.18 that
  addresses the underlying problem is currently being worked on by
  Brian.

  Summary of fixes:
   - a direct IO read/buffered read data corruption
   - the associated fallout from the DIO data corruption fix
   - collapse range bugs that are potential data corruption issues"

* tag 'xfs-for-linus-3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/dgc/linux-xfs:
  xfs: trim eofblocks before collapse range
  xfs: xfs_file_collapse_range is delalloc challenged
  xfs: don't log inode unless extent shift makes extent modifications
  xfs: use ranged writeback and invalidation for direct IO
  xfs: don't zero partial page cache pages during O_DIRECT writes
  xfs: don't zero partial page cache pages during O_DIRECT writes
  xfs: don't dirty buffers beyond EOF
      11e97398
    • Linus Torvalds's avatar
      Merge tag 'for-linus-20140905' of git://git.infradead.org/linux-mtd · 925e0ea4
      Linus Torvalds authored 
      Pull mtd fixes from Brian Norris:
 "Two trivial MTD updates for 3.17-rc4:

   - a tiny comment tweak, to kill a bunch of DocBook warnings added
     during the merge window

   - a small fixup to the OTP routines' error handling"

* tag 'for-linus-20140905' of git://git.infradead.org/linux-mtd:
  mtd: nand: fix DocBook warnings on nand_sdr_timings doc
  mtd: cfi_cmdset_0002: check return code for get_chip()
      925e0ea4
    • Thomas Gleixner's avatar
      timekeeping: Update timekeeper before updating vsyscall and pvclock · 9bf2419f
      Thomas Gleixner authored 
      The update_walltime() code works on the shadow timekeeper to make the
seqcount protected region as short as possible. But that update to the
shadow timekeeper does not update all timekeeper fields because it's
sufficient to do that once before it becomes life. One of these fields
is tkr.base_mono. That stays stale in the shadow timekeeper unless an
operation happens which copies the real timekeeper to the shadow.

The update function is called after the update calls to vsyscall and
pvclock. While not correct, it did not cause any problems because none
of the invoked update functions used base_mono.

commit cbcf2dd3 (x86: kvm: Make kvm_get_time_and_clockread()
nanoseconds based) changed that in the kvm pvclock update function, so
the stale mono_base value got used and caused kvm-clock to malfunction.

Put the update where it belongs and fix the issue.
Reported-by: default avatarChris J Arges <chris.j.arges@canonical.com>
Reported-by: default avatarPaolo Bonzini <pbonzini@redhat.com>
Cc: Gleb Natapov <gleb@kernel.org>
Cc: John Stultz <john.stultz@linaro.org>
Link: http://lkml.kernel.org/r/alpine.DEB.2.10.1409050000570.3333@nanosSigned-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      9bf2419f
    • Thomas Gleixner's avatar
      compat: nanosleep: Clarify error handling · 849151dd
      Thomas Gleixner authored 
      The error handling in compat_sys_nanosleep() is correct, but
completely non obvious. Document it and restrict it to the
-ERESTART_RESTARTBLOCK return value for clarity.
Reported-by: default avatarKees Cook <keescook@chromium.org>
Signed-off-by: default avatarThomas Gleixner <tglx@linutronix.de>
      849151dd
  7. 05 Sep, 2014 17 commits
  9. 04 Sep, 2014 3 commits
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7