- 29 Jul, 2024 12 commits
-
-
Paolo Abeni authored
Currently the per connection announced address counter is never decreased. As a consequence, after connection establishment, if the NL PM deletes an endpoint and adds a new/different one, no additional subflow is created for the new endpoint even if the current limits allow that. Address the issue properly updating the signaled address counter every time the NL PM removes such addresses. Fixes: 01cacb00 ("mptcp: add netlink-based PM") Cc: stable@vger.kernel.org Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Reviewed-by:
Matthieu Baerts (NGI0) <matttbe@kernel.org> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Paolo Abeni authored
Currently the per-connection announced address counter is never decreased. When the user-space PM is in use, this just affect the information exposed via diag/sockopt, but it could still foul the PM to wrong decision. Add the missing accounting for the user-space PM's sake. Fixes: 8b1c94da ("mptcp: only send RM_ADDR in nl_cmd_remove") Cc: stable@vger.kernel.org Signed-off-by:
-
Kuniyuki Iwashima authored
The cited commit accidentally replaced tgt_net with net in rtnl_dellink(). As a result, IFLA_TARGET_NETNSID is ignored if the interface is specified with IFLA_IFNAME or IFLA_ALT_IFNAME. Let's pass tgt_net to rtnl_dev_get(). Fixes: cc6090e9 ("net: rtnetlink: introduce helper to get net_device instance by ifname") Signed-off-by:
Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Andy Chiu authored
softirq may get lost if an Rx interrupt comes before we call napi_enable. Move napi_enable in front of axienet_setoptions(), which turns on the device, to address the issue. Link: https://lists.gnu.org/archive/html/qemu-devel/2024-07/msg06160.html Fixes: cc37610c ("net: axienet: implement NAPI and GRO receive") Signed-off-by:
Andy Chiu <andy.chiu@sifive.com> Reviewed-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Subash Abhinov Kasiviswanathan authored
tp->scaling_ratio is not updated based on skb->len/skb->truesize once SO_RCVBUF is set leading to the maximum window scaling to be 25% of rcvbuf after commit dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale") and 50% of rcvbuf after commit 697a6c8c ("tcp: increase the default TCP scaling ratio"). 50% tries to emulate the behavior of older kernels using sysctl_tcp_adv_win_scale with default value. Systems which were using a different values of sysctl_tcp_adv_win_scale in older kernels ended up seeing reduced download speeds in certain cases as covered in https://lists.openwall.net/netdev/2024/05/15/13 While the sysctl scheme is no longer acceptable, the value of 50% is a bit conservative when the skb->len/skb->truesize ratio is later determined to be ~0.66. Applications not specifying SO_RCVBUF update the window scaling and the receiver buffer every time data is copied to userspace. This computation is now used for applications setting SO_RCVBUF to update the maximum window scaling while ensuring that the receive buffer is within the application specified limit. Fixes: dfa2f048 ("tcp: get rid of sysctl_tcp_adv_win_scale") Signed-off-by:
Sean Tranchetti <quic_stranche@quicinc.com> Signed-off-by:
Subash Abhinov Kasiviswanathan <quic_subashab@quicinc.com> Reviewed-by:
-
David S. Miller authored
Jakub Kicinski says; ==================== ethtool: more RSS fixes More fixes for RSS setting. First two patches fix my own bugs in bnxt conversion to the new API. The third patch fixes what seems to be a 10 year old issue (present since the Linux RSS API was created). Fourth patch fixes an issue with the XArray state being out of sync. And then a small test. ==================== Signed-off-by: -
Jakub Kicinski authored
We had a handful of bugs relating to key being either all 0 or just reported incorrectly as all 0. Check for this in the tests. Signed-off-by:
Petr Machata <petrm@nvidia.com> Signed-off-by:
-
Jakub Kicinski authored
We expect drivers implementing the new create/modify/destroy API to populate the defaults in struct ethtool_rxfh_context. In legacy API ctx isn't even passed, and rxfh.indir / rxfh.key are NULL so drivers can't give us defaults even if they want to. Call get_rxfh() to fetch the values. We can reuse rxfh_dev for the get_rxfh(), rxfh stores the input from the user. This fixes IOCTL reporting 0s instead of the default key / indir table for drivers using legacy API. Add a check to try to catch drivers using the new API but not populating the key. Fixes: 7964e788 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts") Signed-off-by:
Edward Cree <ecree.xilinx@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
The indirection table and the key follow struct ethtool_rxfh in user memory. To reset the indirection table user space calls SET_RXFH with table of size 0 (OTOH to say "no change" it should use -1 / ~0). The logic for calculating the offset where they key sits is incorrect in this case, as kernel would still offset by the full table length, while for the reset there is no indir table and key is immediately after the struct. $ ethtool -X eth0 default hkey 01:02:03... $ ethtool -x eth0 [...] RSS hash key: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 [...] Fixes: 3de0b592 ("ethtool: Support for configurable RSS hash key") Signed-off-by:
-
Jakub Kicinski authored
As described in the kdoc for .create_rxfh_context we are responsible for populating the defaults. The core will not call .get_rxfh for non-0 context. The problem can be easily observed since Netlink doesn't currently use the cache. Using netlink ethtool: $ ethtool -x eth0 context 1 [...] RSS hash key: 13:60:cd:60:14:d3:55:36:86:df:90:f2:96:14:e2:21:05:57:a8:8f:a5:12:5e:54:62:7f:fd:3c:15:7e:76:05:71:42:a2:9a:73:80:09:9c RSS hash function: toeplitz: on xor: off crc32: off But using IOCTL ethtool shows: $ ./ethtool-old -x eth0 context 1 [...] RSS hash key: 00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00:00 RSS hash function: Operation not supported Fixes: 7964e788 ("net: ethtool: use the tracking array for get_rxfh on custom RSS contexts") Signed-off-by:Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by:
-
Jakub Kicinski authored
In commit under Fixes I split the bnxt_set_rxfh_context() function, and attached the appropriate chunks to new ops. I missed that bnxt_set_rxfh_context() gets called after some initial checks in bnxt_set_rxfh(), namely that the hash function is Toeplitz. Fixes: 5c466b4d ("eth: bnxt: move from .set_rxfh to .create_rxfh_context and friends") Signed-off-by:
-
Jeongjun Park authored
There are cases where do_xdp_generic returns bpf_net_context without clearing it. This causes various memory corruptions, so the missing bpf_net_ctx_clear must be added. Reported-by: syzbot+44623300f057a28baf1e@syzkaller.appspotmail.com Fixes: fecef4cd ("tun: Assign missing bpf_net_context.") Signed-off-by:
Jeongjun Park <aha310510@gmail.com> Acked-by:
Jason Wang <jasowang@redhat.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Reported-by: syzbot+3c2b6d5d4bec3b904933@syzkaller.appspotmail.com Reported-by: syzbot+707d98c8649695eaf329@syzkaller.appspotmail.com Reported-by: syzbot+c226757eb784a9da3e8b@syzkaller.appspotmail.com Reported-by: syzbot+61a1cfc2b6632363d319@syzkaller.appspotmail.com Reported-by: syzbot+709e4c85c904bcd62735@syzkaller.appspotmail.com Signed-off-by:
-
- 27 Jul, 2024 3 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetoothJakub Kicinski authored
Luiz Augusto von Dentz says: ==================== bluetooth pull request for net: - btmtk: Fix kernel crash when entering btmtk_usb_suspend - btmtk: Fix btmtk.c undefined reference build error - btintel: Fail setup on error - hci_sync: Fix suspending with wrong filter policy - hci_event: Fix setting DISCOVERY_FINDING for passive scanning * tag 'for-net-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth: Bluetooth: hci_event: Fix setting DISCOVERY_FINDING for passive scanning Bluetooth: btmtk: remove #ifdef around declarations Bluetooth: btmtk: Fix btmtk.c undefined reference build error harder Bluetooth: btmtk: Fix btmtk.c undefined reference build error Bluetooth: hci_sync: Fix suspending with wrong filter policy Bluetooth: btmtk: Fix kernel crash when entering btmtk_usb_suspend Bluetooth: btintel: Fail setup on error ==================== Link: https://patch.msgid.link/20240726150502.3300832-1-luiz.dentz@gmail.comSigned-off-by:
-
Alexander Duyck authored
In testing the recent kernel I found that the fbnic driver couldn't be enabled on x86_64 builds. A bit of digging showed that the fbnic driver was the only one to check for S390 to be n, all others had checked for !S390. Since it is a boolean and not a tristate I am not sure it will be N. So just update it to use the !S390 flag. A quick check via "make menuconfig" verified that after making this change there was an option to select the fbnic driver. Fixes 0e03c643 ("eth: fbnic: fix s390 build.") Signed-off-by:
Alexander Duyck <alexanderduyck@fb.com> Reviewed-by:
Joe Damato <jdamato@fastly.com> Link: https://patch.msgid.link/172192698293.1903337.4255690118685300353.stgit@ahduyck-xeon-server.home.arpaSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wirelessJakub Kicinski authored
Johannes Berg says: ==================== Couple of more urgent fixes: * ath12k: wowlan loop iteration issue * ath12k: fix soft lockup on suspend in certain scenarios * mt76: fix crash when removing an interface * mac80211: fix injection crash with some drivers that don't want monitor vif * cfg80211: fix S1G beacon parsing in scan * cfg80211: fix MLO link status reporting on connect * tag 'wireless-2024-07-26' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: ath12k: fix soft lockup on suspend wifi: mt76: mt7921: fix null pointer access in mt792x_mac_link_bss_remove wifi: ath12k: fix reusing outside iterator in ath12k_wow_vif_set_wakeups() wifi: cfg80211: correct S1G beacon length calculation wifi: cfg80211: fix reporting failed MLO links status with cfg80211_connect_done wifi: mac80211: use monitor sdata with driver only if desired ==================== Link: https://patch.msgid.link/20240726122638.942420-3-johannes@sipsolutions.netSigned-off-by:
-
- 26 Jul, 2024 16 commits
-
-
Luiz Augusto von Dentz authored
DISCOVERY_FINDING shall only be set for active scanning as passive scanning is not meant to generate MGMT Device Found events causing discovering state to go out of sync since userspace would believe it is discovering when in fact it is just passive scanning. Cc: stable@vger.kernel.org Link: https://bugzilla.kernel.org/show_bug.cgi?id=219088 Fixes: 2e2515c1 ("Bluetooth: hci_event: Set DISCOVERY_FINDING on SCAN_ENABLED") Signed-off-by:
Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
-
Arnd Bergmann authored
The caller of these functions in btusb.c is guarded with an if(IS_ENABLED()) style check, so dead code is left out, but the declarations are still needed at compile time: drivers/bluetooth/btusb.c: In function 'btusb_mtk_reset': drivers/bluetooth/btusb.c:2705:15: error: implicit declaration of function 'btmtk_usb_subsys_reset' [-Wimplicit-function-declaration] 2705 | err = btmtk_usb_subsys_reset(hdev, btmtk_data->dev_id); | ^~~~~~~~~~~~~~~~~~~~~~ drivers/bluetooth/btusb.c: In function 'btusb_send_frame_mtk': drivers/bluetooth/btusb.c:2720:23: error: implicit declaration of function 'alloc_mtk_intr_urb' [-Wimplicit-function-declaration] 2720 | urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete); | ^~~~~~~~~~~~~~~~~~ drivers/bluetooth/btusb.c:2720:21: error: assignment to 'struct urb *' from 'int' makes pointer from integer without a cast [-Wint-conversion] 2720 | urb = alloc_mtk_intr_urb(hdev, skb, btusb_tx_complete); | ^ Fixes: f0c83a23 ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com> Signed-off-by:
-
Arnd Bergmann authored
The previous fix was incomplete as the link failure still persists with CONFIG_USB=m when the sdio or serial wrappers for btmtk.c are build-in: btmtk.c:(.text+0x468): undefined reference to `usb_alloc_urb' btmtk.c:(.text+0x488): undefined reference to `usb_free_urb' btmtk.c:(.text+0x500): undefined reference to `usb_anchor_urb' btmtk.c:(.text+0x50a): undefined reference to `usb_submit_urb' btmtk.c:(.text+0x92c): undefined reference to `usb_control_msg' btmtk.c:(.text+0xa92): undefined reference to `usb_unanchor_urb' btmtk.c:(.text+0x11e4): undefined reference to `usb_set_interface' btmtk.c:(.text+0x120a): undefined reference to `usb_kill_anchored_urbs' Disallow this configuration. Fixes: f0c83a23 ("Bluetooth: btmtk: Fix btmtk.c undefined reference build error") Signed-off-by:
-
Chris Lu authored
MediaTek moved some usb interface related function to btmtk.c which may cause build failed if BT USB Kconfig wasn't enabled. Fix undefined reference by adding config check. btmtk.c:(.text+0x89c): undefined reference to `usb_alloc_urb' btmtk.c:(.text+0x8e3): undefined reference to `usb_free_urb' btmtk.c:(.text+0x956): undefined reference to `usb_free_urb' btmtk.c:(.text+0xa0e): undefined reference to `usb_anchor_urb' btmtk.c:(.text+0xb43): undefined reference to `usb_autopm_get_interface' btmtk.c:(.text+0xb7e): undefined reference to `usb_autopm_put_interface' btmtk.c:(.text+0xf70): undefined reference to `usb_disable_autosuspend' btmtk.c:(.text+0x133a): undefined reference to `usb_control_msg' Fixes: d019930b ("Bluetooth: btmtk: move btusb_mtk_hci_wmt_sync to btmtk.c") Reported-by:
kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202407091928.AH0aGZnx-lkp@intel.com/Signed-off-by:
Chris Lu <chris.lu@mediatek.com> Signed-off-by:
-
Luiz Augusto von Dentz authored
When suspending the scan filter policy cannot be 0x00 (no acceptlist) since that means the host has to process every advertisement report waking up the system, so this attempts to check if hdev is marked as suspended and if the resulting filter policy would be 0x00 (no acceptlist) then skip passive scanning if thre no devices in the acceptlist otherwise reset the filter policy to 0x01 so the acceptlist is used since the devices programmed there can still wakeup be system. Fixes: 182ee45d ("Bluetooth: hci_sync: Rework hci_suspend_notifier") Signed-off-by:
-
Chris Lu authored
If MediaTek's Bluetooth setup is unsuccessful, a NULL pointer issue occur when the system is suspended and the anchored kill function is called. To avoid this, add protection to prevent executing the anchored kill function if the setup is unsuccessful. [ 6.922106] Hardware name: Acer Tomato (rev2) board (DT) [ 6.922114] Workqueue: pm pm_runtime_work [ 6.922132] pstate: 804000c9 (Nzcv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 6.922147] pc : usb_kill_anchored_urbs+0x6c/0x1e0 [ 6.922164] lr : usb_kill_anchored_urbs+0x48/0x1e0 [ 6.922181] sp : ffff800080903b60 [ 6.922187] x29: ffff800080903b60 x28: ffff2c7b85c32b80 x27: ffff2c7bbb370930 [ 6.922211] x26: 00000000000f4240 x25: 00000000ffffffff x24: ffffd49ece2dcb48 [ 6.922255] x20: ffffffffffffffd8 x19: 0000000000000000 x18: 0000000000000006 [ 6.922276] x17: 6531656337386238 x16: 3632373862333863 x15: ffff800080903480 [ 6.922297] x14: 0000000000000000 x13: 303278302f303178 x12: ffffd49ecf090e30 [ 6.922318] x11: 0000000000000001 x10: 0000000000000001 x9 : ffffd49ecd2c5bb4 [ 6.922339] x8 : c0000000ffffdfff x7 : ffffd49ecefe0db8 x6 : 00000000000affa8 [ 6.922360] x5 : ffff2c7bbb35dd48 x4 : 0000000000000000 x3 : 0000000000000000 [ 6.922379] x2 : 0000000000000000 x1 : 0000000000000003 x0 : ffffffffffffffd8 [ 6.922400] Call trace: [ 6.922405] usb_kill_anchored_urbs+0x6c/0x1e0 [ 6.922422] btmtk_usb_suspend+0x20/0x38 [btmtk 5f200a97badbdfda4266773fee49acfc8e0224d5] [ 6.922444] btusb_suspend+0xd0/0x210 [btusb 0bfbf19a87ff406c83b87268b87ce1e80e9a829b] [ 6.922469] usb_suspend_both+0x90/0x288 [ 6.922487] usb_runtime_suspend+0x3c/0xa8 [ 6.922507] __rpm_callback+0x50/0x1f0 [ 6.922523] rpm_callback+0x70/0x88 [ 6.922538] rpm_suspend+0xe4/0x5a0 [ 6.922553] pm_runtime_work+0xd4/0xe0 [ 6.922569] process_one_work+0x18c/0x440 [ 6.922588] worker_thread+0x314/0x428 [ 6.922606] kthread+0x128/0x138 [ 6.922621] ret_from_fork+0x10/0x20 [ 6.922644] Code: f100a274 54000520 d503201f d100a260 (b8370000) [ 6.922654] ---[ end trace 0000000000000000 ]--- Fixes: ceac1cb0 ("Bluetooth: btusb: mediatek: add ISO data transmission functions") Signed-off-by:
Nícolas F. R. A. Prado <nfraprado@collabora.com> Signed-off-by:
-
Kiran K authored
Do not attempt to send any hci command to controller if *setup* function fails. Fixes: af395330 ("Bluetooth: btintel: Add Intel devcoredump support") Signed-off-by:
Kiran K <kiran.k@intel.com> Signed-off-by:
-
Mark Mentovai authored
The PHY built in to the Realtek RTL8366S switch controller was previously supported by genphy_driver. This PHY does not implement MMD operations. Since commit 9b01c885 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()"), MMD register reads have been made during phy_probe to determine EEE support. For genphy_driver, these reads are transformed into 802.3 annex 22D clause 45-over-clause 22 mmd_phy_indirect operations that perform MII register writes to MII_MMD_CTRL and MII_MMD_DATA. This overwrites those two MII registers, which on this PHY are reserved and have another function, rendering the PHY unusable while so configured. Proper support for this PHY is restored by providing a phy_driver that declares MMD operations as unsupported by using the helper functions provided for that purpose, while remaining otherwise identical to genphy_driver. Fixes: 9b01c885 ("net: phy: c22: migrate to genphy_c45_write_eee_adv()") Reported-by:
Russell Senior <russell@personaltelco.net> Closes: https://github.com/openwrt/openwrt/issues/15981 Link: https://github.com/openwrt/openwrt/issues/15739Signed-off-by:
Mark Mentovai <mark@mentovai.com> Reviewed-by:
Maxime Chevallier <maxime.chevallier@bootlin.com> Signed-off-by:
-
Johan Hovold authored
The ext interrupts are enabled when the firmware has been started, but this may never happen, for example, if the board configuration file is missing. When the system is later suspended, the driver unconditionally tries to disable interrupts, which results in an irq disable imbalance and causes the driver to spin indefinitely in napi_synchronize(). Make sure that the interrupts have been enabled before attempting to disable them. Fixes: d8899132 ("wifi: ath12k: driver for Qualcomm Wi-Fi 7 devices") Cc: stable@vger.kernel.org # 6.3 Signed-off-by:
Johan Hovold <johan+linaro@kernel.org> Acked-by:
Jeff Johnson <quic_jjohnson@quicinc.com> Link: https://patch.msgid.link/20240709073132.9168-1-johan+linaro@kernel.orgSigned-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Sean Wang authored
Fix null pointer access in mt792x_mac_link_bss_remove. To prevent null pointer access, we should assign the vif to bss_conf in mt7921_add_interface. This ensures that subsequent operations on the BSS can properly reference the correct vif. [ T843] Call Trace: [ T843] <TASK> [ T843] ? __die+0x1e/0x60 [ T843] ? page_fault_oops+0x157/0x450 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? search_bpf_extables+0x5a/0x80 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? exc_page_fault+0x2bb/0x670 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? lock_timer_base+0x71/0x90 [ T843] ? asm_exc_page_fault+0x26/0x30 [ T843] ? mt792x_mac_link_bss_remove+0x24/0x110 [mt792x_lib] [ T843] ? mt792x_remove_interface+0x6e/0x90 [mt792x_lib] [ T843] ? ieee80211_do_stop+0x507/0x7e0 [mac80211] [ T843] ? ieee80211_stop+0x53/0x190 [mac80211] [ T843] ? __dev_close_many+0xa5/0x120 [ T843] ? __dev_change_flags+0x18c/0x220 [ T843] ? dev_change_flags+0x21/0x60 [ T843] ? do_setlink+0xdf9/0x11d0 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? security_sock_rcv_skb+0x33/0x50 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? __nla_validate_parse+0x61/0xd10 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? genl_done+0x53/0x80 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? netlink_dump+0x357/0x410 [ T843] ? __rtnl_newlink+0x5d6/0x980 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? genl_family_rcv_msg_dumpit+0xdf/0xf0 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? __kmalloc_cache_noprof+0x44/0x210 [ T843] ? rtnl_newlink+0x42/0x60 [ T843] ? rtnetlink_rcv_msg+0x152/0x3f0 [ T843] ? mptcp_pm_nl_dump_addr+0x180/0x180 [ T843] ? rtnl_calcit.isra.0+0x130/0x130 [ T843] ? netlink_rcv_skb+0x56/0x100 [ T843] ? netlink_unicast+0x199/0x290 [ T843] ? netlink_sendmsg+0x21d/0x490 [ T843] ? __sock_sendmsg+0x78/0x80 [ T843] ? ____sys_sendmsg+0x23f/0x2e0 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? copy_msghdr_from_user+0x68/0xa0 [ T843] ? ___sys_sendmsg+0x81/0xd0 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? crng_fast_key_erasure+0xbc/0xf0 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? get_random_bytes_user+0x126/0x140 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? __fdget+0xb1/0xe0 [ T843] ? __sys_sendmsg+0x56/0xa0 [ T843] ? srso_alias_return_thunk+0x5/0xfbef5 [ T843] ? do_syscall_64+0x5f/0x170 [ T843] ? entry_SYSCALL_64_after_hwframe+0x55/0x5d [ T843] </TASK> Fixes: 1541d63c ("wifi: mt76: mt7925: add mt7925_mac_link_bss_remove to remove per-link BSS") Reported-by:
Bert Karwatzki <spasswolf@web.de> Closes: https://lore.kernel.org/linux-wireless/2fee61f8c903d02a900ca3188c3742c7effd102e.camel@web.de/#bSigned-off-by:
Sean Wang <sean.wang@mediatek.com> Tested-by:
-
Baochen Qiang authored
Smatch throws below warning: drivers/net/wireless/ath/ath12k/wow.c:434 ath12k_wow_vif_set_wakeups() warn: reusing outside iterator: 'i' drivers/net/wireless/ath/ath12k/wow.c 411 default: 412 break; 413 } 414 415 for (i = 0; i < wowlan->n_patterns; i++) { ^^^^^^^^^^^^^^^^^^^^^^ Here we loop until ->n_patterns 416 const struct cfg80211_pkt_pattern *eth_pattern = &patterns[i]; 417 struct ath12k_pkt_pattern new_pattern = {}; 418 419 if (WARN_ON(eth_pattern->pattern_len > WOW_MAX_PATTERN_SIZE)) 420 return -EINVAL; 421 422 if (ar->ab->wow.wmi_conf_rx_decap_mode == 423 ATH12K_HW_TXRX_NATIVE_WIFI) { 424 ath12k_wow_convert_8023_to_80211(ar, eth_pattern, 425 &new_pattern); 426 427 if (WARN_ON(new_pattern.pattern_len > WOW_MAX_PATTERN_SIZE)) 428 return -EINVAL; 429 } else { 430 memcpy(new_pattern.pattern, eth_pattern->pattern, 431 eth_pattern->pattern_len); 432 433 /* convert bitmask to bytemask */ --> 434 for (i = 0; i < eth_pattern->pattern_len; i++) 435 if (eth_pattern->mask[i / 8] & BIT(i % 8)) 436 new_pattern.bytemask[i] = 0xff; This loop re-uses i and the loop ends with i == eth_pattern->pattern_len. This looks like a bug. Change to use a new iterator 'j' for the inner loop to fix it. Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.0-03427-QCAHMTSWPL_V1.0_V2.0_SILICONZ-1.15378.4 Fixes: 4a3c212e ("wifi: ath12k: add basic WoW functionalities") Reported-by:Dan Carpenter <dan.carpenter@linaro.org> Closes: https://lore.kernel.org/all/d4975b95-9c43-45af-a0ab-80253f18c7f2@stanley.mountain/Signed-off-by:
Baochen Qiang <quic_bqiang@quicinc.com> Acked-by:
-
Johannes Berg authored
The minimum header length calculation (equivalent to the start of the elements) for the S1G long beacon erroneously required only up to the start of u.s1g_beacon rather than the start of u.s1g_beacon.variable. Fix that, and also shuffle the branches around a bit to not assign useless values that are overwritten later. Reported-by: syzbot+0f3afa93b91202f21939@syzkaller.appspotmail.com Fixes: 9eaffe50 ("cfg80211: convert S1G beacon to scan results") Link: https://patch.msgid.link/20240724132912.9662972db7c1.I8779675b5bbda4994cc66f876b6b87a2361c3c0b@changeidSigned-off-by:
-
Veerendranath Jakkam authored
Individual MLO links connection status is not copied to EVENT_CONNECT_RESULT data while processing the connect response information in cfg80211_connect_done(). Due to this failed links are wrongly indicated with success status in EVENT_CONNECT_RESULT. To fix this, copy the individual MLO links status to the EVENT_CONNECT_RESULT data. Fixes: 53ad07e9 ("wifi: cfg80211: support reporting failed links") Signed-off-by:
Veerendranath Jakkam <quic_vjakkam@quicinc.com> Reviewed-by:
Carlos Llamas <cmllamas@google.com> Link: https://patch.msgid.link/20240724125327.3495874-1-quic_vjakkam@quicinc.com [commit message editorial changes] Signed-off-by:
-
Johannes Berg authored
In commit 0d9c2bee ("wifi: mac80211: fix monitor channel with chanctx emulation") I changed mac80211 to always have an internal monitor_sdata to have something to have the chanctx bound to. However, if the driver didn't also have the WANT_MONITOR flag this would cause mac80211 to allocate it without telling the driver (which was intentional) but also use it for later APIs to the driver without it ever having known about it which was _not_ intentional. Check through the code and only use the monitor_sdata in the relevant places (TX, MU-MIMO follow settings, TX power, and interface iteration) when the WANT_MONITOR flag is set. Cc: stable@vger.kernel.org Fixes: 0d9c2bee ("wifi: mac80211: fix monitor channel with chanctx emulation") Reported-by:
ZeroBeat <ZeroBeat@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219086Tested-by:
Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20240725184836.25d334157a8e.I02574086da2c5cf0e18264ce5807db6f14ffd9c0@changeidSigned-off-by:
-
Eric Dumazet authored
Blamed commit increased lookup key size from 2 bytes to 16 bytes, because zones_ht_key got a struct net pointer. Make sure rhashtable_lookup() is not using the padding bytes which are not initialized. BUG: KMSAN: uninit-value in rht_ptr_rcu include/linux/rhashtable.h:376 [inline] BUG: KMSAN: uninit-value in __rhashtable_lookup include/linux/rhashtable.h:607 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup include/linux/rhashtable.h:646 [inline] BUG: KMSAN: uninit-value in rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] BUG: KMSAN: uninit-value in tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 rht_ptr_rcu include/linux/rhashtable.h:376 [inline] __rhashtable_lookup include/linux/rhashtable.h:607 [inline] rhashtable_lookup include/linux/rhashtable.h:646 [inline] rhashtable_lookup_fast include/linux/rhashtable.h:672 [inline] tcf_ct_flow_table_get+0x611/0x2260 net/sched/act_ct.c:329 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 tcf_action_init_1+0x6cc/0xb30 net/sched/act_api.c:1425 tcf_action_init+0x458/0xf00 net/sched/act_api.c:1488 tcf_action_add net/sched/act_api.c:2061 [inline] tc_ctl_action+0x4be/0x19d0 net/sched/act_api.c:2118 rtnetlink_rcv_msg+0x12fc/0x1410 net/core/rtnetlink.c:6647 netlink_rcv_skb+0x375/0x650 net/netlink/af_netlink.c:2550 rtnetlink_rcv+0x34/0x40 net/core/rtnetlink.c:6665 netlink_unicast_kernel net/netlink/af_netlink.c:1331 [inline] netlink_unicast+0xf52/0x1260 net/netlink/af_netlink.c:1357 netlink_sendmsg+0x10da/0x11e0 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg+0x30f/0x380 net/socket.c:745 ____sys_sendmsg+0x877/0xb60 net/socket.c:2597 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2651 __sys_sendmsg net/socket.c:2680 [inline] __do_sys_sendmsg net/socket.c:2689 [inline] __se_sys_sendmsg net/socket.c:2687 [inline] __x64_sys_sendmsg+0x307/0x4a0 net/socket.c:2687 x64_sys_call+0x2dd6/0x3c10 arch/x86/include/generated/asm/syscalls_64.h:47 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0xcd/0x1e0 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x77/0x7f Local variable key created at: tcf_ct_flow_table_get+0x4a/0x2260 net/sched/act_ct.c:324 tcf_ct_init+0xa67/0x2890 net/sched/act_ct.c:1408 Fixes: 88c67aeb ("sched: act_ct: add netns into the key of tcf_ct_flow_table") Reported-by: syzbot+1b5e4e187cc586d05ea0@syzkaller.appspotmail.com Signed-off-by:
Simon Horman <horms@kernel.org> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Ma Ke authored
It could lead to error happen because the variable res is not updated if the call to sr_share_read_word returns an error. In this particular case error code was returned and res stayed uninitialized. Same issue also applies to sr_read_reg. This can be avoided by checking the return value of sr_share_read_word and sr_read_reg, and propagating the error if the read operation failed. Found by code review. Cc: stable@vger.kernel.org Fixes: c9b37458 ("USB2NET : SR9700 : One chip USB 1.1 USB2NET SR9700Device Driver Support") Signed-off-by:
Ma Ke <make24@iscas.ac.cn> Reviewed-by:
Shigeru Yoshida <syoshida@redhat.com> Reviewed-by:
Hariprasad Kelam <hkelam@marvell.com> Signed-off-by:
-
- 25 Jul, 2024 9 commits
-
-
Jakub Kicinski authored
Jakub Kicinski says: ==================== ethtool: rss: small fixes to spec and GET Two small fixes to the ethtool RSS_GET over Netlink. Spec is a bit inaccurate and responses miss an identifier. ==================== Link: https://patch.msgid.link/20240724234249.2621109-1-kuba@kernel.orgSigned-off-by:
-
Jakub Kicinski authored
The response to a GET request in Netlink should fully identify the queried object. RSS_GET accepts context id as an input, so it must echo that attribute back to the response. After (assuming context 1 has been created): $ ./cli.py --spec netlink/specs/ethtool.yaml \ --do rss-get \ --json '{"header": {"dev-index": 2}, "context": 1}' {'context': 1, 'header': {'dev-index': 2, 'dev-name': 'eth0'}, [...] Fixes: 7112a046 ("ethtool: add netlink based get rss support") Acked-by: -
Jakub Kicinski authored
The spec for Ethtool is a bit inaccurate. We don't currently support dump. Context is only accepted as input and not echoed to output (which is a separate bug). Fixes: a353318e ("tools: ynl: populate most of the ethtool spec") Acked-by:
-
Pavan Chebbi authored
In __bnxt_reserve_rings(), the existing code unconditionally sets the default RSS indirection table to default if netif_is_rxfh_configured() returns false. This used to be correct before we added RSS contexts support. For example, if the user is changing the number of ethtool channels, we will enter this path to reserve the new number of rings. We will then set the RSS indirection table to default to cover the new number of rings if netif_is_rxfh_configured() is false. Now, with RSS contexts support, if the user has added or deleted RSS contexts, we may now enter this path to reserve the new number of VNICs. However, netif_is_rxfh_configured() will not return the correct state if we are still in the middle of set_rxfh(). So the existing code may set the indirection table of the default RSS context to default by mistake. Fix it to check if the reservation of the RX rings is changing. Only check netif_is_rxfh_configured() if it is changing. RX rings will not change in the middle of set_rxfh() and this will fix the issue. Fixes: b3d0083c ("bnxt_en: Support RSS contexts in ethtool .{get|set}_rxfh()") Reported-and-tested-by:
Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by:
Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20240724222106.147744-1-michael.chan@broadcom.comSigned-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds authored
Pull networking fixes from Jakub Kicinski: "Including fixes from bpf and netfilter. A lot of networking people were at a conference last week, busy catching COVID, so relatively short PR. Current release - regressions: - tcp: process the 3rd ACK with sk_socket for TFO and MPTCP Current release - new code bugs: - l2tp: protect session IDR and tunnel session list with one lock, make sure the state is coherent to avoid a warning - eth: bnxt_en: update xdp_rxq_info in queue restart logic - eth: airoha: fix location of the MBI_RX_AGE_SEL_MASK field Previous releases - regressions: - xsk: require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len, the field reuses previously un-validated pad Previous releases - always broken: - tap/tun: drop short frames to prevent crashes later in the stack - eth: ice: add a per-VF limit on number of FDIR filters - af_unix: disable MSG_OOB handling for sockets in sockmap/sockhash" * tag 'net-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (34 commits) tun: add missing verification for short frame tap: add missing verification for short frame mISDN: Fix a use after free in hfcmulti_tx() gve: Fix an edge case for TSO skb validity check bnxt_en: update xdp_rxq_info in queue restart logic tcp: process the 3rd ACK with sk_socket for TFO/MPTCP selftests/bpf: Add XDP_UMEM_TX_METADATA_LEN to XSK TX metadata test xsk: Require XDP_UMEM_TX_METADATA_LEN to actuate tx_metadata_len bpf: Fix a segment issue when downgrading gso_size net: mediatek: Fix potential NULL pointer dereference in dummy net_device handling MAINTAINERS: make Breno the netconsole maintainer MAINTAINERS: Update bonding entry net: nexthop: Initialize all fields in dumped nexthops net: stmmac: Correct byte order of perfect_match selftests: forwarding: skip if kernel not support setting bridge fdb learning limit tipc: Return non-zero value from tipc_udp_addr2str() on error netfilter: nft_set_pipapo_avx2: disable softinterrupts ice: Fix recipe read procedure ice: Add a per-VF limit on number of FDIR filters net: bonding: correctly annotate RCU in bond_should_notify_peers() ... -
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linuxLinus Torvalds authored
Pull printk updates from Petr Mladek: - trivial printk changes The bigger "real" printk work is still being discussed. * tag 'printk-for-6.11-trivial' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: vsprintf: add missing MODULE_DESCRIPTION() macro printk: Rename console_replay_all() and update context
-
git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctlLinus Torvalds authored
Pull sysctl constification from Joel Granados: "Treewide constification of the ctl_table argument of proc_handlers using a coccinelle script and some manual code formatting fixups. This is a prerequisite to moving the static ctl_table structs into read-only data section which will ensure that proc_handler function pointers cannot be modified" * tag 'constfy-sysctl-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/sysctl/sysctl: sysctl: treewide: constify the ctl_table argument of proc_handlers
-
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efiLinus Torvalds authored
Pull EFI fixes from Ard Biesheuvel: - Wipe screen_info after allocating it from the heap - used by arm32 and EFI zboot, other EFI architectures allocate it statically - Revert to allocating boot_params from the heap on x86 when entering via the native PE entrypoint, to work around a regression on older Dell hardware * tag 'efi-fixes-for-v6.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Revert to heap allocated boot_params for PE entrypoint efi/libstub: Zero initialize heap allocated struct screen_info
-
git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linuxLinus Torvalds authored
Pull kgdb updates from Daniel Thompson: "Three small changes this cycle: - Clean up an architecture abstraction that is no longer needed because all the architectures have converged. - Actually use the prompt argument to kdb_position_cursor() instead of ignoring it (functionally this fix is a nop but that was due to luck rather than good judgement) - Fix a -Wformat-security warning" * tag 'kgdb-6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: Get rid of redundant kdb_curr_task() kdb: Use the passed prompt in kdb_position_cursor() kdb: address -Wformat-security warnings
-
