- 16 Nov, 2022 1 commit
-
-
Maximilian Luz authored
Add device nodes to enable support for battery and charger status, the ACPI platform profile, as well as internal HID devices (including touchpad and keyboard) on the Surface Laptop 5. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221115231440.1338142-1-luzmaximilian@gmail.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>
-
- 15 Nov, 2022 8 commits
-
-
Maximilian Luz authored
Add device nodes to enable support for battery and charger status, the ACPI platform profile, as well as internal and type-cover HID devices (including sensors, touchpad, keyboard, and other miscellaneous devices) on the Surface Pro 9. This does not include support for a tablet-mode switch yet, as that is now handled via the POS subsystem (unlike the Surface Pro 8, where it is handled via the KIP subsystem) and therefore needs further changes. While we're at it, also add the missing comment for the Surface Pro 8. Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221113185951.224759-2-luzmaximilian@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Maximilian Luz authored
Currently, we check any received packet whether we have already seen it previously, regardless of the packet type (sequenced / unsequenced). We do this by checking the sequence number. This assumes that sequence numbers are valid for both sequenced and unsequenced packets. However, this assumption appears to be incorrect. On some devices, the sequence number field of unsequenced packets (in particular HID input events on the Surface Pro 9) is always zero. As a result, the current retransmission check kicks in and discards all but the first unsequenced packet, breaking (among other things) keyboard and touchpad input. Note that we have, so far, only seen packets being retransmitted in sequenced communication. In particular, this happens when there is an ACK timeout, causing the EC (or us) to re-send the packet waiting for an ACK. Arguably, retransmission / duplication of unsequenced packets should not be an issue as there is no logical condition (such as an ACK timeout) to determine when a packet should be sent again. Therefore, remove the retransmission check for unsequenced packets entirely to resolve the issue. Fixes: c167b9c7 ("platform/surface: Add Surface Aggregator subsystem") Signed-off-by: Maximilian Luz <luzmaximilian@gmail.com> Link: https://lore.kernel.org/r/20221113185951.224759-1-luzmaximilian@gmail.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Hans de Goede authored
Like the Acer Switch 10 (SW5-012) and Acer Switch 10 (S1003) models the Acer Switch V 10 (SW5-017) supports reporting SW_TABLET_MODE through acer-wmi. Add a DMI quirk for the SW5-017 setting force_caps to ACER_CAP_KBD_DOCK (these devices have no other acer-wmi based functionality). Cc: Rudolf Polzer <rpolzer@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221111111639.35730-1-hdegoede@redhat.com
-
Xiongfeng Wang authored
pci_get_device() will increase the reference count for the returned pci_dev. We need to use pci_dev_put() to decrease the reference count before asus_wmi_set_xusb2pr() returns. Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com> Link: https://lore.kernel.org/r/20221111100752.134311-1-wangxiongfeng2@huawei.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Roger Pau Monné authored
The current logic in the Intel PMC driver will forcefully attach it when detecting any CPU on the intel_pmc_core_platform_ids array, even if the matching ACPI device is not present. There's no checking in pmc_core_probe() to assert that the PMC device is present, and hence on virtualized environments the PMC device probes successfully, even if the underlying registers are not present. Before commit 21ae4357 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration") the driver would check for the presence of a specific PCI device, and that prevented the driver from attaching when running virtualized. Fix by only forcefully attaching the PMC device when not running virtualized. Note that virtualized platforms can still get the device to load if the appropriate ACPI device is present on the tables provided to the VM. Make an exception for the Xen initial domain, which does have full hardware access, and hence can attach to the PMC if present. Fixes: 21ae4357 ("platform/x86: intel_pmc_core: Substitute PCI with CPUID enumeration") Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> Acked-by: David E. Box <david.e.box@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221110163145.80374-1-roger.pau@citrix.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Lennard Gäher authored
Previously, the s2idle quirk was only active for the 21A0 machine type of the P14s Gen2a product. This also enables it for the second 21A1 type, thus reducing wake-up times from s2idle. Signed-off-by: Lennard Gäher <gaeher@mpi-sws.org> Suggested-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2181 Link: https://lore.kernel.org/r/20221108072023.17069-1-gaeher@mpi-sws.orgReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Shyam Sundar S K authored
Add new a new ACPI ID AMDI0009 used by upcoming AMD platform to the pmc supported list of devices. Cc: stable@vger.kernel.org # 6.0 Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221109083346.361603-1-Shyam-sundar.S-k@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Mario Limonciello authored
commit b37fe34c ("platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks") removed most CONFIG_DEBUG_FS checks, but there were some left that were reported to cause compile test failures. Remove the remaining checks, and also the unnecessary CONFIG_SUSPEND used in the same place. Reported-by: liyupeng@zbhlos.com Fixes: b37fe34c ("platform/x86/amd: pmc: remove CONFIG_DEBUG_FS checks") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216679 Link: https://lore.kernel.org/r/20221108023323.19304-1-mario.limonciello@amd.com Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
- 07 Nov, 2022 9 commits
-
-
Andy Shevchenko authored
We have accessing P2SB from a very few places for quite known hardware. When a new SoC appears in intel-family.h it's not obvious that it needs to be added to p2sb.c as well. Instead, provide default BDF and refactor p2sb_get_devfn() to always succeed. If in the future we would need to exclude something, we may add a list of unsupported IDs. Without this change the iTCO on Intel Comet Lake SoCs became unavailable: i801_smbus 0000:00:1f.4: failed to create iTCO device Fixes: 5c7b9167 ("i2c: i801: convert to use common P2SB accessor") Reported-and-tested-by: Jarkko Nikula <jarkko.nikula@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20221104154916.35231-1-andriy.shevchenko@linux.intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Ivan Hu authored
Add INTC1076 (JasonLake), INTC1077 (MeteorLake) and INTC1078 (RaptorLake) devices IDs. Signed-off-by: Ivan Hu <ivan.hu@canonical.com> Link: https://lore.kernel.org/r/20221102020548.5225-1-ivan.hu@canonical.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
David E. Box authored
On Sapphire Rapids, due to a hardware issue affecting the PUNIT telemetry region, reads that are not done in QWORD quantities and alignment may return incorrect data. Use a custom 64-bit copy for this region. Signed-off-by: David E. Box <david.e.box@linux.intel.com> Link: https://lore.kernel.org/r/20221105034228.1376677-1-david.e.box@linux.intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Jorge Lopez authored
After upgrading BIOS to U82 01.02.01 Rev.A, the console is flooded strange char "^@" which printed out every second and makes login nearly impossible. Also the below messages were shown both in console and journal/dmesg every second: usb 1-3: Device not responding to setup address. usb 1-3: device not accepting address 4, error -71 usb 1-3: device descriptor read/all, error -71 usb usb1-port3: unable to enumerate USB device Wifi is soft blocked by checking rfkill. When unblocked manually, after few seconds it would be soft blocked again. So I was suspecting something triggered rfkill to soft block wifi. At the end it was fixed by removing hp_wmi module. The root cause is the way hp-wmi driver handles command 1B on post-2009 BIOS. In pre-2009 BIOS, command 1Bh return 0x4 to indicate that BIOS no longer controls the power for the wireless devices. Signed-off-by: Jorge Lopez <jorge.lopez2@hp.com> Link: https://bugzilla.kernel.org/show_bug.cgi?id=216468Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221028155527.7724-1-jorge.lopez2@hp.com Cc: stable@vger.kernel.org Reviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Hans de Goede authored
Add touchscreen info for the RCA Cambio W101 v2 2-in-1. Link: https://github.com/onitake/gsl-firmware/discussions/193Signed-off-by: Hans de Goede <hdegoede@redhat.com> Link: https://lore.kernel.org/r/20221025141131.509211-1-hdegoede@redhat.com
-
Manyi Li authored
Ideapads for "Lenovo Yoga 3 Pro 1370" and "ZhaoYang K4e-IML" do not use EC to switch touchpad. Reading VPCCMD_R_TOUCHPAD will return zero thus touchpad may be blocked unexpectedly. Signed-off-by: Manyi Li <limanyi@uniontech.com> Link: https://lore.kernel.org/r/20221018095323.14591-1-limanyi@uniontech.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Hans de Goede authored
The Dell G15 5515 has the WMI interface (and WMI call returns) expected by the nvidia-wmi-ec-backlight interface. But the backlight class device registered by the nvidia-wmi-ec-backlight driver does not actually work. The amdgpu_bl0 native GPU backlight class device does actually work, add a backlight=native DMI quirk for this. Reported-by: Iris <pawel.js@protonmail.com> Reviewed-by: Daniel Dadap <ddadap@nvidia.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: - Add a comment that this needs to be revisited when dynamic-mux support gets added (suggested by: Daniel Dadap)
-
Hans de Goede authored
Testing has shown that there are quite a few laptop models which rely on native backlight control and which do not support ACPI video bus backlight control, causing __acpi_video_get_backlight_type() to return vendor. Known Windows laptop models affected by this are: Acer Aspire 1640 HP Compaq nc6120 IBM ThinkPad X40 System76 Starling Star1 and the following MacBook models are affected too: Apple MacBook 2.1 Apple MacBook 4.1 Apple MacBook Pro 7.1 the list of affected Windows laptop models is likely just the top of the iceberg. So for now lets undo the change to not register native backlight class devices when __acpi_video_get_backlight_type() != native. Since as part of the backlight-detect refactor the detection code now relies on the GPU drivers calling acpi_video_backlight_use_native() to learn that native backlight support is available we cannot just remove the acpi_video_backlight_use_native() calls from the GPU drivers. Instead modify acpi_video_backlight_use_native() to always return true for now. This is meant as a temporary work-around, which will be removed again when the heuristics from __acpi_video_get_backlight_type() have been improved so that they will return native on affected models. Reported-by: Matthew Garrett <mjg59@srcf.ucam.org> Reported-by: John Warriner <taijitu@cox.net> Reported-by: Scott Ostrander <sos12_3@hotmail.com> Reported-by: Matthias Rampke <matthias.rampke@googlemail.com> Reported-by: Milan Hodoscek <hmilan@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Hans de Goede authored
2 improvements for the Chromebook handling in acpi_video_get_backlight_type(): 1. Also check for the "GOOG000C" ACPI HID used on some models 2. Move the Chromebook check to above the ACPI-video check normally Chromebooks don't have ACPI video backlight support, but when flashed with upstream coreboot builds they may have ACPI video backlight support, but native should still be used/preferred then. Suggested-by: Mr. Chromebox <mrchromebox@gmail.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
- 24 Oct, 2022 6 commits
-
-
Dmitry Osipenko authored
Chromebooks don't have backlight in ACPI table, they suppose to use native backlight in this case. Check presence of the CrOS embedded controller ACPI device and prefer the native backlight if EC found. Suggested-by: Hans de Goede <hdegoede@redhat.com> Fixes: 2600bfa3 ("ACPI: video: Add acpi_video_backlight_use_native() helper") Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com> Reviewed-by: Hans de Goede <hdegoede@redhat.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20221024141210.67784-1-dmitry.osipenko@collabora.comSigned-off-by: Hans de Goede <hdegoede@redhat.com>
-
Gayatri Kammela authored
Add Raptor Lake client parts (both RPL and RPL_S) support to pmc core driver. Raptor Lake client parts reuse all the Alder Lake PCH IPs. Cc: Srinivas Pandruvada <srinivas.pandruvada@intel.com> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Cc: David Box <david.e.box@intel.com> Acked-by: Rajneesh Bhardwaj <irenic.rajneesh@gmail.com> Signed-off-by: Gayatri Kammela <gayatri.kammela@linux.intel.com> Link: https://lore.kernel.org/r/20220912233307.409954-2-gayatri.kammela@linux.intel.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Henning Schild authored
For apollolake the mapping between LEDs and GPIO pins was off because of a refactoring when we introduced a new device model. In addition to the reordering the indices in the lookup table need to be updated as well. Fixes: a9712626 ("leds: simatic-ipc-leds-gpio: add new model 227G") Signed-off-by: Henning Schild <henning.schild@siemens.com> Link: https://lore.kernel.org/r/20221024092027.4529-1-henning.schild@siemens.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Mario Limonciello authored
commit b0c07116 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time") adjusted the behavior for amd-pmc to avoid reading the SMU version at startup but rather on first use to improve boot time. However the SMU version is also used to decide whether to place a timer based wakeup in the OS_HINT message. If the idlemask hasn't been read before this message was sent then the SMU version will not have been cached. Ensure the SMU version has been read before deciding whether or not to run this codepath. Cc: stable@vger.kernel.org # 6.0 Reported-by: You-Sheng Yang <vicamo.yang@canonical.com> Tested-by: Anson Tsao <anson.tsao@amd.com> Fixes: b0c07116 ("platform/x86: amd-pmc: Avoid reading SMU version at probe time") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Link: https://lore.kernel.org/r/20221020113749.6621-2-mario.limonciello@amd.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Jelle van der Waa authored
thinkpad_acpi was reporting 2 fans on a ThinkPad T14s gen 1, even though the laptop has only 1 fan. The second, not present fan always reads 65535 (-1 in 16 bit signed), ignore fans which report 65535 to avoid reporting the non present fan. Signed-off-by: Jelle van der Waa <jvanderwaa@redhat.com> Link: https://lore.kernel.org/r/20221019194751.5392-1-jvanderwaa@redhat.comReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
Luke D. Jones authored
Add quirk for ASUS ROG X16 Flow 2-in-1 to enable tablet mode with lid flip (all screen rotations). Signed-off-by: Luke D. Jones <luke@ljones.dev> Link: https://lore.kernel.org/r/20221010063009.32293-1-luke@ljones.devReviewed-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com>
-
- 16 Oct, 2022 10 commits
-
-
Linus Torvalds authored
-
git://git.kernel.org/pub/scm/linux/kernel/git/crng/randomLinus Torvalds authored
Pull more random number generator updates from Jason Donenfeld: "This time with some large scale treewide cleanups. The intent of this pull is to clean up the way callers fetch random integers. The current rules for doing this right are: - If you want a secure or an insecure random u64, use get_random_u64() - If you want a secure or an insecure random u32, use get_random_u32() The old function prandom_u32() has been deprecated for a while now and is just a wrapper around get_random_u32(). Same for get_random_int(). - If you want a secure or an insecure random u16, use get_random_u16() - If you want a secure or an insecure random u8, use get_random_u8() - If you want secure or insecure random bytes, use get_random_bytes(). The old function prandom_bytes() has been deprecated for a while now and has long been a wrapper around get_random_bytes() - If you want a non-uniform random u32, u16, or u8 bounded by a certain open interval maximum, use prandom_u32_max() I say "non-uniform", because it doesn't do any rejection sampling or divisions. Hence, it stays within the prandom_*() namespace, not the get_random_*() namespace. I'm currently investigating a "uniform" function for 6.2. We'll see what comes of that. By applying these rules uniformly, we get several benefits: - By using prandom_u32_max() with an upper-bound that the compiler can prove at compile-time is ≤65536 or ≤256, internally get_random_u16() or get_random_u8() is used, which wastes fewer batched random bytes, and hence has higher throughput. - By using prandom_u32_max() instead of %, when the upper-bound is not a constant, division is still avoided, because prandom_u32_max() uses a faster multiplication-based trick instead. - By using get_random_u16() or get_random_u8() in cases where the return value is intended to indeed be a u16 or a u8, we waste fewer batched random bytes, and hence have higher throughput. This series was originally done by hand while I was on an airplane without Internet. Later, Kees and I worked on retroactively figuring out what could be done with Coccinelle and what had to be done manually, and then we split things up based on that. So while this touches a lot of files, the actual amount of code that's hand fiddled is comfortably small" * tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random: prandom: remove unused functions treewide: use get_random_bytes() when possible treewide: use get_random_u32() when possible treewide: use get_random_{u8,u16}() when possible, part 2 treewide: use get_random_{u8,u16}() when possible, part 1 treewide: use prandom_u32_max() when possible, part 2 treewide: use prandom_u32_max() when possible, part 1
-
Linus Torvalds authored
Merge tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux Pull more perf tools updates from Arnaldo Carvalho de Melo: - Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels when using bperf (perf BPF based counters) with cgroups. - Support HiSilicon PCIe Performance Monitoring Unit (PMU), that monitors bandwidth, latency, bus utilization and buffer occupancy. Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst. - User space tasks can migrate between CPUs, so when tracing selected CPUs, system-wide sideband is still needed, fix it in the setup of Intel PT on hybrid systems. - Fix metricgroups title message in 'perf list', it should state that the metrics groups are to be used with the '-M' option, not '-e'. - Sync the msr-index.h copy with the kernel sources, adding support for using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well as decoding it when printing the MSR tracepoint arguments. - Fix program header size and alignment when generating a JIT ELF in 'perf inject'. - Add multiple new Intel PT 'perf test' entries, including a jitdump one. - Fix the 'perf test' entries for 'perf stat' CSV and JSON output when running on PowerPC due to an invalid topology number in that arch. - Fix the 'perf test' for arm_coresight failures on the ARM Juno system. - Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this option to the or expression expected in the intercepted perf_event_open() syscall. - Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the 'perf annotate' asm parser. - Fix 'perf mem record -C' option processing, it was being chopped up when preparing the underlying 'perf record -e mem-events' and thus being ignored, requiring using '-- -C CPUs' as a workaround. - Improvements and tidy ups for 'perf test' shell infra. - Fix Intel PT information printing segfault in uClibc, where a NULL format was being passed to fprintf. * tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits) tools arch x86: Sync the msr-index.h copy with the kernel sources perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver perf auxtrace arm: Refactor event list iteration in auxtrace_record__init() perf tests stat+json_output: Include sanity check for topology perf tests stat+csv_output: Include sanity check for topology perf intel-pt: Fix system_wide dummy event for hybrid perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc perf test: Fix attr tests for PERF_FORMAT_LOST perf test: test_intel_pt.sh: Add 9 tests perf inject: Fix GEN_ELF_TEXT_OFFSET for jit perf test: test_intel_pt.sh: Add jitdump test perf test: test_intel_pt.sh: Tidy some alignment perf test: test_intel_pt.sh: Print a message when skipping kernel tracing perf test: test_intel_pt.sh: Tidy some perf record options perf test: test_intel_pt.sh: Fix return checking again perf: Skip and warn on unknown format 'configN' attrs perf list: Fix metricgroups title message perf mem: Fix -C option behavior for perf mem record perf annotate: Add missing condition flags for arm64 ...
-
Linus Torvalds authored
Merge tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the combination of Clang >= 14 and GAS <= 2.35. - Drop vmlinux.bz2 from the rpm package as it just annoyingly increased the package size. - Fix modpost error under build environments using musl. - Make *.ll files keep value names for easier debugging - Fix single directory build - Prevent RISC-V from selecting the broken DWARF5 support when Clang and GAS are used together. * tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5 kbuild: fix single directory build kbuild: add -fno-discard-value-names to cmd_cc_ll_c scripts/clang-tools: Convert clang-tidy args to list modpost: put modpost options before argument kbuild: Stop including vmlinux.bz2 in the rpm's Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
-
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linuxLinus Torvalds authored
Pull more clk updates from Stephen Boyd: "This is the final part of the clk patches for this merge window. The clk rate range series needed another week to fully bake. Maxime fixed the bug that broke clk notifiers and prevented this from being included in the first pull request. He also added a unit test on top to make sure it doesn't break so easily again. The majority of the series fixes up how the clk_set_rate_*() APIs work, particularly around when the rate constraints are dropped and how they move around when reparenting clks. Overall it's a much needed improvement to the clk rate range APIs that used to be pretty broken if you looked sideways. Beyond the core changes there are a few driver fixes for a compilation issue or improper data causing clks to fail to register or have the wrong parents. These are good to get in before the first -rc so that the system actually boots on the affected devices" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits) clk: tegra: Fix Tegra PWM parent clock clk: at91: fix the build with binutils 2.27 clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks clk: mediatek: clk-mux: Add .determine_rate() callback clk: tests: Add tests for notifiers clk: Update req_rate on __clk_recalc_rates() clk: tests: Add missing test case for ranges clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d clk: Introduce the clk_hw_get_rate_range function clk: Zero the clk_rate_request structure clk: Stop forwarding clk_rate_requests to the parent clk: Constify clk_has_parent() clk: Introduce clk_core_has_parent() clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock clk: Add our request boundaries in clk_core_init_rate_req clk: Introduce clk_hw_init_rate_request() clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller clk: Change clk_core_init_rate_req prototype clk: Set req_rate on reparenting clk: Take into account uncached clocks in clk_set_rate_range() ...
-
git://git.samba.org/sfrench/cifs-2.6Linus Torvalds authored
Pull more cifs updates from Steve French: - fix a regression in guest mounts to old servers - improvements to directory leasing (caching directory entries safely beyond the root directory) - symlink improvement (reducing roundtrips needed to process symlinks) - an lseek fix (to problem where some dir entries could be skipped) - improved ioctl for returning more detailed information on directory change notifications - clarify multichannel interface query warning - cleanup fix (for better aligning buffers using ALIGN and round_up) - a compounding fix - fix some uninitialized variable bugs found by Coverity and the kernel test robot * tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6: smb3: improve SMB3 change notification support cifs: lease key is uninitialized in two additional functions when smb1 cifs: lease key is uninitialized in smb1 paths smb3: must initialize two ACL struct fields to zero cifs: fix double-fault crash during ntlmssp cifs: fix static checker warning cifs: use ALIGN() and round_up() macros cifs: find and use the dentry for cached non-root directories also cifs: enable caching of directories for which a lease is held cifs: prevent copying past input buffer boundaries cifs: fix uninitialised var in smb2_compound_op() cifs: improve symlink handling for smb2+ smb3: clarify multichannel warning cifs: fix regression in very old smb1 mounts cifs: fix skipping to incorrect offset in emit_cached_dirents
-
Tetsuo Handa authored
This reverts commit 78e5a339 ("cpumask: fix checking valid cpu range"). syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at cpu_max_bits_warn() [1], for commit 78e5a339 ("cpumask: fix checking valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE() when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of "cpu" will trivially hit cpu == nr_cpumask_bits condition. Although syzbot found this problem in linux-next.git on 2022/09/27 [2], this problem was not fixed immediately. As a result, that patch was sent to linux.git before the patch author recognizes this problem, and syzbot started failing to test changes in linux.git since 2022/10/10 [3]. Andrew Jones proposed a fix for x86 and riscv architectures [4]. But [2] and [5] indicate that affected locations are not limited to arch code. More delay before we find and fix affected locations, less tested kernel (and more difficult to bisect and fix) before release. We should have inspected and fixed basically all cpumask users before applying that patch. We should not crash kernels in order to ask existing cpumask users to update their code, even if limited to CONFIG_DEBUG_PER_CPU_MAPS=y case. Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1] Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2] Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3] Link: https://lkml.kernel.org/r/20221014155845.1986223-1-ajones@ventanamicro.com [4] Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5] Reported-by: Andrew Jones <ajones@ventanamicro.com> Reported-by: syzbot+d0fd2bf0dd6da72496dd@syzkaller.appspotmail.com Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Cc: Yury Norov <yury.norov@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Nathan Chancellor authored
When building with a RISC-V kernel with DWARF5 debug info using clang and the GNU assembler, several instances of the following error appear: /tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported Dumping the .s file reveals these .uleb128 directives come from .debug_loc and .debug_ranges: .Ldebug_loc0: .byte 4 # DW_LLE_offset_pair .uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset .uleb128 .Ltmp1-.Lfunc_begin0 # ending offset .byte 1 # Loc expr size .byte 90 # DW_OP_reg10 .byte 0 # DW_LLE_end_of_list .Ldebug_ranges0: .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp6-.Lfunc_begin0 # starting offset .uleb128 .Ltmp27-.Lfunc_begin0 # ending offset .byte 4 # DW_RLE_offset_pair .uleb128 .Ltmp28-.Lfunc_begin0 # starting offset .uleb128 .Ltmp30-.Lfunc_begin0 # ending offset .byte 0 # DW_RLE_end_of_list There is an outstanding binutils issue to support a non-constant operand to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to be any movement on it, due to concerns over how it would work with linker relaxation. To avoid these build errors, prevent DWARF5 from being selected when using clang and an assembler that does not have support for these symbol deltas, which can be easily checked in Kconfig with as-instr plus the small test program from the dwz test suite from the binutils issue. Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215 Link: https://github.com/ClangBuiltLinux/linux/issues/1719Signed-off-by: Nathan Chancellor <nathan@kernel.org> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-
Masahiro Yamada authored
Commit f110e5a2 ("kbuild: refactor single builds of *.ko") was wrong. KBUILD_MODULES _is_ needed for single builds. Otherwise, "make foo/bar/baz/" does not build module objects at all. Fixes: f110e5a2 ("kbuild: refactor single builds of *.ko") Reported-by: David Sterba <dsterba@suse.cz> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Tested-by: David Sterba <dsterba@suse.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slabLinus Torvalds authored
Pull slab hotfix from Vlastimil Babka: "A single fix for the common-kmalloc series, for warnings on mips and sparc64 reported by Guenter Roeck" * tag 'slab-for-6.1-rc1-hotfix' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm/slab: use kmalloc_node() for off slab freelist_idx_t array allocation
-
- 15 Oct, 2022 6 commits
-
-
https://github.com/openrisc/linuxLinus Torvalds authored
Pull OpenRISC updates from Stafford Horne: "I have relocated to London so not much work from me while I get settled. Still, OpenRISC picked up two patches in this window: - Fix for kernel page table walking from Jann Horn - MAINTAINER entry cleanup from Palmer Dabbelt" * tag 'for-linus' of https://github.com/openrisc/linux: MAINTAINERS: git://github -> https://github.com for openrisc openrisc: Fix pagewalk usage in arch_dma_{clear, set}_uncached
-
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pciLinus Torvalds authored
Pull pci fix from Bjorn Helgaas: "Revert the attempt to distribute spare resources to unconfigured hotplug bridges at boot time. This fixed some dock hot-add scenarios, but Jonathan Cameron reported that it broke a topology with a multi-function device where one function was a Switch Upstream Port and the other was an Endpoint" * tag 'pci-v6.1-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: Distribute available resources for root buses, too"
-
Hyeonggon Yoo authored
After commit d6a71648 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator"), SLAB passes large ( > PAGE_SIZE * 2) requests to buddy like SLUB does. SLAB has been using kmalloc caches to allocate freelist_idx_t array for off slab caches. But after the commit, freelist_size can be bigger than KMALLOC_MAX_CACHE_SIZE. Instead of using pointer to kmalloc cache, use kmalloc_node() and only check if the kmalloc cache is off slab during calculate_slab_order(). If freelist_size > KMALLOC_MAX_CACHE_SIZE, no looping condition happens as it allocates freelist_idx_t array directly from buddy. Link: https://lore.kernel.org/all/20221014205818.GA1428667@roeck-us.net/Reported-and-tested-by: Guenter Roeck <linux@roeck-us.net> Fixes: d6a71648 ("mm/slab: kmalloc: pass requests larger than order-1 page to page allocator") Signed-off-by: Hyeonggon Yoo <42.hyeyoo@gmail.com> Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
-
git://githubhttps://github.comPalmer Dabbelt authored
Github deprecated the git:// links about a year ago, so let's move to the https:// URLs instead. Reported-by: Conor Dooley <conor.dooley@microchip.com> Link: https://github.blog/2021-09-01-improving-git-protocol-security-github/Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> Signed-off-by: Stafford Horne <shorne@gmail.com>
-
Steve French authored
Change notification is a commonly supported feature by most servers, but the current ioctl to request notification when a directory is changed does not return the information about what changed (even though it is returned by the server in the SMB3 change notify response), it simply returns when there is a change. This ioctl improves upon CIFS_IOC_NOTIFY by returning the notify information structure which includes the name of the file(s) that changed and why. See MS-SMB2 2.2.35 for details on the individual filter flags and the file_notify_information structure returned. To use this simply pass in the following (with enough space to fit at least one file_notify_information structure) struct __attribute__((__packed__)) smb3_notify { uint32_t completion_filter; bool watch_tree; uint32_t data_len; uint8_t data[]; } __packed; using CIFS_IOC_NOTIFY_INFO 0xc009cf0b or equivalently _IOWR(CIFS_IOCTL_MAGIC, 11, struct smb3_notify_info) The ioctl will block until the server detects a change to that directory or its subdirectories (if watch_tree is set). Acked-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Acked-by: Ronnie Sahlberg <lsahlber@redhat.com> Signed-off-by: Steve French <stfrench@microsoft.com>
-
Steve French authored
cifs_open and _cifsFileInfo_put also end up with lease_key uninitialized in smb1 mounts. It is cleaner to set lease key to zero in these places where leases are not supported (smb1 can not return lease keys so the field was uninitialized). Addresses-Coverity: 1514207 ("Uninitialized scalar variable") Addresses-Coverity: 1514331 ("Uninitialized scalar variable") Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz> Signed-off-by: Steve French <stfrench@microsoft.com>
-