These are mutually exclusive, actually NFTA_SET_ELEM_KEY_END replaces
the flag notation.

Fixes: 7b225d0b ("netfilter: nf_tables: add NFTA_SET_ELEM_KEY_END attribute")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

The generation ID is bumped from the commit path while holding the
mutex, however, netlink dump operations rely on RCU.

This patch also adds missing cb->base_eq initialization in
nf_tables_dump_set().

Fixes: 38e029f1 ("netfilter: nf_tables: set NLM_F_DUMP_INTR if netlink dumping is stale")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Commit 50a896cf ("genetlink: properly support per-op policy dumping")
seems to have copy'n'pasted things a little incorrectly.

The #define CTRL_ATTR_MCAST_GRP_MAX should have stayed right
after the previous enum. The new CTRL_ATTR_POLICY_* needs
its own define for MAX and that max should not contain the
superfluous _DUMP in the name.

We probably can't do anything about the CTRL_ATTR_POLICY_DUMP_MAX
any more, there's likely code which uses it. For consistency
(*cough* codegen *cough*) let's add the correctly name define
nonetheless.
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

After a failed devlink reload, devlink parameters are still registered,
which means user space can set and get their values. In the case of the
mlxsw "acl_region_rehash_interval" parameter, these operations will
trigger a use-after-free [1].

Fix this by rejecting set and get operations while in the failed state.
Return the "-EOPNOTSUPP" error code which does not abort the parameters
dump, but instead causes it to skip over the problematic parameter.

Another possible fix is to perform these checks in the mlxsw parameter
callbacks, but other drivers might be affected by the same problem and I
am not aware of scenarios where these stricter checks will cause a
regression.

[1]
mlxsw_spectrum3 0000:00:10.0: Port 125: Failed to register netdev
mlxsw_spectrum3 0000:00:10.0: Failed to create ports

==================================================================
BUG: KASAN: use-after-free in mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904
Read of size 4 at addr ffff8880099dcfd8 by task kworker/u4:4/777

CPU: 1 PID: 777 Comm: kworker/u4:4 Not tainted 5.19.0-rc7-custom-126601-gfe26f28c586d #1
Hardware name: QEMU MSN4700, BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Workqueue: netns cleanup_net
Call Trace:
 <TASK>
 __dump_stack lib/dump_stack.c:88 [inline]
 dump_stack_lvl+0x92/0xbd lib/dump_stack.c:106
 print_address_description mm/kasan/report.c:313 [inline]
 print_report.cold+0x5e/0x5cf mm/kasan/report.c:429
 kasan_report+0xb9/0xf0 mm/kasan/report.c:491
 __asan_report_load4_noabort+0x14/0x20 mm/kasan/report_generic.c:306
 mlxsw_sp_acl_tcam_vregion_rehash_intrvl_get+0xbd/0xd0 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c:904
 mlxsw_sp_acl_region_rehash_intrvl_get+0x49/0x60 drivers/net/ethernet/mellanox/mlxsw/spectrum_acl.c:1106
 mlxsw_sp_params_acl_region_rehash_intrvl_get+0x33/0x80 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3854
 devlink_param_get net/core/devlink.c:4981 [inline]
 devlink_nl_param_fill+0x238/0x12d0 net/core/devlink.c:5089
 devlink_param_notify+0xe5/0x230 net/core/devlink.c:5168
 devlink_ns_change_notify net/core/devlink.c:4417 [inline]
 devlink_ns_change_notify net/core/devlink.c:4396 [inline]
 devlink_reload+0x15f/0x700 net/core/devlink.c:4507
 devlink_pernet_pre_exit+0x112/0x1d0 net/core/devlink.c:12272
 ops_pre_exit_list net/core/net_namespace.c:152 [inline]
 cleanup_net+0x494/0xc00 net/core/net_namespace.c:582
 process_one_work+0x9fc/0x1710 kernel/workqueue.c:2289
 worker_thread+0x675/0x10b0 kernel/workqueue.c:2436
 kthread+0x30c/0x3d0 kernel/kthread.c:376
 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:306
 </TASK>

The buggy address belongs to the physical page:
page:ffffea0000267700 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x99dc
flags: 0x100000000000000(node=0|zone=1)
raw: 0100000000000000 0000000000000000 dead000000000122 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
 ffff8880099dce80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8880099dcf00: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
>ffff8880099dcf80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
                                                    ^
 ffff8880099dd000: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
 ffff8880099dd080: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
==================================================================

Fixes: 98bbf70c ("mlxsw: spectrum: add "acl_region_rehash_interval" devlink param")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

In my test, balance-alb bonding with two slaves eth0 and eth1,
and then Bond0.150 is created with vlan id attached bond0.
After adding bond0.150 into one linux bridge, I noted that Bond0,
bond0.150 and  bridge were assigned to the same MAC as eth0.
Once bond0.150 receives a packet whose dest IP is bridge's
and dest MAC is eth1's, the linux bridge will not match
eth1's MAC entry in FDB, and not handle it as expected.
The patch fix the issue, and diagram as below:

eth1(mac:eth1_mac)--bond0(balance-alb,mac:eth0_mac)--eth0(mac:eth0_mac)
                      |
                   bond0.150(mac:eth0_mac)
                      |
                   bridge(ip:br_ip, mac:eth0_mac)--other port
Suggested-by: Hu Yadi <huyd12@chinatelecom.cn>
Signed-off-by: Sun Shouxin <sunshouxin@chinatelecom.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>

OutOctetsProtected, OutOctetsEncrypted, InOctetsValidated, and
InOctetsDecrypted were incrementing by the total number of octets in frames
instead of by the number of octets of User Data in frames.

The Controlled Port statistics ifOutOctets and ifInOctets were incrementing
by the total number of octets instead of the number of octets of the MSDUs
plus octets of the destination and source MAC addresses.

The Controlled Port statistics ifInDiscards and ifInErrors were not
incrementing each time the counters they aggregate were.

The Controlled Port statistic ifInErrors was not included in the output of
macsec_get_stats64 so the value was not present in ip commands output.

The ReceiveSA counters InPktsNotValid, InPktsNotUsingSA, and InPktsUnusedSA
were not incrementing.
Signed-off-by: Clayton Yager <Clayton_Yager@selinc.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Imagine two non-blocking vsock_connect() requests on the same socket.
The first request schedules @connect_work, and after it times out,
vsock_connect_timeout() sets *sock* state back to TCP_CLOSE, but keeps
*socket* state as SS_CONNECTING.

Later, the second request returns -EALREADY, meaning the socket "already
has a pending connection in progress", even though the first request has
already timed out.

As suggested by Stefano, fix it by setting *socket* state back to
SS_UNCONNECTED, so that the second request will return -ETIMEDOUT.
Suggested-by: Stefano Garzarella <sgarzare@redhat.com>
Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

An O_NONBLOCK vsock_connect() request may try to reschedule
@connect_work.  Imagine the following sequence of vsock_connect()
requests:

  1. The 1st, non-blocking request schedules @connect_work, which will
     expire after 200 jiffies.  Socket state is now SS_CONNECTING;

  2. Later, the 2nd, blocking request gets interrupted by a signal after
     a few jiffies while waiting for the connection to be established.
     Socket state is back to SS_UNCONNECTED, but @connect_work is still
     pending, and will expire after 100 jiffies.

  3. Now, the 3rd, non-blocking request tries to schedule @connect_work
     again.  Since @connect_work is already scheduled,
     schedule_delayed_work() silently returns.  sock_hold() is called
     twice, but sock_put() will only be called once in
     vsock_connect_timeout(), causing a memory leak reported by syzbot:

  BUG: memory leak
  unreferenced object 0xffff88810ea56a40 (size 1232):
    comm "syz-executor756", pid 3604, jiffies 4294947681 (age 12.350s)
    hex dump (first 32 bytes):
      00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
      28 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00  (..@............
    backtrace:
      [<ffffffff837c830e>] sk_prot_alloc+0x3e/0x1b0 net/core/sock.c:1930
      [<ffffffff837cbe22>] sk_alloc+0x32/0x2e0 net/core/sock.c:1989
      [<ffffffff842ccf68>] __vsock_create.constprop.0+0x38/0x320 net/vmw_vsock/af_vsock.c:734
      [<ffffffff842ce8f1>] vsock_create+0xc1/0x2d0 net/vmw_vsock/af_vsock.c:2203
      [<ffffffff837c0cbb>] __sock_create+0x1ab/0x2b0 net/socket.c:1468
      [<ffffffff837c3acf>] sock_create net/socket.c:1519 [inline]
      [<ffffffff837c3acf>] __sys_socket+0x6f/0x140 net/socket.c:1561
      [<ffffffff837c3bba>] __do_sys_socket net/socket.c:1570 [inline]
      [<ffffffff837c3bba>] __se_sys_socket net/socket.c:1568 [inline]
      [<ffffffff837c3bba>] __x64_sys_socket+0x1a/0x20 net/socket.c:1568
      [<ffffffff84512815>] do_syscall_x64 arch/x86/entry/common.c:50 [inline]
      [<ffffffff84512815>] do_syscall_64+0x35/0x80 arch/x86/entry/common.c:80
      [<ffffffff84600068>] entry_SYSCALL_64_after_hwframe+0x44/0xae
  <...>

Use mod_delayed_work() instead: if @connect_work is already scheduled,
reschedule it, and undo sock_hold() to keep the reference count
balanced.

Reported-and-tested-by: syzbot+b03f55bf128f9a38f064@syzkaller.appspotmail.com
Fixes: d021c344 ("VSOCK: Introduce VM Sockets")
Co-developed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This reverts commit 36a15e1c.

The usage of FLAG_SEND_ZLP causes problems to other firmware/hardware
versions that have no issues.

The FLAG_SEND_ZLP is not safe to use in this context.
See:
https://patchwork.ozlabs.org/project/netdev/patch/1270599787.8900.8.camel@Linuxdev4-laptop/#118378
The original problem needs another way to solve.

Fixes: 36a15e1c ("net: usb: ax88179_178a needs FLAG_SEND_ZLP")
Cc: stable@vger.kernel.org
Reported-by: Ronald Wahl <ronald.wahl@raritan.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216327
Link: https://bugs.archlinux.org/task/75491Signed-off-by: Jose Alonso <joalonsof@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

'IPv4 and IPv4' should be 'IPv4 and IPv6'.
Signed-off-by: Topi Miettinen <toiwoton@gmail.com>
Acked-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'linux-can-fixes-for-6.0-20220810' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can

Marc Kleine-Budde says:

====================
this is a pull request of 4 patches for net/master, with the
whitespace issue fixed.

Fedor Pchelkin contributes 2 fixes for the j1939 CAN protocol.

A patch by me for the ems_usb driver fixes an unaligned access
warning.

Sebastian Würl's patch for the mcp251x driver fixes a race condition
in the receive interrupt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Matthias May says:

====================
Do not use RT_TOS for IPv6 flowlabel

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.
====================

Link: https://lore.kernel.org/r/20220805191906.9323-1-matthias.may@westermo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.

Fixes: 571912c6 ("net: UDP tunnel encapsulation module for tunnelling different protocols like MPLS, IP, NSH etc.")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.

Fixes: ce99f6b9 ("net/mlx5e: Support SRIOV TC encapsulation offloads for IPv6 tunnels")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.

Fixes: 1400615d ("vxlan: allow setting ipv6 traffic class")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

According to Guillaume Nault RT_TOS should never be used for IPv6.

Quote:
RT_TOS() is an old macro used to interprete IPv4 TOS as described in
the obsolete RFC 1349. It's conceptually wrong to use it even in IPv4
code, although, given the current state of the code, most of the
existing calls have no consequence.

But using RT_TOS() in IPv6 code is always a bug: IPv6 never had a "TOS"
field to be interpreted the RFC 1349 way. There's no historical
compatibility to worry about.

Fixes: 3a56f86f ("geneve: handle ipv6 priority like ipv4 tos")
Acked-by: Guillaume Nault <gnault@redhat.com>
Signed-off-by: Matthias May <matthias.may@westermo.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The current code retrieves the TOS field after the lookup
on the ipv4 routing table. The routing process currently
only allows routing based on the original 3 TOS bits, and
not on the full 6 DSCP bits.
As a result the retrieved TOS is cut to the 3 bits.
However for inheriting purposes the full 6 bits should be used.

Extract the full 6 bits before the route lookup and use
that instead of the cut off 3 TOS bits.

Fixes: e305ac6c ("geneve: Add support to collect tunnel metadata.")
Signed-off-by: Matthias May <matthias.may@westermo.com>
Acked-by: Guillaume Nault <gnault@redhat.com>
Link: https://lore.kernel.org/r/20220805190006.8078-1-matthias.may@westermo.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The final update statement of the for loop exceeds the array range, the
dereference of self->aq_vec[i] is not checked and then leads to the
index out of range error.
Also fixed this kind of coding style in other for loop.

[   97.937604] UBSAN: array-index-out-of-bounds in drivers/net/ethernet/aquantia/atlantic/aq_nic.c:1404:48
[   97.937607] index 8 is out of range for type 'aq_vec_s *[8]'
[   97.937608] CPU: 38 PID: 3767 Comm: kworker/u256:18 Not tainted 5.19.0+ #2
[   97.937610] Hardware name: Dell Inc. Precision 7865 Tower/, BIOS 1.0.0 06/12/2022
[   97.937611] Workqueue: events_unbound async_run_entry_fn
[   97.937616] Call Trace:
[   97.937617]  <TASK>
[   97.937619]  dump_stack_lvl+0x49/0x63
[   97.937624]  dump_stack+0x10/0x16
[   97.937626]  ubsan_epilogue+0x9/0x3f
[   97.937627]  __ubsan_handle_out_of_bounds.cold+0x44/0x49
[   97.937629]  ? __scm_send+0x348/0x440
[   97.937632]  ? aq_vec_stop+0x72/0x80 [atlantic]
[   97.937639]  aq_nic_stop+0x1b6/0x1c0 [atlantic]
[   97.937644]  aq_suspend_common+0x88/0x90 [atlantic]
[   97.937648]  aq_pm_suspend_poweroff+0xe/0x20 [atlantic]
[   97.937653]  pci_pm_suspend+0x7e/0x1a0
[   97.937655]  ? pci_pm_suspend_noirq+0x2b0/0x2b0
[   97.937657]  dpm_run_callback+0x54/0x190
[   97.937660]  __device_suspend+0x14c/0x4d0
[   97.937661]  async_suspend+0x23/0x70
[   97.937663]  async_run_entry_fn+0x33/0x120
[   97.937664]  process_one_work+0x21f/0x3f0
[   97.937666]  worker_thread+0x4a/0x3c0
[   97.937668]  ? process_one_work+0x3f0/0x3f0
[   97.937669]  kthread+0xf0/0x120
[   97.937671]  ? kthread_complete_and_exit+0x20/0x20
[   97.937672]  ret_from_fork+0x22/0x30
[   97.937676]  </TASK>

v2. fixed "warning: variable 'aq_vec' set but not used"

v3. simplified a for loop

Fixes: 97bde5c4 ("net: ethernet: aquantia: Support for NIC-specific code")
Signed-off-by: Chia-Lin Kao (AceLan) <acelan.kao@canonical.com>
Acked-by: Sudarsana Reddy Kalluru <skalluru@marvell.com>
Link: https://lore.kernel.org/r/20220808081845.42005-1-acelan.kao@canonical.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

s/by caused/be caused/
s/ax88786/ax88796/
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/7db4b622d2c3e5af58c1d1f32b81836f4af71f18.1659801746.git.christophe.jaillet@wanadoo.frSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for net:

1) Harden set element field checks to avoid out-of-bound memory access,
   this patch also fixes the type of issue described in 7e6bc1f6
   ("netfilter: nf_tables: stricter validation of element data") in a
   broader way.

2) Patches to restrict the chain, set, and rule id lookup in the
   transaction to the corresponding top-level table, patches from
   Thadeu Lima de Souza Cascardo.

3) Fix incorrect comment in ip6t_LOG.h

4) nft_data_init() performs upfront validation of the expected data.
   struct nft_data_desc is used to describe the expected data to be
   received from userspace. The .size field represents the maximum size
   that can be stored, for bound checks. Then, .len is an input/output field
   which stores the expected length as input (this is optional, to restrict
   the checks), as output it stores the real length received from userspace
   (if it was not specified as input). This patch comes in response to
   7e6bc1f6 ("netfilter: nf_tables: stricter validation of element data")
   to address this type of issue in a more generic way by avoid opencoded
   data validation. Next patch requires this as a dependency.

5) Disallow jump to implicit chain from set element, this configuration
   is invalid. Only allow jump to chain via immediate expression is
   supported at this stage.

6) Fix possible null-pointer derefence in the error path of table updates,
   if memory allocation of the transaction fails. From Florian Westphal.

* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
  netfilter: nf_tables: fix null deref due to zeroed list head
  netfilter: nf_tables: disallow jump to implicit chain from set element
  netfilter: nf_tables: upfront validation of data via nft_data_init()
  netfilter: ip6t_LOG: Fix a typo in a comment
  netfilter: nf_tables: do not allow RULE_ID to refer to another chain
  netfilter: nf_tables: do not allow CHAIN_ID to refer to another table
  netfilter: nf_tables: do not allow SET_ID to refer to another table
  netfilter: nf_tables: validate variable length element extension
====================

Link: https://lore.kernel.org/r/20220809220532.130240-1-pablo@netfilter.org/Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The mcp251x driver uses both receiving mailboxes of the CAN controller
chips. For retrieving the CAN frames from the controller via SPI, it checks
once per interrupt which mailboxes have been filled and will retrieve the
messages accordingly.

This introduces a race condition, as another CAN frame can enter mailbox 1
while mailbox 0 is emptied. If now another CAN frame enters mailbox 0 until
the interrupt handler is called next, mailbox 0 is emptied before
mailbox 1, leading to out-of-order CAN frames in the network device.

This is fixed by checking the interrupt flags once again after freeing
mailbox 0, to correctly also empty mailbox 1 before leaving the handler.

For reproducing the bug I created the following setup:
 - Two CAN devices, one Raspberry Pi with MCP2515, the other can be any.
 - Setup CAN to 1 MHz
 - Spam bursts of 5 CAN-messages with increasing CAN-ids
 - Continue sending the bursts while sleeping a second between the bursts
 - Check on the RPi whether the received messages have increasing CAN-ids
 - Without this patch, every burst of messages will contain a flipped pair

v3: https://lore.kernel.org/all/20220804075914.67569-1-sebastian.wuerl@ororatech.com
v2: https://lore.kernel.org/all/20220804064803.63157-1-sebastian.wuerl@ororatech.com
v1: https://lore.kernel.org/all/20220803153300.58732-1-sebastian.wuerl@ororatech.com

Fixes: bf66f373 ("can: mcp251x: Move to threaded interrupts instead of workqueues.")
Signed-off-by: Sebastian Würl <sebastian.wuerl@ororatech.com>
Link: https://lore.kernel.org/all/20220804081411.68567-1-sebastian.wuerl@ororatech.com
[mkl: reduce scope of intf1, eflag1]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

WARNING: suspicious RCU usage
5.2.0-rc2-00605-g2638eb8b #1 Not tainted
drivers/net/plip/plip.c:1110 suspicious rcu_dereference_check() usage!

plip_open is called with RTNL held, switch to the correct helper.

Fixes: 2638eb8b ("net: ipv4: provide __rcu annotation for ifa_list")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Link: https://lore.kernel.org/r/20220807115304.13257-1-fw@strlen.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>

On one of our machines we got:

kernel BUG at lib/dynamic_queue_limits.c:27!
Internal error: Oops - BUG: 0 [#1] PREEMPT SMP ARM
CPU: 0 PID: 1166 Comm: irq/41-bgmac Tainted: G        W  O    4.14.275-rt132 #1
Hardware name: BRCM XGS iProc
task: ee3415c0 task.stack: ee32a000
PC is at dql_completed+0x168/0x178
LR is at bgmac_poll+0x18c/0x6d8
pc : [<c03b9430>]    lr : [<c04b5a18>]    psr: 800a0313
sp : ee32be14  ip : 000005ea  fp : 00000bd4
r10: ee558500  r9 : c0116298  r8 : 00000002
r7 : 00000000  r6 : ef128810  r5 : 01993267  r4 : 01993851
r3 : ee558000  r2 : 000070e1  r1 : 00000bd4  r0 : ee52c180
Flags: Nzcv  IRQs on  FIQs on  Mode SVC_32  ISA ARM  Segment none
Control: 12c5387d  Table: 8e88c04a  DAC: 00000051
Process irq/41-bgmac (pid: 1166, stack limit = 0xee32a210)
Stack: (0xee32be14 to 0xee32c000)
be00:                                              ee558520 ee52c100 ef128810
be20: 00000000 00000002 c0116298 c04b5a18 00000000 c0a0c8c4 c0951780 00000040
be40: c0701780 ee558500 ee55d520 ef05b340 ef6f9780 ee558520 00000001 00000040
be60: ffffe000 c0a56878 ef6fa040 c0952040 0000012c c0528744 ef6f97b0 fffcfb6a
be80: c0a04104 2eda8000 c0a0c4ec c0a0d368 ee32bf44 c0153534 ee32be98 ee32be98
bea0: ee32bea0 ee32bea0 ee32bea8 ee32bea8 00000000 c01462e4 ffffe000 ef6f22a8
bec0: ffffe000 00000008 ee32bee4 c0147430 ffffe000 c094a2a8 00000003 ffffe000
bee0: c0a54528 00208040 0000000c c0a0c8c4 c0a65980 c0124d3c 00000008 ee558520
bf00: c094a23c c0a02080 00000000 c07a9910 ef136970 ef136970 ee30a440 ef136900
bf20: ee30a440 00000001 ef136900 ee30a440 c016d990 00000000 c0108db0 c012500c
bf40: ef136900 c016da14 ee30a464 ffffe000 00000001 c016dd14 00000000 c016db28
bf60: ffffe000 ee21a080 ee30a400 00000000 ee32a000 ee30a440 c016dbfc ee25fd70
bf80: ee21a09c c013edcc ee32a000 ee30a400 c013ec7c 00000000 00000000 00000000
bfa0: 00000000 00000000 00000000 c0108470 00000000 00000000 00000000 00000000
bfc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
bfe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000
[<c03b9430>] (dql_completed) from [<c04b5a18>] (bgmac_poll+0x18c/0x6d8)
[<c04b5a18>] (bgmac_poll) from [<c0528744>] (net_rx_action+0x1c4/0x494)
[<c0528744>] (net_rx_action) from [<c0124d3c>] (do_current_softirqs+0x1ec/0x43c)
[<c0124d3c>] (do_current_softirqs) from [<c012500c>] (__local_bh_enable+0x80/0x98)
[<c012500c>] (__local_bh_enable) from [<c016da14>] (irq_forced_thread_fn+0x84/0x98)
[<c016da14>] (irq_forced_thread_fn) from [<c016dd14>] (irq_thread+0x118/0x1c0)
[<c016dd14>] (irq_thread) from [<c013edcc>] (kthread+0x150/0x158)
[<c013edcc>] (kthread) from [<c0108470>] (ret_from_fork+0x14/0x24)
Code: a83f15e0 0200001a 0630a0e1 c3ffffea (f201f0e7)

The issue seems similar to commit 90b3b339 ("net: hisilicon: Fix a BUG
trigered by wrong bytes_compl") and potentially introduced by commit
b38c83dd ("bgmac: simplify tx ring index handling").

If there is an RX interrupt between setting ring->end
and netdev_sent_queue() we can hit the BUG_ON as bgmac_dma_tx_free()
can miscalculate the queue size while called from bgmac_poll().

The machine which triggered the BUG runs a v4.14 RT kernel - but the issue
seems present in mainline too.

Fixes: b38c83dd ("bgmac: simplify tx ring index handling")
Signed-off-by: Sandor Bodo-Merle <sbodomerle@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220808173939.193804-1-sbodomerle@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The way in which dsa_tree_change_tag_proto() works is that when
dsa_tree_notify() fails, it doesn't know whether the operation failed
mid way in a multi-switch tree, or it failed for a single-switch tree.
So even though drivers need to fail cleanly in
ds->ops->change_tag_protocol(), DSA will still call dsa_tree_notify()
again, to restore the old tag protocol for potential switches in the
tree where the change did succeeed (before failing for others).

This means for the felix driver that if we report an error in
felix_change_tag_protocol(), we'll get another call where proto_ops ==
old_proto_ops. If we proceed to act upon that, we may do unexpected
things. For example, we will call dsa_tag_8021q_register() twice in a
row, without any dsa_tag_8021q_unregister() in between. Then we will
actually call dsa_tag_8021q_unregister() via old_proto_ops->teardown,
which (if it manages to run at all, after walking through corrupted data
structures) will leave the ports inoperational anyway.

The bug can be readily reproduced if we force an error while in
tag_8021q mode; this crashes the kernel.

echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging
echo edsa > /sys/class/net/eno2/dsa/tagging # -EPROTONOSUPPORT

Unable to handle kernel NULL pointer dereference at virtual address 0000000000000014
Call trace:
 vcap_entry_get+0x24/0x124
 ocelot_vcap_filter_del+0x198/0x270
 felix_tag_8021q_vlan_del+0xd4/0x21c
 dsa_switch_tag_8021q_vlan_del+0x168/0x2cc
 dsa_switch_event+0x68/0x1170
 dsa_tree_notify+0x14/0x34
 dsa_port_tag_8021q_vlan_del+0x84/0x110
 dsa_tag_8021q_unregister+0x15c/0x1c0
 felix_tag_8021q_teardown+0x16c/0x180
 felix_change_tag_protocol+0x1bc/0x230
 dsa_switch_event+0x14c/0x1170
 dsa_tree_change_tag_proto+0x118/0x1c0

Fixes: 7a29d220 ("net: dsa: felix: reimplement tagging protocol change with function pointers")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20220808125127.3344094-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.0

First set of fixes for v6.0. Small one this time, fix a cfg80211
warning seen with brcmfmac and remove an unncessary inline keyword
from wilc1000.

* tag 'wireless-2022-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: wilc1000: fix spurious inline in wilc_handle_disconnect()
  wifi: cfg80211: Fix validating BSS pointers in __cfg80211_connect_result
====================

Link: https://lore.kernel.org/r/20220809164756.B1DAEC433D6@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In nf_tables_updtable, if nf_tables_table_enable returns an error,
nft_trans_destroy is called to free the transaction object.

nft_trans_destroy() calls list_del(), but the transaction was never
placed on a list -- the list head is all zeroes, this results in
a null dereference:

BUG: KASAN: null-ptr-deref in nft_trans_destroy+0x26/0x59
Call Trace:
 nft_trans_destroy+0x26/0x59
 nf_tables_newtable+0x4bc/0x9bc
 [..]

Its sane to assume that nft_trans_destroy() can be called
on the transaction object returned by nft_trans_alloc(), so
make sure the list head is initialised.

Fixes: 55dd6f93 ("netfilter: nf_tables: use new transaction infrastructure to handle table")
Reported-by: mingi cho <mgcho.minic@gmail.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Extend struct nft_data_desc to add a flag field that specifies
nft_data_init() is being called for set element data.

Use it to disallow jump to implicit chain from set element, only jump
to chain via immediate expression is allowed.

Fixes: d0e2c7de ("netfilter: nf_tables: add NFT_CHAIN_BINDING")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Instead of parsing the data and then validate that type and length are
correct, pass a description of the expected data so it can be validated
upfront before parsing it to bail out earlier.

This patch adds a new .size field to specify the maximum size of the
data area. The .len field is optional and it is used as an input/output
field, it provides the specific length of the expected data in the input
path. If then .len field is not specified, then obtained length from the
netlink attribute is stored. This is required by cmp, bitwise, range and
immediate, which provide no netlink attribute that describes the data
length. The immediate expression uses the destination register type to
infer the expected data type.

Relying on opencoded validation of the expected data might lead to
subtle bugs as described in 7e6bc1f6 ("netfilter: nf_tables:
stricter validation of element data").
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

s/_IPT_LOG_H/_IP6T_LOG_H/

While at it add some surrounding space to ease reading.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

When doing lookups for rules on the same batch by using its ID, a rule from
a different chain can be used. If a rule is added to a chain but tries to
be positioned next to a rule from a different chain, it will be linked to
chain2, but the use counter on chain1 would be the one to be incremented.

When looking for rules by ID, use the chain that was used for the lookup by
name. The chain used in the context copied to the transaction needs to
match that same chain. That way, struct nft_rule does not need to get
enlarged with another member.

Fixes: 1a94e38d ("netfilter: nf_tables: add NFTA_RULE_ID attribute")
Fixes: 75dd48e2 ("netfilter: nf_tables: Support RULE_ID reference in new rule")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

When doing lookups for chains on the same batch by using its ID, a chain
from a different table can be used. If a rule is added to a table but
refers to a chain in a different table, it will be linked to the chain in
table2, but would have expressions referring to objects in table1.

Then, when table1 is removed, the rule will not be removed as its linked to
a chain in table2. When expressions in the rule are processed or removed,
that will lead to a use-after-free.

When looking for chains by ID, use the table that was used for the lookup
by name, and only return chains belonging to that same table.

Fixes: 837830a4 ("netfilter: nf_tables: add NFTA_RULE_CHAIN_ID attribute")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

When doing lookups for sets on the same batch by using its ID, a set from a
different table can be used.

Then, when the table is removed, a reference to the set may be kept after
the set is freed, leading to a potential use-after-free.

When looking for sets by ID, use the table that was used for the lookup by
name, and only return sets belonging to that same table.

This fixes CVE-2022-2586, also reported as ZDI-CAN-17470.

Reported-by: Team Orca of Sea Security (@seasecresponse)
Fixes: 958bee14 ("netfilter: nf_tables: use new transaction infrastructure to handle sets")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Update template to validate variable length extensions. This patch adds
a new .ext_len[id] field to the template to store the expected extension
length. This is used to sanity check the initialization of the variable
length extension.

Use PTR_ERR() in nft_set_elem_init() to report errors since, after this
update, there are two reason why this might fail, either because of
ENOMEM or insufficient room in the extension field (EINVAL).

Kernels up until 7e6bc1f6 ("netfilter: nf_tables: stricter
validation of element data") allowed to copy more data to the extension
than was allocated. This ext_len field allows to validate if the
destination has the correct size as additional check.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

clang emits a -Wunaligned-access warning on struct __packed
ems_cpc_msg.

The reason is that the anonymous union msg (not declared as packed) is
being packed right after some non naturally aligned variables (3*8
bits + 2*32) inside a packed struct:

| struct __packed ems_cpc_msg {
| 	u8 type;	/* type of message */
| 	u8 length;	/* length of data within union 'msg' */
| 	u8 msgid;	/* confirmation handle */
| 	__le32 ts_sec;	/* timestamp in seconds */
| 	__le32 ts_nsec;	/* timestamp in nano seconds */
|	/* ^ not naturally aligned */
|
| 	union {
| 	/* ^ not declared as packed */
| 		u8 generic[64];
| 		struct cpc_can_msg can_msg;
| 		struct cpc_can_params can_params;
| 		struct cpc_confirm confirmation;
| 		struct cpc_overrun overrun;
| 		struct cpc_can_error error;
| 		struct cpc_can_err_counter err_counter;
| 		u8 can_state;
| 	} msg;
| };

Starting from LLVM 14, having an unpacked struct nested in a packed
struct triggers a warning. c.f. [1].

Fix the warning by marking the anonymous union as packed.

[1] https://github.com/llvm/llvm-project/issues/55520

Fixes: 702171ad ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface")
Link: https://lore.kernel.org/all/20220802094021.959858-1-mkl@pengutronix.de
Cc: Gerhard Uttenthaler <uttenthaler@ems-wuensche.com>
Cc: Sebastian Haas <haas@ems-wuensche.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

We need to drop skb references taken in j1939_session_skb_queue() when
destroying a session in j1939_session_destroy(). Otherwise those skbs
would be lost.

Link to Syzkaller info and repro: https://forge.ispras.ru/issues/11743.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

V1: https://lore.kernel.org/all/20220708175949.539064-1-pchelkin@ispras.ru

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Suggested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20220805150216.66313-1-pchelkin@ispras.ruSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

We should warn user-space that it is doing something wrong when trying
to activate sessions with identical parameters but WARN_ON_ONCE macro
can not be used here as it serves a different purpose.

So it would be good to replace it with netdev_warn_once() message.

Found by Linux Verification Center (linuxtesting.org) with Syzkaller.

Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Acked-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://lore.kernel.org/all/20220729143655.1108297-1-pchelkin@ispras.ru
[mkl: fix indention]
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fixes various issues related to ISO channel/socket support
 - Fixes issues when building with C=1
 - Fix cancel uninitilized work which blocks syzbot to run

* tag 'for-net-2022-08-08' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: ISO: Fix not using the correct QoS
  Bluetooth: don't try to cancel uninitialized works at mgmt_index_removed()
  Bluetooth: ISO: Fix iso_sock_getsockopt for BT_DEFER_SETUP
  Bluetooth: MGMT: Fixes build warnings with C=1
  Bluetooth: hci_event: Fix build warning with C=1
  Bluetooth: ISO: Fix memory corruption
  Bluetooth: Fix null pointer deref on unexpected status event
  Bluetooth: ISO: Fix info leak in iso_sock_getsockopt()
  Bluetooth: hci_conn: Fix updating ISO QoS PHY
  Bluetooth: ISO: unlock on error path in iso_sock_setsockopt()
  Bluetooth: L2CAP: Fix l2cap_global_chan_by_psm regression
====================

Link: https://lore.kernel.org/r/20220809001224.412807-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Since
commit e6e771b3 ("s390/qeth: detach netdevice while card is offline")
there was a timing window during recovery, that qeth_query_card_info could
be sent to the card, even before it was ready for it, leading to a failing
card recovery. There is evidence that this window was hit, as not all
callers of get_link_ksettings() check for netif_device_present.

Use cached values in qeth_get_link_ksettings(), instead of calling
qeth_query_card_info() and falling back to default values in case it
fails. Link info is already updated when the card goes online, e.g. after
STARTLAN (physical link up). Set the link info to default values, when the
card goes offline or at STOPLAN (physical link down). A follow-on patch
will improve values reported for link down.

Fixes: e6e771b3 ("s390/qeth: detach netdevice while card is offline")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Reviewed-by: Thorsten Winkler <twinkler@linux.ibm.com>
Link: https://lore.kernel.org/r/20220805155714.59609-1-wintera@linux.ibm.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

If CONFIG_NVMEM is not set of_nvmem_cell_get, of_nvmem_device_get
functions will return ERR_PTR(-EOPNOTSUPP) and "failed to get nvmem
cell io_impedance_ctrl" error would be reported despite "io_impedance_ctrl"
is completely missing in Device Tree and we should use default values.

Check -EOPNOTSUPP togather with -ENOENT to avoid this situation.

Fixes: 5c2d0a6a ("net: phy: dp83867: implement support for io_impedance_ctrl nvmem cell")
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805084843.24542-1-nikita.shubin@maquefel.meSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In case master/slave clock role is not specified (which is default), the
aneg registers will not be written.

The visible impact of this is missing pause advertisement.

So, rework genphy_c45_baset1_an_config_aneg() to be able to write
advertisement registers even if clock role is unknown.

Fixes: 3da8ffd8 ("net: phy: Add 10BASE-T1L support in phy-c45")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/20220805073159.908643-1-o.rempel@pengutronix.deSigned-off-by: Jakub Kicinski <kuba@kernel.org>