- 25 Feb, 2018 40 commits
-
-
Jun Nie authored
commit 067fdeb2 upstream. Fix build warning that related to PAGE_SIZE. The maximum DMA length has nothing to do with PAGE_SIZE, just use a fix number for the definition. drivers/dma/zx_dma.c: In function 'zx_dma_prep_memcpy': drivers/dma/zx_dma.c:523:8: warning: division by zero [-Wdiv-by-zero] drivers/dma/zx_dma.c: In function 'zx_dma_prep_slave_sg': drivers/dma/zx_dma.c:567:11: warning: division by zero [-Wdiv-by-zero] Signed-off-by:
Jun Nie <jun.nie@linaro.org> Tested-by:
Shawn Guo <shawn.guo@linaro.org> Signed-off-by:
Vinod Koul <vinod.koul@intel.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-
Arnd Bergmann authored
commit 11d8b058 upstream. The intialization function checks for various failure scenarios, but unfortunately the compiler gets a little confused about the possible combinations, leading to a false-positive build warning when -Wmaybe-uninitialized is set: arch/x86/events/core.c: In function ‘init_hw_perf_events’: arch/x86/events/core.c:264:3: warning: ‘reg_fail’ may be used uninitialized in this function [-Wmaybe-uninitialized] arch/x86/events/core.c:264:3: warning: ‘val_fail’ may be used uninitialized in this function [-Wmaybe-uninitialized] pr_err(FW_BUG "the BIOS has corrupted hw-PMU resources (MSR %x is %Lx)\n", We can't actually run into this case, so this shuts up the warning by initializing the variables to a known-invalid state. Suggested-by:
Peter Zijlstra <peterz@infradead.org> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnaldo Carvalho de Melo <acme@kernel.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20170719125310.2487451-2-arnd@arndb.de Link: https://patchwork.kernel.org/patch/9392595/Signed-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 836856e3 upstream. The cw1200 uses #ifdef to check for CONFIG_PM, but then uses SIMPLE_DEV_PM_OPS, which leaves the references out when CONFIG_PM_SLEEP is not defined, so we get a warning with PM=y && PM_SLEEP=n: drivers/net/wireless/st/cw1200/cw1200_spi.c:450:12: error: 'cw1200_spi_suspend' defined but not used [-Werror=unused-function] This removes the incorrect #ifdef and instead uses a __maybe_unused annotation to let the compiler know it can silently drop the function definition. For the DEV_PM_OPS definition, we can use an IS_ENABLED() check to avoid defining the structure when CONFIG_PM is not set without the #ifdef. Signed-off-by:
Kalle Valo <kvalo@codeaurora.org> Signed-off-by:
-
Arnd Bergmann authored
commit 7fc1503c upstream. On x86, the cw1200 driver produces a rather silly warning about the possible use of the 'ret' variable without an initialization presumably after being confused by the architecture specific definition of WARN_ON: drivers/net/wireless/st/cw1200/wsm.c: In function ‘wsm_handle_rx’: drivers/net/wireless/st/cw1200/wsm.c:1457:9: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] We have already checked that 'count' is larger than 0 here, so we know that 'ret' is initialized. Changing the 'for' loop into do/while also makes this clear to the compiler. Suggested-by:
David Laight <David.Laight@ACULAB.COM> Signed-off-by:
-
Arnd Bergmann authored
commit 7c8fe516 upstream. em28xx selects VIDEO_TUNER, which has a dependency on MEDIA_TUNER, so we get a Kconfig warning if that is disabled: warning: (VIDEO_PVRUSB2 && VIDEO_USBVISION && VIDEO_GO7007 && VIDEO_AU0828_V4L2 && VIDEO_CX231XX && VIDEO_TM6000 && VIDEO_EM28XX && VIDEO_IVTV && VIDEO_MXB && VIDEO_CX18 && VIDEO_CX23885 && VIDEO_CX88 && VIDEO_BT848 && VIDEO_SAA7134 && VIDEO_SAA7164) selects VIDEO_TUNER which has unmet direct dependencies (MEDIA_SUPPORT && MEDIA_TUNER) VIDEO_TUNER does not actually depend on MEDIA_TUNER, and the dependency does nothing except cause the above warning, so let's remove it. Signed-off-by:
Mauro Carvalho Chehab <mchehab@osg.samsung.com> Signed-off-by:
-
Arnd Bergmann authored
commit b97baa3e upstream. The i2c client pointer is only used when CONFIG_I2C is set, and otherwise produces a compile-time warning: drivers/media/usb/hdpvr/hdpvr-core.c: In function 'hdpvr_probe': drivers/media/usb/hdpvr/hdpvr-core.c:276:21: error: unused variable 'client' [-Werror=unused-variable] This uses the same #ifdef to hide the variable when the code using it is hidden. Signed-off-by:
-
Thierry Reding authored
commit 4f250706 upstream. If the DSI output isn't connected, then mdfld_dsi_encoder_get_pipe() will return -1. The mdfld_dsi_dp_mode_set() function doesn't properly check for this condition and causes the following compiler warnings: CC drivers/gpu/drm/gma500/mdfld_dsi_dpi.o drivers/gpu/drm/gma500/mdfld_dsi_dpi.c: In function ‘mdfld_dsi_dpi_mode_set’: drivers/gpu/drm/gma500/mdfld_dsi_dpi.c:828:35: warning: array subscript is below array bounds [-Warray-bounds] u32 pipeconf = dev_priv->pipeconf[pipe]; ^ drivers/gpu/drm/gma500/mdfld_dsi_dpi.c:829:33: warning: array subscript is below array bounds [-Warray-bounds] u32 dspcntr = dev_priv->dspcntr[pipe]; ^ Fix this by checking for a valid pipe before indexing the pipeconf and dspcntr arrays. Cc: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Reviewed-by:
Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by:
Thierry Reding <treding@nvidia.com> Signed-off-by:
Boris Brezillon <boris.brezillon@free-electrons.com> Link: http://patchwork.freedesktop.org/patch/msgid/1450178476-26284-2-git-send-email-boris.brezillon@free-electrons.comSigned-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
-
Heikki Krogerus authored
commit 0ff42305 upstream. In order to enable HSU DMA PCI driver, the HSU DMA Engine must be enabled. This add a check for that. Reported-by:
kbuild test robot <fengguang.wu@intel.com> Signed-off-by:
Heikki Krogerus <heikki.krogerus@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit d8fc2198 upstream. The rockchip spdif driver uses SIMPLE_DEV_PM_OPS to conditionally set its power management functions, but we get a warning about rk_spdif_runtime_resume being unused when CONFIG_PM is not set: sound/soc/rockchip/rockchip_spdif.c:67:12: error: 'rk_spdif_runtime_resume' defined but not used [-Werror=unused-function] This adds a __maybe_unused annotation so the compiler knows it can silently drop it instead of warning. Signed-off-by:
Mark Brown <broonie@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit 27d80718 upstream. I noticed that this function uses a lot of kernel stack when the "latent entropy" plugin is enabled: drivers/isdn/hardware/eicon/message.c: In function 'sig_ind': drivers/isdn/hardware/eicon/message.c:6113:1: error: the frame size of 1168 bytes is larger than 1152 bytes [-Werror=frame-larger-than=] We currently don't warn about this, as we raise the warning limit to 2048 bytes in mainline, but I'd like to lower that limit again in the future, and this function can easily be changed to be more efficient and avoid that warning, by making some of its local variables 'const'. Signed-off-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Arnd Bergmann authored
commit 190b23b4 upstream. In randconfig builds that select VIDEO_EM28XX_V4L2 and MEDIA_SUBDRV_AUTOSELECT, but not MEDIA_CAMERA_SUPPORT, we get a Kconfig warning: warning: (VIDEO_EM28XX_V4L2) selects VIDEO_MT9V011 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT) This avoids the warning by making that 'select' conditional on MEDIA_CAMERA_SUPPORT. Alternatively we could mark EM28XX as 'depends on MEDIA_CAMERA_SUPPORT', but it does not seem to have any real dependency on that itself. Signed-off-by:
Mauro Carvalho Chehab <mchehab@s-opensource.com> Signed-off-by:
-
Arnd Bergmann authored
commit fa6317ee upstream. If MEDIA_SUBDRV_AUTOSELECT and VIDEO_GO7007 are both set, we automatically select VIDEO_OV7640, but that depends on MEDIA_CAMERA_SUPPORT, so we get a Kconfig warning if that is disabled: warning: (VIDEO_GO7007) selects VIDEO_OV7640 which has unmet direct dependencies (MEDIA_SUPPORT && I2C && VIDEO_V4L2 && MEDIA_CAMERA_SUPPORT) This adds another dependency so we don't accidentally select it when it is unavailable. Signed-off-by:
-
Arnd Bergmann authored
commit e42eef4b upstream. The rework of the posted interrupt handling broke building without support for the local APIC: ERROR: "boot_cpu_physical_apicid" [arch/x86/kvm/kvm-intel.ko] undefined! That configuration is probably not particularly useful anyway, so we can avoid the randconfig failures by adding a Kconfig dependency. Fixes: 8b306e2f ("KVM: VMX: avoid double list add with VT-d posted interrupts") Signed-off-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit ea4348c8 upstream. Older versions of gcc warn about the tca8418_irq_handler function as they can't keep track of the variable assignment inside of the loop when using the -Wmaybe-unintialized flag: drivers/input/keyboard/tca8418_keypad.c: In function ‘tca8418_irq_handler’: drivers/input/keyboard/tca8418_keypad.c:172:9: error: ‘reg’ may be used uninitialized in this function [-Werror=maybe-uninitialized] drivers/input/keyboard/tca8418_keypad.c:165:5: note: ‘reg’ was declared here This is fixed in gcc-6, but it's possible to rearrange the code in a way that avoids the warning on older compilers as well. Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit b74c0a99 upstream. gcc-4.9 notices that the validate_init() function returns unintialized data when called with a zero 'nr_buffers' argument, when called with the -Wmaybe-uninitialized flag: drivers/gpu/drm/nouveau/nouveau_gem.c: In function ‘validate_init.isra.6’: drivers/gpu/drm/nouveau/nouveau_gem.c:457:5: error: ‘ret’ may be used uninitialized in this function [-Werror=maybe-uninitialized] However, the only caller of this function always passes a nonzero argument, and gcc-6 is clever enough to take this into account and not warn about it any more. Adding an explicit initialization to -EINVAL here is correct even if the caller changed, and it avoids the warning on gcc-4.9 as well. Signed-off-by:
Karol Herbst <karolherbst@gmail.com> Signed-off-by:
Ben Skeggs <bskeggs@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit 3538aa6e upstream. While testing with CONFIG_UBSAN, I got this warning: drivers/media/i2c/tc358743.c: In function 'tc358743_probe': drivers/media/i2c/tc358743.c:1930:1: error: the frame size of 2480 bytes is larger than 2048 bytes [-Werror=frame-larger-than=] The problem is that the i2c_rd8/wr8/rd16/... functions in this driver pass a pointer to a local variable into a common function, and each call to one of them adds another variable plus redzone to the stack. I also noticed that the way this is done is broken on big-endian machines, as we copy the registers in CPU byte order. To address both those problems, I'm adding two helper functions for reading a register of up to 32 bits with correct endianess and change all other functions to use that instead. Just to be sure we don't get the problem back with changed optimizations in gcc, I'm also marking the new functions as 'noinline', although my tests with gcc-7 don't require that. Signed-off-by:
Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by:
-
Randy Dunlap authored
commit 82ddecfe upstream. Fix build errors by limiting UNISYS_VISORINPUT to the INPUT kconfig setting. drivers/built-in.o: In function `visorinput_remove': visorinput.c:(.text+0x20802e): undefined reference to `input_unregister_device' drivers/built-in.o: In function `visorinput_probe': visorinput.c:(.text+0x208177): undefined reference to `input_allocate_device' visorinput.c:(.text+0x208241): undefined reference to `input_register_device' visorinput.c:(.text+0x20824d): undefined reference to `input_free_device' visorinput.c:(.text+0x208286): undefined reference to `input_allocate_device' visorinput.c:(.text+0x208302): undefined reference to `input_set_abs_params' visorinput.c:(.text+0x20831a): undefined reference to `input_set_abs_params' visorinput.c:(.text+0x20833f): undefined reference to `input_register_device' visorinput.c:(.text+0x20834b): undefined reference to `input_free_device' visorinput.c:(.text+0x20835f): undefined reference to `input_set_capability' drivers/built-in.o: In function `visorinput_channel_interrupt': visorinput.c:(.text+0x20851e): undefined reference to `input_event' visorinput.c:(.text+0x20862c): undefined reference to `input_event' drivers/built-in.o: In function `input_report_key': visorinput.c:(.text+0x207fd1): undefined reference to `input_event' drivers/built-in.o: In function `input_sync': visorinput.c:(.text+0x207fdc): undefined reference to `input_event' Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
Luis R. Rodriguez authored
commit 5abe9b26 upstream. As of next-20160607 with allyesconfig we get this linker failure: MODPOST vmlinux.o WARNING: vmlinux.o(.text+0x21bc0d): Section mismatch in reference from the function intel_scu_devices_create() to the function .init.text:i2c_register_board_info() This is caused by the fact that intel_scu_devices_create() calls i2c_register_board_info() and intel_scu_devices_create() is not annotated with __init. This typically involves manual code inspection and if one is certain this is correct we would just peg intel_scu_devices_create() with a __ref annotation. In this case this would be wrong though as the intel_scu_devices_create() call is exported, and used in the ipc_probe() on drivers/platform/x86/intel_scu_ipc.c. The issue is that even though builtin_pci_driver(ipc_driver) is used this just exposes the probe routine, which can occur at any point in time if this bus supports hotplug. A race can happen between kernel_init_freeable() that calls the init calls (in this case registeres the intel_scu_ipc.c driver, and later free_initmem(), which would free the i2c_register_board_info(). If a probe happens later in boot i2c_register_board_info() would not be present and we should get a page fault. Signed-off-by:
Luis R. Rodriguez <mcgrof@kernel.org> [wsa: made function declaration a one-liner] Signed-off-by:
Wolfram Sang <wsa@the-dreams.de> Signed-off-by:
-
Arnd Bergmann authored
commit 733d0def upstream. The flexcop driver has two functions that are normally used, except when multiple frontend drivers are disabled: drivers/media/common/b2c2/flexcop-fe-tuner.c:42:12: warning: 'flexcop_set_voltage' defined but not used [-Wunused-function] drivers/media/common/b2c2/flexcop-fe-tuner.c:71:12: warning: 'flexcop_sleep' defined but not used [-Wunused-function] This avoids the build warning by updating the #ifdef for flexcop_set_voltage to the exact condition under which it is used. For flexcop_sleep, the condition is rather complex, so I resort to marking it as __maybe_unused, so the compiler can silently drop it. Signed-off-by:
-
Arnd Bergmann authored
commit 3021376d upstream. The cxgb4 prints an MMIO resource using the "0x%x" and "%p" format strings on the length and start, respective, but that triggers a compiler warning when using a 64-bit resource_size_t on a 32-bit architecture: drivers/infiniband/hw/cxgb4/device.c: In function 'c4iw_rdev_open': drivers/infiniband/hw/cxgb4/device.c:807:7: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast] (void *)pci_resource_start(rdev->lldi.pdev, 2), This changes the format string to use %pR instead, which pretty-prints the resource, avoids the warning and is shorter. Signed-off-by:
Steve Wise <swise@opengridcomputing.com> Signed-off-by:
Doug Ledford <dledford@redhat.com> Signed-off-by:
-
Colin Ian King authored
commit 7ca6574a upstream. duplicate const can be removed, it is redundant. Found by static analysis using smatch. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
Jonathan Cameron <jic23@kernel.org> Signed-off-by:
-
Arnd Bergmann authored
commit ec3995da upstream. The newly added mediatek drivers for mt8173 select codes that depend on I2C, which cuases a build failure if I2C is disabled: warning: (SND_SOC_ADAU1761_I2C && SND_SOC_ADAU1781_I2C && SND_SOC_ADAU1977_I2C && SND_SOC_RT5677 && EXTCON_MAX14577 && EXTCON_MAX77693 && EXTCON_MAX77843 && BMC150_ACCEL_I2C && BMG160_I2C) selects REGMAP_I2C which has unmet direct dependencies (I2C) codecs/rt5645.c:3854:1: warning: data definition has no type or storage class codecs/rt5645.c:3854:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] codecs/rt5677.c:5270:1: warning: data definition has no type or storage class 77_i2c_driver); codecs/rt5677.c:5270:1: error: type defaults to 'int' in declaration of 'module_i2c_driver' [-Werror=implicit-int] This adds an explicit dependency. Signed-off-by:
Koro Chen <koro.chen@mediatek.com> Signed-off-by:
-
Arnd Bergmann authored
commit 2f44e29c upstream. A bug fix to the MSIx handling in vfio added references to functions that may not be defined if MSI is disabled in the kernel, resulting in this link error: drivers/built-in.o: In function `vfio_msi_set_vector_signal': :(.text+0x450808): undefined reference to `get_cached_msi_msg' :(.text+0x45080c): undefined reference to `write_msi_msg' As suggested by Alex Williamson, add stub implementations for get_cached_msi_msg() and pci_write_msi_msg(). In case this bugfix gets backported, please note that the #ifdef has changed over time, originally both functions were implemented in drivers/pci/msi.c and controlled by CONFIG_PCI_MSI, while nowadays get_cached_msi_msg() is part of the generic MSI support and can be used without PCI. Fixes: b8f02af0 ("vfio/pci: Restore MSIx message prior to enabling") Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Arnd Bergmann authored
commit 05ead496 upstream. When CONFIG_PCI is not set, enabling CONFIG_CYZ_INTR has no practical effect other than generating a warning about an unused function: drivers/tty/cyclades.c:1184:20: warning: 'cyz_interrupt' defined but not used [-Wunused-function] static irqreturn_t cyz_interrupt(int irq, void *dev_id) This adds a dependency to avoid that warning. Signed-off-by:
-
Paul Bolle authored
commit 0e7c875d upstream. Use the upper_32_bits() macro instead of the four line equivalent that triggers a GCC warning on 32 bits x86: drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c: In function 'vmw_cmdbuf_header_submit': drivers/gpu/drm/vmwgfx/vmwgfx_cmdbuf.c:297:25: warning: right shift count >= width of type [-Wshift-count-overflow] val = (header->handle >> 32); ^ And use the lower_32_bits() macro instead of and-ing with a 32 bits mask. Signed-off-by:
Paul Bolle <pebolle@tiscali.nl> Acked-by:
Joe Perches <joe@perches.com> Signed-off-by:
-
Arnd Bergmann authored
commit 1e09c106 upstream. While build testing with randconfig on x86, I ran into this warning that appears to have been around forever drivers/net/ethernet/ti/tlan.c: In function ‘tlan_probe1’: drivers/net/ethernet/ti/tlan.c:614:1: error: label ‘err_out’ defined but not used [-Werror=unused-label] This can be trivially avoided by just moving the label into the existing #ifdef. Signed-off-by:
-
Colin Ian King authored
commit 75d7e7d7 upstream. Conditionally declare suspend_data on CONFIG_PM to avoid the following warning when CONFIG_OM is not enabled: drivers/platform/x86/tc1100-wmi.c:55:27: warning: 'suspend_data' defined but not used [-Wunused-variable] Signed-off-by:
Darren Hart <dvhart@linux.intel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 52b79e2b upstream. When CONFIG_PROC_FS, CONFIG_IP_PNP_BOOTP, CONFIG_IP_PNP_DHCP and CONFIG_IP_PNP_RARP are all disabled, we get a warning about the ic_proto_used variable being unused: net/ipv4/ipconfig.c:146:12: error: 'ic_proto_used' defined but not used [-Werror=unused-variable] This avoids the warning, by making the definition conditional on whether a dynamic IP configuration protocol is configured. If not, we know that the value is always zero, so we can optimize away the variable and all code that depends on it. Signed-off-by:
-
Arnd Bergmann authored
commit f6ca9f46 upstream. The proc_create() and remove_proc_entry() functions do not reference their arguments when CONFIG_PROC_FS is disabled, so we get a couple of warnings about unused variables in IPVS: ipvs/ip_vs_app.c:608:14: warning: unused variable 'net' [-Wunused-variable] ipvs/ip_vs_ctl.c:3950:14: warning: unused variable 'net' [-Wunused-variable] ipvs/ip_vs_ctl.c:3994:14: warning: unused variable 'net' [-Wunused-variable] This removes the local variables and instead looks them up separately for each use, which obviously avoids the warning. Signed-off-by:
Julian Anastasov <ja@ssi.bg> Signed-off-by:
Simon Horman <horms@verge.net.au> Signed-off-by:
-
Borislav Petkov authored
commit 20ab6677 upstream. Fix: arch/x86/platform/olpc/olpc-xo15-sci.c:199:12: warning: ‘xo15_sci_resume’ defined but not used [-Wunused-function] static int xo15_sci_resume(struct device *dev) ^ which I see in randconfig builds here. Signed-off-by:
Borislav Petkov <bp@suse.de> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/20161126142706.13602-1-bp@alien8.deSigned-off-by:
-
Glen Lee authored
commit b22fa80c upstream. This patch fixes build warning and error reported by kbuild test robot. It is fixed by including netdevice.h. >> drivers/staging/wilc1000/wilc_wlan_if.h:940:27: warning: 'struct net_device' declared inside parameter list int wilc_wlan_init(struct net_device *dev, wilc_wlan_inp_t *inp); >> drivers/staging/wilc1000/wilc_wlan_if.h:940:27: warning: its scope is only this definition or declaration, which is probably not what you want >> drivers/staging/wilc1000/wilc_wlan.c:1954:5: error: conflicting types for 'wilc_wlan_init' int wilc_wlan_init(struct net_device *dev, wilc_wlan_inp_t *inp) Fixes: 30135ce ("staging: wilc1000: wilc_wlan_init: add argument struct net_device") Reported-by:
Glen Lee <glen.lee@atmel.com> Signed-off-by:
-
Arnd Bergmann authored
commit 2acd8464 upstream. The rtl8821ae_dm_txpower_tracking_callback_thermalmeter function contains a call to RT_TRACE() that is indented in a misleading way, as pointed out by a gcc-6 warning: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c: In function 'rtl8821ae_dm_txpower_tracking_callback_thermalmeter': drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2491:4: error: statement is indented as if it were guarded by... RT_TRACE(rtlpriv, COMP_POWER_TRACKING, DBG_LOUD, ^~~~~~~~ drivers/net/wireless/realtek/rtlwifi/rtl8821ae/dm.c:2488:3: note: ...this 'for' clause, but it is not for (p = RF90_PATH_A; p < MAX_PATH_NUM_8821A; p++) ^~~ It is clear from the context that the call was not meant to be part of the loop and only the indentation is wrong, so this removes the extra tabs. Signed-off-by:
Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by:
-
Arnd Bergmann authored
commit f3bb2376 upstream. This avoids a harmless randconfig warning I get when USB_NET_CDC_SUBSET is enabled, but all of the more specific drivers are not: drivers/net/usb/cdc_subset.c:241:2: #warning You need to configure some hardware for this driver The current behavior is clearly intentional, giving a warning when a user picks a configuration that won't do anything good. The only reason for even addressing this is that I'm getting close to eliminating all 'randconfig' warnings on ARM, and this came up a couple of times. My workaround is to not even build the module when none of the configurations are enable. Alternatively we could simply remove the #warning (nothing wrong for compile-testing), turn it into a runtime warning, or change the Kconfig options into a menu to hide CONFIG_USB_NET_CDC_SUBSET. Signed-off-by:
-
Arnd Bergmann authored
commit b93f342d upstream. The exynos random driver uses #ifdef to check for CONFIG_PM, but then uses SIMPLE_DEV_PM_OPS, which leaves the references out when CONFIG_PM_SLEEP is not defined, so we get a warning with PM=y && PM_SLEEP=n: drivers/char/hw_random/exynos-rng.c:166:12: error: 'exynos_rng_suspend' defined but not used [-Werror=unused-function] drivers/char/hw_random/exynos-rng.c:171:12: error: 'exynos_rng_resume' defined but not used [-Werror=unused-function] This removes the incorrect #ifdef and instead uses a __maybe_unused annotation to let the compiler know it can silently drop the function definition. Signed-off-by:
Krzysztof Kozlowski <k.kozlowski@samsung.com> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Arnd Bergmann authored
commit 24ed78dc upstream. The sm712fb framebuffer driver encloses the power-management functions in #ifdef CONFIG_PM, but the smtcfb_pci_suspend/resume functions are only really used when CONFIG_PM_SLEEP is also set, as a frequent gcc warning shows: fbdev/sm712fb.c:1549:12: warning: 'smtcfb_pci_suspend' defined but not used fbdev/sm712fb.c:1572:12: warning: 'smtcfb_pci_resume' defined but not used The driver also avoids using the SIMPLE_DEV_PM_OPS macro when CONFIG_PM is unset, which is redundant. This changes the driver to remove the #ifdef and instead mark the functions as __maybe_unused, which is a nicer anyway, as it provides build testing for all the code in all configurations and is harder to get wrong. Signed-off-by:
Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by:
-
Sudip Mukherjee authored
commit 9220e39b upstream. We were getting build warning about unused variable "tsc_msr" and "va_tsc" while building for i386 allmodconfig. Signed-off-by:
Sudip Mukherjee <sudip@vectorindia.org> Signed-off-by:
-
Arnd Bergmann authored
commit 5d06ee20 upstream. When a user calls 'make -s', we can assume they don't want to see any output except for warnings and errors, but instead they see this for a warning free build: ### ### Now generating an X.509 key pair to be used for signing modules. ### ### If this takes a long time, you might wish to run rngd in the ### background to keep the supply of entropy topped up. It ### needs to be run as root, and uses a hardware random ### number generator if one is available. ### Generating a 4096 bit RSA private key .................................................................................................................................................................................................................................++ ..............................................................................................................................++ writing new private key to 'certs/signing_key.pem' ----- ### ### Key pair generated. ### The output can confuse simple build testing scripts that just check for an empty build log. This patch silences all the output: - "echo" is changed to "@$(kecho)", which is dropped when "-s" gets passed - the openssl command itself is only printed with V=1, using the $(Q) macro - The output of openssl gets redirected to /dev/null on "-s" builds. Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
Arnd Bergmann authored
commit b54729b6 upstream. The s6e8ax0 suspend/resume functions are hidden inside of an #ifdef when CONFIG_PM is set to avoid unused function warnings, but they call some other functions that nothing else calls, and we get warnings about those: drivers/video/fbdev/exynos/s6e8ax0.c:449:13: error: 's6e8ax0_sleep_in' defined but not used [-Werror=unused-function] drivers/video/fbdev/exynos/s6e8ax0.c:485:13: error: 's6e8ax0_display_off' defined but not used [-Werror=unused-function] This marks the PM functions as __maybe_unused so the compiler can silently drop them when they are not referenced. Signed-off-by:
-
Arnd Bergmann authored
commit f5f92b36 upstream. MTD allows compile-time configuration of the possible CFI geometry settings that are allowed by the kernel, but that includes a couple of invalid configurations, where no bank width or no interleave setting is allowed. These are then caught with a compile-time warning: include/linux/mtd/cfi.h:76:2: warning: #warning No CONFIG_MTD_CFI_Ix selected. No NOR chip support can work. include/linux/mtd/map.h:145:2: warning: #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work" This is a bit annoying for randconfig tests, and can be avoided if we change the Kconfig logic to always select the simplest configuration when no other one is enabled. Signed-off-by:
Brian Norris <computersforpeace@gmail.com> Signed-off-by:
-
Arnd Bergmann authored
commit 1873315f upstream. By convention, the FIFO address we pass using dmaengine_slave_config is a physical address in the form that is understood by the DMA engine, as a dma_addr_t, phys_addr_t or resource_size_t. The sh_flctl driver however passes a virtual __iomem address that gets cast to dma_addr_t in the slave driver. This happens to work on shmobile because that platform sets up an identity mapping for its MMIO regions, but such code is not portable to other platforms, and prevents us from ever changing the platform mapping or reusing the driver on other architectures like ARM64 that might not have the mapping. We also get a warning about a type mismatch for the case that dma_addr_t is wider than a pointer, i.e. when CONFIG_LPAE is set: drivers/mtd/nand/sh_flctl.c: In function 'flctl_setup_dma': drivers/mtd/nand/sh_flctl.c:163:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] cfg.dst_addr = (dma_addr_t)FLDTFIFO(flctl); This changes the driver to instead pass the physical address of the FIFO that is extracted from the MMIO resource, making the code more portable and avoiding the warning. Signed-off-by:
-
