Merge tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux

Pull chrome platform fix from Tzung-Bi Shih:
 "Fix a kernel data leak vulnerability"

* tag 'tag-chrome-platform-fixes-for-v6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
  platform/chrome: cros_ec_chardev: fix kernel data leak from ioctl

Pull i2c fixes from Wolfram Sang:
 "A set of regular driver fixes"

* tag 'i2c-for-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
  i2c: xgene-slimpro: Fix out-of-bounds bug in xgene_slimpro_i2c_xfer()
  i2c: hisi: Only use the completion interrupt to finish the transfer
  i2c: hisi: Avoid redundant interrupts
  i2c: mxs: ensure that DMA buffers are safe for DMA
  i2c: imx-lpi2c: check only for enabled interrupt flags
  i2c: imx-lpi2c: clean rx/tx buffers upon new message

Pull networking fixes from Jakub Kicinski:
 "Including fixes from bpf, wifi and bluetooth.

  Current release - regressions:

   - wifi: mt76: mt7915: add back 160MHz channel width support for
     MT7915

   - libbpf: revert poisoning of strlcpy, it broke uClibc-ng

  Current release - new code bugs:

   - bpf: improve the coverage of the "allow reads from uninit stack"
     feature to fix verification complexity problems

   - eth: am65-cpts: reset PPS genf adj settings on enable

  Previous releases - regressions:

   - wifi: mac80211: serialize ieee80211_handle_wake_tx_queue()

   - wifi: mt76: do not run mt76_unregister_device() on unregistered hw,
     fix null-deref

   - Bluetooth: btqcomsmd: fix command timeout after setting BD address

   - eth: igb: revert rtnl_lock() that causes a deadlock

   - dsa: mscc: ocelot: fix device specific statistics

  Previous releases - always broken:

   - xsk: add missing overflow check in xdp_umem_reg()

   - wifi: mac80211:
      - fix QoS on mesh interfaces
      - fix mesh path discovery based on unicast packets

   - Bluetooth:
      - ISO: fix timestamped HCI ISO data packet parsing
      - remove "Power-on" check from Mesh feature

   - usbnet: more fixes to drivers trusting packet length

   - wifi: iwlwifi: mvm: fix mvmtxq->stopped handling

   - Bluetooth: btintel: iterate only bluetooth device ACPI entries

   - eth: iavf: fix inverted Rx hash condition leading to disabled hash

   - eth: igc: fix the validation logic for taprio's gate list

   - dsa: tag_brcm: legacy: fix daisy-chained switches

  Misc:

   - bpf: adjust insufficient default bpf_jit_limit to account for
     growth of BPF use over the last 5 years

   - xdp: bpf_xdp_metadata() use EOPNOTSUPP as unique errno indicating
     no driver support"

* tag 'net-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (84 commits)
  Bluetooth: HCI: Fix global-out-of-bounds
  Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
  Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
  Bluetooth: L2CAP: Fix responding with wrong PDU type
  Bluetooth: btqcomsmd: Fix command timeout after setting BD address
  Bluetooth: btinel: Check ACPI handle for NULL before accessing
  net: mdio: thunder: Add missing fwnode_handle_put()
  net: dsa: mt7530: move setting ssc_delta to PHY_INTERFACE_MODE_TRGMII case
  net: dsa: mt7530: move lowering TRGMII driving to mt7530_setup()
  net: dsa: mt7530: move enabling disabling core clock to mt7530_pll_setup()
  net: asix: fix modprobe "sysfs: cannot create duplicate filename"
  gve: Cache link_speed value from device
  tools: ynl: Fix genlmsg header encoding formats
  net: enetc: fix aggregate RMON counters not showing the ranges
  Bluetooth: Remove "Power-on" check from Mesh feature
  Bluetooth: Fix race condition in hci_cmd_sync_clear
  Bluetooth: btintel: Iterate only bluetooth device ACPI entries
  Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
  Bluetooth: btusb: Remove detection of ISO packets over bulk
  Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
  ...

Pull btrfs fixes from David Sterba:
 "A few more fixes, the zoned accounting fix is spread across a few
  patches, preparatory and the actual fixes:

   - zoned mode:
      - fix accounting of unusable zone space
      - fix zone activation condition for DUP profile
      - preparatory patches

   - improved error handling of missing chunks

   - fix compiler warning"

* tag 'for-6.3-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
  btrfs: zoned: drop space_info->active_total_bytes
  btrfs: zoned: count fresh BG region as zone unusable
  btrfs: use temporary variable for space_info in btrfs_update_block_group
  btrfs: rename BTRFS_FS_NO_OVERCOMMIT to BTRFS_FS_ACTIVE_ZONE_TRACKING
  btrfs: zoned: fix btrfs_can_activate_zone() to support DUP profile
  btrfs: fix compiler warning on SPARC/PA-RISC handling fscrypt_setup_filename
  btrfs: handle missing chunk mapping more gracefully

Pull SCSI fixes from James Bottomley:
 "Four small fixes, three in drivers.

  The core fix adds a UFS device to an existing quirk to avoid a huge
  delay on boot"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: scsi_dh_alua: Fix memleak for 'qdata' in alua_activate()
  scsi: qla2xxx: Synchronize the IOCB count to be in order
  scsi: qla2xxx: Perform lockless command completion in abort path
  scsi: core: Add BLIST_SKIP_VPD_PAGES for SKhynix H28U74301AMR

It is possible to peep kernel page's data by providing larger `insize`
in struct cros_ec_command[1] when invoking EC host commands.

Fix it by using zeroed memory.

[1]: https://elixir.bootlin.com/linux/v6.2/source/include/linux/platform_data/cros_ec_proto.h#L74

Fixes: eda2e30c ("mfd / platform: cros_ec: Miscellaneous character device to talk with the EC")
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20230324010658.1082361-1-tzungbi@kernel.org

Daniel Borkmann says:

====================
pull-request: bpf 2023-03-23

We've added 8 non-merge commits during the last 13 day(s) which contain
a total of 21 files changed, 238 insertions(+), 161 deletions(-).

The main changes are:

1) Fix verification issues in some BPF programs due to their stack usage
   patterns, from Eduard Zingerman.

2) Fix to add missing overflow checks in xdp_umem_reg and return an error
   in such case, from Kal Conley.

3) Fix and undo poisoning of strlcpy in libbpf given it broke builds for
   libcs which provided the former like uClibc-ng, from Jesus Sanchez-Palencia.

4) Fix insufficient bpf_jit_limit default to avoid users running into hard
   to debug seccomp BPF errors, from Daniel Borkmann.

5) Fix driver return code when they don't support a bpf_xdp_metadata kfunc
   to make it unambiguous from other errors, from Jesper Dangaard Brouer.

6) Two BPF selftest fixes to address compilation errors from recent changes
   in kernel structures, from Alexei Starovoitov.

* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
  xdp: bpf_xdp_metadata use EOPNOTSUPP for no driver support
  bpf: Adjust insufficient default bpf_jit_limit
  xsk: Add missing overflow check in xdp_umem_reg
  selftests/bpf: Fix progs/test_deny_namespace.c issues.
  selftests/bpf: Fix progs/find_vma_fail1.c build error.
  libbpf: Revert poisoning of strlcpy
  selftests/bpf: Tests for uninitialized stack reads
  bpf: Allow reads from uninit stack
====================

Link: https://lore.kernel.org/r/20230323225221.6082-1-daniel@iogearbox.netSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Luiz Augusto von Dentz says:

====================
bluetooth pull request for net:

 - Fix MGMT add advmon with RSSI command
 - L2CAP: Fix responding with wrong PDU type
 - Fix race condition in hci_cmd_sync_clear
 - ISO: Fix timestamped HCI ISO data packet parsing
 - HCI: Fix global-out-of-bounds
 - hci_sync: Resume adv with no RPA when active scan

* tag 'for-net-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
  Bluetooth: HCI: Fix global-out-of-bounds
  Bluetooth: mgmt: Fix MGMT add advmon with RSSI command
  Bluetooth: btsdio: fix use after free bug in btsdio_remove due to unfinished work
  Bluetooth: L2CAP: Fix responding with wrong PDU type
  Bluetooth: btqcomsmd: Fix command timeout after setting BD address
  Bluetooth: btinel: Check ACPI handle for NULL before accessing
  Bluetooth: Remove "Power-on" check from Mesh feature
  Bluetooth: Fix race condition in hci_cmd_sync_clear
  Bluetooth: btintel: Iterate only bluetooth device ACPI entries
  Bluetooth: ISO: fix timestamped HCI ISO data packet parsing
  Bluetooth: btusb: Remove detection of ISO packets over bulk
  Bluetooth: hci_core: Detect if an ACL packet is in fact an ISO packet
  Bluetooth: hci_sync: Resume adv with no RPA when active scan
====================

Link: https://lore.kernel.org/r/20230323202335.3380841-1-luiz.dentz@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Kalle Valo says:

====================
wireless fixes for v6.3

Third set of fixes for v6.3. mt76 has two kernel crash fixes and
adding back 160 MHz channel support for mt7915. mac80211 has fixes for
a race in transmit path and two mesh related fixes. iwlwifi also has
fixes for races.

* tag 'wireless-2023-03-23' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
  wifi: mac80211: fix mesh path discovery based on unicast packets
  wifi: mac80211: fix qos on mesh interfaces
  wifi: iwlwifi: mvm: protect TXQ list manipulation
  wifi: iwlwifi: mvm: fix mvmtxq->stopped handling
  wifi: mac80211: Serialize ieee80211_handle_wake_tx_queue()
  wifi: mwifiex: mark OF related data as maybe unused
  wifi: mt76: connac: do not check WED status for non-mmio devices
  wifi: mt76: mt7915: add back 160MHz channel width support for MT7915
  wifi: mt76: do not run mt76_unregister_device() on unregistered hw
====================

Link: https://lore.kernel.org/r/20230323110332.C4FE4C433D2@smtp.kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Pull gfs2 fix from Andreas Gruenbacher:

 - Reinstate commit 970343cd ("GFS2: free disk inode which is
   deleted by remote node -V2") as reverting that commit could cause
   gfs2_put_super() to hang.

* tag 'gfs2-v6.3-rc3-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  Reinstate "GFS2: free disk inode which is deleted by remote node -V2"

To loop a variable-length array, hci_init_stage_sync(stage) considers
that stage[i] is valid as long as stage[i-1].func is valid.
Thus, the last element of stage[].func should be intentionally invalid
as hci_init0[], le_init2[], and others did.
However, amp_init1[] and amp_init2[] have no invalid element, letting
hci_init_stage_sync() keep accessing amp_init1[] over its valid range.
This patch fixes this by adding {} in the last of amp_init1[] and
amp_init2[].

==================================================================
BUG: KASAN: global-out-of-bounds in hci_dev_open_sync (
/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
/v6.2-bzimage/net/bluetooth/hci_sync.c:3343
/v6.2-bzimage/net/bluetooth/hci_sync.c:4418
/v6.2-bzimage/net/bluetooth/hci_sync.c:4609
/v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
Read of size 8 at addr ffffffffaed1ab70 by task kworker/u5:0/1032
CPU: 0 PID: 1032 Comm: kworker/u5:0 Not tainted 6.2.0 #3
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04
Workqueue: hci1 hci_power_on
Call Trace:
 <TASK>
dump_stack_lvl (/v6.2-bzimage/lib/dump_stack.c:107 (discriminator 1))
print_report (/v6.2-bzimage/mm/kasan/report.c:307
  /v6.2-bzimage/mm/kasan/report.c:417)
? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
kasan_report (/v6.2-bzimage/mm/kasan/report.c:184
  /v6.2-bzimage/mm/kasan/report.c:519)
? hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:3154
  /v6.2-bzimage/net/bluetooth/hci_sync.c:3343
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4418
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4609
  /v6.2-bzimage/net/bluetooth/hci_sync.c:4689)
? __pfx_hci_dev_open_sync (/v6.2-bzimage/net/bluetooth/hci_sync.c:4635)
? mutex_lock (/v6.2-bzimage/./arch/x86/include/asm/atomic64_64.h:190
  /v6.2-bzimage/./include/linux/atomic/atomic-long.h:443
  /v6.2-bzimage/./include/linux/atomic/atomic-instrumented.h:1781
  /v6.2-bzimage/kernel/locking/mutex.c:171
  /v6.2-bzimage/kernel/locking/mutex.c:285)
? __pfx_mutex_lock (/v6.2-bzimage/kernel/locking/mutex.c:282)
hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:485
  /v6.2-bzimage/net/bluetooth/hci_core.c:984)
? __pfx_hci_power_on (/v6.2-bzimage/net/bluetooth/hci_core.c:969)
? read_word_at_a_time (/v6.2-bzimage/./include/asm-generic/rwonce.h:85)
? strscpy (/v6.2-bzimage/./arch/x86/include/asm/word-at-a-time.h:62
  /v6.2-bzimage/lib/string.c:161)
process_one_work (/v6.2-bzimage/kernel/workqueue.c:2294)
worker_thread (/v6.2-bzimage/./include/linux/list.h:292
  /v6.2-bzimage/kernel/workqueue.c:2437)
? __pfx_worker_thread (/v6.2-bzimage/kernel/workqueue.c:2379)
kthread (/v6.2-bzimage/kernel/kthread.c:376)
? __pfx_kthread (/v6.2-bzimage/kernel/kthread.c:331)
ret_from_fork (/v6.2-bzimage/arch/x86/entry/entry_64.S:314)
 </TASK>
The buggy address belongs to the variable:
amp_init1+0x30/0x60
The buggy address belongs to the physical page:
page:000000003a157ec6 refcount:1 mapcount:0 mapping:0000000000000000 ia
flags: 0x200000000001000(reserved|node=0|zone=2)
raw: 0200000000001000 ffffea0005054688 ffffea0005054688 000000000000000
raw: 0000000000000000 0000000000000000 00000001ffffffff 000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
 ffffffffaed1aa00: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 00
 ffffffffaed1aa80: 00 00 00 00 f9 f9 f9 f9 00 00 00 00 00 00 00 00
>ffffffffaed1ab00: 00 f9 f9 f9 f9 f9 f9 f9 00 00 00 00 00 00 f9 f9
                                                             ^
 ffffffffaed1ab80: f9 f9 f9 f9 00 00 00 00 f9 f9 f9 f9 00 00 00 f9
 ffffffffaed1ac00: f9 f9 f9 f9 00 06 f9 f9 f9 f9 f9 f9 00 00 02 f9

This bug is found by FuzzBT, a modified version of Syzkaller.
Other contributors for this bug are Ruoyu Wu and Peng Hui.

Fixes: d0b13706 ("Bluetooth: hci_sync: Rework init stages")
Signed-off-by: Sungwoo Kim <iam@sung-woo.kim>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The MGMT command: MGMT_OP_ADD_ADV_PATTERNS_MONITOR_RSSI uses variable
length argument. This causes host not able to register advmon with rssi.

This patch has been locally tested by adding monitor with rssi via
btmgmt on a kernel 6.1 machine.
Reviewed-by: Archie Pusaka <apusaka@chromium.org>
Fixes: b338d917 ("Bluetooth: Implement support for Mesh")
Signed-off-by: Howard Chung <howardchung@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

In btsdio_probe, &data->work was bound with btsdio_work.In
btsdio_send_frame, it was started by schedule_work.

If we call btsdio_remove with an unfinished job, there may
be a race condition and cause UAF bug on hdev.

Fixes: ddbaf13e ("[Bluetooth] Add generic driver for Bluetooth SDIO devices")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

L2CAP_ECRED_CONN_REQ shall be responded with L2CAP_ECRED_CONN_RSP not
L2CAP_LE_CONN_RSP:

L2CAP LE EATT Server - Reject - run
  Listening for connections
  New client connection with handle 0x002a
  Sending L2CAP Request from client
  Client received response code 0x15
  Unexpected L2CAP response code (expected 0x18)
L2CAP LE EATT Server - Reject - test failed

> ACL Data RX: Handle 42 flags 0x02 dlen 26
      LE L2CAP: Enhanced Credit Connection Request (0x17) ident 1 len 18
        PSM: 39 (0x0027)
        MTU: 64
        MPS: 64
        Credits: 5
        Source CID: 65
        Source CID: 66
        Source CID: 67
        Source CID: 68
        Source CID: 69
< ACL Data TX: Handle 42 flags 0x00 dlen 16
      LE L2CAP: LE Connection Response (0x15) ident 1 len 8
        invalid size
        00 00 00 00 00 00 06 00

L2CAP LE EATT Server - Reject - run
  Listening for connections
  New client connection with handle 0x002a
  Sending L2CAP Request from client
  Client received response code 0x18
L2CAP LE EATT Server - Reject - test passed

Fixes: 15f02b91 ("Bluetooth: L2CAP: Add initial code for Enhanced Credit Based Mode")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

On most devices using the btqcomsmd driver (e.g. the DragonBoard 410c
and other devices based on the Qualcomm MSM8916/MSM8909/... SoCs)
the Bluetooth firmware seems to become unresponsive for a while after
setting the BD address. On recent kernel versions (at least 5.17+)
this often causes timeouts for subsequent commands, e.g. the HCI reset
sent by the Bluetooth core during initialization:

    Bluetooth: hci0: Opcode 0x c03 failed: -110

Unfortunately this behavior does not seem to be documented anywhere.
Experimentation suggests that the minimum necessary delay to avoid
the problem is ~150us. However, to be sure add a sleep for > 1ms
in case it is a bit longer on other firmware versions.

Older kernel versions are likely also affected, although perhaps with
slightly different errors or less probability. Side effects can easily
hide the issue in most cases, e.g. unrelated incoming interrupts that
cause the necessary delay.

Fixes: 1511cc75 ("Bluetooth: Introduce Qualcomm WCNSS SMD based HCI driver")
Signed-off-by: Stephan Gerhold <stephan.gerhold@kernkonzept.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Older platforms and Virtual platforms which doesn't have support for
bluetooth device in ACPI firmware will not have valid ACPI handle.
Check for validity of handle before accessing.

dmesg log from simics environment (virtual platform):

BUG: unable to handle kernel NULL pointer dereference at
0000000000000018
IP: acpi_ns_walk_namespace+0x5c/0x278
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
Modules linked in: bnep intel_powerclamp coretemp kvm_intel
kvm irqbypass intel_cstate input_leds joydev serio_raw mac_hid
btusb(OE) btintel(OE) bluetooth(OE) lpc_ich compat(OE) ecdh_generic
i7core_edac i5500_temp shpchp binfmt_misc sch_fq_codel parport_pc ppdev
lp parport ip_tables x_tables autofs4 hid_generic usbhid hid e1000e
psmouse ahci pata_acpi libahci ptp pps_core floppy
CPU: 0 PID: 35 Comm: kworker/u3:0 Tainted: G           OE
4.15.0-140-generic #144-Ubuntu
Hardware name: Simics Simics, BIOS Simics 01/01/2011
Workqueue: hci0 hci_power_on [bluetooth]
RIP: 0010:acpi_ns_walk_namespace+0x5c/0x278
RSP: 0000:ffffaa9c0049bba8 EFLAGS: 00010246
RAX: 0000000000000001 RBX: 0000000000001001 RCX: 0000000000000010
RDX: ffffffff92ea7e27 RSI: ffffffff92ea7e10 RDI: 00000000000000c8
RBP: ffffaa9c0049bbf8 R08: 0000000000000000 R09: ffffffffc05b39d0
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000001
R13: 0000000000000000 R14: ffffffffc05b39d0 R15: ffffaa9c0049bc70
FS:  0000000000000000(0000) GS:ffff8be73fc00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000018 CR3: 0000000075f0e000 CR4: 00000000000006f0

Fixes: 294d749b ("Bluetooth: btintel: Iterate only bluetooth device ACPI entries")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

It turns out that reverting commit 970343cd ("GFS2: free disk inode
which is deleted by remote node -V2") causes a regression related to
evicting inodes that were unlinked on a different cluster node.

We could also have simply added a call to d_mark_dontcache() to function
gfs2_try_evict(), but the original pre-revert code is better tested and
proven.

This reverts commit 445cb127.
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>

Pull zonefs fixes from Damien Le Moal:

 - Silence a false positive smatch warning about an uninitialized
   variable

 - Fix an error message to provide more useful information about invalid
   zone append write results

* tag 'zonefs-6.3-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs:
  zonefs: Fix error message in zonefs_file_dio_append()
  zonefs: Prevent uninitialized symbol 'size' warning

In device_for_each_child_node(), we should add fwnode_handle_put()
when break out of the iteration device_for_each_child_node()
as it will automatically increase and decrease the refcounter.

Fixes: 379d7ac7 ("phy: mdio-thunder: Add driver for Cavium Thunder SoC MDIO buses.")
Signed-off-by: Liang He <windhl@126.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Saeed Mahameed says:

====================
mlx5 fixes 2023-03-21

This series provides bug fixes to mlx5 driver.

* tag 'mlx5-fixes-2023-03-21' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux:
  net/mlx5: E-Switch, Fix an Oops in error handling code
  net/mlx5: Read the TC mapping of all priorities on ETS query
  net/mlx5e: Overcome slow response for first macsec ASO WQE
  net/mlx5e: Initialize link speed to zero
  net/mlx5: Fix steering rules cleanup
  net/mlx5e: Block entering switchdev mode with ns inconsistency
  net/mlx5e: Set uplink rep as NETNS_LOCAL
====================

Link: https://lore.kernel.org/r/20230321211135.47711-1-saeed@kernel.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-21 (ice)

This series contains updates to ice driver only.

Piotr sets first_desc field for proper handling of Flow Director
packets.

Michal moves error checking for VF earlier in function to properly return
error before other checks/reporting; he also corrects VSI filter removal to
be done during VSI removal and not rebuild.

* '100GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  ice: remove filters only if VSI is deleted
  ice: check if VF exists before mode check
  ice: fix rx buffers handling for flow director packets
====================

Link: https://lore.kernel.org/r/20230321183641.2849726-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Tony Nguyen says:

====================
Intel Wired LAN Driver Updates 2023-03-21 (iavf, i40e)

This series contains updates to iavf and i40e drivers.

Stefan Assmann adds check, and return, if driver has already gone
through remove to prevent hang for iavf.

Radoslaw adds zero initialization to ensure Flow Director packets are
populated with correct values for i40e.

* '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
  i40e: fix flow director packet filter programming
  iavf: fix hang on reboot with ice
====================

Link: https://lore.kernel.org/r/20230321183548.2849671-1-anthony.l.nguyen@intel.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move setting the ssc_delta variable to under the PHY_INTERFACE_MODE_TRGMII
case as it's only needed when trgmii is used.

Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-3-arinc.unal@arinc9.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Move lowering the TRGMII Tx clock driving to mt7530_setup(), after setting
the core clock, as seen on the U-Boot MediaTek ethernet driver.

Move the code which looks like it lowers the TRGMII Rx clock driving to
after the TRGMII Tx clock driving is lowered. This is run after lowering
the Tx clock driving on the U-Boot MediaTek ethernet driver as well.

This way, the switch should consume less power regardless of port 6 being
used.

Update the comment explaining mt7530_pad_clk_setup().

Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.

Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L682Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-2-arinc.unal@arinc9.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

Split the code that enables and disables TRGMII clocks and core clock.
Move enabling and disabling core clock to mt7530_pll_setup() as it's
supposed to be run there.

Add 20 ms delay before enabling the core clock as seen on the U-Boot
MediaTek ethernet driver.

Change the comment for enabling and disabling TRGMII clocks as the code
seems to affect both TXC and RXC.

Tested rgmii and trgmii modes of port 6 and rgmii mode of port 5 on MCM
MT7530 on MT7621AT Unielec U7621-06 and standalone MT7530 on MT7623NI
Bananapi BPI-R2.

Fixes: b8f126a8 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Link: https://source.denx.de/u-boot/u-boot/-/blob/29a48bf9ccba45a5e560bb564bbe76e42629325f/drivers/net/mtk_eth.c#L589Tested-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20230320190520.124513-1-arinc.unal@arinc9.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

"modprobe asix ; rmmod asix ; modprobe asix" fails with:
   sysfs: cannot create duplicate filename \
   	'/devices/virtual/mdio_bus/usb-003:004'

Issue was originally reported by Anton Lundin on 2022-06-22 (link below).

Chrome OS team hit the same issue in Feb, 2023 when trying to find
work arounds for other issues with AX88172 devices.

The use of devm_mdiobus_register() with usbnet devices results in the
MDIO data being associated with the USB device. When the asix driver
is unloaded, the USB device continues to exist and the corresponding
"mdiobus_unregister()" is NOT called until the USB device is unplugged
or unauthorized. So the next "modprobe asix" will fail because the MDIO
phy sysfs attributes still exist.

The 'easy' (from a design PoV) fix is to use the non-devm variants of
mdiobus_* functions and explicitly manage this use in the asix_bind
and asix_unbind function calls. I've not explored trying to fix usbnet
initialization so devm_* stuff will work.

Fixes: e532a096 ("net: usb: asix: ax88772: add phylib support")
Reported-by: Anton Lundin <glance@acc.umu.se>
Link: https://lore.kernel.org/netdev/20220623063649.GD23685@pengutronix.de/T/Tested-by: Eizan Miyamoto <eizan@chromium.org>
Signed-off-by: Grant Grundler <grundler@chromium.org>
Link: https://lore.kernel.org/r/20230321170539.732147-1-grundler@chromium.orgSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The link speed is never changed for the uptime of a VM, and the current
implementation sends an admin queue command for each call. Admin queue
command invocations have nontrivial overhead (e.g., VM exits), which can
be disruptive to users if triggered frequently. Our telemetry data shows
that there are VMs that make frequent calls to this admin queue command.
Caching the result of the original admin queue command would eliminate
the need to send multiple admin queue commands on subsequent calls to
retrieve link speed.

Fixes: 7e074d5a ("gve: Enable Link Speed Reporting in the driver.")
Signed-off-by: Joshua Washington <joshwash@google.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321172332.91678-1-joshwash@google.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The pack strings use 'b' signed char for cmd and version but struct
genlmsghdr defines them as unsigned char. Use 'B' instead.

Fixes: 4e4480e8 ("tools: ynl: move the cli and netlink code around")
Signed-off-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://lore.kernel.org/r/20230319193803.97453-1-donald.hunter@gmail.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

When running "ethtool -S eno0 --groups rmon" without an explicit "--src
emac|pmac" argument, the kernel will not report
rx-rmon-etherStatsPkts64to64Octets, rx-rmon-etherStatsPkts65to127Octets,
etc. This is because on ETHTOOL_MAC_STATS_SRC_AGGREGATE, we do not
populate the "ranges" argument.

ocelot_port_get_rmon_stats() does things differently and things work
there. I had forgotten to make sure that the code is structured the same
way in both drivers, so do that now.

Fixes: cf52bd23 ("net: enetc: add support for MAC Merge statistics counters")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/20230321232831.1200905-1-vladimir.oltean@nxp.comSigned-off-by: Jakub Kicinski <kuba@kernel.org>

The Bluetooth mesh experimental feature enable was requiring the
controller to be powered off in order for the Enable to work. Mesh is
supposed to be enablable regardless of the controller state, and created
an unintended requirement that the mesh daemon be started before the
classic bluetoothd daemon.

Fixes: af6bcc19 ("Bluetooth: Add experimental wrapper for MGMT based mesh")
Signed-off-by: Brian Gix <brian.gix@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

There is a potential race condition in hci_cmd_sync_work and
hci_cmd_sync_clear, and could lead to use-after-free. For instance,
hci_cmd_sync_work is added to the 'req_workqueue' after cancel_work_sync
The entry of 'cmd_sync_work_list' may be freed in hci_cmd_sync_clear, and
causing kernel panic when it is used in 'hci_cmd_sync_work'.

Here's the call trace:

dump_stack_lvl+0x49/0x63
print_report.cold+0x5e/0x5d3
? hci_cmd_sync_work+0x282/0x320
kasan_report+0xaa/0x120
? hci_cmd_sync_work+0x282/0x320
__asan_report_load8_noabort+0x14/0x20
hci_cmd_sync_work+0x282/0x320
process_one_work+0x77b/0x11c0
? _raw_spin_lock_irq+0x8e/0xf0
worker_thread+0x544/0x1180
? poll_idle+0x1e0/0x1e0
kthread+0x285/0x320
? process_one_work+0x11c0/0x11c0
? kthread_complete_and_exit+0x30/0x30
ret_from_fork+0x22/0x30
</TASK>

Allocated by task 266:
kasan_save_stack+0x26/0x50
__kasan_kmalloc+0xae/0xe0
kmem_cache_alloc_trace+0x191/0x350
hci_cmd_sync_queue+0x97/0x2b0
hci_update_passive_scan+0x176/0x1d0
le_conn_complete_evt+0x1b5/0x1a00
hci_le_conn_complete_evt+0x234/0x340
hci_le_meta_evt+0x231/0x4e0
hci_event_packet+0x4c5/0xf00
hci_rx_work+0x37d/0x880
process_one_work+0x77b/0x11c0
worker_thread+0x544/0x1180
kthread+0x285/0x320
ret_from_fork+0x22/0x30

Freed by task 269:
kasan_save_stack+0x26/0x50
kasan_set_track+0x25/0x40
kasan_set_free_info+0x24/0x40
____kasan_slab_free+0x176/0x1c0
__kasan_slab_free+0x12/0x20
slab_free_freelist_hook+0x95/0x1a0
kfree+0xba/0x2f0
hci_cmd_sync_clear+0x14c/0x210
hci_unregister_dev+0xff/0x440
vhci_release+0x7b/0xf0
__fput+0x1f3/0x970
____fput+0xe/0x20
task_work_run+0xd4/0x160
do_exit+0x8b0/0x22a0
do_group_exit+0xba/0x2a0
get_signal+0x1e4a/0x25b0
arch_do_signal_or_restart+0x93/0x1f80
exit_to_user_mode_prepare+0xf5/0x1a0
syscall_exit_to_user_mode+0x26/0x50
ret_from_fork+0x15/0x30

Fixes: 6a98e383 ("Bluetooth: Add helper for serialized HCI command execution")
Cc: stable@vger.kernel.org
Signed-off-by: Min Li <lm0963hack@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Current flow interates over entire ACPI table entries looking for
Bluetooth Per Platform Antenna Gain(PPAG) entry. This patch iterates
over ACPI entries relvant to Bluetooth device only.

Fixes: c585a92b ("Bluetooth: btintel: Set Per Platform Antenna Gain(PPAG)")
Signed-off-by: Kiran K <kiran.k@intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Use correct HCI ISO data packet header struct when the packet has
timestamp. The timestamp, when present, goes before the other fields
(Core v5.3 4E 5.4.5), so the structs are not compatible.

Fixes: ccf74f23 ("Bluetooth: Add BTPROTO_ISO socket type")
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

This removes the code introduced by
14202eff as hci_recv_frame is now able
to detect ACL packets that are in fact ISO packets.

Fixes: 14202eff ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Because some transports don't have a dedicated type for ISO packets
(see 14202eff) they may use ACL type
when in fact they are ISO packets.

In the past this was left for the driver to detect such thing but it
creates a problem when using the likes of btproxy when used by a VM as
the host would not be aware of the connection the guest is doing it
won't be able to detect such behavior, so this make bt_recv_frame
detect when it happens as it is the common interface to all drivers
including guest VMs.

Fixes: 14202eff ("Bluetooth: btusb: Detect if an ACL packet is in fact an ISO packet")
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

The address resolution should be disabled during the active scan,
so all the advertisements can reach the host. The advertising
has to be paused before disabling the address resolution,
because the advertising will prevent any changes to the resolving
list and the address resolution status. Skipping this will cause
the hci error and the discovery failure.

According to the bluetooth specification:
"7.8.44 LE Set Address Resolution Enable command

This command shall not be used when:
- Advertising (other than periodic advertising) is enabled,
- Scanning is enabled, or
- an HCI_LE_Create_Connection, HCI_LE_Extended_Create_Connection, or
  HCI_LE_Periodic_Advertising_Create_Sync command is outstanding."

If the host is using RPA, the controller needs to generate RPA for
the advertising, so the advertising must remain paused during the
active scan.

If the host is not using RPA, the advertising can be resumed after
disabling the address resolution.

Fixes: 9afc675e ("Bluetooth: hci_sync: allow advertise when scan without RPA")
Signed-off-by: Zhengping Jiang <jiangzp@google.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>

Pull ARM fix from Russell King:
 "Just one fix for now to eliminate a KASAN false positive"

* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 9290/1: uaccess: Fix KASAN false-positives

Merge tag 'bootconfig-fixes-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace

Pull bootconfig fixes from Masami Hiramatsu:

 - Fix bootconfig test script to test increased maximum number (8192)
   node correctly

 - Change the console message if there is no bootconfig data and the
   kernel is compiled with CONFIG_BOOT_CONFIG_FORCE=y

* tag 'bootconfig-fixes-v6.3-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
  bootconfig: Change message if no bootconfig with CONFIG_BOOT_CONFIG_FORCE=y
  bootconfig: Fix testcase to increase max node

When driver doesn't implement a bpf_xdp_metadata kfunc the fallback
implementation returns EOPNOTSUPP, which indicate device driver doesn't
implement this kfunc.

Currently many drivers also return EOPNOTSUPP when the hint isn't
available, which is ambiguous from an API point of view. Instead
change drivers to return ENODATA in these cases.

There can be natural cases why a driver doesn't provide any hardware
info for a specific hint, even on a frame to frame basis (e.g. PTP).
Lets keep these cases as separate return codes.

When describing the return values, adjust the function kernel-doc layout
to get proper rendering for the return values.

Fixes: ab46182d ("net/mlx4_en: Support RX XDP metadata")
Fixes: bc8d405b ("net/mlx5e: Support RX XDP metadata")
Fixes: 306531f0 ("veth: Support RX XDP metadata")
Fixes: 3d76a4d3 ("bpf: XDP metadata RX kfuncs")
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Stanislav Fomichev <sdf@google.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Acked-by: Tariq Toukan <tariqt@nvidia.com>
Link: https://lore.kernel.org/r/167940675120.2718408.8176058626864184420.stgit@firesoulSigned-off-by: Alexei Starovoitov <ast@kernel.org>

Local port is a 10-bit number, but it was mistakenly stored in a u8,
resulting in firmware errors when using a netdev corresponding to a
local port higher than 255.

Fix by storing the local port in u16, as is done in the rest of the
code.

Fixes: bf73904f ("mlxsw: Add support for 802.1Q FID family")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Danielle Ratson <danieller@nvidia.com>
Signed-off-by: Petr Machata <petrm@nvidia.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Link: https://lore.kernel.org/r/eace1f9d96545ab8a2775db857cb7e291a9b166b.1679398549.git.petrm@nvidia.comSigned-off-by: Paolo Abeni <pabeni@redhat.com>