- 19 Jul, 2022 12 commits
-
-
Jakub Kicinski authored
Vladimir Oltean says: ==================== Fix 2 DSA issues with vlan_filtering_is_global This patch set fixes 2 issues with vlan_filtering_is_global switches. Both are regressions introduced by refactoring commit d0004a02 ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core"), which wasn't tested on a wide enough variety of switches. Tested on the sja1105 driver. ==================== Link: https://lore.kernel.org/r/20220715151659.780544-1-vladimir.oltean@nxp.comSigned-off-by:
Jakub Kicinski <kuba@kernel.org>
-
Vladimir Oltean authored
The "ds" iterator variable used in dsa_port_reset_vlan_filtering() -> dsa_switch_for_each_port() overwrites the "dp" received as argument, which is later used to call dsa_port_vlan_filtering() proper. As a result, switches which do enter that code path (the ones with vlan_filtering_is_global=true) will dereference an invalid dp in dsa_port_reset_vlan_filtering() after leaving a VLAN-aware bridge. Use a dedicated "other_dp" iterator variable to avoid this from happening. Fixes: d0004a02 ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core") Signed-off-by:
Vladimir Oltean <vladimir.oltean@nxp.com> Signed-off-by:
-
Vladimir Oltean authored
The blamed refactoring commit changed a "port" iterator with "other_dp", but still looked at the slave_dev of the dp outside the loop, instead of other_dp->slave from the loop. As a result, dsa_port_vlan_filtering() would not call dsa_slave_manage_vlan_filtering() except for the port in cause, and not for all switch ports as expected. Fixes: d0004a02 ("net: dsa: remove the "dsa_to_port in a loop" antipattern from the core") Reported-by:
Lucian Banu <Lucian.Banu@westermo.com> Signed-off-by:
-
Piotr Skajewski authored
It is possible to disable VFs while the PF driver is processing requests from the VF driver. This can result in a panic. BUG: unable to handle kernel paging request at 000000000000106c PGD 0 P4D 0 Oops: 0000 [#1] SMP NOPTI CPU: 8 PID: 0 Comm: swapper/8 Kdump: loaded Tainted: G I --------- - Hardware name: Dell Inc. PowerEdge R740/06WXJT, BIOS 2.8.2 08/27/2020 RIP: 0010:ixgbe_msg_task+0x4c8/0x1690 [ixgbe] Code: 00 00 48 8d 04 40 48 c1 e0 05 89 7c 24 24 89 fd 48 89 44 24 10 83 ff 01 0f 84 b8 04 00 00 4c 8b 64 24 10 4d 03 a5 48 22 00 00 <41> 80 7c 24 4c 00 0f 84 8a 03 00 00 0f b7 c7 83 f8 08 0f 84 8f 0a RSP: 0018:ffffb337869f8df8 EFLAGS: 00010002 RAX: 0000000000001020 RBX: 0000000000000000 RCX: 000000000000002b RDX: 0000000000000002 RSI: 0000000000000008 RDI: 0000000000000006 RBP: 0000000000000006 R08: 0000000000000002 R09: 0000000000029780 R10: 00006957d8f42832 R11: 0000000000000000 R12: 0000000000001020 R13: ffff8a00e8978ac0 R14: 000000000000002b R15: ffff8a00e8979c80 FS: 0000000000000000(0000) GS:ffff8a07dfd00000(0000) knlGS:00000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000106c CR3: 0000000063e10004 CR4: 00000000007726e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: <IRQ> ? ttwu_do_wakeup+0x19/0x140 ? try_to_wake_up+0x1cd/0x550 ? ixgbevf_update_xcast_mode+0x71/0xc0 [ixgbevf] ixgbe_msix_other+0x17e/0x310 [ixgbe] __handle_irq_event_percpu+0x40/0x180 handle_irq_event_percpu+0x30/0x80 handle_irq_event+0x36/0x53 handle_edge_irq+0x82/0x190 handle_irq+0x1c/0x30 do_IRQ+0x49/0xd0 common_interrupt+0xf/0xf This can be eventually be reproduced with the following script: while : do echo 63 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 echo 0 > /sys/class/net/<devname>/device/sriov_numvfs sleep 1 done Add lock when disabling SR-IOV to prevent process VF mailbox communication. Fixes: d773d131 ("ixgbe: Fix memory leak when SR-IOV VFs are direct assigned") Signed-off-by:Piotr Skajewski <piotrx.skajewski@intel.com> Tested-by:
Marek Szlosek <marek.szlosek@intel.com> Signed-off-by:
Tony Nguyen <anthony.l.nguyen@intel.com> Link: https://lore.kernel.org/r/20220715214456.2968711-1-anthony.l.nguyen@intel.comSigned-off-by:
-
Dawid Lukwinski authored
Fix an issue when driver incorrectly detects state of recovery process and erroneously reinitializes interrupts, which results in a kernel error and call trace message. The issue was caused by a combination of two factors: 1. Assuming the EMP reset issued after completing firmware recovery means the whole recovery process is complete. 2. Erroneous reinitialization of interrupt vector after detecting the above mentioned EMP reset. Fixes (1) by changing how recovery state change is detected and (2) by adjusting the conditional expression to ensure using proper interrupt reinitialization method, depending on the situation. Fixes: 4ff0ee1a ("i40e: Introduce recovery mode support") Signed-off-by:
Dawid Lukwinski <dawid.lukwinski@intel.com> Signed-off-by:
Jan Sokolowski <jan.sokolowski@intel.com> Tested-by:
Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by:
-
Tom Rix authored
In mtk_wed_tx_ring_setup(.., int idx, ..), idx is used as an index here struct mtk_wed_ring *ring = &dev->tx_ring[idx]; The bounds of idx are checked here BUG_ON(idx > ARRAY_SIZE(dev->tx_ring)); If idx is the size of the array, it will pass this check and overflow. So change the check to >= . Fixes: 804775df ("net: ethernet: mtk_eth_soc: add support for Wireless Ethernet Dispatch (WED)") Signed-off-by:
Tom Rix <trix@redhat.com> Link: https://lore.kernel.org/r/20220716214654.1540240-1-trix@redhat.comSigned-off-by:
-
Jakub Kicinski authored
Horatiu Vultur says: ==================== net: lan966x: Fix issues with MAC table The patch series fixes 2 issues: - when an entry was forgotten the irq thread was holding a spin lock and then was talking also rtnl_lock. - the access to the HW MAC table is indirect, so the access to the HW MAC table was not synchronized, which means that there could be race conditions. ==================== Link: https://lore.kernel.org/r/20220714194040.231651-1-horatiu.vultur@microchip.comSigned-off-by:
-
Horatiu Vultur authored
When the SW bridge was trying to add/remove entries to/from HW, the access to HW was not protected by any lock. In this way, it was possible to have race conditions. Fix this by using the lan966x->mac_lock to protect parallel access to HW for this cases. Fixes: 25ee9561 ("net: lan966x: More MAC table functionality") Signed-off-by:
Horatiu Vultur <horatiu.vultur@microchip.com> Reviewed-by:
-
Horatiu Vultur authored
The problem with this spin lock is that it was just protecting the list of the MAC entries in SW and not also the access to the MAC entries in HW. Because the access to HW is indirect, then it could happen to have race conditions. For example when SW introduced an entry in MAC table and the irq mac is trying to read something from the MAC. Update such that also the access to MAC entries in HW is protected by this lock. Fixes: 5ccd66e0 ("net: lan966x: add support for interrupts from analyzer") Signed-off-by:
-
Horatiu Vultur authored
To remove an entry to the MAC table, it is required first to setup the entry and then issue a command for the MAC to forget the entry. So if it happens for two threads to remove simultaneously an entry in MAC table then it would be a race condition. Fix this by using lan966x->mac_lock to protect the HW access. Fixes: e18aba89 ("net: lan966x: add mactable support") Signed-off-by:
-
Horatiu Vultur authored
To add an entry to the MAC table, it is required first to setup the entry and then issue a command for the MAC to learn the entry. So if it happens for two threads to add simultaneously an entry in MAC table then it would be a race condition. Fix this by using lan966x->mac_lock to protect the HW access. Fixes: fc0c3fe7 ("net: lan966x: Add function lan966x_mac_ip_learn()") Signed-off-by:
-
Horatiu Vultur authored
When the HW deletes an entry in MAC table then it generates an interrupt. The SW will go through it's own list of MAC entries and if it is not found then it would notify the listeners about this. The problem is that when the SW will go through it's own list it would take a spin lock(lan966x->mac_lock) and when it notifies that the entry is deleted. But to notify the listeners it taking the rtnl_lock which is illegal. This is fixed by instead of notifying right away that the entry is deleted, move the entry on a temp list and once, it checks all the entries then just notify that the entries from temp list are deleted. Fixes: 5ccd66e0 ("net: lan966x: add support for interrupts from analyzer") Signed-off-by:
-
- 18 Jul, 2022 28 commits
-
-
David S. Miller authored
Vladimir Oltean says: ==================== Update DSA documentation These are some updates of dsa.rst, since it hasn't kept up with development (in some cases, even since 2017). I've added Fixes: tags as I thought was appropriate. ==================== Signed-off-by:David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
The blamed commit updated the way in which VLANs are handled at the cross-chip notifier layer and didn't update the documentation to say that. Fix it. Fixes: 134ef238 ("net: dsa: add explicit support for host bridge VLANs") Signed-off-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Vladimir Oltean authored
Returning -EOPNOTSUPP does *NOT* mean anything special. port_vlan_add() is actually called from 2 code paths, one is vlan_vid_add() from 8021q module and the other is br_switchdev_port_vlan_add() from switchdev. The bridge has a wrapper __vlan_vid_add() which first tries via switchdev, then if that returns -EOPNOTSUPP, tries again via the VLAN RX filters in the 8021q module. But DSA doesn't distinguish between one call path and the other when calling the driver's port_vlan_add(), so if the driver returns -EOPNOTSUPP to switchdev, it also returns -EOPNOTSUPP to the 8021q module. And the latter is a hard error. port_fdb_add() is called from the deferred dsa_owq only, so obviously its return code isn't propagated anywhere, and cannot be interpreted in any way. The return code from port_mdb_add() is propagated to the bridge, but again, this doesn't do anything special when -EOPNOTSUPP is returned, but rather, br_switchdev_mdb_notify() returns void. Signed-off-by:
-
Vladimir Oltean authored
Switchdev has changed radically from its initial implementation, and the currently provided definition is incorrect and very confusing. Rewrite it in light of what it actually does. Fixes: 2bedde1a ("net: dsa: Move FDB dump implementation inside DSA") Signed-off-by:
-
Vladimir Oltean authored
The given definition for what VID 0 represents in the current port_fdb_add and port_mdb_add is blatantly wrong. Delete it and explain the concepts surrounding DSA's understanding of FDB isolation. Fixes: c2693363 ("net: dsa: request drivers to perform FDB isolation") Signed-off-by:
-
Vladimir Oltean authored
This was deleted in 2017, stop documenting it. Fixes: dc0cbff3 ("net: dsa: Remove redundant MDB dump support") Signed-off-by:
-
Vladimir Oltean authored
This was deleted in 2017, delete the obsolete documentation. Fixes: c069fcd8 ("net: dsa: Remove support for bypass bridge port attributes/vlan set") Signed-off-by:
-
Vladimir Oltean authored
We've changed the API through which we can offload the bridge TX forwarding process. Update the documentation in light of the removal of 2 DSA switch ops. Fixes: b079922b ("net: dsa: add a "tx_fwd_offload" argument to ->port_bridge_join") Signed-off-by:
-
Vladimir Oltean authored
The provided information about FDB flushing is not really up to date. The DSA core automatically calls port_fast_age() when necessary, and drivers should just implement that rather than hooking it to port_bridge_leave, port_stp_state_set and others. Fixes: 732f794c ("net: dsa: add port fast ageing") Signed-off-by:
-
Vladimir Oltean authored
These methods were added without being documented, fix that. Fixes: fd292c18 ("net: dsa: tear down devlink port regions when tearing down the devlink port on error") Signed-off-by:
-
Vladimir Oltean authored
A teardown method was added to dsa_switch_ops without being documented. Do so now. Fixes: 5e3f847a ("net: dsa: Add teardown callback for drivers") Signed-off-by:
-
Vladimir Oltean authored
Support for changing the tagging protocol was added without this operation being documented; do so now. Fixes: 53da0eba ("net: dsa: allow changing the tag protocol via the "tagging" device attribute") Signed-off-by:
-
Vladimir Oltean authored
Changes were made to the prototype of get_tag_protocol without describing at a high level what they are about. Update the documentation to explain that. Fixes: 5ed4e3eb ("net: dsa: Pass a port to get_tag_protocol()") Fixes: 4d776482 ("net: dsa: Get information about stacked DSA protocol") Signed-off-by:
-
Vladimir Oltean authored
Since the blamed commit, the enum was turned into a function pointer and also renamed. Update the documentation. Fixes: 7b314362 ("net: dsa: Allow the DSA driver to indicate the tag protocol") Signed-off-by:
-
Vladimir Oltean authored
Document the changes that took place in the DSA core in the blamed commit. Fixes: 0650bf52 ("net: dsa: be compatible with masters which unregister on shutdown") Signed-off-by:
-
Vladimir Oltean authored
Since the blamed commit we don't have register_switch_driver() and unregister_switch_driver() anymore. Additionally, the expected dsa_register_switch() and dsa_unregister_switch() calls aren't documented. Update the probing section with the details of how things are currently done. Fixes: 93e86b3b ("net: dsa: Remove legacy probing support") Signed-off-by:
-
David S. Miller authored
Kuniyuki Iwashima says: ==================== sysctl: Fix data-races around ipv4_net_table (Round 3). This series fixes data-races around 21 knobs after igmp_link_local_mcast_reports in ipv4_net_table. These 4 knobs are skipped because they are safe. - tcp_congestion_control: Safe with RCU and xchg(). - tcp_available_congestion_control: Read only. - tcp_allowed_congestion_control: Safe with RCU and spinlock(). - tcp_fastopen_key: Safe with RCU and xchg() So, round 4 will start with fib_multipath_use_neigh. ==================== Signed-off-by: -
Kuniyuki Iwashima authored
While reading sysctl_tcp_fastopen_blackhole_timeout, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: cf1ef3f0 ("net/tcp_fastopen: Disable active side TFO in certain scenarios") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_fastopen, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 2100c8d2 ("net-tcp: Fast Open base") Signed-off-by:
Yuchung Cheng <ycheng@google.com> Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_max_syn_backlog, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_tw_reuse, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_notsent_lowat, it can be changed concurrently. Thus, we need to add READ_ONCE() to its reader. Fixes: c9bee3b7 ("tcp: TCP_NOTSENT_LOWAT socket option") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading these sysctl knobs, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. - tcp_retries1 - tcp_retries2 - tcp_orphan_retries - tcp_fin_timeout Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_reordering, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_migrate_req, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: f9ac779f ("net: Introduce net.ipv4.tcp_migrate_req.") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_syncookies, it can be changed concurrently. Thus, we need to add READ_ONCE() to its readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_syn(ack)?_retries, they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
Kuniyuki Iwashima authored
While reading sysctl_tcp_keepalive_(time|probes|intvl), they can be changed concurrently. Thus, we need to add READ_ONCE() to their readers. Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
-
