1. 14 Jun, 2018 4 commits
    • Linus Torvalds's avatar
      Merge tag 'pwm/for-4.18-rc1' of... · 4b4bb99b
      Linus Torvalds authored
      Merge tag 'pwm/for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
      
      Pull pwm updates from Thierry Reding:
       "This contains a couple of fixes and cleanups for the Meson and
        ACPI/LPSS drivers as well as capture support for STM32.
      
        Note that given the cross- subsystem changes, the STM32 patches were
        merged through the MFD and PWM trees, both sharing an immutable
        branch"
      
      * tag 'pwm/for-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
        pwm: stm32: Fix build warning with CONFIG_DMA_ENGINE disabled
        pwm: stm32: Enforce dependency on CONFIG_MFD_STM32_TIMERS
        ACPI / LPSS: Add missing prv_offset setting for byt/cht PWM devices
        pwm: lpss: platform: Save/restore the ctrl register over a suspend/resume
        dt-bindings: mfd: stm32-timers: Add support for dmas
        pwm: simplify getting .drvdata
        pwm: meson: Fix allocation of PWM channel array
      4b4bb99b
    • Linus Torvalds's avatar
      Merge branch 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux · 9bca19a0
      Linus Torvalds authored
      Pull i2c updates from Wolfram Sang:
      
       - mainly feature additions to drivers (stm32f7, qup, xlp9xx, mlxcpld, ...)
      
       - conversion to use the i2c_8bit_addr_from_msg macro consistently
      
       - move includes to platform_data
      
       - core updates to allow the (still in review) I3C subsystem to connect
      
       - and the regular share of smaller driver updates
      
      * 'i2c/for-4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (68 commits)
        i2c: qup: fix building without CONFIG_ACPI
        i2c: tegra: Remove suspend-resume
        i2c: imx-lpi2c: Switch to SPDX identifier
        i2c: mxs: Switch to SPDX identifier
        i2c: busses: make use of i2c_8bit_addr_from_msg
        i2c: algos: make use of i2c_8bit_addr_from_msg
        i2c: rcar: document R8A77980 bindings
        i2c: qup: Add command-line parameter to override SCL frequency
        i2c: qup: Correct duty cycle for FM and FM+
        i2c: qup: Add support for Fast Mode Plus
        i2c: qup: add probe path for Centriq ACPI devices
        i2c: robotfuzz-osif: drop pointless test
        i2c: robotfuzz-osif: remove pointless local variable
        i2c: rk3x: Don't print visible virtual mapping MMIO address
        i2c: opal: don't check number of messages in the driver
        i2c: ibm_iic: don't check number of messages in the driver
        i2c: imx: Switch to SPDX identifier
        i2c: mux: pca954x: merge calls to of_match_device and of_device_get_match_data
        i2c: mux: demux-pinctrl: use proper parent device for demux adapter
        i2c: mux: improve error message for failed symlink
        ...
      9bca19a0
    • Linus Torvalds's avatar
      Merge tag 'apparmor-pr-2018-06-13' of... · 463f2021
      Linus Torvalds authored
      Merge tag 'apparmor-pr-2018-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor
      
      Pull AppArmor updates from John Johansen:
       "Features
         - add support for mapping secids and using secctxes
         - add the ability to get a task's secid
         - add support for audit rule filtering
      
        Cleanups:
         - multiple typo fixes
         - Convert to use match_string() helper
         - update git and wiki locations in AppArmor docs
         - improve get_buffers macro by using get_cpu_ptr
         - Use an IDR to allocate apparmor secids
      
        Bug fixes:
         - fix '*seclen' is never less than zero
         - fix mediation of prlimit
         - fix memory leak when deduping profile load
         - fix ptrace read check
         - fix memory leak of rule on error exit path"
      
      * tag 'apparmor-pr-2018-06-13' of git://git.kernel.org/pub/scm/linux/kernel/git/jj/linux-apparmor: (21 commits)
        apparmor: fix ptrace read check
        apparmor: fix memory leak when deduping profile load
        apparmor: fix mediation of prlimit
        apparmor: fixup secid map conversion to using IDR
        apparmor: Use an IDR to allocate apparmor secids
        apparmor: Fix memory leak of rule on error exit path
        apparmor: modify audit rule support to support profile stacks
        apparmor: Add support for audit rule filtering
        apparmor: update git and wiki locations in AppArmor docs
        apparmor: Convert to use match_string() helper
        apparmor: improve get_buffers macro by using get_cpu_ptr
        apparmor: fix '*seclen' is never less than zero
        apparmor: fix typo "preconfinement"
        apparmor: fix typo "independent"
        apparmor: fix typo "traverse"
        apparmor: fix typo "type"
        apparmor: fix typo "replace"
        apparmor: fix typo "comparison"
        apparmor: fix typo "loosen"
        apparmor: add the ability to get a task's secid
        ...
      463f2021
    • Linus Torvalds's avatar
      Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables · 050e9baa
      Linus Torvalds authored
      The changes to automatically test for working stack protector compiler
      support in the Kconfig files removed the special STACKPROTECTOR_AUTO
      option that picked the strongest stack protector that the compiler
      supported.
      
      That was all a nice cleanup - it makes no sense to have the AUTO case
      now that the Kconfig phase can just determine the compiler support
      directly.
      
      HOWEVER.
      
      It also meant that doing "make oldconfig" would now _disable_ the strong
      stackprotector if you had AUTO enabled, because in a legacy config file,
      the sane stack protector configuration would look like
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        # CONFIG_CC_STACKPROTECTOR_NONE is not set
        # CONFIG_CC_STACKPROTECTOR_REGULAR is not set
        # CONFIG_CC_STACKPROTECTOR_STRONG is not set
        CONFIG_CC_STACKPROTECTOR_AUTO=y
      
      and when you ran this through "make oldconfig" with the Kbuild changes,
      it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had
      been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just
      CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version
      used to be disabled (because it was really enabled by AUTO), and would
      disable it in the new config, resulting in:
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
        CONFIG_CC_STACKPROTECTOR=y
        # CONFIG_CC_STACKPROTECTOR_STRONG is not set
        CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
      
      That's dangerously subtle - people could suddenly find themselves with
      the weaker stack protector setup without even realizing.
      
      The solution here is to just rename not just the old RECULAR stack
      protector option, but also the strong one.  This does that by just
      removing the CC_ prefix entirely for the user choices, because it really
      is not about the compiler support (the compiler support now instead
      automatially impacts _visibility_ of the options to users).
      
      This results in "make oldconfig" actually asking the user for their
      choice, so that we don't have any silent subtle security model changes.
      The end result would generally look like this:
      
        CONFIG_HAVE_CC_STACKPROTECTOR=y
        CONFIG_CC_HAS_STACKPROTECTOR_NONE=y
        CONFIG_STACKPROTECTOR=y
        CONFIG_STACKPROTECTOR_STRONG=y
        CONFIG_CC_HAS_SANE_STACKPROTECTOR=y
      
      where the "CC_" versions really are about internal compiler
      infrastructure, not the user selections.
      Acked-by: default avatarMasahiro Yamada <yamada.masahiro@socionext.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      050e9baa
  2. 13 Jun, 2018 10 commits
    • Linus Torvalds's avatar
      Merge tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild · be779f03
      Linus Torvalds authored
      Pull more Kbuild updates from Masahiro Yamada:
      
       - fix some bugs introduced by the recent Kconfig syntax extension
      
       - add some symbols about compiler information in Kconfig, such as
         CC_IS_GCC, CC_IS_CLANG, GCC_VERSION, etc.
      
       - test compiler capability for the stack protector in Kconfig, and
         clean-up Makefile
      
       - test compiler capability for GCC-plugins in Kconfig, and clean-up
         Makefile
      
       - allow to enable GCC-plugins for COMPILE_TEST
      
       - test compiler capability for KCOV in Kconfig and correct dependency
      
       - remove auto-detect mode of the GCOV format, which is now more nicely
         handled in Kconfig
      
       - test compiler capability for mprofile-kernel on PowerPC, and clean-up
         Makefile
      
       - misc cleanups
      
      * tag 'kbuild-v4.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
        linux/linkage.h: replace VMLINUX_SYMBOL_STR() with __stringify()
        kconfig: fix localmodconfig
        sh: remove no-op macro VMLINUX_SYMBOL()
        powerpc/kbuild: move -mprofile-kernel check to Kconfig
        Documentation: kconfig: add recommended way to describe compiler support
        gcc-plugins: disable GCC_PLUGIN_STRUCTLEAK_BYREF_ALL for COMPILE_TEST
        gcc-plugins: allow to enable GCC_PLUGINS for COMPILE_TEST
        gcc-plugins: test plugin support in Kconfig and clean up Makefile
        gcc-plugins: move GCC version check for PowerPC to Kconfig
        kcov: test compiler capability in Kconfig and correct dependency
        gcov: remove CONFIG_GCOV_FORMAT_AUTODETECT
        arm64: move GCC version check for ARCH_SUPPORTS_INT128 to Kconfig
        kconfig: add CC_IS_CLANG and CLANG_VERSION
        kconfig: add CC_IS_GCC and GCC_VERSION
        stack-protector: test compiler capability in Kconfig and drop AUTO mode
        kbuild: fix endless syncconfig in case arch Makefile sets CROSS_COMPILE
      be779f03
    • Linus Torvalds's avatar
      Merge tag 'acpi-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · d290ef93
      Linus Torvalds authored
      Pull additional ACPI updates from Rafael Wysocki:
       "These update the ACPICA code in the kernel to upstream revision
        20180531 including one important AML parser fix and updates related to
        the IORT table, make the kernel recognize the "Windows 2017.2" _OSI
        string and update the customized methods documentation.
      
        Specifics:
      
         - Update the ACPICA code in the kernel to upstream revision 20180531
           including:
            * AML parser fix to continue loading tables after detecting an AML
              error (Erik Schmauss).
            * AML parser debug option to dump parse trees (Bob Moore).
            * Debugger updates (Bob Moore).
            * Initial bits of Unload () operator deprecation (Bob Moore).
            * Updates related to the IORT table (Robin Murphy).
      
         - Make Linux respond to the "Windows 2017.2" _OSI string which
           allows native Thunderbolt enumeration to be used on Dell systems
           and was unsafe before recent changes in the PCI subsystem (Mario
           Limonciello)
      
         - Update the ACPI method customization feature documentation (Erik
           Schmauss)"
      
      * tag 'acpi-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        ACPICA: Recognize the _OSI string "Windows 2017.2"
        ACPICA: Update version to 20180531
        ACPICA: Interpreter: Begin deprecation of Unload operator
        ACPICA: AML parser: attempt to continue loading table after error
        ACPICA: Debugger: Reduce verbosity for module-level code errors.
        ACPICA: AML Parser: Add debug option to dump parse trees
        ACPICA: Debugger: Add count of namespace nodes after namespace dump
        ACPICA: IORT: Add PMCG node supprt
        ACPICA: IORT: Update for revision D
        ACPI / Documentation: update ACPI customize method feature docs
      d290ef93
    • Linus Torvalds's avatar
      Merge tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · d09fcecb
      Linus Torvalds authored
      Pull more power management updates from Rafael Wysocki:
       "These revert a recent PM core change that introduced a regression, fix
        the build when the recently added Kryo cpufreq driver is selected, add
        support for devices attached to multiple power domains to the generic
        power domains (genpd) framework, add support for iowait boosting on
        systens with hardware-managed P-states (HWP) enabled to the
        intel_pstate driver, modify the behavior of the wakeup_count device
        attribute in sysfs, fix a few issues and clean up some ugliness,
        mostly in cpufreq (core and drivers) and in the cpupower utility.
      
        Specifics:
      
         - Revert a recent PM core change that attempted to fix an issue
           related to device links, but introduced a regression (Rafael
           Wysocki)
      
         - Fix build when the recently added cpufreq driver for Kryo
           processors is selected by making it possible to build that driver
           as a module (Arnd Bergmann)
      
         - Fix the long idle detection mechanism in the out-of-band (ondemand
           and conservative) cpufreq governors (Chen Yu)
      
         - Add support for devices in multiple power domains to the generic
           power domains (genpd) framework (Ulf Hansson)
      
         - Add support for iowait boosting on systems with hardware-managed
           P-states (HWP) enabled to the intel_pstate driver and make it use
           that feature on systems with Skylake Xeon processors as it is
           reported to improve performance significantly on those systems
           (Srinivas Pandruvada)
      
         - Fix and update the acpi_cpufreq, ti-cpufreq and imx6q cpufreq
           drivers (Colin Ian King, Suman Anna, Sébastien Szymanski)
      
         - Change the behavior of the wakeup_count device attribute in sysfs
           to expose the number of events when the device might have aborted
           system suspend in progress (Ravi Chandra Sadineni)
      
         - Fix two minor issues in the cpupower utility (Abhishek Goel, Colin
           Ian King)"
      
      * tag 'pm-4.18-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
        Revert "PM / runtime: Fixup reference counting of device link suppliers at probe"
        cpufreq: imx6q: check speed grades for i.MX6ULL
        cpufreq: governors: Fix long idle detection logic in load calculation
        cpufreq: intel_pstate: enable boost for Skylake Xeon
        PM / wakeup: Export wakeup_count instead of event_count via sysfs
        PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
        PM / Domains: Add support for multi PM domains per device to genpd
        PM / Domains: Split genpd_dev_pm_attach()
        PM / Domains: Don't attach devices in genpd with multi PM domains
        PM / Domains: dt: Allow power-domain property to be a list of specifiers
        cpufreq: intel_pstate: New sysfs entry to control HWP boost
        cpufreq: intel_pstate: HWP boost performance on IO wakeup
        cpufreq: intel_pstate: Add HWP boost utility and sched util hooks
        cpufreq: ti-cpufreq: Use devres managed API in probe()
        cpufreq: ti-cpufreq: Fix an incorrect error return value
        cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static
        cpufreq: kryo: allow building as a loadable module
        cpupower : Fix header name to read idle state name
        cpupower: fix spelling mistake: "logilename" -> "logfilename"
      d09fcecb
    • Rafael J. Wysocki's avatar
      Merge branch 'acpica' · 67445532
      Rafael J. Wysocki authored
      ACPICA update to upstream revision 20180531 (including an important
      AML parser fix and updates related to IORT) and a change to start
      responding to the "Windows 2017.2" _OSI string.
      
      * acpica:
        ACPICA: Recognize the _OSI string "Windows 2017.2"
        ACPICA: Update version to 20180531
        ACPICA: Interpreter: Begin deprecation of Unload operator
        ACPICA: AML parser: attempt to continue loading table after error
        ACPICA: Debugger: Reduce verbosity for module-level code errors.
        ACPICA: AML Parser: Add debug option to dump parse trees
        ACPICA: Debugger: Add count of namespace nodes after namespace dump
        ACPICA: IORT: Add PMCG node supprt
        ACPICA: IORT: Update for revision D
      67445532
    • Rafael J. Wysocki's avatar
      Merge branches 'pm-domains' and 'pm-tools' · 6a900f88
      Rafael J. Wysocki authored
      Additional updates of the generic power domains (genpd) framework
      (support for devices attached to multiple domains) and the cpupower
      utility (minor fixes) for 4.18-rc1.
      
      * pm-domains:
        PM / Domains: Add dev_pm_domain_attach_by_id() to manage multi PM domains
        PM / Domains: Add support for multi PM domains per device to genpd
        PM / Domains: Split genpd_dev_pm_attach()
        PM / Domains: Don't attach devices in genpd with multi PM domains
        PM / Domains: dt: Allow power-domain property to be a list of specifiers
      
      * pm-tools:
        cpupower : Fix header name to read idle state name
        cpupower: fix spelling mistake: "logilename" -> "logfilename"
      6a900f88
    • Rafael J. Wysocki's avatar
      Merge branch 'pm-cpufreq' · 2652df3a
      Rafael J. Wysocki authored
      Additional cpufreq updates for 4.18-rc1: fixes and cleanups in the
      core and drivers and intel_pstate extension to do iowait boosting
      on systems with HWP that improves performance quite a bit.
      
      * pm-cpufreq:
        cpufreq: imx6q: check speed grades for i.MX6ULL
        cpufreq: governors: Fix long idle detection logic in load calculation
        cpufreq: intel_pstate: enable boost for Skylake Xeon
        cpufreq: intel_pstate: New sysfs entry to control HWP boost
        cpufreq: intel_pstate: HWP boost performance on IO wakeup
        cpufreq: intel_pstate: Add HWP boost utility and sched util hooks
        cpufreq: ti-cpufreq: Use devres managed API in probe()
        cpufreq: ti-cpufreq: Fix an incorrect error return value
        cpufreq: ACPI: make function acpi_cpufreq_fast_switch() static
        cpufreq: kryo: allow building as a loadable module
      2652df3a
    • Linus Torvalds's avatar
      Revert "debugfs: inode: debugfs_create_dir uses mode permission from parent" · f5b7769e
      Linus Torvalds authored
      This reverts commit 95cde3c5.
      
      The commit had good intentions, but it breaks kvm-tool and qemu-kvm.
      
      With it in place, "lkvm run" just fails with
      
        Error: KVM_CREATE_VM ioctl
        Warning: Failed init: kvm__init
      
      which isn't a wonderful error message, but bisection pinpointed the
      problematic commit.
      
      The problem is almost certainly due to the special kvm debugfs entries
      created dynamically by kvm under /sys/kernel/debug/kvm/.  See
      kvm_create_vm_debugfs()
      Bisected-and-reported-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      Cc: Wanpeng Li <kernellwp@gmail.com>
      Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
      Cc: Thomas Richter <tmricht@linux.ibm.com>
      Cc: Kees Cook <keescook@chromium.org>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      f5b7769e
    • Linus Torvalds's avatar
      KVM: x86: VMX: fix build without hyper-v · dbee3d02
      Linus Torvalds authored
      Commit ceef7d10 ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap
      support") broke the build with Hyper-V disabled, because it accesses
      ms_hyperv.nested_features without checking if that exists.
      
      This is the quick-and-hacky build fix.
      
      I suspect the proper fix is to replace the
      
          static_branch_unlikely(&enable_evmcs)
      
      tests with an inline helper function that also checks that CONFIG_HYPERV
      is enabled, since without that, enable_evmcs makes no sense.
      
      But I want a working build environment first and foremost, and I'm upset
      this slipped through in the first place.  My primary build tests missed
      it because I tend to build with everything enabled, but it should have
      been caught in the kvm tree.
      
      Fixes: ceef7d10 ("KVM: x86: VMX: hyper-v: Enlightened MSR-Bitmap support")
      Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
      Cc: Paolo Bonzini <pbonzini@redhat.com>
      Signed-off-by: default avatarLinus Torvalds <torvalds@linux-foundation.org>
      dbee3d02
    • Linus Torvalds's avatar
      Merge tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux · b08fc527
      Linus Torvalds authored
      Pull more overflow updates from Kees Cook:
       "The rest of the overflow changes for v4.18-rc1.
      
        This includes the explicit overflow fixes from Silvio, further
        struct_size() conversions from Matthew, and a bug fix from Dan.
      
        But the bulk of it is the treewide conversions to use either the
        2-factor argument allocators (e.g. kmalloc(a * b, ...) into
        kmalloc_array(a, b, ...) or the array_size() macros (e.g. vmalloc(a *
        b) into vmalloc(array_size(a, b)).
      
        Coccinelle was fighting me on several fronts, so I've done a bunch of
        manual whitespace updates in the patches as well.
      
        Summary:
      
         - Error path bug fix for overflow tests (Dan)
      
         - Additional struct_size() conversions (Matthew, Kees)
      
         - Explicitly reported overflow fixes (Silvio, Kees)
      
         - Add missing kvcalloc() function (Kees)
      
         - Treewide conversions of allocators to use either 2-factor argument
           variant when available, or array_size() and array3_size() as needed
           (Kees)"
      
      * tag 'overflow-v4.18-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: (26 commits)
        treewide: Use array_size in f2fs_kvzalloc()
        treewide: Use array_size() in f2fs_kzalloc()
        treewide: Use array_size() in f2fs_kmalloc()
        treewide: Use array_size() in sock_kmalloc()
        treewide: Use array_size() in kvzalloc_node()
        treewide: Use array_size() in vzalloc_node()
        treewide: Use array_size() in vzalloc()
        treewide: Use array_size() in vmalloc()
        treewide: devm_kzalloc() -> devm_kcalloc()
        treewide: devm_kmalloc() -> devm_kmalloc_array()
        treewide: kvzalloc() -> kvcalloc()
        treewide: kvmalloc() -> kvmalloc_array()
        treewide: kzalloc_node() -> kcalloc_node()
        treewide: kzalloc() -> kcalloc()
        treewide: kmalloc() -> kmalloc_array()
        mm: Introduce kvcalloc()
        video: uvesafb: Fix integer overflow in allocation
        UBIFS: Fix potential integer overflow in allocation
        leds: Use struct_size() in allocation
        Convert intel uncore to struct_size
        ...
      b08fc527
    • Linus Torvalds's avatar
      Merge tag 'for-4.18/dm-changes-v2' of... · 4597fcff
      Linus Torvalds authored
      Merge tag 'for-4.18/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
      
      Pull device mapper updates from Mike Snitzer:
      
       - Adjust various DM structure members to improve alignment relative to
         4.18 block's mempool_t and bioset changes.
      
       - Add DM writecache target that offers writeback caching to persistent
         memory or SSD.
      
       - Small DM core error message change to give context for why a DM table
         type transition wasn't allowed.
      
      * tag 'for-4.18/dm-changes-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
        dm: add writecache target
        dm: adjust structure members to improve alignment
        dm: report which conflicting type caused error during table_load()
      4597fcff
  3. 12 Jun, 2018 26 commits
    • Kees Cook's avatar
      treewide: Use array_size in f2fs_kvzalloc() · 9d2a789c
      Kees Cook authored
      The f2fs_kvzalloc() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              f2fs_kvzalloc(handle, a * b, gfp)
      
      with:
              f2fs_kvzalloc(handle, array_size(a, b), gfp)
      
      as well as handling cases of:
      
              f2fs_kvzalloc(handle, a * b * c, gfp)
      
      with:
      
              f2fs_kvzalloc(handle, array3_size(a, b, c), gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              f2fs_kvzalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
        f2fs_kvzalloc(HANDLE,
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        f2fs_kvzalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        f2fs_kvzalloc(HANDLE, C1 * C2 * C3, ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression HANDLE;
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        f2fs_kvzalloc(HANDLE, C1 * C2, ...)
      |
        f2fs_kvzalloc(HANDLE,
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      9d2a789c
    • Kees Cook's avatar
      treewide: Use array_size() in f2fs_kzalloc() · 026f0507
      Kees Cook authored
      The f2fs_kzalloc() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              f2fs_kzalloc(handle, a * b, gfp)
      
      with:
              f2fs_kzalloc(handle, array_size(a, b), gfp)
      
      as well as handling cases of:
      
              f2fs_kzalloc(handle, a * b * c, gfp)
      
      with:
      
              f2fs_kzalloc(handle, array3_size(a, b, c), gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              f2fs_kzalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
        f2fs_kzalloc(HANDLE,
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        f2fs_kzalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kzalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        f2fs_kzalloc(HANDLE, C1 * C2 * C3, ...)
      |
        f2fs_kzalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression HANDLE;
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        f2fs_kzalloc(HANDLE, C1 * C2, ...)
      |
        f2fs_kzalloc(HANDLE,
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      026f0507
    • Kees Cook's avatar
      treewide: Use array_size() in f2fs_kmalloc() · c8606593
      Kees Cook authored
      The f2fs_kmalloc() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              f2fs_kmalloc(handle, a * b, gfp)
      
      with:
              f2fs_kmalloc(handle, array_size(a, b), gfp)
      
      as well as handling cases of:
      
              f2fs_kmalloc(handle, a * b * c, gfp)
      
      with:
      
              f2fs_kmalloc(handle, array3_size(a, b, c), gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              f2fs_kmalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
        f2fs_kmalloc(HANDLE,
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        f2fs_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        f2fs_kmalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        f2fs_kmalloc(HANDLE, C1 * C2 * C3, ...)
      |
        f2fs_kmalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression HANDLE;
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        f2fs_kmalloc(HANDLE, C1 * C2, ...)
      |
        f2fs_kmalloc(HANDLE,
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      c8606593
    • Kees Cook's avatar
      treewide: Use array_size() in sock_kmalloc() · 76e43e37
      Kees Cook authored
      The sock_kmalloc() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              sock_kmalloc(handle, a * b, gfp)
      
      with:
              sock_kmalloc(handle, array_size(a, b), gfp)
      
      as well as handling cases of:
      
              sock_kmalloc(handle, a * b * c, gfp)
      
      with:
      
              sock_kmalloc(handle, array3_size(a, b, c), gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              sock_kmalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
        sock_kmalloc(HANDLE,
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        sock_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        sock_kmalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        sock_kmalloc(HANDLE, C1 * C2 * C3, ...)
      |
        sock_kmalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression HANDLE;
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        sock_kmalloc(HANDLE, C1 * C2, ...)
      |
        sock_kmalloc(HANDLE,
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      76e43e37
    • Kees Cook's avatar
      treewide: Use array_size() in kvzalloc_node() · 84ca176b
      Kees Cook authored
      The kvzalloc_node() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              kvzalloc_node(a * b, gfp, node)
      
      with:
              kvzalloc_node(array_size(a, b), gfp, node)
      
      as well as handling cases of:
      
              kvzalloc_node(a * b * c, gfp, node)
      
      with:
      
              kvzalloc_node(array3_size(a, b, c), gfp, node)
      
      This does, however, attempt to ignore constant size factors like:
      
              kvzalloc_node(4 * 1024, gfp, node)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kvzalloc_node(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kvzalloc_node(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kvzalloc_node(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc_node(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        kvzalloc_node(
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
        kvzalloc_node(
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kvzalloc_node(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kvzalloc_node(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kvzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kvzalloc_node(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc_node(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kvzalloc_node(C1 * C2 * C3, ...)
      |
        kvzalloc_node(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        kvzalloc_node(C1 * C2, ...)
      |
        kvzalloc_node(
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      84ca176b
    • Kees Cook's avatar
      treewide: Use array_size() in vzalloc_node() · fd7beced
      Kees Cook authored
      The vzalloc_node() function has no 2-factor argument form, so
      multiplication factors need to be wrapped in array_size(). This patch
      replaces cases of:
      
              vzalloc_node(a * b, node)
      
      with:
              vzalloc_node(array_size(a, b), node)
      
      as well as handling cases of:
      
              vzalloc_node(a * b * c, node)
      
      with:
      
              vzalloc_node(array3_size(a, b, c), node)
      
      This does, however, attempt to ignore constant size factors like:
      
              vzalloc_node(4 * 1024, node)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        vzalloc_node(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        vzalloc_node(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        vzalloc_node(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc_node(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        vzalloc_node(
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
        vzalloc_node(
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        vzalloc_node(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        vzalloc_node(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        vzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        vzalloc_node(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc_node(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        vzalloc_node(C1 * C2 * C3, ...)
      |
        vzalloc_node(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        vzalloc_node(C1 * C2, ...)
      |
        vzalloc_node(
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      fd7beced
    • Kees Cook's avatar
      treewide: Use array_size() in vzalloc() · fad953ce
      Kees Cook authored
      The vzalloc() function has no 2-factor argument form, so multiplication
      factors need to be wrapped in array_size(). This patch replaces cases of:
      
              vzalloc(a * b)
      
      with:
              vzalloc(array_size(a, b))
      
      as well as handling cases of:
      
              vzalloc(a * b * c)
      
      with:
      
              vzalloc(array3_size(a, b, c))
      
      This does, however, attempt to ignore constant size factors like:
      
              vzalloc(4 * 1024)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        vzalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        vzalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        vzalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        vzalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        vzalloc(
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
        vzalloc(
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        vzalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vzalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        vzalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vzalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vzalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        vzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        vzalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vzalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        vzalloc(C1 * C2 * C3, ...)
      |
        vzalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        vzalloc(C1 * C2, ...)
      |
        vzalloc(
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      fad953ce
    • Kees Cook's avatar
      treewide: Use array_size() in vmalloc() · 42bc47b3
      Kees Cook authored
      The vmalloc() function has no 2-factor argument form, so multiplication
      factors need to be wrapped in array_size(). This patch replaces cases of:
      
              vmalloc(a * b)
      
      with:
              vmalloc(array_size(a, b))
      
      as well as handling cases of:
      
              vmalloc(a * b * c)
      
      with:
      
              vmalloc(array3_size(a, b, c))
      
      This does, however, attempt to ignore constant size factors like:
      
              vmalloc(4 * 1024)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        vmalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        vmalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        vmalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        vmalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
        vmalloc(
      -	sizeof(TYPE) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * (COUNT_ID)
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * COUNT_ID
      +	array_size(COUNT_ID, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * (COUNT_CONST)
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * COUNT_CONST
      +	array_size(COUNT_CONST, sizeof(THING))
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
        vmalloc(
      -	SIZE * COUNT
      +	array_size(COUNT, SIZE)
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        vmalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        vmalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        vmalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        vmalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vmalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        vmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        vmalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        vmalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        vmalloc(C1 * C2 * C3, ...)
      |
        vmalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants.
      @@
      expression E1, E2;
      constant C1, C2;
      @@
      
      (
        vmalloc(C1 * C2, ...)
      |
        vmalloc(
      -	E1 * E2
      +	array_size(E1, E2)
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      42bc47b3
    • Kees Cook's avatar
      treewide: devm_kzalloc() -> devm_kcalloc() · a86854d0
      Kees Cook authored
      The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc().
      This patch replaces cases of:
      
              devm_kzalloc(handle, a * b, gfp)
      
      with:
              devm_kcalloc(handle, a * b, gfp)
      
      as well as handling cases of:
      
              devm_kzalloc(handle, a * b * c, gfp)
      
      with:
      
              devm_kzalloc(handle, array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              devm_kcalloc(handle, array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              devm_kzalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      Some manual whitespace fixes were needed in this patch, as Coccinelle
      really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...".
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        devm_kzalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
      |
        devm_kzalloc(HANDLE,
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kzalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression HANDLE;
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        devm_kzalloc(HANDLE, sizeof(THING) * C2, ...)
      |
        devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...)
      |
        devm_kzalloc(HANDLE, C1 * C2 * C3, ...)
      |
        devm_kzalloc(HANDLE, C1 * C2, ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - devm_kzalloc
      + devm_kcalloc
        (HANDLE,
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      a86854d0
    • Kees Cook's avatar
      treewide: devm_kmalloc() -> devm_kmalloc_array() · 3c4211ba
      Kees Cook authored
      The devm_kmalloc() function has a 2-factor argument form,
      devm_kmalloc_array(). This patch replaces cases of:
      
              devm_kmalloc(handle, a * b, gfp)
      
      with:
              devm_kmalloc_array(handle, a * b, gfp)
      
      as well as handling cases of:
      
              devm_kmalloc(handle, a * b * c, gfp)
      
      with:
      
              devm_kmalloc(handle, array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              devm_kmalloc_array(handle, array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              devm_kmalloc(handle, 4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      Some manual whitespace fixes were needed in this patch, as Coccinelle
      really liked to write "=devm_kmalloc..." instead of "= devm_kmalloc...".
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      expression HANDLE;
      type TYPE;
      expression THING, E;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression HANDLE;
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      expression HANDLE;
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      expression HANDLE;
      identifier SIZE, COUNT;
      @@
      
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression HANDLE;
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression HANDLE;
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      expression HANDLE;
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        devm_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression HANDLE;
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        devm_kmalloc(HANDLE, C1 * C2 * C3, ...)
      |
        devm_kmalloc(HANDLE,
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        devm_kmalloc(HANDLE,
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression HANDLE;
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        devm_kmalloc(HANDLE, sizeof(THING) * C2, ...)
      |
        devm_kmalloc(HANDLE, sizeof(TYPE) * C2, ...)
      |
        devm_kmalloc(HANDLE, C1 * C2 * C3, ...)
      |
        devm_kmalloc(HANDLE, C1 * C2, ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - devm_kmalloc
      + devm_kmalloc_array
        (HANDLE,
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      3c4211ba
    • Kees Cook's avatar
      treewide: kvzalloc() -> kvcalloc() · 778e1cdd
      Kees Cook authored
      The kvzalloc() function has a 2-factor argument form, kvcalloc(). This
      patch replaces cases of:
      
              kvzalloc(a * b, gfp)
      
      with:
              kvcalloc(a * b, gfp)
      
      as well as handling cases of:
      
              kvzalloc(a * b * c, gfp)
      
      with:
      
              kvzalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kvcalloc(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kvzalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kvzalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kvzalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kvzalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kvzalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kvzalloc
      + kvcalloc
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kvzalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kvzalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvzalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kvzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kvzalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvzalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kvzalloc(C1 * C2 * C3, ...)
      |
        kvzalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvzalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvzalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvzalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kvzalloc(sizeof(THING) * C2, ...)
      |
        kvzalloc(sizeof(TYPE) * C2, ...)
      |
        kvzalloc(C1 * C2 * C3, ...)
      |
        kvzalloc(C1 * C2, ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kvzalloc
      + kvcalloc
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      778e1cdd
    • Kees Cook's avatar
      treewide: kvmalloc() -> kvmalloc_array() · 344476e1
      Kees Cook authored
      The kvmalloc() function has a 2-factor argument form, kvmalloc_array(). This
      patch replaces cases of:
      
              kvmalloc(a * b, gfp)
      
      with:
              kvmalloc_array(a * b, gfp)
      
      as well as handling cases of:
      
              kvmalloc(a * b * c, gfp)
      
      with:
      
              kvmalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kvmalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kvmalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kvmalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kvmalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kvmalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kvmalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kvmalloc
      + kvmalloc_array
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kvmalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kvmalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvmalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kvmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kvmalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kvmalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kvmalloc(C1 * C2 * C3, ...)
      |
        kvmalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvmalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvmalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kvmalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kvmalloc(sizeof(THING) * C2, ...)
      |
        kvmalloc(sizeof(TYPE) * C2, ...)
      |
        kvmalloc(C1 * C2 * C3, ...)
      |
        kvmalloc(C1 * C2, ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kvmalloc
      + kvmalloc_array
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      344476e1
    • Kees Cook's avatar
      treewide: kzalloc_node() -> kcalloc_node() · 590b5b7d
      Kees Cook authored
      The kzalloc_node() function has a 2-factor argument form, kcalloc_node(). This
      patch replaces cases of:
      
              kzalloc_node(a * b, gfp, node)
      
      with:
              kcalloc_node(a * b, gfp, node)
      
      as well as handling cases of:
      
              kzalloc_node(a * b * c, gfp, node)
      
      with:
      
              kzalloc_node(array3_size(a, b, c), gfp, node)
      
      as it's slightly less ugly than:
      
              kcalloc_node(array_size(a, b), c, gfp, node)
      
      This does, however, attempt to ignore constant size factors like:
      
              kzalloc_node(4 * 1024, gfp, node)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kzalloc_node(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kzalloc_node(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kzalloc_node(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc_node(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kzalloc_node
      + kcalloc_node
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kzalloc_node(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kzalloc_node(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kzalloc_node(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kzalloc_node(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc_node(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc_node(C1 * C2 * C3, ...)
      |
        kzalloc_node(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc_node(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc_node(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc_node(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc_node(sizeof(THING) * C2, ...)
      |
        kzalloc_node(sizeof(TYPE) * C2, ...)
      |
        kzalloc_node(C1 * C2 * C3, ...)
      |
        kzalloc_node(C1 * C2, ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kzalloc_node
      + kcalloc_node
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      590b5b7d
    • Kees Cook's avatar
      treewide: kzalloc() -> kcalloc() · 6396bb22
      Kees Cook authored
      The kzalloc() function has a 2-factor argument form, kcalloc(). This
      patch replaces cases of:
      
              kzalloc(a * b, gfp)
      
      with:
              kcalloc(a * b, gfp)
      
      as well as handling cases of:
      
              kzalloc(a * b * c, gfp)
      
      with:
      
              kzalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kzalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kzalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kzalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kzalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kzalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kzalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kzalloc
      + kcalloc
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kzalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kzalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kzalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kzalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kzalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kzalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kzalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc(C1 * C2 * C3, ...)
      |
        kzalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kzalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kzalloc(sizeof(THING) * C2, ...)
      |
        kzalloc(sizeof(TYPE) * C2, ...)
      |
        kzalloc(C1 * C2 * C3, ...)
      |
        kzalloc(C1 * C2, ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kzalloc
      + kcalloc
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      6396bb22
    • Kees Cook's avatar
      treewide: kmalloc() -> kmalloc_array() · 6da2ec56
      Kees Cook authored
      The kmalloc() function has a 2-factor argument form, kmalloc_array(). This
      patch replaces cases of:
      
              kmalloc(a * b, gfp)
      
      with:
              kmalloc_array(a * b, gfp)
      
      as well as handling cases of:
      
              kmalloc(a * b * c, gfp)
      
      with:
      
              kmalloc(array3_size(a, b, c), gfp)
      
      as it's slightly less ugly than:
      
              kmalloc_array(array_size(a, b), c, gfp)
      
      This does, however, attempt to ignore constant size factors like:
      
              kmalloc(4 * 1024, gfp)
      
      though any constants defined via macros get caught up in the conversion.
      
      Any factors with a sizeof() of "unsigned char", "char", and "u8" were
      dropped, since they're redundant.
      
      The tools/ directory was manually excluded, since it has its own
      implementation of kmalloc().
      
      The Coccinelle script used for this was:
      
      // Fix redundant parens around sizeof().
      @@
      type TYPE;
      expression THING, E;
      @@
      
      (
        kmalloc(
      -	(sizeof(TYPE)) * E
      +	sizeof(TYPE) * E
        , ...)
      |
        kmalloc(
      -	(sizeof(THING)) * E
      +	sizeof(THING) * E
        , ...)
      )
      
      // Drop single-byte sizes and redundant parens.
      @@
      expression COUNT;
      typedef u8;
      typedef __u8;
      @@
      
      (
        kmalloc(
      -	sizeof(u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(__u8) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(char) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(unsigned char) * (COUNT)
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(u8) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(__u8) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(char) * COUNT
      +	COUNT
        , ...)
      |
        kmalloc(
      -	sizeof(unsigned char) * COUNT
      +	COUNT
        , ...)
      )
      
      // 2-factor product with sizeof(type/expression) and identifier or constant.
      @@
      type TYPE;
      expression THING;
      identifier COUNT_ID;
      constant COUNT_CONST;
      @@
      
      (
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_ID)
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * COUNT_ID
      +	COUNT_ID, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * COUNT_CONST
      +	COUNT_CONST, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (COUNT_ID)
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * COUNT_ID
      +	COUNT_ID, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (COUNT_CONST)
      +	COUNT_CONST, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * COUNT_CONST
      +	COUNT_CONST, sizeof(THING)
        , ...)
      )
      
      // 2-factor product, only identifiers.
      @@
      identifier SIZE, COUNT;
      @@
      
      - kmalloc
      + kmalloc_array
        (
      -	SIZE * COUNT
      +	COUNT, SIZE
        , ...)
      
      // 3-factor product with 1 sizeof(type) or sizeof(expression), with
      // redundant parens removed.
      @@
      expression THING;
      identifier STRIDE, COUNT;
      type TYPE;
      @@
      
      (
        kmalloc(
      -	sizeof(TYPE) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(TYPE))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * (COUNT) * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * (COUNT) * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * COUNT * (STRIDE)
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      |
        kmalloc(
      -	sizeof(THING) * COUNT * STRIDE
      +	array3_size(COUNT, STRIDE, sizeof(THING))
        , ...)
      )
      
      // 3-factor product with 2 sizeof(variable), with redundant parens removed.
      @@
      expression THING1, THING2;
      identifier COUNT;
      type TYPE1, TYPE2;
      @@
      
      (
        kmalloc(
      -	sizeof(TYPE1) * sizeof(TYPE2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2))
        , ...)
      |
        kmalloc(
      -	sizeof(THING1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(THING1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(THING1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * COUNT
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      |
        kmalloc(
      -	sizeof(TYPE1) * sizeof(THING2) * (COUNT)
      +	array3_size(COUNT, sizeof(TYPE1), sizeof(THING2))
        , ...)
      )
      
      // 3-factor product, only identifiers, with redundant parens removed.
      @@
      identifier STRIDE, SIZE, COUNT;
      @@
      
      (
        kmalloc(
      -	(COUNT) * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * (STRIDE) * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * STRIDE * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	(COUNT) * (STRIDE) * (SIZE)
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      |
        kmalloc(
      -	COUNT * STRIDE * SIZE
      +	array3_size(COUNT, STRIDE, SIZE)
        , ...)
      )
      
      // Any remaining multi-factor products, first at least 3-factor products,
      // when they're not all constants...
      @@
      expression E1, E2, E3;
      constant C1, C2, C3;
      @@
      
      (
        kmalloc(C1 * C2 * C3, ...)
      |
        kmalloc(
      -	(E1) * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	(E1) * (E2) * E3
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	(E1) * (E2) * (E3)
      +	array3_size(E1, E2, E3)
        , ...)
      |
        kmalloc(
      -	E1 * E2 * E3
      +	array3_size(E1, E2, E3)
        , ...)
      )
      
      // And then all remaining 2 factors products when they're not all constants,
      // keeping sizeof() as the second factor argument.
      @@
      expression THING, E1, E2;
      type TYPE;
      constant C1, C2, C3;
      @@
      
      (
        kmalloc(sizeof(THING) * C2, ...)
      |
        kmalloc(sizeof(TYPE) * C2, ...)
      |
        kmalloc(C1 * C2 * C3, ...)
      |
        kmalloc(C1 * C2, ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * (E2)
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(TYPE) * E2
      +	E2, sizeof(TYPE)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * (E2)
      +	E2, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	sizeof(THING) * E2
      +	E2, sizeof(THING)
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	(E1) * E2
      +	E1, E2
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	(E1) * (E2)
      +	E1, E2
        , ...)
      |
      - kmalloc
      + kmalloc_array
        (
      -	E1 * E2
      +	E1, E2
        , ...)
      )
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      6da2ec56
    • Kees Cook's avatar
      mm: Introduce kvcalloc() · 1c542f38
      Kees Cook authored
      The kv*alloc()-family was missing kvcalloc(). Adding this allows for
      2-argument multiplication conversions of kvzalloc(a * b, ...) into
      kvcalloc(a, b, ...).
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      1c542f38
    • Kees Cook's avatar
      video: uvesafb: Fix integer overflow in allocation · 9f645bcc
      Kees Cook authored
      cmap->len can get close to INT_MAX/2, allowing for an integer overflow in
      allocation. This uses kmalloc_array() instead to catch the condition.
      Reported-by: default avatarDr Silvio Cesare of InfoSect <silvio.cesare@gmail.com>
      Fixes: 8bdb3a2d ("uvesafb: the driver core")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      9f645bcc
    • Silvio Cesare's avatar
      UBIFS: Fix potential integer overflow in allocation · 353748a3
      Silvio Cesare authored
      There is potential for the size and len fields in ubifs_data_node to be
      too large causing either a negative value for the length fields or an
      integer overflow leading to an incorrect memory allocation. Likewise,
      when the len field is small, an integer underflow may occur.
      Signed-off-by: default avatarSilvio Cesare <silvio.cesare@gmail.com>
      Fixes: 1e51764a ("UBIFS: add new flash file system")
      Cc: stable@vger.kernel.org
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      353748a3
    • Kees Cook's avatar
      leds: Use struct_size() in allocation · f3278e3f
      Kees Cook authored
      This case got missed by the earlier treewide struct_size() conversions.
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      f3278e3f
    • Matthew Wilcox's avatar
      Convert intel uncore to struct_size · 6566f907
      Matthew Wilcox authored
      Need to do a bit of rearranging to make this work.
      Signed-off-by: default avatarMatthew Wilcox <mawilcox@microsoft.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      6566f907
    • Matthew Wilcox's avatar
      Convert jffs2 acl to struct_size · a3ac9730
      Matthew Wilcox authored
      Need to tell the compiler that the acl entries follow the acl header.
      Signed-off-by: default avatarMatthew Wilcox <mawilcox@microsoft.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      a3ac9730
    • Matthew Wilcox's avatar
      Convert vhost to struct_size · b2303d7b
      Matthew Wilcox authored
      Signed-off-by: default avatarMatthew Wilcox <mawilcox@microsoft.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      b2303d7b
    • Matthew Wilcox's avatar
      c817e6cc
    • Matthew Wilcox's avatar
      Convert infiniband uverbs to struct_size · 7654cb1b
      Matthew Wilcox authored
      The flows were hidden from the C compiler; expose them as a zero-length
      array to allow struct_size to work.
      Signed-off-by: default avatarMatthew Wilcox <mawilcox@microsoft.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      7654cb1b
    • Matthew Wilcox's avatar
      5b572e25
    • Dan Carpenter's avatar
      test_overflow: fix an IS_ERR() vs NULL bug · 8958fd41
      Dan Carpenter authored
      root_device_register() returns error pointers, it never returns NULL.
      
      Fixes: ca90800a ("test_overflow: Add memory allocation overflow tests")
      Signed-off-by: default avatarDan Carpenter <dan.carpenter@oracle.com>
      Signed-off-by: default avatarKees Cook <keescook@chromium.org>
      8958fd41