Skip to content

L
linux
Switch branch/tag
  1. 05 Oct, 2018 30 commits
  3. 04 Oct, 2018 10 commits
    • Hangbin Liu's avatar
      geneve: allow to clear ttl inherit · a97d97ba
      Hangbin Liu authored 
      As Michal remaind, we should allow to clear ttl inherit. Then we will
have three states:

1. set the flag, and do ttl inherit.
2. do not set the flag, use configured ttl value, or default ttl (0) if
   not set.
3. disable ttl inherit, use previous configured ttl value, or default ttl (0).

Fixes: 52d0d404 ("geneve: add ttl inherit support")
CC: Michal Kubecek <mkubecek@suse.cz>
Signed-off-by: default avatarHangbin Liu <liuhangbin@gmail.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      a97d97ba
    • Vinicius Costa Gomes's avatar
      tc: Add support for configuring the taprio scheduler · 5a781ccb
      Vinicius Costa Gomes authored 
      This traffic scheduler allows traffic classes states (transmission
allowed/not allowed, in the simplest case) to be scheduled, according
to a pre-generated time sequence. This is the basis of the IEEE
802.1Qbv specification.

Example configuration:

tc qdisc replace dev enp3s0 parent root handle 100 taprio \
          num_tc 3 \
	  map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
	  queues 1@0 1@1 2@2 \
	  base-time 1528743495910289987 \
	  sched-entry S 01 300000 \
	  sched-entry S 02 300000 \
	  sched-entry S 04 300000 \
	  clockid CLOCK_TAI

The configuration format is similar to mqprio. The main difference is
the presence of a schedule, built by multiple "sched-entry"
definitions, each entry has the following format:

     sched-entry <CMD> <GATE MASK> <INTERVAL>

The only supported <CMD> is "S", which means "SetGateStates",
following the IEEE 802.1Qbv-2015 definition (Table 8-6). <GATE MASK>
is a bitmask where each bit is a associated with a traffic class, so
bit 0 (the least significant bit) being "on" means that traffic class
0 is "active" for that schedule entry. <INTERVAL> is a time duration
in nanoseconds that specifies for how long that state defined by <CMD>
and <GATE MASK> should be held before moving to the next entry.

This schedule is circular, that is, after the last entry is executed
it starts from the first one, indefinitely.

The other parameters can be defined as follows:

 - base-time: specifies the instant when the schedule starts, if
  'base-time' is a time in the past, the schedule will start at

 	      base-time + (N * cycle-time)

   where N is the smallest integer so the resulting time is greater
   than "now", and "cycle-time" is the sum of all the intervals of the
   entries in the schedule;

 - clockid: specifies the reference clock to be used;

The parameters should be similar to what the IEEE 802.1Q family of
specification defines.
Signed-off-by: default avatarVinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      5a781ccb
    • David S. Miller's avatar
      Merge branch 'bnxt_en-devlink-param-updates' · 34f8c58f
      David S. Miller authored 
      Vasundhara Volam says:

====================
bnxt_en: devlink param updates

This patchset adds support for 3 generic and 1 driver-specific devlink
parameters. Add documentation for these configuration parameters.

Also, this patchset adds support to return proper error code if
HWRM_NVM_GET/SET_VARIABLE commands return error code
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED.

v3->v4:
-Remove extra definition of NVM_OFF_HW_TC_OFFLOAD from bnxt_devlink.h
-Remove type information for generic parameters from
devlink-params-bnxt.txt

v2->v3:
-Remove description of generic parameters from devlink-params-bnxt.txt

v1->v2:
-Remove hw_tc_offload parameter.
-Update all patches with Cc of MAINTAINERS.
-Add more description in commit message for device specific parameter.
-Add a new Documentation/networking/devlink-params.txt with some
generic devlink parameters information.
-Add a new Documentation/networking/devlink-params-bnxt.txt with devlink
parameters information that are supported by bnxt_en driver.
====================
Acked-by: default avatarJiri Pirko <jiri@mellanox.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      34f8c58f
    • Vasundhara Volam's avatar
      devlink: Add Documentation/networking/devlink-params-bnxt.txt · 53e233ea
      Vasundhara Volam authored 
      This patch adds a new file to add information about configuration
parameters that are supported by bnxt_en driver via devlink.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      53e233ea
    • Vasundhara Volam's avatar
      devlink: Add Documentation/networking/devlink-params.txt · 9bff98bb
      Vasundhara Volam authored 
      This patch adds a new file to add information about some of the
generic configuration parameters set via devlink.

Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      9bff98bb
    • Vasundhara Volam's avatar
      bnxt_en: Add a driver specific gre_ver_check devlink parameter. · 2dc0865e
      Vasundhara Volam authored 
      This patch adds following driver-specific permanent mode boolean
parameter.

gre_ver_check - Generic Routing Encapsulation(GRE) version check
will be enabled in the device. If disabled, device skips version
checking for GRE packets.

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      2dc0865e
    • Vasundhara Volam's avatar
      bnxt_en: Use msix_vec_per_pf_max and msix_vec_per_pf_min devlink params. · f399e849
      Vasundhara Volam authored 
      This patch adds support for following generic permanent mode
devlink parameters. They can be modified using devlink param
commands.

msix_vec_per_pf_max - This param sets the number of MSIX vectors
that the device requests from the host on driver initialization.
This value is set in the device which limits MSIX vectors per PF.

msix_vec_per_pf_min - This param sets the number of minimal MSIX
vectors required for the device initialization. Value 0 indicates
a default value is selected. This value is set in the device which
limits MSIX vectors per PF.

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      f399e849
    • Vasundhara Volam's avatar
      bnxt_en: return proper error when FW returns HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED · 3a1d52a5
      Vasundhara Volam authored 
      Return proper error code when Firmware returns
HWRM_ERR_CODE_RESOURCE_ACCESS_DENIED for HWRM_NVM_GET/SET_VARIABLE
commands.

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      3a1d52a5
    • Vasundhara Volam's avatar
      bnxt_en: Use ignore_ari devlink parameter · 7d859234
      Vasundhara Volam authored 
      This patch adds support for ignore_ari generic permanent mode
devlink parameter. This parameter is disabled by default. It can be
enabled using devlink param commands.

ignore_ari - If enabled, device ignores ARI(Alternate Routing ID)
capability, even when platforms has the support and creates same number
of partitions when platform does not support ARI capability.

Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      7d859234
    • Vasundhara Volam's avatar
      devlink: Add generic parameter msix_vec_per_pf_min · 16511789
      Vasundhara Volam authored 
      msix_vec_per_pf_min - This param sets the number of minimal MSIX
vectors required for the device initialization. This value is set
in the device which limits MSIX vectors per PF.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: default avatarVasundhara Volam <vasundhara-v.volam@broadcom.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
      16511789
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7