- 04 Jun, 2021 1 commit
-
-
Oder Chiou authored
Based on ("5a15cd7f"), the setting also should be set in soundwire mode. Signed-off-by:Oder Chiou <oder_chiou@realtek.com> Link: https://lore.kernel.org/r/20210604063150.29925-1-oder_chiou@realtek.comSigned-off-by:
Mark Brown <broonie@kernel.org>
-
- 03 Jun, 2021 3 commits
-
-
Richard Weinberger authored
TAS2562_TDM_CFG0_SAMPRATE_MASK starts at bit 1, not 0. So all values need to be left shifted by 1. Signed-off-by:
Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/r/20210530203446.19022-1-richard@nod.atSigned-off-by:
-
Jerome Brunet authored
There is a fair amount of warnings when running 'make dtbs_check' with amlogic,gx-sound-card.yaml. Ex: arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:1: missing phandle tag in 0 arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0:2: missing phandle tag in 0 arch/arm64/boot/dts/amlogic/meson-gxm-q200.dt.yaml: sound: dai-link-0:sound-dai:0: [66, 0, 0] is too long The reason is that the sound-dai phandle provided has cells, and in such case the schema should use 'phandle-array' instead of 'phandle'. Fixes: fd00366b ("ASoC: meson: gx: add sound card dt-binding documentation") Signed-off-by:
Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20210524093448.357140-1-jbrunet@baylibre.comSigned-off-by:
-
Mark Pearson authored
Unfortunately the previous patch to fix issues using the AMD ACP bridge has the side effect of breaking the dmic in other cases and needs to be reverted. Removing the changes while we revisit the fix and find something better. Apologies for the churn. Suggested-by:
Gabriel Craciunescu <unix.or.die@gmail.com> Signed-off-by:
Mark Pearson <markpearson@lenovo.com> Link: https://lore.kernel.org/r/20210602171251.3243-1-markpearson@lenovo.comSigned-off-by:
-
- 02 Jun, 2021 1 commit
-
-
Mark Pearson authored
More laptops identified where the AMD ACP bridge needs to be blocked or the microphone will not work when connected to HDMI. Use DMI to block the microphone PCM device for these platforms. Suggested-by:
Gabriel Craciunescu <nix.or.die@gmail.com> Signed-off-by:
-
- 01 Jun, 2021 3 commits
-
-
Kai Vehmanen authored
The recent changes to use common code to power up/down DSP cores also removed the reset of the core state at suspend. It turns out this is still needed. When the firmware state is reset to SOF_FW_BOOT_NOT_STARTED, also enabled_cores should be reset, and existing DSP drivers depend on this. BugLink: https://github.com/thesofproject/linux/issues/2824 Fixes: 42077f08 ("ASoC: SOF: update dsp core power status in common APIs") Signed-off-by:
Kai Vehmanen <kai.vehmanen@linux.intel.com> Reviewed-by:
Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Reviewed-by:
Ranjani Sridharan <ranjani.sridharan@linux.intel.com> Link: https://lore.kernel.org/r/20210528144330.2551-1-kai.vehmanen@linux.intel.comSigned-off-by:
-
Nicolas Cavallari authored
Otherwise, when compiled as module, a WARN_ON is triggered: WARNING: CPU: 0 PID: 5 at sound/core/init.c:208 snd_card_new+0x310/0x39c [snd] [...] CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.10.39 #1 Hardware name: Freescale i.MX6 Quad/DualLite (Device Tree) Workqueue: events deferred_probe_work_func [<c0111988>] (unwind_backtrace) from [<c010c8ac>] (show_stack+0x10/0x14) [<c010c8ac>] (show_stack) from [<c092784c>] (dump_stack+0xdc/0x104) [<c092784c>] (dump_stack) from [<c0129710>] (__warn+0xd8/0x114) [<c0129710>] (__warn) from [<c0922a48>] (warn_slowpath_fmt+0x5c/0xc4) [<c0922a48>] (warn_slowpath_fmt) from [<bf0496f8>] (snd_card_new+0x310/0x39c [snd]) [<bf0496f8>] (snd_card_new [snd]) from [<bf1d7df8>] (snd_soc_bind_card+0x334/0x9c4 [snd_soc_core]) [<bf1d7df8>] (snd_soc_bind_card [snd_soc_core]) from [<bf1e9cd8>] (devm_snd_soc_register_card+0x30/0x6c [snd_soc_core]) [<bf1e9cd8>] (devm_snd_soc_register_card [snd_soc_core]) from [<bf22d964>] (fsl_asoc_card_probe+0x550/0xcc8 [snd_soc_fsl_asoc_card]) [<bf22d964>] (fsl_asoc_card_probe [snd_soc_fsl_asoc_card]) from [<c060c930>] (platform_drv_probe+0x48/0x98) [...] Signed-off-by:
Nicolas Cavallari <nicolas.cavallari@green-communications.fr> Acked-by:
Shengjiu Wang <shengjiu.wang@gmail.com> Link: https://lore.kernel.org/r/20210527163409.22049-1-nicolas.cavallari@green-communications.frSigned-off-by:
-
Colin Ian King authored
There are spelling mistakes in comments. Fix them. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20210601103506.9477-1-colin.king@canonical.comSigned-off-by:
-
- 27 May, 2021 1 commit
-
-
Jack Yu authored
The power of "LDO2", "MICBIAS1" and "Mic Det Power" were powered off after the DAPM widgets were added, and these powers were set by the JD settings "RT5659_JD_HDA_HEADER" in the probe function. In the codec probe function, these powers were ignored to prevent them controlled by DAPM. Signed-off-by:
Jack Yu <jack.yu@realtek.com> Message-Id: <15fced51977b458798ca4eebf03dafb9@realtek.com> Signed-off-by:
-
- 24 May, 2021 1 commit
-
-
Kefeng Wang authored
Check the return value of devm_kstrdup() in case of Null-point-dereference. Fixes: 45dd9943 ("ASoC: core: remove artificial component and DAI name constraint") Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Reported-by:
Hulk Robot <hulkci@huawei.com> Signed-off-by:
Kefeng Wang <wangkefeng.wang@huawei.com> Link: https://lore.kernel.org/r/20210524024941.159952-1-wangkefeng.wang@huawei.comSigned-off-by:
-
- 21 May, 2021 1 commit
-
-
Stephen Boyd authored
This driver spits out a warning for me at boot: sc7180-lpass-cpu 62f00000.lpass: asoc_qcom_lpass_cpu_platform_probe() error getting optional null: -2 but it looks like it is all an optional clk. Use the optional clk APIs here so that we don't see this message and everything else is the same. Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Banajit Goswami <bgoswami@codeaurora.org> Fixes: 3e53ac82 ("ASoC: qcom: make osr clock optional") Signed-off-by:
Stephen Boyd <swboyd@chromium.org> Reviewed-by:
Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Link: https://lore.kernel.org/r/20210520014807.3749797-1-swboyd@chromium.orgSigned-off-by:
-
- 20 May, 2021 1 commit
-
-
Dan Carpenter authored
This error path returns zero (success) but it should return -EINVAL. Fixes: 3333cb71 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Reviewed-by:
Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/YKXuyGEzhPT35R3G@mwandaSigned-off-by:
-
- 19 May, 2021 1 commit
-
-
Ranjani Sridharan authored
BE hw_params op was recently added for SSP type DAIs. But sending the DAI_CONFIG IPC during hw_params is not supported with older firmware. So add an ABI check to avoid sending the IPC if the firmware ABI is older than 3.18. Fixes: e12be9fb ('ASoC: SOF: Intel: HDA: add hw params callback for SSP DAIs') Tested-by:
Yong Zhi <yong.zhi@intel.com> Reviewed-by:
-
- 18 May, 2021 1 commit
-
-
Arnd Bergmann authored
Kconfig produces a warning with SND_SOC_FSL_RPMSG=y and SND_IMX_SOC=m: WARNING: unmet direct dependencies detected for SND_SOC_IMX_RPMSG Depends on [m]: SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && SND_IMX_SOC [=m] && RPMSG [=y] Selected by [y]: - SND_SOC_FSL_RPMSG [=y] && SOUND [=y] && !UML && SND [=y] && SND_SOC [=y] && COMMON_CLK [=y] && RPMSG [=y] && SND_IMX_SOC [=m]!=n Add a dependency to prevent this configuration. Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
-
- 12 May, 2021 7 commits
-
-
Charles Keepax authored
Fixup a needlessly initialised variable and an unchecked return value. Reported-by:
-
Charles Keepax authored
This device requires single register transactions, this will definely cause problems with the new device ID parsing which uses regmap_bulk_read but might also show up in the cache sync sometimes. Add the missing flags to the regmap_config. Fixes: 283160f1 ("ASoC: cs35l32: Minor error paths fixups") Signed-off-by:
-
Charles Keepax authored
This device requires single register transactions, this will definely cause problems with the new device ID parsing which uses regmap_bulk_read but might also show up in the cache sync sometimes. Add the missing flags to the regmap_config. Fixes: 8cb9b001 ("ASoC: cs35l34: Minor error paths fixups") Signed-off-by:
-
Charles Keepax authored
This device requires single register transactions, this will definely cause problems with the new device ID parsing which uses regmap_bulk_read but might also show up in the cache sync sometimes. Add the missing flags to the regmap_config. Fixes: 26495252 ("ASoC: cs42l73: Minor error paths fixups") Signed-off-by:
-
Charles Keepax authored
This device requires single register transactions, this will definely cause problems with the new device ID parsing which uses regmap_bulk_read but might also show up in the cache sync sometimes. Add the missing flags to the regmap_config. Fixes: 4fc81bc8 ("ASoC: cs53l30: Minor error paths fixups") Signed-off-by:
-
Zou Wei authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by:
Zou Wei <zou_wei@huawei.com> Link: https://lore.kernel.org/r/1620789145-14936-1-git-send-email-zou_wei@huawei.comSigned-off-by:
-
Kuninori Morimoto authored
Let's use "consumer" instead of "follower". Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
-
- 11 May, 2021 8 commits
-
-
Mark Brown authored
Merge series "ASoC: simple-card / audio-graph re-cleanup" from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>: Hi Mark, Guillaume I'm so sorry to bother you again and again. These are v2 of simple-card / audio-graph re-cleanup. KernelCI had reported that below patches broke kontron-sl28-var3-ads2 sound card probing. 43439227 "ASoC: simple-card: add simple_link_init()" 59c35c44 "ASoC: simple-card: add simple_parse_node()" Main issue I'm understanding is name create timing. We want to create dailink->name via dlc->dai_name. But in CPU case, this dai_name might be removed by asoc_simple_canonicalize_cpu() if it CPU was single DAI. Thus, we need to A) get dlc->dai_name B) create dailink->name via dlc->dai_name C) call asoc_simple_canonicalize_cpu() Above reverted patch did A->C->B. My previous v1 patch did B->A->C. I'm so sorry that I didn't deep test on v1. I hope v2 patches has no issues on kontron-sl28-var3-ads2. Link: https://lore.kernel.org/r/87cztzcq56.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/87h7k0i437.wl-kuninori.morimoto.gx@renesas.com Link: https://lore.kernel.org/r/20210423175318.13990-1-broonie@kernel.org Link: https://lore.kernel.org/r/3ca62063-41b4-c25b-a7bc-8a8160e7b684@collabora.com Kuninori Morimoto (4): ASoC: simple-card: add simple_parse_node() ASoC: simple-card: add simple_link_init() ASoC: audio-graph: tidyup graph_dai_link_of_dpcm() ASoC: audio-graph: tidyup graph_parse_node() sound/soc/generic/audio-graph-card.c | 57 ++++----- sound/soc/generic/simple-card.c | 168 +++++++++++++-------------- 2 files changed, 112 insertions(+), 113 deletions(-) -- 2.25.1
-
Richard Fitzgerald authored
cs42l42 does not support standard burst transfers so the use_single_read and use_single_write flags must be set in the regmap config. Because of this bug, the patch: commit 0a0eb567 ("ASoC: cs42l42: Minor error paths fixups") broke cs42l42 probe() because without the use_single_* flags it causes regmap to issue a burst read. However, the missing use_single_* could cause problems anyway because the regmap cache can attempt burst transfers if these flags are not set. Fixes: 2c394ca7 ("ASoC: Add support for CS42L42 codec") Signed-off-by:
Richard Fitzgerald <rf@opensource.cirrus.com> Acked-by:
-
Kuninori Morimoto authored
audio-graph is using cpus->dai_name / codecs->dai_name for dailink->name. In graph_parse_node(), xxx->dai_name is got by snd_soc_get_dai_name(), but it might be removed soon by asoc_simple_canonicalize_cpu(). The order should be *1) call snd_soc_get_dai_name() 2) create dailink name *3) call asoc_simple_canonicalize_cpu() * are implemented in graph_parse_node(). This patch remove 3) from graph_parse_node() Reported-by:
"kernelci.org bot" <bot@kernelci.org> Fixes: 8859f809 ("ASoC: audio-graph: add graph_parse_node()") Fixes: e51237b8 ("ASoC: audio-graph: add graph_link_init()") Signed-off-by:
Michael Walle <michael@walle.cc> Link: https://lore.kernel.org/r/87cztyawzr.wl-kuninori.morimoto.gx@renesas.comSigned-off-by:
-
Kuninori Morimoto authored
Use local variable at local area only. Signed-off-by:
-
Hans de Goede authored
The Lenovo Miix 3-830 tablet has only 1 speaker, has an internal analog mic on IN1 and uses JD2 for jack-detect, add a quirk to automatically apply these settings on Lenovo Miix 3-830 tablets. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20210508150146.28403-2-hdegoede@redhat.comSigned-off-by:
-
Hans de Goede authored
Add a quirk for the Glavey TM800A550L tablet, this BYTCR tablet has no CHAN package in its ACPI tables and uses SSP0-AIF1 rather then SSP0-AIF2 which is the default for BYTCR devices. Signed-off-by:
-
Kuninori Morimoto authored
Original commit 43439227 ("ASoC: simple-card: add simple_link_init()") are rejected, and this is remake version of it. This patch adds simple_link_init() and share dai_link setting code. Reported-by:
-
Kuninori Morimoto authored
Original commit 59c35c44 ("ASoC: simple-card: add simple_parse_node()") was reverted, and this is remake version. Parse dai/tdm/clk are common for both CPU/Codec node. This patch creates simple_parse_node() for it and share the code. Reported-by:
-
- 10 May, 2021 3 commits
-
-
Shengjiu Wang authored
Correct the dai name for ak5552. The name should be "ak5552-aif". Fixes: d8c5c82e ("ASoC: ak5558: Add support for ak5552") Signed-off-by:
Shengjiu Wang <shengjiu.wang@nxp.com> Link: https://lore.kernel.org/r/1620470807-12056-1-git-send-email-shengjiu.wang@nxp.comSigned-off-by:
-
Bixuan Cui authored
This patch adds missing MODULE_DEVICE_TABLE definition which generates correct modalias for automatic loading of this driver when it is built as an external module. Reported-by:
Bixuan Cui <cuibixuan@huawei.com> Reviewed-by:
-
Srinivas Kandagatla authored
Fix module loading by adding missing MODULE_DEVICE_TABLE. Signed-off-by:
-
- 05 May, 2021 1 commit
-
-
Shuming Fan authored
The function number should be FUNC_NUM_MIC_ARRAY(0x2) for the feature unit 0x1E. Fixes: ca5118c0 ('ASoC: rt711-sdca: change capture switch controls') Signed-off-by:
Shuming Fan <shumingf@realtek.com> Link: https://lore.kernel.org/r/20210504100424.8760-1-shumingf@realtek.comSigned-off-by:
-
- 28 Apr, 2021 4 commits
-
-
Mark Brown authored
There is problem with clk_hw_get_hw(). Using it pins the clock provider to itself, making it impossible to remove the related module. Revert the two commits using this function until this gets sorted out. Jerome Brunet (2): ASoC: stm32: do not request a new clock consummer reference ASoC: da7219: do not request a new clock consummer reference sound/soc/codecs/da7219.c | 5 +---- sound/soc/stm/stm32_sai_sub.c | 5 +---- 2 files changed, 2 insertions(+), 8 deletions(-) -- 2.31.1
-
Vijendar Mukunda authored
Below phython script throwing pcm_read() error. import subprocess p = subprocess.Popen(["aplay -t raw -D plughw:1,0 /dev/zero"], shell=True) subprocess.call(["arecord -Dhw:1,0 --dump-hw-params"], shell=True) subprocess.call(["arecord -Dhw:1,0 -fdat -d1 /dev/null"], shell=True) p.kill() Handling ACP global external interrupt enable register causing this issue. This register got updated wrongly when there is active stream causing interrupts disabled for active stream. Refactored code to handle enabling and disabling external interrupts. Signed-off-by:
Vijendar Mukunda <Vijendar.Mukunda@amd.com> Link: https://lore.kernel.org/r/1619555017-29858-1-git-send-email-Vijendar.Mukunda@amd.comSigned-off-by:
-
Jerome Brunet authored
This reverts commit 12f8127f. There is problem with clk_hw_get_hw(). Using it pins the clock provider to itself, making it impossible to remove the module. Revert commit 12f8127f ("ASoC: da7219: properly get clk from the provider") until this gets sorted out. Reported-by:
-
Jerome Brunet authored
This reverts commit 65d1cce7. There is problem with clk_hw_get_hw(). Using it pins the clock provider to itself, making it impossible to remove the module. Revert commit 65d1cce7 ("ASoC: stm32: properly get clk from the provider") until this gets sorted out. Signed-off-by:
-
- 26 Apr, 2021 1 commit
-
-
Marco Felsch authored
The ni1/ni2 ratio formula [1] uses the pclk which is the prescaled mclk. The max98088 datasheet [2] has no such formula but table-12 equals so we can assume that it is the same for both devices. While on it make use of DIV_ROUND_CLOSEST_ULL(). [1] https://datasheets.maximintegrated.com/en/ds/MAX98089.pdf; page 86 [2] https://datasheets.maximintegrated.com/en/ds/MAX98088.pdf; page 82 Signed-off-by:
Marco Felsch <m.felsch@pengutronix.de> Link: https://lore.kernel.org/r/20210423135402.32105-1-m.felsch@pengutronix.deSigned-off-by:
-
- 23 Apr, 2021 2 commits
-
-
Mark Brown authored
A KernelCI bisection identified 59c35c44 "ASoC: simple-card: add simple_parse_node()" as causing simple-card to fail to instantiate on kontron-sl28-var3-ads2 systems. Since the merge window is expected to open over the weekend drop that commit and subsequent ones which depend on it for now in case other systems are affected too. The boot log showed the error as: <4>[ 9.948821] sysfs: cannot create duplicate filename '/devices/platform/sound/(null)-wm8904-hifi' (backtrace) <3>[ 10.191982] kobject_add_internal failed for (null)-wm8904-hifi with -EEXIST, don't try to register things with the same name in the same directory. The dropped commits are: 73371bac "ASoC: audio-graph: tidyup graph_dai_link_of_dpcm()" 43439227 "ASoC: simple-card: add simple_link_init()" 59c35c44 "ASoC: simple-card: add simple_parse_node()" Reported-by:
Guillaume Tucker <guillaume.tucker@collabora.com> Reported-by:
-
Shuming Fan authored
This patch adds the return value when the volume settings were changed. The userspace application might monitor the kcontrols to check which control changed. Signed-off-by:
-
