- 05 Jul, 2008 1 commit
-
-
H. Peter Anvin authored
Some Dell laptops enter resume with apparent garbage in the segment descriptor registers (almost certainly the result of a botched transition from protected to real mode.) The only way to clean that up is to enter protected mode ourselves and clean out the descriptor registers. This fixes resume on Dell XPS M1210 and Dell D620. Reference: http://bugzilla.kernel.org/show_bug.cgi?id=10927Signed-off-by:
H. Peter Anvin <hpa@zytor.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: pm list <linux-pm@lists.linux-foundation.org> Cc: Len Brown <lenb@kernel.org> Signed-off-by:
Ingo Molnar <mingo@elte.hu> Tested-by:
Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
- 04 Jul, 2008 39 commits
-
-
Linus Torvalds authored
Merge branch 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: xen: fix address truncation in pte mfn<->pfn conversion arch/x86/mm/init_64.c: early_memtest(): fix types x86: fix Intel Mac booting with EFI
-
Pierre Ossman authored
Even the newer ENE controllers have bugs in their DMA engine that make it too dangerous to use. Disable it until someone has figured out under which conditions it corrupts data. This has caused problems at least once, and can be found as bug report 10925 in the kernel bugzilla. Signed-off-by:
Pierre Ossman <drzeus@drzeus.cx> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Paul Jackson authored
Document the kernel boot parameter: relax_domain_level=. Signed-off-by:
Paul Jackson <pj@sgi.com> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Reviewed-by:
Li Zefan <lizf@cn.fujitsu.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Li Zefan authored
# cat /devcg/devices.list a *:* rwm # echo a > devices.allow # cat /devcg/devices.list a *:* rwm a 0:0 rwm This is odd and maybe confusing. With this patch, writing 'a' to devices.allow will add 'a *:* rwm' to the whitelist. Also a few fixes and updates to the document. Signed-off-by:
-
Rajiv Andrade authored
Acked-By:
Debora Velarde <debora@linux.vnet.ibm.com> Cc: <zohar@linux.vnet.ibm.com> Signed-off-by:
-
John Blackwood authored
There is a bug in the output of /sys/devices/system/node/node[n]/meminfo where the Active and Inactive values are in pages instead of Kbytes. Looks like this occurred back in 2.6.20 when the code was changed over to use node_page_state(). Cc: <stable@kernel.org> Signed-off-by:
-
Stephen Rothwell authored
In linux-next there is a commit ("x86: Add performance variants of cpumask operators") which, as part of the 4096 cpu support work adds some new APIs for dealing with cpu masks. Add trivial versions of these now so that subsystems can update in a timely manner and avoid conflicts in linux-next and the next merge window. Cc: Mike Travis <travis@sgi.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by:Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by:
-
Andres Salomon authored
The CaFe chip has a hardware bug that ends up with us getting a timeout value that's too small, causing the following sorts of problems: [ 60.525138] mmcblk0: error -110 transferring data [ 60.531477] end_request: I/O error, dev mmcblk0, sector 1484353 [ 60.533371] Buffer I/O error on device mmcblk0p2, logical block 181632 [ 60.533371] lost page write due to I/O error on mmcblk0p2 Presumably this is an off-by-one error in the hardware. Incrementing the timeout count value that we stuff into the TIMEOUT_CONTROL register gets us a value that works. This bug was originally discovered by Pierre Ossman, I believe. [thanks to Robert Millan for proving that this was still a problem] Signed-off-by:
Andres Salomon <dilinger@debian.org> Cc: Pierre Ossman <drzeus-list@drzeus.cx> Signed-off-by:
-
Andres Salomon authored
This has been sitting around unloved for way too long.. The Marvell CaFe chip's SD implementation chokes during card insertion if one attempts to set the voltage and power up in the same SDHCI_POWER_CONTROL register write. This adds a quirk that does that particular dance in two steps. It also adds an entry to pci_ids.h for the CaFe chip's SD device. Signed-off-by:
-
Mike Miller authored
This patch changes the way we determine the maximum number of outstanding commands for each controller. Most Smart Array controllers can support up to 1024 commands, the notable exceptions are the E200 and E200i. The next generation of controllers which were just added support a mode of operation called Zero Memory Raid (ZMR). In this mode they only support 64 outstanding commands. In Full Function Raid (FFR) mode they support 1024. We have been setting the queue depth by arbitrarily assigning some value for each controller. We needed a better way to set the queue depth to avoid lots of annoying "fifo full" messages. So we made the driver a little smarter. We now read the config table and subtract 4 from the returned value. The -4 is to allow some room for ioctl calls which are not tracked the same way as io commands are tracked. Please consider this for inclusion. Signed-off-by:
Mike Miller <mike.miller@hp.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: <stable@kernel.org> Signed-off-by:
-
Geert Uytterhoeven authored
The old one bounces. Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Cc: Andreas Dilger <adilger@sun.com> Signed-off-by:
-
Paul Jackson authored
Provide a little documentation for the two new fields, Cpus_allowed_list and Mems_allowed_list, that were added to each /proc/<pid>/status file a while back. Signed-off-by:
Michael Kerrisk <mtk.manpages@gmail.com> Cc: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Bastian Blank authored
The build of the Alpha Linux kernel currently fails[1] with inconsistent kallsyms data. As I never saw that before, I thought about hardware problems. But in fact it is a bug in the Linux kernel. The end of the rodata section is marked with the "__end_rodata" symbol. This symbol have different aligning constraints than the inittext parts and therefor the start marked "_sinittext". Because of that the __end_rodata symbol shifts between < _sinittext and == _sinittext. The later variant is seen as a code symbol and recorded in the kallsyms data. On fix would be to move the exception table a little bit and get some space between that two areas. [1]: http://buildd.debian.org/fetch.cgi?pkg=linux-2.6&arch=alpha&ver=2.6.25-5&stamp=1213919009&file=log&as=raw Cc: maximilian attems <max@stro.at> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by:
-
Andrew G. Morgan authored
The filesystem capability support meaning for CAP_SETPCAP is less powerful than the non-filesystem capability support. As such, when filesystem capabilities are configured, we should not permit CAP_SETPCAP to 'enhance' the current process through strace manipulation of a child process. Signed-off-by:
Andrew G. Morgan <morgan@kernel.org> Acked-by:
Serge Hallyn <serue@us.ibm.com> Cc: David Howells <dhowells@redhat.com> Signed-off-by:
-
Andrew G. Morgan authored
This commit includes a bugfix for the fragile setuid fixup code in the case that filesystem capabilities are supported (in access()). The effect of this fix is gated on filesystem capability support because changing securebits is only supported when filesystem capabilities support is configured.) [akpm@linux-foundation.org: coding-style fixes] Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Randy Dunlap authored
Maintain the kernel's Documentation/ tree. This includes tree layout and contents, although not much in terms of new content production. That will usually have to be done by someone familiar with the software, at least in some rough form. Includes review and editorial assistance for people contributing changes to /Documentation. Also includes prodding people for content if something is in need of documentation. Signed-off-by:
Randy Dunlap <rdunlap@xenotime.net> Acked-by:
-
Sebastian Siewior authored
This got broken by the recent "fix rmmod $spi_driver while spidev-user is active". I tested the rmmod & write path but didn't check the read path. I am sorry. The read logic changed and spidev_sync_read() + spidev_sync_write() do not return zero on success anymore but the number of bytes that has been transfered over the bus. This patch changes the logic and copy_to_user() gets called again. The write path returns the number of bytes which are written to the underlying device what may be less than the requested size. This patch makes the same change to the read path or else we request a read of 20 bytes, get 10, don't call copy to user and report to the user that we read 10 bytes. [akpm@linux-foundation.org: remove test of known-to-be-zero local] Signed-off-by:
Sebastian Siewior <bigeasy@linutronix.de> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
Li Zefan authored
Document that a pid of zero(0) can be used to refer to the current task when attaching a task to a cgroup, as in the following usage: # echo 0 > /dev/cgroup/tasks This is consistent with existing cpuset behavior. Signed-off-by:
Dhaval Giani <dhaval@linux.vnet.ibm.com> Cc: Paul Menage <menage@google.com> Cc: Balbir Singh <balbir@in.ibm.com> Cc: Andrea Righi <righi.andrea@gmail.com> Signed-off-by:
-
Samuel Ortiz authored
We probably need someone to look after the few drivers/mfd patches coming every now and then. As agreed with Andrew, I'm ok to do so and my employer is fine with me spending a few working hours on it, if needed. Ben, Philipp, feel free to add your names there too if you wish. Signed-off-by:
Samuel Ortiz <sameo@openedhand.com> Cc: "pHilipp Zabel" <philipp.zabel@gmail.com> Cc: Ian Molton <spyro@f2s.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Dmitry Baryshkov <dbaryshkov@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by:
-
Philipp Zabel authored
This is needed for HTC Blueangel (w3200). At 96MHz its screen flickers. Signed-off-by:
Philipp Zabel <philipp.zabel@gmail.com> Acked-by:
Ian Molton <spyro@f2s.com> Signed-off-by:
-
Philipp Zabel authored
Apart from Sharp SL-Cxx series, there are a few other devices that have ATI Imageon chips, among them HP iPAQ hx4700. Signed-off-by:
-
Akinobu Mita authored
Add kernel-doc comments describing simple_read_from_buffer and memory_read_from_buffer. Signed-off-by:
Akinobu Mita <akinobu.mita@gmail.com> Cc: Christoph Hellwig <hch@lst.de> Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by:
-
Jess Guerrero authored
The url in the help text for ntfs should be updated. Acked-by:
Anton Altaparmakov <aia21@cantab.net> Signed-off-by:
-
Michael Kerrisk authored
Starting last month, I reached a long-time goal: man-pages finally has a paid, full-time maintainer, thanks to a fellowship from the Linux Foundation. It's still a little unclear how long the LF money will last for the fellowship, but for the foreseeable future, I'll be working on: * Properly documenting every new Linux kernel-userland (and glibc) API, and every API change, that is released into the mainline kernel, ideally before actual release. (That's the ideal, but there's a quite a backlog, so I'm not going to achieve the ideal immediately.) * Testing new APIs, again ideally before they are released into the mainline kernel, and probably doing some light bug fixing while I'm at it (e.g., the recent utimensat() work). * Design review of new APIs, which of course can only usefully be done before they are released into the mainline kernel. * And of course accepting patches and dealing with bug reports for existing man pages. Signed-off-by:
Michael Kerrisk <mtk.manpages@googlemail.com> Signed-off-by:
-
Stephen Rothwell authored
In linux-next there is a commit ("rcu: split list.h and move rcu-protected lists into rculist.h") that moved the rcu related list iterators from list.h to rculist.h. Add a trivial version of the file now so that various subsystem trees can start using it now for -next changes and so reduce the build errors caused by adding uses of the moved functions. Cc: Franck Bui-Huu <fbuihuu@gmail.com> Acked-by:Paul E. McKenney <paulmck@linux.vnet.ibm.com> Cc: Josh Triplett <josh@kernel.org> Acked-by:
-
David Howells authored
Provide __ucmpdi2() for MN10300 so that allmodconfig can be built. Signed-off-by:
-
David Howells authored
Export kernel_thread() and empty_zero_page so that allmodconfig can be built for MN10300. Signed-off-by:
-
maximilian attems authored
Adds R61, T61p, X61s, X61, Z61m, Z61p models to whitelist. Fixes this: cullen@lenny:~$ sudo modprobe hdaps FATAL: Error inserting hdaps (/lib/modules/2.6.22-10-generic/kernel/drivers/hwmon/hdaps.ko): No such device [25192.888000] hdaps: supported laptop not found! [25192.888000] hdaps: driver init failed (ret=-19)! Originally based on an Ubuntu patch that got it wrong, the dmidecode output of the corresponding laptops shows LENOVO as the manufacturer. https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.22/+bug/133636 tested on X61s: [ 184.893588] hdaps: inverting axis readings. [ 184.893588] hdaps: LENOVO ThinkPad X61s detected. [ 184.893588] input: hdaps as /class/input/input12 [ 184.924326] hdaps: driver successfully loaded. Cc: Klaus S. Madsen <ubuntu@hjernemadsen.org> Cc: Chuck Short <zulcss@ubuntu.com> Cc: Jean Delvare <khali@linux-fr.org> Cc: Tim Gardner <tim.gardner@canonical.com> Signed-off-by:
maximilian attems <max@stro.at> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Signed-off-by:
-
Pavel Machek authored
Fix stale references to source files in kernel-parameters.txt. Signed-off-by:
Pavel Machek <pavel@suse.cz> Acked-by:
Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by:
-
Balbir Singh authored
Update the delay accounting and taskstats maintainer to Balbir Singh. I spoke to Shailabh and he is now busy with other things. Cc: Shailabh Nagar <nagar1234@in.ibm.com> Cc: Shailabh Nagar <nagar@watson.ibm.com> Signed-off-by:
Balbir Singh <balbir@linux.vnet.ibm.com> Signed-off-by:
-
Stephen M. Cameron authored
Fix regression in cciss driver that if no logical drives are configured, no device nodes at all get created. Signed-off-by:
Stephen M. Cameron <scameron@beardog.cca.cpqcorp.net> Acked-by:
-
Hiroshi Shimamoto authored
Update Documentation/accounting/taskstats-struct.txt for TASKSTATS_VERSION 6, adding scaled time accounting. Signed-off-by:
Hiroshi Shimamoto <h-shimamoto@ct.jp.nec.com> Signed-off-by:
-
Anton Vorontsov authored
This patch fixes following build error when CONFIG_PM is set. CC drivers/video/fsl-diu-fb.o drivers/video/fsl-diu-fb.c: In function 'fsl_diu_suspend': drivers/video/fsl-diu-fb.c:1327: error: 'ofdev' undeclared (first use in this function) drivers/video/fsl-diu-fb.c:1327: error: (Each undeclared identifier is reported only once drivers/video/fsl-diu-fb.c:1327: error: for each function it appears in.) drivers/video/fsl-diu-fb.c: In function 'fsl_diu_resume': drivers/video/fsl-diu-fb.c:1337: error: 'ofdev' undeclared (first use in this function) While I'm at it, also fix this warning: drivers/video/fsl-diu-fb.c: In function 'fsl_diu_alloc': drivers/video/fsl-diu-fb.c:314: warning: format '%lx' expects type 'long unsigned int', but argument 3 has type 'phys_addr_t' And these section mismatches: ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_remove() to the function .exit.text:uninstall_fb() ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function install_fb() to the variable .devinit.data:fsl_diu_mode_db ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() ..from the function fsl_diu_probe() to the function .exit.text:uninstall_fb() Also, some sparse fixes: make two functions static, and use NULL where appropriate. There are still a lot of sparse warnings, mainly wrt absence of __iomem annotations, but some will require ugly __force stuff. I'll leave them for now, since proper fix would be not that trivial as few one-liners below. Signed-off-by:
Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Timur Tabi <timur@freescale.com> Cc: Antonino Daplas <adaplas@gmail.com> Cc: York Sun <yorksun@freescale.com> Cc: Krzysztof Helt <krzysztof.h1@poczta.fm> Signed-off-by:
-
David Brownell authored
The pca953x driver can handle another 8-bit I/O expander, the max7310. This patch adds that chip to the list of supported IDs in that driver, and expands the Kconfig helptext accordingly. Signed-off-by:
-
Paul Mundt authored
Commit 95b570c9 ("Taint kernel after WARN_ON(condition)") introduced a TAINT_WARN that was implemented for all architectures using the generic warn_on_slowpath(), which excluded any architecture that set HAVE_ARCH_WARN_ON. As all of the architectures that implement their own WARN_ON() all go through the report_bug() path (specifically handling BUG_TRAP_TYPE_WARN), taint the kernel there as well for consistency. Tested on avr32 and sh. Also relevant for s390, parisc, and powerpc. Signed-off-by:
Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by:
Paul Mundt <lethal@linux-sh.org> Acked-by:
Kyle McMartin <kyle@mcmartin.ca> Signed-off-by:
-
Michael Halcrow authored
The misc_mtx should provide all the protection required to keep the daemon hash table sane during miscdev registration. Since this mutex is causing gratuitous lockdep warnings, this patch removes it. Signed-off-by:
Michael Halcrow <mhalcrow@us.ibm.com> Reported-by:
Cyrill Gorcunov <gorcunov@gmail.com> Signed-off-by:
-
Jan Kara authored
When write in reiserfs_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
When write in ext4_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by:
-
Jan Kara authored
When write in ext3_quota_write() fails, we have to properly release i_mutex. One error path has been missing the unlock... Signed-off-by:
-
