- 28 Jul, 2014 31 commits
-
-
Tyler Hall authored
[ Upstream commit a8e83b17 ] The commit "slip: Fix deadlock in write_wakeup" fixes a deadlock caused by a change made in both slcan and slip. This is a direct port of that fix. Signed-off-by:
Tyler Hall <tylerwhall@gmail.com> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Andre Naujoks <nautsch2@gmail.com> Cc: David S. Miller <davem@davemloft.net> Cc: linux-kernel@vger.kernel.org Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Tyler Hall authored
[ Upstream commit 661f7fda ] Use schedule_work() to avoid potentially taking the spinlock in interrupt context. Commit cc9fa74e ("slip/slcan: added locking in wakeup function") added necessary locking to the wakeup function and 367525c8/ddcde142 ("can: slcan: Fix spinlock variant") converted it to spin_lock_bh() because the lock is also taken in timers. Disabling softirqs is not sufficient, however, as tty drivers may call write_wakeup from interrupt context. This driver calls tty->ops->write() with its spinlock held, which may immediately cause an interrupt on the same CPU and subsequent spin_bug(). Simply converting to spin_lock_irq/irqsave() prevents this deadlock, but causes lockdep to point out a possible circular locking dependency between these locks: (&(&sl->lock)->rlock){-.....}, at: slip_write_wakeup (&port_lock_key){-.....}, at: serial8250_handle_irq.part.13 The slip transmit is holding the slip spinlock when calling the tty write. This grabs the port lock. On an interrupt, the handler grabs the port lock and calls write_wakeup which grabs the slip lock. This could be a problem if a serial interrupt occurs on another CPU during the slip transmit. To deal with these issues, don't grab the lock in the wakeup function by deferring the writeout to a workqueue. Also hold the lock during close when de-assigning the tty pointer to safely disarm the worker and timers. This bug is easily reproducible on the first transmit when slip is used with the standard 8250 serial driver. [<c0410b7c>] (spin_bug+0x0/0x38) from [<c006109c>] (do_raw_spin_lock+0x60/0x1d0) r5:eab27000 r4:ec02754c [<c006103c>] (do_raw_spin_lock+0x0/0x1d0) from [<c04185c0>] (_raw_spin_lock+0x28/0x2c) r10:0000001f r9:eabb814c r8:eabb8140 r7:40070193 r6:ec02754c r5:eab27000 r4:ec02754c r3:00000000 [<c0418598>] (_raw_spin_lock+0x0/0x2c) from [<bf3a0220>] (slip_write_wakeup+0x50/0xe0 [slip]) r4:ec027540 r3:00000003 [<bf3a01d0>] (slip_write_wakeup+0x0/0xe0 [slip]) from [<c026e420>] (tty_wakeup+0x48/0x68) r6:00000000 r5:ea80c480 r4:eab27000 r3:bf3a01d0 [<c026e3d8>] (tty_wakeup+0x0/0x68) from [<c028a8ec>] (uart_write_wakeup+0x2c/0x30) r5:ed68ea90 r4:c06790d8 [<c028a8c0>] (uart_write_wakeup+0x0/0x30) from [<c028dc44>] (serial8250_tx_chars+0x114/0x170) [<c028db30>] (serial8250_tx_chars+0x0/0x170) from [<c028dffc>] (serial8250_handle_irq+0xa0/0xbc) r6:000000c2 r5:00000060 r4:c06790d8 r3:00000000 [<c028df5c>] (serial8250_handle_irq+0x0/0xbc) from [<c02933a4>] (dw8250_handle_irq+0x38/0x64) r7:00000000 r6:edd2f390 r5:000000c2 r4:c06790d8 [<c029336c>] (dw8250_handle_irq+0x0/0x64) from [<c028d2f4>] (serial8250_interrupt+0x44/0xc4) r6:00000000 r5:00000000 r4:c06791c4 r3:c029336c [<c028d2b0>] (serial8250_interrupt+0x0/0xc4) from [<c0067fe4>] (handle_irq_event_percpu+0xb4/0x2b0) r10:c06790d8 r9:eab27000 r8:00000000 r7:00000000 r6:0000001f r5:edd52980 r4:ec53b6c0 r3:c028d2b0 [<c0067f30>] (handle_irq_event_percpu+0x0/0x2b0) from [<c006822c>] (handle_irq_event+0x4c/0x6c) r10:c06790d8 r9:eab27000 r8:c0673ae0 r7:c05c2020 r6:ec53b6c0 r5:edd529d4 r4:edd52980 [<c00681e0>] (handle_irq_event+0x0/0x6c) from [<c006b140>] (handle_level_irq+0xe8/0x100) r6:00000000 r5:edd529d4 r4:edd52980 r3:00022000 [<c006b058>] (handle_level_irq+0x0/0x100) from [<c00676f8>] (generic_handle_irq+0x30/0x40) r5:0000001f r4:0000001f [<c00676c8>] (generic_handle_irq+0x0/0x40) from [<c000f57c>] (handle_IRQ+0xd0/0x13c) r4:ea997b18 r3:000000e0 [<c000f4ac>] (handle_IRQ+0x0/0x13c) from [<c00086c4>] (armada_370_xp_handle_irq+0x4c/0x118) r8:000003ff r7:ea997b18 r6:ffffffff r5:60070013 r4:c0674dc0 [<c0008678>] (armada_370_xp_handle_irq+0x0/0x118) from [<c0013840>] (__irq_svc+0x40/0x70) Exception stack(0xea997b18 to 0xea997b60) 7b00: 00000001 20070013 7b20: 00000000 0000000b 20070013 eab27000 20070013 00000000 ed10103e eab27000 7b40: c06790d8 ea997b74 ea997b60 ea997b60 c04186c0 c04186c8 60070013 ffffffff r9:eab27000 r8:ed10103e r7:ea997b4c r6:ffffffff r5:60070013 r4:c04186c8 [<c04186a4>] (_raw_spin_unlock_irqrestore+0x0/0x54) from [<c0288fc0>] (uart_start+0x40/0x44) r4:c06790d8 r3:c028ddd8 [<c0288f80>] (uart_start+0x0/0x44) from [<c028982c>] (uart_write+0xe4/0xf4) r6:0000003e r5:00000000 r4:ed68ea90 r3:0000003e [<c0289748>] (uart_write+0x0/0xf4) from [<bf3a0d20>] (sl_xmit+0x1c4/0x228 [slip]) r10:ed388e60 r9:0000003c r8:ffffffdd r7:0000003e r6:ec02754c r5:ea717eb8 r4:ec027000 [<bf3a0b5c>] (sl_xmit+0x0/0x228 [slip]) from [<c0368d74>] (dev_hard_start_xmit+0x39c/0x6d0) r8:eaf163c0 r7:ec027000 r6:ea717eb8 r5:00000000 r4:00000000 Signed-off-by:
-
Dmitry Popov authored
[ Upstream commit e0056593 ] This patch fixes 3 similar bugs where incoming packets might be routed into wrong non-wildcard tunnels: 1) Consider the following setup: ip address add 1.1.1.1/24 dev eth0 ip address add 1.1.1.2/24 dev eth0 ip tunnel add ipip1 remote 2.2.2.2 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets from 2.2.2.2 were routed into ipip1 even if it has dst = 1.1.1.2. Moreover even if there was wildcard tunnel like ip tunnel add ipip0 remote 2.2.2.2 local any mode ipip dev eth0 but it was created before explicit one (with local 1.1.1.1), incoming ipip packets with src = 2.2.2.2 and dst = 1.1.1.2 were still routed into ipip1. Same issue existed with all tunnels that use ip_tunnel_lookup (gre, vti) 2) ip address add 1.1.1.1/24 dev eth0 ip tunnel add ipip1 remote 2.2.146.85 local 1.1.1.1 mode ipip dev eth0 ip link set ipip1 up Incoming ipip packets with dst = 1.1.1.1 were routed into ipip1, no matter what src address is. Any remote ip address which has ip_tunnel_hash = 0 raised this issue, 2.2.146.85 is just an example, there are more than 4 million of them. And again, wildcard tunnel like ip tunnel add ipip0 remote any local 1.1.1.1 mode ipip dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. Gre & vti tunnels had the same issue. 3) ip address add 1.1.1.1/24 dev eth0 ip tunnel add gre1 remote 2.2.146.84 local 1.1.1.1 key 1 mode gre dev eth0 ip link set gre1 up Any incoming gre packet with key = 1 were routed into gre1, no matter what src/dst addresses are. Any remote ip address which has ip_tunnel_hash = 0 raised the issue, 2.2.146.84 is just an example, there are more than 4 million of them. Wildcard tunnel like ip tunnel add gre2 remote any local any key 1 mode gre dev eth0 wouldn't be ever matched if it was created before explicit tunnel like above. All this stuff happened because while looking for a wildcard tunnel we didn't check that matched tunnel is a wildcard one. Fixed. Signed-off-by:
Dmitry Popov <ixaphire@qrator.net> Signed-off-by:
-
David Ertman authored
commit 96dee024 upstream. Previous commit c3a0dce3 fixed an overrun for the RAR on i218 devices. This commit also attempted to homogenize the RAR/SHRA access for all parts accessed by the e1000e driver. This change introduced an error for assigning MAC addresses to guest OS's for 82579 devices. Only RAR[0] is accessible to the driver for 82579 parts, and additional addresses must be placed into the SHRA[L|H] registers. The rar_entry_count was changed in the previous commit to an inaccurate value that accounted for all RAR and SHRA registers, not just the ones usable by the driver. This patch fixes the count to the correct value and adjusts the e1000_rar_set_pch2lan() function to user the correct index. Cc: John Greene <jogreene@redhat.com> Signed-off-by:
Dave Ertman <davidx.m.ertman@intel.com> Tested-by:
Aaron Brown <aaron.f.brown@intel.com> Signed-off-by:
Jeff Kirsher <jeffrey.t.kirsher@intel.com> Cc: "Alexander Y. Fomichev" <aleksandr.fomichev@x5.ru> Signed-off-by:
-
Hugh Dickins authored
commit b1a36650 upstream. shmem_fault() is the actual culprit in trinity's hole-punch starvation, and the most significant cause of such problems: since a page faulted is one that then appears page_mapped(), needing unmap_mapping_range() and i_mmap_mutex to be unmapped again. But it is not the only way in which a page can be brought into a hole in the radix_tree while that hole is being punched; and Vlastimil's testing implies that if enough other processors are busy filling in the hole, then shmem_undo_range() can be kept from completing indefinitely. shmem_file_splice_read() is the main other user of SGP_CACHE, which can instantiate shmem pagecache pages in the read-only case (without holding i_mutex, so perhaps concurrently with a hole-punch). Probably it's silly not to use SGP_READ already (using the ZERO_PAGE for holes): which ought to be safe, but might bring surprises - not a change to be rushed. shmem_read_mapping_page_gfp() is an internal interface used by drivers/gpu/drm GEM (and next by uprobes): it should be okay. And shmem_file_read_iter() uses the SGP_DIRTY variant of SGP_CACHE, when called internally by the kernel (perhaps for a stacking filesystem, which might rely on holes to be reserved): it's unclear whether it could be provoked to keep hole-punch busy or not. We could apply the same umbrella as now used in shmem_fault() to shmem_file_splice_read() and the others; but it looks ugly, and use over a range raises questions - should it actually be per page? can these get starved themselves? The origin of this part of the problem is my v3.1 commit d0823576 ("mm: pincer in truncate_inode_pages_range"), once it was duplicated into shmem.c. It seemed like a nice idea at the time, to ensure (barring RCU lookup fuzziness) that there's an instant when the entire hole is empty; but the indefinitely repeated scans to ensure that make it vulnerable. Revert that "enhancement" to hole-punch from shmem_undo_range(), but retain the unproblematic rescanning when it's truncating; add a couple of comments there. Remove the "indices[0] >= end" test: that is now handled satisfactorily by the inner loop, and mem_cgroup_uncharge_start()/end() are too light to be worth avoiding here. But if we do not always loop indefinitely, we do need to handle the case of swap swizzled back to page before shmem_free_swap() gets it: add a retry for that case, as suggested by Konstantin Khlebnikov; and for the case of page swizzled back to swap, as suggested by Johannes Weiner. Signed-off-by:
Hugh Dickins <hughd@google.com> Reported-by:
Sasha Levin <sasha.levin@oracle.com> Suggested-by:
Vlastimil Babka <vbabka@suse.cz> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lukas Czerner <lczerner@redhat.com> Cc: Dave Jones <davej@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Hugh Dickins authored
commit 8e205f77 upstream. Commit f00cdc6d ("shmem: fix faulting into a hole while it's punched") was buggy: Sasha sent a lockdep report to remind us that grabbing i_mutex in the fault path is a no-no (write syscall may already hold i_mutex while faulting user buffer). We tried a completely different approach (see following patch) but that proved inadequate: good enough for a rational workload, but not good enough against trinity - which forks off so many mappings of the object that contention on i_mmap_mutex while hole-puncher holds i_mutex builds into serious starvation when concurrent faults force the puncher to fall back to single-page unmap_mapping_range() searches of the i_mmap tree. So return to the original umbrella approach, but keep away from i_mutex this time. We really don't want to bloat every shmem inode with a new mutex or completion, just to protect this unlikely case from trinity. So extend the original with wait_queue_head on stack at the hole-punch end, and wait_queue item on the stack at the fault end. This involves further use of i_lock to guard against the races: lockdep has been happy so far, and I see fs/inode.c:unlock_new_inode() holds i_lock around wake_up_bit(), which is comparable to what we do here. i_lock is more convenient, but we could switch to shmem's info->lock. This issue has been tagged with CVE-2014-4171, which will require commit f00cdc6d and this and the following patch to be backported: we suggest to 3.1+, though in fact the trinity forkbomb effect might go back as far as 2.6.16, when madvise(,,MADV_REMOVE) came in - or might not, since much has changed, with i_mmap_mutex a spinlock before 3.0. Anyone running trinity on 3.0 and earlier? I don't think we need care. Signed-off-by:
-
Hugh Dickins authored
commit f00cdc6d upstream. Trinity finds that mmap access to a hole while it's punched from shmem can prevent the madvise(MADV_REMOVE) or fallocate(FALLOC_FL_PUNCH_HOLE) from completing, until the reader chooses to stop; with the puncher's hold on i_mutex locking out all other writers until it can complete. It appears that the tmpfs fault path is too light in comparison with its hole-punching path, lacking an i_data_sem to obstruct it; but we don't want to slow down the common case. Extend shmem_fallocate()'s existing range notification mechanism, so shmem_fault() can refrain from faulting pages into the hole while it's punched, waiting instead on i_mutex (when safe to sleep; or repeatedly faulting when not). [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
-
Emmanuel Grumbach authored
commit 43d826ca upstream. We should always prefer to use full RTS protection. Using CTS to self gives a meaningless improvement, but this flow is much harder for the firmware which is likely to have issues with it. Signed-off-by:
Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by:
-
Oren Givon authored
commit b3c063ae upstream. Add one more 7265 series HW ID. Edit one existing 7265 series HW ID. Signed-off-by:
Oren Givon <oren.givon@intel.com> Signed-off-by:
-
Niu Yawei authored
commit d68aab6b upstream. Commit 1ab6c499 (fs: convert fs shrinkers to new scan/count API) accidentally removed locking from quota shrinker. Fix it - dqcache_shrink_scan() should use dq_list_lock to protect the scan on free_dquots list. Fixes: 1ab6c499Signed-off-by:
Niu Yawei <yawei.niu@intel.com> Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Stefan Assmann authored
commit 76252723 upstream. To properly re-initialize SR-IOV it is necessary to reset the device even if it is already down. Not doing this may result in Tx unit hangs. Signed-off-by:
Stefan Assmann <sassmann@kpanic.de> Tested-by:
-
Todd Fujinaka authored
commit 94826487 upstream. On some devices, the internal PLL circuit occasionally provides the wrong clock frequency after power up. The probability of failure is less than one failure per 1000 power cycles. When the failure occurs, the internal clock frequency is around 1/20 of the correct frequency. Signed-off-by:
Todd Fujinaka <todd.fujinaka@intel.com> Tested-by:
-
Guenter Roeck authored
commit de12d6f4 upstream. Temperature limit registers are signed. Limits therefore need to be clamped to (-128, 127) degrees C and not to (0, 255) degrees C. Without this fix, writing a limit of 128 degrees C sets the actual limit to -128 degrees C. Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Reviewed-by:
Axel Lin <axel.lin@ingics.com> Signed-off-by:
-
Axel Lin authored
commit ee14b644 upstream. Dashes are not allowed in hwmon name attributes. Use "da9052" instead of "da9052-hwmon". Signed-off-by:
-
Axel Lin authored
commit 6b00f440 upstream. Dashes are not allowed in hwmon name attributes. Use "da9055" instead of "da9055-hwmon". Signed-off-by:
-
David Vrabel authored
commit fb9a0c44 upstream. Since cd9151e2 (xen/balloon: set a mapping for ballooned out pages), a ballooned out page had its entry in the p2m set to the MFN of one of the scratch pages. This means that the p2m will contain many entries pointing to the same MFN. During a domain save, these many-to-one entries are not identified as such and the scratch page is saved multiple times. On restore the ballooned pages are populated with new frames and the domain may use up its allocation before all pages can be restored. Since the original fix only needed to keep a mapping for the ballooned page it is safe to set ballooned out pages as INVALID_P2M_ENTRY in the p2m (as they were before). Thus preventing them from being saved and re-populated on restore. Signed-off-by:
David Vrabel <david.vrabel@citrix.com> Reported-by:
Marek Marczykowski <marmarek@invisiblethingslab.com> Tested-by:
Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by:
-
zhangwei(Jovi) authored
commit f0160a5a upstream. The TRACE_ITER_PRINTK check in __trace_puts/__trace_bputs is missing, so add it, to be consistent with __trace_printk/__trace_bprintk. Those functions are all called by the same function: trace_printk(). Link: http://lkml.kernel.org/p/51E7A7D6.8090900@huawei.comSigned-off-by:
zhangwei(Jovi) <jovi.zhangwei@huawei.com> Signed-off-by:
Steven Rostedt <rostedt@goodmis.org> Signed-off-by:
-
zhangwei(Jovi) authored
commit 8abfb872 upstream. Currently trace option stacktrace is not applicable for trace_printk with constant string argument, the reason is in __trace_puts/__trace_bputs ftrace_trace_stack is missing. In contrast, when using trace_printk with non constant string argument(will call into __trace_printk/__trace_bprintk), then trace option stacktrace is workable, this inconstant result will confuses users a lot. Link: http://lkml.kernel.org/p/51E7A7C9.9040401@huawei.comSigned-off-by:
-
Steven Rostedt (Red Hat) authored
commit 5f8bf2d2 upstream. Running my ftrace tests on PowerPC, it failed the test that checks if function_graph tracer is affected by the stack tracer. It was. Looking into this, I found that the update_function_graph_func() must be called even if the trampoline function is not changed. This is because archs like PowerPC do not support ftrace_ops being passed by assembly and instead uses a helper function (what the trampoline function points to). Since this function is not changed even when multiple ftrace_ops are added to the code, the test that falls out before calling update_function_graph_func() will miss that the update must still be done. Call update_function_graph_function() for all calls to update_ftrace_function() Signed-off-by:
-
Oleg Nesterov authored
commit 2448e349 upstream. instance_rmdir() path destroys the event files but forgets to free file->filter. Change remove_event_file_dir() to free_event_filter(). Link: http://lkml.kernel.org/p/20140711190638.GA19517@redhat.com Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Tom Zanussi <tom.zanussi@linux.intel.com> Cc: "zhangwei(Jovi)" <jovi.zhangwei@huawei.com> Fixes: f6a84bdc "tracing: Introduce remove_event_file_dir()" Signed-off-by:
Oleg Nesterov <oleg@redhat.com> Signed-off-by:
-
Srinivas Pandruvada authored
commit 78b33216 upstream. When event spec is shared by multiple channels, which has definition for mask_shared_by_type, iio_device_register_eventset fails. For example: static const struct iio_event_spec iio_dummy_events[] = { { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_RISING, .mask_separate = BIT(IIO_EV_INFO_ENABLE), .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), }, { .type = IIO_EV_TYPE_THRESH, .dir = IIO_EV_DIR_FALLING, .mask_separate = BIT(IIO_EV_INFO_ENABLE),a .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE), } }; If two channels use this event spec, this will result in error. This change handles EBUSY error similar to iio_device_add_info_mask_type(). Signed-off-by:
Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Anand Avati authored
commit 154210cc upstream. The following test case demonstrates the bug: sh# mount -t glusterfs localhost:meta-test /mnt/one sh# mount -t glusterfs localhost:meta-test /mnt/two sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; echo stuff > /mnt/one/file bash: /mnt/one/file: Stale file handle sh# echo stuff > /mnt/one/file; rm -f /mnt/two/file; sleep 1; echo stuff > /mnt/one/file On the second open() on /mnt/one, FUSE would have used the old nodeid (file handle) trying to re-open it. Gluster is returning -ESTALE. The ESTALE propagates back to namei.c:filename_lookup() where lookup is re-attempted with LOOKUP_REVAL. The right behavior now, would be for FUSE to ignore the entry-timeout and and do the up-call revalidation. Instead FUSE is ignoring LOOKUP_REVAL, succeeding the revalidation (because entry-timeout has not passed), and open() is again retried on the old file handle and finally the ESTALE is going back to the application. Fix: if revalidation is happening with LOOKUP_REVAL, then ignore entry-timeout and always do the up-call. Signed-off-by:
Anand Avati <avati@redhat.com> Reviewed-by:
Niels de Vos <ndevos@redhat.com> Signed-off-by:
Miklos Szeredi <mszeredi@suse.cz> Signed-off-by:
-
Miklos Szeredi authored
commit 233a01fa upstream. If the number in "user_id=N" or "group_id=N" mount options was larger than INT_MAX then fuse returned EINVAL. Fix this to handle all valid uid/gid values. Signed-off-by:
-
Miklos Szeredi authored
commit 126b9d43 upstream. As suggested by checkpatch.pl, use time_before64() instead of direct comparison of jiffies64 values. Signed-off-by:
-
Loic Poulain authored
commit 48439d50 upstream. When detecting a non-link packet, h5_reset_rx() frees the Rx skb. Not returning after that will cause the upcoming h5_rx_payload() call to dereference a now NULL Rx skb and trigger a kernel oops. Signed-off-by:
Loic Poulain <loic.poulain@intel.com> Signed-off-by:
Marcel Holtmann <marcel@holtmann.org> Signed-off-by:
-
K. Y. Srinivasan authored
commit 9bd2d0df upstream. Add code to poll the channel since we process only one message at a time and the host may not interrupt us. Also increase the receive buffer size since some KVP messages are close to 8K bytes in size. Signed-off-by:
K. Y. Srinivasan <kys@microsoft.com> Signed-off-by:
-
Mengdong Lin authored
commit caaf5ef9 upstream. This patch initialized the local audio InfoFrame variable 'ai' to be all zero, thus the data bytes will indicate "Refer to Stream Header" by default. Signed-off-by:
Mengdong Lin <mengdong.lin@intel.com> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
Takashi Iwai authored
commit 4da63c6f upstream. When the initialization of Intel HDMI controller fails due to missing i915 kernel symbols (e.g. HD-audio is built in while i915 is module), the driver discontinues the probe. However, since the probe was done asynchronously, the driver object still remains, thus the relevant PM ops are still called at suspend/resume. This results in the bad access to the incomplete audio card object, eventually leads to Oops or stall at PM. This patch adds the missing checks of chip->init_failed flag at each PM callback in order to fix the problem above. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79561Signed-off-by:
-
Hans de Goede authored
commit 242841d3 upstream. Tested-and-reported-by:
yullaw <yullaw@mageia.cz> Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Mauro Carvalho Chehab <m.chehab@samsung.com> Signed-off-by:
-
Abbas Raza authored
commit 953c6646 upstream. There are 2 methods for ZLP (zero-length packet) generation: 1) In software 2) Automatic generation by device controller 1) is implemented in UDC driver and it attaches ZLP to IN packet if descriptor->size < wLength 2) can be enabled/disabled by setting ZLT bit in the QH When gadget ffs is connected to ubuntu host, the host sends get descriptor request and wLength in setup packet is 255 while the size of descriptor which will be sent by gadget in IN packet is 64 byte. So the composite driver sets req->zero = 1. In UDC driver following code will be executed then if (hwreq->req.zero && hwreq->req.length && (hwreq->req.length % hwep->ep.maxpacket == 0)) add_td_to_list(hwep, hwreq, 0); Case-A: So in case of ubuntu host, UDC driver will attach a ZLP to the IN packet. ubuntu host will request 255 byte in IN request, gadget will send 64 byte with ZLP and host will come to know that there is no more data. But hold on, by default ZLT=0 for endpoint 0 so hardware also tries to automatically generate the ZLP which blocks enumeration for ~6 seconds due to endpoint 0 STALL, NAKs are sent to host for any requests (OUT/PING) Case-B: In case when gadget ffs is connected to Apple device, Apple device sends setup packet with wLength=64. So descriptor->size = 64 and wLength=64 therefore req->zero = 0 and UDC driver will not attach any ZLP to the IN packet. Apple device requests 64 bytes, gets 64 bytes and doesn't further request for IN data. But ZLT=0 by default for endpoint 0 so hardware tries to automatically generate the ZLP which blocks enumeration for ~6 seconds due to endpoint 0 STALL, NAKs are sent to host for any requests (OUT/PING) According to USB2.0 specs: 8.5.3.2 Variable-length Data Stage A control pipe may have a variable-length data phase in which the host requests more data than is contained in the specified data structure. When all of the data structure is returned to the host, the function should indicate that the Data stage is ended by returning a packet that is shorter than the MaxPacketSize for the pipe. If the data structure is an exact multiple of wMaxPacketSize for the pipe, the function will return a zero-length packet to indicate the end of the Data stage. In Case-A mentioned above: If we disable software ZLP generation & ZLT=0 for endpoint 0 OR if software ZLP generation is not disabled but we set ZLT=1 for endpoint 0 then enumeration doesn't block for 6 seconds. In Case-B mentioned above: If we disable software ZLP generation & ZLT=0 for endpoint then enumeration still blocks due to ZLP automatically generated by hardware and host not needing it. But if we keep software ZLP generation enabled but we set ZLT=1 for endpoint 0 then enumeration doesn't block for 6 seconds. So the proper solution for this issue seems to disable automatic ZLP generation by hardware (i.e by setting ZLT=1 for endpoint 0) and let software (UDC driver) handle the ZLP generation based on req->zero field. Signed-off-by:
Abbas Raza <Abbas_Raza@mentor.com> Signed-off-by:
Peter Chen <peter.chen@freescale.com> Signed-off-by:
-
Gavin Guo authored
commit bb86cf56 upstream. When using USB 3.0 pen drive with the [AMD] FCH USB XHCI Controller [1022:7814], the second hotplugging will experience the USB 3.0 pen drive is recognized as high-speed device. After bisecting the kernel, I found the commit number 41e7e056 (USB: Allow USB 3.0 ports to be disabled.) causes the bug. After doing some experiments, the bug can be fixed by avoiding executing the function hub_usb3_port_disable(). Because the port status with [AMD] FCH USB XHCI Controlleris [1022:7814] is already in RxDetect (I tried printing out the port status before setting to Disabled state), it's reasonable to check the port status before really executing hub_usb3_port_disable(). Fixes: 41e7e056 (USB: Allow USB 3.0 ports to be disabled.) Signed-off-by:
Gavin Guo <gavin.guo@canonical.com> Acked-by:
Alan Stern <stern@rowland.harvard.edu> Signed-off-by:
-
- 17 Jul, 2014 9 commits
-
-
Greg Kroah-Hartman authored
-
Lan Tianyu authored
commit 75646e75 upstream. Some machines (eg. Lenovo Z480) ECs are not stable during boot up and causes battery driver fails to be loaded due to failure of getting battery information from EC sometimes. After several retries, the operation will work. This patch is to retry to get battery information 5 times if the first try fails. [ backport to 3.14.5: removed second parameter in acpi_battery_update(), introduced by the commit 9e50bc14 (ACPI / battery: Accelerate battery resume callback)] [naszar <naszar@ya.ru>: backport to 3.14.5] Link: https://bugzilla.kernel.org/show_bug.cgi?id=75581Reported-and-tested-by:
naszar <naszar@ya.ru> Cc: All applicable <stable@vger.kernel.org> Signed-off-by:
Lan Tianyu <tianyu.lan@intel.com> Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by:
-
Roland Dreier authored
commit c81c8a1e upstream. In __ioremap_caller() (the guts of ioremap), we loop over the range of pfns being remapped and checks each one individually with page_is_ram(). For large ioremaps, this can be very slow. For example, we have a device with a 256 GiB PCI BAR, and ioremapping this BAR can take 20+ seconds -- sometimes long enough to trigger the soft lockup detector! Internally, page_is_ram() calls walk_system_ram_range() on a single page. Instead, we can make a single call to walk_system_ram_range() from __ioremap_caller(), and do our further checks only for any RAM pages that we find. For the common case of MMIO, this saves an enormous amount of work, since the range being ioremapped doesn't intersect system RAM at all. With this change, ioremap on our 256 GiB BAR takes less than 1 second. Signed-off-by:
Roland Dreier <roland@purestorage.com> Link: http://lkml.kernel.org/r/1399054721-1331-1-git-send-email-roland@kernel.orgSigned-off-by:
H. Peter Anvin <hpa@linux.intel.com> Signed-off-by:
-
Guenter Roeck authored
commit fb43e847 upstream. powerpc:allmodconfig has been failing for some time with the following error. arch/powerpc/kernel/exceptions-64s.S: Assembler messages: arch/powerpc/kernel/exceptions-64s.S:1312: Error: attempt to move .org backwards make[1]: *** [arch/powerpc/kernel/head_64.o] Error 1 A number of attempts to fix the problem by moving around code have been unsuccessful and resulted in failed builds for some configurations and the discovery of toolchain bugs. Fix the problem by disabling RELOCATABLE for COMPILE_TEST builds instead. While this is less than perfect, it avoids substantial code changes which would otherwise be necessary just to make COMPILE_TEST builds happy and might have undesired side effects. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Chen Gang authored
commit c863810c upstream. It is only a typo issue, the related commit: "1fbc4c4d drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()" The related error (unicore32 with allmodconfig): CC [M] drivers/rtc/rtc-puv3.o drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setpie': drivers/rtc/rtc-puv3.c:74: error: implicit declaration of function 'dev_debug' Signed-off-by:
Chen Gang <gang.chen.5i5j@gmail.com> Acked-by:
Xuetao Guan <gxt@mprc.pku.edu.cn> Signed-off-by:
-
Chen Gang authored
commit 73fa5406 upstream. It is only a typo issue, the related commit: "1fbc4c4d drivers/rtc/rtc-puv3.c: use dev_dbg() instead of pr_debug()" The related error (for unicore32 with allmodconfig): CC [M] drivers/rtc/rtc-puv3.o drivers/rtc/rtc-puv3.c: In function 'puv3_rtc_setalarm': drivers/rtc/rtc-puv3.c:143: error: 'struct device' has no member named 'dev' Signed-off-by:
-
Steven Rostedt (Red Hat) authored
commit 8b8b3683 upstream. The per_cpu buffers are created one per possible CPU. But these do not mean that those CPUs are online, nor do they even exist. With the addition of the ring buffer polling, it assumes that the caller polls on an existing buffer. But this is not the case if the user reads trace_pipe from a CPU that does not exist, and this causes the kernel to crash. Simple fix is to check the cpu against buffer bitmask against to see if the buffer was allocated or not and return -ENODEV if it is not. More updates were done to pass the -ENODEV back up to userspace. Link: http://lkml.kernel.org/r/5393DB61.6060707@oracle.comReported-by:
-
Joonsoo Kim authored
commit fe8eea4f upstream. We should free memory for bitmap when we find zone mismatch, otherwise this memory will leak. Additionally, I copy code comment from PPC KVM's CMA code to inform why we need to check zone mis-match. Signed-off-by:
Joonsoo Kim <iamjoonsoo.kim@lge.com> Acked-by:
Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Reviewed-by:
Michal Nazarewicz <mina86@mina86.com> Reviewed-by:
Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com> Acked-by:
Minchan Kim <minchan@kernel.org> Cc: "Aneesh Kumar K.V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gleb Natapov <gleb@kernel.org> Cc: Alexander Graf <agraf@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Ville Syrjälä authored
commit f1e1c212 upstream. On most gen2-4 platforms the GTT can be (or maybe always is?) inside the stolen memory region. If that's the case, reduce the size of the stolen memory appropriately to make make sure we don't clobber the GTT. v2: Deal with gen4 36 bit physical address Signed-off-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=80151Acked-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
