After getting a backing file id with FUSE_DEV_IOC_BACKING_OPEN ioctl,
a FUSE server can reply to an OPEN request with flag FOPEN_PASSTHROUGH
and the backing file id.

The FUSE server should reuse the same backing file id for all the open
replies of the same FUSE inode and open will fail (with -EIO) if a the
server attempts to open the same inode with conflicting io modes or to
setup passthrough to two different backing files for the same FUSE inode.
Using the same backing file id for several different inodes is allowed.

Opening a new file with FOPEN_DIRECT_IO for an inode that is already
open for passthrough is allowed, but only if the FOPEN_PASSTHROUGH flag
and correct backing file id are specified as well.

The read/write IO of such files will not use passthrough operations to
the backing file, but mmap, which does not support direct_io, will use
the backing file insead of using the page cache as it always did.

Even though all FUSE passthrough files of the same inode use the same
backing file as a backing inode reference, each FUSE file opens a unique
instance of a backing_file object to store the FUSE path that was used
to open the inode and the open flags of the specific open file.

The per-file, backing_file object is released along with the FUSE file.
The inode associated fuse_backing object is released when the last FUSE
passthrough file of that inode is released AND when the backing file id
is closed by the server using the FUSE_DEV_IOC_BACKING_CLOSE ioctl.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

In preparation for opening file in passthrough mode, store the
fuse_open_out argument in ff->args to be passed into fuse_file_io_open()
with the optional backing_id member.

This will be used for setting up passthrough to backing file on open
reply with FOPEN_PASSTHROUGH flag and a valid backing_id.

Opening a file in passthrough mode may fail for several reasons, such as
missing capability, conflicting open flags or inode in caching mode.
Return EIO from fuse_file_io_open() in those cases.

The combination of FOPEN_PASSTHROUGH and FOPEN_DIRECT_IO is allowed -
it mean that read/write operations will go directly to the server,
but mmap will be done to the backing file.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

FUSE server calls the FUSE_DEV_IOC_BACKING_OPEN ioctl with a backing file
descriptor.  If the call succeeds, a backing file identifier is returned.

A later change will be using this backing file id in a reply to OPEN
request with the flag FOPEN_PASSTHROUGH to setup passthrough of file
operations on the open FUSE file to the backing file.

The FUSE server should call FUSE_DEV_IOC_BACKING_CLOSE ioctl to close the
backing file by its id.

This can be done at any time, but if an open reply with FOPEN_PASSTHROUGH
flag is still in progress, the open may fail if the backing file is
closed before the fuse file was opened.

Setting up backing files requires a server with CAP_SYS_ADMIN privileges.
For the backing file to be successfully setup, the backing file must
implement both read_iter and write_iter file operations.

The limitation on the level of filesystem stacking allowed for the
backing file is enforced before setting up the backing file.
Signed-off-by: Alessio Balsini <balsini@android.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

FUSE_PASSTHROUGH capability to passthrough FUSE operations to backing
files will be made available with kernel config CONFIG_FUSE_PASSTHROUGH.

When requesting FUSE_PASSTHROUGH, userspace needs to specify the
max_stack_depth that is allowed for FUSE on top of backing files.

Introduce the flag FOPEN_PASSTHROUGH and backing_id to fuse_open_out
argument that can be used when replying to OPEN request, to setup
passthrough of io operations on the fuse inode to a backing file.

Introduce a refcounted fuse_backing object that will be used to
associate an open backing file with a fuse inode.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

In preparation to adding more fuse dev ioctls.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Instead of denying caching mode on parallel dio open, deny caching
open only while parallel dio are in-progress and wait for in-progress
parallel dio writes before entering inode caching io mode.

This allows executing parallel dio when inode is not in caching mode
even if shared mmap is allowed, but no mmaps have been performed on
the inode in question.

An mmap on direct_io file now waits for all in-progress parallel dio
writes to complete, so parallel dio writes together with
FUSE_DIRECT_IO_ALLOW_MMAP is enabled by this commit.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The fuse inode io mode is determined by the mode of its open files/mmaps
and parallel dio opens and expressed in the value of fi->iocachectr:

 > 0 - caching io: files open in caching mode or mmap on direct_io file
 < 0 - parallel dio: direct io mode with parallel dio writes enabled
== 0 - direct io: no files open in caching mode and no files mmaped

Note that iocachectr value of 0 might become positive or negative,
while non-parallel dio is getting processed.

direct_io mmap uses page cache, so first mmap will mark the file as
ff->io_opened and increment fi->iocachectr to enter the caching io mode.

If the server opens the file in caching mode while it is already open
for parallel dio or vice versa the open fails.

This allows executing parallel dio when inode is not in caching mode
and no mmaps have been performed on the inode in question.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

In preparation for inode io modes, a server open response could fail due to
conflicting inode io modes.

Allow returning an error from fuse_finish_open() and handle the error in
the callers.

fuse_finish_open() is used as the callback of finish_open(), so that
FMODE_OPENED will not be set if fuse_finish_open() fails.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fuse_open_common() has a lot of code relevant only for regular files and
O_TRUNC in particular.

Copy the little bit of remaining code into fuse_dir_open() and stop using
this common helper for directory open.

Also split out fuse_dir_finish_open() from fuse_finish_open() before we add
inode io modes to fuse_finish_open().
Suggested-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

This removed the need to pass isdir argument to fuse_put_file().
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

fuse_finish_open() is called from fuse_open_common() and from
fuse_create_open().  In the latter case, the O_TRUNC flag is always
cleared in finish_open()m before calling into fuse_finish_open().

Move the bits that update attribute cache post O_TRUNC open into a
helper and call this helper from fuse_open_common() directly.
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

So far this is just a helper to remove complex locking logic out of
fuse_direct_write_iter.  Especially needed by the next patch in the series
to that adds the fuse inode cache IO mode and adds in even more locking
complexity.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

This makes the code a bit easier to read and allows to more easily add more
conditions when an exclusive lock is needed.
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

There were multiple issues with direct_io_allow_mmap:

 - fuse_link_write_file() was missing, resulting in warnings in
   fuse_write_file_get() and EIO from msync()

 - "vma->vm_ops = &fuse_file_vm_ops" was not set, but especially
   fuse_page_mkwrite is needed.

The semantics of invalidate_inode_pages2() is so far not clearly defined in
fuse_file_mmap.  It dates back to commit 3121bfe7 ("fuse: fix
"direct_io" private mmap") Though, as direct_io_allow_mmap is a new
feature, that was for MAP_PRIVATE only.  As invalidate_inode_pages2() is
calling into fuse_launder_folio() and writes out dirty pages, it should be
safe to call invalidate_inode_pages2 for MAP_PRIVATE and MAP_SHARED as
well.

Cc: Hao Xu <howeyxu@tencent.com>
Cc: stable@vger.kernel.org
Fixes: e78662e8 ("fuse: add a new fuse init flag to relax restrictions in no cache mode")
Signed-off-by: Bernd Schubert <bschubert@ddn.com>
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Alyssa Ross <hi@alyssa.is> requested that virtiofs notifies userspace
when filesytems become available. This can be used to detect when a
filesystem with a given tag is hotplugged, for example. uevents allow
userspace to detect changes without resorting to polling.

The tag is included as a uevent property so it's easy for userspace to
identify the filesystem in question even when the sysfs directory goes
away during removal.

Here are example uevents:

  # udevadm monitor -k -p

  KERNEL[111.113221] add      /fs/virtiofs/2 (virtiofs)
  ACTION=add
  DEVPATH=/fs/virtiofs/2
  SUBSYSTEM=virtiofs
  TAG=test

  KERNEL[165.527167] remove   /fs/virtiofs/2 (virtiofs)
  ACTION=remove
  DEVPATH=/fs/virtiofs/2
  SUBSYSTEM=virtiofs
  TAG=test
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

The virtiofs filesystem is mounted using a "tag" which is exported by
the virtiofs device:

  # mount -t virtiofs <tag> /mnt

The virtiofs driver knows about all the available tags but these are
currently not exported to user space.

People have asked for these tags to be exported to user space. Most
recently Lennart Poettering has asked for it as he wants to scan the
tags and mount virtiofs automatically in certain cases.

https://gitlab.com/virtio-fs/virtiofsd/-/issues/128

This patch exports tags at /sys/fs/virtiofs/<N>/tag where N is the id of
the virtiofs device. The filesystem tag can be obtained by reading this
"tag" file.

There is also a symlink at /sys/fs/virtiofs/<N>/device that points to
the virtiofs device that exports this tag.

This patch converts the existing struct virtio_fs into a full kobject.
It already had a refcount so it's an easy change. The virtio_fs objects
can then be exposed in a kset at /sys/fs/virtiofs/. Note that virtio_fs
objects may live slightly longer than we wish for them to be exposed to
userspace, so kobject_del() is called explicitly when the underlying
virtio_device is removed. The virtio_fs object is freed when all
references are dropped (e.g. active mounts) but disappears as soon as
the virtiofs device is gone.
Originally-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Newlines in virtiofs tags are awkward for users and potential vectors
for string injection attacks.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>

Merge tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Reformat nested if-conditionals in Makefiles with 4 spaces

 - Fix CONFIG_DEBUG_INFO_BTF builds for big endian

 - Fix modpost for module srcversion

 - Fix an escape sequence warning in gen_compile_commands.py

 - Fix kallsyms to ignore ARMv4 thunk symbols

* tag 'kbuild-fixes-v6.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  kallsyms: ignore ARMv4 thunks along with others
  modpost: trim leading spaces when processing source files list
  gen_compile_commands: fix invalid escape sequence warning
  kbuild: Fix changing ELF file type for output of gen_btf for big endian
  docs: kconfig: Fix grammar and formatting
  kbuild: use 4-space indentation when followed by conditionals

Pull x86 fix from Borislav Petkov:

 - Use a GB page for identity mapping only when memory of this size is
   requested so that mapping of reserved regions is prevented which
   would otherwise lead to system crashes on UV machines

* tag 'x86_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mm/ident_map: Use gbpages only where full GB page should be mapped.

Pull irq fixes from Borislav Petkov:

 - Fix GICv4.1 affinity update

 - Restore a quirk for ACPI-based GICv4 systems

 - Handle non-coherent GICv4 redistributors properly

 - Prevent spurious interrupts on Broadcom devices using GIC v3
   architecture

 - Other minor fixes

* tag 'irq_urgent_for_v6.8_rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  irqchip/gic-v3-its: Fix GICv4.1 VPE affinity update
  irqchip/gic-v3-its: Restore quirk probing for ACPI-based systems
  irqchip/gic-v3-its: Handle non-coherent GICv4 redistributors
  irqchip/qcom-mpm: Fix IS_ERR() vs NULL check in qcom_mpm_init()
  irqchip/loongson-eiointc: Use correct struct type in eiointc_domain_alloc()
  irqchip/irq-brcmstb-l2: Add write memory barrier before exit

Pull i2c fixes from Wolfram Sang:
 "Two fixes for i801 and qcom-geni devices. Meanwhile, a fix from Arnd
  addresses a compilation error encountered during compile test on
  powerpc"

* tag 'i2c-for-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: i801: Fix block process call transactions
  i2c: pasemi: split driver into two separate modules
  i2c: qcom-geni: Correct I2C TRE sequence

Pull powerpc fixes from Michael Ellerman:
 "This is a bit of a big batch for rc4, but just due to holiday hangover
  and because I didn't send any fixes last week due to a late revert
  request. I think next week should be back to normal.

   - Fix ftrace bug on boot caused by exit text sections with
     '-fpatchable-function-entry'

   - Fix accuracy of stolen time on pseries since the switch to
     VIRT_CPU_ACCOUNTING_GEN

   - Fix a crash in the IOMMU code when doing DLPAR remove

   - Set pt_regs->link on scv entry to fix BPF stack unwinding

   - Add missing PPC_FEATURE_BOOKE on 64-bit e5500/e6500, which broke
     gdb

   - Fix boot on some 6xx platforms with STRICT_KERNEL_RWX enabled

   - Fix build failures with KASAN enabled and 32KB stack size

   - Some other minor fixes

  Thanks to Arnd Bergmann, Benjamin Gray, Christophe Leroy, David
  Engraf, Gaurav Batra, Jason Gunthorpe, Jiangfeng Xiao, Matthias
  Schiffer, Nathan Lynch, Naveen N Rao, Nicholas Piggin, Nysal Jan K.A,
  R Nageswara Sastry, Shivaprasad G Bhat, Shrikanth Hegde, Spoorthy,
  Srikar Dronamraju, and Venkat Rao Bagalkote"

* tag 'powerpc-6.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/iommu: Fix the missing iommu_group_put() during platform domain attach
  powerpc/pseries: fix accuracy of stolen time
  powerpc/ftrace: Ignore ftrace locations in exit text sections
  powerpc/cputable: Add missing PPC_FEATURE_BOOKE on PPC64 Book-E
  powerpc/kasan: Limit KASAN thread size increase to 32KB
  Revert "powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add"
  powerpc: 85xx: mark local functions static
  powerpc: udbg_memcons: mark functions static
  powerpc/kasan: Fix addr error caused by page alignment
  powerpc/6xx: set High BAT Enable flag on G2_LE cores
  selftests/powerpc/papr_vpd: Check devfd before get_system_loc_code()
  powerpc/64: Set task pt_regs->link to the LR value on scv entry
  powerpc/pseries/iommu: Fix iommu initialisation during DLPAR add
  powerpc/pseries/papr-sysparm: use u8 arrays for payloads

Pull bcachefs fixes from Kent Overstreet:
 "Mostly pretty trivial, the user visible ones are:

   - don't barf when replicas_required > replicas

   - fix check_version_upgrade() so it doesn't do something nonsensical
     when we're downgrading"

* tag 'bcachefs-2024-02-17' of https://evilpiepirate.org/git/bcachefs:
  bcachefs: Fix missing va_end()
  bcachefs: Fix check_version_upgrade()
  bcachefs: Clamp replicas_required to replicas
  bcachefs: fix missing endiannes conversion in sb_members
  bcachefs: fix kmemleak in __bch2_read_super error handling path
  bcachefs: Fix missing bch2_err_class() calls

Pull driver core fixes from Greg KH:
 "Here are some driver core fixes, a kobject fix, and a documentation
  update for 6.8-rc5. In detail these changes are:

   - devlink fixes for reported issues with 6.8-rc1

   - topology scheduling regression fix that has been reported by many

   - kobject loosening of checks change in -rc1 is now reverted as some
     codepaths seemed to need the checks

   - documentation update for the CVE process. Has been reviewed by
     many, the last minute change to the document was to bring the .rst
     format back into the the new style rules, the contents did not
     change.

  All of these, except for the documentation update, have been in
  linux-next for over a week. The documentation update has been reviewed
  for weeks by a group of developers, and in public for a week and the
  wording has stabilized for now. If future changes are needed, we can
  do so before 6.8-final is out (or anytime after that)"

* tag 'driver-core-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
  Documentation: Document the Linux Kernel CVE process
  Revert "kobject: Remove redundant checks for whether ktype is NULL"
  driver core: fw_devlink: Improve logs for cycle detection
  driver core: fw_devlink: Improve detection of overlapping cycles
  driver core: Fix device_link_flag_is_sync_state_only()
  topology: Set capacity_freq_ref in all cases

Pull char / miscdriver fixes from Greg KH:
 "Here is a small set of char/misc and IIO driver fixes for 6.8-rc5.

  Included in here are:

   - lots of iio driver fixes for reported issues

   - nvmem device naming fixup for reported problem

   - interconnect driver fixes for reported issues

  All of these have been in linux-next for a while with no reported the
  issues (the nvmem patch was included in a different branch in
  linux-next before sent to me for inclusion here)"

* tag 'char-misc-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
  nvmem: include bit index in cell sysfs file name
  iio: adc: ad4130: only set GPIO_CTRL if pin is unused
  iio: adc: ad4130: zero-initialize clock init data
  interconnect: qcom: x1e80100: Add missing ACV enable_mask
  interconnect: qcom: sm8650: Use correct ACV enable_mask
  iio: accel: bma400: Fix a compilation problem
  iio: commom: st_sensors: ensure proper DMA alignment
  iio: hid-sensor-als: Return 0 for HID_USAGE_SENSOR_TIME_TIMESTAMP
  iio: move LIGHT_UVA and LIGHT_UVB to the end of iio_modifier
  staging: iio: ad5933: fix type mismatch regression
  iio: humidity: hdc3020: fix temperature offset
  iio: adc: ad7091r8: Fix error code in ad7091r8_gpio_setup()
  iio: adc: ad_sigma_delta: ensure proper DMA alignment
  iio: imu: adis: ensure proper DMA alignment
  iio: humidity: hdc3020: Add Makefile, Kconfig and MAINTAINERS entry
  iio: imu: bno055: serdev requires REGMAP
  iio: magnetometer: rm3100: add boundary check for the value read from RM3100_REG_TMRC
  iio: pressure: bmp280: Add missing bmp085 to SPI id table
  iio: core: fix memleak in iio_device_register_sysfs
  interconnect: qcom: sm8550: Enable sync_state
  ...

Pull tty / serial fixes from Greg KH:
 "Here are three small tty and serial driver fixes for 6.8-rc5:

   - revert a 8250_pci1xxxx off-by-one change that was incorrect

   - two changes to fix the transmit path of the mxs-auart driver,
     fixing a regression in the 6.2 release

  All of these have been in linux-next for over a week with no reported
  issues"

* tag 'tty-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  serial: mxs-auart: fix tx
  serial: core: introduce uart_port_tx_flags()
  serial: 8250_pci1xxxx: partially revert off by one patch

Pull USB / Thunderbolt fixes from Greg KH:
 "Here are two small fixes for 6.8-rc5:

   - thunderbolt to fix a reported issue on many platforms

   - dwc3 driver revert of a commit that caused problems in -rc1

  Both of these changes have been in linux-next for over a week with no
  reported issues"

* tag 'usb-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "usb: dwc3: Support EBC feature of DWC_usb31"
  thunderbolt: Fix setting the CNS bit in ROUTER_CS_5

Pull media fixes from Mauro Carvalho Chehab:

 - regression fix for rkisp1 shared IRQ logic

 - fix atomisp breakage due to a kAPI change

 - permission fix for remote controller BPF support

 - memleak fix in ir_toy driver

 - Kconfig dependency fix for pwm-ir-rx

* tag 'media/v6.8-4' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  media: pwm-ir-tx: Depend on CONFIG_HIGH_RES_TIMERS
  media: ir_toy: fix a memleak in irtoy_tx
  media: rc: bpf attach/detach requires write permission
  media: atomisp: Adjust for v4l2_subdev_state handling changes in 6.8
  media: rkisp1: Fix IRQ handling due to shared interrupts
  media: Revert "media: rkisp1: Drop IRQF_SHARED"

Pull pci fixes from Bjorn Helgaas:

 - Keep bridges in D0 if we need to poll downstream devices for PME to
   resolve a v6.6 regression where we failed to enumerate devices below
   bridges put in D3hot by runtime PM, e.g., NVMe drives connected via
   Thunderbolt or USB4 docks (Alex Williamson)

 - Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer

* tag 'pci-v6.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
  MAINTAINERS: Add Siddharth Vadapalli as PCI TI DRA7XX/J721E reviewer
  PCI: Fix active state requirement in PME polling

Merge tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull probes fix from Masami Hiramatsu:

 - tracing/probes: Fix BTF structure member finder to find the members
   which are placed after any anonymous union member correctly.

* tag 'probes-fixes-v6.8-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  tracing/probes: Fix to search structure fields correctly

Pull smb client fixes from Steve French:
 "Five smb3 client fixes, most also for stable:

   - Two multichannel fixes (one to fix potential handle leak on retry)

   - Work around possible serious data corruption (due to change in
     folios in 6.3, for cases when non standard maximum write size
     negotiated)

   - Symlink creation fix

   - Multiuser automount fix"

* tag '6.8-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
  smb: Fix regression in writes when non-standard maximum write size negotiated
  smb: client: handle path separator of created SMB symlinks
  smb: client: set correct id, uid and cruid for multiuser automounts
  cifs: update the same create_guid on replay
  cifs: fix underflow in parse_server_interfaces()

The Linux kernel project now has the ability to assign CVEs to fixed
issues, so document the process and how individual developers can get a
CVE if one is not automatically assigned for their fixes.
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Konstantin Ryabitsev <konstantin@linuxfoundation.org>
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/2024021731-essence-sadness-28fd@gregkhSigned-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix to search a field from the structure which has anonymous union
correctly.
Since the reference `type` pointer was updated in the loop, the search
loop suddenly aborted where it hits an anonymous union. Thus it can not
find the field after the anonymous union. This avoids updating the
cursor `type` pointer in the loop.

Link: https://lore.kernel.org/all/170791694361.389532.10047514554799419688.stgit@devnote2/

Fixes: 302db0f5 ("tracing/probes: Add a function to search a member of a struct/union")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>

Merge tag 'i2c-host-fixes-6.8-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/andi.shyti/linux into i2c/for-current

Three fixes are included here. Two are strictly hardware-related
for the i801 and qcom-geni devices. Meanwhile, a fix from Arnd
addresses a compilation error encountered during compile test on
powerpc.

Since I have been contributing to the driver for a while and wish to help
with the review process, add myself as a reviewer.

Link: https://lore.kernel.org/r/20240216065926.473805-1-s-vadapalli@ti.comSigned-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>

Pull SCSI fixes from James Bottomley:
 "Three fixes: the two fnic ones are a revert and a refix, which is why
  the diffstat is a bit big. The target one also extracts a function to
  add a check for configuration and so looks bigger than it is"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: fnic: Move fnic_fnic_flush_tx() to a work queue
  scsi: Revert "scsi: fcoe: Fix potential deadlock on &fip->ctlr_lock"
  scsi: target: Fix unmap setup during configuration

Pull workqueue fix from Tejun Heo:
 "Just one patch to revert commit ca10d851 ("workqueue: Override
  implicit ordered attribute in workqueue_apply_unbound_cpumask()").

  This commit could break ordering guarantees for ordered workqueues.
  The problem that the commit tried to resolve partially - making
  ordered workqueues follow unbound cpumask - is fully solved in
  wq/for-6.9 branch"

* tag 'wq-for-6.8-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  Revert "workqueue: Override implicit ordered attribute in workqueue_apply_unbound_cpumask()"

Pull block fixes from Jens Axboe:
 "Just an nvme pull request via Keith:

   - Fabrics connection error handling (Chaitanya)

   - Use relaxed effects to reduce unnecessary queue freezes (Keith)"

* tag 'block-6.8-2024-02-16' of git://git.kernel.dk/linux:
  nvmet: remove superfluous initialization
  nvme: implement support for relaxed effects
  nvme-fabrics: fix I/O connect error handling

Pull io_uring fix from Jens Axboe:
 "Just a single fix for a regression in how overflow is handled for
  multishot accept requests"

* tag 'io_uring-6.8-2024-02-16' of git://git.kernel.dk/linux:
  io_uring/net: fix multishot accept overflow handling