Pull core block updates from Jens Axboe:
 "This may be the most quiet round we've had in years. I'm not
  complaining. Really not a lot to detail here, outside of spelling and
  documentation improvements/fixes, we have:

   - Allow t10-pi to be modular (Herbert)

   - Remove dead code in bfq (Alex)

   - Mark zone management requests with REQ_SYNC (Chaitanya)

   - BFQ division improvement (Wen)

   - Small series improving plugging (Pavel)"

* tag 'for-5.6/block-2020-01-27' of git://git.kernel.dk/linux-block:
  partitions/ldm: fix spelling mistake "to" -> "too"
  block, bfq: improve arithmetic division in bfq_delta()
  block/bfq: remove unused bfq_class_rt which never used
  block: mark zone-mgmt bios with REQ_SYNC
  blk-mq: Document functions for sending request
  block: Allow t10-pi to be modular
  blk-mq: optimise blk_mq_flush_plug_list()
  list: introduce list_for_each_continue()
  blk-mq: optimise rq sort function

Pull PNP updates from Rafael Wysocki:
 "Get rid of unused variable and function (yu kuai)"

* tag 'pnp-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PNP: isapnp: remove defined but not used function 'isapnp_checksum'
  PNP: isapnp: remove set but not used variable 'checksum'

Pull device properties framework updates from Rafael Wysocki:
 "Add support for reference properties in sofrware nodes (Dmitry
  Torokhov) and a basic test for property entries along with fixes on
  top of it (Dmitry Torokhov, Qian Cai, Alan Maguire)"

* tag 'devprop-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  software node: introduce CONFIG_KUNIT_DRIVER_PE_TEST
  usb: dwc3: use proper initializers for property entries
  drivers/base/test: fix global-out-of-bounds error
  software node: add basic tests for property entries
  software node: remove separate handling of references
  platform/x86: intel_cht_int33fe: use inline reference properties
  software node: implement reference properties
  software node: allow embedding of small arrays into property_entry
  software node: replace is_array with is_inline

Pull ACPI updates from Rafael Wysocki:
 "These update the ACPICA code in the kernel to the most recent upstream
  revision (20200110), add new hardware support to a handful of ACPI
  drivers, make the ACPI fan driver expose power states information for
  fans, add some more quirks, fix bugs and clean up assorted things.

  Specifics:

   - Update the ACPICA code in the kernel to upstream revision 20200110
     including:
      - Update of copyright notices to 2020 (Bob Moore).
      - Dispatcher fix to always generate buffer objects for the ASL
        create_field() operator (Maximilian Luz).
      - Debugger cleanup (Colin Ian King).
      - Disassembler change to create buffer fields in
        ACPI_PARSE_LOAD_PASS1 (Erik Kaneda).
      - UNIX line ending support for non-windows builds in acpisrc (Erik
        Kaneda).

   - Update the list of ACPICA maintainers (Rafael Wysocki).

   - Add Intel Tiger Lake ACPI device IDs to the ACPI DPTF, ACPI fan,
     int340x_thermal and intel-hid drivers (Gayatri Kammela).

   - Make the ACPI fan driver create additional sysfs attributes to
     expose power states information for fans (Srinivas Pandruvada).

   - Fix up the ACPI battery driver to deal with unexpected battery
     capacity information in a better way (Hans de Goede).

   - Add ACPI backlight quirks for Lenovo E41-25/45 and MSI MS-7721
     boards (Aaron Ma, Hans de Goede).

   - Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch to
     the ACPI button driver (Jason Ekstrand).

   - Drop TIMER_DEFERRABLE from the GHES polling mode timer function
     flags to make it run precisely at the configured time (Bhaskar
     Upadhaya).

   - Fix race condition related to the reference counting of query
     handlers in the ACPI EC driver (Rafael Wysocki).

   - Fix ACPI tools build issue (Zhengyuan Liu).

   - Replace dma_request_slave_channel() with dma_request_chan() in the
     firmware guide documentation for ACPI (Peter Ujfalusi).

   - Fix typo in a comment and clean up function parameter data type
     inconsistencies (Kacper Piwiński, Tian Tao)"

* tag 'acpi-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (25 commits)
  ACPICA: Update version to 20200110
  ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
  apei/ghes: Do not delay GHES polling
  ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch
  ACPI: PPTT: Consistently use unsigned int as parameter type
  ACPI: EC: Reference count query handlers under lock
  ACPICA: Update the list of maintainers
  ACPICA: Update version to 20191213
  ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
  ACPICA: acpisrc: add unix line ending support for non-windows build
  ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
  ACPICA: debugger: fix spelling mistake "adress" -> "address"
  ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
  docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan()
  thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
  platform/x86: intel-hid: Add Tiger Lake ACPI device ID
  ACPI: fan: Add Tiger Lake ACPI device ID
  ACPI: DPTF: Add Tiger Lake ACPI device IDs
  ACPI: fan: Expose fan performance state information
  tools/power/acpi: fix compilation error
  ...

Pull power management updates from Rafael Wysocki:
 "These add ACPI support to the intel_idle driver along with an admin
  guide document for it, add support for CPR (Core Power Reduction) to
  the AVS (Adaptive Voltage Scaling) subsystem, add new hardware support
  in a few places, add some new sysfs attributes, debugfs files and
  tracepoints, fix bugs and clean up a bunch of things all over.

  Specifics:

   - Update the ACPI processor driver in order to export
     acpi_processor_evaluate_cst() to the code outside of it, add ACPI
     support to the intel_idle driver based on that and clean up that
     driver somewhat (Rafael Wysocki).

   - Add an admin guide document for the intel_idle driver (Rafael
     Wysocki).

   - Clean up cpuidle core and drivers, enable compilation testing for
     some of them (Benjamin Gaignard, Krzysztof Kozlowski, Rafael
     Wysocki, Yangtao Li).

   - Fix reference counting of OPP (operating performance points) table
     structures (Viresh Kumar).

   - Add support for CPR (Core Power Reduction) to the AVS (Adaptive
     Voltage Scaling) subsystem (Niklas Cassel, Colin Ian King,
     YueHaibing).

   - Add support for TigerLake Mobile and JasperLake to the Intel RAPL
     power capping driver (Zhang Rui).

   - Update cpufreq drivers:
      - Add i.MX8MP support to imx-cpufreq-dt (Anson Huang).
      - Fix usage of a macro in loongson2_cpufreq (Alexandre Oliva).
      - Fix cpufreq policy reference counting issues in s3c and
        brcmstb-avs (chenqiwu).
      - Fix ACPI table reference counting issue and HiSilicon quirk
        handling in the CPPC driver (Hanjun Guo).
      - Clean up spelling mistake in intel_pstate (Harry Pan).
      - Convert the kirkwood and tegra186 drivers to using
        devm_platform_ioremap_resource() (Yangtao Li).

   - Update devfreq core:
      - Add 'name' sysfs attribute for devfreq devices (Chanwoo Choi).
      - Clean up the handing of transition statistics and allow them to
        be reset by writing 0 to the 'trans_stat' devfreq device
        attribute in sysfs (Kamil Konieczny).
      - Add 'devfreq_summary' to debugfs (Chanwoo Choi).
      - Clean up kerneldoc comments and Kconfig indentation (Krzysztof
        Kozlowski, Randy Dunlap).

   - Update devfreq drivers:
      - Add dynamic scaling for the imx8m DDR controller and clean up
        imx8m-ddrc (Leonard Crestez, YueHaibing).
      - Fix DT node reference counting and nitialization error code path
        in rk3399_dmc and add COMPILE_TEST and HAVE_ARM_SMCCC dependency
        for it (Chanwoo Choi, Yangtao Li).
      - Fix DT node reference counting in rockchip-dfi and make it use
        devm_platform_ioremap_resource() (Yangtao Li).
      - Fix excessive stack usage in exynos-ppmu (Arnd Bergmann).
      - Fix initialization error code paths in exynos-bus (Yangtao Li).
      - Clean up exynos-bus and exynos somewhat (Artur Świgoń, Krzysztof
        Kozlowski).

   - Add tracepoints for tracking usage_count updates unrelated to
     status changes in PM-runtime (Michał Mirosław).

   - Add sysfs attribute to control the "sync on suspend" behavior
     during system-wide suspend (Jonas Meurer).

   - Switch system-wide suspend tests over to 64-bit time (Alexandre
     Belloni).

   - Make wakeup sources statistics in debugfs cover deleted ones which
     used to be the case some time ago (zhuguangqing).

   - Clean up computations carried out during hibernation, update
     messages related to hibernation and fix a spelling mistake in one
     of them (Wen Yang, Luigi Semenzato, Colin Ian King).

   - Add mailmap entry for maintainer e-mail address that has not been
     functional for several years (Rafael Wysocki)"

* tag 'pm-5.6-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (83 commits)
  cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
  intel_idle: Clean up irtl_2_usec()
  intel_idle: Move 3 functions closer to their callers
  intel_idle: Annotate initialization code and data structures
  intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
  intel_idle: Rearrange intel_idle_cpuidle_driver_init()
  intel_idle: Clean up NULL pointer check in intel_idle_init()
  intel_idle: Fold intel_idle_probe() into intel_idle_init()
  intel_idle: Eliminate __setup_broadcast_timer()
  cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
  cpuidle: sysfs: fix warnings when compiling with W=1
  cpuidle: coupled: fix warnings when compiling with W=1
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
  PM / devfreq: Add debugfs support with devfreq_summary file
  Documentation: admin-guide: PM: Add intel_idle document
  cpuidle: arm: Enable compile testing for some of drivers
  PM-runtime: add tracepoints for usage_count changes
  cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
  PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
  ...

Pull regulator updates from Mark Brown:
 "Hardly anything going on in the core this time around with the
  regulator API and pretty quiet on the driver front:

   - An API for comparing regulators, useful for devices that need to
     check if supply voltages exactly match rather than just nominally
     match.

   - Conversion of several DT bindings to YAML format.

   - Conversion of I2C drivers to probe_new().

   - New drivers for Monolithic MPQ7920 and MP8859, and Rohm BD71828"

* tag 'regulator-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (34 commits)
  dt-bindings: regulator: add document bindings for mpq7920
  regulator: core: Fix exported symbols to the exported GPL version
  regulator: mpq7920: Fix incorrect defines
  regulator: vqmmc-ipq4019: Fix platform_no_drv_owner.cocci warnings
  regulator: vctrl-regulator: Avoid deadlock getting and setting the voltage
  regulator fix for "regulator: core: Add regulator_is_equal() helper"
  regulator: core: Add regulator_is_equal() helper
  regulator: mpq7920: Convert to use .probe_new
  regulator: mpq7920: Remove unneeded fields from struct mpq7920_regulator_info
  regulator: vqmmc-ipq4019: Trivial clean up
  regulator: vqmmc-ipq4019: Remove ipq4019_regulator_remove
  regulator: bindings: Drop document bindings for mpq7920
  dt-bindings: Drop entry for Monolithic Power System, MPS
  regulator: bd718x7: Simplify the code by removing struct bd718xx_pmic_inits
  regulator: add IPQ4019 SDHCI VQMMC LDO driver
  regulator: Convert i2c drivers to use .probe_new
  regulator: mpq7920: Check the correct variable in mpq7920_regulator_register()
  regulator: mpq7920: Fix Woverflow warning on conversion
  regulator: mp8859: tidy up white space in probe
  regulator: mpq7920: add mpq7920 regulator driver
  ...

Pull spi updates from Mark Brown:
 "Not much going on in the core for SPI this time but a reasonable
  amount of change in the drivers:

   - Removal of dmal_request_slave_channel() from Peter Ujfalusi.

   - More conversions of drivers to GPIO descriptors from Linus Walleij.

   - A big rework of the sh-msiof driver from Geert Uytterhoeven moving
     it over to the generic native chipselect support.

   - DMA support for the uniphier driver from Kunihiko Hayashi.

   - New driver support for HiSilcon v3xx SPI NOR controllers from John
     Garry"

* tag 'spi-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (52 commits)
  dt-binding: spi: add NPCM PSPI reset binding
  spi: pxa2xx: Avoid touching SSCR0_SSE on MMP2
  spi: spi-fsl-qspi: Ensure width is respected in spi-mem operations
  spi: npcm-pspi: modify reset support
  spi: npcm-pspi: improve spi transfer performance
  spi: spi-ti-qspi: fix warning
  spi: npcm-pspi: fix 16 bit send and receive support
  spi: pxa2xx: Add support for Intel Comet Lake PCH-V
  spi: fsl: simplify error path in of_fsl_spi_probe()
  spi: fsl-lpspi: fix only one cs-gpio working
  spi: spi-ti-qspi: optimize byte-transfers
  spi: spi-ti-qspi: support large flash devices
  spi: spi-qcom-qspi: Use device managed memory for clk_bulk_data
  MAINTAINERS: Add a maintainer for the HiSilicon v3xx SFC driver
  spi: Add HiSilicon v3xx SPI NOR flash controller driver
  dt-bindings: spi_atmel: add microchip,sam9x60-spi
  spi: bcm2835: Raise maximum number of slaves to 4
  spi: sh-msiof: Do not redefine STR while compile testing
  spi: rspi: Add support for GPIO chip selects
  spi: rspi: Add support for multiple native chip selects
  ...

Pull regmap updates from Mark Brown:
 "This is quite a busy release for a subsystem that's usually very
  quiet, though still a small set of updates in the grand scheme of
  things:

   - A fix for writes to non-incrementing registers.

   - An iopoll() style helper for use with atomic safe regmaps, making
     it easier to transition from raw memory mapped I/O.

   - Some constification"

* tag 'regmap-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
  regmap: fix writes to non incrementing registers
  regmap: add iopoll-like atomic polling macro
  regmap-i2c: constify regmap_bus structures

Pull dmaengine updates from Vinod Koul:
 "This time we have a bunch of core changes to support dynamic channels,
  hotplug of controllers, new apis for metadata ops etc along with new
  drivers for Intel data accelerators, TI K3 UDMA, PLX DMA engine and
  hisilicon Kunpeng DMA engine. Also usual assorted updates to drivers.

  Core:
   - Support for dynamic channels
   - Removal of various slave wrappers
   - Make few slave request APIs as private to dmaengine
   - Symlinks between channels and slaves
   - Support for hotplug of controllers
   - Support for metadata_ops for dma_async_tx_descriptor
   - Reporting DMA cached data amount
   - Virtual dma channel locking updates

  New drivers/device/feature support support:
   - Driver for Intel data accelerators
   - Driver for TI K3 UDMA
   - Driver for PLX DMA engine
   - Driver for hisilicon Kunpeng DMA engine
   - Support for eDMA support for QorIQ LS1028A in fsl edma driver
   - Support for cyclic dma in sun4i driver
   - Support for X1830 in JZ4780 driver"

* tag 'dmaengine-5.6-rc1' of git://git.infradead.org/users/vkoul/slave-dma: (62 commits)
  dmaengine: Create symlinks between DMA channels and slaves
  dmaengine: hisilicon: Add Kunpeng DMA engine support
  dmaengine: idxd: add char driver to expose submission portal to userland
  dmaengine: idxd: connect idxd to dmaengine subsystem
  dmaengine: idxd: add descriptor manipulation routines
  dmaengine: idxd: add sysfs ABI for idxd driver
  dmaengine: idxd: add configuration component of driver
  dmaengine: idxd: Init and probe for Intel data accelerators
  dmaengine: add support to dynamic register/unregister of channels
  dmaengine: break out channel registration
  x86/asm: add iosubmit_cmds512() based on MOVDIR64B CPU instruction
  dmaengine: ti: k3-udma: fix spelling mistake "limted" -> "limited"
  dmaengine: s3c24xx-dma: fix spelling mistake "to" -> "too"
  dmaengine: Move dma_get_{,any_}slave_channel() to private dmaengine.h
  dmaengine: Remove dma_request_slave_channel_compat() wrapper
  dmaengine: Remove dma_device_satisfies_mask() wrapper
  dt-bindings: fsl-imx-sdma: Add i.MX8MM/i.MX8MN/i.MX8MP compatible string
  dmaengine: zynqmp_dma: fix burst length configuration
  dmaengine: sun4i: Add support for cyclic requests with dedicated DMA
  dmaengine: fsl-qdma: fix duplicated argument to &&
  ...

Pull livepatching updates from Jiri Kosina:
 "Fixes for selftests and samples for 'shadow variables' livepatching
  feature, from Petr Mladek"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/livepatching/livepatching:
  livepatch: Handle allocation failure in the sample of shadow variable API
  livepatch/samples/selftest: Use klp_shadow_alloc() API correctly
  livepatch/selftest: Clean up shadow variable names and type
  livepatch/sample: Use the right type for the leaking data pointer

Pull HID updates from Jiri Kosina:
 "This time it's surprisingly quiet (probably due to the christmas
  break):

   - Logitech HID++ protocol improvements from Mazin Rezk, Pedro
     Vanzella and Adrian Freund

   - support for hidraw uniq ioctl from Marcel Holtmann"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
  HID: logitech-hidpp: avoid duplicate error handling code in 'hidpp_probe()'
  hid-logitech-hidpp: read battery voltage from newer devices
  HID: logitech: Add MX Master 3 Mouse
  HID: logitech-hidpp: Support WirelessDeviceStatus connect events
  HID: logitech-hidpp: Support translations from short to long reports
  HID: hidraw: add support uniq ioctl

Pull x86 platform driver updates from Andy Shevchenko:

 - Enable thermal policy for ASUS TUF FX705DY/FX505DY

 - Support left round button on ASUS N56VB

 - Support new Mellanox platforms of basic class VMOD0009 and VMOD0010

 - Intel Comet Lake, Tiger Lake and Elkhart Lake support in the PMC
   driver

 - Big clean-up to Intel PMC core, PMC IPC and SCU IPC drivers

 - Touchscreen support for the PiPO W11 tablet

* tag 'platform-drivers-x86-v5.6-1' of git://git.infradead.org/linux-platform-drivers-x86: (64 commits)
  platform/x86: intel_pmc_ipc: Switch to use driver->dev_groups
  platform/x86: intel_pmc_ipc: Propagate error from kstrtoul()
  platform/x86: intel_pmc_ipc: Use octal permissions in sysfs attributes
  platform/x86: intel_pmc_ipc: Get rid of unnecessary includes
  platform/x86: intel_pmc_ipc: Drop ipc_data_readb()
  platform/x86: intel_pmc_ipc: Drop intel_pmc_gcr_read() and intel_pmc_gcr_write()
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_raw_cmd() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_ipc_simple_command() static
  platform/x86: intel_pmc_ipc: Make intel_pmc_gcr_update() static
  platform/x86: intel_scu_ipc: Reformat kernel-doc comments of exported functions
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_raw_command()
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_io[read|write][8|16]()
  platform/x86: intel_scu_ipc: Drop unused macros
  platform/x86: intel_scu_ipc: Drop unused prototype intel_scu_ipc_fw_update()
  platform/x86: intel_scu_ipc: Sleeping is fine when polling
  platform/x86: intel_scu_ipc: Drop intel_scu_ipc_i2c_cntrl()
  platform/x86: intel_scu_ipc: Remove Lincroft support
  platform/x86: intel_scu_ipc: Add constants for register offsets
  platform/x86: intel_scu_ipc: Fix interrupt support
  platform/x86: intel_scu_ipcutil: Remove default y from Kconfig
  ...

Pull MMC updates from Ulf Hansson:
 "There are no updates for the MEMSTICK subsystem this time. But note
  that I am also carrying a patch from the pinctrl tree, which has been
  shared through an immutable branch.

  Summary:

  MMC core:
   - Convert to reasonable timeouts for all CMD6 commands (updates for
     BKOPS, CACHE_FLUSH and INAND_CMD38_ARG_EXT_CSD) for eMMC
   - Respect f_max clock rate at card initialization
   - Add gpiod_toggle_active_low() API
   - Consolidate slot-gpio code by using gpiod_toggle_active_low()

  MMC host:
   - Add pinctrl_select_default_state() API
   - Consolidate pintctrl code by using pinctrl_select_default_state()
   - mmci: Support any block sizes for SDIO for some variants
   - mmci: Enable reset control for stm32_sdmmc
   - mmc_spi: Toggle SPI_CS_HIGH polarity rather than hard-coding it
   - renesas_sdhi: Add support for the r8a77961 variant
   - renesas_sdhi: A few minor improvements
   - rockchip-dw-mshc: Add support for the rk3308 variant
   - sdhci: Enable support for external DMA controllers
   - sdhci: Fixup error path when sending CMD12
   - sdhci-brcmstb: Add support for 7216b0 variant
   - sdhci-brcmstb: Add support for command queuing (CQHCI)
   - sdhci-brcmstb: Add support for eMMC HS400ES mode
   - sdhci-msm: Add support for the sc7180 variant
   - sdhci-msm: Add support for command queuing (CQHCI)
   - sdhci-of-at91: Add support for the SAM9x60 variant
   - sdhci-of-at91: Improve support for tunings
   - sdhci-of-esdhc: A few fixups for some clock related issues
   - sdhci-omap: Add support for the am335x and the am437x variants
   - sdhci-omap: Improve support for erase operations
   - sdhci-omap: Add support for external DMA"

* tag 'mmc-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (89 commits)
  mmc: core: Default to generic_cmd6_time as timeout in __mmc_switch()
  mmc: block: Use generic_cmd6_time when modifying INAND_CMD38_ARG_EXT_CSD
  mmc: core: Specify timeouts for BKOPS and CACHE_FLUSH for eMMC
  mmc: sdhci-cadence: remove unneeded 'inline' marker
  dt-bindings: mmc: rockchip-dw-mshc: add description for rk3308
  dt-bindings: mmc: convert rockchip dw-mshc bindings to yaml
  dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
  mmc: sdhci-msm: Add CQHCI support for sdhci-msm
  mmc: sdhci: Let a vendor driver supply and update ADMA descriptor size
  mmc: sdhci-of-esdhc: fix serious issue clock is always disabled
  mmc: sdhci-of-esdhc: fix transfer mode register reading
  mmc: sdhci-brcmstb: Fix incorrect switch to HS mode
  mmc: sdhci-brcmstb: Add support for Command Queuing (CQE)
  mmc: sdhci-brcmstb: Add shutdown callback
  mmc: sdhci-brcmstb: Fix driver to defer on clk_get defer
  mmc: sdhci-brcmstb: Add ability to use HS400ES transfer mode
  dt-bindings: mmc: brcm,sdhci-brcmstb: Add support for 7216b0
  mmc: core: limit probe clock frequency to configured f_max
  mmc: sdhci-milbeaut: Remove redundant platform_get_irq error message
  mmc: sdhci: fix an issue of mixing different types
  ...

Pull i3c updates from Boris Brezillon:
 "Core changes:

   - Make i3c_bus_set_mode() static

  Driver changes:

   - Add a per-SoC data_hold_delay property to the Cadence driver

   - Fix formatting issues in the 'CADENCE I3C MASTER IP' MAINTAINERS
     entry

   - Use devm_platform_ioremap_resource() where appropriate

   - Adjust DesignWare reattach logic"

* tag 'i3c/for-5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
  i3c: master: dw: reattach device on first available location of address table
  i3c: master: cdns: convert to devm_platform_ioremap_resource
  i3c: master: dw: convert to devm_platform_ioremap_resource
  MAINTAINERS: fix style in CADENCE I3C MASTER IP entry
  i3c: master: make i3c_bus_set_mode static
  i3c: master: cdns: add data hold delay support

Pull x86 microcode update from Borislav Petkov:
 "Another boring branch this time around: mark a stub function inline,
  by Valdis Kletnieks"

* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/microcode/AMD: Make stub function static inline

Add device tree binding information for mpq7920 regulator driver.
Example bindings for mpq7920 are added.
Signed-off-by: Saravanan Sekar <sravanhome@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200123215338.11109-1-sravanhome@gmail.comSigned-off-by: Mark Brown <broonie@kernel.org>

Pull RAS updates from Borislav Petkov:

 - Misc fixes to the MCE code all over the place, by Jan H. Schönherr.

 - Initial support for AMD F19h and other cleanups to amd64_edac, by
   Yazen Ghannam.

 - Other small cleanups.

* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  EDAC/mce_amd: Make fam_ops static global
  EDAC/amd64: Drop some family checks for newer systems
  EDAC/amd64: Add family ops for Family 19h Models 00h-0Fh
  x86/amd_nb: Add Family 19h PCI IDs
  EDAC/mce_amd: Always load on SMCA systems
  x86/MCE/AMD, EDAC/mce_amd: Add new Load Store unit McaType
  x86/mce: Fix use of uninitialized MCE message string
  x86/mce: Fix mce=nobootlog
  x86/mce: Take action on UCNA/Deferred errors again
  x86/mce: Remove mce_inject_log() in favor of mce_log()
  x86/mce: Pass MCE message to mce_panic() on failed kernel recovery
  x86/mce/therm_throt: Mark throttle_active_work() as __maybe_unused

Pull EDAC updates from Borislav Petkov:
 "A totally boring branch this time around: a garden variety of small
  fixes all over the place"

* tag 'edac_for_5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
  EDAC/amd64: Do not warn when removing instances
  EDAC/sifive: Fix return value check in ecc_register()
  EDAC/aspeed: Remove unneeded semicolon
  EDAC: remove set but not used variable 'ecc_loc'
  EDAC: skx_common: downgrade message importance on missing PCI device
  EDAC/Kconfig: Fix Kconfig indentation

Pull hwmon updates from Guenter Roeck:
 "core:
   - Add support for enable attributes to hwmon core
   - Add intrusion templates

  pmbus:
   - Support for Infineon Multi-phase xdpe122 family controllers
   - Support for Intel IMVP9 and AMD 6.25mV modes
   - Support for vid mode detection per page bases
   - Detect if chip is write protected
   - Support for MAX20730, MAX20734, MAX20743, MAX20796, UCD90320,
     TPS53688
   - Various improvements to ibm-cffps driver

  k10temp:
   - Support for additional temperature sensors as well as voltage and
     current telemetry for Zen CPUs

  w83627ehf:
   - Remove support for NCT6775, NCT6776 (they have their own driver)

  New drivers:
   - ADM1177
   - MAX31730
   - Driver for disk and solid state drives with temperature sensors

  Other:
   - pwm-fan: stop fan on shutdown"

* tag 'hwmon-for-v5.6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (35 commits)
  hwmon: (k10temp) Display up to eight sets of CCD temperatures
  hwmon: (k10temp) Add debugfs support
  hwmon: (k10temp) Don't show temperature limits on Ryzen (Zen) CPUs
  hwmon: (k10temp) Show core and SoC current and voltages on Ryzen CPUs
  hwmon: (k10temp) Report temperatures per CPU die
  hmon: (k10temp) Convert to use devm_hwmon_device_register_with_info
  hwmon: (k10temp) Use bitops
  hwmon: (pwm-fan) stop fan on shutdown
  MAINTAINERS: add entry for ADM1177 driver
  dt-binding: hwmon: Add documentation for ADM1177
  hwmon: (adm1177) Add ADM1177 Hot Swap Controller and Digital Power Monitor driver
  docs: hwmon: Include 'xdpe12284.rst' into docs
  hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers
  hwmon: (pmbus/tps53679) Extend device list supported by driver
  hwmon: (pmbus/core) Add support for Intel IMVP9 and AMD 6.25mV modes
  hwmon: (pmbus/core) Add support for vid mode detection per page bases
  hwmon: (pmbus/ibm-cffps) Prevent writing on_off_config with bad data
  hwmon: (w83627ehf) Remove set but not used variable 'fan4min'
  hwmon: Driver for disk and solid state drives with temperature sensors
  hwmon: (pmbus/ibm-cffps) Fix the LED behavior when turned off
  ...

Pull tpm updates from Jarkko Sakkinen:
 "This adds a new sysfs file for querying TPM major version, which can
  be used by the user space the TPM protocol used to communicate with
  the chip"

* tag 'tpmdd-next-20200122' of git://git.infradead.org/users/jjs/linux-tpmdd:
  tpm: Add tpm_version_major sysfs file
  tpm: Update mailing list contact information in sysfs-class-tpm

Pull m68k updates from Geert Uytterhoeven:

 - wire up clone3() syscall

 - defconfig updates

* tag 'm68k-for-v5.6-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Implement copy_thread_tls()
  m68k: defconfig: Update defconfigs for v5.5-rc3
  m68k: Wire up clone3() syscall

Pull arm64 updates from Will Deacon:
 "The changes are a real mixed bag this time around.

  The only scary looking one from the diffstat is the uapi change to
  asm-generic/mman-common.h, but this has been acked by Arnd and is
  actually just adding a pair of comments in an attempt to prevent
  allocation of some PROT values which tend to get used for
  arch-specific purposes. We'll be using them for Branch Target
  Identification (a CFI-like hardening feature), which is currently
  under review on the mailing list.

  New architecture features:

   - Support for Armv8.5 E0PD, which benefits KASLR in the same way as
     KPTI but without the overhead. This allows KPTI to be disabled on
     CPUs that are not affected by Meltdown, even is KASLR is enabled.

   - Initial support for the Armv8.5 RNG instructions, which claim to
     provide access to a high bandwidth, cryptographically secure
     hardware random number generator. As well as exposing these to
     userspace, we also use them as part of the KASLR seed and to seed
     the crng once all CPUs have come online.

   - Advertise a bunch of new instructions to userspace, including
     support for Data Gathering Hint, Matrix Multiply and 16-bit
     floating point.

  Kexec:

   - Cleanups in preparation for relocating with the MMU enabled

   - Support for loading crash dump kernels with kexec_file_load()

  Perf and PMU drivers:

   - Cleanups and non-critical fixes for a couple of system PMU drivers

  FPU-less (aka broken) CPU support:

   - Considerable fixes to support CPUs without the FP/SIMD extensions,
     including their presence in heterogeneous systems. Good luck
     finding a 64-bit userspace that handles this.

  Modern assembly function annotations:

   - Start migrating our use of ENTRY() and ENDPROC() over to the
     new-fangled SYM_{CODE,FUNC}_{START,END} macros, which are intended
     to aid debuggers

  Kbuild:

   - Cleanup detection of LSE support in the assembler by introducing
     'as-instr'

   - Remove compressed Image files when building clean targets

  IP checksumming:

   - Implement optimised IPv4 checksumming routine when hardware offload
     is not in use. An IPv6 version is in the works, pending testing.

  Hardware errata:

   - Work around Cortex-A55 erratum #1530923

  Shadow call stack:

   - Work around some issues with Clang's integrated assembler not
     liking our perfectly reasonable assembly code

   - Avoid allocating the X18 register, so that it can be used to hold
     the shadow call stack pointer in future

  ACPI:

   - Fix ID count checking in IORT code. This may regress broken
     firmware that happened to work with the old implementation, in
     which case we'll have to revert it and try something else

   - Fix DAIF corruption on return from GHES handler with pseudo-NMIs

  Miscellaneous:

   - Whitelist some CPUs that are unaffected by Spectre-v2

   - Reduce frequency of ASID rollover when KPTI is compiled in but
     inactive

   - Reserve a couple of arch-specific PROT flags that are already used
     by Sparc and PowerPC and are planned for later use with BTI on
     arm64

   - Preparatory cleanup of our entry assembly code in preparation for
     moving more of it into C later on

   - Refactoring and cleanup"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (73 commits)
  arm64: acpi: fix DAIF manipulation with pNMI
  arm64: kconfig: Fix alignment of E0PD help text
  arm64: Use v8.5-RNG entropy for KASLR seed
  arm64: Implement archrandom.h for ARMv8.5-RNG
  arm64: kbuild: remove compressed images on 'make ARCH=arm64 (dist)clean'
  arm64: entry: Avoid empty alternatives entries
  arm64: Kconfig: select HAVE_FUTEX_CMPXCHG
  arm64: csum: Fix pathological zero-length calls
  arm64: entry: cleanup sp_el0 manipulation
  arm64: entry: cleanup el0 svc handler naming
  arm64: entry: mark all entry code as notrace
  arm64: assembler: remove smp_dmb macro
  arm64: assembler: remove inherit_daif macro
  ACPI/IORT: Fix 'Number of IDs' handling in iort_id_map()
  mm: Reserve asm-generic prot flags 0x10 and 0x20 for arch use
  arm64: Use macros instead of hard-coded constants for MAIR_EL1
  arm64: Add KRYO{3,4}XX CPU cores to spectre-v2 safe list
  arm64: kernel: avoid x18 in __cpu_soft_restart
  arm64: kvm: stop treating register x18 as caller save
  arm64/lib: copy_page: avoid x18 register in assembler code
  ...

- voltage support for newer Logitech HID++ devices, from Pedro Vanzella.

- MX Master support improvements, from Adrian Freund and Mazin Rezk

- support for uniq ioctl()

* pm-devfreq: (24 commits)
  PM / devfreq: Add debugfs support with devfreq_summary file
  PM / devfreq: exynos: Rename Exynos to lowercase
  PM / devfreq: imx8m-ddrc: Fix inconsistent IS_ERR and PTR_ERR
  PM / devfreq: exynos-bus: Add error log when fail to get devfreq-event
  PM / devfreq: exynos-bus: Disable devfreq-event device when fails
  PM / devfreq: rk3399_dmc: Disable devfreq-event device when fails
  PM / devfreq: imx8m-ddrc: Remove unused defines
  PM / devfreq: exynos-bus: Reduce goto statements and remove unused headers
  PM / devfreq: rk3399_dmc: Add COMPILE_TEST and HAVE_ARM_SMCCC dependency
  PM / devfreq: rockchip-dfi: Convert to devm_platform_ioremap_resource
  PM / devfreq: rk3399_dmc: Add missing of_node_put()
  PM / devfreq: rockchip-dfi: Add missing of_node_put()
  PM / devfreq: Fix multiple kernel-doc warnings
  PM / devfreq: exynos-bus: Extract exynos_bus_profile_init_passive()
  PM / devfreq: exynos-bus: Extract exynos_bus_profile_init()
  PM / devfreq: Move declaration of DEVICE_ATTR_RW(min_freq)
  PM / devfreq: Move statistics to separate struct devfreq_stats
  PM / devfreq: Add clearing transitions stats
  PM / devfreq: Change time stats to 64-bit
  PM / devfreq: Add new name attribute for sysfs
  ...

* pm-core:
  PM-runtime: add tracepoints for usage_count changes

* powercap:
  powercap/intel_rapl: add support for JasperLake
  x86/cpu: Add Jasper Lake to Intel family
  powercap/intel_rapl: add support for TigerLake Mobile

* pm-opp:
  opp: Replace list_kref with a local counter
  opp: Free static OPPs on errors while adding them

* pm-avs:
  power: avs: qcom-cpr: remove duplicated include from qcom-cpr.c
  power: avs: fix uninitialized error return on failed cpr_read_fuse_uV() call
  power: avs: qcom-cpr: make cpr_get_opp_hz_for_req() static
  power: avs: qcom-cpr: remove set but unused variable
  power: avs: qcom-cpr: make sure that regmap is available
  power: avs: qcom-cpr: fix unsigned expression compared with zero
  power: avs: qcom-cpr: fix invalid printk specifier in debug print
  power: avs: Add support for CPR (Core Power Reduction)
  dt-bindings: power: avs: Add support for CPR (Core Power Reduction)

* pm-misc:
  mailmap: Add entry for <rjw@sisk.pl>

* pm-cpufreq:
  cpufreq: loongson2_cpufreq: adjust cpufreq uses of LOONGSON_CHIPCFG
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  cpufreq: intel_pstate: fix spelling mistake: "Whethet" -> "Whether"
  cpufreq: s3c: fix unbalances of cpufreq policy refcount
  cpufreq: imx-cpufreq-dt: Add i.MX8MP support
  cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading
  cpufreq: tegra186: convert to devm_platform_ioremap_resource
  cpufreq: kirkwood: convert to devm_platform_ioremap_resource
  cpufreq: CPPC: put ACPI table after using it
  cpufreq : CPPC: Break out if HiSilicon CPPC workaround is matched

* pm-sleep:
  PM: suspend: Add sysfs attribute to control the "sync on suspend" behavior
  PM: hibernate: fix spelling mistake "shapshot" -> "snapshot"
  PM: hibernate: Add more logging on hibernation failure
  PM: hibernate: improve arithmetic division in preallocate_highmem_fraction()
  PM: wakeup: Show statistics for deleted wakeup sources again
  PM: sleep: Switch to rtc_time64_to_tm()/rtc_tm_to_time64()

* pm-cpuidle: (27 commits)
  intel_idle: Clean up irtl_2_usec()
  intel_idle: Move 3 functions closer to their callers
  intel_idle: Annotate initialization code and data structures
  intel_idle: Move and clean up intel_idle_cpuidle_devices_uninit()
  intel_idle: Rearrange intel_idle_cpuidle_driver_init()
  intel_idle: Clean up NULL pointer check in intel_idle_init()
  intel_idle: Fold intel_idle_probe() into intel_idle_init()
  intel_idle: Eliminate __setup_broadcast_timer()
  cpuidle: fix cpuidle_find_deepest_state() kerneldoc warnings
  cpuidle: sysfs: fix warnings when compiling with W=1
  cpuidle: coupled: fix warnings when compiling with W=1
  Documentation: admin-guide: PM: Add intel_idle document
  cpuidle: arm: Enable compile testing for some of drivers
  cpuidle: Drop unused cpuidle_driver_ref/unref() functions
  intel_idle: Use ACPI _CST on server systems
  intel_idle: Add module parameter to prevent ACPI _CST from being used
  intel_idle: Allow ACPI _CST to be used for selected known processors
  cpuidle: Allow idle states to be disabled by default
  intel_idle: Use ACPI _CST for processor models without C-state tables
  intel_idle: Refactor intel_idle_cpuidle_driver_init()
  ...

* acpi-tables:
  ACPI: PPTT: Consistently use unsigned int as parameter type

* acpi-button:
  ACPI: button: Add DMI quirk for Razer Blade Stealth 13 late 2019 lid switch

* acpi-ec:
  ACPI: EC: Reference count query handlers under lock

* acpi-doc:
  docs: firmware-guide: ACPI: Replace dma_request_slave_channel() with dma_request_chan()

* acpi-tools:
  tools/power/acpi: fix compilation error

* acpi-battery:
  ACPI / battery: Deal better with neither design nor full capacity not being reported
  ACPI / battery: Use design-cap for capacity calculations if full-cap is not available
  ACPI / battery: Deal with design or full capacity being reported as -1

* acpi-video:
  ACPI: video: Do not export a non working backlight interface on MSI MS-7721 boards
  ACPI: video: Use native backlight on Lenovo E41-25/45
  ACPI: video: fix typo in comment

* acpi-fan:
  ACPI: fan: Expose fan performance state information

* acpi-drivers:
  thermal: int340x_thermal: Add Tiger Lake ACPI device IDs
  platform/x86: intel-hid: Add Tiger Lake ACPI device ID
  ACPI: fan: Add Tiger Lake ACPI device ID
  ACPI: DPTF: Add Tiger Lake ACPI device IDs

* acpica:
  ACPICA: Update version to 20200110
  ACPICA: All acpica: Update copyrights to 2020 Including tool signons.
  ACPICA: Update the list of maintainers
  ACPICA: Update version to 20191213
  ACPICA: Dispatcher: always generate buffer objects for ASL create_field() operator
  ACPICA: acpisrc: add unix line ending support for non-windows build
  ACPICA: Disassembler: create buffer fields in ACPI_PARSE_LOAD_PASS1
  ACPICA: debugger: fix spelling mistake "adress" -> "address"

Pull operating performance points (OPP) framework updates for v5.6
from Viresh Kumar:

"This  contains a single patchset to fix reference counting of OPP
 table structures."

* 'opp/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  opp: Replace list_kref with a local counter
  opp: Free static OPPs on errors while adding them

Pull cpufreq material for v5.6 from Viresh Kumar:

"This contains:

- Update to imx cpufreq driver to add support for i.MX8MP platform.

- Blacklists few NVIDIA SoCs from cpufreq-dt-platdev layer.

- Convertion of few platform drivers to use
  devm_platform_ioremap_resource().

- Fixed refcount imbalance in few drivers."

* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
  cpufreq: brcmstb-avs: fix imbalance of cpufreq policy refcount
  cpufreq: s3c: fix unbalances of cpufreq policy refcount
  cpufreq: imx-cpufreq-dt: Add i.MX8MP support
  cpufreq: Use imx-cpufreq-dt for i.MX8MP's speed grading
  cpufreq: tegra186: convert to devm_platform_ioremap_resource
  cpufreq: kirkwood: convert to devm_platform_ioremap_resource

Pull io_uring fixes from Jens Axboe:
 "Fix for two regressions in this cycle, both reported by the postgresql
  use case.

  One removes the added restriction on who can submit IO, making it
  possible for rings shared across forks to do so. The other fixes an
  issue for the same kind of use case, where one exiting process would
  cancel all IO"

* tag 'io_uring-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
  io_uring: don't cancel all work on process exit
  Revert "io_uring: only allow submit from owning task"

Pull block fix from Jens Axboe:
 "Unfortunately this weekend we had a few last minute reports, one was
  for block.

  The partition disable for zoned devices was overly restrictive, it can
  work (and be supported) just fine for host-aware variants.

  Here's a fix ensuring that's the case so we don't break existing users
  of that"

* tag 'block-5.5-2020-01-26' of git://git.kernel.dk/linux-block:
  block: allow partitions on host aware zone devices

Pull SCSI fixes from James Bottomley:
 "Two last minute fixes, both in drivers.

  The fnic one is a highly unlikely condition, but the RDMA one is a
  recently introduced regression that causes a kernel warning to trigger
  in every RDMA logon, which would be unsightly if it got into the final
  release"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: RDMA/isert: Fix a recently introduced regression related to logout
  scsi: fnic: do not queue commands during fwreset

Pull vfs fix from Al Viro:
 "Fix a use-after-free in do_last() handling of sysctl_protected_...
  checks.

  The use-after-free normally doesn't happen there, but race with
  rename() and it becomes possible"

* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  do_last(): fetch directory ->i_mode and ->i_uid before it's too late

If we're sharing the ring across forks, then one process exiting means
that we cancel ALL work and prevent future work. This is overly
restrictive. As long as we cancel the work associated with the files
from the current task, it's safe to let others persist. Normal fd close
on exit will still wait (and cancel) pending work.

Fixes: fcb323cc ("io_uring: io_uring: add support for async work inheriting files")
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>