Wa_14017856879 implementation for mtl.

Bspec: 46046
Signed-off-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230404173220.3175577-1-haridhar.kalvala@intel.com

There may be a disconnect between the GT used by the engine and the GT
used for the VM, requiring us to hold a wakeref on both while the GPU is
active with this request.

v2: added explanation to __queue_and_release_pm
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[ahajda: removed not-yet-upstremed wakeref tracking bits]
Signed-off-by: Andrzej Hajda <andrzej.hajda@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230330-hold_wakeref_for_active_vm-v2-1-724d201499c2@intel.com

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/i915_vma.c:756: warning: Function parameter or member 'ww' not described in 'i915_vma_insert'
 drivers/gpu/drm/i915/i915_vma.c:1744: warning: Function parameter or member 'vma' not described in 'i915_vma_destroy_locked'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-17-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:112: warning: Function parameter or member 'gt' not described in 'guc_hwconfig_init'
 drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:112: warning: expecting prototype for intel_guc_hwconfig_init(). Prototype was for guc_hwconfig_init() instead
 drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:145: warning: Function parameter or member 'gt' not described in 'intel_gt_init_hwconfig'
 drivers/gpu/drm/i915/gt/uc/intel_guc_hwconfig.c:158: warning: Function parameter or member 'gt' not described in 'intel_gt_fini_hwconfig'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-16-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/i915_gem.c:447: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/i915/i915_gem.c:536: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/i915/i915_gem.c:726: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/i915/i915_gem.c:811: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Eric Anholt <eric@anholt.net>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[Jani: fix i915_gem_sw_finish_ioctl while applying]
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-15-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gem/i915_gem_object.c:887: warning: Function parameter or member 'obj' not described in 'i915_gem_object_has_unknown_state'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-14-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gem/i915_gem_wait.c:164: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-13-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gem/i915_gem_ttm_move.c:272: warning: Function parameter or member 'num_pages' not described in 'i915_ttm_memcpy_arg'
 drivers/gpu/drm/i915/gem/i915_gem_ttm_move.c:569: warning: Function parameter or member 'ctx' not described in 'i915_ttm_move'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-12-lee@kernel.org

Hopefully someone knowledgable will follow-up to complete it.

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1292: warning: Function parameter or member 'offset' not described in '__i915_gem_ttm_object_init'
 drivers/gpu/drm/i915/gem/i915_gem_ttm.c:1292: warning: Function parameter or member 'page_size' not described in '__i915_gem_ttm_object_init'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-11-lee@kernel.org

drm/i915/gem/i915_gem_ttm_pm: Provide a couple of missing descriptions for 'flags' and remove some superfluous ones

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Function parameter or member 'flags' not described in 'i915_ttm_backup_region'
 drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Excess function parameter 'allow_gpu' description in 'i915_ttm_backup_region'
 drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:156: warning: Excess function parameter 'backup_pinned' description in 'i915_ttm_backup_region'
 drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:223: warning: Function parameter or member 'flags' not described in 'i915_ttm_restore_region'
 drivers/gpu/drm/i915/gem/i915_gem_ttm_pm.c:223: warning: Excess function parameter 'allow_gpu' description in 'i915_ttm_restore_region'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Nirmoy Das <nirmoy.das@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-10-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gem/i915_gem_domain.c:119: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/i915/gem/i915_gem_domain.c:180: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/i915/gem/i915_gem_domain.c:265: warning: expecting prototype for Changes the cache(). Prototype was for i915_gem_object_set_cache_level() instead
 drivers/gpu/drm/i915/gem/i915_gem_domain.c:470: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/i915/gem/i915_gem_domain.c:514: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-9-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gem/i915_gem_create.c:147: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/i915/gem/i915_gem_create.c:218: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
 drivers/gpu/drm/i915/gem/i915_gem_create.c:402: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
[Jani: fixed i915_gem_create_ext_ioctl while applying]
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-8-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/gt/intel_rps.c:2646: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-7-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/intel_region_ttm.c:201: warning: Function parameter or member 'offset' not described in 'intel_region_ttm_resource_alloc'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-3-lee@kernel.org

Fixes the following W=1 kernel build warning(s):

 drivers/gpu/drm/i915/i915_scatterlist.c:62: warning: Function parameter or member 'size' not described in 'i915_refct_sgt_init'

Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: David Airlie <airlied@gmail.com>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: intel-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230331092607.700644-2-lee@kernel.org

When considering whether to mark one context as stopped and another as
started we need to look at whether the previous and new _contexts_ are
different and not just requests. Otherwise the software tracked context
start time was incorrectly updated to the most recent lite-restore time-
stamp, which was in some cases resulting in active time going backward,
until the context switch (typically the heartbeat pulse) would synchronise
with the hardware tracked context runtime. Easiest use case to observe
this behaviour was with a full screen clients with close to 100% engine
load.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: bb6287cb ("drm/i915: Track context current active time")
Cc: <stable@vger.kernel.org> # v5.19+
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320151423.1708436-1-tvrtko.ursulin@linux.intel.com
[tursulin: Fix spelling in commit msg.]

Wa_22015279794 applies to MTL P from stepping A0 to B0 (exclusive).
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329212336.106161-3-gustavo.sousa@intel.com

Both workarounds require the same implementation and apply to MTL P and
M from stepping A0 to B0 (exclusive).

v2:
  - Remove unrelated brace removal. (Matt)
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Gustavo Sousa <gustavo.sousa@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230329212336.106161-2-gustavo.sousa@intel.com

Userspace can guess the id value and try to race oa_config object creation
with config remove, resulting in a use-after-free if we dereference the
object after unlocking the metrics_lock.  For that reason, unlocking the
metrics_lock must be done after we are done dereferencing the object.
Signed-off-by: Min Li <lm0963hack@gmail.com>
Fixes: f89823c2 ("drm/i915/perf: Implement I915_PERF_ADD/REMOVE_CONFIG interface")
Cc: <stable@vger.kernel.org> # v4.14+
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230328093627.5067-1-lm0963hack@gmail.com
[tursulin: Manually added stable tag.]

The WA states that we need to alert the GSC FW before doing a GSC engine
reset and then wait for 200ms. The GuC owns engine reset, so on the i915
side we only need to apply this for full GT reset.

Given that we do full GT resets in the resume paths to cleanup the HW
state and that a long wait in those scenarios would not be acceptable,
a faster path has been introduced where, if the GSC is idle, we try first
to individually reset the GuC and all engines except the GSC and only fall
back to full reset if that fails.

Note: according to the WA specs, if the GSC is idle it should be possible
to only wait for the uC wakeup time (~15ms) instead of the whole 200ms.
However, the GSC FW team have mentioned that the wakeup time can change
based on other things going on in the HW and pcode, so a good security
margin would be required. Given that when the GSC is idle we already
skip the wait & reset entirely and that this reduced wait would still
likely be too long to use in resume paths, it's not worth adding support
for this reduced wait.

v2: add comment to explain why it is safe to skip the GSC reset (John)
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: John Harrison <john.c.harrison@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323231857.2194435-2-daniele.ceraolospurio@intel.com

Commit 3db9d590 ("drm/i915/gt: Reset twice") modified the code to
always hit the GDRST register twice when doing a reset, with the
reported aim to fix invalid post-reset engine state on some platforms
(Jasperlake being the only one actually mentioned).

This is a problem on MTL, due to the fact that we have to apply a time
consuming WA (coming in the next patch) every time we hit the GDRST
register in a way that can include the GSC engine. Even post MTL, the
expectation is that we'll have some work to do before and after hitting
the GDRST if the GSC is involved.

Since the issue requiring the double reset seems to be limited to older
platforms, instead of trying to handle the double-reset on MTL and
future platforms it is just easier to turn it off. The default on MTL is
also for GuC to own engine reset, with i915 only covering full-GT reset.
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323231857.2194435-1-daniele.ceraolospurio@intel.com

In the rare case where we do a full GT reset after starting the HuC
load and before it completes (which basically boils down to i915 hanging
during init), we need to cancel the delayed load fence, as it will be
re-initialized in the post-reset recovery.

Fixes: 27536e03 ("drm/i915/huc: track delayed HuC load with a fence")
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230313205556.1174503-1-daniele.ceraolospurio@intel.com

Although we now sanitycheck MMIO access during driver load to make sure
the MMIO BAR isn't returning all 0xFFFFFFFF, there have been a few cases
where (temporarily?) unreliable MMIO access has happened after GPU
resets or power events.  We'll often notice this on our next GT register
access since forcewake handling will fail; let's change our handling
slightly so that when this happens we print a more meaningful message
clarifying that the problem is the MMIO access, not forcewake
specifically.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327195547.356584-3-andi.shyti@linux.intel.com

We occasionally see the PCI device in a non-accessible state at the
point the driver is loaded.  When this happens, all BAR accesses will
read back as 0xFFFFFFFF.  Rather than reading registers and
misinterpreting their (invalid) values, let's specifically check for
0xFFFFFFFF in a register that cannot have that value to see if the
device is accessible.
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230327195547.356584-2-andi.shyti@linux.intel.com

Earlier merge dropped an if block when applying the patch -
"drm/i915/mtl: Synchronize i915/BIOS on C6 enabling". Bring back the
if block as the check is required by - "drm/i915/mtl: Disable MC6 for MTL
A step" to disable C6 on media for A0 stepping.

Fixes: 37350409 ("drm/i915/mtl: Synchronize i915/BIOS on C6 enabling")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230324213918.75212-1-umesh.nerlige.ramappa@intel.com

OAM does not work with media C6 enabled on some steppings of MTL.
Disable OAM if we detect that media C6 was enabled in bios.

v2: (Ashutosh)
- Remove drm_notice from the driver load path
- Log a drm_err when opening an OAM stream on affected steppings

v3:
- Initialize the engine group even if mc6 is enabled (Ashutosh)
- Checkpatch fix
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-12-umesh.nerlige.ramappa@intel.com

In some cases, perf revision may rely on specific steppings of a
platform. To determine the platform, pass i915 object to the perf
revision helper.
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-11-umesh.nerlige.ramappa@intel.com

MTL introduces additional OA units dedicated to media use cases. Add
support for programming these OA units by passing the media engine class
and instance parameters.

UMD specific changes for GPUvis support:
https://patchwork.freedesktop.org/patch/522827/?series=114023
https://patchwork.freedesktop.org/patch/522822/?series=114023
https://patchwork.freedesktop.org/patch/522826/?series=114023
https://patchwork.freedesktop.org/patch/522828/?series=114023
https://patchwork.freedesktop.org/patch/522816/?series=114023
https://patchwork.freedesktop.org/patch/522825/?series=114023

v2: (Ashutosh)
- check for IP_VER(12, 70) instead of MTL
- remove PERF_GROUP_OAG comment in mtl_oa_base
- remove oa_buffer.group
- use engine->oa_group->type in engine_supports_oa_format
- remove fw_domains and use FORCEWAKE_ALL
- remove MPES/MPEC comment
- s/xehp/mtl/ in b counter validation function name
- remove engine_supports_oa in __oa_engine_group
- remove warn_ON from __oam_engine_group
- refactor oa_init_groups and oa_init_regs
- assign g->type correctly
- use enum oa_type definition

v3: (Ashutosh)
- Drop oa_unit_functional as engine_supports_oa is enough

v4:
- s/DRM_DEBUG/drm_dbg/
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-10-umesh.nerlige.ramappa@intel.com

One or more engines map to a specific OA unit. All reports from these
engines are captured in the OA buffer managed by this OA unit.

Current i915 OA implementation supports only the OAG unit. OAG primarily
caters to render engine, so i915 OA uses render as the default engine
in the OA implementation. Since there are more OA units on newer
hardware that map to other engines, allow user to pass engine class and
instance to select and program specific OA units.

UMD specific changes for GPUvis support:
https://patchwork.freedesktop.org/patch/522827/?series=114023
https://patchwork.freedesktop.org/patch/522822/?series=114023
https://patchwork.freedesktop.org/patch/522826/?series=114023
https://patchwork.freedesktop.org/patch/522828/?series=114023
https://patchwork.freedesktop.org/patch/522816/?series=114023
https://patchwork.freedesktop.org/patch/522825/?series=114023

v2: (Ashutosh)
- Clarify commit message
- Add drm_dbg
- Clarify uapi description

v3: (Ashutosh)
- Remove irrelevant info from the uapi comment

v4: Ensure engine class:instance is passed together (Ashutosh)
v5: Remove unnecessary quote (Ashutosh)
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-9-umesh.nerlige.ramappa@intel.com

Some of the newer OA formats are not powers of 2. For those formats,
adjust the hw_tail accordingly when checking for new reports.

v2: (Ashutosh)
- Switch to OA_TAKEN for diff calculation
- Use OA_BUFFER_SIZE instead of the vma size
- Update comments
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-8-umesh.nerlige.ramappa@intel.com

Now that OA formats come in flavor of 64 bit reports, the report header
has 64 bit report-id, timestamp, context-id and gpu-ticks fields. When
filtering these reports, use the right width for these fields.

Note that upper dword of context id is reserved, so squash lower dword
only.

v2: (Ashutosh)
- Drop inline
- Update comment with dword definitions - report id and timestamp
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-7-umesh.nerlige.ramappa@intel.com

i915_perf_init can fail due to OOM. Fail driver init if i915_perf_init
fails.

v2: (Jani)
- Reorder patch in the series
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-6-umesh.nerlige.ramappa@intel.com

Now that we may have multiple OA units in a single GT as well as on
separate GTs, create an engine group that maps to a single OA unit.

v2: (Jani)
- Drop warning on ENOMEM
- Reorder patch in the series

v3: (Ashutosh)
- Remove unused members from perf structs
- Update comments
- Update engine_supports_oa check
- Just return 1 in num_perf_groups_per_gt for now
- Set engine->oa_group to NULL to begin with

v4: Use engine_supports_oa() check in oa_init_reg_state (Ashutosh)
v5: Rebase after dropping engine_supports_oa helper
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-5-umesh.nerlige.ramappa@intel.com

Once OA supports media engine class:instance, the engine can only be
validated outside the switch since class and instance parameters are
separate entities. Since OA sseu config depends on engine
class:instance, validate OA sseu config outside the switch.

v2: (Ashutosh)
- Clarify commit message
- Use drm_dbg instead of DRM_DEBUG
- Reorder stack variables
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-4-umesh.nerlige.ramappa@intel.com

If BIOS enables/disables C6, i915 should do the same. Also, retain
this value across driver reloads. This is needed only for MTL as
of now due to an existing bug in OA which needs C6 disabled for
it to function. BIOS behavior is also different across platforms
in terms of how C6 is enabled.
Signed-off-by: Vinay Belgaumkar <vinay.belgaumkar@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-3-umesh.nerlige.ramappa@intel.com

If we fail to adjust the GuC run-control on opening the perf stream,
make sure we unwind the wakeref just taken.

v2: Retain old goto label names (Ashutosh)
v3: Drop bitfield boolean

Fixes: 01e74274 ("drm/i915/guc: Support OA when Wa_16011777198 is enabled")
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230323225901.3743681-2-umesh.nerlige.ramappa@intel.com

A failure to load the GuC is occasionally observed where the GuC log
actually showed that the GuC had loaded just fine. The implication
being that the load just took ever so slightly longer than the 200ms
timeout. Given that the actual time should be tens of milliseconds at
the slowest, this should never happen. So far the issue has generally
been caused by a bad IFWI resulting in low frequencies during boot
(depsite the KMD requesting max frequency). However, the issue seems
to happen more often than one would like.

So a) increase the timeout so that the user still gets a working
system even in the case of slow load. And b) report the frequency
during the load to see if that is the case of the slow down.

v2: Reduce timeout in non-debug builds, add references (Daniele)

References: https://gitlab.freedesktop.org/drm/intel/-/issues/7931
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8060
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8083
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8136
References: https://gitlab.freedesktop.org/drm/intel/-/issues/8137Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Tested-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316220632.3312218-3-John.C.Harrison@Intel.com

There are multiple ways in which the GuC load can fail. The driver was
reporting the status register as is, but not everyone can read the
matrix unfiltered. So add decoding of the common error cases.

Also, remove the comment about interrupt based load completion
checking being not recommended. The interrupt was removed from the GuC
firmware some time ago so it is no longer an option anyway. While at
it, also abort the timeout if a known error code is reported. No need
to keep waiting if the GuC has already given up the load.

v2: Fix mis-matched case and confusing 'success' variable (Daniele).
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316220632.3312218-2-John.C.Harrison@Intel.com

The gt_tlb live selftest has the same code coverage as the
igt_cs_tlb subtest of gtt, except it is better at detecting
TLB bugs.  Furthermore, while igt_cs_tlb is hitting some
unforeseen issues, these issues are either false positives
due to the test being poorly formatted, or are true
positives that can be more easily diagnosed with smaller
tests.  As such, igt_cs_tlb is superceded by and obsoleted
by gt_tlb, meaning it can be removed.
Signed-off-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Acked-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230320192117.287374-1-andi.shyti@linux.intel.com

i915_gem_object_create_lmem_from_data() lacks the flush of the data
written to lmem to ensure the object is marked as dirty and the writes
flushed to the backing store. Once created, we can immediately release
the obj->mm.mapping caching of the vmap.

Fixes: 7acbbc7c ("drm/i915/guc: put all guc objects in lmem when available")
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: <stable@vger.kernel.org> # v5.16+
Signed-off-by: Nirmoy Das <nirmoy.das@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Reviewed-by: Nirmoy Das <nirmoy.das@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230316165918.13074-1-nirmoy.das@intel.com