- 10 Oct, 2020 8 commits
-
-
Jakub Kicinski authored
Paolo Abeni says: ==================== mptcp: some fallback fixes pktdrill pointed-out we currently don't handle properly some fallback scenario for MP_JOIN subflows The first patch addresses such issue. Patch 2/2 fixes a related pre-existing issue that is more evident after 1/2: we could keep using for MPTCP signaling closed subflows. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
The msk can close MP_JOIN subflows if the initial handshake fails. Currently such subflows are kept alive in the conn_list until the msk itself is closed. Beyond the wasted memory, we could end-up sending the DATA_FIN and the DATA_FIN ack on such socket, even after a reset. Fixes: 43b54c6e ("mptcp: Use full MPTCP-level disconnect state machine") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Paolo Abeni authored
Additional/MP_JOIN subflows that do not pass some initial handshake tests currently causes fallback to TCP. That is an RFC violation: we should instead reset the subflow and leave the the msk untouched. Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/91 Fixes: f296234c ("mptcp: Add handling of incoming MP_JOIN requests") Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pujin Shi authored
For older versions of gcc, the array = {0}; will cause warnings: net/smc/smc_llc.c: In function 'smc_llc_add_link_local': net/smc/smc_llc.c:1212:9: warning: missing braces around initializer [-Wmissing-braces] struct smc_llc_msg_add_link add_llc = {0}; ^ net/smc/smc_llc.c:1212:9: warning: (near initialization for 'add_llc.hd') [-Wmissing-braces] net/smc/smc_llc.c: In function 'smc_llc_srv_delete_link_local': net/smc/smc_llc.c:1245:9: warning: missing braces around initializer [-Wmissing-braces] struct smc_llc_msg_del_link del_llc = {0}; ^ net/smc/smc_llc.c:1245:9: warning: (near initialization for 'del_llc.hd') [-Wmissing-braces] 2 warnings generated Fixes: 4dadd151 ("net/smc: enqueue local LLC messages") Signed-off-by: Pujin Shi <shipujin.t@gmail.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Pujin Shi authored
For older versions of gcc, the array = {0}; will cause warnings: net/smc/smc_llc.c: In function 'smc_llc_send_link_delete_all': net/smc/smc_llc.c:1317:9: warning: missing braces around initializer [-Wmissing-braces] struct smc_llc_msg_del_link delllc = {0}; ^ net/smc/smc_llc.c:1317:9: warning: (near initialization for 'delllc.hd') [-Wmissing-braces] 1 warnings generated Fixes: f3811fd7 ("net/smc: send DELETE_LINK, ALL message and wait for send to complete") Signed-off-by: Pujin Shi <shipujin.t@gmail.com> Acked-by: Karsten Graul <kgraul@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'linux-can-fixes-for-5.9-20201008' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can ==================== linux-can-fixes-for-5.9-20201008 The first patch is by Lucas Stach and fixes m_can driver by removing an erroneous call to m_can_class_suspend() in runtime suspend. Which causes the pinctrl state to get stuck on the "sleep" state, which breaks all CAN functionality on SoCs where this state is defined. The last two patches target the j1939 protocol: Cong Wang fixes a syzbot finding of an uninitialized variable in the j1939 transport protocol. I contribute a patch, that fixes the initialization of a same uninitialized variable in a different function. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Hoang Huu Le authored
In the function node_lost_contact(), we call __skb_queue_purge() without grabbing the list->lock. This can cause to a race-condition why processing the list 'namedq' in calling path tipc_named_rcv()->tipc_named_dequeue(). [] BUG: kernel NULL pointer dereference, address: 0000000000000000 [] #PF: supervisor read access in kernel mode [] #PF: error_code(0x0000) - not-present page [] PGD 7ca63067 P4D 7ca63067 PUD 6c553067 PMD 0 [] Oops: 0000 [#1] SMP NOPTI [] CPU: 1 PID: 15 Comm: ksoftirqd/1 Tainted: G O 5.9.0-rc6+ #2 [] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS [...] [] RIP: 0010:tipc_named_rcv+0x103/0x320 [tipc] [] Code: 41 89 44 24 10 49 8b 16 49 8b 46 08 49 c7 06 00 00 00 [...] [] RSP: 0018:ffffc900000a7c58 EFLAGS: 00000282 [] RAX: 00000000000012ec RBX: 0000000000000000 RCX: ffff88807bde1270 [] RDX: 0000000000002c7c RSI: 0000000000002c7c RDI: ffff88807b38f1a8 [] RBP: ffff88807b006288 R08: ffff88806a367800 R09: ffff88806a367900 [] R10: ffff88806a367a00 R11: ffff88806a367b00 R12: ffff88807b006258 [] R13: ffff88807b00628a R14: ffff888069334d00 R15: ffff88806a434600 [] FS: 0000000000000000(0000) GS:ffff888079480000(0000) knlGS:0[...] [] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [] CR2: 0000000000000000 CR3: 0000000077320000 CR4: 00000000000006e0 [] Call Trace: [] ? tipc_bcast_rcv+0x9a/0x1a0 [tipc] [] tipc_rcv+0x40d/0x670 [tipc] [] ? _raw_spin_unlock+0xa/0x20 [] tipc_l2_rcv_msg+0x55/0x80 [tipc] [] __netif_receive_skb_one_core+0x8c/0xa0 [] process_backlog+0x98/0x140 [] net_rx_action+0x13a/0x420 [] __do_softirq+0xdb/0x316 [] ? smpboot_thread_fn+0x2f/0x1e0 [] ? smpboot_thread_fn+0x74/0x1e0 [] ? smpboot_thread_fn+0x14e/0x1e0 [] run_ksoftirqd+0x1a/0x40 [] smpboot_thread_fn+0x149/0x1e0 [] ? sort_range+0x20/0x20 [] kthread+0x131/0x150 [] ? kthread_unuse_mm+0xa0/0xa0 [] ret_from_fork+0x22/0x30 [] Modules linked in: veth tipc(O) ip6_udp_tunnel udp_tunnel [...] [] CR2: 0000000000000000 [] ---[ end trace 65c276a8e2e2f310 ]--- To fix this, we need to grab the lock of the 'namedq' list on both path calling. Fixes: cad2929d ("tipc: update a binding service via broadcast") Acked-by: Jon Maloy <jmaloy@redhat.com> Signed-off-by: Hoang Huu Le <hoang.h.le@dektech.com.au> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Cong Wang authored
skb_unshare() drops a reference count on the old skb unconditionally, so in the failure case, we end up freeing the skb twice here. And because the skb is allocated in fclone and cloned by caller tipc_msg_reassemble(), the consequence is actually freeing the original skb too, thus triggered the UAF by syzbot. Fix this by replacing this skb_unshare() with skb_cloned()+skb_copy(). Fixes: ff48b622 ("tipc: use skb_unshare() instead in tipc_buf_append()") Reported-and-tested-by: syzbot+e96a7ba46281824cc46a@syzkaller.appspotmail.com Cc: Jon Maloy <jmaloy@redhat.com> Cc: Ying Xue <ying.xue@windriver.com> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Reviewed-by: Xin Long <lucien.xin@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 09 Oct, 2020 8 commits
-
-
Randy Dunlap authored
Remove one of the two instances of the function prototype for tls_validate_xmit_skb(). Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Boris Pismenny <borisp@nvidia.com> Cc: Aviad Yehezkel <aviadye@nvidia.com> Cc: John Fastabend <john.fastabend@gmail.com> Cc: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Rohit Maheshwari authored
At first when sendpage gets called, if there is more data, 'more' in tls_push_data() gets set which later sets pending_open_record_frags, but when there is no more data in file left, and last time tls_push_data() gets called, pending_open_record_frags doesn't get reset. And later when 2 bytes of encrypted alert comes as sendmsg, it first checks for pending_open_record_frags, and since this is set, it creates a record with 0 data bytes to encrypt, meaning record length is prepend_size + tag_size only, which causes problem. We should set/reset pending_open_record_frags based on more bit. Fixes: e8f69799 ("net/tls: Add generic NIC offload infrastructure") Signed-off-by: Rohit Maheshwari <rohitm@chelsio.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Naoki Hayama authored
Fix comment typo. s/abitrary/arbitrary/ Signed-off-by: Naoki Hayama <naoki.hayama@lineo.co.jp> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Georg Kohmann authored
When a ICMPV6_PKT_TOOBIG report a next-hop MTU that is less than the IPv6 minimum link MTU, the estimated path MTU is reduced to the minimum link MTU. This behaviour breaks TAHI IPv6 Core Conformance Test v6LC4.1.6: Packet Too Big Less than IPv6 MTU. Referring to RFC 8201 section 4: "If a node receives a Packet Too Big message reporting a next-hop MTU that is less than the IPv6 minimum link MTU, it must discard it. A node must not reduce its estimate of the Path MTU below the IPv6 minimum link MTU on receipt of a Packet Too Big message." Drop the path MTU update if reported MTU is less than the minimum link MTU. Signed-off-by: Georg Kohmann <geokohma@cisco.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Alex Elder authored
When processing a system suspend request we suspend modem endpoints if they are enabled, and call ipa_cmd_tag_process() (which issues IPA commands) to ensure the IPA pipeline is cleared. It is an error to attempt to issue an IPA command before setup is complete, so this is clearly a bug. But we also shouldn't suspend or resume any endpoints that have not been set up. Have ipa_endpoint_suspend() and ipa_endpoint_resume() immediately return if setup hasn't completed, to avoid any attempt to configure endpoints or issue IPA commands in that case. Fixes: 84f9bd12 ("soc: qcom: ipa: IPA endpoints") Tested-by: Matthias Kaehlcke <mka@chromium.org> Signed-off-by: Alex Elder <elder@linaro.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/pablo/nfJakub Kicinski authored
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter selftests fixes from Fabian Frederick: 1) Extend selftest nft_meta.sh to check for meta cpu. 2) Fix selftest nft_meta.sh error reporting. 3) Fix shellcheck warnings in selftest nft_meta.sh. 4) Extend selftest nft_meta.sh to check for meta time. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Davide Caratti authored
using packetdrill it's possible to observe the same MPTCP DSN being acked by different subflows with DACK4 and DACK8. This is in contrast with what specified in RFC8684 §3.3.2: if an MPTCP endpoint transmits a 64-bit wide DSN, it MUST be acknowledged with a 64-bit wide DACK. Fix 'use_64bit_ack' variable to make it a property of MPTCP sockets, not TCP subflows. Fixes: a0c1d0ea ("mptcp: Use 32-bit DATA_ACK when possible") Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Davide Caratti <dcaratti@redhat.com> Reviewed-by: Mat Martineau <mathew.j.martineau@linux.intel.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Marek Vasut authored
The phy_reset_after_clk_enable() does a PHY reset, which means the PHY loses its register settings. The fec_enet_mii_probe() starts the PHY and does the necessary calls to configure the PHY via PHY framework, and loads the correct register settings into the PHY. Therefore, fec_enet_mii_probe() should be called only after the PHY has been reset, not before as it is now. Fixes: 1b0a83ac ("net: fec: add phy_reset_after_clk_enable() support") Reviewed-by: Andrew Lunn <andrew@lunn.ch> Tested-by: Richard Leitner <richard.leitner@skidata.com> Signed-off-by: Marek Vasut <marex@denx.de> Cc: Christoph Niedermaier <cniedermaier@dh-electronics.com> Cc: David S. Miller <davem@davemloft.net> Cc: NXP Linux Team <linux-imx@nxp.com> Cc: Shawn Guo <shawnguo@kernel.org> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
- 08 Oct, 2020 21 commits
-
-
Marc Kleine-Budde authored
This patch add the initialization of skbcnt, similar to: e009f95b can: j1935: j1939_tp_tx_dat_new(): fix missing initialization of skbcnt Let's play save and initialize this skbcnt as well. Suggested-by: Jakub Kicinski <kuba@kernel.org> Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds authored
Pull vhost fixes from Michael Tsirkin: "Some last minute vhost,vdpa fixes. The last two of them haven't been in next but they do seem kind of obvious, very small and safe, fix bugs reported in the field, and they are both in a new mlx5 vdpa driver, so it's not like we can introduce regressions" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vdpa/mlx5: Fix dependency on MLX5_CORE vdpa/mlx5: should keep avail_index despite device status vhost-vdpa: fix page pinning leakage in error path vhost-vdpa: fix vhost_vdpa_map() on error condition vhost: Don't call log_access_ok() when using IOTLB vhost: Use vhost_get_used_size() in vhost_vring_set_addr() vhost: Don't call access_ok() when using IOTLB vhost vdpa: fix vhost_vdpa_open error handling
-
Cong Wang authored
This fixes an uninit-value warning: BUG: KMSAN: uninit-value in can_receive+0x26b/0x630 net/can/af_can.c:650 Reported-and-tested-by: syzbot+3f3837e61a48d32b495f@syzkaller.appspotmail.com Fixes: 9d71dd0c ("can: add support of SAE J1939 protocol") Cc: Robin van der Gracht <robin@protonic.nl> Cc: Oleksij Rempel <linux@rempel-privat.de> Cc: Pengutronix Kernel Team <kernel@pengutronix.de> Cc: Oliver Hartkopp <socketcan@hartkopp.net> Cc: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com> Link: https://lore.kernel.org/r/20201008061821.24663-1-xiyou.wangcong@gmail.comSigned-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "One more set of fixes from the networking tree: - add missing input validation in nl80211_del_key(), preventing out-of-bounds access - last minute fix / improvement of a MRP netlink (uAPI) interface introduced in 5.9 (current) release - fix "unresolved symbol" build error under CONFIG_NET w/o CONFIG_INET due to missing tcp_timewait_sock and inet_timewait_sock BTF. - fix 32 bit sub-register bounds tracking in the bpf verifier for OR case - tcp: fix receive window update in tcp_add_backlog() - openvswitch: handle DNAT tuple collision in conntrack-related code - r8169: wait for potential PHY reset to finish after applying a FW file, avoiding unexpected PHY behaviour and failures later on - mscc: fix tail dropping watermarks for Ocelot switches - avoid use-after-free in macsec code after a call to the GRO layer - avoid use-after-free in sctp error paths - add a device id for Cellient MPL200 WWAN card - rxrpc fixes: - fix the xdr encoding of the contents read from an rxrpc key - fix a BUG() for a unsupported encoding type. - fix missing _bh lock annotations. - fix acceptance handling for an incoming call where the incoming call is encrypted. - the server token keyring isn't network namespaced - it belongs to the server, so there's no need. Namespacing it means that request_key() fails to find it. - fix a leak of the server keyring" * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (21 commits) net: usb: qmi_wwan: add Cellient MPL200 card macsec: avoid use-after-free in macsec_handle_frame() r8169: consider that PHY reset may still be in progress after applying firmware openvswitch: handle DNAT tuple collision sctp: fix sctp_auth_init_hmacs() error path bridge: Netlink interface fix. net: wireless: nl80211: fix out-of-bounds access in nl80211_del_key() bpf: Fix scalar32_min_max_or bounds tracking tcp: fix receive window update in tcp_add_backlog() net: usb: rtl8150: set random MAC address when set_ethernet_addr() fails mptcp: more DATA FIN fixes net: mscc: ocelot: warn when encoding an out-of-bounds watermark value net: mscc: ocelot: divide watermark value by 60 when writing to SYS_ATOP net: qrtr: ns: Fix the incorrect usage of rcu_read_lock() rxrpc: Fix server keyring leak rxrpc: The server keyring isn't network-namespaced rxrpc: Fix accept on a connection that need securing rxrpc: Fix some missing _bh annotations on locking conn->state_lock rxrpc: Downgrade the BUG() for unsupported token type in rxrpc_read() rxrpc: Fix rxkad token xdr encoding ...
-
Eli Cohen authored
Remove propmt for selecting MLX5_VDPA by the user and modify MLX5_VDPA_NET to select MLX5_VDPA. Also modify MLX5_VDPA_NET to depend on mlx5_core. This fixes an issue where configuration sets 'y' for MLX5_VDPA_NET while MLX5_CORE is compiled as a module causing link errors. Reported-by: kernel test robot <lkp@intel.com> Fixes: 1a86b377 ("vdpa/mlx5: Add VDPA driver for supported mlx5 device")s Signed-off-by: Eli Cohen <elic@nvidia.com> Link: https://lore.kernel.org/r/20201007064011.GA50074@mtl-vdi-166.wap.labs.mlnxSigned-off-by: Michael S. Tsirkin <mst@redhat.com>
-
Si-Wei Liu authored
A VM with mlx5 vDPA has below warnings while being reset: vhost VQ 0 ring restore failed: -1: Resource temporarily unavailable (11) vhost VQ 1 ring restore failed: -1: Resource temporarily unavailable (11) We should allow userspace emulating the virtio device be able to get to vq's avail_index, regardless of vDPA device status. Save the index that was last seen when virtq was stopped, so that userspace doesn't complain. Signed-off-by: Si-Wei Liu <si-wei.liu@oracle.com> Link: https://lore.kernel.org/r/1601583511-15138-1-git-send-email-si-wei.liu@oracle.comSigned-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Eli Cohen <elic@nvidia.com>
-
Wilken Gottwalt authored
Add usb ids of the Cellient MPL200 card. Signed-off-by: Wilken Gottwalt <wilken.gottwalt@mailbox.org> Acked-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
De-referencing skb after call to gro_cells_receive() is not allowed. We need to fetch skb->len earlier. Fixes: 5491e7c6 ("macsec: enable GRO and RPS on macsec devices") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Paolo Abeni <pabeni@redhat.com> Acked-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Heiner Kallweit authored
Some firmware files trigger a PHY soft reset and don't wait for it to be finished. PHY register writes directly after applying the firmware may fail or provide unexpected results therefore. Fix this by waiting for bit BMCR_RESET to be cleared after applying firmware. There's nothing wrong with the referenced change, it's just that the fix will apply cleanly only after this change. Fixes: 89fbd26c ("r8169: fix firmware not resetting tp->ocp_base") Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Dumitru Ceara authored
With multiple DNAT rules it's possible that after destination translation the resulting tuples collide. For example, two openvswitch flows: nw_dst=10.0.0.10,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) nw_dst=10.0.0.20,tp_dst=10, actions=ct(commit,table=2,nat(dst=20.0.0.1:20)) Assuming two TCP clients initiating the following connections: 10.0.0.10:5000->10.0.0.10:10 10.0.0.10:5000->10.0.0.20:10 Both tuples would translate to 10.0.0.10:5000->20.0.0.1:20 causing nf_conntrack_confirm() to fail because of tuple collision. Netfilter handles this case by allocating a null binding for SNAT at egress by default. Perform the same operation in openvswitch for DNAT if no explicit SNAT is requested by the user and allocate a null binding for SNAT for packets in the "original" direction. Reported-at: https://bugzilla.redhat.com/1877128Suggested-by: Florian Westphal <fw@strlen.de> Fixes: 05752523 ("openvswitch: Interface with NAT.") Signed-off-by: Dumitru Ceara <dceara@redhat.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Eric Dumazet authored
After freeing ep->auth_hmacs we have to clear the pointer or risk use-after-free as reported by syzbot: BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] BUG: KASAN: use-after-free in sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] BUG: KASAN: use-after-free in sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 Read of size 8 at addr ffff8880a8ff52c0 by task syz-executor941/6874 CPU: 0 PID: 6874 Comm: syz-executor941 Not tainted 5.9.0-rc8-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x198/0x1fd lib/dump_stack.c:118 print_address_description.constprop.0.cold+0xae/0x497 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 sctp_auth_destroy_hmacs net/sctp/auth.c:509 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_free+0x17e/0x1d0 net/sctp/auth.c:1070 sctp_endpoint_destroy+0x95/0x240 net/sctp/endpointola.c:203 sctp_endpoint_put net/sctp/endpointola.c:236 [inline] sctp_endpoint_free+0xd6/0x110 net/sctp/endpointola.c:183 sctp_destroy_sock+0x9c/0x3c0 net/sctp/socket.c:4981 sctp_v6_destroy_sock+0x11/0x20 net/sctp/socket.c:9415 sk_common_release+0x64/0x390 net/core/sock.c:3254 sctp_close+0x4ce/0x8b0 net/sctp/socket.c:1533 inet_release+0x12e/0x280 net/ipv4/af_inet.c:431 inet6_release+0x4c/0x70 net/ipv6/af_inet6.c:475 __sock_release+0xcd/0x280 net/socket.c:596 sock_close+0x18/0x20 net/socket.c:1277 __fput+0x285/0x920 fs/file_table.c:281 task_work_run+0xdd/0x190 kernel/task_work.c:141 exit_task_work include/linux/task_work.h:25 [inline] do_exit+0xb7d/0x29f0 kernel/exit.c:806 do_group_exit+0x125/0x310 kernel/exit.c:903 __do_sys_exit_group kernel/exit.c:914 [inline] __se_sys_exit_group kernel/exit.c:912 [inline] __x64_sys_exit_group+0x3a/0x50 kernel/exit.c:912 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x43f278 Code: Bad RIP value. RSP: 002b:00007fffe0995c38 EFLAGS: 00000246 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 000000000043f278 RDX: 0000000000000000 RSI: 000000000000003c RDI: 0000000000000000 RBP: 00000000004bf068 R08: 00000000000000e7 R09: ffffffffffffffd0 R10: 0000000020000000 R11: 0000000000000246 R12: 0000000000000001 R13: 00000000006d1180 R14: 0000000000000000 R15: 0000000000000000 Allocated by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc.constprop.0+0xbf/0xd0 mm/kasan/common.c:461 kmem_cache_alloc_trace+0x174/0x300 mm/slab.c:3554 kmalloc include/linux/slab.h:554 [inline] kmalloc_array include/linux/slab.h:593 [inline] kcalloc include/linux/slab.h:605 [inline] sctp_auth_init_hmacs+0xdb/0x3b0 net/sctp/auth.c:464 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 6874: kasan_save_stack+0x1b/0x40 mm/kasan/common.c:48 kasan_set_track+0x1c/0x30 mm/kasan/common.c:56 kasan_set_free_info+0x1b/0x30 mm/kasan/generic.c:355 __kasan_slab_free+0xd8/0x120 mm/kasan/common.c:422 __cache_free mm/slab.c:3422 [inline] kfree+0x10e/0x2b0 mm/slab.c:3760 sctp_auth_destroy_hmacs net/sctp/auth.c:511 [inline] sctp_auth_destroy_hmacs net/sctp/auth.c:501 [inline] sctp_auth_init_hmacs net/sctp/auth.c:496 [inline] sctp_auth_init_hmacs+0x2b7/0x3b0 net/sctp/auth.c:454 sctp_auth_init+0x8a/0x4a0 net/sctp/auth.c:1049 sctp_setsockopt_auth_supported net/sctp/socket.c:4354 [inline] sctp_setsockopt+0x477e/0x97f0 net/sctp/socket.c:4631 __sys_setsockopt+0x2db/0x610 net/socket.c:2132 __do_sys_setsockopt net/socket.c:2143 [inline] __se_sys_setsockopt net/socket.c:2140 [inline] __x64_sys_setsockopt+0xba/0x150 net/socket.c:2140 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: 1f485649 ("[SCTP]: Implement SCTP-AUTH internals") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Vlad Yasevich <vyasevich@gmail.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Jakub Kicinski authored
Merge tag 'mac80211-for-net-2020-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211 Johannes Berg says: ==================== pull-request: mac80211 2020-10-08 A single fix for missing input validation in nl80211. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpfJakub Kicinski authored
Daniel Borkmann says: ==================== pull-request: bpf 2020-10-08 The main changes are: 1) Fix "unresolved symbol" build error under CONFIG_NET w/o CONFIG_INET due to missing tcp_timewait_sock and inet_timewait_sock BTF, from Yonghong Song. 2) Fix 32 bit sub-register bounds tracking for OR case, from Daniel Borkmann. ==================== Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
Henrik Bjoernlund authored
This commit is correcting NETLINK br_fill_ifinfo() to be able to handle 'filter_mask' with multiple flags asserted. Fixes: 36a8e8e2 ("bridge: Extend br_fill_ifinfo to return MPR status") Signed-off-by: Henrik Bjoernlund <henrik.bjoernlund@microchip.com> Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com> Suggested-by: Nikolay Aleksandrov <nikolay@nvidia.com> Tested-by: Horatiu Vultur <horatiu.vultur@microchip.com> Acked-by: Nikolay Aleksandrov <nikolay@nvidia.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-
git://anongit.freedesktop.org/drm/drmLinus Torvalds authored
Pull drm nouveau fixes from Dave Airlie: "Karol found two last minute nouveau fixes, they both fix crashes, the TTM one follows what other drivers do already, and the other is for bailing on load on unrecognised chipsets. - fix crash in TTM alloc fail path - return error earlier for unknown chipsets" * tag 'drm-fixes-2020-10-08' of git://anongit.freedesktop.org/drm/drm: drm/nouveau/mem: guard against NULL pointer access in mem_del drm/nouveau/device: return error for unknown chipsets
-
git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfatLinus Torvalds authored
Pull exfat fixes from Namjae Jeon: - Fix use of uninitialized spinlock on error path - Fix missing err assignment in exfat_build_inode() * tag 'exfat-for-5.9-rc9' of git://git.kernel.org/pub/scm/linux/kernel/git/linkinjeon/exfat: exfat: fix use of uninitialized spinlock on error path exfat: fix pointer error checking
-
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tipLinus Torvalds authored
Pull xen fix from Juergen Gross: "One fix for a regression when booting as a Xen guest on ARM64 introduced probably during the 5.9 cycle. It is very low risk as it is modifying Xen specific code only. The exact commit introducing the bug hasn't been identified yet, but everything was fine in 5.8 and only in 5.9 some configurations started to fail" * tag 'for-linus-5.9b-rc9-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: arm/arm64: xen: Fix to convert percpu address to gfn correctly
-
David Howells authored
The afs filesystem has a lock[*] that it uses to serialise I/O operations going to the server (vnode->io_lock), as the server will only perform one modification operation at a time on any given file or directory. This prevents the the filesystem from filling up all the call slots to a server with calls that aren't going to be executed in parallel anyway, thereby allowing operations on other files to obtain slots. [*] Note that is probably redundant for directories at least since i_rwsem is used to serialise directory modifications and lookup/reading vs modification. The server does allow parallel non-modification ops, however. When a file truncation op completes, we truncate the in-memory copy of the file to match - but we do it whilst still holding the io_lock, the idea being to prevent races with other operations. However, if writeback starts in a worker thread simultaneously with truncation (whilst notify_change() is called with i_rwsem locked, writeback pays it no heed), it may manage to set PG_writeback bits on the pages that will get truncated before afs_setattr_success() manages to call truncate_pagecache(). Truncate will then wait for those pages - whilst still inside io_lock: # cat /proc/8837/stack [<0>] wait_on_page_bit_common+0x184/0x1e7 [<0>] truncate_inode_pages_range+0x37f/0x3eb [<0>] truncate_pagecache+0x3c/0x53 [<0>] afs_setattr_success+0x4d/0x6e [<0>] afs_wait_for_operation+0xd8/0x169 [<0>] afs_do_sync_operation+0x16/0x1f [<0>] afs_setattr+0x1fb/0x25d [<0>] notify_change+0x2cf/0x3c4 [<0>] do_truncate+0x7f/0xb2 [<0>] do_sys_ftruncate+0xd1/0x104 [<0>] do_syscall_64+0x2d/0x3a [<0>] entry_SYSCALL_64_after_hwframe+0x44/0xa9 The writeback operation, however, stalls indefinitely because it needs to get the io_lock to proceed: # cat /proc/5940/stack [<0>] afs_get_io_locks+0x58/0x1ae [<0>] afs_begin_vnode_operation+0xc7/0xd1 [<0>] afs_store_data+0x1b2/0x2a3 [<0>] afs_write_back_from_locked_page+0x418/0x57c [<0>] afs_writepages_region+0x196/0x224 [<0>] afs_writepages+0x74/0x156 [<0>] do_writepages+0x2d/0x56 [<0>] __writeback_single_inode+0x84/0x207 [<0>] writeback_sb_inodes+0x238/0x3cf [<0>] __writeback_inodes_wb+0x68/0x9f [<0>] wb_writeback+0x145/0x26c [<0>] wb_do_writeback+0x16a/0x194 [<0>] wb_workfn+0x74/0x177 [<0>] process_one_work+0x174/0x264 [<0>] worker_thread+0x117/0x1b9 [<0>] kthread+0xec/0xf1 [<0>] ret_from_fork+0x1f/0x30 and thus deadlock has occurred. Note that whilst afs_setattr() calls filemap_write_and_wait(), the fact that the caller is holding i_rwsem doesn't preclude more pages being dirtied through an mmap'd region. Fix this by: (1) Use the vnode validate_lock to mediate access between afs_setattr() and afs_writepages(): (a) Exclusively lock validate_lock in afs_setattr() around the whole RPC operation. (b) If WB_SYNC_ALL isn't set on entry to afs_writepages(), trying to shared-lock validate_lock and returning immediately if we couldn't get it. (c) If WB_SYNC_ALL is set, wait for the lock. The validate_lock is also used to validate a file and to zap its cache if the file was altered by a third party, so it's probably a good fit for this. (2) Move the truncation outside of the io_lock in setattr, using the same hook as is used for local directory editing. This requires the old i_size to be retained in the operation record as we commit the revised status to the inode members inside the io_lock still, but we still need to know if we reduced the file size. Fixes: d2ddc776 ("afs: Overhaul volume and server record caching and fileserver rotation") Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Linus Torvalds authored
In commit 70e806e4 ("mm: Do early cow for pinned pages during fork() for ptes") we write-protected the PTE before doing the page pinning check, in order to avoid a race with concurrent fast-GUP pinning (which doesn't take the mm semaphore or the page table lock). That trick doesn't actually work - it doesn't handle memory ordering properly, and doing so would be prohibitively expensive. It also isn't really needed. While we're moving in the direction of allowing and supporting page pinning without marking the pinned area with MADV_DONTFORK, the fact is that we've never really supported this kind of odd "concurrent fork() and page pinning", and doing the serialization on a pte level is just wrong. We can add serialization with a per-mm sequence counter, so we know how to solve that race properly, but we'll do that at a more appropriate time. Right now this just removes the write protect games. It also turns out that the write protect games actually break on Power, as reported by Aneesh Kumar: "Architecture like ppc64 expects set_pte_at to be not used for updating a valid pte. This is further explained in commit 56eecdb9 ("mm: Use ptep/pmdp_set_numa() for updating _PAGE_NUMA bit")" and the code triggered a warning there: WARNING: CPU: 0 PID: 30613 at arch/powerpc/mm/pgtable.c:185 set_pte_at+0x2a8/0x3a0 arch/powerpc/mm/pgtable.c:185 Call Trace: copy_present_page mm/memory.c:857 [inline] copy_present_pte mm/memory.c:899 [inline] copy_pte_range mm/memory.c:1014 [inline] copy_pmd_range mm/memory.c:1092 [inline] copy_pud_range mm/memory.c:1127 [inline] copy_p4d_range mm/memory.c:1150 [inline] copy_page_range+0x1f6c/0x2cc0 mm/memory.c:1212 dup_mmap kernel/fork.c:592 [inline] dup_mm+0x77c/0xab0 kernel/fork.c:1355 copy_mm kernel/fork.c:1411 [inline] copy_process+0x1f00/0x2740 kernel/fork.c:2070 _do_fork+0xc4/0x10b0 kernel/fork.c:2429 Link: https://lore.kernel.org/lkml/CAHk-=wiWr+gO0Ro4LvnJBMs90OiePNyrE3E+pJvc9PzdBShdmw@mail.gmail.com/ Link: https://lore.kernel.org/linuxppc-dev/20201008092541.398079-1-aneesh.kumar@linux.ibm.com/Reported-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Tested-by: Leon Romanovsky <leonro@nvidia.com> Cc: Peter Xu <peterx@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Kara <jack@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Kirill Shutemov <kirill@shutemov.name> Cc: Hugh Dickins <hughd@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Anant Thazhemadam authored
In nl80211_parse_key(), key.idx is first initialized as -1. If this value of key.idx remains unmodified and gets returned, and nl80211_key_allowed() also returns 0, then rdev_del_key() gets called with key.idx = -1. This causes an out-of-bounds array access. Handle this issue by checking if the value of key.idx after nl80211_parse_key() is called and return -EINVAL if key.idx < 0. Cc: stable@vger.kernel.org Reported-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com Tested-by: syzbot+b1bb342d1d097516cbda@syzkaller.appspotmail.com Signed-off-by: Anant Thazhemadam <anant.thazhemadam@gmail.com> Link: https://lore.kernel.org/r/20201007035401.9522-1-anant.thazhemadam@gmail.comSigned-off-by: Johannes Berg <johannes.berg@intel.com>
-
Daniel Borkmann authored
Simon reported an issue with the current scalar32_min_max_or() implementation. That is, compared to the other 32 bit subreg tracking functions, the code in scalar32_min_max_or() stands out that it's using the 64 bit registers instead of 32 bit ones. This leads to bounds tracking issues, for example: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x1; 0x700000000),s32_max_value=1,u32_max_value=1) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] The bound tests on the map value force the upper unsigned bound to be 25769803777 in 64 bit (0b11000000000000000000000000000000001) and then lower one to be 1. By using OR they are truncated and thus result in the range [1,1] for the 32 bit reg tracker. This is incorrect given the only thing we know is that the value must be positive and thus 2147483647 (0b1111111111111111111111111111111) at max for the subregs. Fix it by using the {u,s}32_{min,max}_value vars instead. This also makes sense, for example, for the case where we update dst_reg->s32_{min,max}_value in the else branch we need to use the newly computed dst_reg->u32_{min,max}_value as we know that these are positive. Previously, in the else branch the 64 bit values of umin_value=1 and umax_value=32212254719 were used and latter got truncated to be 1 as upper bound there. After the fix the subreg range is now correct: [...] 8: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 8: (79) r1 = *(u64 *)(r0 +0) R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R10=fp0 fp-8=mmmmmmmm 9: R0=map_value(id=0,off=0,ks=4,vs=48,imm=0) R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 9: (b7) r0 = 1 10: R0_w=inv1 R1_w=inv(id=0) R10=fp0 fp-8=mmmmmmmm 10: (18) r2 = 0x600000002 12: R0_w=inv1 R1_w=inv(id=0) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 12: (ad) if r1 < r2 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: R0_w=inv1 R1_w=inv(id=0,umin_value=25769803778) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 13: (95) exit 14: R0_w=inv1 R1_w=inv(id=0,umax_value=25769803777,var_off=(0x0; 0x7ffffffff)) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 14: (25) if r1 > 0x0 goto pc+1 R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: R0_w=inv1 R1_w=inv(id=0,umax_value=0,var_off=(0x0; 0x7fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 15: (95) exit 16: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=25769803777,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm 16: (47) r1 |= 0 17: R0_w=inv1 R1_w=inv(id=0,umin_value=1,umax_value=32212254719,var_off=(0x0; 0x77fffffff),u32_max_value=2147483647) R2_w=inv25769803778 R10=fp0 fp-8=mmmmmmmm [...] Fixes: 3f50f132 ("bpf: Verifier, do explicit ALU32 bounds tracking") Reported-by: Simon Scannell <scannell.smn@gmail.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Reviewed-by: John Fastabend <john.fastabend@gmail.com> Acked-by: Alexei Starovoitov <ast@kernel.org>
-
- 07 Oct, 2020 3 commits
-
-
Karol Herbst authored
other drivers seems to do something similar Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201006220528.13925-2-kherbst@redhat.com
-
Karol Herbst authored
Previously the code relied on device->pri to be NULL and to fail probing later. We really should just return an error inside nvkm_device_ctor for unsupported GPUs. Fixes: 24d5ff40 ("drm/nouveau/device: rework mmio mapping code to get rid of second map") Signed-off-by: Karol Herbst <kherbst@redhat.com> Cc: dann frazier <dann.frazier@canonical.com> Cc: dri-devel <dri-devel@lists.freedesktop.org> Cc: Dave Airlie <airlied@redhat.com> Cc: stable@vger.kernel.org Reviewed-by: Jeremy Cline <jcline@redhat.com> Signed-off-by: Dave Airlie <airlied@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20201006220528.13925-1-kherbst@redhat.com
-
Namjae Jeon authored
syzbot reported warning message: Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1d6/0x29e lib/dump_stack.c:118 register_lock_class+0xf06/0x1520 kernel/locking/lockdep.c:893 __lock_acquire+0xfd/0x2ae0 kernel/locking/lockdep.c:4320 lock_acquire+0x148/0x720 kernel/locking/lockdep.c:5029 __raw_spin_lock include/linux/spinlock_api_smp.h:142 [inline] _raw_spin_lock+0x2a/0x40 kernel/locking/spinlock.c:151 spin_lock include/linux/spinlock.h:354 [inline] exfat_cache_inval_inode+0x30/0x280 fs/exfat/cache.c:226 exfat_evict_inode+0x124/0x270 fs/exfat/inode.c:660 evict+0x2bb/0x6d0 fs/inode.c:576 exfat_fill_super+0x1e07/0x27d0 fs/exfat/super.c:681 get_tree_bdev+0x3e9/0x5f0 fs/super.c:1342 vfs_get_tree+0x88/0x270 fs/super.c:1547 do_new_mount fs/namespace.c:2875 [inline] path_mount+0x179d/0x29e0 fs/namespace.c:3192 do_mount fs/namespace.c:3205 [inline] __do_sys_mount fs/namespace.c:3413 [inline] __se_sys_mount+0x126/0x180 fs/namespace.c:3390 do_syscall_64+0x31/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 If exfat_read_root() returns an error, spinlock is used in exfat_evict_inode() without initialization. This patch combines exfat_cache_init_inode() with exfat_inode_init_once() to initialize spinlock by slab constructor. Fixes: c35b6810 ("exfat: add exfat cache") Cc: stable@vger.kernel.org # v5.7+ Reported-by: syzbot <syzbot+b91107320911a26c9a95@syzkaller.appspotmail.com> Signed-off-by: Namjae Jeon <namjae.jeon@samsung.com>
-