- 25 Oct, 2018 6 commits
-
-
Emil Velikov authored
A while back we removed it, yet that lead to regressions. At some later point, I've attempted to remove it again without fully grasping the unique (pun intended) situation that virtio is in. Add a bulky comment to document why the call should stay as-is, for the next person who's around. As a Tl;Dr: virtio sits on top of struct virtio_device, which confuses dev_is_pci(), wrong info gets sent to userspace and X doesn't start. Driver needs to explicitly call drm_dev_set_unique() to keep it working. v2: Fix handful of typos (Laszlo) Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Hans de Goede <hdegoede@redhat.com> Cc: Laszlo Ersek <lersek@redhat.com> Signed-off-by:
Emil Velikov <emil.velikov@collabora.com> Reviewed-by:
Laszlo Ersek <lersek@redhat.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181024144252.16518-1-emil.l.velikov@gmail.com
-
Emil Velikov authored
Previous commit removed the only reason why we were allowing NULL as a parent device. With that resolved, we can enforce nobody else does that mistake. With that we can drop the ugly drm_dev_set_unique workaround. v2: rebase, silence checkpatch "== NULL" warning Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: Deepak Sharma <deepak.sharma@amd.com> Signed-off-by:
Daniel Vetter <daniel.vetter@ffwll.ch> Link: https://patchwork.freedesktop.org/patch/msgid/20181023163550.15211-2-emil.l.velikov@gmail.com
-
Deepak Sharma authored
Modify vgem_init to take platform dev as parent in drm_dev_init. This will make drm device available at "/sys/devices/platform/vgem" in x86 chromebook. v2: rebase, address checkpatch typo and line over 80 characters Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by:
Deepak Sharma <deepak.sharma@amd.com> Reviewed-by:
Sean Paul <seanpaul@chromium.org> Signed-off-by:
-
Christian König authored
Set shared_max to the number of shared fences right before we release the lock. This way every attempt to add a shared fence without previously reserving a slot will cause an error. Signed-off-by:
Christian König <christian.koenig@amd.com> Reviewed-by:
Huang Rui <ray.huang@amd.com> Acked-by:
Junwei Zhang <Jerry.Zhang@amd.com> Link: https://patchwork.kernel.org/patch/10626147/
-
Christian König authored
Let's support simultaneous submissions to multiple engines. Signed-off-by:
Michel Dänzer <michel.daenzer@amd.com> Reviewed-by:
-
Christian König authored
No need for that any more. Just replace the list when there isn't enough room any more for the additional fence. Signed-off-by:
-
- 24 Oct, 2018 15 commits
-
-
Sean Paul authored
Fixes the following warnings: ../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' ../drivers/gpu/drm/drm_connector.c:306: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' ../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' ../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' ../drivers/gpu/drm/drm_connector.c:305: warning: Excess function parameter 'dev' description in 'drm_connector_attach_edid_property' Fixes: 6b7e2d5c ("drm: add drm_connector_attach_edid_property()") Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: dri-devel@lists.freedesktop.org Reviewed-by:
Alex Deucher <alexander.deucher@amd.com> Signed-off-by:
-
Lyude Paul authored
There's no reason to track the atomic state three times. Unfortunately, this is currently what we're doing, and even worse is that there is only one actually correct state pointer: the one in mst_state->base.state. mgr->state never seems to be used, along with the one in mst_state->state. This confused me for over 4 hours until I realized there was no magic behind these pointers. So, let's save everyone else from the trouble. Signed-off-by: Lyude Paul <lyude@redhat.com>. Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by:
-
Lyude Paul authored
Because we have drm_dp_atomic_find_vcpi_slots(), which actually takes care to update the atomic state of the MST topology, prints valuable debugging output, and actually takes references to the ports it's checking! This explains some incorrect usage I've been seeing across the tree... Signed-off-by:
Lyude Paul <lyude@redhat.com> Cc: Daniel Vetter <daniel@ffwll.ch> Reviewed-by:
-
Sean Paul authored
4.19 is out, Lyude asked for a backmerge, and it's been a while. All very good reasons on their own :-) Signed-off-by: -
Boris Brezillon authored
When vc4_plane_state is duplicated ->is_yuv is left assigned to its previous value, and we never set it back to false when switching to a non-YUV format. Fix that by setting ->is_yuv to false in the 'num_planes == 1' branch of the vc4_plane_setup_clipping_and_scaling() function. Fixes: fc04023f ("drm/vc4: Add support for YUV planes.") Cc: <stable@vger.kernel.org> Signed-off-by:
Boris Brezillon <boris.brezillon@bootlin.com> Reviewed-by:
Eric Anholt <eric@anholt.net> Link: https://patchwork.freedesktop.org/patch/msgid/20181009132446.21960-1-boris.brezillon@bootlin.com
-
Boris Brezillon authored
X/Y positioning of T-format buffers is quite tricky and the current implementation was failing to position a plane using this format correctly when the CRTC X, Y or both X and Y offsets were negative. It was also failing when the SRC X/Y offsets were != 0. Signed-off-by:
-
Boris Brezillon authored
The offset adjustment depends on the framebuffer modified, so let's just move this operation in the DRM_FORMAT_MOD_LINEAR case inside vc4_plane_mode_set(). This we'll be able to fix offset calculation for DRM_FORMAT_MOD_BROADCOM_VC4_T_TILED and DRM_FORMAT_MOD_BROADCOM_SANDXXX. Signed-off-by:
-
Boris Brezillon authored
drm_atomic_helper_check_plane_state() takes care of checking the scaling capabilities and calculating the clipped X/Y offsets for us. Rely on this function instead of open-coding the logic. Incidentally, it seems to fix a problem we had with negative X/Y positioning of YUV planes. Signed-off-by:
-
Eric Anholt authored
This is needed to support X/Y negative placement of planes using T-format buffers. Signed-off-by:
-
Eric Anholt authored
Y_OFFSET field starts at bit 8 not 7. Signed-off-by:
-
Linus Walleij authored
The Samsung S6D16D0 is a simple comman mode only DSI display that is used on the ST-Ericsson Ux500 reference design TVK1281618 user interface board (UIB). Cc: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by:
Sam Ravnborg <sam@ravnborg.org> Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20181023074630.29186-2-linus.walleij@linaro.org
-
Linus Walleij authored
This adds the device tree bindings for the Samsung S6D16D0 panel. This is a command mode only panel using DSI. Cc: devicetree@vger.kernel.org Cc: Andrzej Hajda <a.hajda@samsung.com> Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Linus Walleij authored
The DSI devices have a maximum operating frequency specified in their data sheet per the MIPI specification, and DSI hosts that can scale their frequency need this information to set their clock dividers right. As current panel drivers often lack this information, specify that setting it to zero will make the DSI host use some reasonable default. Reviewed-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
-
Daniel Vetter authored
We recently bikeshedded this to a different flavour, but forgot to update the recommendations. Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by:
Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by:
Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181019084311.23836-1-daniel.vetter@ffwll.ch
-
Daniel Vetter authored
Shuts up warning noise. Reviewed-by:
Alexandru Gheorghe <alexandru-cosmin.gheorghe@arm.com> Signed-off-by:
-
- 23 Oct, 2018 7 commits
-
-
Mamta Shukla authored
Use PTR_ERR_OR_ZERO rather than if(IS_ERR(...)) + PTR_ERR because its better to have inlined function rather than code-opened implementation. Signed-off-by:
Mamta Shukla <mamtashukla555@gmail.com> Reviewed-by:
Sean Paul <sean@poorly.run> Signed-off-by:
-
Souptick Joarder authored
Replace dma_alloc_coherent + memset with dma_zalloc_coherent. Signed-off-by:
Souptick Joarder <jrdr.linux@gmail.com> Signed-off-by:
-
Eugeniy Paltsev authored
UDL doesn't support vblank functionality so we don't need to initialize vblank here (we are able to send page flip completion events even without vblank initialization) Moreover current drm_vblank_init call with num_crtcs > 0 causes sending DRM_EVENT_FLIP_COMPLETE event with zero timestamp every time. This breaks userspace apps (for example weston) which relies on timestamp value. Cc: stable@vger.kernel.org Signed-off-by:
Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by:
-
Souptick Joarder authored
convert drm_atomic_helper_suspend/resume() to use drm_mode_config_helper_suspend/resume(). remove suspend_state field from the rcar_du_device structure as it is no more required. With this conversion, also drm_fbdev_cma_set_suspend_unlocked() will left with no consumer. So this function can be removed. Signed-off-by:
Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by:
-
Chunming Zhou authored
v2: add a mutex between sync_cb execution and free. v3: clearly separating the roles for pt_lock and cb_mutex (Chris) v4: the cb_mutex should be taken outside of the pt_lock around this if() block. (Chris) v5: fix a corner case v6: tidy drm_syncobj_fence_get_or_add_callback up. (Chris) Tested by syncobj_basic and syncobj_wait of igt. Signed-off-by:
Chunming Zhou <david1.zhou@amd.com> Cc: Daniel Vetter <daniel@ffwll.ch> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Christian König <christian.koenig@amd.com> Cc: intel-gfx@lists.freedesktop.org Reviewed-by:
-
Aaron Ma authored
If failed to find the deivice owning the boot framebuffer, try to use the first VGA device instead of the last one. Usually the 1st device is integrated GPU who owns the boot framebuffer. Signed-off-by:
Aaron Ma <aaron.ma@canonical.com> Acked-by:
-
Aaron Ma authored
EFI GOP uses 64-bit frame buffer address when some BIOS disabled CSM support. vgaarb only stores lfb_base, this will lead boot framebuffer to wrong device. Add ext_lfb_base support to use 64-bit fb address. Signed-off-by:
-
- 22 Oct, 2018 2 commits
-
-
Alexandru Gheorghe authored
The idea is to split test implementations in different compilation units, but have one single place where we define the list of tests, in this case(drm_modeset_selftests.h). Signed-off-by:
-
Alexandru Gheorghe authored
In-line member documentation seems to be desired way of documenting structure members. This change had been suggested by Daniel Vetter here: https://lists.freedesktop.org/archives/dri-devel/2018-October/192176.htmlSigned-off-by:
Maxime Ripard <maxime.ripard@bootlin.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181019105752.17741-2-alexandru-cosmin.gheorghe@arm.com
-
- 20 Oct, 2018 1 commit
-
-
Manasi Navare authored
VESA eDP 1.4 specification has separate fields defined in EDP_DPCD_REV for eDP 1.4a and 1.4b eDP revisions. This patch defines those. Found this when one of my eDP panels advertises eDP 1.4a (04h) in the EDP_DPCD_REV DPCD field. Cc: Jani Nikula <jani.nikula@intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Signed-off-by:
Manasi Navare <manasi.d.navare@intel.com> Reviewed-by:
Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181009002351.23085-1-manasi.d.navare@intel.com
-
- 19 Oct, 2018 1 commit
-
-
Dave Airlie authored
Merge tag 'drm-intel-next-fixes-2018-10-18' of git://anongit.freedesktop.org/drm/drm-intel into drm-next - Fix GPU hang on MacBook2,1 when booting in EFI mode (Bugzilla #105637) - Fix garbled console on Y tiled BIOS framebuffer configs (Bugzilla #108264) - Fix black screen on certain eDP panels eg. Dell XPS 9350 (Bugzilla #107489 and #105338) - MST fixes that Rodrigo dropped from drm-intel-fixes and bunch of Icelake fixes - Then assorted proactive code fixes caught by CI or developers Signed-off-by:
Dave Airlie <airlied@redhat.com> From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181018165725.GA2281@jlahtine-desk.ger.corp.intel.com
-
- 18 Oct, 2018 8 commits
-
-
Christoph Hellwig authored
The DMA API does its own zone decisions based on the coherent_dma_mask. Signed-off-by:
Christoph Hellwig <hch@lst.de> Reviewed-by:
Benjamin Gaignard <benjamin.gaignard@linaro.org> Signed-off-by:
-
Benjamin Gaignard authored
Wait until the next vblank to be sure that crtc has been disabled. Signed-off-by:
-
Chunming Zhou authored
This patch is for VK_KHR_timeline_semaphore extension, semaphore is called syncobj in kernel side: This extension introduces a new type of syncobj that has an integer payload identifying a point in a timeline. Such timeline syncobjs support the following operations: * CPU query - A host operation that allows querying the payload of the timeline syncobj. * CPU wait - A host operation that allows a blocking wait for a timeline syncobj to reach a specified value. * Device wait - A device operation that allows waiting for a timeline syncobj to reach a specified value. * Device signal - A device operation that allows advancing the timeline syncobj to a specified value. v1: Since it's a timeline, that means the front time point(PT) always is signaled before the late PT. a. signal PT design: Signal PT fence N depends on PT[N-1] fence and signal opertion fence, when PT[N] fence is signaled, the timeline will increase to value of PT[N]. b. wait PT design: Wait PT fence is signaled by reaching timeline point value, when timeline is increasing, will compare wait PTs value with new timeline value, if PT value is lower than timeline value, then wait PT will be signaled, otherwise keep in list. syncobj wait operation can wait on any point of timeline, so need a RB tree to order them. And wait PT could ahead of signal PT, we need a sumission fence to perform that. v2: 1. remove unused DRM_SYNCOBJ_CREATE_TYPE_NORMAL. (Christian) 2. move unexposed denitions to .c file. (Daniel Vetter) 3. split up the change to drm_syncobj_find_fence() in a separate patch. (Christian) 4. split up the change to drm_syncobj_replace_fence() in a separate patch. 5. drop the submission_fence implementation and instead use wait_event() for that. (Christian) 6. WARN_ON(point != 0) for NORMAL type syncobj case. (Daniel Vetter) v3: 1. replace normal syncobj with timeline implemenation. (Vetter and Christian) a. normal syncobj signal op will create a signal PT to tail of signal pt list. b. normal syncobj wait op will create a wait pt with last signal point, and this wait PT is only signaled by related signal point PT. 2. many bug fix and clean up 3. stub fence moving is moved to other patch. v4： 1. fix RB tree loop with while(node=rb_first(...)). (Christian) 2. fix syncobj lifecycle. (Christian) 3. only enable_signaling when there is wait_pt. (Christian) 4. fix timeline path issues. 5. write a timeline test in libdrm v5: (Christian) 1. semaphore is called syncobj in kernel side. 2. don't need 'timeline' characters in some function name. 3. keep syncobj cb. v6: (Christian) 1. merge syncobj_timeline to syncobj structure. 2. simplify some check sentences. 3. some misc change. 4. fix CTS failed issue. v7: (Christian) 1. error handling when creating signal pt. 2. remove timeline naming in func. 3. export flags in find_fence. 4. allow reset timeline. v8: 1. use wait_event_interruptible without timeout 2. rename _TYPE_INDIVIDUAL to _TYPE_BINARY v9: 1. rename signal_pt->base to signal_pt->fence_array to avoid misleading 2. improve kerneldoc individual syncobj is tested by ./deqp-vk -n dEQP-VK*semaphore* timeline syncobj is tested by ./amdgpu_test -s 9 Signed-off-by: -
Anusha Srivatsa authored
Add missing MODULE_FIRMWARE while loading DMC ICL. v2: Add Fixes tag. (Rodrigo) v3: Rebase by Rodrigo after commit 7fe78985 ("drm/i915/csr: restructure CSR firmware definition macros") v4: Rodrigo fixing his own mess on commit mentioning on v3 comment above. Fixes: 4445930f ("firmware/dmc/icl: load v1.07 on icelake.") Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by:
Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> (v2) Signed-off-by:
Rodrigo Vivi <rodrigo.vivi@intel.com> Tested-by:
Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20181004223613.19938-1-rodrigo.vivi@intel.com (cherry picked from commit 00e5d8b1) Signed-off-by:
Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
-
Rodrigo Vivi authored
Since when it was introduced we forgot to add this case so ICL was using a wrong signal_levels as reference. Fixes: fb5c8e9d ("drm/i915/icl: Implement voltage swing programming sequence for Combo PHY DDI") Cc: José Roberto de Souza <jose.souza@intel.com> Cc: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by:
-
Mahesh Kumar authored
DDI/TC clock-off bits are not equally distanced. TC1-3 bits are from offset 12 & TC4 is at offset 21. Create a function to choose correct clk-off bit. v2: Add fixes tag (Lucas) Fixes: c27e917e ("drm/i915/icl: add basic support for the ICL clocks") Signed-off-by:
Mahesh Kumar <mahesh1.kumar@intel.com> Signed-off-by:
Vandita Kulkarni <vandita.kulkarni@intel.com> Reviewed-by:
Lucas De Marchi <lucas.demarchi@intel.com> Signed-off-by:
-
Mahesh Kumar authored
This patch creates a function/wrapper to check if port is combophy port instead of explicitly comparing ports. Changes since V1: - keep all intel_port_is_* helper together (Lucas) Signed-off-by:
-
git://people.freedesktop.org/~agd5f/linuxDave Airlie authored
Fixes for 4.20. Highlights: - VCN DPG fixes for Picasso - Add support for the latest vega20 vbios - Scheduler timeout fix - License fixes for radeon and amdgpu - Misc other fixes Signed-off-by:
-
