This patch adds compensation formula to raw readings, borrowed
from Memsic's input driver.
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Datasheet says (Page 2) that typical value for sensitivity
for 16 bits mode on Z-axis is 770. Anyhow, looking at the
input driver provided by Memsic the value for MMC35240 is
1024.

Also, testing shows that using 1024 for Z-axis senzitivity
offers better results.

Fixes: abeb6b1e ("iio: magnetometer: Add support for MEMSIC MMC35240")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

According to datasheet, Page 8, minimum wait time to complete
measurement is 10ms. Adjusting this value will increase the
userspace polling rate.

Fixes: abeb6b1e ("iio: magnetometer: Add support for MEMSIC MMC35240")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The current computation for fractional part of the magnetic
field is broken. This patch fixes it by taking a different
approach. We expose the raw reading in milli Gauss (to avoid
rounding errors) with a scale of 0.001.

Thus the final computation is done in userspace where floating
point operation are more relaxed.

Fixes: abeb6b1e ("iio: magnetometer: Add support for MEMSIC MMC35240")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This avoid nasty crashes when registering the IIO device.

Fixes: abeb6b1e ("iio: magnetometer: Add support for MEMSIC MMC35240")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This is the standard convention for i2c device name and
also this is the name used in some Intel platforms DT
files.

Fixes: abeb6b1e ("iio: magnetometer: Add support for MEMSIC MMC35240")
Signed-off-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

"index" needs to be signed for the error handling to work.

Fixes: be9e6229 ('iio: light: Add support for Sensortek STK3310')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The line before limits i to 0-3 so the existing code works fine but the
check is still off by one and >= is intended instead of >.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Daniel Baluta <daniel.baluta@intel.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In hardware mode we can not use the software demuxer, this means that the
selected scan mask needs to match one of the available scan masks exactly.

It also means that all attached buffers need to use the same scan mask.
Given that when operating in hardware mode there is typically only a single
buffer attached to the device this not an issue. Add a sanity check to make
sure that only a single buffer is attached in hardware mode nevertheless.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

For each buffer type specify the supported device modes for this buffer.
This allows us for devices which support multiple different operating modes
to pick the correct operating mode based on the modes supported by the
attached buffers.

It also prevents that buffers with conflicting modes are attached
to a device at the same time or that a buffer with a non-supported mode is
attached to a device (e.g. in-kernel callback buffer to a device only
supporting hardware mode).
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Even if no userspace consumer buffer is attached to the IIO device at
registration we still need to compute the masklength, since it is possible
that a in-kernel consumer buffer is going to get attached to the device at
a later point.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fix the module_param "instances" type to uint, since the variable type
holding the value is unsigned.
Signed-off-by: Vladimirs Ambrosovs <rodriguez.twister@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The functions iio_dummy_remove(), iio_simple_dummy_events_unregister() and
iio_dummy_evgen_release_irq() were changed to return void instead of int.
Signed-off-by: Vladimirs Ambrosovs <rodriguez.twister@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch fixes the init function for the iio_simple_dummy driver.
The main issues were absence of kfree for the allocated array, and no
devices being removed in case the probe function fails, running in a loop.
Signed-off-by: Vladimirs Ambrosovs <rodriguez.twister@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The same code is executed regardless ret value, so this test
can be removed.
Also fix coverity scan CID 1268786.
Signed-off-by: Laurent Navet <laurent.navet@gmail.com>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Mark strings, which are not supposed to be changed (basedir, filename,
value), as const in function parameters.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In generic_buffer.c: sort program parameters alphabetically and provide
		     usage information
In lsiio.c: drop unused parameters
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In build_channel_array(), count can be initialized already during variable
declaration.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In iioutils_get_type() it is logically better fitting to have sysfsfp
assigned zero right after closing it.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Change the assignment of *is_signed in iioutils_get_type() to a one-liner,
as already done with *be.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Refactor the code in print_event() to reduce code duplication and better
reflect that the type is output unconditionally, as well as cascade the
dependency of the diff-channel. Saves a few lines of code, as well.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Return directly, if no common cleanup is required.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Fully document public functions and elements.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add error handling to calls which can indicate a major problem by
returning an error code.
This also involves to change the type of dump_devices() from void to int.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add error handling to calls which can indicate a major problem by
returning an error code.
This also sets ret to -ENOENT in iioutils_get_type() and
iioutils_get_param_float() to indicate if no matching directory entry was
found.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add error handling to calls which can indicate a major problem by
returning an error code.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add error handling to calls which can indicate a major problem by
returning an error code.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Add handler to catch errors on conversion of numerical arguments.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

This patch catches errors in string allocation in generic_buffer.c,
iio_event_monitor.c, iio_utils.c and lsiio.c.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Functions _write_sysfs_int() and _write_sysfs_string() are supposed to
be called only by public wrappers, so make them static.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Previously, the return value of sscanf() was treated as an indication of
the digits it would have read. Yet, sscanf() only returns the amount of
valid matches.
Therefore, introduce a function to calculate the decimal digits of the
read number and use this one to commence a colon search, as originally
intended.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

fscanf() usually returns the number of input items successfully matched
and assigned, which can be fewer than provided (or even zero).
Add a check in iioutils_get_type() to make sure all items are matched.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Refactor process_scan() to handle signed and unsigned data, respect shifts
and the data mask for 2, 4 and 8 byte sized scan elements.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

find_type_by_name() returns a valid error code in case of an error. Pass
this code up instead of an artificial one.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Since errno contains the value of any of the defined error names, a
negation will not lead to the desired match.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

Move up error handling code to preserve the errno coming from ioctl(),
before it may be changed by close().
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

The man-page of errno states, that errno should be saved before doing any
library call, as that call may have changed the value of errno. So, when
encountering any error, save errno first.
This patch affects generic_buffer.c, iio_event_monitor.c and iio_utils.c.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In dump_channels() the DIR *dp was left open on exit. Close it and check
for errors.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In build_channel_array(), count needs to be decreased in more places since
current->name and current->generic_name would be freed on the error path,
although they have not been allocated, yet.
This also requires to free current->name, when it is allocated, but
current->generic_name is not yet allocated.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>

In iio_utils.c build_channel_array() dynamically allocates the string
generic_name in the current iio_channel_info, which doesn't got freed in
case of an error.
This dynamically allocated channel-array is used by generic_buffer, and
needs to be freed on the error/exit path.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Jonathan Cameron <jic23@kernel.org>