We forgot to add the ADMA error bit to the list of data interrupts.
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

The TI controller on Toshiba Tecra M5 needs more time to power up or
the cards will init incorrectly or not at all.
Signed-off-by: José M. Fernández <josemariafg@gmail.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

The goto unmap is too early, we haven't allocated host or done the
request_region().

Found by smatch (http://repo.or.cz/w/smatch.git).

[ Second error path fix by Pierre Ossman ]
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

The block layer does not support very low sector count restrictions
so we need to be prepared to handle bigger requests than we can send
directly to the controller.

Problem found by Manuel Lauss.
Signed-off-by: Pierre Ossman <pierre@ossman.eu>

Commit c7510859 ("PM/Hibernate: Wait for
SCSI devices scan to complete during resume") added a call to
scsi_complete_async_scans() to software_resume(), so that it waited for
the SCSI scanning to complete, but the call was added at a wrong place.

Namely, it should have been added after wait_for_device_probe(), which
is called only if the image partition hasn't been specified yet.  Also,
it's reasonable to check if the image partition is present and only wait
for the device probing and SCSI scanning to complete if it is not the
case.

Additionally, since noresume is checked right at the beginning of
software_resume() and the function returns immediately if it's set, it
doesn't make sense to check it once again later.
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

RomFS should advance the destination buffer pointer when reading data from a
blockdev source (the data may be split over multiple blocks, each requiring its
own sb_read() call).  Without this, all the data is copied to the beginning of
the output buffer.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

romfs_lookup() should be using a routine akin to strcmp() on the backing store,
rather than one akin to strncmp().  If it uses the latter, it's liable to match
/bin/shutdown when looking up /bin/sh.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently, although find_last_bit is EXPORTed, it is statically linked
with the kernel and is referenced only under CONFIG_SMP.

When CONFIG_SMP is undefined and find_last_bit is referenced only by
modules, linking fails with:

  ERROR: "find_last_bit" [fs/nfs/nfs.ko] undefined!

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Fred Isaman <iisaman@citi.umich.edu>
Signed-off-by: Benny Halevy <bhalevy@panasas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Adjust the CacheFiles documentation to use the correct names of the credential
pointers in task_struct.

The documentation was using names from the old versions of the credentials
patches.
Signed-off-by: Marc Dionne <marc.c.dionne@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

The virtio-rng drivers checks for spurious callbacks. Since
callbacks can be implemented via shared interrupts (e.g. PCI) this
could lead to guest kernel oopses with lots of virtio devices.
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'fixes-for-linus' of git://git.monstr.eu/linux-2.6-microblaze:
  microblaze: add parameter to microblaze_read()
  microblaze: Use CFLAGS_KERNEL instead of CFLAGS
  microblaze: Add STATE_SAVE_ARG_SPACE for noMMU kernel too
  microblaze: Do not check use_dcache
  microblaze: Do not use PVR configuration for broken MB version
  microblaze: Fix USR1/2 pvr printing message
  microblaze: iowrite upon timeout
  microblaze: Correspond CONFIG...PCMP in Makefile/Kconfig
  microblaze: Remove redundant variable
  microblaze: Move start_thread to process.c
  microblaze: Add missing preadv and pwritev syscalls
  microblaze: Add missing declaration for die and _exception func
  microblaze: Remove sparse error in traps.c
  microblaze: Move task_pt_regs up
  microblaze: Rename kernel_mode to pt_mode in pt_regs
  microblaze: Remove uncache shadow condition
  microblaze: Remove while(1) loop from show_regs function
  microblaze: Remove unneded per cpu SYSCALL_SAVE variable

* 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (34 commits)
  ACPI, i915: Register ACPI video even when not modesetting
  Revert "ACPICA: delete check for AML access to port 0x81-83"
  I/O port protection: update for windows compatibility.
  sony-laptop: always try to unblock rfkill on load
  sony-laptop: fix bogus error message display on resume
  ACPI: EC: Fix ACPI EC resume non-query interrupt message
  sony-laptop: SNC input event 38 fix
  sony-laptop: SNC 127 Initialization Fix
  sony-laptop: Duplicate SNC 127 Event Fix
  ACPI: prevent processor.max_cstate=0 boot crash
  ACPI/hpet: prevent boot hang when hpet=force used on ICH-4M
  ACPI: delete obsolete "bus master activity" proc field
  ACPI: idle: mark_tsc_unstable() at init-time, not run-time
  ACPI: add /sys/firmware/acpi/interrupts/sci_not counter
  ACPI video: fix an error when the brightness levels on AC and on Battery are same
  acpi-cpufreq: Do not let get_measured perf depend on internal variable
  acpi-cpufreq: style-only: add parens to math expression
  acpi-cpufreq: Cleanup: Use printk_once
  x86, acpi_cpufreq: Fix the NULL pointer dereference in get_measured_perf
  thinkpad-acpi: bump up version to 0.23
  ...

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68knommu: update the default config for the ColdFire 5407C3 board
  m68knommu: update the default config for the ColdFire 5307C3 board
  m68knommu: update the default config for the ColdFire 5257EVB board
  m68knommu: update the default config for the ColdFire 5249EVB.
  m68knommu: add a defconfig for the ColdFire M5272C3 board
  m68knommu: update the defconfig for the ColdFire 5208evb board
  m68knommu: fix DMA support for ColdFire
  m68knommu: remove unused kernel stats offsets
  m68knommu: fix missing .data.cacheline_aligned section
  m68knommu: Fixed GPIO pin initialization for CONFIG_M5271 FEC.

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
  ext4: Fix potential inode allocation soft lockup in Orlov allocator
  ext4: Make the extent validity check more paranoid
  jbd: use SWRITE_SYNC_PLUG when writing synchronous revoke records
  jbd2: use SWRITE_SYNC_PLUG when writing synchronous revoke records
  ext4: really print the find_group_flex fallback warning only once

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] 5460/1: Orion: reduce namespace pollution
  [ARM] 5458/1: pcmcia: pxa2xx-sharpsl: check if we do have Scoop config
  [ARM] 5457/1: mach-imx gpio buildfix
  [ARM] 5456/1: add sys_preadv and sys_pwritev
  [ARM] pxa/pcm990: start external GPIOs immediately after built-in ones
  [ARM] pxa/palm27x: General fix for Palm27x aSoC driver
  [ARM] pxa/mioa701: use GPIO95 as AC97 reset line
  [ARM] pxa: merge AC97 platform data structures
  [ARM] pxa/magician: remove un-necessary #include of pxa-regs.h and hardware.h

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  USB: pwc : do not pass stack allocated buffers to USB core.
  USB: otg: Fix bug on remove path without transceiver
  USB: correct error handling in cdc-wdm
  USB: removal of tty->low_latency hack dating back to the old serial code
  USB: serial: sierra driver bug fix for composite interface
  USB: gadget: omap_udc uses platform_driver_probe()
  USB: ci13xxx_udc: fix build error
  USB: musb: Prevent multiple includes of musb.h
  USB: pass mem_flags to dma_alloc_coherent
  USB: g_file_storage: fix use-after-free bug when closing files
  USB: ehci-sched.c: EHCI SITD scheduling bugfix
  USB: fix mos7840 problem with minor numbers
  USB: mos7840: add new device id
  USB: musb: fix build when !CONFIG_PM
  USB: musb: Remove my email address from few musb related drivers
  USB: Gadget: MIPS CI13xxx UDC bugfixes
  USB: Unusual Device support for Gold MP3 Player Energy
  USB: serial: fix lifetime and locking problems

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Larger buffer for encrypted symlink targets
  eCryptfs: Lock lower directory inode mutex during lookup
  eCryptfs: Remove ecryptfs_unlink_sigs warnings
  eCryptfs: Fix data corruption when using ecryptfs_passthrough
  eCryptfs: Print FNEK sig properly in /proc/mounts
  eCryptfs: NULL pointer dereference in ecryptfs_send_miscdev()
  eCryptfs: Copy lower inode attrs before dentry instantiation

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
  m68k: Update defconfigs for 2.6.30-rc3
  m68k,m68knommu: Wire up preadv and pwritev
  scsi: a4000 - Correct driver unregistration in case of failure

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] update default configuration.
  [S390] omit frame pointers on s390 when possible
  [S390] Use tape_generic_offline directly.
  [S390] /proc/stat idle field for idle cpus
  [S390] appldata: avoid deadlock with appldata_mem
  [S390] ipl: fix compile breakage

* git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes:
  GFS2: Ensure that the inode goal block settings are updated
  GFS2: Fix bug in block allocation
  bitops: Add __ffs64 bitop

* 'kvm-updates/2.6.30' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: Unregister cpufreq notifier on unload
  KVM: x86: release time_page on vcpu destruction
  KVM: Fix overlapping check for memory slots
  KVM: MMU: disable global page optimization
  KVM: ia64: fix locking order entering guest
  KVM: MMU: Fix off-by-one calculating large page count

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bart/ide-2.6:
  MAINTAINERS: update IDE entry
  palm_bk3710: palm_bk3710_udmatimings[] CodingStyle fixup
  palm_bk3710: those registers/bitfields don't exist
  mediabay: fix build for CONFIG_BLOCK=n
  ide: Stop disks on reboot for laptop which cuts power
  ide-cd: fix kernel crash on hppa regression
  palm_bk3710: UDMA performance fix

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add quirk for Packard Bell RS65
  [ALSA] intel8x0: another attempt to fix ac97_clock measure routine
  [ALSA] ac97_codec: increase timeout for analog subsections
  ALSA: hda - Add quirks for Realtek codecs
  ALSA: hda - Fix alc662_init_verbs
  ALSA: keywest: Convert to new-style i2c driver
  ALSA: AOA: Convert onyx and tas codecs to new-style i2c drivers
  ALSA: Atiixp: Add SSID for mute_led quirk (unknown HP model)
  ALSA: us122l: add snd_us122l_free()
  ASoC: Fix warning in wm9705
  ASoC: OMAP: Update contact addresses
  ASoC: pxa-ssp: Don't use SSCR0_SerClkDiv and SSCR0_SCR
  ALSA: us122l: Fix signedness in comparisions

The release path for a disconnected device frees the object then unlocks
the mutex in the freed object...

Found by Dan Carpenter using Smatch
Signed-off-by: Alan Cox <alan@lxorguk.ukuu.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove my name and emailaddress from note in the source. Wincor Nixdorf
only has some ITE-chips on their mainboards, other chips are not
available for me for testing.
Signed-off-by: Niels de Vos <niels.devos@wincor-nixdorf.com>
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Wrong types on IRQ handler
Signed-off-by: Alan Cox <alan@linux.intel.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  cfq-iosched: cache prio_tree root in cfqq->p_root
  cfq-iosched: fix bug with aliased request and cooperation detection
  cfq-iosched: clear ->prio_trees[] on cfqd alloc
  block: fix intermittent dm timeout based oops
  umem: fix request_queue lock warning
  block: simplify I/O stat accounting
  pktcdvd.h should include mempool.h
  cfq-iosched: use the default seek distance when there aren't enough seek samples
  cfq-iosched: make seek_mean converge more quickly
  block: make blk_abort_queue() ignore non-request based devices
  block: include empty disks in /proc/diskstats
  bio: use bio_kmalloc() in copy/map functions
  bio: fix bio_kmalloc()
  block: fix queue bounce limit setting
  block: fix SG_IO vector request data length handling
  scatterlist: make sure sg_miter_next() doesn't return 0 sized mappings

Update the defconfig for the ASB2303 evaluation board.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Slow-work appears to delete its timer as soon as the first user
unregisters, even though other users could be active.  At the same time, it
never seems to delete slow_work_oom_timer.  Arrange for both to happen in
the shutdown path.
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (94 commits)
  netfilter: ctnetlink: fix gcc warning during compilation
  net/netrom: Fix socket locking
  netlabel: Always remove the correct address selector
  ucc_geth.c: Fix upsmr setting in RMII mode
  8139too: fix HW initial flow
  af_iucv: Fix race when queuing incoming iucv messages
  af_iucv: Test additional sk states in iucv_sock_shutdown
  af_iucv: Reject incoming msgs if RECV_SHUTDOWN is set
  af_iucv: fix oops in iucv_sock_recvmsg() for MSG_PEEK flag
  af_iucv: consider state IUCV_CLOSING when closing a socket
  iwlwifi: DMA fixes
  iwlwifi: add debugging for TX path
  mwl8: fix build warning.
  mac80211: fix alignment calculation bug
  mac80211: do not print WARN if config interface
  iwl3945: use cancel_delayed_work_sync to cancel rfkill_poll
  iwlwifi: fix EEPROM validation mask to include OTP only devices
  atmel: fix netdev ops conversion
  pcnet_cs: add cis(firmware) of the Allied Telesis LA-PCM
  mlx4_en: Fix cleanup if workqueue create in mlx4_en_add() fails
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6:
  sparc: Fix bus type probing for ESP and LE devices.
  sparc32: Update defconfig.
  sparc64: Update defconfig.

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  powerpc: Fix modular build of ide-pmac when mediabay is built in
  powerpc/pasemi: Fix build error on UP
  powerpc: Make macintosh/mediabay driver depend on CONFIG_BLOCK
  maintainers: Fix PS3 patterns
  powerpc/ps3: Fix CONFIG_PS3_FLASH=n build warning
  powerpc/32: Don't clobber personality flags on exec
  powerpc: Fix crash on CPU hotplug
  powerpc/85xx: Remove defconfigs that mpc85xx_{smp_}defconfig cover
  powerpc/85xx: Added SMP defconfig
  powerpc/85xx: Enabled a bunch of FSL specific drivers/options
  powerpc/85xx: Updated generic mpc85xx_defconfig
  powerpc: don't disable SATA interrupts on Freescale MPC8610 HPCD
  fsl_rio: Pass the proper device to dma mapping routines
  powerpc: Fix of_node_put() exit path in of_irq_map_one()
  powerpc/5200: defconfig updates
  powerpc/5200: Add FLASH nodes to lite5200 device tree
  powerpc/device-tree: Document MTD nodes with multiple "reg" tuples
  powerpc/of-device-tree: Factor MTD physmap bindings out of booting-without-of
  powerpc/5200: Bring the legacy fsl_spi_platform_data hooks back

write_lock(&current->fs->lock) guarantees we can't wrongly miss
LSM_UNSAFE_SHARE, this is what we care about. Use rcu_read_lock()
instead of ->siglock to iterate over the sub-threads. We must see
all CLONE_THREAD|CLONE_FS threads which didn't pass exit_fs(), it
takes fs->lock too.

With or without this patch we can miss the freshly cloned thread
and set LSM_UNSAFE_SHARE, we don't care.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
[ Fixed lock/unlock typo  - Hugh ]
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

If do_execve() fails after check_unsafe_exec(), it clears fs->in_exec
unconditionally. This is wrong if we race with our sub-thread which
also does do_execve:

	Two threads T1 and T2 and another process P, all share the same
	->fs.

	T1 starts do_execve(BAD_FILE). It calls check_unsafe_exec(), since
	->fs is shared, we set LSM_UNSAFE but not ->in_exec.

	P exits and decrements fs->users.

	T2 starts do_execve(), calls check_unsafe_exec(), now ->fs is not
	shared, we set fs->in_exec.

	T1 continues, open_exec(BAD_FILE) fails, we clear ->in_exec and
	return to the user-space.

	T1 does clone(CLONE_FS /* without CLONE_THREAD */).

	T2 continues without LSM_UNSAFE_SHARE while ->fs is shared with
	another process.

Change check_unsafe_exec() to return res = 1 if we set ->in_exec, and change
do_execve() to clear ->in_exec depending on res.

When do_execve() suceeds, it is safe to clear ->in_exec unconditionally.
It can be set only if we don't share ->fs with another process, and since
we already killed all sub-threads either ->in_exec == 0 or we are the
only user of this ->fs.

Also, we do not need fs->lock to clear fs->in_exec.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Roland McGrath <roland@redhat.com>
Acked-by: Hugh Dickins <hugh@veritas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Currently we look it up from ->ioprio, but ->ioprio can change if
either the process gets its IO priority changed explicitly, or if
cfq decides to temporarily boost it. So if we are unlucky, we can
end up attempting to remove a node from a different rbtree root than
where it was added.

Fix this by using ->org_ioprio as the prio_tree index, since that
will only change for explicit IO priority settings (not for a boost).
Additionally cache the rbtree root inside the cfqq, then we don't have
to add code to reinsert the cfqq in the prio_tree if IO priority changes.
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>