- 04 Feb, 2021 1 commit
-
-
Bert Vermeulen authored
Document the binding for the Realtek RTL838x/RTL839x interrupt controller. Reviewed-by:
Rob Herring <robh@kernel.org> Signed-off-by:
Bert Vermeulen <bert@biot.com> [maz: Add a commit message, as the author couldn't be bothered...] Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210122204224.509124-2-bert@biot.com
-
- 29 Jan, 2021 1 commit
-
-
Biwen Li authored
The ls-extirq driver doesn't implement the irq_set_wake() callback, while being wake-up capable. This results in ugly behaviours across suspend/resume cycles. Advertise this by adding IRQCHIP_SKIP_SET_WAKE to the irqchip flags Fixes: b16a1caf ("irqchip/ls-extirq: Add LS1043A, LS1088A external interrupt support") Signed-off-by:
Biwen Li <biwen.li@nxp.com> Signed-off-by:
-
- 26 Jan, 2021 2 commits
-
-
Vinod Koul authored
Add the compatible string for SM8350 SoC from Qualcomm. Signed-off-by:
Vinod Koul <vkoul@kernel.org> Acked-by:
-
Vinod Koul authored
Add the compatible string for SM8250 SoC from Qualcomm. This compatible is used already in DTS files but not documented yet Signed-off-by:
Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by:
-
- 21 Jan, 2021 7 commits
-
-
Samuel Holland authored
Maintain bitmaps of wake-enabled IRQs and mux inputs, and program them to the hardware during the syscore phase of suspend and shutdown. Then restore the original set of enabled IRQs (only the NMI) during resume. This serves two purposes. First, it lets power management firmware running on the ARISC coprocessor know which wakeup sources Linux wants to have enabled. That way, it can avoid turning them off when it shuts down the remainder of the clock tree. Second, it preconfigures the coprocessor's interrupt controller, so the firmware's wakeup logic is as simple as waiting for an interrupt to arrive. The suspend/resume logic is not conditional on PM_SLEEP because it is identical to the init/shutdown logic. Wake IRQs may be enabled during shutdown to allow powering the board back on. As an example, see commit a5c5e50c ("Input: gpio-keys - add shutdown callback"). Acked-by:
Maxime Ripard <mripard@kernel.org> Signed-off-by:
Samuel Holland <samuel@sholland.org> Signed-off-by:
-
Samuel Holland authored
The R_INTC in the A31 and newer sun8i/sun50i SoCs is more similar to the original sun4i interrupt controller than the sun7i/sun9i NMI controller. It is used for two distinct purposes: - To control the trigger, latch, and mask for the NMI input pin - To provide the interrupt input for the ARISC coprocessor As this interrupt controller is not documented, information about it comes from vendor-provided firmware blobs and from experimentation. Differences from the sun4i interrupt controller appear to be: - It only has one or two registers of each kind (max 32 or 64 IRQs) - Multiplexing logic is added to support additional inputs - There is no FIQ-related logic - There is no interrupt priority logic In order to fulfill its two purposes, this hardware block combines four types of IRQs. First, the NMI pin is routed to the "IRQ 0" input on this chip, with a trigger type controlled by the NMI_CTRL_REG. The "IRQ 0 pending" output from this chip, if enabled, is then routed to a SPI IRQ input on the GIC. In other words, bit 0 of IRQ_ENABLE_REG *does* affect the NMI IRQ seen at the GIC. The NMI is followed by a contiguous block of 15 "direct" (my name for them) IRQ inputs that are connected in parallel to both R_INTC and the GIC. Or in other words, these bits of IRQ_ENABLE_REG *do not* affect the IRQs seen at the GIC. Following the direct IRQs are the ARISC's copy of banked IRQs for shared peripherals. These are not relevant to Linux. The remaining IRQs are connected to a multiplexer and provide access to the first (up to) 128 SPIs from the ARISC. This range of SPIs overlaps with the direct IRQs. Because of the 1:1 correspondence between R_INTC and GIC inputs, this is a perfect scenario for using a stacked irqchip driver. We want to hook into setting the NMI trigger type, but not actually handle any IRQ here. To allow access to all multiplexed IRQs, this driver requires a new binding where the interrupt number matches the GIC interrupt number. (This moves the NMI from number 0 to 32 or 96, depending on the SoC.) For simplicity, copy the three-cell GIC binding; this disambiguates interrupt 0 in the old binding (the NMI) from interrupt 0 in the new binding (SPI 0) by the number of cells. Since R_INTC is in the always-on power domain, and its output is visible to the power management coprocessor, a stacked irqchip driver provides a simple way to add wakeup support to any of its IRQs. That is the next patch; for now, just the NMI is moved over. This commit mostly reverts commit 173bda53 ("irqchip/sunxi-nmi: Support sun6i-a31-r-intc compatible"). Acked-by:
-
Samuel Holland authored
The Allwinner H3 SoC contains an R_INTC that is, as far as we know, compatible with the R_INTC present in other sun8i SoCs starting with the A31. Since the R_INTC hardware is undocumented, introduce a new compatible for the R_INTC variant in this SoC, in case there turns out to be some difference. Acked-by:
-
Samuel Holland authored
The R_INTC in the A31 and newer sun8i/sun50i SoCs has additional functionality compared to the sun7i/sun9i NMI controller. Among other things, it multiplexes access to up to 128 interrupts corresponding to (and in parallel to) the first 128 GIC SPIs. This means the NMI is no longer the lowest-numbered hwirq at this irqchip, since it is SPI 32 or 96 (depending on SoC). hwirq 0 now corresponds to SPI 0, usually UART0. To allow access to all multiplexed IRQs, the R_INTC requires a new binding where the interrupt number matches the GIC interrupt number. Otherwise, interrupts with hwirq numbers below the NMI would not be representable in the device tree. For simplicity, copy the three-cell GIC binding; this disambiguates interrupt 0 in the old binding (the NMI) from interrupt 0 in the new binding (SPI 0) by the number of cells. Because the H6 R_INTC has a different mapping from multiplexed IRQs to top-level register bits, it is no longer compatible with the A31 R_INTC. Acked-by:
-
Lorenzo Pieralisi authored
The GICv3 driver explanation related to PMR/RPR and SCR_EL3.FIQ secure/non-secure priority handling contains a couple of typos. Fix them. Signed-off-by:
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Marc Zyngier <maz@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
The CSR SiRF prima2/atlas platforms are getting removed, so this driver is no longer needed. Cc: Barry Song <baohua@kernel.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Acked-by:
Barry Song <baohua@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
The tango platform is getting removed, so the driver is no longer needed. Cc: Marc Gonzalez <marc.w.gonzalez@free.fr> Cc: Mans Rullgard <mans@mansr.com> Signed-off-by:
Mans Rullgard <mans@mansr.com> Signed-off-by:
-
- 18 Jan, 2021 1 commit
-
-
Linus Torvalds authored
-
- 17 Jan, 2021 4 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linuxLinus Torvalds authored
Pull perf tools fixes from Arnaldo Carvalho de Melo: - Fix 'CPU too large' error in Intel PT - Correct event attribute sizes in 'perf inject' - Sync build_bug.h and kvm.h kernel copies - Fix bpf.h header include directive in 5sec.c 'perf trace' bpf example - libbpf tests fixes - Fix shadow stat 'perf test' for non-bash shells - Take cgroups into account for shadow stats in 'perf stat' * tag 'perf-tools-fixes-2021-01-17' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: perf inject: Correct event attribute sizes perf intel-pt: Fix 'CPU too large' error perf stat: Take cgroups into account for shadow stats perf stat: Introduce struct runtime_stat_data libperf tests: Fail when failing to get a tracepoint id libperf tests: If a test fails return non-zero libperf tests: Avoid uninitialized variable warning perf test: Fix shadow stat test for non-bash shells tools headers: Syncronize linux/build_bug.h with the kernel sources tools headers UAPI: Sync kvm.h headers with the kernel sources perf bpf examples: Fix bpf.h header include directive in 5sec.c example
-
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linuxLinus Torvalds authored
Pull powerpc fixes from Michael Ellerman: "One fix for a lack of alignment in our linker script, that can lead to crashes depending on configuration etc. One fix for the 32-bit VDSO after the C VDSO conversion. Thanks to Andreas Schwab, Ariel Marcovitch, and Christophe Leroy" * tag 'powerpc-5.11-4' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/vdso: Fix clock_gettime_fallback for vdso32 powerpc: Fix alignment bug within the init sections
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull misc vfs fixes from Al Viro: "Several assorted fixes. I still think that audit ->d_name race is better fixed this way for the benefit of backports, with any possibly fancier variants done on top of it" * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: dump_common_audit_data(): fix racy accesses to ->d_name iov_iter: fix the uaccess area in copy_compat_iovec_from_user umount(2): move the flag validity checks first
-
Linus Torvalds authored
So technically there is nothing wrong with adding a pinned page to the swap cache, but the pinning obviously means that the page can't actually be free'd right now anyway, so it's a bit pointless. However, the real problem is not with it being a bit pointless: the real issue is that after we've added it to the swap cache, we'll try to unmap the page. That will succeed, because the code in mm/rmap.c doesn't know or care about pinned pages. Even the unmapping isn't fatal per se, since the page will stay around in memory due to the pinning, and we do hold the connection to it using the swap cache. But when we then touch it next and take a page fault, the logic in do_swap_page() will map it back into the process as a possibly read-only page, and we'll then break the page association on the next COW fault. Honestly, this issue could have been fixed in any of those other places: (a) we could refuse to unmap a pinned page (which makes conceptual sense), or (b) we could make sure to re-map a pinned page writably in do_swap_page(), or (c) we could just make do_wp_page() not COW the pinned page (which was what we historically did before that "mm: do_wp_page() simplification" commit). But while all of them are equally valid models for breaking this chain, not putting pinned pages into the swap cache in the first place is the simplest one by far. It's also the safest one: the reason why do_wp_page() was changed in the first place was that getting the "can I re-use this page" wrong is so fraught with errors. If you do it wrong, you end up with an incorrectly shared page. As a result, using "page_maybe_dma_pinned()" in either do_wp_page() or do_swap_page() would be a serious bug since it is only a (very good) heuristic. Re-using the page requires a hard black-and-white rule with no room for ambiguity. In contrast, saying "this page is very likely dma pinned, so let's not add it to the swap cache and try to unmap it" is an obviously safe thing to do, and if the heuristic might very rarely be a false positive, no harm is done. Fixes: 09854ba9 ("mm: do_wp_page() simplification") Reported-and-tested-by:
Martin Raiber <martin@urbackup.org> Cc: Pavel Begunkov <asml.silence@gmail.com> Cc: Jens Axboe <axboe@kernel.dk> Cc: Peter Xu <peterx@redhat.com> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- 16 Jan, 2021 12 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds authored
Pull SCSI fixes from James Bottomley: "Nine minor fixes, seven in drivers and two in the core SCSI disk driver (sd) which should be harmless involving removing an unused variable and quietening a spurious warning" Signed-off-by:
James E.J. Bottomley <jejb@linux.ibm.com> * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: sd: Remove obsolete variable in sd_remove() scsi: sd: Suppress spurious errors when WRITE SAME is being disabled scsi: scsi_debug: Fix memleak in scsi_debug_init() scsi: mpt3sas: Fix spelling mistake in Kconfig "compatiblity" -> "compatibility" scsi: qedi: Correct max length of CHAP secret scsi: ufs: Correct the LUN used in eh_device_reset_handler() callback scsi: ufs: Relocate flush of exceptional event scsi: ufs: Relax the condition of UFSHCI_QUIRK_SKIP_MANUAL_WB_FLUSH_CTRL scsi: ufs: Fix possible power drain during system suspend
-
Al Viro authored
We are not guaranteed the locking environment that would prevent dentry getting renamed right under us. And it's possible for old long name to be freed after rename, leading to UAF here. Cc: stable@kernel.org # v2.6.2+ Signed-off-by:Al Viro <viro@zeniv.linux.org.uk>
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull block fixes from Jens Axboe: "Just an nvme pull request via Christoph: - don't initialize hwmon for discover controllers (Sagi Grimberg) - fix iov_iter handling in nvme-tcp (Sagi Grimberg) - fix a preempt warning in nvme-tcp (Sagi Grimberg) - fix a possible NULL pointer dereference in nvme (Israel Rukshin)" * tag 'block-5.11-2021-01-16' of git://git.kernel.dk/linux-block: nvme: don't intialize hwmon for discovery controllers nvme-tcp: fix possible data corruption with bio merges nvme-tcp: Fix warning with CONFIG_DEBUG_PREEMPT nvmet-rdma: Fix NULL deref when setting pi_enable and traddr INADDR_ANY
-
git://git.kernel.dk/linux-blockLinus Torvalds authored
Pull io_uring fixes from Jens Axboe: "We still have a pending fix for a cancelation issue, but it's still being investigated. In the meantime: - Dead mm handling fix (Pavel) - SQPOLL setup error handling (Pavel) - Flush timeout sequence fix (Marcelo) - Missing finish_wait() for one exit case" * tag 'io_uring-5.11-2021-01-16' of git://git.kernel.dk/linux-block: io_uring: ensure finish_wait() is always called in __io_uring_task_cancel() io_uring: flush timeouts that should already have expired io_uring: do sqo disable on install_fd error io_uring: fix null-deref in io_disable_sqo_submit io_uring: don't take files/mm for a dead task io_uring: drop mm and files after task_work_run
-
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linuxLinus Torvalds authored
Pull RISC-V fixes from Palmer Dabbelt: "There are a few more fixes than a normal rc4, largely due to the bubble introduced by the holiday break: - return -ENOSYS for syscall number -1, which previously returned an uninitialized value. - ensure of_clk_init() has been called in time_init(), without which clock drivers may not be initialized. - fix sifive,uart0 driver to properly display the baud rate. A fix to initialize MPIE that allows interrupts to be processed during system calls. - avoid erronously begin tracing IRQs when interrupts are disabled, which at least triggers suprious lockdep failures. - workaround for a warning related to calling smp_processor_id() while preemptible. The warning itself is suprious on currently availiable systems. - properly include the generic time VDSO calls. A fix to our kasan address mapping. A fix to the HiFive Unleashed device tree, which allows the Ethernet PHY to be properly initialized by Linux (as opposed to relying on the bootloader). - defconfig update to include SiFive's GPIO driver, which is present on the HiFive Unleashed and necessary to initialize the PHY. - avoid allocating memory while initializing reserved memory. - avoid allocating the last 4K of memory, as pointers there alias with syscall errors. There are also two cleanups that should have no functional effect but do fix build warnings: - drop a duplicated definition of PAGE_KERNEL_EXEC. - properly declare the asm register SP shim. - cleanup the rv32 memory size Kconfig entry, to reflect the actual size of memory availiable" * tag 'riscv-for-linus-5.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: RISC-V: Fix maximum allowed phsyical memory for RV32 RISC-V: Set current memblock limit RISC-V: Do not allocate memblock while iterating reserved memblocks riscv: stacktrace: Move register keyword to beginning of declaration riscv: defconfig: enable gpio support for HiFive Unleashed dts: phy: add GPIO number and active state used for phy reset dts: phy: fix missing mdio device and probe failure of vsc8541-01 device riscv: Fix KASAN memory mapping. riscv: Fixup CONFIG_GENERIC_TIME_VSYSCALL riscv: cacheinfo: Fix using smp_processor_id() in preemptible riscv: Trace irq on only interrupt is enabled riscv: Drop a duplicated PAGE_KERNEL_EXEC riscv: Enable interrupts during syscalls with M-Mode riscv: Fix sifive serial driver riscv: Fix kernel time_init() riscv: return -ENOSYS for syscall -1 -
Linus Torvalds authored
Turning a pinned page read-only breaks the pinning after COW. Don't do it. The whole "track page soft dirty" state doesn't work with pinned pages anyway, since the page might be dirtied by the pinning entity without ever being noticed in the page tables. Signed-off-by: -
Linus Torvalds authored
Turning page table entries read-only requires the mmap_sem held for writing. So stop doing the odd games with turning things from read locks to write locks and back. Just get the write lock. Signed-off-by: -
Atish Patra authored
Linux kernel can only map 1GB of address space for RV32 as the page offset is set to 0xC0000000. The current description in the Kconfig is confusing as it indicates that RV32 can support 2GB of physical memory. That is simply not true for current kernel. In future, a 2GB split support can be added to allow 2GB physical address space. Reviewed-by:
Anup Patel <anup@brainfault.org> Signed-off-by:
Atish Patra <atish.patra@wdc.com> Signed-off-by:
Palmer Dabbelt <palmerdabbelt@google.com>
-
Atish Patra authored
Currently, linux kernel can not use last 4k bytes of addressable space because IS_ERR_VALUE macro treats those as an error. This will be an issue for RV32 as any memblock allocator potentially allocate chunk of memory from the end of DRAM (2GB) leading bad address error even though the address was technically valid. Fix this issue by limiting the memblock if available memory spans the entire address space. Reviewed-by:
-
Atish Patra authored
Currently, resource tree allocates memory blocks while iterating on the list. It leads to following kernel warning because memblock allocation also invokes memory block reservation API. [ 0.000000] ------------[ cut here ]------------ [ 0.000000] WARNING: CPU: 0 PID: 0 at kernel/resource.c:795 __insert_resource+0x8e/0xd0 [ 0.000000] Modules linked in: [ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 5.10.0-00022-ge20097fb37e2-dirty #549 [ 0.000000] epc: c00125c2 ra : c001262c sp : c1c01f50 [ 0.000000] gp : c1d456e0 tp : c1c0a980 t0 : ffffcf20 [ 0.000000] t1 : 00000000 t2 : 00000000 s0 : c1c01f60 [ 0.000000] s1 : ffffcf00 a0 : ffffff00 a1 : c1c0c0c4 [ 0.000000] a2 : 80c12b15 a3 : 80402000 a4 : 80402000 [ 0.000000] a5 : c1c0c0c4 a6 : 80c12b15 a7 : f5faf600 [ 0.000000] s2 : c1c0c0c4 s3 : c1c0e000 s4 : c1009a80 [ 0.000000] s5 : c1c0c000 s6 : c1d48000 s7 : c1613b4c [ 0.000000] s8 : 00000fff s9 : 80000200 s10: c1613b40 [ 0.000000] s11: 00000000 t3 : c1d4a000 t4 : ffffffff This is also unnecessary as we can pre-compute the total memblocks required for each memory region and allocate it before the loop. It save precious boot time not going through memblock allocation code every time. Fixes: 00ab027a ("RISC-V: Add kernel image sections to the resource tree") Reviewed-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
-
Christoph Hellwig authored
sizeof needs to be called on the compat pointer, not the native one. Fixes: 89cd35c5 ("iov_iter: transparently handle compat iovecs in import_iovec") Reported-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Linus Torvalds authored
Merge tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm Pull device mapper fixes from Mike Snitzer: - Fix DM-raid's raid1 discard limits so discards work. - Select missing Kconfig dependencies for DM integrity and zoned targets. - Four fixes for DM crypt target's support to optionally bypass kcryptd workqueues. - Fix DM snapshot merge supports missing data flushes before committing metadata. - Fix DM integrity data device flushing when external metadata is used. - Fix DM integrity's maximum number of supported constructor arguments that user can request when creating an integrity device. - Eliminate DM core ioctl logging noise when an ioctl is issued without required CAP_SYS_RAWIO permission. * tag 'for-5.11/dm-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: dm crypt: defer decryption to a tasklet if interrupts disabled dm integrity: fix the maximum number of arguments dm crypt: do not call bio_endio() from the dm-crypt tasklet dm integrity: fix flush with external metadata device dm: eliminate potential source of excessive kernel log noise dm snapshot: flush merged data before committing metadata dm crypt: use GFP_ATOMIC when allocating crypto requests from softirq dm crypt: do not wait for backlogged crypto request completion in softirq dm zoned: select CONFIG_CRC32 dm integrity: select CRYPTO_SKCIPHER dm raid: fix discard limits for raid1
-
- 15 Jan, 2021 12 commits
-
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "10 patches. Subsystems affected by this patch series: MAINTAINERS and mm (slub, pagealloc, memcg, kasan, vmalloc, migration, hugetlb, memory-failure, and process_vm_access)" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: mm/process_vm_access.c: include compat.h mm,hwpoison: fix printing of page flags MAINTAINERS: add Vlastimil as slab allocators maintainer mm/hugetlb: fix potential missing huge page size info mm: migrate: initialize err in do_migrate_pages mm/vmalloc.c: fix potential memory leak arm/kasan: fix the array size of kasan_early_shadow_pte[] mm/memcontrol: fix warning in mem_cgroup_page_lruvec() mm/page_alloc: add a missing mm_page_alloc_zone_locked() tracepoint mm, slub: consider rest of partial list if acquire_slab() fails
-
git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds authored
Pull rdma fixes from Jason Gunthorpe: "A fairly modest set of bug fixes, nothing abnormal from the merge window The ucma patch is a bit on the larger side, but given the regression was recently added I've opted to forward it to the rc stream. - Fix a ucma memory leak introduced in v5.9 while fixing the Syzkaller bugs - Don't fail when the xarray wraps for user verbs objects - User triggerable oops regression from the umem page size rework - Error unwind bugs in usnic, ocrdma, mlx5 and cma" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/cma: Fix error flow in default_roce_mode_store RDMA/mlx5: Fix wrong free of blue flame register on error IB/mlx5: Fix error unwinding when set_has_smi_cap fails RDMA/umem: Avoid undefined behavior of rounddown_pow_of_two() RDMA/ocrdma: Fix use after free in ocrdma_dealloc_ucontext_pd() RDMA/usnic: Fix memleak in find_free_vf_and_create_qp_grp RDMA/restrack: Don't treat as an error allocation ID wrapping RDMA/ucma: Do not miss ctx destruction steps in some cases -
Jens Axboe authored
If we enter with requests pending and performm cancelations, we'll have a different inflight count before and after calling prepare_to_wait(). This causes the loop to restart. If we actually ended up canceling everything, or everything completed in-between, then we'll break out of the loop without calling finish_wait() on the waitqueue. This can trigger a warning on exit_signals(), as we leave the task state in TASK_UNINTERRUPTIBLE. Put a finish_wait() after the loop to catch that case. Cc: stable@vger.kernel.org # 5.9+ Signed-off-by:Jens Axboe <axboe@kernel.dk>
-
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4Linus Torvalds authored
Pull ext4 fixes from Ted Ts'o: "A number of bug fixes for ext4: - Fix for the new fast_commit feature - Fix some error handling codepaths in whiteout handling and mountpoint sampling - Fix how we write ext4_error information so it goes through the journal when journalling is active, to avoid races that can lead to lost error information, superblock checksum failures, or DIF/DIX features" * tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: remove expensive flush on fast commit ext4: fix bug for rename with RENAME_WHITEOUT ext4: fix wrong list_splice in ext4_fc_cleanup ext4: use IS_ERR instead of IS_ERR_OR_NULL and set inode null when IS_ERR ext4: don't leak old mountpoint samples ext4: drop ext4_handle_dirty_super() ext4: fix superblock checksum failure when setting password salt ext4: use sbi instead of EXT4_SB(sb) in ext4_update_super() ext4: save error info to sb through journal if available ext4: protect superblock modifications with a buffer lock ext4: drop sync argument of ext4_commit_super() ext4: combine ext4_handle_error() and save_error_info() -
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull cifs fixes from Steve French: "Two small cifs fixes for stable (including an important handle leak fix) and three small cleanup patches" * tag '5.11-rc3-smb3' of git://git.samba.org/sfrench/cifs-2.6: cifs: style: replace one-element array with flexible-array cifs: connect: style: Simplify bool comparison fs: cifs: remove unneeded variable in smb3_fs_context_dup cifs: fix interrupted close commands cifs: check pointer before freeing
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linuxLinus Torvalds authored
Pull arm64 fixes from Catalin Marinas: - Set the minimum GCC version to 5.1 for arm64 due to earlier compiler bugs. - Make atomic helpers __always_inline to avoid a section mismatch when compiling with clang. - Fix the CMA and crashkernel reservations to use ZONE_DMA (remove the arm64_dma32_phys_limit variable, no longer needed with a dynamic ZONE_DMA sizing in 5.11). - Remove redundant IRQ flag tracing that was leaving lockdep inconsistent with the hardware state. - Revert perf events based hard lockup detector that was causing smp_processor_id() to be called in preemptible context. - Some trivial cleanups - spelling fix, renaming S_FRAME_SIZE to PT_REGS_SIZE, function prototypes added. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: selftests: Fix spelling of 'Mismatch' arm64: syscall: include prototype for EL0 SVC functions compiler.h: Raise minimum version of GCC to 5.1 for arm64 arm64: make atomic helpers __always_inline arm64: rename S_FRAME_SIZE to PT_REGS_SIZE Revert "arm64: Enable perf events based hard lockup detector" arm64: entry: remove redundant IRQ flag tracing arm64: Remove arm64_dma32_phys_limit and its uses
-
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linuxLinus Torvalds authored
Pull MIPS fixes from Thomas Bogendoerfer: - fix coredumps on 64bit kernels - fix for alignment bugs preventing booting - fix checking for failed irq_alloc_desc calls * tag 'mips_fixes_5.11.1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: OCTEON: fix unreachable code in octeon_irq_init_ciu MIPS: relocatable: fix possible boot hangup with KASLR enabled MIPS: Fix malformed NT_FILE and NT_SIGINFO in 32bit coredumps MIPS: boot: Fix unaligned access with CONFIG_MIPS_RAW_APPENDED_DTB
-
Al Grant authored
When 'perf inject' reads a perf.data file from an older version of perf, it writes event attributes into the output with the original size field, but lays them out as if they had the size currently used. Readers see a corrupt file. Update the size field to match the layout. Signed-off-by:
Al Grant <al.grant@foss.arm.com> Acked-by:
Jiri Olsa <jolsa@redhat.com> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lore.kernel.org/lkml/20201124195818.30603-1-al.grant@arm.comSigned-off-by:
Denis Nikitin <denik@chromium.org> Signed-off-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Adrian Hunter authored
In some cases, the number of cpus (nr_cpus_online) is confused with the maximum cpu number (nr_cpus_avail), which results in the error in the example below: Example on system with 8 cpus: Before: # echo 0 > /sys/devices/system/cpu/cpu2/online # ./perf record --kcore -e intel_pt// taskset --cpu-list 7 uname Linux [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.147 MB perf.data ] # ./perf script --itrace=e Requested CPU 7 too large. Consider raising MAX_NR_CPUS 0x25908 [0x8]: failed to process type: 68 [Invalid argument] After: # ./perf script --itrace=e # Fixes: 8c727469 ("perf machine: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Fixes: 7df4e36a ("perf session: Replace MAX_NR_CPUS with perf_env::nr_cpus_online") Signed-off-by:
Adrian Hunter <adrian.hunter@intel.com> Tested-by:
Kan Liang <kan.liang@linux.intel.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: stable@vger.kernel.org Link: http://lore.kernel.org/lkml/20210107174159.24897-1-adrian.hunter@intel.comSigned-off-by:
-
Namhyung Kim authored
As of now it doesn't consider cgroups when collecting shadow stats and metrics so counter values from different cgroups will be saved in a same slot. This resulted in incorrect numbers when those cgroups have different workloads. For example, let's look at the scenario below: cgroups A and C runs same workload which burns a cpu while cgroup B runs a light workload. $ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1 Performance counter stats for 'system wide': 3,958,116,522 cycles A 6,722,650,929 instructions A # 2.53 insn per cycle 1,132,741 cycles B 571,743 instructions B # 0.00 insn per cycle 4,007,799,935 cycles C 6,793,181,523 instructions C # 2.56 insn per cycle 1.001050869 seconds time elapsed When I run 'perf stat' with single workload, it usually shows IPC around 1.7. We can verify it (6,722,650,929.0 / 3,958,116,522 = 1.698) for cgroup A. But in this case, since cgroups are ignored, cycles are averaged so it used the lower value for IPC calculation and resulted in around 2.5. avg cycle: (3958116522 + 1132741 + 4007799935) / 3 = 2655683066 IPC (A) : 6722650929 / 2655683066 = 2.531 IPC (B) : 571743 / 2655683066 = 0.0002 IPC (C) : 6793181523 / 2655683066 = 2.557 We can simply compare cgroup pointers in the evsel and it'll be NULL when cgroups are not specified. With this patch, I can see correct numbers like below: $ perf stat -a -e cycles,instructions --for-each-cgroup A,B,C sleep 1 Performance counter stats for 'system wide': 4,171,051,687 cycles A 7,219,793,922 instructions A # 1.73 insn per cycle 1,051,189 cycles B 583,102 instructions B # 0.55 insn per cycle 4,171,124,710 cycles C 7,192,944,580 instructions C # 1.72 insn per cycle 1.007909814 seconds time elapsed Signed-off-by:Namhyung Kim <namhyung@kernel.org> Acked-by:
-
Namhyung Kim authored
To pass more info to the saved_value in the runtime_stat, add a new struct runtime_stat_data. Currently it only has 'ctx' field but later patch will add more. Note that we intentionally pass 0 as ctx to clock-related events for compatibility. It was already there in a few places. So move the code into the saved_value_lookup() explicitly and add a comment. Suggested-by:
Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Ian Rogers authored
Permissions are necessary to get a tracepoint id. Fail the test when the read fails. Signed-off-by:
Ian Rogers <irogers@google.com> Acked-by:
-
