- 16 May, 2018 36 commits
-
-
Kyle Huey authored
CVE-2018-3639 (x86) Help the compiler to avoid reevaluating the thread flags for each checked bit by reordering the bit checks and providing an explicit xor for evaluation. With default defconfigs for each arch, x86_64: arch/x86/kernel/process.o text data bss dec hex 3056 8577 16 11649 2d81 Before 3024 8577 16 11617 2d61 After i386: arch/x86/kernel/process.o text data bss dec hex 2957 8673 8 11638 2d76 Before 2925 8673 8 11606 2d56 After Originally-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
Kyle Huey <khuey@kylehuey.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Andy Lutomirski <luto@kernel.org> Link: http://lkml.kernel.org/r/20170214081104.9244-2-khuey@kylehuey.comSigned-off-by:
Juerg Haefliger <juergh@canonical.com>
-
Thomas Gleixner authored
CVE-2018-3639 (x86) Add two new prctls to control aspects of speculation related vulnerabilites and their mitigations to provide finer grained control over performance impacting mitigations. PR_GET_SPECULATION_CTRL returns the state of the speculation misfeature which is selected with arg2 of prctl(2). The return value uses bit 0-2 with the following meaning: Bit Define Description 0 PR_SPEC_PRCTL Mitigation can be controlled per task by PR_SET_SPECULATION_CTRL 1 PR_SPEC_ENABLE The speculation feature is enabled, mitigation is disabled 2 PR_SPEC_DISABLE The speculation feature is disabled, mitigation is enabled If all bits are 0 the CPU is not affected by the speculation misfeature. If PR_SPEC_PRCTL is set, then the per task control of the mitigation is available. If not set, prctl(PR_SET_SPECULATION_CTRL) for the speculation misfeature will fail. PR_SET_SPECULATION_CTRL allows to control the speculation misfeature, which is selected by arg2 of prctl(2) per task. arg3 is used to hand in the control value, i.e. either PR_SPEC_ENABLE or PR_SPEC_DISABLE. The common return values are: EINVAL prctl is not implemented by the architecture or the unused prctl() arguments are not 0 ENODEV arg2 is selecting a not supported speculation misfeature PR_SET_SPECULATION_CTRL has these additional return values: ERANGE arg3 is incorrect, i.e. it's not either PR_SPEC_ENABLE or PR_SPEC_DISABLE ENXIO prctl control of the selected speculation misfeature is disabled The first supported controlable speculation misfeature is PR_SPEC_STORE_BYPASS. Add the define so this can be shared between architectures. Based on an initial patch from Tim Chen and mostly rewritten. Signed-off-by:Ingo Molnar <mingo@kernel.org> Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [tyhicks: Minor backport for SAUCE patch context] Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
Stefan Bader <stefan.bader@canonical.com> [juergh: - Context adjustments. - Create new file include/linux/nospec.h. - Create Documentation/spec-ctrl.txt instead of Documentation/userspace-api/spec-ctrl.rst.] Signed-off-by:
-
Thomas Gleixner authored
CVE-2018-3639 (x86) Having everything in nospec-branch.h creates a hell of dependencies when adding the prctl based switching mechanism. Move everything which is not required in nospec-branch.h to spec-ctrl.h and fix up the includes in the relevant files. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) Expose the CPUID.7.EDX[31] bit to the guest, and also guard against various combinations of SPEC_CTRL MSR values. The handling of the MSR (to take into account the host value of SPEC_CTRL Bit(2)) is taken care of in patch: KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) AMD does not need the Speculative Store Bypass mitigation to be enabled. The parameters for this are already available and can be done via MSR C001_1020. Each family uses a different bit in that MSR for this. [ tglx: Expose the bit mask via a variable and move the actual MSR fiddling into the bugs code as that's the right thing to do and also required to prepare for dynamic enable/disable ] Suggested-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) Intel and AMD SPEC_CTRL (0x48) MSR semantics may differ in the future (or in fact use different MSRs for the same functionality). As such a run-time mechanism is required to whitelist the appropriate MSR values. [ tglx: Made the variable __ro_after_init ] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) Intel CPUs expose methods to: - Detect whether RDS capability is available via CPUID.7.0.EDX[31], - The SPEC_CTRL MSR(0x48), bit 2 set to enable RDS. - MSR_IA32_ARCH_CAPABILITIES, Bit(4) no need to enable RRS. With that in mind if spec_store_bypass_disable=[auto,on] is selected set at boot-time the SPEC_CTRL MSR to enable RDS if the platform requires it. Note that this does not fix the KVM case where the SPEC_CTRL is exposed to guests which can muck with it, see patch titled : KVM/SVM/VMX/x86/spectre_v2: Support the combination of guest and host IBRS. And for the firmware (IBRS to be set), see patch titled: x86/spectre_v2: Read SPEC_CTRL MSR during boot and re-use reserved bits [ tglx: Distangled it from the intel implementation and kept the call order ] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) Contemporary high performance processors use a common industry-wide optimization known as "Speculative Store Bypass" in which loads from addresses to which a recent store has occurred may (speculatively) see an older value. Intel refers to this feature as "Memory Disambiguation" which is part of their "Smart Memory Access" capability. Memory Disambiguation can expose a cache side-channel attack against such speculatively read values. An attacker can create exploit code that allows them to read memory outside of a sandbox environment (for example, malicious JavaScript in a web page), or to perform more complex attacks against code running within the same privilege level, e.g. via the stack. As a first step to mitigate against such attacks, provide two boot command line control knobs: nospec_store_bypass_disable spec_store_bypass_disable=[off,auto,on] By default affected x86 processors will power on with Speculative Store Bypass enabled. Hence the provided kernel parameters are written from the point of view of whether to enable a mitigation or not. The parameters are as follows: - auto - Kernel detects whether your CPU model contains an implementation of Speculative Store Bypass and picks the most appropriate mitigation. - on - disable Speculative Store Bypass - off - enable Speculative Store Bypass [ tglx: Reordered the checks so that the whole evaluation is not done when the CPU does not support RDS ] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) Add the CPU feature bit CPUID.7.0.EDX[31] which indicates whether the CPU supports Reduced Data Speculation. [ tglx: Split it out from a later patch ] Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) Add the sysfs file for the new vulerability. It does not do much except show the words 'Vulnerable' for recent x86 cores. Intel cores prior to family 6 are known not to be vulnerable, and so are some Atoms and some Xeon Phi. It assumes that older Cyrix, Centaur, etc. cores are immune. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) A guest may modify the SPEC_CTRL MSR from the value used by the kernel. Since the kernel doesn't use IBRS, this means a value of zero is what is needed in the host. But the 336996-Speculative-Execution-Side-Channel-Mitigations.pdf refers to the other bits as reserved so the kernel should respect the boot time SPEC_CTRL value and use that. This allows to deal with future extensions to the SPEC_CTRL interface if any at all. Note: This uses wrmsrl() instead of native_wrmsl(). I does not make any difference as paravirt will over-write the callq *0xfff.. with the wrmsrl assembler code. Signed-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) The 336996-Speculative-Execution-Side-Channel-Mitigations.pdf refers to all the other bits as reserved. The Intel SDM glossary defines reserved as implementation specific - aka unknown. As such at bootup this must be taken it into account and proper masking for the bits in use applied. A copy of this document is available at https://bugzilla.kernel.org/show_bug.cgi?id=199511 [ tglx: Made x86_spec_ctrl_base __ro_after_init ] Suggested-by:
Jon Masters <jcm@redhat.com> Signed-off-by:
-
Kees Cook authored
CVE-2018-3639 (x86) One of the easiest ways to protect the kernel from attack is to reduce the internal attack surface exposed when a "write" flaw is available. By making as much of the kernel read-only as possible, we reduce the attack surface. Many things are written to only during __init, and never changed again. These cannot be made "const" since the compiler will do the wrong thing (we do actually need to write to them). Instead, move these items into a memory region that will be made read-only during mark_rodata_ro() which happens after all kernel __init code has finished. This introduces __ro_after_init as a way to mark such memory, and adds some documentation about the existing __read_mostly marking. This improves the security of the Linux kernel by marking formerly read-write memory regions as read-only on a fully booted up system. Based on work by PaX Team and Brad Spengler. Signed-off-by:
Kees Cook <keescook@chromium.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brad Spengler <spender@grsecurity.net> Cc: Brian Gerst <brgerst@gmail.com> Cc: David Brown <david.brown@linaro.org> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Emese Revfy <re.emese@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mathias Krause <minipli@googlemail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: PaX Team <pageexec@freemail.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: kernel-hardening@lists.openwall.com Cc: linux-arch <linux-arch@vger.kernel.org> Link: http://lkml.kernel.org/r/1455748879-21872-5-git-send-email-keescook@chromium.orgSigned-off-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) Those SysFS functions have a similar preamble, as such make common code to handle them. Suggested-by:
-
Konrad Rzeszutek Wilk authored
CVE-2018-3639 (x86) Combine the various logic which goes through all those x86_cpu_id matching structures in one function. Suggested-by:
-
Linus Torvalds authored
CVE-2018-3639 (x86) The macro is not type safe and I did look for why that "g" constraint for the asm doesn't work: it's because the asm is more fundamentally wrong. It does movl %[val], %%eax but "val" isn't a 32-bit value, so then gcc will pass it in a register, and generate code like movl %rsi, %eax and gas will complain about a nonsensical 'mov' instruction (it's moving a 64-bit register to a 32-bit one). Passing it through memory will just hide the real bug - gcc still thinks the memory location is 64-bit, but the "movl" will only load the first 32 bits and it all happens to work because x86 is little-endian. Convert it to a type safe inline function with a little trick which hands the feature into the ALTERNATIVE macro. Signed-off-by:Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
-
Stefan Bader authored
CVE-2018-3639 (x86) This is a partial backport of dd84441a "x86/speculation: Use IBRS if available before calling into firmware" as later patches rely on the call. Signed-off-by:
-
Juerg Haefliger authored
CVE-2018-3639 (x86) Now that we have generic, vendor-agnostic support of IBPB/IBRS feature detection in common code, move the code to enable/disable it from the vendor-specifc init_<vendor> functions to the common code. Except for the AMD special case where we need to write an MSR on every CPU. Keep that in init_amd() which runs on every CPU, whereas the common code mentioned above only runs once when CPU 0 is being onlined. Signed-off-by: -
David Woodhouse authored
CVE-2018-3639 (x86) (cherry picked from commit 7fcae111) Despite the fact that all the other code there seems to be doing it, just using set_cpu_cap() in early_intel_init() doesn't actually work. For CPUs with PKU support, setup_pku() calls get_cpu_cap() after c->c_init() has set those feature bits. That resets those bits back to what was queried from the hardware. Turning the bits off for bad microcode is easy to fix. That can just use setup_clear_cpu_cap() to force them off for all CPUs. I was less keen on forcing the feature bits *on* that way, just in case of inconsistencies. I appreciate that the kernel is going to get this utterly wrong if CPU features are not consistent, because it has already applied alternatives by the time secondary CPUs are brought up. But at least if setup_force_cpu_cap() isn't being used, we might have a chance of *detecting* the lack of the corresponding bit and either panicking or refusing to bring the offending CPU online. So ensure that the appropriate feature bits are set within get_cpu_cap() regardless of how many extra times it's called. Fixes: 2961298e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags") Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> (cherry picked from commit cda6b607 linux-4.9.y) Signed-off-by:
-
David Woodhouse authored
CVE-2018-3639 (x86) (cherry picked from commit 2961298e) We want to expose the hardware features simply in /proc/cpuinfo as "ibrs", "ibpb" and "stibp". Since AMD has separate CPUID bits for those, use them as the user-visible bits. When the Intel SPEC_CTRL bit is set which indicates both IBRS and IBPB capability, set those (AMD) bits accordingly. Likewise if the Intel STIBP bit is set, set the AMD STIBP that's used for the generic hardware capability. Hide the rest from /proc/cpuinfo by putting "" in the comments. Including RETPOLINE and RETPOLINE_AMD which shouldn't be visible there. There are patches to make the sysfs vulnerabilities information non-readable by non-root, and the same should apply to all information about which mitigations are actually in use. Those *shouldn't* appear in /proc/cpuinfo. The feature bit for whether IBPB is actually used, which is needed for ALTERNATIVEs, is renamed to X86_FEATURE_USE_IBPB. Originally-by:
-
Peter Zijlstra authored
CVE-2018-3639 (x86) commit ea00f301 upstream. Joe Konno reported a compile failure resulting from using an MSR without inclusion of <asm/msr-index.h>, and while the current code builds fine (by accident) this needs fixing for future patches. Reported-by:
Joe Konno <joe.konno@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arjan@linux.intel.com Cc: bp@alien8.de Cc: dan.j.williams@intel.com Cc: dave.hansen@linux.intel.com Cc: dwmw2@infradead.org Cc: dwmw@amazon.co.uk Cc: gregkh@linuxfoundation.org Cc: hpa@zytor.com Cc: jpoimboe@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: luto@kernel.org Fixes: 20ffa1ca ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support") Link: http://lkml.kernel.org/r/20180213132819.GJ25201@hirez.programming.kicks-ass.netSigned-off-by:
-
David Woodhouse authored
CVE-2018-3639 (x86) (cherry picked from commit 20ffa1ca) Expose indirect_branch_prediction_barrier() for use in subsequent patches. [ tglx: Add IBPB status to spectre_v2 sysfs file ] Co-developed-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
-
David Woodhouse authored
CVE-2018-3639 (x86) (cherry picked from commit a5b29663) This doesn't refuse to load the affected microcodes; it just refuses to use the Spectre v2 mitigation features if they're detected, by clearing the appropriate feature bits. The AMD CPUID bits are handled here too, because hypervisors *may* have been exposing those bits even on Intel chips, for fine-grained control of what's available. It is non-trivial to use x86_match_cpu() for this table because that doesn't handle steppings. And the approach taken in commit bd9240a1 almost made me lose my lunch. Signed-off-by:
-
David Woodhouse authored
CVE-2018-3639 (x86) (cherry picked from commit fec9434a) Also, for CPUs which don't speculate at all, don't report that they're vulnerable to the Spectre variants either. Leave the cpu_no_meltdown[] match table with just X86_VENDOR_AMD in it for now, even though that could be done with a simple comparison, on the assumption that we'll have more to add. Based on suggestions from Dave Hansen and Alan Cox. Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: ak@linux.intel.com Cc: ashok.raj@intel.com Cc: karahmed@amazon.de Cc: arjan@linux.intel.com Cc: torvalds@linux-foundation.org Cc: peterz@infradead.org Cc: bp@alien8.de Cc: pbonzini@redhat.com Cc: tim.c.chen@linux.intel.com Cc: gregkh@linux-foundation.org Link: https://lkml.kernel.org/r/1516896855-7642-6-git-send-email-dwmw@amazon.co.ukSigned-off-by:
-
Juerg Haefliger authored
CVE-2018-3639 (x86) With the previous commit 50d36d375b89 ("x86/msr: Add definitions for new speculation control MSRs") the spec control bits from upstream were introduced, so rename the existing bits to match upstream: FEATURE_ENABLE_IBRS -> SPEC_CTRL_IBRS FEATURE_SET_IBPB -> PRED_CMD_IBPB Signed-off-by: -
David Woodhouse authored
CVE-2018-3639 (x86) Add MSR and bit definitions for SPEC_CTRL, PRED_CMD and ARCH_CAPABILITIES. See Intel's 336996-Speculative-Execution-Side-Channel-Mitigations.pdf Signed-off-by:
-
David Woodhouse authored
CVE-2018-3639 (x86) AMD exposes the PRED_CMD/SPEC_CTRL MSRs slightly differently to Intel. See http://lkml.kernel.org/r/2b3e25cc-286d-8bd0-aeaf-9ac4aae39de8@amd.comSigned-off-by:
-
Juerg Haefliger authored
CVE-2018-3639 (x86) The SPEC_CTRL featured moved from the scattered list to a leaf, so expose it to the guest from the leaf rather than the scattered list. Signed-off-by: -
David Woodhouse authored
CVE-2018-3639 (x86) Add three feature bits exposed by new microcode on Intel CPUs for speculation control. Signed-off-by:
-
David Woodhouse authored
CVE-2018-3639 (x86) This is a pure feature bits leaf. Three feature bits from this leaf are going to be added for speculation control features. Signed-off-by:
-
Andy Lutomirski authored
CVE-2018-3639 (x86) A typo (or mis-merge?) resulted in leaf 6 only being probed if cpuid_level >= 7. Fixes: 2ccd71f1 ("x86/cpufeature: Move some of the scattered feature bits to x86_capability") Signed-off-by:
Andy Lutomirski <luto@kernel.org> Acked-by:
Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Link: http://lkml.kernel.org/r/6ea30c0e9daec21e488b54761881a6dfcf3e04d0.1481825597.git.luto@kernel.orgSigned-off-by:
-
Borislav Petkov authored
CVE-2018-3639 (x86) Add an enum for the ->x86_capability array indices and cleanup get_cpu_cap() by killing some redundant local vars. Signed-off-by:
-
Borislav Petkov authored
CVE-2018-3639 (x86) Turn the CPUID leafs which are proper CPUID feature bit leafs into separate ->x86_capability words. Signed-off-by:
-
Juerg Haefliger authored
CVE-2018-3639 (x86) Internally, kernel 4.4 uses the term KAISER instead of PTI, so drop X86_FEATURE_PTI (since X86_FEATURE_KAISER exists) and also rename DISABLE_PTI. Fixes: b2f8503b ("x86/cpufeatures: Add X86_BUG_CPU_INSECURE") Signed-off-by:
-
Juerg Haefliger authored
CVE-2018-3639 (x86) There's no Documentation/admin-guide/ in 4.4 ... Fixes: df043b74 ("x86/spec_ctrl: Add sysctl knobs to enable/disable SPEC_CTRL feature") Signed-off-by:
-
Juerg Haefliger authored
CVE-2018-3639 (x86) Remove definitions of trivial functions that are not used externally. Introduce #defines for the bits for better readability. No functional changes. Signed-off-by:
-
- 15 May, 2018 1 commit
-
-
Juerg Haefliger authored
Ignore: yes Signed-off-by:
-
- 09 May, 2018 3 commits
-
-
Stefan Bader authored
Signed-off-by: -
Thadeu Lima de Souza Cascardo authored
Function bpf_fill_maxinsns11 is designed to not be able to be JITed on x86_64. So, it fails when CONFIG_BPF_JIT_ALWAYS_ON=y, and commit 09584b40 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y") makes sure that failure is detected on that case. However, it does not fail on other architectures, which have a different JIT compiler design. So, test_bpf has started to fail to load on those. After this fix, test_bpf loads fine on both x86_64 and ppc64el. Fixes: 09584b40 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y") Signed-off-by:
Thadeu Lima de Souza Cascardo <cascardo@canonical.com> Reviewed-by:
Yonghong Song <yhs@fb.com> Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> BugLink: https://bugs.launchpad.net/bugs/1765698 (cherry-picked from commit 52fda36d) Signed-off-by:
Colin King <colin.king@canonical.com> Acked-by:
Kleber Sacilotto de Souza <kleber.souza@canonical.com> Signed-off-by:
-
Yonghong Song authored
With CONFIG_BPF_JIT_ALWAYS_ON is defined in the config file, tools/testing/selftests/bpf/test_kmod.sh failed like below: [root@localhost bpf]# ./test_kmod.sh sysctl: setting key "net.core.bpf_jit_enable": Invalid argument [ JIT enabled:0 hardened:0 ] [ 132.175681] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096 [ 132.458834] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed] [ JIT enabled:1 hardened:0 ] [ 133.456025] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096 [ 133.730935] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed] [ JIT enabled:1 hardened:1 ] [ 134.769730] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096 [ 135.050864] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed] [ JIT enabled:1 hardened:2 ] [ 136.442882] test_bpf: #297 BPF_MAXINSNS: Jump, gap, jump, ... FAIL to prog_create err=-524 len=4096 [ 136.821810] test_bpf: Summary: 348 PASSED, 1 FAILED, [340/340 JIT'ed] [root@localhost bpf]# The test_kmod.sh load/remove test_bpf.ko multiple times with different settings for sysctl net.core.bpf_jit_{enable,harden}. The failed test #297 of test_bpf.ko is designed such that JIT always fails. Commit 290af866 (bpf: introduce BPF_JIT_ALWAYS_ON config) introduced the following tightening logic: ... if (!bpf_prog_is_dev_bound(fp->aux)) { fp = bpf_int_jit_compile(fp); #ifdef CONFIG_BPF_JIT_ALWAYS_ON if (!fp->jited) { *err = -ENOTSUPP; return fp; } #endif ... With this logic, Test #297 always gets return value -ENOTSUPP when CONFIG_BPF_JIT_ALWAYS_ON is defined, causing the test failure. This patch fixed the failure by marking Test #297 as expected failure when CONFIG_BPF_JIT_ALWAYS_ON is defined. Fixes: 290af866 (bpf: introduce BPF_JIT_ALWAYS_ON config) Signed-off-by:
-
