Thanks to preempt-to-busy, we leave the request on the HW as we submit
the preemption request. This means that the request may complete at any
moment as we process HW events, and in particular the request may be
retired as we are planning to capture it for a preemption timeout.

Be more careful while obtaining the request to capture after a
preemption timeout, and check to see if it completed before we were able
to put it on the on-hold list. If we do see it did complete just before
we capture the request, proclaim the preemption-timeout a false positive
and pardon the reset as we should hit an arbitration point momentarily
and so be able to process the preemption.

Note that even after we move the request to be on hold it may be retired
(as the reset to stop the HW comes after), so we do require to hold our
own reference as we work on the request for capture (and all of the
peeking at state within the request needs to be carefully protected).

Fixes: 32ff621f ("drm/i915/gt: Allow temporary suspension of inflight requests")
Closes: https://gitlab.freedesktop.org/drm/intel/issues/997Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122140243.495621-1-chris@chris-wilson.co.uk

We have two trace messages that rely on the function name for
distinction. However, if gcc inlines the function, the two traces end up
with the same function name and are indistinguishable. Add a different
message to each to clarify which one we hit, i.e. which phase of engine
parking we are processing.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122124154.483444-1-chris@chris-wilson.co.uk

drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where intel_uncore/i915_perf_stream  struct
pointer is readily available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@@
identifier func, T;
@@
func(...) {
...
struct intel_uncore *T = ...;
<...
(
-WARN(
+drm_WARN(&T->i915->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->i915->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->i915->drm,
...)
)
...>

}

@@
identifier func, T;
@@
func(struct intel_uncore *T,...) {
<...
(
-WARN(
+drm_WARN(&T->i915->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->i915->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->i915->drm,
...)
)
...>

}

@@
identifier func, T;
@@
func(struct i915_perf_stream *T,...) {
+struct drm_i915_private *i915 = T->perf->i915;
<+...
(
-WARN(
+drm_WARN(&i915->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&i915->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&i915->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&i915->drm,
...)
)
...+>

}

command: ls drivers/gpu/drm/i915/*.c | xargs spatch --sp-file <script> \
					--linux-spacing --in-place
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115034455.17658-11-pankaj.laxminarayan.bharadiya@intel.com

drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_i915_private struct pointer is readily
available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule2@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

command: ls drivers/gpu/drm/i915/*.c | xargs spatch --sp-file \
			<script> --linux-spacing --in-place
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115034455.17658-10-pankaj.laxminarayan.bharadiya@intel.com

drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_i915_private struct pointer is readily
available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule2@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

command: spatch --sp-file <script> --dir drivers/gpu/drm/i915/gt \
					--linux-spacing --in-place
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115034455.17658-7-pankaj.laxminarayan.bharadiya@intel.com

drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_i915_private struct pointer is readily
available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule2@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

command: spatch --sp-file <script> --dir drivers/gpu/drm/i915/gem \
					--linux-spacing --in-place
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115034455.17658-6-pankaj.laxminarayan.bharadiya@intel.com

Drm specific drm_WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where intel_encoder struct pointer is available.

The conversion was done automatically with below coccinelle semantic
patch.

@@
identifier func, T;
@@
func(...) {
...
struct intel_encoder *T = ...;
<...
(
-WARN(
+drm_WARN(T->base.dev,
...)
|
-WARN_ON(
+drm_WARN_ON(T->base.dev,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(T->base.dev,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(T->base.dev,
...)
)
...>

}

@@
identifier func, T;
@@
func(struct intel_encoder *T,...) {
<...
(
-WARN(
+drm_WARN(T->base.dev,
...)
|
-WARN_ON(
+drm_WARN_ON(T->base.dev,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(T->base.dev,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(T->base.dev,
...)
)
...>

}

command: spatch --sp-file <script> --dir drivers/gpu/drm/i915/display \
					--linux-spacing --in-place
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115034455.17658-5-pankaj.laxminarayan.bharadiya@intel.com

Merge tag 'topic/drm-warn-2020-01-22' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next-queued

struct drm_device based drm_WARN* macros
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87eevrecnf.fsf@intel.com

Add new struct drm_device based WARN* macros. These are modeled after
the core kernel device based WARN* macros. These would be preferred
over the regular WARN* macros, where possible.

These macros include device information in the backtrace, so we know
what device the warnings originate from.

Knowing the device specific information in the backtrace would be
helpful in development all around.
Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Sean Paul <sean@poorly.run>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115034455.17658-2-pankaj.laxminarayan.bharadiya@intel.com

While we do flush writes to the vma before unbinding (to make sure they
go through the right detiling register), we may also be concurrently
poking at the GGTT_WRITE bit from set-domain, as we mark all GGTT vma
associated with an object. We know this is for another vma, as we
are currently unbinding this one -- so if this vma will be reused, it
will be refaulted and have its dirty bit set before the next write.

Closes: https://gitlab.freedesktop.org/drm/intel/issues/999Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121222447.419489-1-chris@chris-wilson.co.uk

Despite the fact that the VBT appears to have a field for specifying
that a system is equipped with a panel that supports standard VESA
backlight controls over the DP AUX channel, so far every system we've
spotted DPCD backlight control support on doesn't actually set this
field correctly and all have it set to INTEL_BACKLIGHT_DISPLAY_DDI.

While we don't know the exact reason for this VBT misuse, talking with
some vendors indicated that there's a good number of laptop panels out
there that supposedly support both PWM backlight controls and DPCD
backlight controls as a workaround until Intel supports DPCD backlight
controls across platforms universally. This being said, the X1 Extreme
2nd Gen that I have here (note that Lenovo is not the hardware vendor
that informed us of this) PWM backlight controls are advertised, but
only DPCD controls actually function. I'm going to make an educated
guess here and say that on systems like this one, it's likely that PWM
backlight controls might have been intended to work but were never
really tested by QA.

Since we really need backlights to work without any extra module
parameters, let's take the risk here and rely on the standard DPCD caps
to tell us whether AUX backlight controls are supported or not. We still
check the VBT, just so we can print a debugging message on systems that
advertise DPCD backlight support on the panel but not in the VBT.

Changes since v3:
* Print a debugging message if we enable DPCD backlight control on a
  device which doesn't report DPCD backlight controls in it's VBT,
  instead of warning on custom panel backlight interfaces.
Signed-off-by: Lyude Paul <lyude@redhat.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112376
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Perry Yuan <pyuan@redhat.com>
Cc: AceLan Kao <acelan.kao@canonical.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117232155.135579-1-lyude@redhat.com

It's been a long enough transition period since the DRM_I915_FORCE_PROBE
config and i915.force_probe module parameter were introduced in commit
7ef5ef5c ("drm/i915: add force_probe module parameter to replace
alpha_support"). Remove alpha support.

Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tomi Sarvela <tomi.p.sarvela@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121103020.26494-1-jani.nikula@intel.com

For a simulated preemption reset, we don't populate the request and so
do not fill in the guilty context name.

[   79.991294] i915 0000:00:02.0: GPU HANG: ecode 9:1:e757fefe, in  [0]

Just don't mention the empty string in the logs!

Fixes: 742379c0 ("drm/i915: Start chopping up the GPU error capture")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200121132107.267709-1-chris@chris-wilson.co.uk

Eliminate the inconsistencies in the hdcp code local variables:
- use dev_priv over dev
- use to_i915() instead of dev->dev_private
- initialize variables when declaring them
- a bit of declaration suffling to appease ocd
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-10-ville.syrjala@linux.intel.comReviewed-by: Ramalingam C <ramalingam.c@intel.com>

Use the standard naming convention and rename conn_to_dig_port()
to intel_attached_dig_port().

@@
@@
- conn_to_dig_port
+ intel_attached_dig_port
	(...)
{
...
}

@@
expression C;
@@
- conn_to_dig_port(C)
+ intel_attached_dig_port(C)
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-9-ville.syrjala@linux.intel.comReviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

Replace the hand rolled intel_attached_dp() with the real thing.

@@
identifier F !~ "^intel_attached_dp$";
expression C;
@@
F(...)
{
<...
- enc_to_intel_dp(intel_attached_encoder(C))
+ intel_attached_dp(C)
...>
}

v2: Regenerated
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-8-ville.syrjala@linux.intel.comReviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

We have uses for intel_attached_dp() outside of intel_dp.c. Move
it to a header.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-7-ville.syrjala@linux.intel.comReviewed-by: Mika Kahola <mika.kahola@intel.com>

It's easy to confuse the drm_connector->encoder (legacy state
adjusted during modeset) and intel_connector->encoder (the statically
(sans. MST) attached encoder of the connector). For the latter
let's use intel_attached_encoder() consistently.

@@
identifier F !~ "^intel_attached_encoder$";
struct intel_connector *C;
expression E;
@@
F(...)
{
<...
(
  C->encoder = E
|
- C->encoder
+ intel_attached_encoder(C)
)
...>
}

@@
identifier F !~ "^intel_attached_encoder$";
struct drm_connector *C;
expression E;
@@
F(...)
{
<...
(
  to_intel_connector(C)->encoder = E
|
- to_intel_connector(C)->encoder
+ intel_attached_encoder(to_intel_connector(C))
)
...>
}

v2: Regenerated
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191204180549.1267-6-ville.syrjala@linux.intel.comReviewed-by: Juha-Pekka Heikkila <juhapekka.heikkila@gmail.com>

Provide slightly more debugging help.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117150235.22471-1-jani.nikula@intel.com

Don't access i915->vbt.ddi_port_info[] directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/42544944ce505826335bab30cc76e135581229be.1579270868.git.jani.nikula@intel.com

Report port presence based on port presence in VBT alone, relaxing the
requirements on supported encoders (DP, DVI, or HDMI). The goal is to
make future changes easier, however there is a small risk of reporting
more ports present than before in case of dubious VBT.

Regarding the current callers of intel_bios_is_port_present(), the
potential issue might be caused by DVO_PORT_CRT being identified as port
E in dvo_port_to_port(). Hopefully no VBT has that on SKL+ which support
DP/DVI/HDMI on port E; the current CRT init code on HSW/BDW does not
care.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4338a29e4ed49e69f859dff1490fd85f6ae6177e.1579270868.git.jani.nikula@intel.com

Don't access i915->vbt.ddi_port_info[] directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/21549ff74e8e5746917b0e2be4afbfb141e26657.1579270868.git.jani.nikula@intel.com

Don't access i915->vbt.ddi_port_info[] directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9e4fcb625cec26ee88245aad7ae80bfe93b14e59.1579270868.git.jani.nikula@intel.com

Don't access i915->vbt.ddi_port_info[] directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8c30e1183afdd469c95b01f64ca0458b9e832404.1579270868.git.jani.nikula@intel.com

Don't access i915->vbt.ddi_port_info[] directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/6d61a5bc60c995d2ee812ef61d3c5c93b61453e7.1579270868.git.jani.nikula@intel.com

Don't access i915->vbt.ddi_port_info[] directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/fb8645cecadbc4ebeea1c0de94cb3116a769d9bf.1579270868.git.jani.nikula@intel.com

Don't access i915->vbt.ddi_port_info[] directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/da8ca144020fe165af33992661568d0586a2fdeb.1579270868.git.jani.nikula@intel.com

Don't access i915->vbt.ddi_port_info[] directly.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c52c39df43374b51f56439daf8047079afae7749.1579270868.git.jani.nikula@intel.com

Currently we create a new mmap_offset for every call to
mmap_offset_ioctl. This exposes ourselves to an abusive client that may
simply create new mmap_offsets ad infinitum, which will exhaust physical
memory and the virtual address space. In addition to the exhaustion, a
very long linear list of mmap_offsets causes other clients using the
object to incur long list walks -- these long lists can also be
generated by simply having many clients generate their own mmap_offset.

However, we can simply use the drm_vma_node itself to manage the file
association (allow/revoke) dropping our need to keep an mmo per-file.
Then if we keep a small rbtree of per-type mmap_offsets, we can lookup
duplicate requests quickly.

Fixes: cc662126 ("drm/i915: Introduce DRM_I915_GEM_MMAP_OFFSET")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Reviewed-by: Abdiel Janulgue <abdiel.janulgue@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200120104924.4000706-3-chris@chris-wilson.co.uk

Move the force_dvi check to a single function that can be called from
both mode validation and compute_config(). Note that currently we
don't call it from mode validation, but that will change soon.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-3-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Move the force_dvi check to a single function that can be called from
both mode validation and compute_config().
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-2-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

The strings we want to print to the on stack buffers should
be no more than
8 * 3 + strlen("(GET_SCALED_HDTV_RESOLUTION_SUPPORT)") + 1 = 61
bytes. So let's shrink the buffers down to 64 bytes.

Also switch the BUG_ON()s to WARN_ON()s if I made a mistake in
my arithmentic.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200108181242.13650-1-ville.syrjala@linux.intel.comReviewed-by: Jani Nikula <jani.nikula@intel.com>

Let's not pollute the function scope with variables when they're
only needed inside some loops.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-5-ville.syrjala@linux.intel.comReviewed-by: José Roberto de Souza <jose.souza@intel.com>

sync_mode_slaves_mask is a bitmask so use PIPE_CONF_CHECK_X() for it
so we get the mismatch printed in hex instead of decimal.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-4-ville.syrjala@linux.intel.comReviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Tested-by: Manasi Navare <manasi.d.navare@intel.com>

Let's use the pipe rather than the silly 'i' iterator from
for_each_oldnew_intel_crtc_in_state() for indexing the ddb
entries array. Maybe one day we can assume c99 and hide the
'i' entirely from sight.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-3-ville.syrjala@linux.intel.comReviewed-by: José Roberto de Souza <jose.souza@intel.com>

Currently we don't call intel_crtc_prepare_cleared_state() for crtcs
that are going to be entirely disabled (uapi.enable==false). That
means such crtcs will leave stale junk lying around in their states
and we have to sprinkle hw.enable checks all over before we can
look at the states. Let's change that a bit so that we aways do
the state clearing, even for fully disabled crtcs.

Note that we still keep some parts of the old state (see
intel_crtc_prepare_cleared_state() for the details) so probably
can't trust things 100% when hw.enable==false. But at least there's
less chance now that we end up looking at stale junk.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-2-ville.syrjala@linux.intel.comReviewed-by: José Roberto de Souza <jose.souza@intel.com>

The post-fastset "does anyone still need a full modeset?" for
port sync looks busted. The outer loop bails out of a full modeset
is still needed by the current crtc, and then we skip forcing
a full modeset on the related crtcs. That's totally the opposite
of what we want.

The MST path has the logic mostly the other way around so it
looks correct. To fix the port sync case let's follow the MST
logic for both. So, if the current crtc already needs a modeset
we do nothing. otherwise we check if any of the related crtcs
needs a modeset, and if so we force a full modeset for the
current crtc.

And while at let's change the else if to a plain if to so
we don't have needless coupling between the MST and port sync
checks.

Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Fixes: 05a8e451 ("drm/i915/display: Use external dependency loop for port sync")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200115190813.17971-1-ville.syrjala@linux.intel.comReviewed-by: José Roberto de Souza <jose.souza@intel.com>

In our ABI we have defined I915_ENGINE_CLASS_INVALID_NONE and
I915_ENGINE_CLASS_INVALID_VIRTUAL as negative values which creates
implicit coupling with type widths used in, also ABI, struct
i915_engine_class_instance.

One place where we export engine->uabi_class
I915_ENGINE_CLASS_INVALID_VIRTUAL is from our our tracepoints. Because the
type of the former is u8 in contrast to u16 defined in the ABI, 254 will
be returned instead of 65534 which userspace would legitimately expect.

Another place is I915_CONTEXT_PARAM_ENGINES.

Therefore we need to align the type used to store engine ABI class and
instance.

v2:
 * Update the commit message mentioning get_engines and cc stable.
   (Chris)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Fixes: 6d06779e ("drm/i915: Load balancing across a virtual engine")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: <stable@vger.kernel.org> # v5.3+
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200116134508.25211-1-tvrtko.ursulin@linux.intel.com

Just in the very unlikely case we have not stopped the GPU before we
return the pages being used by the GPU to the system, force a reset.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117180309.3249427-1-chris@chris-wilson.co.uk

If we create a rather large userptr object(e.g 1ULL << 32) we might
shift past the type-width of num_pages: (int)num_pages << PAGE_SHIFT,
resulting in a totally bogus sg_table, which fortunately will eventually
manifest as:

gen8_ppgtt_insert_huge:463 GEM_BUG_ON(iter->sg->length < page_size)
kernel BUG at drivers/gpu/drm/i915/gt/gen8_ppgtt.c:463!

v2: more unsigned long
    prefer I915_GTT_PAGE_SIZE

Fixes: 5cc9ed4b ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200117132413.1170563-2-matthew.auld@intel.com