Switching from a separate list to flags introduced a bug here.

We were accidentially ORing the flag before initailizing the placement
and not after. So this code didn't do nothing except producing a
warning.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Fixes: a78a8da5 ("drm/ttm: replace busy placement with flags v6")
Link: https://patchwork.freedesktop.org/patch/msgid/20240226142759.93130-1-christian.koenig@amd.com
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>	# compile only
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>

The resource is inclusive of the ->start and ->end addresses so this
calculation is not correct.  It should be "res->end - res->start + 1".
Use the resource_size() to do the calculation.

Fixes: 90393c9b ("drm/imx/dcss: request memory region")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Signed-off-by: Laurentiu Palcu <laurentiu.palcu@oss.nxp.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4914592b-4256-4c9c-bc1d-6dec1e473831@moroto.mountain

This error path accidentally returns success when it should preserve the
error code from sysfb_parent_dev().

Fixes: 4e754597 ("firmware/sysfb: Create firmware device only for enabled PCI devices")
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/aaaa2e13-849b-41a0-8186-25f3d2a16f86@moroto.mountain

Backmerging from drm/drm-next to prepare drm-misc-next-fixes for
the rest of the release cycle.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>

Thomas Zimmermann asked to backmerge -rc6 for drm-misc branches,
there's a few same-area-changed conflicts (xe and amdgpu mostly) that
are getting a bit too annoying.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'drm-habanalabs-next-2024-02-26' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux into drm-next

This tag contains habanalabs driver and accel changes for v6.9.

The notable changes are:

- New features and improvements:
  - Configure interrupt affinity according to NUMA nodes for the MSI-X interrupts that are
    assigned to the userspace application which acquires the device.
  - Move the HBM MMU page tables to reside inside the HBM to minimize latency when doing
    page-walks.
  - Improve the device reset mechanism when consecutive heartbeat failures occur (firmware
    fails to ack on heartbeat message).
  - Check also extended errors in the PCIe addr_dec interrupt information.
  - Rate limit the error messages that can be printed to dmesg log by userspace actions.

- Firmware related fixes:
  - Handle requests from firmware to reserve device memory

- Bug fixes and code cleanups:
  - constify the struct device_type usage in accel (accel_sysfs_device_minor).
  - Fix the PCI health check by reading uncached register.
  - Fix reporting of drain events.
  - Fix debugfs files permissions.
  - Fix calculation of DRAM BAR base address.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Oded Gabbay <ogabbay@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/ZdxJprop0EniVQtf@ogabbay-vm-u22.habana-labs.com

drm/xe feature pull for v6.9:

UAPI Changes:

- New query to the GuC firmware submission version. (José Roberto de Souza)
- Remove unused persistent exec_queues (Thomas Hellström)
- Add vram frequency sysfs attributes (Sujaritha Sundaresan, Rodrigo Vivi)
- Add the flag XE_VM_BIND_FLAG_DUMPABLE to notify devcoredump that mapping
  should be dumped (Maarten Lankhorst)

Cross-drivers Changes:

- Make sure intel_wakeref_t is treated as opaque type on i915-display
  and fix its type on xe

Driver Changes:

- Drop pre-production workarounds (Matt Roper)
- Drop kunit tests for unsuported platforms: PVC and pre-production DG2 (Lucas De Marchi)
- Start pumbling SR-IOV support with memory based interrupts
  for VF (Michal Wajdeczko)
- Allow to map BO in GGTT with PAT index corresponding to
  XE_CACHE_UC to work with memory based interrupts (Michal Wajdeczko)
- Improve logging with GT-oriented drm_printers (Michal Wajdeczko)
- Add GuC Doorbells Manager as prep work SR-IOV during
  VF provisioning ((Michal Wajdeczko)
- Refactor fake device handling in kunit integration ((Michal Wajdeczko)
- Implement additional workarounds for xe2 and MTL (Tejas Upadhyay,
  Lucas De Marchi, Shekhar Chauhan, Karthik Poosa)
- Program a few registers according to perfomance guide spec for Xe2 (Shekhar Chauhan)
- Add error handling for non-blocking communication with GuC (Daniele Ceraolo Spurio)
- Fix remaining 32b build issues and enable it back (Lucas De  Marchi)
- Fix build with CONFIG_DEBUG_FS=n (Jani Nikula)
- Fix warnings from GuC ABI headers (Matthew Brost)
- Introduce Relay Communication for SR-IOV for VF <-> GuC <-> PF (Michal Wajdeczko)
- Add mocs reset kunit (Ruthuvikas Ravikumar)
- Fix spellings (Colin Ian King)
- Disable mid-thread preemption when not properly supported by hardware (Nirmoy Das)
- Release mmap mappings on rpm suspend (Badal Nilawar)
- Fix BUG_ON on xe_exec by moving fence reservation to the validate stage (Matthew Auld)
- Fix xe_exec by reserving extra fence slot for CPU bind (Matthew Brost)
- Fix xe_exec with full long running exec queue, now returning
  -EWOULDBLOCK to userspace (Matthew Brost)
- Fix CT irq handler when CT is disabled (Matthew Brost)
- Fix VM_BIND_OP_UNMAP_ALL without any bound vmas (Thomas Hellström)
- Fix missing __iomem annotations (Thomas Hellström)
- Fix exec queue priority handling with GuC (Brian Welty)
- Fix setting SLPC flag to GuC when it's not supported (Vinay Belgaumkar)
- Fix C6 disabling without SLPC (Matt Roper)
- Drop -Wstringop-overflow to fix build with GCC11 (Paul E. McKenney)
- Circumvent bogus -Wstringop-overflow in one case (Arnd Bergmann)
- Refactor exec_queue user extensions handling and fix USM attributes
  being applied too late (Brian Welty)
- Use circ_buf head/tail convention (Matthew Brost)
- Fail build if circ_buf-related defines are modified with incompatible values
  (Matthew Brost)
- Fix several error paths (Dan Carpenter)
- Fix CCS copy for small VRAM copy chunks (Thomas Hellström)
- Rework driver initialization order and paths to account for driver running
  in VF mode (Michal Wajdeczko)
- Initialize GuC earlier during probe to handle driver in VF mode (Michał Winiarski)
- Fix migration use of MI_STORE_DATA_IMM to write PTEs (Matt Roper)
- Fix bounds checking in __xe_bo_placement_for_flags (Brian Welty)
- Drop display dependency on CONFIG_EXPERT (Jani Nikula)
- Do not hand-roll kstrdup when creating snapshot (Michal Wajdeczko)
- Stop creating one kunit module per kunit suite (Lucas De Marchi)
- Reduce scope and constify variables (Thomas Hellström, Jani Nikula, Michal Wajdeczko)
- Improve and document xe_guc_ct_send_recv() (Michal Wajdeczko)
- Add proxy communication between CSME and GSC uC (Daniele Ceraolo Spurio)
- Fix size calculation when writing pgtable (Fei Yang)
- Make sure cfb is page size aligned in stolen memory (Vinod Govindapillai)
- Stop printing guc log to dmesg when waiting for GuC fails (Rodrigo Vivi)
- Use XE_CACHE_WB instead of XE_CACHE_NONE for cpu coherency on migration
  (Himal Prasad Ghimiray)
- Fix error path in xe_vm_create (Moti Haimovski)
- Fix warnings in doc generation (Thomas Hellström, Badal Nilawar)
- Improve devcoredump content for mesa debugging (José Roberto de Souza)
- Fix crash in trace_dma_fence_init() (José Roberto de Souza)
- Improve CT state change handling (Matthew Brost)
- Toggle USM support for Xe2 (Lucas De Marchi)
- Reduces code duplication to emit PIPE_CONTROL (José Roberto de Souza)
- Canonicalize addresses where needed for Xe2 and add to devcoredump
  (José Roberto de Souza)
- Only allow 1 ufence per exec / bind IOCTL (Matthew Brost)
- Move all display code to display/ (Jani Nikula)
- Fix sparse warnings by correctly using annotations (Thomas Hellström)
- Warn on job timeouts instead of using asserts (Matt Roper)
- Prefix macros to avoid clashes with sparc (Matthew Brost)
- Fix -Walloc-size by subclassing instead of allocating size smaller than struct (Thomas Hellström)
- Add status check during gsc header readout (Suraj Kandpal)
- Fix infinite loop in vm_bind_ioctl_ops_unwind() (Matthew Brost)
- Fix fence refcounting (Matthew Brost)
- Fix picking incorrect userptr VMA (Matthew Brost)
- Fix USM on integrated by mapping both mem.kernel_bb_pool and usm.bb_pool (Matthew Brost)
- Fix double initialization of display power domains (Xiaoming Wang)
- Check expected uC versions by major.minor.patch instead of just major.minor (John Harrison)
- Bump minimum GuC version to 70.19.2 for all platforms under force-probe
  (John Harrison)
- Add GuC firmware loading for Lunar Lake (John Harrison)
- Use kzalloc() instead of hand-rolled alloc + memset (Nirmoy Das)
- Fix max page size of VMA during a REMAP (Matthew Brost)
- Don't ignore error when pinning pages in kthread (Matthew Auld)
- Refactor xe hwmon (Karthik Poosa)
- Add debug logs for D3cold (Riana Tauro)
- Remove broken TEST_VM_ASYNC_OPS_ERROR (Matthew Brost)
- Always allow to override firmware blob with module param and improve
  log when no firmware is found (Lucas De Marchi)
- Fix shift-out-of-bounds due to xe_vm_prepare_vma() accepting zero fences (Thomas Hellström)
- Fix shift-out-of-bounds by distinguishing xe_pt/xe_pt_dir subclass (Thomas Hellström)
- Fail driver bind if platform supports MSIX, but fails to allocate all of them (Dani Liberman)
- Fix intel_fbdev thinking memory is backed by shmem (Matthew Auld)
- Prefer drm_dbg() over dev_dbg() (Jani Nikula)
- Avoid function cast warnings with clang-16 (Arnd Bergmann)
- Enhance xe_bo_move trace (Priyanka Dandamudi)
- Fix xe_vma_set_pte_size() not setting the right gpuva.flags for 4K size (Matthew Brost)
- Add XE_VMA_PTE_64K VMA flag (Matthew Brost)
- Return 2MB page size for compact 64k PTEs (Matthew Brost)
- Remove usage of the deprecated ida_simple_xx() API (Christophe JAILLET)
- Fix modpost warning on xe_mocs live kunit module (Ashutosh Dixit)
- Drop extra newline in from sysfs files (Ashutosh Dixit)
- Implement VM snapshot support for BO's and userptr (Maarten Lankhorst)
- Add debug logs when skipping rebinds (Matthew Brost)
- Fix code generation when mixing build directories (Dafna Hirschfeld)
- Prefer struct_size over open coded arithmetic (Erick Archer)
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/dbdkrwmcoqqlwftuc3olbauazc3pbamj26wa34puztowsnauoh@i3zms7ut4yuw

drm-misc-next for v6.9:

UAPI Changes:

- changes to fdinfo stats

Cross-subsystem Changes:

agp:
- remove unused type field from struct agp_bridge_data

Core Changes:

ci:
- update test names
- cleanups

gem:
- add stats for shared buffers plus updates to amdgpu, i915, xe

Documentation:
- fixes

syncobj:
- fixes to waiting and sleeping

Driver Changes:

bridge:
- adv7511: fix crash on irq during probe
- dw_hdmi: set bridge type

host1x:
- cleanups

ivpu:
- updates to firmware API
- refactor BO allocation

meson:
- fix error handling in probe

panel:
- revert "drm/panel-edp: Add auo_b116xa3_mode"
- add Himax HX83112A plus DT bindings
- ltk500hd1829: add support for ltk101b4029w and admatec 9904370
- simple: add BOE BP082WX1-100 8.2" panel plus DT bindungs

renesas:
- add RZ/G2L DU support plus DT bindings
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240222135841.GA6677@localhost.localdomain

Since commit aed65af1 ("drivers: make device_type const"), the driver
core can properly handle constant struct device_type. Move the
accel_sysfs_device_minor variable to be a constant structure as well,
placing it into read-only memory which can not be modified at runtime.

Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Ricardo B. Marliere <ricardo@marliere.net>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Today we read PCI VENDOR-ID in order to make sure PCI link is
healthy. Apparently the VENDOR-ID might be stored on host and
hence, when we read it we might not access the PCI bus.
In order to make sure PCI health check is reliable, we will start
checking the DEVICE-ID instead.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The reserved memory for FW is currently saved in an ASIC property in
units of MB, just like the value that comes from FW.
Except the fact that it is not clear from the property's name, it means
also that a calculation to actual size is required everywhere that it is
used.
Modify the property to hold the size in bytes.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Currently the reserved memory request from FW is handled when running
with preboot only, but this request is relevant also when running with
full FW.
Modify to always handle this reservation request.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Fetching sensor data can fail due to various reasons. In order
not to pollute the kernel log, those error prints must be
rate limited.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Due to a H/W issue, AXI drain event does not include a read/write
indication, hence we remove this print.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The unmasking is for event and it can be other event than RAZWI.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Prevent static analysis warning.
Signed-off-by: Tal Risin <trisin@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

debugfs files are created with permissions that don't align
with the access requirements.
Signed-off-by: Avri Kehat <akehat@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The glbl error cause handling has a wrong assumption that all error
bits are consecutive.
Fix the handling to check all relevant error bits per ASIC.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The FW interrupt info for a PCIe addr_dec event is set correctly, so
check for either global errors or razwi according to the indications
there.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Skip loading a linux FW image into the device with the current supported
ASICs is done for test purposes only.
Moreover, for future supported ASICs it is possible that there won't be
a need to load such an image.
The print in such a case is therefore not needed in most cases, so
replace the used dev_info() with dev_dbg().
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The hop size related properties is a MMU properties and not
asic properties.
As for PMMU and HMMU we could have different sizes.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Reviewed-by: Carl Vanderlip <quic_carlv@quicinc.com>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

As noted in the "Deprecated Interfaces, Language Features, Attributes,
and Conventions" documentation [1], size calculations (especially
multiplication) should not be performed in memory allocator (or similar)
function arguments due to the risk of them overflowing. This could lead
to values wrapping around and a smaller allocation being made than the
caller was expecting. Using those allocations could lead to linear
overflows of heap memory and other misbehaviors.

So, use the purpose specific kcalloc() function instead of the argument
size * count in the kzalloc() function.

Link: https://www.kernel.org/doc/html/next/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/162Signed-off-by: Erick Archer <erick.archer@gmx.com>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The pointer input is assigned a value that is not read, it is
being re-assigned again later with the same value. Resolve this
by moving the declaration to input into the if block.

Cleans up clang scan build warning:
warning: Value stored to 'input' during its initialization is never
read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@intel.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

gaudi2_memset_memory_chunk_using_edma_qm() calls the access_dev_mem()
ASIC function, but ignores its return value.
Add this missing check.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

In newer kernel versions, irq_set_affinity_hint() is deprecated.
Instead, use the newer version which is irq_set_affinity_and_hint().
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The coding style in the Linux kernel prefers not to use
braces for single-statement if conditions.
This patch removes the unnecessary braces from an if statement
in the file drivers/accel/habanalabs/common/command_submission.c,
which also resolves a coding style warning.
Signed-off-by: Malkoot Khan <engr.mkhan1990@gmail.com>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Currently the HMMU page tables reside in the host memory,
which will cause host access from the device for every page walk.
This can affect PCIe bandwidth in certain scenarios.

To prevent that problem, HMMU page tables will be moved to the device
memory so the miss transaction will read the hops from there instead of
going to the host.
Signed-off-by: Farah Kassabri <fkassabri@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

The mechanism of aborting device reset for consecutive fatal errors is
currently only for fatal errors that are reported by FW.
A non-responsive FW and consecutive heartbeat failures is also
considered fatal, so add them as well to this mechanism to avoid
recurring device reset in such a case.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

When the DRAM region size in the BAR is not a power of 2, calculating
the corresponding BAR base address should be done using the offset from
the DRAM start address, and not using directly the DRAM address.
Signed-off-by: Tomer Tayar <ttayar@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Fix a warning of a buffer overflow:
‘snprintf’ output between 38 and 47 bytes into a destination of size 32
Signed-off-by: Koby Elbaz <kelbaz@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

User interrupts are MSIx interrupts coming from Gaudi2, that have
specific range of IDs and are assigned to the sole use of the user
process that opened the Gaudi2 device (reminder: there can be only
a single user process running on Gaudi2 at any given time).

The interrupts are allocated and managed by the driver and therefore,
the user expects the driver to initialize them properly, which also
includes setting the affinity to the related CPU cores of the
device's NUMA node to get maximum performance.
Signed-off-by: Dani Liberman <dliberman@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>

Pull bcachefs fixes from Kent Overstreet:
 "Some more mostly boring fixes, but some not

  User reported ones:

   - the BTREE_ITER_FILTER_SNAPSHOTS one fixes a really nasty
     performance bug; user reported an untar initially taking two
     seconds and then ~2 minutes

   - kill a __GFP_NOFAIL in the buffered read path; this was a leftover
     from the trickier fix to kill __GFP_NOFAIL in readahead, where we
     can't return errors (and have to silently truncate the read
     ourselves).

     bcachefs can't use GFP_NOFAIL for folio state unlike iomap based
     filesystems because our folio state is just barely too big, 2MB
     hugepages cause us to exceed the 2 page threshhold for GFP_NOFAIL.

     additionally, the flags argument was just buggy, we weren't
     supplying GFP_KERNEL previously (!)"

* tag 'bcachefs-2024-02-25' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: fix bch2_save_backtrace()
  bcachefs: Fix check_snapshot() memcpy
  bcachefs: Fix bch2_journal_flush_device_pins()
  bcachefs: fix iov_iter count underflow on sub-block dio read
  bcachefs: Fix BTREE_ITER_FILTER_SNAPSHOTS on inodes btree
  bcachefs: Kill __GFP_NOFAIL in buffered read path
  bcachefs: fix backpointer_to_text() when dev does not exist

Missed a call in the previous fix.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>

Pull two documentation build fixes from Jonathan Corbet:

 - The XFS online fsck documentation uses incredibly deeply nested
   subsection and list nesting; that broke the PDF docs build. Tweak a
   parameter to tell LaTeX to allow the deeper nesting.

 - Fix a 6.8 PDF-build regression

* tag 'docs-6.8-fixes3' of git://git.lwn.net/linux:
  docs: translations: use attribute to store current language
  docs: Instruct LaTeX to cope with deeper nesting

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 6.8-rc6 to resolve some reported
  problems. These include:

   - regression fixes with typec tpcm code as reported by many

   - cdnsp and cdns3 driver fixes

   - usb role setting code bugfixes

   - build fix for uhci driver

   - ncm gadget driver bugfix

   - MAINTAINERS entry update

  All of these have been in linux-next all week with no reported issues
  and there is at least one fix in here that is in Thorsten's regression
  list that is being tracked"

* tag 'usb-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  usb: typec: tpcm: Fix issues with power being removed during reset
  MAINTAINERS: Drop myself as maintainer of TYPEC port controller drivers
  usb: gadget: ncm: Avoid dropping datagrams of properly parsed NTBs
  Revert "usb: typec: tcpm: reset counter when enter into unattached state after try role"
  usb: gadget: omap_udc: fix USB gadget regression on Palm TE
  usb: dwc3: gadget: Don't disconnect if not started
  usb: cdns3: fix memory double free when handle zero packet
  usb: cdns3: fixed memory use after free at cdns3_gadget_ep_disable()
  usb: roles: don't get/set_role() when usb_role_switch is unregistered
  usb: roles: fix NULL pointer issue when put module's reference
  usb: cdnsp: fixed issue with incorrect detecting CDNSP family controllers
  usb: cdnsp: blocked some cdns3 specific code
  usb: uhci-grlib: Explicitly include linux/platform_device.h

Pull tty/serial driver fixes from Greg KH:
 "Here are three small serial/tty driver fixes for 6.8-rc6 that resolve
  the following reported errors:

   - riscv hvc console driver fix that was reported by many

   - amba-pl011 serial driver fix for RS485 mode

   - stm32 serial driver fix for RS485 mode

  All of these have been in linux-next all week with no reported
  problems"

* tag 'tty-6.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: amba-pl011: Fix DMA transmission in RS485 mode
  serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled
  tty: hvc: Don't enable the RISC-V SBI console by default

Pull x86 fixes from Borislav Petkov:

 - Make sure clearing CPU buffers using VERW happens at the latest
   possible point in the return-to-userspace path, otherwise memory
   accesses after the VERW execution could cause data to land in CPU
   buffers again

* tag 'x86_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  KVM/VMX: Move VERW closer to VMentry for MDS mitigation
  KVM/VMX: Use BT+JNC, i.e. EFLAGS.CF to select VMRESUME vs. VMLAUNCH
  x86/bugs: Use ALTERNATIVE() instead of mds_user_clear static key
  x86/entry_32: Add VERW just before userspace transition
  x86/entry_64: Add VERW just before userspace transition
  x86/bugs: Add asm helpers for executing VERW

Pull irq fixes from Borislav Petkov:

 - Make sure GICv4 always gets initialized to prevent a kexec-ed kernel
   from silently failing to set it up

 - Do not call bus_get_dev_root() for the mbigen irqchip as it always
   returns NULL - use NULL directly

 - Fix hardware interrupt number truncation when assigning MSI
   interrupts

 - Correct sending end-of-interrupt messages to disabled interrupts
   lines on RISC-V PLIC

* tag 'irq_urgent_for_v6.8_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Do not assume vPE tables are preallocated
  irqchip/mbigen: Don't use bus_get_dev_root() to find the parent
  PCI/MSI: Prevent MSI hardware interrupt number truncation
  irqchip/sifive-plic: Enable interrupt if needed before EOI

Pull erofs fix from Gao Xiang:

 - Fix page refcount leak when looking up specific inodes
   introduced by metabuf reworking

* tag 'erofs-for-6.8-rc6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs:
  erofs: fix refcount on the metabuf used for inode lookup