- 25 Jul, 2018 35 commits
-
-
Peter Zijlstra authored
commit ea00f301 upstream. Joe Konno reported a compile failure resulting from using an MSR without inclusion of <asm/msr-index.h>, and while the current code builds fine (by accident) this needs fixing for future patches. Reported-by:
Joe Konno <joe.konno@linux.intel.com> Signed-off-by:
Peter Zijlstra (Intel) <peterz@infradead.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: arjan@linux.intel.com Cc: bp@alien8.de Cc: dan.j.williams@intel.com Cc: dave.hansen@linux.intel.com Cc: dwmw2@infradead.org Cc: dwmw@amazon.co.uk Cc: gregkh@linuxfoundation.org Cc: hpa@zytor.com Cc: jpoimboe@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: luto@kernel.org Fixes: 20ffa1ca ("x86/speculation: Add basic IBPB (Indirect Branch Prediction Barrier) support") Link: http://lkml.kernel.org/r/20180213132819.GJ25201@hirez.programming.kicks-ass.netSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Srivatsa S. Bhat <srivatsa@csail.mit.edu> Reviewed-by:
Matt Helsley (VMware) <matt.helsley@gmail.com> Reviewed-by:
Alexey Makhalov <amakhalov@vmware.com> Reviewed-by:
Bo Gan <ganb@vmware.com> Signed-off-by:
-
Dan Williams authored
commit be3233fb upstream. Allow the compiler to handle @size as an immediate value or memory directly rather than allocating a register. Reported-by:
Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/151797010204.1289.1510000292250184993.stgit@dwillia2-desk3.amr.corp.intel.comSigned-off-by:
-
Ingo Molnar authored
commit 21e433bd upstream. Harmonize all the Spectre messages so that a: dmesg | grep -i spectre ... gives us most Spectre related kernel boot messages. Also fix a few other details: - clarify a comment about firmware speculation control - s/KPTI/PTI - remove various line-breaks that made the code uglier Acked-by:
David Woodhouse <dwmw@amazon.co.uk> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-kernel@vger.kernel.org Signed-off-by:
-
David Woodhouse authored
commit d37fc6d3 upstream. Arjan points out that the Intel document only clears the 0xc2 microcode on *some* parts with CPUID 506E3 (INTEL_FAM6_SKYLAKE_DESKTOP stepping 3). For the Skylake H/S platform it's OK but for Skylake E3 which has the same CPUID it isn't (yet) cleared. So removing it from the blacklist was premature. Put it back for now. Also, Arjan assures me that the 0x84 microcode for Kaby Lake which was featured in one of the early revisions of the Intel document was never released to the public, and won't be until/unless it is also validated as safe. So those can change to 0x80 which is what all *other* versions of the doc have identified. Once the retrospective testing of existing public microcodes is done, we should be back into a mode where new microcodes are only released in batches and we shouldn't even need to update the blacklist for those anyway, so this tweaking of the list isn't expected to be a thing which keeps happening. Requested-by:
Arjan van de Ven <arjan.van.de.ven@intel.com> Signed-off-by:
-
David Woodhouse authored
commit 17513420 upstream. Intel have retroactively blessed the 0xc2 microcode on Skylake mobile and desktop parts, and the Gemini Lake 0x22 microcode is apparently fine too. We blacklisted the latter purely because it was present with all the other problematic ones in the 2018-01-08 release, but now it's explicitly listed as OK. We still list 0x84 for the various Kaby Lake / Coffee Lake parts, as that appeared in one version of the blacklist and then reverted to 0x80 again. We can change it if 0x84 is actually announced to be safe. Signed-off-by:
-
Dan Williams authored
commit 6b8cf5cc upstream. At entry userspace may have populated registers with values that could otherwise be useful in a speculative execution attack. Clear them to minimize the kernel's attack surface. Originally-From: Andi Kleen <ak@linux.intel.com> Signed-off-by:
-
Denys Vlasenko authored
commit 778843f9 upstream Use of a temporary R8 register here seems to be unnecessary. "push %r8" is a two-byte insn (it needs REX prefix to specify R8), "push $0" is two-byte too. It seems just using the latter would be no worse. Thus, code had an unnecessary "xorq %r8,%r8" insn. It probably costs nothing in execution time here since we are probably limited by store bandwidth at this point, but still. Run-tested under QEMU: 32-bit calls still work: / # ./test_syscall_vdso32 [RUN] Executing 6-argument 32-bit syscall via VDSO [OK] Arguments are preserved across syscall [NOTE] R11 has changed:0000000000200ed7 - assuming clobbered by SYSRET insn [OK] R8..R15 did not leak kernel data [RUN] Executing 6-argument 32-bit syscall via INT 80 [OK] Arguments are preserved across syscall [OK] R8..R15 did not leak kernel data [RUN] Running tests under ptrace [RUN] Executing 6-argument 32-bit syscall via VDSO [OK] Arguments are preserved across syscall [NOTE] R11 has changed:0000000000200ed7 - assuming clobbered by SYSRET insn [OK] R8..R15 did not leak kernel data [RUN] Executing 6-argument 32-bit syscall via INT 80 [OK] Arguments are preserved across syscall [OK] R8..R15 did not leak kernel data Signed-off-by:
Denys Vlasenko <dvlasenk@redhat.com> Acked-by:
Andy Lutomirski <luto@kernel.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kees Cook <keescook@chromium.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Drewry <wad@chromium.org> Cc: linux-kernel@vger.kernel.org Link: http://lkml.kernel.org/r/1462201010-16846-1-git-send-email-dvlasenk@redhat.comSigned-off-by:
-
Arnd Bergmann authored
(cherry picked from commit 4bf5d56d) I'm seeing build failures from the two newly introduced arrays that are marked 'const' and '__initdata', which are mutually exclusive: arch/x86/kernel/cpu/common.c:882:43: error: 'cpu_no_speculation' causes a section type conflict with 'e820_table_firmware_init' arch/x86/kernel/cpu/common.c:895:43: error: 'cpu_no_meltdown' causes a section type conflict with 'e820_table_firmware_init' The correct annotation is __initconst. Fixes: fec9434a ("x86/pti: Do not enable PTI on CPUs which are not vulnerable to Meltdown") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Cc: Ricardo Neri <ricardo.neri-calderon@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Thomas Garnier <thgarnie@google.com> Cc: David Woodhouse <dwmw@amazon.co.uk> Link: https://lkml.kernel.org/r/20180202213959.611210-1-arnd@arndb.deSigned-off-by:
-
David Woodhouse authored
(cherry picked from commit 7fcae111) Despite the fact that all the other code there seems to be doing it, just using set_cpu_cap() in early_intel_init() doesn't actually work. For CPUs with PKU support, setup_pku() calls get_cpu_cap() after c->c_init() has set those feature bits. That resets those bits back to what was queried from the hardware. Turning the bits off for bad microcode is easy to fix. That can just use setup_clear_cpu_cap() to force them off for all CPUs. I was less keen on forcing the feature bits *on* that way, just in case of inconsistencies. I appreciate that the kernel is going to get this utterly wrong if CPU features are not consistent, because it has already applied alternatives by the time secondary CPUs are brought up. But at least if setup_force_cpu_cap() isn't being used, we might have a chance of *detecting* the lack of the corresponding bit and either panicking or refusing to bring the offending CPU online. So ensure that the appropriate feature bits are set within get_cpu_cap() regardless of how many extra times it's called. Fixes: 2961298e ("x86/cpufeatures: Clean up Spectre v2 related CPUID flags") Signed-off-by:
-
David Woodhouse authored
(cherry picked from commit 2961298e) We want to expose the hardware features simply in /proc/cpuinfo as "ibrs", "ibpb" and "stibp". Since AMD has separate CPUID bits for those, use them as the user-visible bits. When the Intel SPEC_CTRL bit is set which indicates both IBRS and IBPB capability, set those (AMD) bits accordingly. Likewise if the Intel STIBP bit is set, set the AMD STIBP that's used for the generic hardware capability. Hide the rest from /proc/cpuinfo by putting "" in the comments. Including RETPOLINE and RETPOLINE_AMD which shouldn't be visible there. There are patches to make the sysfs vulnerabilities information non-readable by non-root, and the same should apply to all information about which mitigations are actually in use. Those *shouldn't* appear in /proc/cpuinfo. The feature bit for whether IBPB is actually used, which is needed for ALTERNATIVEs, is renamed to X86_FEATURE_USE_IBPB. Originally-by:
Borislav Petkov <bp@suse.de> Signed-off-by:
-
David Woodhouse authored
(cherry picked from commit 20ffa1ca) Expose indirect_branch_prediction_barrier() for use in subsequent patches. [ tglx: Add IBPB status to spectre_v2 sysfs file ] Co-developed-by:
KarimAllah Ahmed <karahmed@amazon.de> Signed-off-by:
-
David Woodhouse authored
(cherry picked from commit a5b29663) This doesn't refuse to load the affected microcodes; it just refuses to use the Spectre v2 mitigation features if they're detected, by clearing the appropriate feature bits. The AMD CPUID bits are handled here too, because hypervisors *may* have been exposing those bits even on Intel chips, for fine-grained control of what's available. It is non-trivial to use x86_match_cpu() for this table because that doesn't handle steppings. And the approach taken in commit bd9240a1 almost made me lose my lunch. Signed-off-by:
-
David Woodhouse authored
(cherry picked from commit fec9434a) Also, for CPUs which don't speculate at all, don't report that they're vulnerable to the Spectre variants either. Leave the cpu_no_meltdown[] match table with just X86_VENDOR_AMD in it for now, even though that could be done with a simple comparison, on the assumption that we'll have more to add. Based on suggestions from Dave Hansen and Alan Cox. Signed-off-by:
Dave Hansen <dave.hansen@intel.com> Cc: gnomes@lxorguk.ukuu.org.uk Cc: ak@linux.intel.com Cc: ashok.raj@intel.com Cc: karahmed@amazon.de Cc: arjan@linux.intel.com Cc: torvalds@linux-foundation.org Cc: peterz@infradead.org Cc: bp@alien8.de Cc: pbonzini@redhat.com Cc: tim.c.chen@linux.intel.com Cc: gregkh@linux-foundation.org Link: https://lkml.kernel.org/r/1516896855-7642-6-git-send-email-dwmw@amazon.co.ukSigned-off-by:
-
David Woodhouse authored
(cherry picked from commit 1e340c60) Add MSR and bit definitions for SPEC_CTRL, PRED_CMD and ARCH_CAPABILITIES. See Intel's 336996-Speculative-Execution-Side-Channel-Mitigations.pdf Signed-off-by:
-
David Woodhouse authored
(cherry picked from commit 5d10cbc9) AMD exposes the PRED_CMD/SPEC_CTRL MSRs slightly differently to Intel. See http://lkml.kernel.org/r/2b3e25cc-286d-8bd0-aeaf-9ac4aae39de8@amd.comSigned-off-by:
-
David Woodhouse authored
(cherry picked from commit fc67dd70) Add three feature bits exposed by new microcode on Intel CPUs for speculation control. Signed-off-by:
-
David Woodhouse authored
(cherry picked from commit 95ca0ee8) This is a pure feature bits leaf. There are two AVX512 feature bits in it already which were handled as scattered bits, and three more from this leaf are going to be added for speculation control features. Signed-off-by:
-
Nick Desaulniers authored
commit d0a8d937 upstream. native_save_fl() is marked static inline, but by using it as a function pointer in arch/x86/kernel/paravirt.c, it MUST be outlined. paravirt's use of native_save_fl() also requires that no GPRs other than %rax are clobbered. Compilers have different heuristics which they use to emit stack guard code, the emittance of which can break paravirt's callee saved assumption by clobbering %rcx. Marking a function definition extern inline means that if this version cannot be inlined, then the out-of-line version will be preferred. By having the out-of-line version be implemented in assembly, it cannot be instrumented with a stack protector, which might violate custom calling conventions that code like paravirt rely on. The semantics of extern inline has changed since gnu89. This means that folks using GCC versions >= 5.1 may see symbol redefinition errors at link time for subdirs that override KBUILD_CFLAGS (making the C standard used implicit) regardless of this patch. This has been cleaned up earlier in the patch set, but is left as a note in the commit message for future travelers. Reports: https://lkml.org/lkml/2018/5/7/534 https://github.com/ClangBuiltLinux/linux/issues/16 Discussion: https://bugs.llvm.org/show_bug.cgi?id=37512 https://lkml.org/lkml/2018/5/24/1371 Thanks to the many folks that participated in the discussion. [Backport for 4.4. 4.4 is missing commit 784d5699 "x86: move exports to actual definitions" which doesn't apply cleanly, and not really worth backporting IMO. It's simpler to change this patch from upstream: + #include <asm-generic/export.h> rather than + #include <asm/export.h>] Debugged-by:
Alistair Strachan <astrachan@google.com> Debugged-by:
Matthias Kaehlcke <mka@chromium.org> Suggested-by:
H. Peter Anvin <hpa@zytor.com> Suggested-by:
Tom Stellar <tstellar@redhat.com> Reported-by:
Sedat Dilek <sedat.dilek@gmail.com> Tested-by:
Nick Desaulniers <ndesaulniers@google.com> Acked-by:
Juergen Gross <jgross@suse.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: acme@redhat.com Cc: akataria@vmware.com Cc: akpm@linux-foundation.org Cc: andrea.parri@amarulasolutions.com Cc: ard.biesheuvel@linaro.org Cc: aryabinin@virtuozzo.com Cc: astrachan@google.com Cc: boris.ostrovsky@oracle.com Cc: brijesh.singh@amd.com Cc: caoj.fnst@cn.fujitsu.com Cc: geert@linux-m68k.org Cc: ghackmann@google.com Cc: gregkh@linuxfoundation.org Cc: jan.kiszka@siemens.com Cc: jarkko.sakkinen@linux.intel.com Cc: joe@perches.com Cc: jpoimboe@redhat.com Cc: keescook@google.com Cc: kirill.shutemov@linux.intel.com Cc: kstewart@linuxfoundation.org Cc: linux-efi@vger.kernel.org Cc: linux-kbuild@vger.kernel.org Cc: manojgupta@google.com Cc: mawilcox@microsoft.com Cc: michal.lkml@markovi.net Cc: mjg59@google.com Cc: mka@chromium.org Cc: pombredanne@nexb.com Cc: rientjes@google.com Cc: rostedt@goodmis.org Cc: thomas.lendacky@amd.com Cc: tweek@google.com Cc: virtualization@lists.linux-foundation.org Cc: will.deacon@arm.com Cc: yamada.masahiro@socionext.com Link: http://lkml.kernel.org/r/20180621162324.36656-4-ndesaulniers@google.comSigned-off-by:
-
Mathias Nyman authored
commit 229bc19f upstream. Don't rely on event interrupt (EINT) bit alone to detect pending port change in resume. If no change event is detected the host may be suspended again, oterwise roothubs are resumed. There is a lag in xHC setting EINT. If we don't notice the pending change in resume, and the controller is runtime suspeded again, it causes the event handler to assume host is dead as it will fail to read xHC registers once PCI puts the controller to D3 state. [ 268.520969] xhci_hcd: xhci_resume: starting port polling. [ 268.520985] xhci_hcd: xhci_hub_status_data: stopping port polling. [ 268.521030] xhci_hcd: xhci_suspend: stopping port polling. [ 268.521040] xhci_hcd: // Setting command ring address to 0x349bd001 [ 268.521139] xhci_hcd: Port Status Change Event for port 3 [ 268.521149] xhci_hcd: resume root hub [ 268.521163] xhci_hcd: port resume event for port 3 [ 268.521168] xhci_hcd: xHC is not running. [ 268.521174] xhci_hcd: handle_port_status: starting port polling. [ 268.596322] xhci_hcd: xhci_hc_died: xHCI host controller not responding, assume dead The EINT lag is described in a additional note in xhci specs 4.19.2: "Due to internal xHC scheduling and system delays, there will be a lag between a change bit being set and the Port Status Change Event that it generated being written to the Event Ring. If SW reads the PORTSC and sees a change bit set, there is no guarantee that the corresponding Port Status Change Event has already been written into the Event Ring." Cc: <stable@vger.kernel.org> Signed-off-by:
Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by:
Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit e78bfb07 ] Commit 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") introduced a different handling for the pfmemalloc flag in copy and clone paths. In __skb_clone(), now, the flag is set only if it was set in the original skb, but not cleared if it wasn't. This is wrong and might lead to socket buffers being flagged with pfmemalloc even if the skb data wasn't allocated from pfmemalloc reserves. Copy the flag instead of ORing it. Reported-by:
Sabrina Dubroca <sd@queasysnail.net> Fixes: 8b700862 ("net: Don't copy pfmemalloc flag in __copy_skb_header()") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Tested-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Stefano Brivio authored
[ Upstream commit 8b700862 ] The pfmemalloc flag indicates that the skb was allocated from the PFMEMALLOC reserves, and the flag is currently copied on skb copy and clone. However, an skb copied from an skb flagged with pfmemalloc wasn't necessarily allocated from PFMEMALLOC reserves, and on the other hand an skb allocated that way might be copied from an skb that wasn't. So we should not copy the flag on skb copy, and rather decide whether to allow an skb to be associated with sockets unrelated to page reclaim depending only on how it was allocated. Move the pfmemalloc flag before headers_start[0] using an existing 1-bit hole, so that __copy_skb_header() doesn't copy it. When cloning, we'll now take care of this flag explicitly, contravening to the warning comment of __skb_clone(). While at it, restore the newline usage introduced by commit b1937227 ("net: reorganize sk_buff for faster __copy_skb_header()") to visually separate bytes used in bitfields after headers_start[0], that was gone after commit a9e419dc ("netfilter: merge ctinfo into nfct pointer storage area"), and describe the pfmemalloc flag in the kernel-doc structure comment. This doesn't change the size of sk_buff or cacheline boundaries, but consolidates the 15 bits hole before tc_index into a 2 bytes hole before csum, that could now be filled more easily. Reported-by:
Patrick Talbert <ptalbert@redhat.com> Fixes: c93bdd0e ("netvm: allow skb allocation to use PFMEMALLOC reserves") Signed-off-by:
-
Sanjeev Bansal authored
[ Upstream commit 3a498606 ] This patch has fix for TX timeout while running bi-directional traffic with 100 Mbps using 5762. Signed-off-by:
Sanjeev Bansal <sanjeevb.bansal@broadcom.com> Signed-off-by:
Siva Reddy Kallam <siva.kallam@broadcom.com> Reviewed-by:
Michael Chan <michael.chan@broadcom.com> Signed-off-by:
-
Gustavo A. R. Silva authored
[ Upstream commit 9ba8376c ] It seems that a *break* is missing in order to avoid falling through to the default case. Otherwise, checking *chan* makes no sense. Fixes: 72df7a72 ("ptp: Allow reassigning calibration pin function") Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Acked-by:
Richard Cochran <richardcochran@gmail.com> Signed-off-by:
-
Heiner Kallweit authored
[ Upstream commit df8ed346 ] Currently also the pause flags are removed from phydev->supported because they're not included in PHY_DEFAULT_FEATURES. I don't think this is intended, especially when considering that this function can be called via phy_set_max_speed() anywhere in a driver. Change the masking to mask out only the values we're going to change. In addition remove the misleading comment, job of this small function is just to adjust the supported and advertised speeds. Fixes: f3a6bd39 ("phylib: Add phy_set_max_speed helper") Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
David Ahern authored
[ Upstream commit e7372197 ] Xin reported that icmp replies may not use the address on the device the echo request is received if the destination address is broadcast. Instead a route lookup is done without considering VRF context. Fix by setting oif in flow struct to the master device if it is enslaved. That directs the lookup to the VRF table. If the device is not enslaved, oif is still 0 so no affect. Fixes: cd2fbe1b ("net: Use VRF device index for lookups on RX") Reported-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Davidlohr Bueso authored
[ Upstream commit 107d01f5 ] rhashtable_init() currently does not take into account the user-passed min_size parameter unless param->nelem_hint is set as well. As such, the default size (number of buckets) will always be HASH_DEFAULT_SIZE even if the smallest allowed size is larger than that. Remediate this by unconditionally calling into rounded_hashtable_size() and handling things accordingly. Signed-off-by:
Davidlohr Bueso <dbueso@suse.de> Acked-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Colin Ian King authored
[ Upstream commit 169dc027 ] The rol32 call is currently rotating hash but the rol'd value is being discarded. I believe the current code is incorrect and hash should be assigned the rotated value returned from rol32. Thanks to David Lebrun for spotting this. Signed-off-by:
Colin Ian King <colin.king@canonical.com> Signed-off-by:
-
Tyler Hicks authored
[ Upstream commit 70ba5b6d ] The low and high values of the net.ipv4.ping_group_range sysctl were being silently forced to the default disabled state when a write to the sysctl contained GIDs that didn't map to the associated user namespace. Confusingly, the sysctl's write operation would return success and then a subsequent read of the sysctl would indicate that the low and high values are the overflowgid. This patch changes the behavior by clearly returning an error when the sysctl write operation receives a GID range that doesn't map to the associated user namespace. In such a situation, the previous value of the sysctl is preserved and that range will be returned in a subsequent read of the sysctl. Signed-off-by:
Tyler Hicks <tyhicks@canonical.com> Signed-off-by:
-
Jing Xia authored
commit 9f15bde6 upstream. It was reported that a kernel crash happened in mem_cgroup_iter(), which can be triggered if the legacy cgroup-v1 non-hierarchical mode is used. Unable to handle kernel paging request at virtual address 6b6b6b6b6b6b8f ...... Call trace: mem_cgroup_iter+0x2e0/0x6d4 shrink_zone+0x8c/0x324 balance_pgdat+0x450/0x640 kswapd+0x130/0x4b8 kthread+0xe8/0xfc ret_from_fork+0x10/0x20 mem_cgroup_iter(): ...... if (css_tryget(css)) <-- crash here break; ...... The crashing reason is that mem_cgroup_iter() uses the memcg object whose pointer is stored in iter->position, which has been freed before and filled with POISON_FREE(0x6b). And the root cause of the use-after-free issue is that invalidate_reclaim_iterators() fails to reset the value of iter->position to NULL when the css of the memcg is released in non- hierarchical mode. Link: http://lkml.kernel.org/r/1531994807-25639-1-git-send-email-jing.xia@unisoc.com Fixes: 6df38689 ("mm: memcontrol: fix possible memcg leak due to interrupted reclaim") Signed-off-by:
Jing Xia <jing.xia.mail@gmail.com> Acked-by:
Michal Hocko <mhocko@suse.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Vladimir Davydov <vdavydov.dev@gmail.com> Cc: <chunyan.zhang@unisoc.com> Cc: Shakeel Butt <shakeelb@google.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
Vineet Gupta authored
commit 93312b6d upstream. mprotect(EXEC) was failing for stack mappings as default vm flags was missing MAYEXEC. This was triggered by glibc test suite nptl/tst-execstack testcase What is surprising is that despite running LTP for years on, we didn't catch this issue as it lacks a directed test case. gcc dejagnu tests with nested functions also requiring exec stack work fine though because they rely on the GNU_STACK segment spit out by compiler and handled in kernel elf loader. This glibc case is different as the stack is non exec to begin with and a dlopen of shared lib with GNU_STACK segment triggers the exec stack proceedings using a mprotect(PROT_EXEC) which was broken. CC: stable@vger.kernel.org Signed-off-by:
Vineet Gupta <vgupta@synopsys.com> Signed-off-by:
-
Alexey Brodkin authored
commit 6e376114 upstream. swap was broken on ARC due to silly copy-paste issue. We encode offset from swapcache page in __swp_entry() as (off << 13) but were not decoding back in __swp_offset() as (off >> 13) - it was still (off << 13). This finally fixes swap usage on ARC. | # mkswap /dev/sda2 | | # swapon -a -e /dev/sda2 | Adding 500728k swap on /dev/sda2. Priority:-2 extents:1 across:500728k | | # free | total used free shared buffers cached | Mem: 765104 13456 751648 4736 8 4736 | -/+ buffers/cache: 8712 756392 | Swap: 500728 0 500728 Cc: stable@vger.kernel.org Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by:
-
Takashi Iwai authored
commit 39675f7a upstream. The SNDRV_RAWMIDI_IOCTL_PARAMS ioctl may resize the buffers and the current code is racy. For example, the sequencer client may write to buffer while it being resized. As a simple workaround, let's switch to the resized buffer inside the stream runtime lock. Reported-by: syzbot+52f83f0ea8df16932f7f@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Signed-off-by:
-
OGAWA Hirofumi authored
commit 35033ab9 upstream. In parse_options(), if match_strdup() failed, parse_options() leaves opts->iocharset in unexpected state (i.e. still pointing the freed string). And this can be the cause of double free. To fix, this initialize opts->iocharset always when freeing. Link: http://lkml.kernel.org/r/8736wp9dzc.fsf@mail.parknet.co.jpSigned-off-by:
OGAWA Hirofumi <hirofumi@mail.parknet.co.jp> Reported-by: syzbot+90b8e10515ae88228a92@syzkaller.appspotmail.com Cc: <stable@vger.kernel.org> Signed-off-by:
-
Dewet Thibaut authored
commit fbdb328c upstream. commit b3b7c479 ("x86/MCE: Serialize sysfs changes") introduced a min interval limitation when setting the check interval for polled MCEs. However, the logic is that 0 disables polling for corrected MCEs, see Documentation/x86/x86_64/machinecheck. The limitation prevents disabling. Remove this limitation and allow the value 0 to disable polling again. Fixes: b3b7c479 ("x86/MCE: Serialize sysfs changes") Signed-off-by:
Dewet Thibaut <thibaut.dewet@nokia.com> Signed-off-by:
Alexander Sverdlin <alexander.sverdlin@nokia.com> [ Massage commit message. ] Signed-off-by:
-
Lan Tianyu authored
commit b5020a8e upstream. Syzbot reports crashes in kvm_irqfd_assign(), caused by use-after-free when kvm_irqfd_assign() and kvm_irqfd_deassign() run in parallel for one specific eventfd. When the assign path hasn't finished but irqfd has been added to kvm->irqfds.items list, another thead may deassign the eventfd and free struct kvm_kernel_irqfd(). The assign path then uses the struct kvm_kernel_irqfd that has been freed by deassign path. To avoid such issue, keep irqfd under kvm->irq_srcu protection after the irqfd has been added to kvm->irqfds.items list, and call synchronize_srcu() in irq_shutdown() to make sure that irqfd has been fully initialized in the assign path. Reported-by:
Dmitry Vyukov <dvyukov@google.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
Tianyu Lan <tianyu.lan@intel.com> Cc: stable@vger.kernel.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
- 22 Jul, 2018 5 commits
-
-
Greg Kroah-Hartman authored
-
Tetsuo Handa authored
commit 3bc53be9 upstream. syzbot is reporting stalls at nfc_llcp_send_ui_frame() [1]. This is because nfc_llcp_send_ui_frame() is retrying the loop without any delay when nonblocking nfc_alloc_send_skb() returned NULL. Since there is no need to use MSG_DONTWAIT if we retry until sock_alloc_send_pskb() succeeds, let's use blocking call. Also, in case an unexpected error occurred, let's break the loop if blocking nfc_alloc_send_skb() failed. [1] https://syzkaller.appspot.com/bug?id=4a131cc571c3733e0eff6bc673f4e36ae48f19c6Signed-off-by:
Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp> Reported-by:
syzbot <syzbot+d29d18215e477cfbfbdd@syzkaller.appspotmail.com> Signed-off-by:
-
Santosh Shilimkar authored
commit f1693c63 upstream. Loop transport which is self loopback, remote port congestion update isn't relevant. Infact the xmit path already ignores it. Receive path needs to do the same. Reported-by: syzbot+4c20b3866171ce8441d2@syzkaller.appspotmail.com Reviewed-by:
Sowmini Varadhan <sowmini.varadhan@oracle.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
Eric Biggers authored
commit c604cb76 upstream. My recent fix for dns_resolver_preparse() printing very long strings was incomplete, as shown by syzbot which still managed to hit the WARN_ONCE() in set_precision() by adding a crafted "dns_resolver" key: precision 50001 too large WARNING: CPU: 7 PID: 864 at lib/vsprintf.c:2164 vsnprintf+0x48a/0x5a0 The bug this time isn't just a printing bug, but also a logical error when multiple options ("#"-separated strings) are given in the key payload. Specifically, when separating an option string into name and value, if there is no value then the name is incorrectly considered to end at the end of the key payload, rather than the end of the current option. This bypasses validation of the option length, and also means that specifying multiple options is broken -- which presumably has gone unnoticed as there is currently only one valid option anyway. A similar problem also applied to option values, as the kstrtoul() when parsing the "dnserror" option will read past the end of the current option and into the next option. Fix these bugs by correctly computing the length of the option name and by copying the option value, null-terminated, into a temporary buffer. Reproducer for the WARN_ONCE() that syzbot hit: perl -e 'print "#A#", "\0" x 50000' | keyctl padd dns_resolver desc @s Reproducer for "dnserror" option being parsed incorrectly (expected behavior is to fail when seeing the unknown option "foo", actual behavior was to read the dnserror value as "1#foo" and fail there): perl -e 'print "#dnserror=1#foo\0"' | keyctl padd dns_resolver desc @s Reported-by:
syzbot <syzkaller@googlegroups.com> Fixes: 4a2d7892 ("DNS: If the DNS server returns an error, allow that to be cached [ver #2]") Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Florian Westphal authored
commit 11ff7288 upstream. the ebtables evaluation loop expects targets to return positive values (jumps), or negative values (absolute verdicts). This is completely different from what xtables does. In xtables, targets are expected to return the standard netfilter verdicts, i.e. NF_DROP, NF_ACCEPT, etc. ebtables will consider these as jumps. Therefore reject any target found due to unspec fallback. v2: also reject watchers. ebtables ignores their return value, so a target that assumes skb ownership (and returns NF_STOLEN) causes use-after-free. The only watchers in the 'ebtables' front-end are log and nflog; both have AF_BRIDGE specific wrappers on kernel side. Reported-by: syzbot+2b43f681169a2a0d306a@syzkaller.appspotmail.com Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
