Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

This is the order in which the drivers are initialized in setup.c.
The order is important when the drivers are convertet to use the
initcall_*() startup framework.
Signed-off-by: Helge Deller <deller@gmx.de>

Older PA-RISC machines have LEDs which show the disk- and LAN-activity.
The computation is done in software and takes quite some time, e.g. on a
J6500 this may take up to 60% time of one CPU if the machine is loaded
via network traffic.

Since most people don't care about the LEDs, start with LEDs disabled and
just show a CPU heartbeat LED. The disk and LAN LEDs can be turned on
manually via /proc/pdc/led.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org>

The LBA has already called ioremap() to get it's virtual address,
which can be used for the IOSAPIC as well.
Avoid calling ioremap() again and just reuse the correct
iomem address for the IOSAPIC.
Signed-off-by: Helge Deller <deller@gmx.de>

No need to extract upper and lower 32bit values of the 64-bit value. Use
gcc's %R1 to access lower 32-bits and %1 to access upper 32-bits
instead.
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

The format of the Elf64 function descriptor is defined by the ABI.
Mention the various use cases in the comment.
Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

Signed-off-by: Helge Deller <deller@gmx.de>

parisc uses a top-down layout by default that exactly fits the generic
functions, so get rid of arch specific code and use the generic version
by selecting ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT.

Note that on parisc the stack always grows up and a "unlimited stack"
simply means that the value as defined in CONFIG_STACK_MAX_DEFAULT_SIZE_MB
should be used. So RLIM_INFINITY is not an indicator to use the legacy
memory layout.
Signed-off-by: Helge Deller <deller@gmx.de>

The lscpu command is broken since commit cab56b51 ("parisc: Fix
device names in /proc/iomem") added the PA pathname to all PA
devices, includig the CPUs.

lscpu parses /proc/cpuinfo and now believes it found different CPU
types since every CPU is listed with an unique identifier (PA
pathname).

Fix this problem by simply dropping the PA pathname when listing the
CPUs in /proc/cpuinfo. There is no need to show the pathname in this
procfs file.

Fixes: cab56b51 ("parisc: Fix device names in /proc/iomem")
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: <stable@vger.kernel.org> # v4.9+

The usage of page table locks in TLB fault handler is usually
only needed when debugging the kernel. So make this configuration
option dependend on DEBUG_KERNEL.
Signed-off-by: Helge Deller <deller@gmx.de>

This function pointer is only used by one function, so no need
to keep such an indirection.
Signed-off-by: Helge Deller <deller@gmx.de>

This was actually never really used, and the info it
prints won't help. Drop it.
Signed-off-by: Helge Deller <deller@gmx.de>

Prefer the Linux kernel sys_off_handler functionality over a
home-grown implementation.
Signed-off-by: Helge Deller <deller@gmx.de>

Pull tty/serial fixes from Greg KH:
 "Here are some small tty and serial core fixes for 6.5-rc7 that resolve
  a lot of reported issues.

  Primarily in here are the fixes for the serial bus code from Tony that
  came in -rc1, as it hit wider testing with the huge number of
  different types of systems and serial ports. All of the reported
  issues with duplicate names and other issues with this code are now
  resolved.

  Other than that included in here is:

   - n_gsm fix for a previous fix

   - 8250 lockdep annotation fix

   - fsl_lpuart serial driver fix

   - TIOCSTI documentation update for previous CAP_SYS_ADMIN change

  All of these have been in linux-next for a while with no reported
  problems"

* tag 'tty-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: core: Fix serial core port id, including multiport devices
  serial: 8250: drop lockdep annotation from serial8250_clear_IER()
  tty: n_gsm: fix the UAF caused by race condition in gsm_cleanup_mux
  serial: core: Revert port_id use
  TIOCSTI: Document CAP_SYS_ADMIN behaviour in Kconfig
  serial: 8250: Fix oops for port->pm on uart_change_pm()
  serial: 8250: Reinit port_id when adding back serial8250_isa_devs
  serial: core: Fix kmemleak issue for serial core device remove
  MAINTAINERS: Merge TTY layer and serial drivers
  serial: core: Fix serial_base_match() after fixing controller port name
  serial: core: Fix serial core controller port name to show controller id
  serial: core: Fix serial core port id to not use port->line
  serial: core: Controller id cannot be negative
  tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms

Pull rust fix from Miguel Ojeda:

 - Macros: fix 'HAS_*' redefinition by the '#[vtable]' macro
   under conditional compilation

* tag 'rust-fixes-6.5-rc7' of https://github.com/Rust-for-Linux/linux:
  rust: macros: vtable: fix `HAS_*` redefinition (`gen_const_name`)

Pull i2c fixes from Wolfram Sang:
 "Usual set of driver fixes. A bit more than usual because I was
  unavailable for a while"

* tag 'i2c-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: bcm-iproc: Fix bcm_iproc_i2c_isr deadlock issue
  i2c: Update documentation to use .probe() again
  i2c: sun6i-p2wi: Fix an error message in probe()
  i2c: hisi: Only handle the interrupt of the driver's transfer
  i2c: tegra: Fix i2c-tegra DMA config option processing
  i2c: tegra: Fix failure during probe deferral cleanup
  i2c: designware: Handle invalid SMBus block data response length value
  i2c: designware: Correct length byte validation logic
  i2c: imx-lpi2c: return -EINVAL when i2c peripheral clk doesn't work

Pull btrfs fixes from David Sterba:

 - fix infinite loop in readdir(), could happen in a big directory when
   files get renamed during enumeration

 - fix extent map handling of skipped pinned ranges

 - fix a corner case when handling ordered extent length

 - fix a potential crash when balance cancel races with pause

 - verify correct uuid when starting scrub or device replace

* tag 'for-6.5-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: fix incorrect splitting in btrfs_drop_extent_map_range
  btrfs: fix BUG_ON condition in btrfs_cancel_balance
  btrfs: only subtract from len_to_oe_boundary when it is tracking an extent
  btrfs: fix replace/scrub failure with metadata_uuid
  btrfs: fix infinite directory reads

Pull fbdev fixes and cleanups from Helge Deller:

 - various code cleanups in amifb, atmel_lcdfb, ssd1307fb, kyro and
   goldfishfb

* tag 'fbdev-for-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
  fbdev: goldfishfb: Do not check 0 for platform_get_irq()
  fbdev: atmel_lcdfb: Remove redundant of_match_ptr()
  fbdev: kyro: Remove unused declarations
  fbdev: ssd1307fb: Print the PWM's label instead of its number
  fbdev: mmp: fix value check in mmphw_probe()
  fbdev: amifb: Replace zero-length arrays with DECLARE_FLEX_ARRAY() helper

Pull block fixes from Jens Axboe:
 "Main thing here is the fix for the regression in flush handling which
  caused IO hangs/stalls for a few reporters. Hopefully that should all
  be sorted out now. Outside of that, just a few minor fixes for issues
  that were introduced in this cycle"

* tag 'block-6.5-2023-08-19' of git://git.kernel.dk/linux:
  blk-mq: release scheduler resource when request completes
  blk-crypto: dynamically allocate fallback profile
  blk-cgroup: hold queue_lock when removing blkg->q_node
  drivers/rnbd: restore sysfs interface to rnbd-client

Chuck reported [1] an IO hang problem on NFS exports that reside on SATA
devices and bisected to commit 615939a2 ("blk-mq: defer to the normal
submission path for post-flush requests").

We analysed the IO hang problem, found there are two postflush requests
waiting for each other.

The first postflush request completed the REQ_FSEQ_DATA sequence, so go to
the REQ_FSEQ_POSTFLUSH sequence and added in the flush pending list, but
failed to blk_kick_flush() because of the second postflush request which
is inflight waiting in scheduler queue.

The second postflush waiting in scheduler queue can't be dispatched because
the first postflush hasn't released scheduler resource even though it has
completed by itself.

Fix it by releasing scheduler resource when the first postflush request
completed, so the second postflush can be dispatched and completed, then
make blk_kick_flush() succeed.

While at it, remove the check for e->ops.finish_request, as all
schedulers set that. Reaffirm this requirement by adding a WARN_ON_ONCE()
at scheduler registration time, just like we do for insert_requests and
dispatch_request.

[1] https://lore.kernel.org/all/7A57C7AE-A51A-4254-888B-FE15CA21F9E9@oracle.com/

Link: https://lore.kernel.org/linux-block/20230819031206.2744005-1-chengming.zhou@linux.dev/Reported-by: kernel test robot <oliver.sang@intel.com>
Closes: https://lore.kernel.org/oe-lkp/202308172100.8ce4b853-oliver.sang@intel.com
Fixes: 615939a2 ("blk-mq: defer to the normal submission path for post-flush requests")
Reported-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Tested-by: Chuck Lever <chuck.lever@oracle.com>
Link: https://lore.kernel.org/r/20230813152325.3017343-1-chengming.zhou@linux.dev
[axboe: folded in incremental fix and added tags]
Signed-off-by: Jens Axboe <axboe@kernel.dk>

Pull media fixes from Mauro Carvalho Chehab:
 "Three driver fixes"

* tag 'media/v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: imx: imx7-media-csi: Fix applying format constraints
  media: uvcvideo: Fix menu count handling for userspace XU mappings
  media: mtk-jpeg: Set platform driver data earlier

Pull x86 fixes from Borislav Petkov:
 "Extraordinary embargoed times call for extraordinary measures. That's
  why this week's x86/urgent branch is larger than usual, containing all
  the known fallout fixes after the SRSO mitigation got merged.

  I know, it is a bit late in the game but everyone who has reported a
  bug stemming from the SRSO pile, has tested that branch and has
  confirmed that it fixes their bug.

  Also, I've run it on every possible hardware I have and it is looking
  good. It is running on this very machine while I'm typing, for 2 days
  now without an issue. Famous last words...

   - Use LEA ...%rsp instead of ADD %rsp in the Zen1/2 SRSO return
     sequence as latter clobbers flags which interferes with fastop
     emulation in KVM, leading to guests freezing during boot

   - A fix for the DIV(0) quotient data leak on Zen1 to clear the
     divider buffers at the right time

   - Disable the SRSO mitigation on unaffected configurations as it got
     enabled there unnecessarily

   - Change .text section name to fix CONFIG_LTO_CLANG builds

   - Improve the optprobe indirect jmp check so that certain
     configurations can still be able to use optprobes at all

   - A serious and good scrubbing of the untraining routines by PeterZ:
      - Add proper speculation stopping traps so that objtool is happy
      - Adjust objtool to handle the new thunks
      - Make the thunk pointer assignable to the different untraining
        sequences at runtime, thus avoiding the alternative at the
        return thunk. It simplifies the code a bit too.
      - Add a entry_untrain_ret() main entry point which selects the
        respective untraining sequence
      - Rename things so that they're more clear
      - Fix stack validation with FRAME_POINTER=y builds

   - Fix static call patching to handle when a JMP to the return thunk
     is the last insn on the very last module memory page

   - Add more documentation about what each untraining routine does and
     why"

* tag 'x86_urgent_for_v6.5_rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/srso: Correct the mitigation status when SMT is disabled
  x86/static_call: Fix __static_call_fixup()
  objtool/x86: Fixup frame-pointer vs rethunk
  x86/srso: Explain the untraining sequences a bit more
  x86/cpu/kvm: Provide UNTRAIN_RET_VM
  x86/cpu: Cleanup the untrain mess
  x86/cpu: Rename srso_(.*)_alias to srso_alias_\1
  x86/cpu: Rename original retbleed methods
  x86/cpu: Clean up SRSO return thunk mess
  x86/alternative: Make custom return thunk unconditional
  objtool/x86: Fix SRSO mess
  x86/cpu: Fix up srso_safe_ret() and __x86_return_thunk()
  x86/cpu: Fix __x86_return_thunk symbol type
  x86/retpoline,kprobes: Skip optprobe check for indirect jumps with retpolines and IBT
  x86/retpoline,kprobes: Fix position of thunk sections with CONFIG_LTO_CLANG
  x86/srso: Disable the mitigation on unaffected configurations
  x86/CPU/AMD: Fix the DIV(0) initial fix attempt
  x86/retpoline: Don't clobber RFLAGS during srso_safe_ret()

Pull powerpc fix from Michael Ellerman:

 - Fix hardened usercopy BUG when using /proc based firmware update
   interface

Thanks to Nathan Lynch and Kees Cook.

* tag 'powerpc-6.5-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/rtas_flash: allow user copy to flash block cache objects

blk_crypto_profile_init() calls lockdep_register_key(), which warns and
does not register if the provided memory is a static object.
blk-crypto-fallback currently has a static blk_crypto_profile and calls
blk_crypto_profile_init() thereupon, resulting in the warning and
failure to register.

Fortunately it is simple enough to use a dynamically allocated profile
and make lockdep function correctly.

Fixes: 2fb48d88 ("blk-crypto: use dynamic lock class for blk_crypto_profile::lock")
Cc: stable@vger.kernel.org
Signed-off-by: Sweet Tea Dorminy <sweettea-kernel@dorminy.me>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230817141615.15387-1-sweettea-kernel@dorminy.meSigned-off-by: Jens Axboe <axboe@kernel.dk>

When blkg is removed from q->blkg_list from blkg_free_workfn(), queue_lock
has to be held, otherwise, all kinds of bugs(list corruption, hard lockup,
..) can be triggered from blkg_destroy_all().

Fixes: f1c006f1 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: xiaoli feng <xifeng@redhat.com>
Cc: Chunyu Hu <chuhu@redhat.com>
Cc: Mike Snitzer <snitzer@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230817141751.1128970-1-ming.lei@redhat.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Commit 137380c0 renamed 'rnbd-client' to 'rnbd_client', this changed
sysfs interface to /sys/devices/virtual/rnbd_client/ctl/map_device
from /sys/devices/virtual/rnbd-client/ctl/map_device.

CC: Ivan Orlov <ivan.orlov0322@gmail.com>
CC: "Md. Haris Iqbal" <haris.iqbal@ionos.com>
CC: Jack Wang <jinpu.wang@ionos.com>
Fixes: 137380c0 ("block/rnbd: make all 'class' structures const")
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Acked-by: Jack Wang <jinpu.wang@ionos.com>
Link: https://lore.kernel.org/r/20230816022210.2501228-1-lizhijian@fujitsu.comSigned-off-by: Jens Axboe <axboe@kernel.dk>

Pull arm64 fixes from Catalin Marinas:
 "Two more SME fixes related to ptrace(): ensure that the SME is
  properly set up for the target thread and that the thread sees
  the ZT registers set via ptrace"

* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64/ptrace: Ensure that the task sees ZT writes on first use
  arm64/ptrace: Ensure that SME is set up for target when writing SSVE state

Pull gpio fixes from Bartosz Golaszewski:

 - fix a regression in the sysfs interface

 - fix a reference counting bug that's been around for years

 - MAINTAINERS update

* tag 'gpio-fixes-for-v6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
  gpiolib: fix reference leaks when removing GPIO chips still in use
  gpiolib: sysfs: Do unexport GPIO when user asks for it
  MAINTAINERS: add content regex for gpio-regmap

Pull smb client fix from Steve French:
 "A small SMB mount option fix, also for stable"

* tag '6.5-rc6-smb3-client-fix' of git://git.samba.org/sfrench/cifs-2.6:
  smb: client: fix null auth

Pull RISC-V fixes from Palmer Dabbelt:

 - avoid excessive rejections from seccomp RET_ERRNO rules

 - compressed jal/jalr decoding fix

 - fixes for independent irq/softirq stacks on kernels built with
   CONFIG_FRAME_POINTER=n

 - avoid a hang handling uaccess fixups

 - another build fix for toolchain ISA strings, this time for Zicsr and
   Zifenci on old GNU toolchains

* tag 'riscv-for-linus-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: Handle zicsr/zifencei issue between gcc and binutils
  riscv: uaccess: Return the number of bytes effectively not copied
  riscv: stack: Fixup independent softirq stack for CONFIG_FRAME_POINTER=n
  riscv: stack: Fixup independent irq stack for CONFIG_FRAME_POINTER=n
  riscv: correct riscv_insn_is_c_jr() and riscv_insn_is_c_jalr()
  riscv: entry: set a0 = -ENOSYS only when syscall != -1

Pull sound fixes from Takashi Iwai:
 "Slightly bigger than I wished, but here we go, a collection of fixes
  for 6.5.

  The only change in the core side is the ease for repeated ASoC error
  messages, and the rest are all pretty device-specific small fixes
  (including regression fixes) for ASoC Intel and HD-audio / USB-audio
  quirks"

* tag 'sound-6.5-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ALSA: hda/realtek - Remodified 3k pull low procedure
  ASoC: rt1308-sdw: fix random louder sound
  ALSA: hda/cs8409: Support new Dell Dolphin Variants
  ALSA: hda/realtek: Switch Dell Oasis models to use SPI
  ALSA: hda/realtek: Add quirks for HP G11 Laptops
  ASoC: meson: axg-tdm-formatter: fix channel slot allocation
  ASoC: SOF: ipc4-topology: Update the basecfg for copier earlier
  ASoC: SOF: intel: hda: Clean up link DMA for IPC3 during stop
  ASoC: Intel: sof-sdw-cs42142: fix for codec button mapping
  ASoC: Intel: sof-sdw: update jack detection quirk for LunarLake RVP
  ASoC: SOF: Fix incorrect use of sizeof in sof_ipc3_do_rx_work()
  ASoC: lower "no backend DAIs enabled for ... Port" log severity
  ASoC: rt5665: add missed regulator_bulk_disable
  ASoC: max98363: don't return on success reading revision ID
  ALSA: usb-audio: Add support for Mythware XA001AU capture and playback interfaces.
  ASoC: fsl: micfil: Use dual license micfil code

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix in_flight[issue_type] value error to properly manage requests

  MMC host:
   - wbsd: Fix double free in the probe error path
   - sunplus: Fix error path in probe
   - sdhci_f_sdh30: Fix order of function calls in sdhci_f_sdh30_remove"

* tag 'mmc-v6.5-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: f-sdh30: fix order of function calls in sdhci_f_sdh30_remove
  mmc: sunplus: Fix error handling in spmmc_drv_probe()
  mmc: sunplus: fix return value check of mmc_add_host()
  mmc: wbsd: fix double mmc_free_host() in wbsd_init()
  mmc: block: Fix in_flight[issue_type] value error

Pull pin control fixes from Linus Walleij:
 "Fixes two issues with the Qualcomm SA8775P platform:

   - Some minor device tree binding flunky that is nice to iron out but
     more importantly:

   - Support the increased interrupt targets mask from 3 to 4 bits,
     making interrupts with higher (hardware) numbers work"

* tag 'pinctrl-v6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
  pinctrl: qcom: Add intr_target_width field to support increased number of interrupt targets
  dt-bindings: pinctrl: qcom,sa8775p-tlmm: add gpio function constant

Pull ARM SoC fixes from Arnd Bergmann:
 "As usual, mostly DT fixes for the major Arm platforms from Qualcomm
  and NXP, plus a bit for Rockchips and others:

  The qualcomm fixes mainly deal with their higher-end arm64 devices
  trees, fixing issues in L3 interconnect, crypto, thermal, UFS and a
  regression for the DSI phy.

  NXP i.MX has two correctness fixes for the 64-bit chips, dealing with
  the imx93 "anatop" module and the CSI interface. On the 32-bit side,
  there are functional fixes for RTC, display and SD card intefaces.

  Rockchip fixes are for wifi support on certain boards, a eMMC
  stability and DT build warnings.

  On TI OMAP, a regulator is described in DT to avoid problems with the
  ethernet phy initialization.

  The code changes include a missing MMIO serialization on OMAP, plus a
  few minor fixes on ASpeed and AMD/Zynq chips"

* tag 'soc-fixes-6.5-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (30 commits)
  ARM: dts: am335x-bone-common: Add vcc-supply for on-board eeprom
  ARM: dts: am335x-bone-common: Add GPIO PHY reset on revision C3 board
  soc: aspeed: socinfo: Add kfree for kstrdup
  soc: aspeed: uart-routing: Use __sysfs_match_string
  ARM: dts: integrator: fix PCI bus dtc warnings
  arm64: dts: imx93: Fix anatop node size
  arm64: dts: qcom: sc7180: Fix DSI0_PHY reg-names
  ARM: dts: imx: Set default tuning step for imx6sx usdhc
  arm64: dts: imx8mm: Drop CSI1 PHY reference clock configuration
  arm64: dts: imx8mn: Drop CSI1 PHY reference clock configuration
  ARM: dts: imx: Set default tuning step for imx7d usdhc
  ARM: dts: imx6: phytec: fix RTC interrupt level
  ARM: dts: imx6sx: Remove LDB endpoint
  arm64: dts: rockchip: Fix Wifi/Bluetooth on ROCK Pi 4 boards
  ARM: zynq: Explicitly include correct DT includes
  arm64: dts: qcom: sa8775p-ride: Update L4C parameters
  arm64: dts: rockchip: minor whitespace cleanup around '='
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK 4C+
  arm64: dts: rockchip: Disable HS400 for eMMC on ROCK Pi 4
  arm64: dts: rockchip: add missing space before { on indiedroid nova
  ...

Pull asm-generic regression fix from Arnd Bergmann:
 "Just one partial revert for a commit from the merge window that caused
  annoying behavior when building old kernels on arm64 hosts"

* tag 'asm-generic-fix-6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  asm-generic: partially revert "Unify uapi bitsperlong.h for arm64, riscv and loongarch"