Following the relocation of the function call outside of
__acpi_find_gpio(), move the ACPI device NULL check to
acpi_can_fallback_to_crs().
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: kernelci.org bot <bot@kernelci.org>
Closes: https://lore.kernel.org/all/20240426154208.81894-1-laura.nao@collabora.com/
Fixes: 49c02f6e ("gpiolib: acpi: Move acpi_can_fallback_to_crs() out of __acpi_find_gpio()")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Pull coccinelle updates from Julia Lawall:
 "One patch slightly improves the text in a comment.

  The other patch (on minmax.cocci) removes a report about ? being used
  in return statements that has been generating not very useful
  suggestions to change idiomatic code"

* tag 'cocci-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jlawall/linux:
  Coccinelle: pm_runtime: Fix grammar in comment
  coccinelle: misc: minmax: Suppress reports for err returns

Pull asm-generic cleanups from Arnd Bergmann:
 "These are a few cross-architecture cleanup patches:

   - separate out fbdev support from the asm/video.h contents that may
     be used by either the old fbdev drivers or the newer drm display
     code (Thomas Zimmermann)

   - cleanups for the generic bitops code and asm-generic/bug.h
     (Thorsten Blum)

   - remove the orphaned include/asm-generic/page.h header that used to
     be included by long-removed mmu-less architectures (me)"

* tag 'asm-generic-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
  arch: Fix name collision with ACPI's video.o
  bug: Improve comment
  asm-generic: remove unused asm-generic/page.h
  arch: Rename fbdev header and source files
  arch: Remove struct fb_info from video helpers
  arch: Select fbdev helpers with CONFIG_VIDEO
  bitops: Change function return types from long to int

Pull more SoC devicetree updates from Arnd Bergmann:
 "This is a follow-up to an earlier pull request for device tree
  changes, as three platform maintainers sent their contents too late to
  be included in the main set, but had not caused any further problems
  since then:

   - The Amlogic platform now containts support for two new SoC types,
     the A4 and A5 chips for audio applications. Both come with a
     reference board, and one more dts file gets addded for the
     combination of the MNT Reform Laptop with the BPI-CM4 CPU module

   - The ASpeed platform adds support for six addititional server
     platforms that use ast2500 or ast2600 as their BMC, while another
     one gets removed

   - The RISC-V platforms from Microchip, Starfive and and T-HEAD get
     additional features for existing hardware, plus the addition of the
     Milk-V Mars based on the StarFive VisionFive v2 board"

* tag 'soc-dt-late-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (76 commits)
  riscv: dts: microchip: add pac1934 power-monitor to icicle
  riscv: dts: thead: Fix node ordering in TH1520 device tree
  ARM: dts: aspeed: Add ASRock E3C256D4I BMC
  dt-bindings: arm: aspeed: document ASRock E3C256D4I
  dt-bindings: trivial-devices: add isil,isl69269
  ARM: dts: aspeed: x4tf: Add dts for asus x4tf project
  dt-bindings: arm: aspeed: add ASUS X4TF board
  ARM: dts: aspeed: Remove Facebook Cloudripper dts
  ARM: dts: aspeed: drop unused ref_voltage ADC property
  ARM: dts: aspeed: harma: correct Mellanox multi-host property
  ARM: dts: aspeed: yosemitev2: correct Mellanox multi-host property
  ARM: dts: aspeed: yosemite4: correct Mellanox multi-host property
  ARM: dts: aspeed: greatlakes: correct Mellanox multi-host property
  ARM: dts: aspeed: Modify I2C bus configuration
  ARM: dts: aspeed: Disable unused ADC channels for Asrock X570D4U BMC
  ARM: dts: aspeed: Modify GPIO table for Asrock X570D4U BMC
  ARM: dts: aspeed: yosemite4: set bus13 frequency to 100k
  ARM: dts: Aspeed: Bonnell: Fix NVMe LED labels
  ARM: dts: aspeed: yosemite4: Enable ipmb device for OCP debug card
  ARM: dts: aspeed: ahe50dc: Update lm25066 regulator name
  ...

Pull vfio updates from Alex Williamson:

 - The vfio fsl-mc bus driver has become orphaned. We'll consider
   removing it in future releases if a new maintainer isn't found (Alex
   Williamson)

 - Improved usage of opaque data in vfio-pci INTx handling, avoiding
   lookups of the eventfd through the interrupt and irqfd runtime paths
   (Alex Williamson)

 - Resolve an error path memory leak introduced in vfio-pci interrupt
   code (Ye Bin)

 - Addition of interrupt support for vfio devices exposed on the CDX
   bus, including a new MSI allocation helper and export of existing
   helpers for MSI alloc and free (Nipun Gupta)

 - A new vfio-pci variant driver supporting migration of Intel QAT VF
   devices for the GEN4 PFs (Xin Zeng & Yahui Cao)

 - Resolve a possibly circular locking dependency in vfio-pci by
   avoiding copy_to_user() from a PCI bus walk callback (Alex
   Williamson)

 - Trivial docs update to remove a duplicate semicolon (Foryun Ma)

* tag 'vfio-v6.10-rc1' of https://github.com/awilliam/linux-vfio:
  vfio/pci: Restore zero affected bus reset devices warning
  vfio: remove an extra semicolon
  vfio/pci: Collect hot-reset devices to local buffer
  vfio/qat: Add vfio_pci driver for Intel QAT SR-IOV VF devices
  vfio/cdx: add interrupt support
  genirq/msi: Add MSI allocation helper and export MSI functions
  vfio/pci: fix potential memory leak in vfio_intx_enable()
  vfio/pci: Pass eventfd context object through irqfd
  vfio/pci: Pass eventfd context to IRQ handler
  MAINTAINERS: Orphan vfio fsl-mc bus driver

Merge tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest

Pull kselftest fixes from Shuah Khan:
 "Revert framework change to add D_GNU_SOURCE to KHDR_INCLUDES to
  Makefile, lib.mk, and kselftest_harness.h and follow-on changes to
  cgroup and sgx test as they are causing build failures and warnings"

* tag 'linux_kselftest-next-6.10-rc1-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
  Revert "selftests/cgroup: Drop define _GNU_SOURCE"
  Revert "selftests/sgx: Include KHDR_INCLUDES in Makefile"
  Revert "selftests: Compile kselftest headers with -D_GNU_SOURCE"

Commit 2fd001cd ("arch: Rename fbdev header and source files")
renames the video source files under arch/ such that they do not
refer to fbdev any longer. The new files named video.o conflict with
ACPI's video.ko module. Modprobing the ACPI module can then fail with
warnings about missing symbols, as shown below.

  (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_unregister (err -2)
  (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_register_backlight (err -2)
  (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol __acpi_video_get_backlight_type (err -2)
  (i915_selftest:1107) igt_kmod-WARNING: i915: Unknown symbol acpi_video_register (err -2)

Fix the issue by renaming the architecture's video.o to video-common.o.
Reported-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Closes: https://lore.kernel.org/intel-gfx/9dcac6e9-a3bf-4ace-bbdc-f697f767f9e0@suse.de/T/#tSigned-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 2fd001cd ("arch: Rename fbdev header and source files")
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arch@vger.kernel.org
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull f2fs updates from Jaegeuk Kim:
 "In this round, we've tried to address some performance issues on zoned
  storage such as direct IO and write_hints. In addition, we've migrated
  some IO paths using folio. Meanwhile, there are multiple bug fixes in
  the compression paths, sanity check conditions, and error handlers.

  Enhancements:
   - allow direct io of pinned files for zoned storage
   - assign the write hint per stream by default
   - convert read paths and test_writeback to folio
   - avoid allocating WARM_DATA segment for direct IO

  Bug fixes:
   - fix false alarm on invalid block address
   - fix to add missing iput() in gc_data_segment()
   - fix to release node block count in error path of
     f2fs_new_node_page()
   - compress:
       - don't allow unaligned truncation on released compress inode
       - cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
       - fix error path of inc_valid_block_count()
       - fix to update i_compr_blocks correctly
   - fix block migration when section is not aligned to pow2
   - don't trigger OPU on pinfile for direct IO
   - fix to do sanity check on i_xattr_nid in sanity_check_inode()
   - write missing last sum blk of file pinning section
   - clear writeback when compression failed
   - fix to adjust appropirate defragment pg_end

  As usual, there are several minor code clean-ups, and fixes to manage
  missing corner cases in the error paths"

* tag 'f2fs-for-6.10.rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (50 commits)
  f2fs: initialize last_block_in_bio variable
  f2fs: Add inline to f2fs_build_fault_attr() stub
  f2fs: fix some ambiguous comments
  f2fs: fix to add missing iput() in gc_data_segment()
  f2fs: allow dirty sections with zero valid block for checkpoint disabled
  f2fs: compress: don't allow unaligned truncation on released compress inode
  f2fs: fix to release node block count in error path of f2fs_new_node_page()
  f2fs: compress: fix to cover {reserve,release}_compress_blocks() w/ cp_rwsem lock
  f2fs: compress: fix error path of inc_valid_block_count()
  f2fs: compress: fix typo in f2fs_reserve_compress_blocks()
  f2fs: compress: fix to update i_compr_blocks correctly
  f2fs: check validation of fault attrs in f2fs_build_fault_attr()
  f2fs: fix to limit gc_pin_file_threshold
  f2fs: remove unused GC_FAILURE_PIN
  f2fs: use f2fs_{err,info}_ratelimited() for cleanup
  f2fs: fix block migration when section is not aligned to pow2
  f2fs: zone: fix to don't trigger OPU on pinfile for direct IO
  f2fs: fix to do sanity check on i_xattr_nid in sanity_check_inode()
  f2fs: fix to avoid allocating WARM_DATA segment for direct IO
  f2fs: remove redundant parameter in is_next_segment_free()
  ...

Pull xfs updates from Chandan Babu:
 "Online repair feature continues to be expanded. Also, we now support
  delayed allocation for realtime devices which have an extent size that
  is equal to filesystem's block size.

  New code:

   - Introduce Parent Pointer extended attribute for inodes

   - Bring back delalloc support for realtime devices which have an
     extent size that is equal to filesystem's block size

   - Improve performance of log incompat feature handling

  Online Repair:

   - Implement atomic file content exchanges i.e. exchange ranges of
     bytes between two files atomically

   - Create temporary files to repair file-based metadata. This uses
     atomic file content exchange facility to swap file fork mappings
     between the temporary file and the metadata inode

   - Allow callers of directory/xattr code to set an explicit owner
     number to be written into the header fields of any new blocks that
     are created. This is required to avoid walking every block of the
     new structure and modify their ownership during online repair

   - Repair more data structures:
       - Extended attributes
       - Inode unlinked state
       - Directories
       - Symbolic links
       - AGI's unlinked inode list
       - Parent pointers

   - Move Orphan files to lost and found directory

   - Fixes for Inode repair functionality

   - Introduce a new sub-AG FITRIM implementation to reduce the duration
     for which the AGF lock is held

   - Updates for the design documentation

   - Use Parent Pointers to assist in checking directories, parent
     pointers, extended attributes, and link counts

  Fixes:

   - Prevent userspace from reading invalid file data due to incorrect.
     updation of file size when performing a non-atomic clone operation

   - Minor fixes to online repair

   - Fix confusing return values from xfs_bmapi_write()

   - Fix an out of bounds access due to incorrect h_size during log
     recovery

   - Defer upgrading the extent counters in xfs_reflink_end_cow_extent()
     until we know we are going to modify the extent mapping

   - Remove racy access to if_bytes check in
     xfs_reflink_end_cow_extent()

   - Fix sparse warnings

  Cleanups:

   - Hold inode locks on all files involved in a rename until the
     completion of the operation. This is in preparation for the parent
     pointers patchset where parent pointers are applied in a separate
     chained update from the actual directory update

   - Compile out v4 support when disabled

   - Cleanup xfs_extent_busy_clear()

   - Remove unused flags and fields from struct xfs_da_args

   - Remove definitions of unused functions

   - Improve extended attribute validation

   - Add higher level directory operations helpers to remove duplication
     of code

   - Cleanup quota (un)reservation interfaces"

* tag 'xfs-6.10-merge-6' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (221 commits)
  xfs: simplify iext overflow checking and upgrade
  xfs: remove a racy if_bytes check in xfs_reflink_end_cow_extent
  xfs: upgrade the extent counters in xfs_reflink_end_cow_extent later
  xfs: xfs_quota_unreserve_blkres can't fail
  xfs: consolidate the xfs_quota_reserve_blkres definitions
  xfs: clean up buffer allocation in xlog_do_recovery_pass
  xfs: fix log recovery buffer allocation for the legacy h_size fixup
  xfs: widen flags argument to the xfs_iflags_* helpers
  xfs: minor cleanups of xfs_attr3_rmt_blocks
  xfs: create a helper to compute the blockcount of a max sized remote value
  xfs: turn XFS_ATTR3_RMT_BUF_SPACE into a function
  xfs: use unsigned ints for non-negative quantities in xfs_attr_remote.c
  xfs: do not allocate the entire delalloc extent in xfs_bmapi_write
  xfs: fix xfs_bmap_add_extent_delay_real for partial conversions
  xfs: remove the xfs_iext_peek_prev_extent call in xfs_bmapi_allocate
  xfs: pass the actual offset and len to allocate to xfs_bmapi_allocate
  xfs: don't open code XFS_FILBLKS_MIN in xfs_bmapi_write
  xfs: lift a xfs_valid_startblock into xfs_bmapi_allocate
  xfs: remove the unusued tmp_logflags variable in xfs_bmapi_allocate
  xfs: fix error returns from xfs_bmapi_write
  ...

Pull isofs, udf, quota, ext2, and reiserfs updates from Jan Kara:

 - convert isofs to the new mount API

 - cleanup isofs Makefile

 - udf conversion to folios

 - some other small udf cleanups and fixes

 - ext2 cleanups

 - removal of reiserfs .writepage method

 - update reiserfs README file

* tag 'fs_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  isofs: Use *-y instead of *-objs in Makefile
  ext2: Remove LEGACY_DIRECT_IO dependency
  isofs: Remove calls to set/clear the error flag
  ext2: Remove call to folio_set_error()
  udf: Use a folio in udf_write_end()
  udf: Convert udf_page_mkwrite() to use a folio
  udf: Convert udf_symlink_getattr() to use a folio
  udf: Convert udf_adinicb_readpage() to udf_adinicb_read_folio()
  udf: Convert udf_expand_file_adinicb() to use a folio
  udf: Convert udf_write_begin() to use a folio
  udf: Convert udf_symlink_filler() to use a folio
  reiserfs: Trim some README bits
  quota: fix to propagate error of mark_dquot_dirty() to caller
  reiserfs: Convert to writepages
  udf: udftime: prevent overflow in udf_disk_stamp_to_time()
  ext2: set FMODE_CAN_ODIRECT instead of a dummy direct_IO method
  udf: replace deprecated strncpy/strcpy with strscpy
  udf: Remove second semicolon
  isofs: convert isofs to use the new mount API
  fs: quota: use group allocation of per-cpu counters API

This reverts commit e6595224.

These kinds of patches are only making the code worse.

Compilers don't care about the unnecessary check, but removing it makes
the code less obvious to a human.  The declaration of 'len' is more than
80 lines earlier, so a human won't easily see that 'len' is of an
unsigned type, so to a human the range check that checks against zero is
much more explicit and obvious.

Any tool that complains about a range check like this just because the
variable is unsigned is actively detrimental, and should be ignored.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Pull fsnotify updates from Jan Kara:

 - reduce overhead of fsnotify infrastructure when no permission events
   are in use

 - a few small cleanups

* tag 'fsnotify_for_v6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
  fsnotify: fix UAF from FS_ERROR event on a shutting down filesystem
  fsnotify: optimize the case of no permission event watchers
  fsnotify: use an enum for group priority constants
  fsnotify: move s_fsnotify_connectors into fsnotify_sb_info
  fsnotify: lazy attach fsnotify_sb_info state to sb
  fsnotify: create helper fsnotify_update_sb_watchers()
  fsnotify: pass object pointer and type to fsnotify mark helpers
  fanotify: merge two checks regarding add of ignore mark
  fsnotify: create a wrapper fsnotify_find_inode_mark()
  fsnotify: create helpers to get sb and connp from object
  fsnotify: rename fsnotify_{get,put}_sb_connectors()
  fsnotify: Avoid -Wflex-array-member-not-at-end warning
  fanotify: remove unneeded sub-zero check for unsigned value

s/does not use unnecessary/do not unnecessarily use/
Signed-off-by: Thorsten Blum <thorsten.blum@toblux.com>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

Most of the people prefer:

return ret < 0 ? ret: 0;

than:

return min(ret, 0);

Let's tweak the cocci file to ignore those lines completely.
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>

Pull dma-mapping updates from Christoph Hellwig:

 - optimize DMA sync calls when they are no-ops (Alexander Lobakin)

 - fix swiotlb padding for untrusted devices (Michael Kelley)

 - add documentation for swiotb (Michael Kelley)

* tag 'dma-mapping-6.10-2024-05-20' of git://git.infradead.org/users/hch/dma-mapping:
  dma: fix DMA sync for drivers not calling dma_set_mask*()
  xsk: use generic DMA sync shortcut instead of a custom one
  page_pool: check for DMA sync shortcut earlier
  page_pool: don't use driver-set flags field directly
  page_pool: make sure frag API fields don't span between cachelines
  iommu/dma: avoid expensive indirect calls for sync operations
  dma: avoid redundant calls for sync operations
  dma: compile-out DMA sync op calls when not used
  iommu/dma: fix zeroing of bounce buffer padding used by untrusted devices
  swiotlb: remove alloc_size argument to swiotlb_tbl_map_single()
  Documentation/core-api: add swiotlb documentation

Pull MIPS updates from Thomas Bogendoerfer:
 "Just cleanups and fixes"

* tag 'mips_6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (24 commits)
  MIPS: Take in account load hazards for HI/LO restoring
  MIPS: SGI-IP27: use WARN_ON() output
  MIPS: SGI-IP27: fix -Wunused-variable in arch_init_irq()
  MIPS: SGI-IP27: micro-optimize arch_init_irq()
  mips: dts: ralink: mt7621: reorder the attributes of the root node
  mips: dts: ralink: mt7621: reorder pci?_phy attributes
  mips: dts: ralink: mt7621: reorder pcie node attributes and children
  mips: dts: ralink: mt7621: reorder ethernet node attributes and kids
  mips: dts: ralink: mt7621: reorder gic node attributes
  mips: dts: ralink: mt7621: reorder mmc node attributes
  mips: dts: ralink: mt7621: move pinctrl and sort its children
  mips: dts: ralink: mt7621: reorder spi0 node attributes
  mips: dts: ralink: mt7621: reorder i2c node attributes
  mips: dts: ralink: mt7621: reorder gpio node attributes
  mips: dts: ralink: mt7621: reorder sysc node attributes
  mips: dts: ralink: mt7621: reorder mmc regulator attributes
  mips: dts: ralink: mt7621: reorder cpuintc node attributes
  mips: dts: ralink: mt7621: reorder cpu node attributes
  MIPS: Add prototypes for plat_post_relocation() and relocate_kernel()
  MIPS: Octeon: Add PCIe link status check
  ...

Pull dmi updates from Jean Delvare:
 "Bug fixes:

   - KCFI violation in dmi-id

   - stop decoding on broken (short) DMI table entry

  New features:

   - print info about populated memory slots at boot"

* tag 'dmi-for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging:
  firmware: dmi: Add info message for number of populated and total memory slots
  firmware: dmi: Stop decoding on broken entry
  firmware: dmi-id: add a release callback function

Pull watchdog updates from Wim Van Sebroeck:

 - Add Lenovo SE10 platform Watchdog Driver

 - Other small fixes and improvements

* tag 'linux-watchdog-6.10-rc1' of git://www.linux-watchdog.org/linux-watchdog:
  watchdog: LENOVO_SE10_WDT should depend on X86 && DMI
  watchdog: sa1100: Fix PTR_ERR_OR_ZERO() vs NULL check in sa1100dog_probe()
  watchdog: rti_wdt: Set min_hw_heartbeat_ms to accommodate a safety margin
  watchdog: add HAS_IOPORT dependencies
  watchdog/wdt-main: Use cpumask_of() to avoid cpumask var on stack
  watchdog: bd9576: Drop "always-running" property
  watchdog: mtx-1: drop driver owner assignment
  watchdog: cpu5wdt.c: Fix use-after-free bug caused by cpu5wdt_trigger
  watchdog: lenovo_se10_wdt: Watchdog driver for Lenovo SE10 platform

Pull i2c updates from Wolfram Sang:
 "i2c core removes an argument from the i2c_mux_add_adapter() call to
  further deprecate class based I2C device instantiation. All users are
  converted, too.

  Other that that, Andi collected a number if I2C host driver patches.
  Those merges have their own description"

* tag 'i2c-for-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (72 commits)
  power: supply: sbs-manager: Remove class argument from i2c_mux_add_adapter()
  i2c: mux: Remove class argument from i2c_mux_add_adapter()
  i2c: synquacer: Fix an error handling path in synquacer_i2c_probe()
  i2c: acpi: Unbind mux adapters before delete
  i2c: designware: Replace MODULE_ALIAS() with MODULE_DEVICE_TABLE()
  i2c: pxa: use 'time_left' variable with wait_event_timeout()
  i2c: s3c2410: use 'time_left' variable with wait_event_timeout()
  i2c: rk3x: use 'time_left' variable with wait_event_timeout()
  i2c: qcom-geni: use 'time_left' variable with wait_for_completion_timeout()
  i2c: jz4780: use 'time_left' variable with wait_for_completion_timeout()
  i2c: synquacer: use 'time_left' variable with wait_for_completion_timeout()
  i2c: stm32f7: use 'time_left' variable with wait_for_completion_timeout()
  i2c: stm32f4: use 'time_left' variable with wait_for_completion_timeout()
  i2c: st: use 'time_left' variable with wait_for_completion_timeout()
  i2c: omap: use 'time_left' variable with wait_for_completion_timeout()
  i2c: imx-lpi2c: use 'time_left' variable with wait_for_completion_timeout()
  i2c: hix5hd2: use 'time_left' variable with wait_for_completion_timeout()
  i2c: exynos5: use 'time_left' variable with wait_for_completion_timeout()
  i2c: digicolor: use 'time_left' variable with wait_for_completion_timeout()
  i2c: amd-mp2-plat: use 'time_left' variable with wait_for_completion_timeout()
  ...

Pull pin control updates from Linus Walleij:
 "Core changes:

   - Use DEFINE_SHOW_STORE_ATTRIBUTE() in debugfs entries

  New drivers:

   - Qualcomm PMIH0108, PMD8028, PMXR2230 and PM6450 pin control support

  Improvements:

   - Serious cleanup of the recently merged aw9523 driver

   - Fix PIN_CONFIG_BIAS_DISABLE handling in pinctrl-single

   - A slew of device tree binding cleanups

   - Support a bus clock in the Samsung driver"

* tag 'pinctrl-v6.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: bcm2835: Make pin freeing behavior configurable
  dt-bindings: pinctrl: qcom,pmic-gpio: Fix "comptaible" typo for PMIH0108
  pinctrl: qcom: pinctrl-sm7150: Fix sdc1 and ufs special pins regs
  dt-bindings: pinctrl: mediatek: mt7622: add "antsel" function
  dt-bindings: pinctrl: mediatek: mt7622: fix array properties
  pinctrl: samsung: drop redundant drvdata assignment
  pinctrl: samsung: support a bus clock
  dt-bindings: pinctrl: samsung: google,gs101-pinctrl needs a clock
  pinctrl: renesas: rzg2l: Limit 2.5V power supply to Ethernet interfaces
  pinctrl: renesas: r8a779h0: Add INTC-EX pins, groups, and function
  pinctrl: renesas: r8a779h0: Fix IRQ suffixes
  pinctrl: renesas: rzg2l: Remove extra space in function parameter
  dt-bindings: pinctrl: qcom,pmic-mpp: add support for PM8901
  pinctrl: pinconf-generic: print hex value
  pinctrl: realtek: fix module autoloading
  pinctrl: qcom: sm7150: fix module autoloading
  pinctrl: loongson2: fix module autoloading
  pinctrl: mediatek: fix module autoloading
  pinctrl: freescale: imx8ulp: fix module autoloading
  dt-bindings: pinctrl: qcom,pmic-gpio: Allow gpio-hog nodes
  ...

Pull crypto fixes from Herbert Xu:
 "Fix a bug in the new ecc P521 code as well as a buggy fix in qat"

* tag 'v6.10-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: ecc - Prevent ecc_digits_from_bytes from reading too many bytes
  crypto: qat - Fix ADF_DEV_RESET_SYNC memory leak

This reverts commit c1457d9a.

The framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is reverted
as it is causing build failures and warnings.

Revert this change as this change depends on the framework
change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

This reverts commit 2c3b8f8f.

The framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is reverted
as it is causing build failures and warnings.

Revert this change as this change depends on the framework
change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

This reverts commit daef47b8.

This framework change to add D_GNU_SOURCE to KHDR_INCLUDES
to Makefile, lib.mk, and kselftest_harness.h is causing build
failures and warnings.

Revert this change.
Reported-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>

Merge tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm

Pull non-mm updates from Andrew Morton:
 "Mainly singleton patches, documented in their respective changelogs.
  Notable series include:

   - Some maintenance and performance work for ocfs2 in Heming Zhao's
     series "improve write IO performance when fragmentation is high".

   - Some ocfs2 bugfixes from Su Yue in the series "ocfs2 bugs fixes
     exposed by fstests".

   - kfifo header rework from Andy Shevchenko in the series "kfifo:
     Clean up kfifo.h".

   - GDB script fixes from Florian Rommel in the series "scripts/gdb:
     Fixes for $lx_current and $lx_per_cpu".

   - After much discussion, a coding-style update from Barry Song
     explaining one reason why inline functions are preferred over
     macros. The series is "codingstyle: avoid unused parameters for a
     function-like macro""

* tag 'mm-nonmm-stable-2024-05-19-11-56' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (62 commits)
  fs/proc: fix softlockup in __read_vmcore
  nilfs2: convert BUG_ON() in nilfs_finish_roll_forward() to WARN_ON()
  scripts: checkpatch: check unused parameters for function-like macro
  Documentation: coding-style: ask function-like macros to evaluate parameters
  nilfs2: use __field_struct() for a bitwise field
  selftests/kcmp: remove unused open mode
  nilfs2: remove calls to folio_set_error() and folio_clear_error()
  kernel/watchdog_perf.c: tidy up kerneldoc
  watchdog: allow nmi watchdog to use raw perf event
  watchdog: handle comma separated nmi_watchdog command line
  nilfs2: make superblock data array index computation sparse friendly
  squashfs: remove calls to set the folio error flag
  squashfs: convert squashfs_symlink_read_folio to use folio APIs
  scripts/gdb: fix detection of current CPU in KGDB
  scripts/gdb: make get_thread_info accept pointers
  scripts/gdb: fix parameter handling in $lx_per_cpu
  scripts/gdb: fix failing KGDB detection during probe
  kfifo: don't use "proxy" headers
  media: stih-cec: add missing io.h
  media: rc: add missing io.h
  ...

Pull bcachefs updates from Kent Overstreet:

 - More safety fixes, primarily found by syzbot

 - Run the upgrade/downgrade paths in nochnages mode. Nochanges mode is
   primarily for testing fsck/recovery in dry run mode, so it shouldn't
   change anything besides disabling writes and holding dirty metadata
   in memory.

   The idea here was to reduce the amount of activity if we can't write
   anything out, so that bringing up a filesystem in "super ro" mode
   would be more lilkely to work for data recovery - but norecovery is
   the correct option for this.

 - btree_trans->locked; we now track whether a btree_trans has any btree
   nodes locked, and this is used for improved assertions related to
   trans_unlock() and trans_relock(). We'll also be using it for
   improving how we work with lockdep in the future: we don't want
   lockdep to be tracking individual btree node locks because we take
   too many for lockdep to track, and it's not necessary since we have a
   cycle detector.

 - Trigger improvements that are prep work for online fsck

 - BTREE_TRIGGER_check_repair; this regularizes how we do some repair
   work for extents that goes with running triggers in fsck, and fixes
   some subtle issues with transaction restarts there.

 - bch2_snapshot_equiv() has now been ripped out of fsck.c; snapshot
   equivalence classes are for when snapshot deletion leaves behind
   redundant snapshot nodes, but snapshot deletion now cleans this up
   right away, so the abstraction doesn't need to leak.

 - Improvements to how we resume writing to the journal in recovery. The
   code for picking the new place to write when reading the journal is
   greatly simplified and we also store the position in the superblock
   for when we don't read the journal; this means that we preserve more
   of the journal for list_journal debugging.

 - Improvements to sysfs btree_cache and btree_node_cache, for debugging
   memory reclaim.

 - We now detect when we've blocked for 10 seconds on the allocator in
   the write path and dump some useful info.

 - Safety fixes for devices references: this is a big series that
   changes almost all device lookups to properly check if the device
   exists and take a reference to it.

   Previously we assumed that if a bkey exists that references a device
   then the device must exist, and this was enforced in .invalid
   methods, but this was incorrect because it meant device removal
   relied on accounting being correct to not leave keys pointing to
   invalid devices, and that's not something we can assume.

   Getting the "pointer to invalid device" checks out of our .invalid()
   methods fixes some long standing device removal bugs; the only
   outstanding bug with device removal now is a race between the discard
   path and deleting alloc info, which should be easily fixed.

 - The allocator now prefers not to expand the new
   member_info.btree_allocated bitmap, meaning if repair ever requires
   scanning for btree nodes (because of a corrupt interior nodes) we
   won't have to scan the whole device(s).

 - New coding style document, which among other things talks about the
   correct usage of assertions

* tag 'bcachefs-2024-05-19' of https://evilpiepirate.org/git/bcachefs: (155 commits)
  bcachefs: add no_invalid_checks flag
  bcachefs: add counters for failed shrinker reclaim
  bcachefs: Fix sb_field_downgrade validation
  bcachefs: Plumb bch_validate_flags to sb_field_ops.validate()
  bcachefs: s/bkey_invalid_flags/bch_validate_flags
  bcachefs: fsync() should not return -EROFS
  bcachefs: Invalid devices are now checked for by fsck, not .invalid methods
  bcachefs: kill bch2_dev_bkey_exists() in bch2_check_fix_ptrs()
  bcachefs: kill bch2_dev_bkey_exists() in bch2_read_endio()
  bcachefs: bch2_dev_get_ioref() checks for device not present
  bcachefs: bch2_dev_get_ioref2(); io_read.c
  bcachefs: bch2_dev_get_ioref2(); debug.c
  bcachefs: bch2_dev_get_ioref2(); journal_io.c
  bcachefs: bch2_dev_get_ioref2(); io_write.c
  bcachefs: bch2_dev_get_ioref2(); btree_io.c
  bcachefs: bch2_dev_get_ioref2(); backpointers.c
  bcachefs: bch2_dev_get_ioref2(); alloc_background.c
  bcachefs: for_each_bset() declares loop iter
  bcachefs: Move BCACHEFS_STATFS_MAGIC value to UAPI magic.h
  bcachefs: Improve sysfs internal/btree_cache
  ...

Merge tag 'turbostat-for-Linux-6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux

Pull turbostat updates from Len Brown:

 - Survive sparse die id's seen in Linux-6.9

 - Handle clustered-uncore topology in new/upcoming hardware

 - For non-root use, add ability to see software C-state counters

 - Enable reading core and package hardware cstate via perf, and prefer
   perf over the MSR driver access for these counters

* tag 'turbostat-for-Linux-6.10-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
  tools/power turbostat: version 2024.05.10
  tools/power turbostat: Ignore pkg_cstate_limit when it is not available
  tools/power turbostat: Fix order of strings in pkg_cstate_limit_strings
  tools/power turbostat: Read Package-cstates via perf
  tools/power turbostat: Read Core-cstates via perf
  tools/power turbostat: Avoid possible memory corruption due to sparse topology IDs
  tools/power turbostat: Add columns for clustered uncore frequency
  tools/power turbostat: Enable non-privileged users to read sysfs counters
  tools/power turbostat: Replace _Static_assert with BUILD_BUG_ON
  tools/power turbostat: Add ARL-H support
  tools/power turbostat: Enhance ARL/LNL support
  tools/power turbostat: Survive sparse die_id
  tools/power turbostat: Remember global max_die_id
  tools/power turbostat: Harden probe_intel_uncore_frequency()
  tools/power turbostat: Add "snapshot:" Makefile target

Pull kgdb updates from Daniel Thompson:
 "Nine patches this cycle and they split into just three topics:

   - Adopt coccinelle's recommendation to adopt str_plural()

   - A set of seven patches to refactor kdb_read() to improve both code
     clarity and its discipline with respect to fixed size buffers.

     This isn't just a refactor. Between them these also fix a cursor
     movement redraw problem and two buffer overflows (one latent and
     one real, albeit difficult to tickle).

   - Fix an NMI-safety problem when enqueuing kdb's keyboard reset code

  I wrote eight of the nine patches in this collection so many thanks to
  Doug Anderson for the reviews. The changes that affects
  drivers/tty/serial is acked by Greg KH"

* tag 'kgdb-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux:
  serial: kgdboc: Fix NMI-safety problems from keyboard reset code
  kdb: Simplify management of tmpbuffer in kdb_read()
  kdb: Replace double memcpy() with memmove() in kdb_read()
  kdb: Use format-specifiers rather than memset() for padding in kdb_read()
  kdb: Merge identical case statements in kdb_read()
  kdb: Fix console handling when editing and tab-completing commands
  kdb: Use format-strings rather than '\0' injection in kdb_read()
  kdb: Fix buffer overflow during tab-complete
  kdb: Use str_plural() to fix Coccinelle warning

Pull x86 fixes from Ingo Molnar:

 - Fix a NOP-patching bug that resulted in valid but suboptimal
   NOP sequences in certain cases

 - Fix build warnings related to fall-through control flow

* tag 'x86-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/alternatives: Use the correct length when optimizing NOPs
  x86/boot: Address clang -Wimplicit-fallthrough in vsprintf()
  x86/boot: Add a fallthrough annotation

Pull scheduler fixes from Ingo Molnar:

 - Fix a sched_balance_newidle setting bug

 - Fix bug in the setting of /sys/fs/cgroup/test/cpu.max.burst

 - Fix variable-shadowing build warning

 - Extend sched-domains debug output

 - Fix documentation

 - Fix comments

* tag 'sched-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched/core: Fix incorrect initialization of the 'burst' parameter in cpu_max_write()
  sched/fair: Remove stale FREQUENCY_UTIL comment
  sched/fair: Fix initial util_avg calculation
  docs: cgroup-v1: Clarify that domain levels are system-specific
  sched/debug: Dump domains' level
  sched/fair: Allow disabling sched_balance_newidle with sched_relax_domain_level
  arch/topology: Fix variable naming to avoid shadowing

Pull perf event updates from Ingo Molnar:

 - Extend the x86 instruction decoder with APX and
   other new instructions

 - Misc cleanups

* tag 'perf-urgent-2024-05-18' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/cstate: Remove unused 'struct perf_cstate_msr'
  perf/x86/rapl: Rename 'maxdie' to nr_rapl_pmu and 'dieid' to rapl_pmu_idx
  x86/insn: Add support for APX EVEX instructions to the opcode map
  x86/insn: Add support for APX EVEX to the instruction decoder logic
  x86/insn: x86/insn: Add support for REX2 prefix to the instruction decoder opcode map
  x86/insn: Add support for REX2 prefix to the instruction decoder logic
  x86/insn: Add misc new Intel instructions
  x86/insn: Add VEX versions of VPDPBUSD, VPDPBUSDS, VPDPWSSD and VPDPWSSDS
  x86/insn: Fix PUSH instruction in x86 instruction decoder opcode map
  x86/insn: Add Key Locker instructions to the opcode map

Pull mm updates from Andrew Morton:
 "The usual shower of singleton fixes and minor series all over MM,
  documented (hopefully adequately) in the respective changelogs.
  Notable series include:

   - Lucas Stach has provided some page-mapping cleanup/consolidation/
     maintainability work in the series "mm/treewide: Remove pXd_huge()
     API".

   - In the series "Allow migrate on protnone reference with
     MPOL_PREFERRED_MANY policy", Donet Tom has optimized mempolicy's
     MPOL_PREFERRED_MANY mode, yielding almost doubled performance in
     one test.

   - In their series "Memory allocation profiling" Kent Overstreet and
     Suren Baghdasaryan have contributed a means of determining (via
     /proc/allocinfo) whereabouts in the kernel memory is being
     allocated: number of calls and amount of memory.

   - Matthew Wilcox has provided the series "Various significant MM
     patches" which does a number of rather unrelated things, but in
     largely similar code sites.

   - In his series "mm: page_alloc: freelist migratetype hygiene"
     Johannes Weiner has fixed the page allocator's handling of
     migratetype requests, with resulting improvements in compaction
     efficiency.

   - In the series "make the hugetlb migration strategy consistent"
     Baolin Wang has fixed a hugetlb migration issue, which should
     improve hugetlb allocation reliability.

   - Liu Shixin has hit an I/O meltdown caused by readahead in a
     memory-tight memcg. Addressed in the series "Fix I/O high when
     memory almost met memcg limit".

   - In the series "mm/filemap: optimize folio adding and splitting"
     Kairui Song has optimized pagecache insertion, yielding ~10%
     performance improvement in one test.

   - Baoquan He has cleaned up and consolidated the early zone
     initialization code in the series "mm/mm_init.c: refactor
     free_area_init_core()".

   - Baoquan has also redone some MM initializatio code in the series
     "mm/init: minor clean up and improvement".

   - MM helper cleanups from Christoph Hellwig in his series "remove
     follow_pfn".

   - More cleanups from Matthew Wilcox in the series "Various
     page->flags cleanups".

   - Vlastimil Babka has contributed maintainability improvements in the
     series "memcg_kmem hooks refactoring".

   - More folio conversions and cleanups in Matthew Wilcox's series:
	"Convert huge_zero_page to huge_zero_folio"
	"khugepaged folio conversions"
	"Remove page_idle and page_young wrappers"
	"Use folio APIs in procfs"
	"Clean up __folio_put()"
	"Some cleanups for memory-failure"
	"Remove page_mapping()"
	"More folio compat code removal"

   - David Hildenbrand chipped in with "fs/proc/task_mmu: convert
     hugetlb functions to work on folis".

   - Code consolidation and cleanup work related to GUP's handling of
     hugetlbs in Peter Xu's series "mm/gup: Unify hugetlb, part 2".

   - Rick Edgecombe has developed some fixes to stack guard gaps in the
     series "Cover a guard gap corner case".

   - Jinjiang Tu has fixed KSM's behaviour after a fork+exec in the
     series "mm/ksm: fix ksm exec support for prctl".

   - Baolin Wang has implemented NUMA balancing for multi-size THPs.
     This is a simple first-cut implementation for now. The series is
     "support multi-size THP numa balancing".

   - Cleanups to vma handling helper functions from Matthew Wilcox in
     the series "Unify vma_address and vma_pgoff_address".

   - Some selftests maintenance work from Dev Jain in the series
     "selftests/mm: mremap_test: Optimizations and style fixes".

   - Improvements to the swapping of multi-size THPs from Ryan Roberts
     in the series "Swap-out mTHP without splitting".

   - Kefeng Wang has significantly optimized the handling of arm64's
     permission page faults in the series
	"arch/mm/fault: accelerate pagefault when badaccess"
	"mm: remove arch's private VM_FAULT_BADMAP/BADACCESS"

   - GUP cleanups from David Hildenbrand in "mm/gup: consistently call
     it GUP-fast".

   - hugetlb fault code cleanups from Vishal Moola in "Hugetlb fault
     path to use struct vm_fault".

   - selftests build fixes from John Hubbard in the series "Fix
     selftests/mm build without requiring "make headers"".

   - Memory tiering fixes/improvements from Ho-Ren (Jack) Chuang in the
     series "Improved Memory Tier Creation for CPUless NUMA Nodes".
     Fixes the initialization code so that migration between different
     memory types works as intended.

   - David Hildenbrand has improved follow_pte() and fixed an errant
     driver in the series "mm: follow_pte() improvements and acrn
     follow_pte() fixes".

   - David also did some cleanup work on large folio mapcounts in his
     series "mm: mapcount for large folios + page_mapcount() cleanups".

   - Folio conversions in KSM in Alex Shi's series "transfer page to
     folio in KSM".

   - Barry Song has added some sysfs stats for monitoring multi-size
     THP's in the series "mm: add per-order mTHP alloc and swpout
     counters".

   - Some zswap cleanups from Yosry Ahmed in the series "zswap
     same-filled and limit checking cleanups".

   - Matthew Wilcox has been looking at buffer_head code and found the
     documentation to be lacking. The series is "Improve buffer head
     documentation".

   - Multi-size THPs get more work, this time from Lance Yang. His
     series "mm/madvise: enhance lazyfreeing with mTHP in madvise_free"
     optimizes the freeing of these things.

   - Kemeng Shi has added more userspace-visible writeback
     instrumentation in the series "Improve visibility of writeback".

   - Kemeng Shi then sent some maintenance work on top in the series
     "Fix and cleanups to page-writeback".

   - Matthew Wilcox reduces mmap_lock traffic in the anon vma code in
     the series "Improve anon_vma scalability for anon VMAs". Intel's
     test bot reported an improbable 3x improvement in one test.

   - SeongJae Park adds some DAMON feature work in the series
	"mm/damon: add a DAMOS filter type for page granularity access recheck"
	"selftests/damon: add DAMOS quota goal test"

   - Also some maintenance work in the series
	"mm/damon/paddr: simplify page level access re-check for pageout"
	"mm/damon: misc fixes and improvements"

   - David Hildenbrand has disabled some known-to-fail selftests ni the
     series "selftests: mm: cow: flag vmsplice() hugetlb tests as
     XFAIL".

   - memcg metadata storage optimizations from Shakeel Butt in "memcg:
     reduce memory consumption by memcg stats".

   - DAX fixes and maintenance work from Vishal Verma in the series
     "dax/bus.c: Fixups for dax-bus locking""

* tag 'mm-stable-2024-05-17-19-19' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (426 commits)
  memcg, oom: cleanup unused memcg_oom_gfp_mask and memcg_oom_order
  selftests/mm: hugetlb_madv_vs_map: avoid test skipping by querying hugepage size at runtime
  mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_wp
  mm/hugetlb: add missing VM_FAULT_SET_HINDEX in hugetlb_fault
  selftests: cgroup: add tests to verify the zswap writeback path
  mm: memcg: make alloc_mem_cgroup_per_node_info() return bool
  mm/damon/core: fix return value from damos_wmark_metric_value
  mm: do not update memcg stats for NR_{FILE/SHMEM}_PMDMAPPED
  selftests: cgroup: remove redundant enabling of memory controller
  Docs/mm/damon/maintainer-profile: allow posting patches based on damon/next tree
  Docs/mm/damon/maintainer-profile: change the maintainer's timezone from PST to PT
  Docs/mm/damon/design: use a list for supported filters
  Docs/admin-guide/mm/damon/usage: fix wrong schemes effective quota update command
  Docs/admin-guide/mm/damon/usage: fix wrong example of DAMOS filter matching sysfs file
  selftests/damon: classify tests for functionalities and regressions
  selftests/damon/_damon_sysfs: use 'is' instead of '==' for 'None'
  selftests/damon/_damon_sysfs: find sysfs mount point from /proc/mounts
  selftests/damon/_damon_sysfs: check errors from nr_schemes file reads
  mm/damon/core: initialize ->esz_bp from damos_quota_init_priv()
  selftests/damon: add a test for DAMOS quota goal
  ...

Pull smb client fix from Steve French:
 "An important fix to address recent netfs regression (data corruption)"

* tag '6.10-rc-smb-fix' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix data corruption in read after invalidate

Pull ext4 updates from Ted Ts'o:

 - more folio conversion patches

 - add support for FS_IOC_GETFSSYSFSPATH

 - mballoc cleaups and add more kunit tests

 - sysfs cleanups and bug fixes

 - miscellaneous bug fixes and cleanups

* tag 'ext4_for_linus-6.10-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (40 commits)
  ext4: fix error pointer dereference in ext4_mb_load_buddy_gfp()
  jbd2: add prefix 'jbd2' for 'shrink_type'
  jbd2: use shrink_type type instead of bool type for __jbd2_journal_clean_checkpoint_list()
  ext4: fix uninitialized ratelimit_state->lock access in __ext4_fill_super()
  ext4: remove calls to to set/clear the folio error flag
  ext4: propagate errors from ext4_sb_bread() in ext4_xattr_block_cache_find()
  ext4: fix mb_cache_entry's e_refcnt leak in ext4_xattr_block_cache_find()
  jbd2: remove redundant assignement to variable err
  ext4: remove the redundant folio_wait_stable()
  ext4: fix potential unnitialized variable
  ext4: convert ac_buddy_page to ac_buddy_folio
  ext4: convert ac_bitmap_page to ac_bitmap_folio
  ext4: convert ext4_mb_init_cache() to take a folio
  ext4: convert bd_buddy_page to bd_buddy_folio
  ext4: convert bd_bitmap_page to bd_bitmap_folio
  ext4: open coding repeated check in next_linear_group
  ext4: use correct criteria name instead stale integer number in comment
  ext4: call ext4_mb_mark_free_simple to free continuous bits in found chunk
  ext4: add test_mb_mark_used_cost to estimate cost of mb_mark_used
  ext4: keep "prefetch_grp" and "nr" consistent
  ...

Pull nfsd updates from Chuck Lever:
 "This is a light release containing mostly optimizations, code clean-
  ups, and minor bug fixes. This development cycle has focused on non-
  upstream kernel work:

   1. Continuing to build upstream CI for NFSD, based on kdevops

   2. Backporting NFSD filecache-related fixes to selected LTS kernels

  One notable new feature in v6.10 NFSD is the addition of a new netlink
  protocol dedicated to configuring NFSD. A new user space tool,
  nfsdctl, is to be added to nfs-utils. Lots more to come here.

  As always I am very grateful to NFSD contributors, reviewers, testers,
  and bug reporters who participated during this cycle"

* tag 'nfsd-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/cel/linux: (29 commits)
  NFSD: Force all NFSv4.2 COPY requests to be synchronous
  SUNRPC: Fix gss_free_in_token_pages()
  NFS/knfsd: Remove the invalid NFS error 'NFSERR_OPNOTSUPP'
  knfsd: LOOKUP can return an illegal error value
  nfsd: set security label during create operations
  NFSD: Add COPY status code to OFFLOAD_STATUS response
  NFSD: Record status of async copy operation in struct nfsd4_copy
  SUNRPC: Remove comment for sp_lock
  NFSD: add listener-{set,get} netlink command
  SUNRPC: add a new svc_find_listener helper
  SUNRPC: introduce svc_xprt_create_from_sa utility routine
  NFSD: add write_version to netlink command
  NFSD: convert write_threads to netlink command
  NFSD: allow callers to pass in scope string to nfsd_svc
  NFSD: move nfsd_mutex handling into nfsd_svc callers
  lockd: host: Remove unnecessary statements＇host = NULL;＇
  nfsd: don't create nfsv4recoverydir in nfsdfs when not used.
  nfsd: optimise recalculate_deny_mode() for a common case
  nfsd: add tracepoint in mark_client_expired_locked
  nfsd: new tracepoint for check_slot_seqid
  ...

Pull rdma updates from Jason Gunthorpe:
 "Aside from the usual things this has an arch update for
  __iowrite64_copy() used by the RDMA drivers.

  This API was intended to generate large 64 byte MemWr TLPs on PCI.
  These days most processors had done this by just repeating writel() in
  a loop. S390 and some new ARM64 designs require a special helper to
  get this to generate.

   - Small improvements and fixes for erdma, efa, hfi1, bnxt_re

   - Fix a UAF crash after module unload on leaking restrack entry

   - Continue adding full RDMA support in mana with support for EQs,
     GID's and CQs

   - Improvements to the mkey cache in mlx5

   - DSCP traffic class support in hns and several bug fixes

   - Cap the maximum number of MADs in the receive queue to avoid OOM

   - Another batch of rxe bug fixes from large scale testing

   - __iowrite64_copy() optimizations for write combining MMIO memory

   - Remove NULL checks before dev_put/hold()

   - EFA support for receive with immediate

   - Fix a recent memleaking regression in a cma error path"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (70 commits)
  RDMA/cma: Fix kmemleak in rdma_core observed during blktests nvme/rdma use siw
  RDMA/IPoIB: Fix format truncation compilation errors
  bnxt_re: avoid shift undefined behavior in bnxt_qplib_alloc_init_hwq
  RDMA/efa: Support QP with unsolicited write w/ imm. receive
  IB/hfi1: Remove generic .ndo_get_stats64
  IB/hfi1: Do not use custom stat allocator
  RDMA/hfi1: Use RMW accessors for changing LNKCTL2
  RDMA/mana_ib: implement uapi for creation of rnic cq
  RDMA/mana_ib: boundary check before installing cq callbacks
  RDMA/mana_ib: introduce a helper to remove cq callbacks
  RDMA/mana_ib: create and destroy RNIC cqs
  RDMA/mana_ib: create EQs for RNIC CQs
  RDMA/core: Remove NULL check before dev_{put, hold}
  RDMA/ipoib: Remove NULL check before dev_{put, hold}
  RDMA/mlx5: Remove NULL check before dev_{put, hold}
  RDMA/mlx5: Track DCT, DCI and REG_UMR QPs as diver_detail resources.
  RDMA/core: Add an option to display driver-specific QPs in the rdmatool
  RDMA/efa: Add shutdown notifier
  RDMA/mana_ib: Fix missing ret value
  IB/mlx5: Use __iowrite64_copy() for write combining stores
  ...

Pull HSI update from Sebastian Reichel:

 - convert to platform remove callback returning void

* tag 'hsi-for-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-hsi:
  HSI: omap_ssi_port: Convert to platform remove callback returning void
  HSI: omap_ssi_core: Convert to platform remove callback returning void

Pull power supply and reset updates from Sebastian Reichel:

 - core: simplify POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR handling

 - test-power: add POWER_SUPPLY_PROP_CHARGE_BEHAVIOUR support

 - chrome EC drivers: add ID based probing

 - bq27xxx: simplify update loop to reduce I2C traffic

 - max8903 binding: fix GPIO polarity description

* tag 'for-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
  dt-bindings: power: supply: max8903: specify flt-gpios as input
  power: supply: bq27xxx: Move health reading out of update loop
  power: supply: bq27xxx: Move cycle count reading out of update loop
  power: supply: bq27xxx: Move energy reading out of update loop
  power: supply: bq27xxx: Move charge reading out of update loop
  power: supply: bq27xxx: Move time reading out of update loop
  power: supply: bq27xxx: Move temperature reading out of update loop
  power: supply: cros_pchg: provide ID table for avoiding fallback match
  power: supply: cros_usbpd: provide ID table for avoiding fallback match
  power: supply: core: simplify charge_behaviour formatting
  power: supply: test-power: implement charge_behaviour property

Pull clk updates from Stephen Boyd:
 "I'm actually surprised this time. There aren't any new Qualcomm SoC
  clk drivers. And there's zero diff in the core clk framework.

  Instead we have new clk drivers for STM and Sophgo, with
  Samsung^WGoogle in third for the diffstat because they introduced HSI0
  and HSI2 clk drivers for Google's GS101 SoC (high speed interface
  things like PCIe, UFS, and MMC).

  Beyond those big diffs there's the usual updates to various clk
  drivers for incorrect parent descriptions or mising
  MODULE_DEVICE_TABLE()s, etc. Nothing in particular stands out as super
  interesting here.

  New Drivers:
   - STM32MP257 SoC clk driver
   - Airoha EN7581 SoC clk driver
   - Sophgo CV1800B, CV1812H and SG2000 SoC clk driver
   - Loongson-2k0500 and Loongson-2k2000 SoC clk driver
   - Add HSI0 and HSI2 clock controllers for Google GS101
   - Add i.MX95 BLK CTL clock driver

  Updates:
   - Allocate clk_ops dynamically for SCMI clk driver
   - Add support in qcom RCG and RCG2 for multiple configurations for
     the same frequency
   - Use above support for IPQ8074 NSS port 5 and 6 clocks to resolve
     issues
   - Fix the Qualcomm APSS IPQ5018 PLL to fix boot failures of some
     boards
   - Cleanups and fixes for Qualcomm Stromer PLLs
   - Reduce max CPU frequency on Qualcomm APSS IPQ5018
   - Fix Kconfig dependencies of Qualcomm SM8650 GPU and SC8280XP camera
     clk drivers
   - Make Qualcomm MSM8998 Venus clocks functional
   - Cleanup downstream remnants related to DisplayPort across Qualcomm
     SM8450, SM6350, SM8550, and SM8650
   - Reuse the Huayra APSS register map on Qualcomm MSM8996 CBF PLL
   - Use a specific Qualcomm QCS404 compatible for the otherwise generic
     HFPLL
   - Remove Qualcomm SM8150 CPUSS AHB clk as it is unused
   - Remove an unused field in the Qualcomm RPM clk driver
   - Add missing MODULE_DEVICE_TABLE to Qualcomm MSM8917 and MSM8953
     global clock controller drivers
   - Allow choice of manual or firmware-driven control over PLLs, needed
     to fully implement CPU clock controllers on Exynos850
   - Correct PLL clock IDs on ExynosAutov9
   - Propagate certain clock rates to allow setting proper SPI clock
     rates on Google GS101
   - Mark certain Google GS101 clocks critical
   - Convert old S3C64xx clock controller bindings to DT schema
   - Add new PLL rate and missing mux on Rockchip rk3568
   - Add missing reset line on Rockchip rk3588
   - Removal of an unused field in struct rockchip_mmc_clock
   - Amlogic s4/a1: add regmap maximum register for proper debugfs dump
   - Amlogic s4: add MODULE_DEVICE_TABLE() on pll and periph controllers
   - Amlogic pll driver: print clock name on lock error to help debug
   - Amlogic vclk: finish dsi clock path support
   - Amlogic license: fix occurence "GPL v2" as reported by checkpatch
   - Add PM runtime support to i.MX8MP Audiomix
   - Add DT schema for i.MX95 Display Master Block Control
   - Convert to platform remove callback returning void for i.MX8MP
     Audiomix
   - Add SPI (MSIOF) and external interrupt (INTC-EX) clocks on Renesas
     R-Car V4M
   - Add interrupt controller (PLIC) clock and reset on Renesas RZ/Five
   - Prepare power domain support for Renesas RZ/G2L family members, and
     add actual support on Renesas RZ/G3S SoC
   - Add thermal, serial (SCIF), and timer (CMT/TMU) clocks on Renesas
     R-Car V4M
   - Add additional constraints to Allwinner A64 PLL MIPI clock
   - Fix autoloading sunxi-ng clocks when build as a module"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (118 commits)
  clk: samsung: Don't register clkdev lookup for the fixed rate clocks
  clk, reset: microchip: mpfs: fix incorrect preprocessor conditions
  clk: qcom: clk-alpha-pll: fix rate setting for Stromer PLLs
  clk: qcom: apss-ipq-pll: fix PLL rate for IPQ5018
  clk: qcom: Fix SM_GPUCC_8650 dependencies
  clk: qcom: Fix SC_CAMCC_8280XP dependencies
  dt-bindings: clocks: stm32mp25: add access-controllers description
  clock, reset: microchip: move all mpfs reset code to the reset subsystem
  clk: samsung: gs101: drop unused HSI2 clock parent data
  clk: rockchip: rk3568: Add PLL rate for 724 MHz
  clk: rockchip: Remove an unused field in struct rockchip_mmc_clock
  dt-bindings: clock: fixed: Define a preferred node name
  clk: meson: s4: fix module autoloading
  clk: samsung: gs101: mark some apm UASC and XIU clocks critical
  clk: imx: imx8mp: Convert to platform remove callback returning void
  clk: imx: imx8mp: Switch to RUNTIME_PM_OPS()
  clk: bcm: rpi: Assign ->num before accessing ->hws
  clk: bcm: dvp: Assign ->num before accessing ->hws
  clk: samsung: gs101: add support for cmu_hsi2
  clk: samsung: gs101: add support for cmu_hsi0
  ...

Pull Kbuild updates from Masahiro Yamada:

 - Avoid 'constexpr', which is a keyword in C23

 - Allow 'dtbs_check' and 'dt_compatible_check' run independently of
   'dt_binding_check'

 - Fix weak references to avoid GOT entries in position-independent code
   generation

 - Convert the last use of 'optional' property in arch/sh/Kconfig

 - Remove support for the 'optional' property in Kconfig

 - Remove support for Clang's ThinLTO caching, which does not work with
   the .incbin directive

 - Change the semantics of $(src) so it always points to the source
   directory, which fixes Makefile inconsistencies between upstream and
   downstream

 - Fix 'make tar-pkg' for RISC-V to produce a consistent package

 - Provide reasonable default coverage for objtool, sanitizers, and
   profilers

 - Remove redundant OBJECT_FILES_NON_STANDARD, KASAN_SANITIZE, etc.

 - Remove the last use of tristate choice in drivers/rapidio/Kconfig

 - Various cleanups and fixes in Kconfig

* tag 'kbuild-v6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (46 commits)
  kconfig: use sym_get_choice_menu() in sym_check_prop()
  rapidio: remove choice for enumeration
  kconfig: lxdialog: remove initialization with A_NORMAL
  kconfig: m/nconf: merge two item_add_str() calls
  kconfig: m/nconf: remove dead code to display value of bool choice
  kconfig: m/nconf: remove dead code to display children of choice members
  kconfig: gconf: show checkbox for choice correctly
  kbuild: use GCOV_PROFILE and KCSAN_SANITIZE in scripts/Makefile.modfinal
  Makefile: remove redundant tool coverage variables
  kbuild: provide reasonable defaults for tool coverage
  modules: Drop the .export_symbol section from the final modules
  kconfig: use menu_list_for_each_sym() in sym_check_choice_deps()
  kconfig: use sym_get_choice_menu() in conf_write_defconfig()
  kconfig: add sym_get_choice_menu() helper
  kconfig: turn defaults and additional prompt for choice members into error
  kconfig: turn missing prompt for choice members into error
  kconfig: turn conf_choice() into void function
  kconfig: use linked list in sym_set_changed()
  kconfig: gconf: use MENU_CHANGED instead of SYMBOL_CHANGED
  kconfig: gconf: remove debug code
  ...