- 16 Aug, 2019 25 commits
-
-
Yoshihiro Shimoda authored
commit 783bda5e upstream. When a USB device is connected to the host controller and the system enters suspend, the following error happens in xhci_suspend(): xhci-hcd ee000000.usb: WARN: xHC CMD_RUN timeout Since the firmware/internal CPU control the USBSTS.STS_HALT and the process speed is down when the roothub port enters U3, long delay for the handshake of STS_HALT is neeed in xhci_suspend(). So, this patch adds to set the XHCI_SLOW_SUSPEND. Fixes: 435cc113 ("usb: host: xhci-plat: set resume_quirk() for R-Car controllers") Cc: <stable@vger.kernel.org> # v4.12+ Signed-off-by:
Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Link: https://lore.kernel.org/r/1564734815-17964-1-git-send-email-yoshihiro.shimoda.uh@renesas.comSigned-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Andreas Gruenbacher authored
commit a27a0c9b upstream. It turns out that the current version of gfs2_metadata_walker suffers from multiple problems that can cause gfs2_hole_size to report an incorrect size. This will confuse fiemap as well as lseek with the SEEK_DATA flag. Fix that by changing gfs2_hole_walker to compute the metapath to the first data block after the hole (if any), and compute the hole size based on that. Fixes xfstest generic/490. Signed-off-by:
Andreas Gruenbacher <agruenba@redhat.com> Reviewed-by:
Bob Peterson <rpeterso@redhat.com> Cc: stable@vger.kernel.org # v4.18+ Signed-off-by:
-
Nick Desaulniers authored
commit b059f801 upstream. KBUILD_CFLAGS is very carefully built up in the top level Makefile, particularly when cross compiling or using different build tools. Resetting KBUILD_CFLAGS via := assignment is an antipattern. The comment above the reset mentions that -pg is problematic. Other Makefiles use `CFLAGS_REMOVE_file.o = $(CC_FLAGS_FTRACE)` when CONFIG_FUNCTION_TRACER is set. Prefer that pattern to wiping out all of the important KBUILD_CFLAGS then manually having to re-add them. Seems also that __stack_chk_fail references are generated when using CONFIG_STACKPROTECTOR or CONFIG_STACKPROTECTOR_STRONG. Fixes: 8fc5b4d4 ("purgatory: core purgatory functionality") Reported-by:
Vaibhav Rustagi <vaibhavrustagi@google.com> Suggested-by:
Peter Zijlstra <peterz@infradead.org> Suggested-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Nick Desaulniers <ndesaulniers@google.com> Signed-off-by:
-
Thomas Richter authored
commit 12a6d294 upstream. On s390 the modules loaded in memory have the text segment located after the GOT and Relocation table. This can be seen with this output: [root@m35lp76 perf]# fgrep qeth /proc/modules qeth 151552 1 qeth_l2, Live 0x000003ff800b2000 ... [root@m35lp76 perf]# cat /sys/module/qeth/sections/.text 0x000003ff800b3990 [root@m35lp76 perf]# There is an offset of 0x1990 bytes. The size of the qeth module is 151552 bytes (0x25000 in hex). The location of the GOT/relocation table at the beginning of a module is unique to s390. commit 203d8a4a ("perf s390: Fix 'start' address of module's map") adjusts the start address of a module in the map structures, but does not adjust the size of the modules. This leads to overlapping of module maps as this example shows: [root@m35lp76 perf] # ./perf report -D 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x25000) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x8000) @ 0]: x /lib/modules/.../ip6_tables.ko.xz The module qeth.ko has an adjusted start address modified to b3990, but its size is unchanged and the module ends at 0x3ff800d8990. This end address overlaps with the next modules start address of 0x3ff800d85a0. When the size of the leading GOT/Relocation table stored in the beginning of the text segment (0x1990 bytes) is subtracted from module qeth end address, there are no overlaps anymore: 0x3ff800d8990 - 0x1990 = 0x0x3ff800d7000 which is the same as 0x3ff800b2000 + 0x25000 = 0x0x3ff800d7000. To fix this issue, also adjust the modules size in function arch__fix_module_text_start(). Add another function parameter named size and reduce the size of the module when the text segment start address is changed. Output after: 0 0 0xfb0 [0xa0]: PERF_RECORD_MMAP -1/0: [0x3ff800b3990(0x23670) @ 0]: x /lib/modules/.../qeth.ko.xz 0 0 0x1050 [0xb0]: PERF_RECORD_MMAP -1/0: [0x3ff800d85a0(0x7a60) @ 0]: x /lib/modules/.../ip6_tables.ko.xz Reported-by:
Stefan Liebler <stli@linux.ibm.com> Signed-off-by:
Thomas Richter <tmricht@linux.ibm.com> Acked-by:
Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hendrik Brueckner <brueckner@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: stable@vger.kernel.org Fixes: 203d8a4a ("perf s390: Fix 'start' address of module's map") Link: http://lkml.kernel.org/r/20190724122703.3996-1-tmricht@linux.ibm.comSigned-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by:
-
Adrian Hunter authored
commit 3de7ae0b upstream. Threads synthesized from /proc have comms with a start time of zero, and not marked as "exec". Currently, there can be 2 such comms. The first is created by processing a synthesized fork event and is set to the parent's comm string, and the second by processing a synthesized comm event set to the thread's current comm string. In the absence of an "exec" comm, thread__exec_comm() picks the last (oldest) comm, which, in the case above, is the parent's comm string. For a main thread, that is very probably wrong. Use the second-to-last in that case. This affects only db-export because it is the only user of thread__exec_comm(). Example: $ sudo perf record -a -o pt-a-sleep-1 -e intel_pt//u -- sleep 1 $ sudo chown ahunter pt-a-sleep-1 Before: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1.db branches calls $ sqlite3 -header -column pt-a-sleep-1.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kthreadd 3 78 78 5 sudo 4 15180 15180 5 sudo 5 15180 15182 7 kworker/4: 6 10335 10335 8 kthreadd 7 55 55 10 systemd 8 865 865 10 systemd 9 865 875 13 perf 10 15181 15181 15 sleep 10 15181 15181 16 kworker/3: 11 14179 14179 17 kthreadd 12 29376 29376 19 systemd 13 746 746 21 systemd 14 401 401 23 systemd 15 879 879 23 systemd 16 879 945 25 kthreadd 17 556 556 27 kworker/u1 18 14136 14136 28 kworker/u1 19 15021 15021 29 kthreadd 20 509 509 31 systemd 21 836 836 31 systemd 22 836 967 33 systemd 23 1148 1148 33 systemd 24 1148 1163 35 kworker/2: 25 17988 17988 36 kworker/0: 26 13478 13478 After: $ perf script -i pt-a-sleep-1 --itrace=bep -s tools/perf/scripts/python/export-to-sqlite.py pt-a-sleep-1b.db branches calls $ sqlite3 -header -column pt-a-sleep-1b.db 'select * from comm_threads_view' comm_id command thread_id pid tid ---------- ---------- ---------- ---------- ---------- 1 swapper 1 0 0 2 rcu_sched 2 10 10 3 kswapd0 3 78 78 4 perf 4 15180 15180 4 perf 5 15180 15182 6 kworker/4: 6 10335 10335 7 kcompactd0 7 55 55 8 accounts-d 8 865 865 8 accounts-d 9 865 875 10 perf 10 15181 15181 12 sleep 10 15181 15181 13 kworker/3: 11 14179 14179 14 kworker/1: 12 29376 29376 15 haveged 13 746 746 16 systemd-jo 14 401 401 17 NetworkMan 15 879 879 17 NetworkMan 16 879 945 19 irq/131-iw 17 556 556 20 kworker/u1 18 14136 14136 21 kworker/u1 19 15021 15021 22 kworker/u1 20 509 509 23 thermald 21 836 836 23 thermald 22 836 967 25 unity-sett 23 1148 1148 25 unity-sett 24 1148 1163 27 kworker/2: 25 17988 17988 28 kworker/0: 26 13478 13478 Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Fixes: 65de51f9 ("perf tools: Identify which comms are from exec") Link: http://lkml.kernel.org/r/20190808064823.14846-1-adrian.hunter@intel.comSigned-off-by:
-
Thomas Richter authored
commit b9c0a649 upstream. During execution of command 'perf top' the error message: Not enough memory for annotating '__irf_end' symbol!) is emitted from this call sequence: __cmd_top perf_top__mmap_read perf_top__mmap_read_idx perf_event__process_sample hist_entry_iter__add hist_iter__top_callback perf_top__record_precise_ip hist_entry__inc_addr_samples symbol__inc_addr_samples symbol__get_annotation symbol__alloc_hist In this function the size of symbol __irf_end is calculated. The size of a symbol is the difference between its start and end address. When the symbol was read the first time, its start and end was set to: symbol__new: __irf_end 0xe954d0-0xe954d0 which is correct and maps with /proc/kallsyms: root@s8360046:~/linux-4.15.0/tools/perf# fgrep _irf_end /proc/kallsyms 0000000000e954d0 t __irf_end root@s8360046:~/linux-4.15.0/tools/perf# In function symbol__alloc_hist() the end of symbol __irf_end is symbol__alloc_hist sym:__irf_end start:0xe954d0 end:0x3ff80045a8 which is identical with the first module entry in /proc/kallsyms This results in a symbol size of __irf_req for histogram analyses of 70334140059072 bytes and a malloc() for this requested size fails. The root cause of this is function __dso__load_kallsyms() +-> symbols__fixup_end() Function symbols__fixup_end() enlarges the last symbol in the kallsyms map: # fgrep __irf_end /proc/kallsyms 0000000000e954d0 t __irf_end # to the start address of the first module: # cat /proc/kallsyms | sort | egrep ' [tT] ' .... 0000000000e952d0 T __security_initcall_end 0000000000e954d0 T __initramfs_size 0000000000e954d0 t __irf_end 000003ff800045a8 T fc_get_event_number [scsi_transport_fc] 000003ff800045d0 t store_fc_vport_disable [scsi_transport_fc] 000003ff800046a8 T scsi_is_fc_rport [scsi_transport_fc] 000003ff800046d0 t fc_target_setup [scsi_transport_fc] On s390 the kernel is located around memory address 0x200, 0x10000 or 0x100000, depending on linux version. Modules however start some- where around 0x3ff xxxx xxxx. This is different than x86 and produces a large gap for which histogram allocation fails. Fix this by detecting the kernel's last symbol and do no adjustment for it. Introduce a weak function and handle s390 specifics. Reported-by:
Klaus Theurich <klaus.theurich@de.ibm.com> Signed-off-by:
-
Joerg Roedel authored
commit 3f8fd02b upstream. On x86-32 with PTI enabled, parts of the kernel page-tables are not shared between processes. This can cause mappings in the vmalloc/ioremap area to persist in some page-tables after the region is unmapped and released. When the region is re-used the processes with the old mappings do not fault in the new mappings but still access the old ones. This causes undefined behavior, in reality often data corruption, kernel oopses and panics and even spontaneous reboots. Fix this problem by activly syncing unmaps in the vmalloc/ioremap area to all page-tables in the system before the regions can be re-used. References: https://bugzilla.suse.com/show_bug.cgi?id=1118689 Fixes: 5d72b4fb ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by:
Joerg Roedel <jroedel@suse.de> Signed-off-by:
Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20190719184652.11391-4-joro@8bytes.orgSigned-off-by:
-
Joerg Roedel authored
commit 8e998fc2 upstream. With huge-page ioremap areas the unmappings also need to be synced between all page-tables. Otherwise it can cause data corruption when a region is unmapped and later re-used. Make the vmalloc_sync_one() function ready to sync unmappings and make sure vmalloc_sync_all() iterates over all page-tables even when an unmapped PMD is found. Fixes: 5d72b4fb ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by:
-
Joerg Roedel authored
commit 51b75b5b upstream. Do not require a struct page for the mapped memory location because it might not exist. This can happen when an ioremapped region is mapped with 2MB pages. Fixes: 5d72b4fb ('x86, mm: support huge I/O mapping capability I/F') Signed-off-by:
-
Dmitry Torokhov authored
commit 25f8c834 upstream. The 2016 kabylake HP Spectre X360 (model number 13-w013dx) works much better with psmouse.synaptics_intertouch=1 kernel parameter, so let's enable RMI4 mode automatically. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204115Reported-by:
Nate Graham <pointedstick@zoho.com> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Kai-Heng Feng authored
commit 883a2a80 upstream. There are some new HP laptops with Elantech touchpad that don't support multitouch. Currently we use ETP_NEW_IC_SMBUS_HOST_NOTIFY() to check if SMBus is supported, but in addition to firmware version, the bus type also informs us whether the IC can support SMBus. To avoid breaking old ICs, we will only enable SMbus support based the bus type on systems manufactured after 2018. Lastly, let's consolidate all checks into elantech_use_host_notify() and use it to determine whether to use PS/2 or SMBus. Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Acked-by:
Benjamin Tissoires <benjamin.tissoires@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Oliver Neukum authored
commit b55d996f upstream. Mutexes shall be initialized before they are used. Fixes: 12e510db ("Input: usbtouchscreen - fix deadlock in autosuspend") Reported-by: syzbot+199ea16c7f26418b4365@syzkaller.appspotmail.com Signed-off-by:
Oliver Neukum <oneukum@suse.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Mikulas Patocka authored
commit d0a255e7 upstream. A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 #6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 #7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] #8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] #9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] #10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce #11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 #12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f #13 [ffff8813dedfbec0] kthread at ffffffff810a8428 #14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] #6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd #7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 #8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 #9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 #10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 #11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 #12 [ffff88272f5af760] new_slab at ffffffff811f4523 #13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 #14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b #15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 #16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 #17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] #18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 #19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] #20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] #21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] #22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c #23 [ffff88272f5afec0] kthread at ffffffff810a8428 #24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by:
Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by:
Jens Axboe <axboe@kernel.dk> Signed-off-by:
-
Kevin Hao authored
commit b803974a upstream. This fixes the below calltrace when the CONFIG_DMA_API_DEBUG is enabled. DMA-API: thunderx_mmc 0000:01:01.4: cpu touching an active dma mapped cacheline [cln=0x000000002fdf9800] WARNING: CPU: 21 PID: 1 at kernel/dma/debug.c:596 debug_dma_assert_idle+0x1f8/0x270 Modules linked in: CPU: 21 PID: 1 Comm: init Not tainted 5.3.0-rc1-next-20190725-yocto-standard+ #64 Hardware name: Marvell OcteonTX CN96XX board (DT) pstate: 80400009 (Nzcv daif +PAN -UAO) pc : debug_dma_assert_idle+0x1f8/0x270 lr : debug_dma_assert_idle+0x1f8/0x270 sp : ffff0000113cfc10 x29: ffff0000113cfc10 x28: 0000ffff8c880000 x27: ffff800bc72a0000 x26: ffff000010ff8000 x25: ffff000010ff8940 x24: ffff000010ff8968 x23: 0000000000000000 x22: ffff000010e83700 x21: ffff000010ea2000 x20: ffff000010e835c8 x19: ffff800bc2c73300 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6d20616d64206576 x13: 69746361206e6120 x12: 676e696863756f74 x11: 20757063203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 3230303030303030 x7 : 00000000000002fd x6 : ffff000010fd57d0 x5 : 0000000000000000 x4 : ffff0000106c5210 x3 : 00000000ffffffff x2 : 0000800bee9c0000 x1 : 57d5843f4aa62800 x0 : 0000000000000000 Call trace: debug_dma_assert_idle+0x1f8/0x270 wp_page_copy+0xb0/0x688 do_wp_page+0xa8/0x5b8 __handle_mm_fault+0x600/0xd00 handle_mm_fault+0x118/0x1e8 do_page_fault+0x200/0x500 do_mem_abort+0x50/0xb0 el0_da+0x20/0x24 ---[ end trace a005534bd23e109f ]--- DMA-API: Mapped at: debug_dma_map_sg+0x94/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 Signed-off-by:
Kevin Hao <haokexin@gmail.com> Fixes: ba3869ff ("mmc: cavium: Add core MMC driver for Cavium SOCs") Cc: stable@vger.kernel.org Signed-off-by:
Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by:
-
Kevin Hao authored
commit fa25eba6 upstream. We have set the mmc_host.max_seg_size to 8M, but the dma max segment size of PCI device is set to 64K by default in function pci_device_add(). The mmc_host.max_seg_size is used to set the max segment size of the blk queue. Then this mismatch will trigger a calltrace like below when a bigger than 64K segment request arrives at mmc dev. So we should consider the limitation of the cvm_mmc_host when setting the mmc_host.max_seg_size. DMA-API: thunderx_mmc 0000:01:01.4: mapping sg segment longer than device claims to support [len=131072] [max=65536] WARNING: CPU: 6 PID: 238 at kernel/dma/debug.c:1221 debug_dma_map_sg+0x2b8/0x350 Modules linked in: CPU: 6 PID: 238 Comm: kworker/6:1H Not tainted 5.3.0-rc1-next-20190724-yocto-standard+ #62 Hardware name: Marvell OcteonTX CN96XX board (DT) Workqueue: kblockd blk_mq_run_work_fn pstate: 80c00009 (Nzcv daif +PAN +UAO) pc : debug_dma_map_sg+0x2b8/0x350 lr : debug_dma_map_sg+0x2b8/0x350 sp : ffff00001770f9e0 x29: ffff00001770f9e0 x28: ffffffff00000000 x27: 00000000ffffffff x26: ffff800bc2c73180 x25: ffff000010e83700 x24: 0000000000000002 x23: 0000000000000001 x22: 0000000000000001 x21: 0000000000000000 x20: ffff800bc48ba0b0 x19: ffff800bc97e8c00 x18: ffffffffffffffff x17: 0000000000000000 x16: 0000000000000000 x15: ffff000010e835c8 x14: 6874207265676e6f x13: 6c20746e656d6765 x12: 7320677320676e69 x11: 7070616d203a342e x10: 31303a31303a3030 x9 : 303020636d6d5f78 x8 : 35363d78616d5b20 x7 : 00000000000002fd x6 : ffff000010fd57dc x5 : 0000000000000000 x4 : ffff0000106c61f0 x3 : 00000000ffffffff x2 : 0000800bee060000 x1 : 7010678df3041a00 x0 : 0000000000000000 Call trace: debug_dma_map_sg+0x2b8/0x350 cvm_mmc_request+0x3c4/0x988 __mmc_start_request+0x9c/0x1f8 mmc_start_request+0x7c/0xb0 mmc_blk_mq_issue_rq+0x5c4/0x7b8 mmc_mq_queue_rq+0x11c/0x278 blk_mq_dispatch_rq_list+0xb0/0x568 blk_mq_do_dispatch_sched+0x6c/0x108 blk_mq_sched_dispatch_requests+0x110/0x1b8 __blk_mq_run_hw_queue+0xb0/0x118 blk_mq_run_work_fn+0x28/0x38 process_one_work+0x210/0x490 worker_thread+0x48/0x458 kthread+0x130/0x138 ret_from_fork+0x10/0x1c Signed-off-by:
-
Wenwen Wang authored
commit c7cd7c74 upstream. In sound_insert_unit(), the controlling structure 's' is allocated through kmalloc(). Then it is added to the sound driver list by invoking __sound_insert_unit(). Later on, if __register_chrdev() fails, 's' is removed from the list through __sound_remove_unit(). If 'index' is not less than 0, -EBUSY is returned to indicate the error. However, 's' is not deallocated on this execution path, leading to a memory leak bug. To fix the above issue, free 's' before -EBUSY is returned. Signed-off-by:
Wenwen Wang <wenwen@cs.uga.edu> Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Oliver Neukum authored
commit c468a8aa upstream. We have to drop the mutex before we close() upon disconnect() as close() needs the lock. This is safe to do by dropping the mutex as intfdata is already set to NULL, so open() will fail. Fixes: 03f36e88 ("USB: open disconnect race in iowarrior") Reported-by: syzbot+a64a382964bf6c71a9c0@syzkaller.appspotmail.com Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Gavin Li authored
commit c43f28df upstream. Upon an error within proc_do_submiturb(), dec_usb_memory_use_count() gets called once by the error handling tail and again by free_async(). Remove the first call. Signed-off-by:
Gavin Li <git@thegavinli.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190804235044.22327-1-gavinli@thegavinli.comSigned-off-by:
-
Gary R Hook authored
commit e2664ecb upstream. AES GCM input buffers for decryption contain AAD+CTEXT+TAG. Only decrypt the ciphertext, and use the tag for comparison. Fixes: 36cf515b ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> Signed-off-by:
Gary R Hook <gary.hook@amd.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Gary R Hook authored
commit 9f00baf7 upstream. AES GCM encryption allows for authsize values of 4, 8, and 12-16 bytes. Validate the requested authsize, and retain it to save in the request context. Fixes: 36cf515b ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Gary R Hook authored
commit 25e44338 upstream. A plaintext or ciphertext length of 0 is allowed in AES, in which case no encryption occurs. Ensure that we don't clean up data structures that were never allocated. Fixes: 36cf515b ("crypto: ccp - Enable support for AES GCM on v5 CCPs") Cc: <stable@vger.kernel.org> Signed-off-by:
-
Tetsuo Handa authored
commit 8f9e86ee upstream. syzbot found that a thread can stall for minutes inside ion_system_heap_allocate() after that thread was killed by SIGKILL [1]. Let's check for SIGKILL before doing memory allocation. [1] https://syzkaller.appspot.com/bug?id=a0e3436829698d5824231251fad9d8e998f94f5eSigned-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: stable <stable@vger.kernel.org> Reported-by:
syzbot <syzbot+8ab2d0f39fb79fe6ca40@syzkaller.appspotmail.com> Acked-by:
Laura Abbott <labbott@redhat.com> Acked-by:
Sumit Semwal <sumit.semwal@linaro.org> Link: https://lore.kernel.org/r/d088f188-5f32-d8fc-b9a0-0b404f7501cc@I-love.SAKURA.ne.jpSigned-off-by:
-
Ivan Bornyakov authored
commit 66665bb9 upstream. In sysfs_show() case-branches ATTR_KERNEL_HIB_PAGE_TABLE_SIZE and ATTR_KERNEL_HIB_SIMPLE_PAGE_TABLE_SIZE do the same. It looks like copy-paste mistake. Signed-off-by:
Ivan Bornyakov <brnkv.i1@gmail.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20190710204518.16814-1-brnkv.i1@gmail.comSigned-off-by:
-
Joe Perches authored
commit ae8cc91a upstream. Arguments are supposed to be ordered high then low. Signed-off-by:
Joe Perches <joe@perches.com> Fixes: 69780a3b ("iio: adc: Add Maxim max9611 ADC driver") Cc: <Stable@vger.kernel.org> Signed-off-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Signed-off-by:
-
Gwendal Grignou authored
commit 6cdff99c upstream. INFO_SCALE is set both for each channel and all channels. iio is using all channel setting, so the error was not user visible. Signed-off-by:
Gwendal Grignou <gwendal@chromium.org> Cc: <Stable@vger.kernel.org> Signed-off-by:
-
- 09 Aug, 2019 15 commits
-
-
Greg Kroah-Hartman authored
-
Lukas Wunner authored
commit 8d8bef50 upstream. Commit 6935224d ("spi: bcm2835: enable support of 3-wire mode") added 3-wire support to the BCM2835 SPI driver by setting the REN bit (Read Enable) in the CS register when receiving data. The REN bit puts the transmitter in high-impedance state. The driver recognizes that data is to be received by checking whether the rx_buf of a transfer is non-NULL. Commit 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") subsequently broke 3-wire support because it set the SPI_MASTER_MUST_RX flag which causes spi_map_msg() to replace rx_buf with a dummy buffer if it is NULL. As a result, rx_buf is *always* non-NULL if DMA is enabled. Reinstate 3-wire support by not only checking whether rx_buf is non-NULL, but also checking that it is not the dummy buffer. Fixes: 3ecd37ed ("spi: bcm2835: enable dma modes for transfers meeting certain conditions") Reported-by:
Nuno Sá <nuno.sa@analog.com> Signed-off-by:
Lukas Wunner <lukas@wunner.de> Cc: stable@vger.kernel.org # v4.2+ Cc: Martin Sperl <kernel@martin.sperl.org> Acked-by:
Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/328318841455e505370ef8ecad97b646c033dc8a.1562148527.git.lukas@wunner.deSigned-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Tejun Heo authored
commit c596687a upstream. While adding handling for dying task group leaders c03cd773 ("cgroup: Include dying leaders with live threads in PROCS iterations") added an inverted cset skip condition to css_task_iter_advance_css_set(). It should skip cset if it's completely empty but was incorrectly testing for the inverse condition for the dying_tasks list. Fix it. Signed-off-by:
Tejun Heo <tj@kernel.org> Fixes: c03cd773 ("cgroup: Include dying leaders with live threads in PROCS iterations") Reported-by: syzbot+d4bba5ccd4f9a2a68681@syzkaller.appspotmail.com Signed-off-by:
-
Tejun Heo authored
commit cee0c33c upstream. b636fd38 ("cgroup: Implement css_task_iter_skip()") introduced css_task_iter_skip() which is used to fix task iterations skipping dying threadgroup leaders with live threads. Skipping is implemented as a subportion of full advancing but css_task_iter_next() forgot to fully advance a skipped iterator before determining the next task to visit causing it to return invalid task pointers. Fix it by making css_task_iter_next() fully advance the iterator if it has been skipped since the previous iteration. Signed-off-by:
-
Tejun Heo authored
commit c03cd773 upstream. CSS_TASK_ITER_PROCS currently iterates live group leaders; however, this means that a process with dying leader and live threads will be skipped. IOW, cgroup.procs might be empty while cgroup.threads isn't, which is confusing to say the least. Fix it by making cset track dying tasks and include dying leaders with live threads in PROCS iteration. Signed-off-by:
Topi Miettinen <toiwoton@gmail.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Tejun Heo authored
commit b636fd38 upstream. When a task is moved out of a cset, task iterators pointing to the task are advanced using the normal css_task_iter_advance() call. This is fine but we'll be tracking dying tasks on csets and thus moving tasks from cset->tasks to (to be added) cset->dying_tasks. When we remove a task from cset->tasks, if we advance the iterators, they may move over to the next cset before we had the chance to add the task back on the dying list, which can allow the task to escape iteration. This patch separates out skipping from advancing. Skipping only moves the affected iterators to the next pointer rather than fully advancing it and the following advancing will recognize that the cursor has already been moved forward and do the rest of advancing. This ensures that when a task moves from one list to another in its cset, as long as it moves in the right direction, it's always visible to iteration. This doesn't cause any visible behavior changes. Signed-off-by:
-
Tejun Heo authored
commit 6b115bf5 upstream. cgroup_release() calls cgroup_subsys->release() which is used by the pids controller to uncharge its pid. We want to use it to manage iteration of dying tasks which requires putting it before __unhash_process(). Move cgroup_release() above __exit_signal(). While this makes it uncharge before the pid is freed, pid is RCU freed anyway and the window is very narrow. Signed-off-by:
-
Arnd Bergmann authored
[ Upstream commit 055d8824 ] Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269 ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit 003bd5b4 ] It was reported that after resuming from suspend network fails with error "do_IRQ: 3.38 No irq handler for vector", see [0]. Enabling WoL can work around the issue, but the only actual fix is to disable MSI. So let's mimic the behavior of the vendor driver and disable MSI on all chip versions before RTL8168d. [0] https://bugzilla.kernel.org/show_bug.cgi?id=204079 Fixes: 6c6aa15f ("r8169: improve interrupt handling") Reported-by:
Dušan Dragić <dragic.dusan@gmail.com> Tested-by:
Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by:
-
Ariel Levkovich authored
[ Upstream commit 90bb7692 ] This patch prevents a race between user invoked cached counters query and a neighbor last usage updater. The cached flow counter stats can be queried by calling "mlx5_fc_query_cached" which provides the number of bytes and packets that passed via this flow since the last time this counter was queried. It does so by reducting the last saved stats from the current, cached stats and then updating the last saved stats with the cached stats. It also provide the lastuse value for that flow. Since "mlx5e_tc_update_neigh_used_value" needs to retrieve the last usage time of encapsulation flows, it calls the flow counter query method periodically and async to user queries of the flow counter using cls_flower. This call is causing the driver to update the last reported bytes and packets from the cache and therefore, future user queries of the flow stats will return lower than expected number for bytes and packets since the last saved stats in the driver was updated async to the last saved stats in cls_flower. This causes wrong stats presentation of encapsulation flows to user. Since the neighbor usage updater only needs the lastuse stats from the cached counter, the fix is to use a dedicated lastuse query call that returns the lastuse value without synching between the cached stats and the last saved stats. Fixes: f6dfb4c3 ("net/mlx5e: Update neighbour 'used' state using HW flow rules counters") Signed-off-by:
Ariel Levkovich <lariel@mellanox.com> Reviewed-by:
Roi Dayan <roid@mellanox.com> Signed-off-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Edward Srouji authored
[ Upstream commit 7a32f296 ] Fix modify_cq_in alignment to match the device specification. After this fix the 'cq_umem_valid' field will be in the right offset. Cc: <stable@vger.kernel.org> # 4.19 Fixes: bd371975 ("net/mlx5: Update mlx5_ifc with DEVX UID bits") Signed-off-by:
Edward Srouji <edwards@mellanox.com> Reviewed-by:
Yishai Hadas <yishaih@mellanox.com> Signed-off-by:
Leon Romanovsky <leonro@mellanox.com> Signed-off-by:
-
Alexis Bauvin authored
[ Upstream commit 4b663366 ] - v1 -> v2: Move skb_set_owner_w to __tun_build_skb to reduce patch size Small packets going out of a tap device go through an optimized code path that uses build_skb() rather than sock_alloc_send_pskb(). The latter calls skb_set_owner_w(), but the small packet code path does not. The net effect is that small packets are not owned by the userland application's socket (e.g. QEMU), while large packets are. This can be seen with a TCP session, where packets are not owned when the window size is small enough (around PAGE_SIZE), while they are once the window grows (note that this requires the host to support virtio tso for the guest to offload segmentation). All this leads to inconsistent behaviour in the kernel, especially on netfilter modules that uses sk->socket (e.g. xt_owner). Fixes: 66ccbc9c ("tap: use build_skb() for small packet") Signed-off-by:
Alexis Bauvin <abauvin@scaleway.com> Acked-by:
Jason Wang <jasowang@redhat.com> Signed-off-by:
-
Taras Kondratiuk authored
[ Upstream commit 4da5f001 ] Commit 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") broke older tipc tools that use compat interface (e.g. tipc-config from tipcutils package): % tipc-config -p operation not supported The commit started to reject TIPC netlink compat messages that do not have attributes. It is too restrictive because some of such messages are valid (they don't need any arguments): % grep 'tx none' include/uapi/linux/tipc_config.h #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ This patch relaxes the original fix and rejects messages without arguments only if such arguments are expected by a command (reg_type is non zero). Fixes: 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") Cc: stable@vger.kernel.org Signed-off-by:
Taras Kondratiuk <takondra@cisco.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
Claudiu Manoil authored
[ Upstream commit c5d13969 ] Make sure the delayed work for stats update is not pending before wq destruction. This fixes the module unload path. The issue is there since day 1. Fixes: a556c76a ("net: mscc: Add initial Ocelot switch support") Signed-off-by:
Claudiu Manoil <claudiu.manoil@nxp.com> Reviewed-by:
Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by:
-
Johan Hovold authored
[ Upstream commit c3953a3c ] Fix two reset-gpio sanity checks which were never converted to use gpio_is_valid(), and make sure to use -EINVAL to indicate a missing reset line also for the UART-driver module parameter and for the USB driver. This specifically prevents the UART and USB drivers from incidentally trying to request and use gpio 0, and also avoids triggering a WARN() in gpio_to_desc() during probe when no valid reset line has been specified. Fixes: e33a3f84 ("NFC: nfcmrvl: allow gpio 0 for reset signalling") Reported-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Tested-by: syzbot+cf35b76f35e068a1107f@syzkaller.appspotmail.com Signed-off-by:
Johan Hovold <johan@kernel.org> Signed-off-by:
-
