- 09 Jun, 2023 5 commits
-
-
Pierre-Eric Pelloux-Prayer authored
OpenGL EXT_robustness extension expects the driver to stop reporting GUILTY_CONTEXT_RESET when the reset has completed and the GPU is ready to accept submission again. This commit adds a AMDGPU_CTX_QUERY2_FLAGS_RESET_IN_PROGRESS flag, that let the UMD know that the reset is still not finished. Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/22290Reviewed-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
André Almeida <andrealmeid@igalia.com> Signed-off-by:
Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com> Signed-off-by:
Alex Deucher <alexander.deucher@amd.com>
-
Christophe JAILLET authored
It is likely p1_min_meta_chunk_bytes was expected here, instead of min_meta_chunk_bytes. Test the correct variable. Fixes: dda4fb85 ("drm/amd/display: DML changes for DCN32/321") Signed-off-by:
Christophe JAILLET <christophe.jaillet@wanadoo.fr> Signed-off-by:
Hamza Mahfooz <hamza.mahfooz@amd.com> Signed-off-by:
-
Christophe JAILLET authored
It is likely Height was expected here, instead of Width. Test the correct variable. Fixes: 17529ea2 ("drm/amd/display: Optimizations for DML math") Signed-off-by:
-
Sukrut Bellary authored
smatch warning - inconsistent handling of buffer object reserve and unreserve. Reviewed-by:
Sukrut Bellary <sukrut.bellary@linux.com> Signed-off-by:
-
Tom Rix authored
clang with W=1 reports drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dcn314/display_rq_dlg_calc_314.c:1003:15: error: variable 'dispclk_delay_subtotal' set but not used [-Werror,-Wunused-but-set-variable] unsigned int dispclk_delay_subtotal; ^ This variable is not used, so remove it. Which made dout unused, so also remove. Signed-off-by:Tom Rix <trix@redhat.com> Signed-off-by:
-
- 24 Apr, 2023 35 commits
-
-
Alex Deucher authored
This code was written prior to previous updates to this logic for other chips. The RSC registers are part of SMUIO which is an always on block so there is no need to disable gfxoff. Additionally add the carryover and preemption checks. v2: rebase Reviewed-by:
Hawking Zhang <Hawking.Zhang@amd.com> Signed-off-by:
-
Likun Gao authored
Add support for PSP vbflash sysfs interface with MP0 version v13.0.10. Signed-off-by:
Likun Gao <Likun.Gao@amd.com> Reviewed-by:
-
Aurabindo Pillai authored
This reverts commit 80c6d680. The orignal commit was intended as a workaround to prevent underflow and flickering when using one normal monitor and the other high refresh rate monitor (> 120Hz). This patch is being reverted in favour of a software solution to enable SubVP+DRR Signed-off-by:
Aurabindo Pillai <aurabindo.pillai@amd.com> Reviewed-by:
Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by:
-
Aric Cyr authored
This DC version brings along: - Improvements in the SubVP feature - Keep disable aux-i delay as 0 - Add p-state debugging and improvements - Fix in secure display context creation - add option to use custom backlight caps - Lowering min Z8 residency time - Restore rptr/wptr for DMCUB as workaround - Update FW feature caps struct Acked-by:
Aric Cyr <aric.cyr@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] Current Aux-I sequence checks for local_sink which isn't populated on MST links [HOW] Leave disable aux-i delay as 0 for MST cases Cc: stable@vger.kernel.org Tested-by:
Daniel Wheeler <daniel.wheeler@amd.com> Reviewed-by:
George Shen <George.Shen@amd.com> Reviewed-by:
Michael Strauss <michael.strauss@amd.com> Signed-off-by:
-
Alvin Lee authored
- We want to disable SubVP if Graphics Error Correction/Correcting Code (GECC) is enabled. - After reading feature caps from DMCUB during init, use the GECC enable/disable info to determine if SubVP can be enabled or not. Tested-by:
Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Reviewed-by:
Jun Lei <Jun.Lei@amd.com> Acked-by:
Alvin Lee <Alvin.Lee2@amd.com> Signed-off-by:
-
Alvin Lee authored
[Description] - Add debug option to enable SubVP for high refresh rate displays - For now limit the enabled modes based on a table in debug options - Currently disabled by default Tested-by:
-
Alvin Lee authored
- Previously update_clocks was overriding pstate support if it checked that there were no planes - However, P-State support should be determined in validation phase instead - This fixes an issue where a transition from FPO -> no planes expects UCLK MAX, but update_clocks was overriding to set UCLK to min Tested-by:
-
Sung Lee authored
[WHY] P-State related issues are fairly common but currently there is no way to debug these issues after the fact. [HOW] Add helpful registers to HW state queries Tested-by:
Sung Lee <sunglee@amd.com> Signed-off-by:
-
Gabe Teeger authored
[Why] Flickering and underflow was observed when testing extended blank on dcn314. [What] Vstartup is contrainted by vblank_nom, so adjusting it to include non-adjusted vtotal in its calculation during freesync video means that Vstartup is not changed when vtotal changes. This fixed the flickering + underflow. dc_extended_blank_supported function was removed because extended blank is only relevant to when zstate is supported. The increased vtotal during freesync can be passed to dml regardless of whether extended blank is supported or not, so this function is not needed. Updates were made recently in dml to the calculation of min_dst_y_next_start. Dml input for dcn314 will now always use the newer calculation for min_dst_y_next_start. Dml input for older dcn versions remains untouched. The variable optimized_min_dst_y_next_start is replaced everywhere with min_dst_y_next_start, and the updated dml allows min_dst_y_next_start to increase to an optimized value during freesync video, then return to default when freesync is disengaged. Also removed registry key for controlling extended blank feature. Tested-by:
Gabe Teeger <gabe.teeger@amd.com> Signed-off-by:
-
Alan Liu authored
[Why & How] We need to store CRTC information in secure_display_ctx, so postpone the call to amdgpu_dm_crtc_secure_display_create_contexts() until we initialize all CRTCs. Cc: stable@vger.kernel.org Tested-by:
Wayne Lin <Wayne.Lin@amd.com> Acked-by:
Alan Liu <HaoPing.Liu@amd.com> Signed-off-by:
-
Leo (Hanghong) Ma authored
[Why] Our QA found visual confirm color is not as expected for Auto Color Management feature test after enable it. [How] Calculate scaler recout data when visual confirm enabled to update the visual confirm bar on the display. Tested-by:
Leo (Hanghong) Ma <hanghong.ma@amd.com> Signed-off-by:
-
Aurabindo Pillai authored
OTG_V_TOTAL_MIN/MAX_SEL bits are required to be programmed to 1 if writes to OTG timing registers need to be honoured. This is usually needed only when freesync is active. However, SubVP + DRR requires that we're able to change timing even without freesync being active (but supported). By unconditionally writing this bit to 1, we remove an unnecessary dependency so that DMCUB can change OTG timing whenever it wants. Signed-off-by:
-
Josip Pavic authored
[Why & How] Provide option for vendors to specify a custom brightness-to-backlight conversion profile. Tested-by:
Anthony Koo <Anthony.Koo@amd.com> Acked-by:
Josip Pavic <Josip.Pavic@amd.com> Signed-off-by:
-
Leo Chen authored
[Why & How] Per HW team request, we're lowering the minimum Z8 residency time to 2000us. This enables Z8 support for additional modes we were previously blocking like 2k>60hz Cc: stable@vger.kernel.org Tested-by:
Leo Chen <sancchen@amd.com> Signed-off-by:
-
Alvin Lee authored
Enable SubVP on PSR panels now that we have FW support Tested-by:
-
Dmytro Laktyushkin authored
This feature is meant to unblock PSTATE for certain high end display configs on dcn315. This is achieved by allocating CRB to detile buffer based on display requirements to meet pstate latency hiding needs. Tested-by:
Charlene Liu <Charlene.Liu@amd.com> Acked-by:
Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Signed-off-by:
-
Alvin Lee authored
- Due to hardware related QoS issues, we need to limit certain SKUs with less memory channels to DPM1 and above. - At DPM0 + workload running, the urgent return latency can exceed 15us (the expected maximum is 4us) which results in underflow Cc: stable@vger.kernel.org Tested-by:
Saaem Rizvi <SyedSaaem.Rizvi@amd.com> Acked-by:
-
JinZe.Xu authored
[Why] States may be desync after resume. [How] Sync sw state with hw state. Tested-by:
JinZe.Xu <JinZe.Xu@amd.com> Signed-off-by:
-
Alvin Lee authored
Reorder FW feature caps struct variable order to ensure backwards compatability is maintained for older FW Tested-by:
Sung Lee <Sung.Lee@amd.com> Acked-by:
-
Alex Hung authored
[Why] When userspace (IGT) inserts EDID with audio data (ELD), EDID is not updated. [How] Implements force function (amdgpu_dm_connector_funcs_force) in amdgpu_dm_connector_funcs to create emulated sink and to handle EDID. Tested-by:
Hersen Wu <hersenxs.wu@amd.com> Acked-by:
Alex Hung <alex.hung@amd.com> Signed-off-by:
Wenchieh Chien <wenchieh.chien@amd.com> Signed-off-by:
-
Aric Cyr authored
Acked-by:
-
Anthony Koo authored
Add feature caps for Subvp + PSR so driver is back compatible Tested-by:
-
Alex Deucher authored
Provide a debugfs interface to access the MQD. Useful for debugging issues with the CP and MES hardware scheduler. v2: fix missing unreserve/unmap when pos >= size (Alex) Reviewed-by:
-
Alex Deucher authored
It varies by generation and we need to know the size to expose this via debugfs. Reviewed-by:
-
Alex Deucher authored
So UMDs can determine whether the kernel supports this. Mesa MR: https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/21986Signed-off-by:
-
Xiaogang Chen authored
amdgpu_ttm_tt_get_user_pages can fail(-EFAULT). If it failed mem has no associated hmm range or user_pages associated. Keep it at process_info->userptr_inval_list and mark mem->invalid until following scheduled attempts can valid it. Signed-off-by:
Xiaogang Chen <Xiaogang.Chen@amd.com> Reviewed-by:
Felix Kuehling <Felix.Kuehling@amd.com> Signed-off-by:
-
Michael Strauss authored
[WHY] 32ms delay was added to resolve issue with a specific sink, however this same delay also introduces erroneous link training failures with certain sink devices. [HOW] Only apply the 32ms delay for offending devices instead of globally. Tested-by:
-
Hersen Wu authored
[Why] implementation change of drm_edid_override_set since linux kernel 6.1, edid from debugfs is saved into connector->edid_override immediatey, not saved to connector->edid_blob_ptr at the same time. [How] call new drm_edid function drm_connector_update_edid_property to assign connector->edid_blob_ptr with override edid from debugfs. Tested-by:
Chao-kai Wang <Stylon.Wang@amd.com> Acked-by:
-
Alex Deucher authored
Use the new callback to fetch the data. Return an error if not supported. UMDs should use this query to check whether shadow buffers are supported and if so what size they should be. v2: return an error rather than a zerod structure. v3: drop GDS, move into dev_info structure. Data will be 0 if not supported. v4: drop local variable r Signed-off-by: -
Alex Deucher authored
Used to get the size and alignment requirements for the gfx shadow buffer for preemption. v2: use FW version check to determine whether to return a valid size here return an error if not supported (Alex) v3: drop GDS (Alex) v4: make amdgpu_gfx_shadow_info mandatory (Alex) Signed-off-by: -
Alex Deucher authored
To provide IP specific shadow sizes. UMDs will use this to query the kernel driver for the size of the shadow buffers. v2: make callback return an int (Alex) v3: drop GDS (Alex) Reviewed-by:
-
Alex Deucher authored
Add UAPI to query the GFX shadow buffer requirements for preemption on GFX11. UMDs need to specify the shadow areas for preemption. v2: move into existing asic info query drop GDS as its use is determined by the UMD (Marek) v3: Update comments to note that alignment is base virtual alignment (Alex) Reviewed-by:Marek Olšák <marek.olsak@amd.com> Signed-off-by:
-
Alex Deucher authored
We need to reset the shadow state every time we submit an IB and there needs to be a COND_EXEC packet after the SET_Q_PREEMPTION_MODE packet for it to work properly, so we should emit both of these packets regardless of whether there is a job present or not. Reviewed-by:
-
Christian König authored
Add ring callback for gfx to update the CP firmware with the new shadow information before we process the IB. v2: add implementation for new packet (Alex) v3: add current FW version checks (Alex) v4: only initialize shadow on first use Only set IB_VMID when a valid shadow buffer is present (Alex) v5: Pass parameters rather than job to new ring callback (Alex) Reviewed-by:
-
