- 28 Apr, 2016 2 commits
-
-
Stanislaw Gruszka authored
napi_disable() can not be called with bh disabled, move locking just around myri10ge_ss_lock_napi() . Patches fixes following bug: [ 114.278378] BUG: sleeping function called from invalid context at net/core/dev.c:4383 <snip> [ 114.313712] Call Trace: [ 114.314943] [<ffffffff817010ce>] dump_stack+0x19/0x1b [ 114.317673] [<ffffffff810ce7f3>] __might_sleep+0x173/0x230 [ 114.320566] [<ffffffff815b3117>] napi_disable+0x27/0x90 [ 114.323254] [<ffffffffa01e437f>] myri10ge_close+0xbf/0x3f0 [myri10ge] Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Acked-by: Hyong-Youb Kim <hykim@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eric Engestrom authored
Signed-off-by: Eric Engestrom <eric@engestrom.ch> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 27 Apr, 2016 4 commits
-
-
David S. Miller authored
Michael Chan says: ==================== bnxt_en: Bug fixes for net. Only use MSIX on VF, and fix rx page buffers on architectures with PAGE_SIZE >= 64K. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
If PAGE_SIZE is bigger than BNXT_RX_PAGE_SIZE, that means the native CPU page is bigger than the maximum length of the RX BD. Divide the page into multiple 32K buffers for the aggregation ring. Add an offset field in the bnxt_sw_rx_agg_bd struct to keep track of the page offset of each buffer. Since each page can be referenced by multiple buffer entries, call get_page() as needed to get the proper reference count. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
The RX BD length field of this device is 16-bit, so the largest buffer size is 65535. For LRO and GRO, we allocate native CPU pages for the aggregation ring buffers. It won't work if the native CPU page size is 64K or bigger. We fix this by defining BNXT_RX_PAGE_SIZE to be native CPU page size up to 32K. Replace PAGE_SIZE with BNXT_RX_PAGE_SIZE in all appropriate places related to the rx aggregation ring logic. The next patch will add additional logic to divide the page into 32K chunks for aggrgation ring buffers if PAGE_SIZE is bigger than BNXT_RX_PAGE_SIZE. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Michael Chan authored
Only MSI-X can be used on a VF. The driver should fail initialization if it cannot successfully enable MSI-X. Signed-off-by: Michael Chan <michael.chan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 26 Apr, 2016 9 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: 1) Handle v4/v6 mixed sockets properly in soreuseport, from Craig Gallak. 2) Bug fixes for the new macsec facility (missing kmalloc NULL checks, missing locking around netdev list traversal, etc.) from Sabrina Dubroca. 3) Fix handling of host routes on ifdown in ipv6, from David Ahern. 4) Fix double-fdput in bpf verifier. From Jann Horn. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (31 commits) bpf: fix double-fdput in replace_map_fd_with_map_ptr() net: ipv6: Delete host routes on an ifdown Revert "ipv6: Revert optional address flusing on ifdown." net/mlx4_en: fix spurious timestamping callbacks net: dummy: remove note about being Y by default cxgbi: fix uninitialized flowi6 ipv6: Revert optional address flusing on ifdown. ipv4/fib: don't warn when primary address is missing if in_dev is dead net/mlx5: Add pci shutdown callback net/mlx5_core: Remove static from local variable net/mlx5e: Use vport MTU rather than physical port MTU net/mlx5e: Fix minimum MTU net/mlx5e: Device's mtu field is u16 and not int net/mlx5_core: Add ConnectX-5 to list of supported devices net/mlx5e: Fix MLX5E_100BASE_T define net/mlx5_core: Fix soft lockup in steering error flow qlcnic: Update version to 5.3.64 net: stmmac: socfpga: Remove re-registration of reset controller macsec: fix netlink attribute validation macsec: add missing macsec prefix in uapi ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds authored
Pull ARM SoC fixes from Arnd Bergmann: "Here are the latest bug fixes for ARM SoCs, mostly addressing recent regressions. Changes are across several platforms, so I'm listing every change separately here. Regressions since 4.5: - A correction of the psci firmware DT binding, to prevent users from relying on unintended semantics - Actually getting the newly merged clock driver for some OMAP platforms to work - A revert of patches for the Qualcomm BAM, these need to be reworked for 4.7 to avoid breaking boards other than the one they were intended for - A correction for the I2C device nodes on the Socionext Uniphier platform - i.MX SDHCI was broken for non-DT platforms due to a change with the setting of the DMA mask - A revert of a patch that accidentally added a nonexisting clock on the Rensas "Porter" board - A couple of OMAP fixes that are all related to suspend after the power domain changes for dra7 - On Mediatek, revert part of the power domain initialization changes that broke mt8173-evb Fixes for older bugs: - Workaround for an "external abort" in the omap34xx suspend/resume code. - The USB1/eSATA should not be listed as an excon device on am57xx-beagle-x15 (broken since v4.0) - A v4.5 regression in the TI AM33xx and AM43XX DT specifying incorrect DMA request lines for the GPMC - The jiffies calibration on Renesas platforms was incorrect for some modern CPU cores. - A hardware errata woraround for clockdomains on TI DRA7" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: drivers: firmware: psci: unify enable-method binding on ARM {64,32}-bit systems arm64: dts: uniphier: fix I2C nodes of PH1-LD20 ARM: shmobile: timer: Fix preset_lpj leading to too short delays Revert "ARM: dts: porter: Enable SCIF_CLK frequency and pins" ARM: dts: r8a7791: Don't disable referenced optional clocks Revert "ARM: OMAP: Catch callers of revision information prior to it being populated" ARM: OMAP3: Fix external abort on 36xx waking from off mode idle ARM: dts: am57xx-beagle-x15: remove extcon_usb1 ARM: dts: am437x: Fix GPMC dma properties ARM: dts: am33xx: Fix GPMC dma properties Revert "soc: mediatek: SCPSYS: Fix double enabling of regulators" ARM: mach-imx: sdhci-esdhc-imx: initialize DMA mask ARM: DRA7: clockdomain: Implement timer workaround for errata i874 ARM: OMAP: Catch callers of revision information prior to it being populated ARM: dts: dra7: Correct clock tree for sys_32k_ck ARM: OMAP: DRA7: Provide proper class to omap2_set_globals_tap ARM: OMAP: DRA7: wakeupgen: Skip SAR save for wakeupgen Revert "dts: msm8974: Add dma channels for blsp2_i2c1 node" Revert "dts: msm8974: Add blsp2_bam dma node" ARM: dts: Add clocks for dm814x ADPLL
-
Linus Torvalds authored
This is more prep-work for the upcoming pty changes. Still just code cleanup with no actual semantic changes. This removes a bunch pointless complexity by just having the slave pty side remember the dentry associated with the devpts slave rather than the inode. That allows us to remove all the "look up the dentry" code for when we want to remove it again. Together with moving the tty pointer from "inode->i_private" to "dentry->d_fsdata" and getting rid of pointless inode locking, this removes about 30 lines of code. Not only is the end result smaller, it's simpler and easier to understand. The old code, for example, depended on the d_find_alias() to not just find the dentry, but also to check that it is still hashed, which in turn validated the tty pointer in the inode. That is a _very_ roundabout way to say "invalidate the cached tty pointer when the dentry is removed". The new code just does dentry->d_fsdata = NULL; in devpts_pty_kill() instead, invalidating the tty pointer rather more directly and obviously. Don't do something complex and subtle when the obvious straightforward approach will do. The rest of the patch (ie apart from code deletion and the above tty pointer clearing) is just switching the calling convention to pass the dentry or file pointer around instead of the inode. Cc: Eric Biederman <ebiederm@xmission.com> Cc: Peter Anvin <hpa@zytor.com> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Peter Hurley <peter@hurleysoftware.com> Cc: Serge Hallyn <serge.hallyn@ubuntu.com> Cc: Willy Tarreau <w@1wt.eu> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Alan Cox <gnomes@lxorguk.ukuu.org.uk> Cc: Jann Horn <jann@thejh.net> Cc: Greg KH <greg@kroah.com> Cc: Jiri Slaby <jslaby@suse.com> Cc: Florian Weimer <fw@deneb.enyo.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
-
Jann Horn authored
When bpf(BPF_PROG_LOAD, ...) was invoked with a BPF program whose bytecode references a non-map file descriptor as a map file descriptor, the error handling code called fdput() twice instead of once (in __bpf_map_get() and in replace_map_fd_with_map_ptr()). If the file descriptor table of the current task is shared, this causes f_count to be decremented too much, allowing the struct file to be freed while it is still in use (use-after-free). This can be exploited to gain root privileges by an unprivileged user. This bug was introduced in commit 0246e64d ("bpf: handle pseudo BPF_LD_IMM64 insn"), but is only exploitable since commit 1be7f75d ("bpf: enable non-root eBPF programs") because previously, CAP_SYS_ADMIN was required to reach the vulnerable code. (posted publicly according to request by maintainer) Signed-off-by: Jann Horn <jannh@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Acked-by: Alexei Starovoitov <ast@kernel.org> Acked-by: Daniel Borkmann <daniel@iogearbox.net> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David Ahern authored
It was a simple idea -- save IPv6 configured addresses on a link down so that IPv6 behaves similar to IPv4. As always the devil is in the details and the IPv6 stack as too many behavioral differences from IPv4 making the simple idea more complicated than it needs to be. The current implementation for keeping IPv6 addresses can panic or spit out a warning in one of many paths: 1. IPv6 route gets an IPv4 route as its 'next' which causes a panic in rt6_fill_node while handling a route dump request. 2. rt->dst.obsolete is set to DST_OBSOLETE_DEAD hitting the WARN_ON in fib6_del 3. Panic in fib6_purge_rt because rt6i_ref count is not 1. The root cause of all these is references related to the host route for an address that is retained. So, this patch deletes the host route every time the ifdown loop runs. Since the host route is deleted and will be re-generated an up there is no longer a need for the l3mdev fix up. On the 'admin up' side move addrconf_permanent_addr into the NETDEV_UP event handling so that it runs only once versus on UP and CHANGE events. All of the current panics and warnings appear to be related to addresses on the loopback device, but given the catastrophic nature when a bug is triggered this patch takes the conservative approach and evicts all host routes rather than trying to determine when it can be re-used and when it can not. That can be a later optimizaton if desired. Signed-off-by: David Ahern <dsa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts commit 841645b5. Ok, this puts the feature back. I've decided to apply David A.'s bug fix and run with that rather than make everyone wait another whole release for this feature. Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sudeep Holla authored
Currently ARM CPUs DT bindings allows different enable-method value for PSCI based systems. On ARM 64-bit this property is required and must be "psci" while on ARM 32-bit systems this property is optional and must be "arm,psci" if present. However, "arm,psci" has always been the compatible string for the PSCI node, and was never intended to be the enable-method. So this is a bug in the binding and not a deliberate attempt at specifying 32-bit differently. This is problematic if 32-bit OS is run on 64-bit system which has "psci" as enable-method rather than the expected "arm,psci". So let's unify the value into "psci" and remove support for "arm,psci" before it finds any users. Reported-by: Soby Mathew <Soby.Mathew@arm.com> Cc: Rob Herring <robh+dt@kernel.org> Acked-by: Mark Rutland <mark.rutland@arm.com> Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-
Eric Dumazet authored
When multiple skb are TX-completed in a row, we might incorrectly keep a timestamp of a prior skb and cause extra work. Fixes: ec693d47 ("net/mlx4_en: Add HW timestamping (TS) support") Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Willem de Bruijn <willemb@google.com> Reviewed-by: Eran Ben Elisha <eranbe@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Ivan Babrou authored
Signed-off-by: Ivan Babrou <ivan@cloudflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 25 Apr, 2016 5 commits
-
-
Jiri Benc authored
ip6_route_output looks into different fields in the passed flowi6 structure, yet cxgbi passes garbage in nearly all those fields. Zero the structure out first. Fixes: fc8d0590 ("libcxgbi: Add ipv6 api to driver") Signed-off-by: Jiri Benc <jbenc@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
This reverts the following three commits: 70af921d 799977d9 f1705ec1 The feature was ill conceived, has terrible semantics, and has added nothing but regressions to the already fragile ipv6 stack. Fixes: f1705ec1 ("net: ipv6: Make address flushing on ifdown optional") Signed-off-by: David S. Miller <davem@davemloft.net>
-
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6Linus Torvalds authored
Pull crypto fixes from Herbert Xu: "This fixes a couple of regressions in the talitos driver that were introduced back in 4.3. The first bug causes a crash when the driver's AEAD functionality is used while the second bug prevents its AEAD feature from working once you get past the first bug" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: crypto: talitos - fix AEAD tcrypt tests crypto: talitos - fix crash in talitos_cra_init()
-
Kevin Hilman authored
Merge tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes Enable dm814x and dra62x clock driver. This branch has a dependency to the clk-ti branch from the Linux clk tree for the ADPLL clock driver. Otherwise things won't keep booting properly when we flip over to use the clock driver instead of fixed clocks set up by the bootloader. * tag 'omap-for-v4.6/dt-ti81xx-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: Add clocks for dm814x ADPLL
-
Paolo Abeni authored
After commit fbd40ea0 ("ipv4: Don't do expensive useless work during inetdev destroy.") when deleting an interface, fib_del_ifaddr() can be executed without any primary address present on the dead interface. The above is safe, but triggers some "bug: prim == NULL" warnings. This commit avoids warning if the in_dev is dead Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
- 24 Apr, 2016 20 commits
-
-
Linus Torvalds authored
-
David S. Miller authored
Saeed Mahameed says: ==================== mlx5 driver updates and fixes Changes from V0: - Dropped: ("net/mlx5e: Reset link modes upon setting speed to zero") - Fixed compilation issue introduced to mlx5_ib driver. - Rebased to df637193 ('Revert "Prevent NUll pointer dereference with two PHYs on cpsw"') This series has few bug fixes for mlx5 core and ethernet driver. Eli fixed a wrong static local variable declaration in flow steering API. Majd added the support of ConnectX-5 PF and VF and added the support for kernel shutdown pci callback for more robust reboot procedures. Maor fixed a soft lockup in flow steering. Rana fixed a wrog speed define in mlx5 EN driver. I also had the chance to introduce some bug fixes in mlx5 EN mtu reporting and handling. For -stable: net/mlx5_core: Fix soft lockup in steering error flow net/mlx5e: Device's mtu field is u16 and not int net/mlx5e: Fix minimum MTU net/mlx5e: Use vport MTU rather than physical port MTU ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Majd Dibbiny authored
This patch introduces kexec support for mlx5. When switching kernels, kexec() calls shutdown, which unloads the driver and cleans its resources. In addition, remove unregister netdev from shutdown flow. This will allow a clean shutdown, even if some netdev clients did not release their reference from this netdev. Releasing The HW resources only is enough as the kernel is shutting down Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Tariq Toukan <tariqt@mellanox.com> Signed-off-by: Haggai Abramovsky <hagaya@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Eli Cohen authored
The static is not required and breaks re-entrancy if it will be required. Fixes: 25302363 ("net/mlx5_core: Flow steering tree initialization") Signed-off-by: Eli Cohen <eli@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
Set and report vport MTU rather than physical MTU, Driver will set both vport and physical port mtu and will rely on the query of vport mtu. SRIOV VFs have to report their MTU to their vport manager (PF), and this will allow them to work with any MTU they need without failing the request. Also for some cases where the PF is not a port owner, PF can work with MTU less than the physical port mtu if set physical port mtu didn't take effect. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
Minimum MTU that can be set in Connectx4 device is 68. This fixes the case where a user wants to set invalid MTU, the driver will fail to satisfy this request and the interface will stay down. It is better to report an error and continue working with old mtu. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Saeed Mahameed authored
For set/query MTU port firmware commands the MTU field is 16 bits, here I changed all the "int mtu" parameters of the functions wrapping those firmware commands to be u16. Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Majd Dibbiny authored
Add the upcoming ConnectX-5 devices (PF and VF) to the list of supported devices by the mlx5 driver. Signed-off-by: Majd Dibbiny <majd@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Rana Shahout authored
Bit 25 of eth_proto_capability in PTYS register is 1000Base-TT and not 100Base-T. Fixes: f62b8bb8 ('net/mlx5: Extend mlx5_core to support ConnectX-4 Ethernet functionality') Signed-off-by: Rana Shahout <ranas@mellanox.com> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Maor Gottlieb authored
In the error flow of adding flow rule to auto-grouped flow table, we call to tree_remove_node. tree_remove_node locks the node's parent, however the node's parent is already locked by mlx5_add_flow_rule and this causes a deadlock. After this patch, if we failed to add the flow rule, we unlock the flow table before calling to tree_remove_node. fixes: f0d22d18 ('net/mlx5_core: Introduce flow steering autogrouped flow table') Signed-off-by: Maor Gottlieb <maorg@mellanox.com> Reported-by: Amir Vadai <amir@vadai.me> Signed-off-by: Saeed Mahameed <saeedm@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Manish Chopra authored
Just updating the version as many fixes got accumulated over 5.3.63 Signed-off-by: Manish Chopra <manish.chopra@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Marek Vasut authored
Both socfpga_dwmac_parse_data() in dwmac-socfpga.c and stmmac_dvr_probe() in stmmac_main.c functions call devm_reset_control_get() to register an reset controller for the stmmac. This results in an attempt to register two reset controllers for the same non-shared reset line. The first attempt to register the reset controller works fine. The second attempt fails with warning from the reset controller core, see below. The warning is produced because the reset line is non-shared and thus it is allowed to have only up-to one reset controller associated with that reset line, not two or more. The solution has multiple parts. First, the original socfpga_dwmac_init() is tweaked to use reset controller pointer from the stmmac_priv (private data of the stmmac core) instead of the local instance, which was used before. The local re-registration of the reset controller is removed. Next, the socfpga_dwmac_init() is moved after stmmac_dvr_probe() in the probe function. This order is legal according to Altera and it makes the code much easier, since there is no need to temporarily register and unregister the reset controller ; the reset controller is already registered by the stmmac_dvr_probe(). Finally, plat_dat->exit and socfpga_dwmac_exit() is no longer necessary, since the functionality is already performed by the stmmac core. ------------[ cut here ]------------ WARNING: CPU: 0 PID: 1 at drivers/reset/core.c:187 __of_reset_control_get+0x218/0x270 Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.6.0-rc4-next-20160419-00015-gabb2477-dirty #4 Hardware name: Altera SOCFPGA [<c010f290>] (unwind_backtrace) from [<c010b82c>] (show_stack+0x10/0x14) [<c010b82c>] (show_stack) from [<c0373da4>] (dump_stack+0x94/0xa8) [<c0373da4>] (dump_stack) from [<c011bcc0>] (__warn+0xec/0x104) [<c011bcc0>] (__warn) from [<c011bd88>] (warn_slowpath_null+0x20/0x28) [<c011bd88>] (warn_slowpath_null) from [<c03a6eb4>] (__of_reset_control_get+0x218/0x270) [<c03a6eb4>] (__of_reset_control_get) from [<c03a701c>] (__devm_reset_control_get+0x54/0x90) [<c03a701c>] (__devm_reset_control_get) from [<c041fa30>] (stmmac_dvr_probe+0x1b4/0x8e8) [<c041fa30>] (stmmac_dvr_probe) from [<c04298c8>] (socfpga_dwmac_probe+0x1b8/0x28c) [<c04298c8>] (socfpga_dwmac_probe) from [<c03d6ffc>] (platform_drv_probe+0x4c/0xb0) [<c03d6ffc>] (platform_drv_probe) from [<c03d54ec>] (driver_probe_device+0x224/0x2bc) [<c03d54ec>] (driver_probe_device) from [<c03d5630>] (__driver_attach+0xac/0xb0) [<c03d5630>] (__driver_attach) from [<c03d382c>] (bus_for_each_dev+0x6c/0xa0) [<c03d382c>] (bus_for_each_dev) from [<c03d4ad4>] (bus_add_driver+0x1a4/0x21c) [<c03d4ad4>] (bus_add_driver) from [<c03d60ac>] (driver_register+0x78/0xf8) [<c03d60ac>] (driver_register) from [<c0101760>] (do_one_initcall+0x40/0x170) [<c0101760>] (do_one_initcall) from [<c0800e38>] (kernel_init_freeable+0x1dc/0x27c) [<c0800e38>] (kernel_init_freeable) from [<c05d1bd4>] (kernel_init+0x8/0x114) [<c05d1bd4>] (kernel_init) from [<c01076f8>] (ret_from_fork+0x14/0x3c) ---[ end trace 059d2fbe87608fa9 ]--- Signed-off-by: Marek Vasut <marex@denx.de> Cc: Matthew Gerlach <mgerlach@opensource.altera.com> Cc: Dinh Nguyen <dinguyen@opensource.altera.com> Cc: David S. Miller <davem@davemloft.net> Tested-by: Dinh Nguyen <dinguyen@opensource.altera.com> Signed-off-by: David S. Miller <davem@davemloft.net>
-
David S. Miller authored
Sabrina Dubroca says: ==================== macsec: a few fixes Some small fixes for the macsec driver: - possible NULL pointer dereferences - netlink dumps fixes: RTNL locking, consistent dumps - a reference counting bug - wrong name for uapi constant - a few memory leaks Patches 1 to 5 are the same as in v1, patches 6 to 9 are new. Patch 6 fixes the memleak that Lance spotted in v1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
macsec_validate_attr should check IFLA_MACSEC_REPLAY_PROTECT (not IFLA_MACSEC_PROTECT) to verify that the replay protection and replay window arguments are correct. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
I accidentally forgot some MACSEC_ prefixes in if_macsec.h. Fixes: dece8d2b ("uapi: add MACsec bits") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Reported-by: Lance Richardson <lrichard@redhat.com> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
We leak a struct macsec_rxh_data when we unregister the rx_handler in macsec_dellink. We also leak a struct macsec_rxh_data in register_macsec_dev if we fail to register the rx_handler. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
Use genl_dump_check_consistent in dump_secy. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Suggested-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
The decrypt callback macsec_decrypt_done needs a reference on the rx_sa and releases it before returning, but macsec_handle_frame already put that reference after macsec_decrypt returned NULL. Set rx_sa to NULL when the decrypt callback runs so that macsec_handle_frame knows it must not release the reference. Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-
Sabrina Dubroca authored
The "deliver:" path of macsec_handle_frame can be called with rx_sa == NULL. Check rx_sa != NULL before calling macsec_rxsa_put(). Fixes: c09440f7 ("macsec: introduce IEEE 802.1AE driver") Signed-off-by: Sabrina Dubroca <sd@queasysnail.net> Acked-by: Hannes Frederic Sowa <hannes@stressinduktion.org> Signed-off-by: David S. Miller <davem@davemloft.net>
-