- 27 Jul, 2016 40 commits
-
-
WANG Cong authored
[ Upstream commit 82a31b92 ] Similar to commit 9b368814 ("net: fix bridge multicast packet checksum validation") we need to fixup the checksum for CHECKSUM_COMPLETE when pushing skb on RX path. Otherwise we get similar splats. Cc: Jamal Hadi Salim <jhs@mojatatu.com> Cc: Tom Herbert <tom@herbertland.com> Signed-off-by:
Cong Wang <xiyou.wangcong@gmail.com> Acked-by:
Jamal Hadi Salim <jhs@mojatatu.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
David S. Miller authored
[ Upstream commit eb70db87 ] People who use PACKET_FANOUT_HASH want a symmetric hash, meaning that they want packets going in both directions on a flow to hash to the same bucket. The core kernel SKB hash became non-symmetric when the ipv6 flow label and other entities were incorporated into the standard flow hash order to increase entropy. But there are no users of PACKET_FANOUT_HASH who want an assymetric hash, they all want a symmetric one. Therefore, use the flow dissector to compute a flat symmetric hash over only the protocol, addresses and ports. This hash does not get installed into and override the normal skb hash, so this change has no effect whatsoever on the rest of the stack. Reported-by:
Eric Leblond <eric@regit.org> Tested-by:
-
Peter Zijlstra authored
commit 89741892 upstream. As per commit: b7fa30c9 ("sched/fair: Fix post_init_entity_util_avg() serialization") > the code generated from update_cfs_rq_load_avg(): > > if (atomic_long_read(&cfs_rq->removed_load_avg)) { > s64 r = atomic_long_xchg(&cfs_rq->removed_load_avg, 0); > sa->load_avg = max_t(long, sa->load_avg - r, 0); > sa->load_sum = max_t(s64, sa->load_sum - r * LOAD_AVG_MAX, 0); > removed_load = 1; > } > > turns into: > > ffffffff81087064: 49 8b 85 98 00 00 00 mov 0x98(%r13),%rax > ffffffff8108706b: 48 85 c0 test %rax,%rax > ffffffff8108706e: 74 40 je ffffffff810870b0 <update_blocked_averages+0xc0> > ffffffff81087070: 4c 89 f8 mov %r15,%rax > ffffffff81087073: 49 87 85 98 00 00 00 xchg %rax,0x98(%r13) > ffffffff8108707a: 49 29 45 70 sub %rax,0x70(%r13) > ffffffff8108707e: 4c 89 f9 mov %r15,%rcx > ffffffff81087081: bb 01 00 00 00 mov $0x1,%ebx > ffffffff81087086: 49 83 7d 70 00 cmpq $0x0,0x70(%r13) > ffffffff8108708b: 49 0f 49 4d 70 cmovns 0x70(%r13),%rcx > > Which you'll note ends up with sa->load_avg -= r in memory at > ffffffff8108707a. So I _should_ have looked at other unserialized users of ->load_avg, but alas. Luckily nikbor reported a similar /0 from task_h_load() which instantly triggered recollection of this here problem. Aside from the intermediate value hitting memory and causing problems, there's another problem: the underflow detection relies on the signed bit. This reduces the effective width of the variables, IOW its effectively the same as having these variables be of signed type. This patch changes to a different means of unsigned underflow detection to not rely on the signed bit. This allows the variables to use the 'full' unsigned range. And it does so with explicit LOAD - STORE to ensure any intermediate value will never be visible in memory, allowing these unserialized loads. Note: GCC generates crap code for this, might warrant a look later. Note2: I say 'full' above, if we end up at U*_MAX we'll still explode; maybe we should do clamping on add too. Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Yuyang Du <yuyang.du@intel.com> Cc: bsegall@google.com Cc: kernel@kyup.com Cc: morten.rasmussen@arm.com Cc: pjt@google.com Cc: steve.muckle@linaro.org Fixes: 9d89c257 ("sched/fair: Rewrite runnable load and utilization average tracking") Link: http://lkml.kernel.org/r/20160617091948.GJ30927@twins.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kirill A. Shutemov authored
commit 4ac1c17b upstream. During page migrations UBIFS might get confused and the following assert triggers: [ 213.480000] UBIFS assert failed in ubifs_set_page_dirty at 1451 (pid 436) [ 213.490000] CPU: 0 PID: 436 Comm: drm-stress-test Not tainted 4.4.4-00176-geaa802524636-dirty #1008 [ 213.490000] Hardware name: Allwinner sun4i/sun5i Families [ 213.490000] [<c0015e70>] (unwind_backtrace) from [<c0012cdc>] (show_stack+0x10/0x14) [ 213.490000] [<c0012cdc>] (show_stack) from [<c02ad834>] (dump_stack+0x8c/0xa0) [ 213.490000] [<c02ad834>] (dump_stack) from [<c0236ee8>] (ubifs_set_page_dirty+0x44/0x50) [ 213.490000] [<c0236ee8>] (ubifs_set_page_dirty) from [<c00fa0bc>] (try_to_unmap_one+0x10c/0x3a8) [ 213.490000] [<c00fa0bc>] (try_to_unmap_one) from [<c00fadb4>] (rmap_walk+0xb4/0x290) [ 213.490000] [<c00fadb4>] (rmap_walk) from [<c00fb1bc>] (try_to_unmap+0x64/0x80) [ 213.490000] [<c00fb1bc>] (try_to_unmap) from [<c010dc28>] (migrate_pages+0x328/0x7a0) [ 213.490000] [<c010dc28>] (migrate_pages) from [<c00d0cb0>] (alloc_contig_range+0x168/0x2f4) [ 213.490000] [<c00d0cb0>] (alloc_contig_range) from [<c010ec00>] (cma_alloc+0x170/0x2c0) [ 213.490000] [<c010ec00>] (cma_alloc) from [<c001a958>] (__alloc_from_contiguous+0x38/0xd8) [ 213.490000] [<c001a958>] (__alloc_from_contiguous) from [<c001ad44>] (__dma_alloc+0x23c/0x274) [ 213.490000] [<c001ad44>] (__dma_alloc) from [<c001ae08>] (arm_dma_alloc+0x54/0x5c) [ 213.490000] [<c001ae08>] (arm_dma_alloc) from [<c035cecc>] (drm_gem_cma_create+0xb8/0xf0) [ 213.490000] [<c035cecc>] (drm_gem_cma_create) from [<c035cf20>] (drm_gem_cma_create_with_handle+0x1c/0xe8) [ 213.490000] [<c035cf20>] (drm_gem_cma_create_with_handle) from [<c035d088>] (drm_gem_cma_dumb_create+0x3c/0x48) [ 213.490000] [<c035d088>] (drm_gem_cma_dumb_create) from [<c0341ed8>] (drm_ioctl+0x12c/0x444) [ 213.490000] [<c0341ed8>] (drm_ioctl) from [<c0121adc>] (do_vfs_ioctl+0x3f4/0x614) [ 213.490000] [<c0121adc>] (do_vfs_ioctl) from [<c0121d30>] (SyS_ioctl+0x34/0x5c) [ 213.490000] [<c0121d30>] (SyS_ioctl) from [<c000f2c0>] (ret_fast_syscall+0x0/0x34) UBIFS is using PagePrivate() which can have different meanings across filesystems. Therefore the generic page migration code cannot handle this case correctly. We have to implement our own migration function which basically does a plain copy but also duplicates the page private flag. UBIFS is not a block device filesystem and cannot use buffer_migrate_page(). Signed-off-by:
Kirill A. Shutemov <kirill.shutemov@linux.intel.com> [rw: Massaged changelog, build fixes, etc...] Signed-off-by:
Richard Weinberger <richard@nod.at> Acked-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Richard Weinberger authored
commit 1118dce7 upstream. Export these symbols such that UBIFS can implement ->migratepage. Signed-off-by:
-
Harvey Hunt authored
commit 4b2312bd upstream. When allocating a new device IRQ, gic_dev_domain_alloc() correctly calls irq_domain_set_hwirq_and_chip(), but gic_irq_domain_alloc() does not. This means that gic_irq_domain believes all IRQs from the dev domain have an hwirq of 0 and creates incorrect mappings in the linear_revmap. As gic_irq_domain is a parent of the gic_dev_domain, this leads to an inability to boot on devices with a GIC. Excerpt of the error: [ 2.297649] irq 0: nobody cared (try booting with the "irqpoll" option) ... [ 2.436963] handlers: [ 2.439492] Disabling IRQ #0 Fix this by calling irq_domain_set_hwirq_and_chip() for both the dev and irq domain. Now that we are modifying the parent domain, be sure to clear it up in case of an allocation error. Fixes: c98c1822 ("irqchip/mips-gic: Add device hierarchy domain") Fixes: 2af70a96 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by:
Harvey Hunt <harvey.hunt@imgtec.com> Tested-by: Govindraj Raja <Govindraj.Raja@imgtec.com> # On Pistachio SoC Reviewed-by:
Matt Redfearn <matt.redfearn@imgtec.com> Cc: linux-mips@linux-mips.org Cc: Qais Yousef <qsyousef@gmail.com> Cc: jason@lakedaemon.net Cc: marc.zyngier@arm.com Link: http://lkml.kernel.org/r/1464001552-31174-1-git-send-email-harvey.hunt@imgtec.comSigned-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
James Hogan authored
commit 797179bc upstream. Copy __kvm_mips_vcpu_run() into unmapped memory, so that we can never get a TLB refill exception in it when KVM is built as a module. This was observed to happen with the host MIPS kernel running under QEMU, due to a not entirely transparent optimisation in the QEMU TLB handling where TLB entries replaced with TLBWR are copied to a separate part of the TLB array. Code in those pages continue to be executable, but those mappings persist only until the next ASID switch, even if they are marked global. An ASID switch happens in __kvm_mips_vcpu_run() at exception level after switching to the guest exception base. Subsequent TLB mapped kernel instructions just prior to switching to the guest trigger a TLB refill exception, which enters the guest exception handlers without updating EPC. This appears as a guest triggered TLB refill on a host kernel mapped (host KSeg2) address, which is not handled correctly as user (guest) mode accesses to kernel (host) segments always generate address error exceptions. Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: kvm@vger.kernel.org Cc: linux-mips@linux-mips.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Chen-Yu Tsai authored
commit cb84f6c0 upstream. This is the same issue fixed in commit dcf5341f ("ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator"). Commit message copied: dc1sw is an on/off only regulator and as such it cannot have constraints. This is a limitation of the kernel regulator implementation which resolves supplies on the first regulator_get(), which is done after applying constraints, and applying the constrains will fail because it calls _regulator_get_voltage() and _regulator_do_set_voltage() both of which will fail on a switch regulator when there is no supply (yet). This causes registering of all axp22x regulators to fail with the following errors: [ 1.395249] vcc-lcd: failed to get the current voltage(-22) [ 1.405131] axp20x-regulator axp20x-regulator: Failed to register dc1sw [ 1.412436] axp20x-regulator: probe of axp20x-regulator failed with error -22 This commit removes the constrains on dc1sw / vcc-lcd fixing this problem. Note that dcdc1 itself is contrained to the exact same values, so this does not change anything. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Chen-Yu Tsai <wens@csie.org> Acked-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Olof Johansson <olof@lixom.net> Signed-off-by:
-
Chen-Yu Tsai authored
commit b223d624 upstream. This is the same issue fixed in commit dcf5341f ("ARM: dts: sun8i-q8-common: Do not set constraints on dc1sw regulator"). Commit message copied: dc1sw is an on/off only regulator and as such it cannot have constraints. This is a limitation of the kernel regulator implementation which resolves supplies on the first regulator_get(), which is done after applying constraints, and applying the constrains will fail because it calls _regulator_get_voltage() and _regulator_do_set_voltage() both of which will fail on a switch regulator when there is no supply (yet). This causes registering of all axp22x regulators to fail with the following errors: [ 1.395249] vcc-lcd: failed to get the current voltage(-22) [ 1.405131] axp20x-regulator axp20x-regulator: Failed to register dc1sw [ 1.412436] axp20x-regulator: probe of axp20x-regulator failed with error -22 This commit removes the constrains on dc1sw / vcc-lcd fixing this problem. Note that dcdc1 itself is contrained to the exact same values, so this does not change anything. Cc: Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Steve Capper authored
commit 56530f5d upstream. Currently pmd_mknotpresent will use a zero entry to respresent an invalidated pmd. Unfortunately this definition clashes with pmd_none, thus it is possible for a race condition to occur if zap_pmd_range sees pmd_none whilst __split_huge_pmd_locked is running too with pmdp_invalidate just called. This patch fixes the race condition by modifying pmd_mknotpresent to create non-zero faulting entries (as is done in other architectures), removing the ambiguity with pmd_none. [catalin.marinas@arm.com: using L_PMD_SECT_VALID instead of PMD_TYPE_SECT] Fixes: 8d962507 ("ARM: mm: Transparent huge page support for LPAE systems.") Reported-by:
Will Deacon <will.deacon@arm.com> Cc: Russell King <linux@armlinux.org.uk> Signed-off-by:
Steve Capper <steve.capper@arm.com> Signed-off-by:
Catalin Marinas <catalin.marinas@arm.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Will Deacon authored
commit 62453188 upstream. In a subsequent patch, pmd_mknotpresent will clear the valid bit of the pmd entry, resulting in a not-present entry from the hardware's perspective. Unfortunately, pmd_present simply checks for a non-zero pmd value and will therefore continue to return true even after a pmd_mknotpresent operation. Since pmd_mknotpresent is only used for managing huge entries, this is only an issue for the 3-level case. This patch fixes the 3-level pmd_present implementation to take into account the valid bit. For bisectability, the change is made before the fix to pmd_mknotpresent. [catalin.marinas@arm.com: comment update regarding pmd_mknotpresent patch] Fixes: 8d962507 ("ARM: mm: Transparent huge page support for LPAE systems.") Cc: Russell King <linux@armlinux.org.uk> Cc: Steve Capper <Steve.Capper@arm.com> Signed-off-by:
-
Fabio Estevam authored
commit 20c15226 upstream. The value used for Micrel PHY mask is not correct. Use the MICREL_PHY_ID_MASK definition instead. Thanks to Jiri Luznicky for proposing the fix at https://community.freescale.com/thread/387739 Fixes: 709bc065 ("ARM: imx6ul: add fec MAC refrence clock and phy fixup init") Signed-off-by:
Fabio Estevam <fabio.estevam@nxp.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Signed-off-by:
Shawn Guo <shawnguo@kernel.org> Signed-off-by:
-
Srinivas Kandagatla authored
commit d1e44b6b upstream. After "regulator: qcom_smd: add list_voltage callback" patch adding pm8941 lnldo regulators would bug on list_voltages as it is a fixed regulator without any linear range. This patch fixes that issue by adding dedicated ops for pm8941 lnldo without list_voltages callback. Signed-off-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Srinivas Kandagatla authored
commit a8a47540 upstream. This patch adds support to list_voltage callback, so that consumers like mmc core, can get information of supported voltage range. Without this patch there is no way for mmc core to know this voltage range. Signed-off-by:
-
J. Bruce Fields authored
commit 39a9beab upstream. The spec allows backchannels for multiple clients to share the same tcp connection. When that happens, we need to use the same xprt for all of them. Similarly, we need the same xps. This fixes list corruption introduced by the multipath code. Signed-off-by:
J. Bruce Fields <bfields@redhat.com> Acked-by:
Trond Myklebust <trondmy@primarydata.com> Signed-off-by:
-
J. Bruce Fields authored
commit 1208fd56 upstream. Callers of rpc_create_xprt expect it to put the xprt on success and failure. Signed-off-by:
-
Trond Myklebust authored
commit e547f262 upstream. Olga Kornievskaia reports that the following test fails to trigger an OPEN_DOWNGRADE on the wire, and only triggers the final CLOSE. fd0 = open(foo, RDRW) -- should be open on the wire for "both" fd1 = open(foo, RDONLY) -- should be open on the wire for "read" close(fd0) -- should trigger an open_downgrade read(fd1) close(fd1) The issue is that we're missing a check for whether or not the current state transitioned from an O_RDWR state as opposed to having transitioned from a combination of O_RDONLY and O_WRONLY. Reported-by:
Olga Kornievskaia <aglo@umich.edu> Fixes: cd9288ff ("NFSv4: Fix another bug in the close/open_downgrade code") Signed-off-by:
Trond Myklebust <trond.myklebust@primarydata.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com> Signed-off-by:
-
Al Viro authored
commit d20cb71d upstream. In "NFSv4: Move dentry instantiation into the NFSv4-specific atomic open code" unconditional d_drop() after the ->open_context() had been removed. It had been correct for success cases (there ->open_context() itself had been doing dcache manipulations), but not for error ones. Only one of those (ENOENT) got a compensatory d_drop() added in that commit, but in fact it should've been done for all errors. As it is, the case of O_CREAT non-exclusive open on a hashed negative dentry racing with e.g. symlink creation from another client ended up with ->open_context() getting an error and proceeding to call nfs_lookup(). On a hashed dentry, which would've instantly triggered BUG_ON() in d_materialise_unique() (or, these days, its equivalent in d_splice_alias()). Tested-by:
Oleg Drokin <green@linuxhacker.ru> Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Trond Myklebust authored
commit cbebaf89 upstream. Since commit 0bcbf039, nfs_readpage_release() has been used to unlock the page in the read code. Fixes: 0bcbf039 ("nfs: handle request add failure properly") Signed-off-by:
-
Weston Andros Adamson authored
commit 5e3a9888 upstream. pnfs_generic_commit_cancel_empty_pagelist calls nfs_commitdata_release, but that is wrong: nfs_commitdata_release puts the open context, something that isn't valid until nfs_init_commit is called, which is never the case when pnfs_generic_commit_cancel_empty_pagelist is called. This was introduced in "nfs: avoid race that crashes nfs_init_commit". Signed-off-by:
Weston Andros Adamson <dros@primarydata.com> Signed-off-by:
-
Ben Hutchings authored
commit 99965378 upstream. Use set_posix_acl, which includes proper permission checks, instead of calling ->set_acl directly. Without this anyone may be able to grant themselves permissions to a file by setting the ACL. Lock the inode to make the new checks atomic with respect to set_acl. (Also, nfsd was the only caller of set_acl not locking the inode, so I suspect this may fix other races.) This also simplifies the code, and ensures our ACLs are checked by posix_acl_valid. The permission checks and the inode locking were lost with commit 4ac7249e, which changed nfsd to use the set_acl inode operation directly instead of going through xattr handlers. Reported-by:
David Sinquin <david@sinquin.eu> [agreunba@redhat.com: use set_posix_acl] Fixes: 4ac7249e Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Andreas Gruenbacher authored
commit 485e71e8 upstream. Factor out part of posix_acl_xattr_set into a common function that takes a posix_acl, which nfsd can also call. The prototype already exists in include/linux/posix_acl.h. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Cc: Christoph Hellwig <hch@infradead.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
-
Oleg Drokin authored
commit 5cc1fb2a upstream. To avoid racing entry into nfs4_get_vfs_file(). Make init_open_stateid() return with locked stateid to be unlocked by the caller. Signed-off-by:
-
Oleg Drokin authored
commit feb9dad5 upstream. It used to be the case that state had an rwlock that was locked for write by downgrades, but for read for upgrades (opens). Well, the problem is if there are two competing opens for the same state, they step on each other toes potentially leading to leaking file descriptors from the state structure, since access mode is a bitmap only set once. Signed-off-by:
-
J. Bruce Fields authored
commit d50039ea upstream. Also simplify the logic a bit. Signed-off-by:
-
Martin K. Petersen authored
commit 6b7e9cde upstream. For historic reasons, io_opt is in bytes and max_sectors in block layer sectors. This interface inconsistency is error prone and should be fixed. But for 4.4--4.7 let's make the unit difference explicit via a wrapper function. Fixes: d0eb20a8 ("sd: Optimal I/O size is in bytes, not sectors") Reported-by:
Fam Zheng <famz@redhat.com> Reviewed-by:
Bart Van Assche <bart.vanassche@sandisk.com> Reviewed-by:
Andrew Patterson <andrew.patterson@hpe.com> Signed-off-by:
Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by:
-
Tejun Heo authored
commit 62a584fe upstream. As vm.dirty_[background_]bytes can't be applied verbatim to multiple cgroup writeback domains, they get converted to percentages in domain_dirty_limits() and applied the same way as vm.dirty_[background]ratio. However, if the specified bytes is lower than 1% of available memory, the calculated ratios become zero and the writeback domain gets throttled constantly. Fix it by using per-PAGE_SIZE instead of percentage for ratio calculations. Also, the updated DIV_ROUND_UP() usages now should yield 1/4096 (0.0244%) as the minimum ratio as long as the specified bytes are above zero. Signed-off-by:
Tejun Heo <tj@kernel.org> Reported-by:
Miao Xie <miaoxie@huawei.com> Link: http://lkml.kernel.org/g/57333E75.3080309@huawei.com Fixes: 9fc3a43e ("writeback: separate out domain_dirty_limits()") Reviewed-by:
Jan Kara <jack@suse.cz> Signed-off-by:
Jens Axboe <axboe@fb.com>
-
Lukasz Luba authored
commit f840ab18 upstream. The freq_table array is not populated before calling thermal_of_cooling_register. The code which populates the freq table was introduced in commit f6859014. This should be done before registering new thermal cooling device. The log shows effects of this wrong decision. [ 2.172614] cpu cpu1: Failed to get voltage for frequency 1984518656000: -34 [ 2.220863] cpu cpu0: Failed to get voltage for frequency 1984524416000: -34 Fixes: f6859014 ("thermal: cpu_cooling: Store frequencies in descending order") Signed-off-by:
Lukasz Luba <lukasz.luba@arm.com> Acked-by:
Javi Merino <javi.merino@arm.com> Acked-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Zhang Rui <rui.zhang@intel.com> Signed-off-by:
-
Andy Lutomirski authored
commit a44323e2 upstream. The current code goes through a lot of indirection just to call a known handler. Simplify it: just call the handlers directly. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
-
Larry Finger authored
commit de26859d upstream. Commit 49f86ec2 ("rtlwifi: Change long delays to sleeps") was correct for most cases; however, driver rtl8192ce calls the affected routines while in atomic context. The kernel bug output is as follows: BUG: scheduling while atomic: wpa_supplicant/627/0x00000002 [...] [<ffffffff815c2b39>] __schedule+0x899/0xad0 [<ffffffff815c2dac>] schedule+0x3c/0x90 [<ffffffff815c5bb2>] schedule_hrtimeout_range_clock+0xa2/0x120 [<ffffffff810e8b80>] ? hrtimer_init+0x120/0x120 [<ffffffff815c5ba6>] ? schedule_hrtimeout_range_clock+0x96/0x120 [<ffffffff815c5c43>] schedule_hrtimeout_range+0x13/0x20 [<ffffffff815c568f>] usleep_range+0x4f/0x70 [<ffffffffa0667218>] rtl_rfreg_delay+0x38/0x50 [rtlwifi] [<ffffffffa06dd0e7>] rtl92c_phy_config_rf_with_headerfile+0xc7/0xe0 [rtl8192ce] To fix this bug, three of the changes from delay to sleep are reverted. Unfortunately, one of the changes involves a delay of 50 msec. The calling code will be modified so that this long delay can be avoided; however, this change is being pushed now to fix the problem in kernel 4.6.0. Fixes: 49f86ec2 ("rtlwifi: Change long delays to sleeps") Reported-by:
James Feeney <james@nurealm.net> Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Cc: James Feeney <james@nurealm.net> Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Al Viro authored
commit e6ec03a2 upstream. It's an analogue of commit 7500c38a (fix the braino in "namei: massage lookup_slow() to be usable by lookup_one_len_unlocked()"). The same problem (->lookup()-returned unhashed negative dentry just might be an autofs one with ->d_manage() that would wait until the daemon makes it positive) applies in do_last() - we need to do follow_managed() first. Fortunately, remaining callers of follow_managed() are OK - only autofs has that weirdness (negative dentry that does not mean an instant -ENOENT)) and autofs never has its negative dentries hashed, so we can't pick one from a dcache lookup. ->d_manage() is a bloody mess ;-/ Spotted-by:
Ian Kent <raven@themaw.net> Signed-off-by:
-
Johan Hovold authored
commit 85b03b30 upstream. This reverts commit 923b93e4. Make sure consumers do not overwrite gpio flags for pins that have already been claimed. While adding support for gpio drivers to refuse a request using unsupported flags, the order of when the requested flag was checked and the new flags were applied was reversed to that consumers could overwrite flags for already requested gpios. This not only affects device-tree setups where two drivers could request the same gpio using conflicting configurations, but also allowed user space to clear gpio flags for already claimed pins simply by attempting to export them through the sysfs interface. By for example clearing the FLAG_ACTIVE_LOW flag this way, user space could effectively change the polarity of a signal. Reverting this change obviously prevents gpio drivers from doing sanity checks on the flags in their request callbacks. Fortunately only one recently added driver (gpio-tps65218 in v4.6) appears to do this, and a follow up patch could restore this functionality through a different interface. Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
Colin Pitrat authored
commit 87041a58 upstream. This fixes the issue descirbe in bug 117531 (https://bugzilla.kernel.org/show_bug.cgi?id=117531). It's a regression introduced in linux 4.5 that causes a Oops at load of gpio_sch and prevents powering off the computer. The issue is that sch_gpio_reg_set is called in sch_gpio_probe before gpio_chip data is initialized with the pointer to the sch_gpio struct. As sch_gpio_reg_set calls gpiochip_get_data, it returns NULL which causes the Oops. The patch follows Mika's advice (https://lkml.org/lkml/2016/5/9/61) and consists in modifying sch_gpio_reg_get and sch_gpio_reg_set to take a sch_gpio struct directly instead of a gpio_chip, which avoids the call to gpiochip_get_data. Thanks Mika for your patience with me :-) Signed-off-by:
Colin Pitrat <colin.pitrat@gmail.com> Acked-by:
Alexandre Courbot <acourbot@nvidia.com> Acked-by:
Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by:
-
Linus Walleij authored
commit c0a1ecb9 upstream. Most functions that take a GPIO descriptor in need to check the descriptor for IS_ERR(). We do this mostly in the VALIDATE_DESC() macro except for the gpiod_to_irq() function which needs special handling. Reported-by:
Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by:
-
Roger Quadros authored
commit 62e6d1e5 upstream. If USB cable is connected prior to boot, we don't get any interrupts so we must manually check the VBUS state and report it during probe. If we don't do it then USB controller will never know that peripheral cable was connected till the user unplugs and replugs the cable. Fixes: b7aad8e2 ("extcon: palmas: Add the support for VBUS detection by using GPIO") Signed-off-by:
Roger Quadros <rogerq@ti.com> Signed-off-by:
Chanwoo Choi <cw00.choi@samsung.com> Signed-off-by:
-
Josh Poimboeuf authored
commit fc188225 upstream. A basic perf callgraph record operation causes an immediate panic on a 32-bit kernel compiled with CONFIG_CC_STACKPROTECTOR=y: $ perf record -g ls Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0404fbd CPU: 0 PID: 998 Comm: ls Not tainted 4.7.0-rc5+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 c0dd5967 ff7afe1c 00000086 f41dbc2c c07445a0 464c457f f41dbca8 f41dbc44 c05646f4 f41dbca8 464c457f f41dbca8 464c457f f41dbc54 c04625be c0ce56fc c0404fbd f41dbc88 c0404fbd b74668f0 f41dc000 00000000 c0000000 00000000 Call Trace: [<c07445a0>] dump_stack+0x58/0x78 [<c05646f4>] panic+0x8e/0x1c6 [<c04625be>] __stack_chk_fail+0x1e/0x30 [<c0404fbd>] ? perf_callchain_user+0x22d/0x230 [<c0404fbd>] perf_callchain_user+0x22d/0x230 [<c055f89f>] get_perf_callchain+0x1ff/0x270 [<c055f988>] perf_callchain+0x78/0x90 [<c055c7eb>] perf_prepare_sample+0x24b/0x370 [<c055c934>] perf_event_output_forward+0x24/0x70 [<c05531c0>] __perf_event_overflow+0xa0/0x210 [<c0550a93>] ? cpu_clock_event_read+0x43/0x50 [<c0553431>] perf_swevent_hrtimer+0x101/0x180 [<c0456235>] ? kmap_atomic_prot+0x35/0x140 [<c056dc69>] ? get_page_from_freelist+0x279/0x950 [<c058fdd8>] ? vma_interval_tree_remove+0x158/0x230 [<c05939f4>] ? wp_page_copy.isra.82+0x2f4/0x630 [<c05a050d>] ? page_add_file_rmap+0x1d/0x50 [<c0565611>] ? unlock_page+0x61/0x80 [<c0566755>] ? filemap_map_pages+0x305/0x320 [<c059769f>] ? handle_mm_fault+0xb7f/0x1560 [<c074cbeb>] ? timerqueue_del+0x1b/0x70 [<c04cfefe>] ? __remove_hrtimer+0x2e/0x60 [<c04d017b>] __hrtimer_run_queues+0xcb/0x2a0 [<c0553330>] ? __perf_event_overflow+0x210/0x210 [<c04d0a2a>] hrtimer_interrupt+0x8a/0x180 [<c043ecc2>] local_apic_timer_interrupt+0x32/0x60 [<c043f643>] smp_apic_timer_interrupt+0x33/0x50 [<c0b0cd38>] apic_timer_interrupt+0x34/0x3c Kernel Offset: disabled ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0404fbd The panic is caused by the fact that perf_callchain_user() mistakenly assumes it's 64-bit only and ends up corrupting the stack. Signed-off-by:
Josh Poimboeuf <jpoimboe@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Fixes: 75925e1a ("perf/x86: Optimize stack walk user accesses") Link: http://lkml.kernel.org/r/1a547f5077ec30f75f9b57074837c3c80df86e5e.1467432113.git.jpoimboe@redhat.comSigned-off-by:
-
Borislav Petkov authored
commit 1ead852d upstream. Fix boot crash that triggers if this driver is built into a kernel and run on non-AMD systems. AMD northbridges users call amd_cache_northbridges() and it returns a negative value to signal that we weren't able to cache/detect any northbridges on the system. At least, it should do so as all its callers expect it to do so. But it does return a negative value only when kmalloc() fails. Fix it to return -ENODEV if there are no NBs cached as otherwise, amd_nb users like amd64_edac, for example, which relies on it to know whether it should load or not, gets loaded on systems like Intel Xeons where it shouldn't. Reported-and-tested-by:
Tony Battersby <tonyb@cybernetics.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1466097230-5333-2-git-send-email-bp@alien8.de Link: https://lkml.kernel.org/r/5761BEB0.9000807@cybernetics.comSigned-off-by:
-
Vincent Stehlé authored
commit 275ae411 upstream. On rapl cleanup path, kfree() is given by mistake the address of the pointer of the structure to free (rapl_pmus->pmus + i). Pass the pointer instead (rapl_pmus->pmus[i]). Fixes: 9de8d686 "perf/x86/intel/rapl: Convert it to a per package facility" Signed-off-by:
Vincent Stehlé <vincent.stehle@intel.com> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1464101629-14905-1-git-send-email-vincent.stehle@intel.comSigned-off-by:
-
Masami Hiramatsu authored
commit dcfc4724 upstream. Fix kprobe_fault_handler() to clear the TF (trap flag) bit of the flags register in the case of a fault fixup on single-stepping. If we put a kprobe on the instruction which caused a page fault (e.g. actual mov instructions in copy_user_*), that fault happens on the single-stepping buffer. In this case, kprobes resets running instance so that the CPU can retry execution on the original ip address. However, current code forgets to reset the TF bit. Since this fault happens with TF bit set for enabling single-stepping, when it retries, it causes a debug exception and kprobes can not handle it because it already reset itself. On the most of x86-64 platform, it can be easily reproduced by using kprobe tracer. E.g. # cd /sys/kernel/debug/tracing # echo p copy_user_enhanced_fast_string+5 > kprobe_events # echo 1 > events/kprobes/enable And you'll see a kernel panic on do_debug(), since the debug trap is not handled by kprobes. To fix this problem, we just need to clear the TF bit when resetting running kprobe. Signed-off-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Ananth N Mavinakayanahalli <ananth@linux.vnet.ibm.com> Acked-by:
Steven Rostedt <rostedt@goodmis.org> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vince Weaver <vincent.weaver@maine.edu> Cc: systemtap@sourceware.org Link: http://lkml.kernel.org/r/20160611140648.25885.37482.stgit@devbox [ Updated the comments. ] Signed-off-by:
-
H. Peter Anvin authored
commit 9c77679c upstream. For newer versions of Syslinux, we need ldlinux.c32 in addition to isolinux.bin to reside on the boot disk, so if the latter is found, copy it, too, to the isoimage tree. Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Signed-off-by:
-
