The smc code never checks the sk_write_pending sock field.
Thus there is no need to update it.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Let smc_clc_send_decline() return with an error, if the amount
sent is smaller than the length of an smc decline message.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

smc_close_active_abort() is used in smc_close.c only.
Make it static.
Signed-off-by: Ursula Braun <ubraun@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Introduce a configuration option: CONFIG_NET_DSA_LEGACY allowing to compile out
support for the old platform device and Device Tree binding registration.
Support for these configurations is scheduled to be removed in 4.17.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

On some dual port NICs, the 2 ports have to be configured with compatible
link speeds.  Under some conditions, a port's configured speed may no
longer be supported.  The firmware will send a message to the driver
when this happens.

Improve this logic that prints out the warning by only printing it if
we can determine the link speed that is no longer supported.  If the
speed is unknown or it is in autoneg mode, skip the warning message.
Reported-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: Michael Chan <michael.chan@broadcom.com>
Tested-by: Thomas Bogendoerfer <tbogendoerfer@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

The recv flow of ipvlan l2 mode performs as same as l3 mode for
non-multicast packet, so use the existing func ipvlan_handle_mode_l3
instead of these duplicated statements in non-multicast case.
Signed-off-by: Gao Feng <gfree.wind@vip.163.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Currently, whenever the NETIF_F_HW_TC feature changes, we silently
always allow it, but we actually do not disable the flows in HW
on disable. That breaks user's expectations. So just forbid
the feature disable in case there are any filters offloaded.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The statement no longer serves a purpose.

Commit fa35864e ("tuntap: Fix for a race in accessing numqueues")
added the ACCESS_ONCE to avoid a race condition with skb_queue_len.

Commit 436acceb ("tuntap: remove unnecessary sk_receive_queue
length check during xmit") removed the affected skb_queue_len check.

Commit 96f84061 ("tun: add eBPF based queue selection method")
split the function, reading the field a second time in the callee.
The temp variable is now only read once, so just remove it.
Signed-off-by: Willem de Bruijn <willemb@google.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

t_name cannot be NULL since it is an array field of a struct.
Replacing null check on static array with string length check using
strnlen()
Signed-off-by: Prashant Bhole <bhole_prashant_q7@lab.ntt.co.jp>
Acked-by: Sowmini Varadhan <sowmini.varadhan@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

TC actions are no longer freed in RCU callbacks and we should
always have RTNL lock, so this spinlock is no longer needed.

Cc: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcfm_dev always points to the correct netdev and we already
hold a refcnt, so no need to use tcfm_ifindex to lookup again.

If we would support moving target netdev across netns, using
pointer would be better than ifindex.

This also fixes dumping obsolete ifindex, now after the
target device is gone we just dump 0 as ifindex.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

William Tu says:

====================
ipv6: add ip6erspan collect_md mode

Similar to erspan collect_md mode in ipv4, the first patch adds
support for ip6erspan collect metadata mode.  The second patch
adds the test case using bpf_skb_[gs]et_tunnel_key helpers.

The corresponding iproute2 patch:
https://marc.info/?l=linux-netdev&m=151251545410047&w=2
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Extend the existing tests for ip6erspan.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Similar to ip6 gretap and ip4 gretap, the patch allows
erspan tunnel to operate in collect metadata mode.
bpf_skb_[gs]et_tunnel_key() helpers can make use of
it right away.
Signed-off-by: William Tu <u9012063@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Smatch warns that:

    drivers/net/ethernet/broadcom/bnxt/bnxt_tc.c:160 bnxt_tc_parse_actions()
    error: uninitialized symbol 'rc'.

"rc" is either uninitialized or set to zero here so we can just remove
the check.

Fixes: 8c95f773 ("bnxt_en: add support for Flower based vxlan encap/decap offload")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Michael Chan <michael.chan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Julia Cartwright says:

====================
macb rx filter cleanups

Here's a proper patchset based on net-next.

v1 -> v2:
  - Rebased on net-next
  - Add Nicolas's Acks
  - Reorder commits, putting the list_empty() cleanups prior to the
    others.
  - Added commit reverting the GFP_ATOMIC change.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

Now that the rx_fs_lock is no longer held across allocation, it's safe
to use GFP_KERNEL for allocating new entries.

This reverts commit 81da3bf6 ("net: macb: change GFP_KERNEL to
GFP_ATOMIC").

Cc: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Commit ae8223de ("net: macb: Added support for RX filtering")
introduces a lock, rx_fs_lock which is intended to protect the list of
rx_flow items and synchronize access to the hardware rx filtering
registers.

However, the region protected by this lock is overscoped, unnecessarily
including things like slab allocation.  Reduce this lock scope to only
include operations which must be performed atomically: list traversal,
addition, and removal, and hitting the macb filtering registers.

This fixes the use of kmalloc w/ GFP_KERNEL in atomic context.

Fixes: ae8223de ("net: macb: Added support for RX filtering")
Cc: Rafal Ozieblo <rafalo@cadence.com>
Cc: Julia Lawall <julia.lawall@lip6.fr>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The list_for_each_entry() macro already handles the case where the list
is empty (by not executing the loop body).  It's not necessary to handle
this case specially, so stop doing so.

Cc: Rafal Ozieblo <rafalo@cadence.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Julia Cartwright <julia@ni.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

No one actually uses it.

Cc: Jiri Pirko <jiri@mellanox.com>
Cc: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Vivien Didelot says:

====================
net: dsa: use per-port upstream port

An upstream port is a local switch port used to reach a CPU port.

DSA still considers a unique CPU port in the whole switch fabric and
thus return a unique upstream port for a given switch. This is wrong in
a multiple CPU ports environment.

We are now switching to using the dedicated CPU port assigned to each
port in order to get rid of the deprecated unique tree CPU port.

This patchset makes the dsa_upstream_port() helper take a port argument
and goes one step closer complete support for multiple CPU ports.

Changes in v2:
  - reverse-christmas-tree-fy variables
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

The current dsa_upstream_port() helper still assumes a unique CPU port
in the whole switch fabric. This is becoming wrong, as every port in the
fabric has its dedicated CPU port, thus every port has an upstream port.

Add a port argument to the dsa_upstream_port() helper and fetch its CPU
port instead of the deprecated unique fabric CPU port. A CPU or unused
port has no dedicated CPU port, so return itself in this case.

At the same time, change the return value from u8 to unsigned int since
there is no need to limit the size here.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

DSA ports also need to have a dedicated CPU port assigned to them,
because they need to know where to egress frames targeting the CPU,
e.g. To_Cpu frames received on a Marvell Tag port.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Move the setup of the global upstream port within the
mv88e6xxx_setup_upstream_port function.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Add a helper function to setup the upstream port of a given port.

This is the port used to reach the dedicated CPU port. This function
will be extended later to setup the global upstream port as well.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

The mv88e6xxx driver currently assumes a single CPU port in the fabric
and thus floods frames with unknown DA on a single DSA port, the one
that is one hop closer to the CPU port.

With multiple CPU ports in mind, this isn't true anymore because CPU
ports could be found behind both DSA ports of a device in-between
others.

For example in a A <-> B <-> C fabric, both A and C having CPU ports,
device B will have to flood such frame to its two DSA ports.

This patch considers both CPU and DSA ports of a device as upstream
ports, where to flood frames with unknown DA addresses.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Alexander Aring says:

====================
net: sched: sch_api: fix coding style issues for extack

this patch prepares to handle extack for qdiscs and fixes checkpatch
issues.

There are a bunch of warnings issued by checkpatch which bothered me.
This first patchset is to get rid of those warnings to make way for
the next patchsets.

I plan to followup with qdiscs, classifiers and actions after this.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fixes the following checkpatch error:

ERROR: do not use assignment in if condition

by rearranging the if condition to execute init callback only if init
callback exists. The whole setup afterwards is called in any case,
doesn't matter if init callback is set or not. This patch has the same
behaviour as before, just without assign err variable in if condition.
It also makes the code easier to read.
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

This patch fix checkpatch issues for upcomming patches according to the
sched api file. It changes checking on null pointer, remove unnecessary
brackets, add variable names for parameters and adjust 80 char width.

Cc: David Ahern <dsahern@gmail.com>
Signed-off-by: Alexander Aring <aring@mojatatu.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Simon Horman says:

====================
nfp: enhanced debug dump via ethtool

Add debug dump implementation to the NFP driver. This makes use of
existing ethtool infrastructure.  ethtool -W is used to select the dump
level and ethtool -w is used to dump NFP state.

The existing behaviour of dump level 0, dumping the arm.diag resource, is
preserved. Dump levels greater than 0 are implemented by this patchset and
optionally supported by firmware providing a _abi_dump_spec rtsym. This
rtsym provides a specification, in TLV format, of the information to be
dumped from the NFP at each supported dump level.

Dumps are also structured using a TLVs. They consist a prolog and the data
described int he corresponding dump.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>

- The spec defines CSR address ranges for indirect ME CSRs. For Each TLV
  chunk in the spec, dump a chunk that includes the spec and the data
  over the defined address range.
- Each indirect CSR has 8 contexts. To read one context, first write the
  context to a specific derived address, read it back, and then read the
  register value.
- For each address, read and dump all 8 contexts in this manner.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- The spec defines CSR address ranges for these types.
- Dump each TLV chunk in the spec as a chunk that includes the spec and
  the data over the defined address range.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Dump FW name as TLV, based on dump specification.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Add spec TLV for hwinfo field, containing key string as data.
- Add dump TLV for hwinfo field, with data being key and value as packed
  zero-terminated strings.
- If specified hwinfo field is not found, dump the spec TLV as -ENOENT
  error.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Dump hwinfo as separate TLV chunk, in a packed format containing
  zero-separated key and value strings.
- This provides additional debug context, if requested by the dumpspec.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Support rtsym TLVs.
- If specified rtsym is not found, dump the spec TLV as -ENOENT error.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Perform dumpspec traversals for calculating size and populating the
  dump.
- Initially, wrap all spec TLVs in dump error TLVs (changed by later
  patches in the series).
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Use a TLV structure, with the typed chunks aligned to 8-byte sizes.
- Dump numeric fields as big-endian.
- Prolog contains the dump level.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Load the TLV-based binary specification of what needs to be included in
a dump, from the "_abi_dump_spec" rtsymbol. If the symbol is not defined,
then dumps for levels >= 1 are not supported.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

- Skeleton code to perform a binary debug dump via ethtoolops
  "set_dump", "get_dump_flags" and "get_dump_data", i.e. the ethtool
  -W/w mechanism.
- Skeleton functions for debugdump operations provided.
- An integer "dump level" can be specified, this is stored between
  ethtool invocations. Dump level 0 is still the "arm.diag" resource for
  backward compatibility. Other dump levels each define a set of state
  information to include in the dump, driven by a spec from FW.
Signed-off-by: Carl Heymann <carl.heymann@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>