Pull btrfs fixes from David Sterba:
 "Regression fixes in zone activation:

   - move a loop invariant out of the loop to avoid checking space
     status

   - properly handle unlimited activation

  Other fixes:

   - for subpage, force the free space v2 mount to avoid a warning and
     make it easy to switch a filesystem on different page size systems

   - export sysfs status of exclusive operation 'balance paused', so the
     user space tools can recognize it and allow adding a device with
     paused balance

   - fix assertion failure when logging directory key range item"

* tag 'for-5.18-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: sysfs: export the balance paused state of exclusive operation
  btrfs: fix assertion failure when logging directory key range item
  btrfs: zoned: activate block group properly on unlimited active zone device
  btrfs: zoned: move non-changing condition check out of the loop
  btrfs: force v2 space cache usage for subpage mount

Pull NFS client fixes from Trond Myklebust:
 "Highlights include:

  Stable fixes:

   - Fix a socket leak when setting up an AF_LOCAL RPC client

   - Ensure that knfsd connects to the gss-proxy daemon on setup

  Bugfixes:

   - Fix a refcount leak when migrating a task off an offlined transport

   - Don't gratuitously invalidate inode attributes on delegation return

   - Don't leak sockets in xs_local_connect()

   - Ensure timely close of disconnected AF_LOCAL sockets"

* tag 'nfs-for-5.18-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs:
  Revert "SUNRPC: attempt AF_LOCAL connect on setup"
  SUNRPC: Ensure gss-proxy connects on setup
  SUNRPC: Ensure timely close of disconnected AF_LOCAL sockets
  SUNRPC: Don't leak sockets in xs_local_connect()
  NFSv4: Don't invalidate inode attributes on delegation return
  SUNRPC release the transport of a relocated task with an assigned transport

Pull kvm fixes from Paolo Bonzini:
 "x86:

   - Account for family 17h event renumberings in AMD PMU emulation

   - Remove CPUID leaf 0xA on AMD processors

   - Fix lockdep issue with locking all vCPUs

   - Fix loss of A/D bits in SPTEs

   - Fix syzkaller issue with invalid guest state"

* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: VMX: Exit to userspace if vCPU has injected exception and invalid state
  KVM: SEV: Mark nested locking of vcpu->lock
  kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU
  KVM: x86/svm: Account for family 17h event renumberings in amd_pmc_perf_hw_id
  KVM: x86/mmu: Use atomic XCHG to write TDP MMU SPTEs with volatile bits
  KVM: x86/mmu: Move shadow-present check out of spte_has_volatile_bits()
  KVM: x86/mmu: Don't treat fully writable SPTEs as volatile (modulo A/D)

Pull RISC-V fix from Palmer Dabbelt:

 - A fix to relocate the DTB early in boot, in cases where the
   bootloader doesn't put the DTB in a region that will end up
   mapped by the kernel.

   This manifests as a crash early in boot on a handful of
   configurations.

* tag 'riscv-for-linus-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  RISC-V: relocate DTB if it's outside memory region

Exit to userspace with an emulation error if KVM encounters an injected
exception with invalid guest state, in addition to the existing check of
bailing if there's a pending exception (KVM doesn't support emulating
exceptions except when emulating real mode via vm86).

In theory, KVM should never get to such a situation as KVM is supposed to
exit to userspace before injecting an exception with invalid guest state.
But in practice, userspace can intervene and manually inject an exception
and/or stuff registers to force invalid guest state while a previously
injected exception is awaiting reinjection.

Fixes: fc4fad79 ("KVM: VMX: Reject KVM_RUN if emulation is required with pending exception")
Reported-by: syzbot+cfafed3bb76d3e37581b@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220502221850.131873-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

svm_vm_migrate_from() uses sev_lock_vcpus_for_migration() to lock all
source and target vcpu->locks. Unfortunately there is an 8 subclass
limit, so a new subclass cannot be used for each vCPU. Instead maintain
ownership of the first vcpu's mutex.dep_map using a role specific
subclass: source vs target. Release the other vcpu's mutex.dep_maps.

Fixes: b5663931 ("KVM: SEV: Add support for SEV intra host migration")
Reported-by: John Sperbeck<jsperbeck@google.com>
Suggested-by: David Rientjes <rientjes@google.com>
Suggested-by: Sean Christopherson <seanjc@google.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Hillf Danton <hdanton@sina.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Peter Gonda <pgonda@google.com>

Message-Id: <20220502165807.529624-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Pull rdma fixes from Jason Gunthorpe:
 "A few recent regressions in rxe's multicast code, and some old driver
  bugs:

   - Error case unwind bug in rxe for rkeys

   - Dot not call netdev functions under a spinlock in rxe multicast
     code

   - Use the proper BH lock type in rxe multicast code

   - Fix idrma deadlock and crash

   - Add a missing flush to drain irdma QPs when in error

   - Fix high userspace latency in irdma during destroy due to
     synchronize_rcu()

   - Rare race in siw MPA processing"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
  RDMA/rxe: Change mcg_lock to a _bh lock
  RDMA/rxe: Do not call  dev_mc_add/del() under a spinlock
  RDMA/siw: Fix a condition race issue in MPA request processing
  RDMA/irdma: Fix possible crash due to NULL netdev in notifier
  RDMA/irdma: Reduce iWARP QP destroy time
  RDMA/irdma: Flush iWARP QP if modified to ERR from RTR state
  RDMA/rxe: Recheck the MR in when generating a READ reply
  RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core()
  RDMA/rxe: Fix "Replace mr by rkey in responder resources"

Pull mmc fixes from Ulf Hansson:
 "MMC core:

   - Fix initialization for eMMC's HS200/HS400 mode

  MMC host:

   - sdhci-msm: Reset GCC_SDCC_BCR register to prevent timeout issues

   - sunxi-mmc: Fix DMA descriptors allocated above 32 bits"

* tag 'mmc-v5.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC
  mmc: sunxi-mmc: Fix DMA descriptors allocated above 32 bits
  mmc: core: Set HS clock speed before sending HS CMD13

Pull drm fixes from Dave Airlie:
 "A pretty quiet week, one fbdev, msm, kconfig, and two amdgpu fixes,
  about what I'd expect for rc6.

  fbdev:

   - hotunplugging fix

  amdgpu:

   - Fix a xen dom0 regression on APUs

   - Fix a potential array overflow if a receiver were to send an
     erroneous audio channel count

  msm:

   - lockdep fix.

  it6505:

   - kconfig fix"

* tag 'drm-fixes-2022-05-06' of git://anongit.freedesktop.org/drm/drm:
  drm/amd/display: Avoid reading audio pattern past AUDIO_CHANNELS_COUNT
  drm/amdgpu: do not use passthrough mode in Xen dom0
  drm/bridge: ite-it6505: add missing Kconfig option select
  fbdev: Make fb_release() return -ENODEV if fbdev was unregistered
  drm/msm/dp: remove fail safe mode related code

single lockdep fix.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGtkzqzxDLp82OaKXVrWd7nWZtkxKsuOK1wOGCDz7qF-dA@mail.gmail.com

drm-misc-fixes for v5.18-rc6:
- Small fix for hot-unplugging fb devices.
- Kconfig fix for it6505.
Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/69e51773-8c6f-4ff7-9a06-5c2922a43999@linux.intel.com

Merge tag 'amd-drm-fixes-5.18-2022-05-04' of https://gitlab.freedesktop.org/agd5f/linux into drm-fixes

amd-drm-fixes-5.18-2022-05-04:

amdgpu:
- Fix a xen dom0 regression on APUs
- Fix a potential array overflow if a receiver were to
  send an erroneous audio channel count
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220504190439.5723-1-alexander.deucher@amd.com

Pull folio fixes from Matthew Wilcox:
 "Two folio fixes for 5.18.

  Darrick and Brian have done amazing work debugging the race I created
  in the folio BIO iterator. The readahead problem was deterministic, so
  easy to fix.

   - Fix a race when we were calling folio_next() in the BIO folio iter
     without holding a reference, meaning the folio could be split or
     freed, and we'd jump to the next page instead of the intended next
     folio.

   - Fix readahead creating single-page folios instead of the intended
     large folios when doing reads that are not a power of two in size"

* tag 'folio-5.18f' of git://git.infradead.org/users/willy/pagecache:
  mm/readahead: Fix readahead with large folios
  block: Do not call folio_next() on an unreferenced folio

Pull devicetree fixes from Rob Herring:

 - Drop unused 'max-link-speed' in Apple PCIe

 - More redundant 'maxItems/minItems' schema fixes

 - Support values for pinctrl 'drive-push-pull' and 'drive-open-drain'

 - Fix redundant 'unevaluatedProperties' in MT6360 LEDs binding

 - Add missing 'power-domains' property to Cadence UFSHC

* tag 'devicetree-fixes-for-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
  dt-bindings: pci: apple,pcie: Drop max-link-speed from example
  dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
  dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
  dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
  dt-bindings: ufs: cdns,ufshc: Add power-domains

The new state allowing device addition with paused balance is not
exported to user space so it can't recognize it and actually start the
operation.

Fixes: efc0e69c ("btrfs: introduce exclusive operation BALANCE_PAUSED state")
CC: stable@vger.kernel.org # 5.17
Signed-off-by: David Sterba <dsterba@suse.com>

When inserting a key range item (BTRFS_DIR_LOG_INDEX_KEY) while logging
a directory, we don't expect the insertion to fail with -EEXIST, because
we are holding the directory's log_mutex and we have dropped all existing
BTRFS_DIR_LOG_INDEX_KEY keys from the log tree before we started to log
the directory. However it's possible that during the logging we attempt
to insert the same BTRFS_DIR_LOG_INDEX_KEY key twice, but for this to
happen we need to race with insertions of items from other inodes in the
subvolume's tree while we are logging a directory. Here's how this can
happen:

1) We are logging a directory with inode number 1000 that has its items
   spread across 3 leaves in the subvolume's tree:

   leaf A - has index keys from the range 2 to 20 for example. The last
   item in the leaf corresponds to a dir item for index number 20. All
   these dir items were created in a past transaction.

   leaf B - has index keys from the range 22 to 100 for example. It has
   no keys from other inodes, all its keys are dir index keys for our
   directory inode number 1000. Its first key is for the dir item with
   a sequence number of 22. All these dir items were also created in a
   past transaction.

   leaf C - has index keys for our directory for the range 101 to 120 for
   example. This leaf also has items from other inodes, and its first
   item corresponds to the dir item for index number 101 for our directory
   with inode number 1000;

2) When we finish processing the items from leaf A at log_dir_items(),
   we log a BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and a last
   offset of 21, meaning the log is authoritative for the index range
   from 21 to 21 (a single sequence number). At this point leaf B was
   not yet modified in the current transaction;

3) When we return from log_dir_items() we have released our read lock on
   leaf B, and have set *last_offset_ret to 21 (index number of the first
   item on leaf B minus 1);

4) Some other task inserts an item for other inode (inode number 1001 for
   example) into leaf C. That resulted in pushing some items from leaf C
   into leaf B, in order to make room for the new item, so now leaf B
   has dir index keys for the sequence number range from 22 to 102 and
   leaf C has the dir items for the sequence number range 103 to 120;

5) At log_directory_changes() we call log_dir_items() again, passing it
   a 'min_offset' / 'min_key' value of 22 (*last_offset_ret from step 3
   plus 1, so 21 + 1). Then btrfs_search_forward() leaves us at slot 0
   of leaf B, since leaf B was modified in the current transaction.

   We have also initialized 'last_old_dentry_offset' to 20 after calling
   btrfs_previous_item() at log_dir_items(), as it left us at the last
   item of leaf A, which refers to the dir item with sequence number 20;

6) We then call process_dir_items_leaf() to process the dir items of
   leaf B, and when we process the first item, corresponding to slot 0,
   sequence number 22, we notice the dir item was created in a past
   transaction and its sequence number is greater than the value of
   *last_old_dentry_offset + 1 (20 + 1), so we decide to log again a
   BTRFS_DIR_LOG_INDEX_KEY key with an offset of 21 and an end range
   of 21 (key.offset - 1 == 22 - 1 == 21), which results in an -EEXIST
   error from insert_dir_log_key(), as we have already inserted that
   key at step 2, triggering the assertion at process_dir_items_leaf().

The trace produced in dmesg is like the following:

assertion failed: ret != -EEXIST, in fs/btrfs/tree-log.c:3857
[198255.980839][ T7460] ------------[ cut here ]------------
[198255.981666][ T7460] kernel BUG at fs/btrfs/ctree.h:3617!
[198255.983141][ T7460] invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI
[198255.984080][ T7460] CPU: 0 PID: 7460 Comm: repro-ghost-dir Not tainted 5.18.0-5314c78ac373-misc-next+
[198255.986027][ T7460] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-2 04/01/2014
[198255.988600][ T7460] RIP: 0010:assertfail.constprop.0+0x1c/0x1e
[198255.989465][ T7460] Code: 8b 4c 89 (...)
[198255.992599][ T7460] RSP: 0018:ffffc90007387188 EFLAGS: 00010282
[198255.993414][ T7460] RAX: 000000000000003d RBX: 0000000000000065 RCX: 0000000000000000
[198255.996056][ T7460] RDX: 0000000000000001 RSI: ffffffff8b62b180 RDI: fffff52000e70e24
[198255.997668][ T7460] RBP: ffffc90007387188 R08: 000000000000003d R09: ffff8881f0e16507
[198255.999199][ T7460] R10: ffffed103e1c2ca0 R11: 0000000000000001 R12: 00000000ffffffef
[198256.000683][ T7460] R13: ffff88813befc630 R14: ffff888116c16e70 R15: ffffc90007387358
[198256.007082][ T7460] FS:  00007fc7f7c24640(0000) GS:ffff8881f0c00000(0000) knlGS:0000000000000000
[198256.009939][ T7460] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[198256.014133][ T7460] CR2: 0000560bb16d0b78 CR3: 0000000140b34005 CR4: 0000000000170ef0
[198256.015239][ T7460] Call Trace:
[198256.015674][ T7460]  <TASK>
[198256.016313][ T7460]  log_dir_items.cold+0x16/0x2c
[198256.018858][ T7460]  ? replay_one_extent+0xbf0/0xbf0
[198256.025932][ T7460]  ? release_extent_buffer+0x1d2/0x270
[198256.029658][ T7460]  ? rcu_read_lock_sched_held+0x16/0x80
[198256.031114][ T7460]  ? lock_acquired+0xbe/0x660
[198256.032633][ T7460]  ? rcu_read_lock_sched_held+0x16/0x80
[198256.034386][ T7460]  ? lock_release+0xcf/0x8a0
[198256.036152][ T7460]  log_directory_changes+0xf9/0x170
[198256.036993][ T7460]  ? log_dir_items+0xba0/0xba0
[198256.037661][ T7460]  ? do_raw_write_unlock+0x7d/0xe0
[198256.038680][ T7460]  btrfs_log_inode+0x233b/0x26d0
[198256.041294][ T7460]  ? log_directory_changes+0x170/0x170
[198256.042864][ T7460]  ? btrfs_attach_transaction_barrier+0x60/0x60
[198256.045130][ T7460]  ? rcu_read_lock_sched_held+0x16/0x80
[198256.046568][ T7460]  ? lock_release+0xcf/0x8a0
[198256.047504][ T7460]  ? lock_downgrade+0x420/0x420
[198256.048712][ T7460]  ? ilookup5_nowait+0x81/0xa0
[198256.049747][ T7460]  ? lock_downgrade+0x420/0x420
[198256.050652][ T7460]  ? do_raw_spin_unlock+0xa9/0x100
[198256.051618][ T7460]  ? __might_resched+0x128/0x1c0
[198256.052511][ T7460]  ? __might_sleep+0x66/0xc0
[198256.053442][ T7460]  ? __kasan_check_read+0x11/0x20
[198256.054251][ T7460]  ? iget5_locked+0xbd/0x150
[198256.054986][ T7460]  ? run_delayed_iput_locked+0x110/0x110
[198256.055929][ T7460]  ? btrfs_iget+0xc7/0x150
[198256.056630][ T7460]  ? btrfs_orphan_cleanup+0x4a0/0x4a0
[198256.057502][ T7460]  ? free_extent_buffer+0x13/0x20
[198256.058322][ T7460]  btrfs_log_inode+0x2654/0x26d0
[198256.059137][ T7460]  ? log_directory_changes+0x170/0x170
[198256.060020][ T7460]  ? rcu_read_lock_sched_held+0x16/0x80
[198256.060930][ T7460]  ? rcu_read_lock_sched_held+0x16/0x80
[198256.061905][ T7460]  ? lock_contended+0x770/0x770
[198256.062682][ T7460]  ? btrfs_log_inode_parent+0xd04/0x1750
[198256.063582][ T7460]  ? lock_downgrade+0x420/0x420
[198256.064432][ T7460]  ? preempt_count_sub+0x18/0xc0
[198256.065550][ T7460]  ? __mutex_lock+0x580/0xdc0
[198256.066654][ T7460]  ? stack_trace_save+0x94/0xc0
[198256.068008][ T7460]  ? __kasan_check_write+0x14/0x20
[198256.072149][ T7460]  ? __mutex_unlock_slowpath+0x12a/0x430
[198256.073145][ T7460]  ? mutex_lock_io_nested+0xcd0/0xcd0
[198256.074341][ T7460]  ? wait_for_completion_io_timeout+0x20/0x20
[198256.075345][ T7460]  ? lock_downgrade+0x420/0x420
[198256.076142][ T7460]  ? lock_contended+0x770/0x770
[198256.076939][ T7460]  ? do_raw_spin_lock+0x1c0/0x1c0
[198256.078401][ T7460]  ? btrfs_sync_file+0x5e6/0xa40
[198256.080598][ T7460]  btrfs_log_inode_parent+0x523/0x1750
[198256.081991][ T7460]  ? wait_current_trans+0xc8/0x240
[198256.083320][ T7460]  ? lock_downgrade+0x420/0x420
[198256.085450][ T7460]  ? btrfs_end_log_trans+0x70/0x70
[198256.086362][ T7460]  ? rcu_read_lock_sched_held+0x16/0x80
[198256.087544][ T7460]  ? lock_release+0xcf/0x8a0
[198256.088305][ T7460]  ? lock_downgrade+0x420/0x420
[198256.090375][ T7460]  ? dget_parent+0x8e/0x300
[198256.093538][ T7460]  ? do_raw_spin_lock+0x1c0/0x1c0
[198256.094918][ T7460]  ? lock_downgrade+0x420/0x420
[198256.097815][ T7460]  ? do_raw_spin_unlock+0xa9/0x100
[198256.101822][ T7460]  ? dget_parent+0xb7/0x300
[198256.103345][ T7460]  btrfs_log_dentry_safe+0x48/0x60
[198256.105052][ T7460]  btrfs_sync_file+0x629/0xa40
[198256.106829][ T7460]  ? start_ordered_ops.constprop.0+0x120/0x120
[198256.109655][ T7460]  ? __fget_files+0x161/0x230
[198256.110760][ T7460]  vfs_fsync_range+0x6d/0x110
[198256.111923][ T7460]  ? start_ordered_ops.constprop.0+0x120/0x120
[198256.113556][ T7460]  __x64_sys_fsync+0x45/0x70
[198256.114323][ T7460]  do_syscall_64+0x5c/0xc0
[198256.115084][ T7460]  ? syscall_exit_to_user_mode+0x3b/0x50
[198256.116030][ T7460]  ? do_syscall_64+0x69/0xc0
[198256.116768][ T7460]  ? do_syscall_64+0x69/0xc0
[198256.117555][ T7460]  ? do_syscall_64+0x69/0xc0
[198256.118324][ T7460]  ? sysvec_call_function_single+0x57/0xc0
[198256.119308][ T7460]  ? asm_sysvec_call_function_single+0xa/0x20
[198256.120363][ T7460]  entry_SYSCALL_64_after_hwframe+0x44/0xae
[198256.121334][ T7460] RIP: 0033:0x7fc7fe97b6ab
[198256.122067][ T7460] Code: 0f 05 48 (...)
[198256.125198][ T7460] RSP: 002b:00007fc7f7c23950 EFLAGS: 00000293 ORIG_RAX: 000000000000004a
[198256.126568][ T7460] RAX: ffffffffffffffda RBX: 00007fc7f7c239f0 RCX: 00007fc7fe97b6ab
[198256.127942][ T7460] RDX: 0000000000000002 RSI: 000056167536bcf0 RDI: 0000000000000004
[198256.129302][ T7460] RBP: 0000000000000004 R08: 0000000000000000 R09: 000000007ffffeb8
[198256.130670][ T7460] R10: 00000000000001ff R11: 0000000000000293 R12: 0000000000000001
[198256.132046][ T7460] R13: 0000561674ca8140 R14: 00007fc7f7c239d0 R15: 000056167536dab8
[198256.133403][ T7460]  </TASK>

Fix this by treating -EEXIST as expected at insert_dir_log_key() and have
it update the item with an end offset corresponding to the maximum between
the previously logged end offset and the new requested end offset. The end
offsets may be different due to dir index key deletions that happened as
part of unlink operations while we are logging a directory (triggered when
fsyncing some other inode parented by the directory) or during renames
which always attempt to log a single dir index deletion.
Reported-by: Zygo Blaxell <ce3g8jdj@umail.furryterror.org>
Link: https://lore.kernel.org/linux-btrfs/YmyefE9mc2xl5ZMz@hungrycats.org/
Fixes: 732d591a ("btrfs: stop copying old dir items when logging a directory")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_zone_activate() checks if it activated all the underlying zones in
the loop. However, that check never hit on an unlimited activate zone
device (max_active_zones == 0).

Fortunately, it still works without ENOSPC because btrfs_zone_activate()
returns true in the end, even if block_group->zone_is_active == 0. But, it
is confusing to have non zone_is_active block group still usable for
allocation. Also, we are wasting CPU time to iterate the loop every time
btrfs_zone_activate() is called for the blog groups.

Since error case in the loop is handled by out_unlock, we can just set
zone_is_active and do the list stuff after the loop.

Fixes: f9a912a3 ("btrfs: zoned: make zone activation multi stripe capable")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

btrfs_zone_activate() checks if block_group->alloc_offset ==
block_group->zone_capacity every time it iterates the loop. But, it is
not depending on the index. Move out the check and do it only once.

Fixes: f9a912a3 ("btrfs: zoned: make zone activation multi stripe capable")
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>

[BUG]
For a 4K sector sized btrfs with v1 cache enabled and only mounted on
systems with 4K page size, if it's mounted on subpage (64K page size)
systems, it can cause the following warning on v1 space cache:

 BTRFS error (device dm-1): csum mismatch on free space cache
 BTRFS warning (device dm-1): failed to load free space cache for block group 84082688, rebuilding it now

Although not a big deal, as kernel can rebuild it without problem, such
warning will bother end users, especially if they want to switch the
same btrfs seamlessly between different page sized systems.

[CAUSE]
V1 free space cache is still using fixed PAGE_SIZE for various bitmap,
like BITS_PER_BITMAP.

Such hard-coded PAGE_SIZE usage will cause various mismatch, from v1
cache size to checksum.

Thus kernel will always reject v1 cache with a different PAGE_SIZE with
csum mismatch.

[FIX]
Although we should fix v1 cache, it's already going to be marked
deprecated soon.

And we have v2 cache based on metadata (which is already fully subpage
compatible), and it has almost everything superior than v1 cache.

So just force subpage mount to use v2 cache on mount.
Reported-by: Matt Corallo <blnxfsl@bluematt.me>
CC: stable@vger.kernel.org # 5.15+
Link: https://lore.kernel.org/linux-btrfs/61aa27d1-30fc-c1a9-f0f4-9df544395ec3@bluematt.me/Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>

Pull s390 fixes from Heiko Carstens:

 - Disable -Warray-bounds warning for gcc12, since the only known way to
   workaround false positive warnings on lowcore accesses would result
   in worse code on fast paths.

 - Avoid lockdep_assert_held() warning in kvm vm memop code.

 - Reduce overhead within gmap_rmap code to get rid of long latencies
   when e.g. shutting down 2nd level guests.

* tag 's390-5.18-4' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
  KVM: s390: vsie/gmap: reduce gmap_rmap overhead
  KVM: s390: Fix lockdep issue in vm memop
  s390: disable -Warray-bounds

Pull MIPS fix from Thomas Bogendoerfer:
 "Extend R4000/R4400 CPU erratum workaround to all revisions"

* tag 'mips-fixes_5.18_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
  MIPS: Fix CP0 counter erratum detection for R4k CPUs

Pull networking fixes from Paolo Abeni:
 "Including fixes from can, rxrpc and wireguard.

  Previous releases - regressions:

   - igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()

   - mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()

   - rds: acquire netns refcount on TCP sockets

   - rxrpc: enable IPv6 checksums on transport socket

   - nic: hinic: fix bug of wq out of bound access

   - nic: thunder: don't use pci_irq_vector() in atomic context

   - nic: bnxt_en: fix possible bnxt_open() failure caused by wrong RFS
     flag

   - nic: mlx5e:
      - lag, fix use-after-free in fib event handler
      - fix deadlock in sync reset flow

  Previous releases - always broken:

   - tcp: fix insufficient TCP source port randomness

   - can: grcan: grcan_close(): fix deadlock

   - nfc: reorder destructive operations in to avoid bugs

  Misc:

   - wireguard: improve selftests reliability"

* tag 'net-5.18-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (63 commits)
  NFC: netlink: fix sleep in atomic bug when firmware download timeout
  selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
  tcp: drop the hash_32() part from the index calculation
  tcp: increase source port perturb table to 2^16
  tcp: dynamically allocate the perturb table used by source ports
  tcp: add small random increments to the source port
  tcp: resalt the secret every 10 seconds
  tcp: use different parts of the port_offset for index and offset
  secure_seq: use the 64 bits of the siphash for port offset calculation
  wireguard: selftests: set panic_on_warn=1 from cmdline
  wireguard: selftests: bump package deps
  wireguard: selftests: restore support for ccache
  wireguard: selftests: use newer toolchains to fill out architectures
  wireguard: selftests: limit parallelism to $(nproc) tests at once
  wireguard: selftests: make routing loop test non-fatal
  net/mlx5: Fix matching on inner TTC
  net/mlx5: Avoid double clear or set of sync reset requested
  net/mlx5: Fix deadlock in sync reset flow
  net/mlx5e: Fix trust state reset in reload
  net/mlx5e: Avoid checking offload capability in post_parse action
  ...

There are sleep in atomic bug that could cause kernel panic during
firmware download process. The root cause is that nlmsg_new with
GFP_KERNEL parameter is called in fw_dnld_timeout which is a timer
handler. The call trace is shown below:

BUG: sleeping function called from invalid context at include/linux/sched/mm.h:265
Call Trace:
kmem_cache_alloc_node
__alloc_skb
nfc_genl_fw_download_done
call_timer_fn
__run_timers.part.0
run_timer_softirq
__do_softirq
...

The nlmsg_new with GFP_KERNEL parameter may sleep during memory
allocation process, and the timer handler is run as the result of
a "software interrupt" that should not call any other function
that could sleep.

This patch changes allocation mode of netlink message from GFP_KERNEL
to GFP_ATOMIC in order to prevent sleep in atomic bug. The GFP_ATOMIC
flag makes memory allocation operation could be used in atomic context.

Fixes: 9674da87 ("NFC: Add firmware upload netlink command")
Fixes: 9ea7187c ("NFC: netlink: Rename CMD_FW_UPLOAD to CMD_FW_DOWNLOAD")
Signed-off-by: Duoming Zhou <duoming@zju.edu.cn>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220504055847.38026-1-duoming@zju.edu.cnSigned-off-by: Paolo Abeni <pabeni@redhat.com>

Reading 100KB chunks from a big file (eg dd bs=100K) leads to poor
readahead behaviour.  Studying the traces in detail, I noticed two
problems.

The first is that we were setting the readahead flag on the folio which
contains the last byte read from the block.  This is wrong because we
will trigger readahead at the end of the read without waiting to see
if a subsequent read is going to use the pages we just read.  Instead,
we need to set the readahead flag on the first folio _after_ the one
which contains the last byte that we're reading.

The second is that we were looking for the index of the folio with the
readahead flag set to exactly match the start + size - async_size.
If we've rounded this, either down (as previously) or up (as now),
we'll think we hit a folio marked as readahead by a different read,
and try to read the wrong pages.  So round the expected index to the
order of the folio we hit.
Reported-by: Guo Xuenan <guoxuenan@huawei.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

It is unsafe to call folio_next() on a folio unless you hold a reference
on it that prevents it from being split or freed.  After returning
from the iterator, iomap calls folio_end_writeback() which may drop
the last reference to the page, or allow the page to be split.  If that
happens, the iterator will not advance far enough through the bio_vec,
leading to assertion failures like the BUG() in folio_end_writeback()
that checks we're not trying to end writeback on a page not currently
under writeback.  Other assertion failures were also seen, but they're
all explained by this one bug.

Fix the bug by remembering where the next folio starts before returning
from the iterator.  There are other ways of fixing this bug, but this
seems the simplest.
Reported-by: Darrick J. Wong <djwong@kernel.org>
Tested-by: Darrick J. Wong <djwong@kernel.org>
Reported-by: Brian Foster <bfoster@redhat.com>
Tested-by: Brian Foster <bfoster@redhat.com>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>

As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/

the default conform-exceed action is "reclassify", for a reason we don't
really understand.

The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.

Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.

Fixes: 8cd6b020 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Willy Tarreau says:

====================
insufficient TCP source port randomness

In a not-yet published paper, Moshe Kol, Amit Klein, and Yossi Gilad
report being able to accurately identify a client by forcing it to emit
only 40 times more connections than the number of entries in the
table_perturb[] table, which is indexed by hashing the connection tuple.
The current 2^8 setting allows them to perform that attack with only 10k
connections, which is not hard to achieve in a few seconds.

Eric, Amit and I have been working on this for a few weeks now imagining,
testing and eliminating a number of approaches that Amit and his team were
still able to break or that were found to be too risky or too expensive,
and ended up with the simple improvements in this series that resists to
the attack, doesn't degrade the performance, and preserves a reliable port
selection algorithm to avoid connection failures, including the odd/even
port selection preference that allows bind() to always find a port quickly
even under strong connect() stress.

The approach relies on several factors:
  - resalting the hash secret that's used to choose the table_perturb[]
    entry every 10 seconds to eliminate slow attacks and force the
    attacker to forget everything that was learned after this delay.
    This already eliminates most of the problem because if a client
    stays silent for more than 10 seconds there's no link between the
    previous and the next patterns, and 10s isn't yet frequent enough
    to cause too frequent repetition of a same port that may induce a
    connection failure ;

  - adding small random increments to the source port. Previously, a
    random 0 or 1 was added every 16 ports. Now a random 0 to 7 is
    added after each port. This means that with the default 32768-60999
    range, a worst case rollover happens after 1764 connections, and
    an average of 3137. This doesn't stop statistical attacks but
    requires significantly more iterations of the same attack to
    confirm a guess.

  - increasing the table_perturb[] size from 2^8 to 2^16, which Amit
    says will require 2.6 million connections to be attacked with the
    changes above, making it pointless to get a fingerprint that will
    only last 10 seconds. Due to the size, the table was made dynamic.

  - a few minor improvements on the bits used from the hash, to eliminate
    some unfortunate correlations that may possibly have been exploited
    to design future attack models.

These changes were tested under the most extreme conditions, up to
1.1 million connections per second to one and a few targets, showing no
performance regression, and only 2 connection failures within 13 billion,
which is less than 2^-32 and perfectly within usual values.

The series is split into small reviewable changes and was already reviewed
by Amit and Eric.
====================

Link: https://lore.kernel.org/r/20220502084614.24123-1-w@1wt.euSigned-off-by: Jakub Kicinski <kuba@kernel.org>

In commit 190cc824 ("tcp: change source port randomizarion at
connect() time"), the table_perturb[] array was introduced and an
index was taken from the port_offset via hash_32(). But it turns
out that hash_32() performs a multiplication while the input here
comes from the output of SipHash in secure_seq, that is well
distributed enough to avoid the need for yet another hash.
Suggested-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Moshe Kol, Amit Klein, and Yossi Gilad reported being able to accurately
identify a client by forcing it to emit only 40 times more connections
than there are entries in the table_perturb[] table. The previous two
improvements consisting in resalting the secret every 10s and adding
randomness to each port selection only slightly improved the situation,
and the current value of 2^8 was too small as it's not very difficult
to make a client emit 10k connections in less than 10 seconds.

Thus we're increasing the perturb table from 2^8 to 2^16 so that the
same precision now requires 2.6M connections, which is more difficult in
this time frame and harder to hide as a background activity. The impact
is that the table now uses 256 kB instead of 1 kB, which could mostly
affect devices making frequent outgoing connections. However such
components usually target a small set of destinations (load balancers,
database clients, perf assessment tools), and in practice only a few
entries will be visited, like before.

A live test at 1 million connections per second showed no performance
difference from the previous value.
Reported-by: Moshe Kol <moshe.kol@mail.huji.ac.il>
Reported-by: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Reported-by: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

We'll need to further increase the size of this table and it's likely
that at some point its size will not be suitable anymore for a static
table. Let's allocate it on boot from inet_hashinfo2_init(), which is
called from tcp_init().

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Here we're randomly adding between 0 and 7 random increments to the
selected source port in order to add some noise in the source port
selection that will make the next port less predictable.

With the default port range of 32768-60999 this means a worst case
reuse scenario of 14116/8=1764 connections between two consecutive
uses of the same port, with an average of 14116/4.5=3137. This code
was stressed at more than 800000 connections per second to a fixed
target with all connections closed by the client using RSTs (worst
condition) and only 2 connections failed among 13 billion, despite
the hash being reseeded every 10 seconds, indicating a perfectly
safe situation.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

In order to limit the ability for an observer to recognize the source
ports sequence used to contact a set of destinations, we should
periodically shuffle the secret. 10 seconds looks effective enough
without causing particular issues.

Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Tested-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Amit Klein suggests that we use different parts of port_offset for the
table's index and the port offset so that there is no direct relation
between them.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

SipHash replaced MD5 in secure_ipv{4,6}_port_ephemeral() via commit
7cd23e53 ("secure_seq: use SipHash in place of MD5"), but the output
remained truncated to 32-bit only. In order to exploit more bits from the
hash, let's make the functions return the full 64-bit of siphash_3u32().
We also make sure the port offset calculation in __inet_hash_connect()
remains done on 32-bit to avoid the need for div_u64_rem() and an extra
cost on 32-bit systems.

Cc: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: Moshe Kol <moshe.kol@mail.huji.ac.il>
Cc: Yossi Gilad <yossi.gilad@mail.huji.ac.il>
Cc: Amit Klein <aksecurity@gmail.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Jason A. Donenfeld says:

====================
wireguard patches for 5.18-rc6

In working on some other problems, I wound up leaning on the WireGuard
CI more than usual and uncovered a few small issues with reliability.
These are fairly low key changes, since they don't impact kernel code
itself.

One change does stick out in particular, though, which is the "make
routing loop test non-fatal" commit. I'm not thrilled about doing this,
but currently [1] remains unsolved, and I'm still working on a real
solution to that (hopefully for 5.19 or 5.20 if I can come up with a
good idea...), so for now that test just prints a big red warning
instead.

[1] https://lore.kernel.org/netdev/YmszSXueTxYOC41G@zx2c4.com/
====================

Link: https://lore.kernel.org/r/20220504202920.72908-1-Jason@zx2c4.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than setting this once init is running, set panic_on_warn from
the kernel command line, so that it catches splats from WireGuard
initialization code and the various crypto selftests.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Use newer, more reliable package dependencies. These should hopefully
reduce flakes. However, we keep the old iputils package, as it
accumulated bugs after resulting in flakes on slow machines.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When moving to non-system toolchains, we inadvertantly killed the
ability to use ccache. So instead, build ccache support into the test
harness directly.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Rather than relying on the system to have cross toolchains available,
simply download musl.cc's ones and use that libc.so, and then we use it
to fill in a few missing platforms, such as riscv64, riscv64, powerpc64,
and s390x.

Since riscv doesn't have a second serial port in its device description,
we have to use virtio's vport. This is actually the same situation on
ARM, but we were previously hacking QEMU up to work around this, which
required a custom QEMU. Instead just do the vport trick on ARM too.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

The parallel tests were added to catch queueing issues from multiple
cores. But what happens in reality when testing tons of processes is
that these separate threads wind up fighting with the scheduler, and we
wind up with contention in places we don't care about that decrease the
chances of hitting a bug. So just do a test with the number of CPU
cores, rather than trying to scale up arbitrarily.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>