- 03 Jul, 2018 10 commits
-
-
Daniel Glöckner authored
[ Upstream commit ebc3dd68 ] It has been observed that writing 0xF2 to the power register while it reads as 0xF4 results in the register having the value 0xF0, i.e. clearing RESUME and setting SUSPENDM in one go does not work. It might also violate the USB spec to transition directly from resume to suspend, especially when not taking T_DRSMDN into account. But this is what happens when a remote wakeup occurs between SetPortFeature USB_PORT_FEAT_SUSPEND on the root hub and musb_bus_suspend being called. This commit returns -EBUSY when musb_bus_suspend is called while remote wakeup is signalled and thus avoids to reset the RESUME bit. Ignoring this error when musb_port_suspend is called from musb_hub_control is ok. Signed-off-by:
Daniel Glöckner <dg@emlix.com> Signed-off-by:
Bin Liu <b-liu@ti.com> Signed-off-by:
Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by:
Sasha Levin <alexander.levin@microsoft.com> Signed-off-by:
-
Liu Bo authored
[ Upstream commit 8810f751 ] There is a scenario that can end up with rebuild process failing to return good content, i.e. suppose that all disks can be read without problems and if the content that was read out doesn't match its checksum, currently for raid6 btrfs at most retries twice, - the 1st retry is to rebuild with all other stripes, it'll eventually be a raid5 xor rebuild, - if the 1st fails, the 2nd retry will deliberately fail parity p so that it will do raid6 style rebuild, however, the chances are that another non-parity stripe content also has something corrupted, so that the above retries are not able to return correct content, and users will think of this as data loss. More seriouly, if the loss happens on some important internal btree roots, it could refuse to mount. This extends btrfs to do more retries and each retry fails only one stripe. Since raid6 can tolerate 2 disk failures, if there is one more failure besides the failure on which we're recovering, this can always work. The worst case is to retry as many times as the number of raid6 disks, but given the fact that such a scenario is really rare in practice, it's still acceptable. Signed-off-by:
Liu Bo <bo.li.liu@oracle.com> Signed-off-by:
David Sterba <dsterba@suse.com> Signed-off-by:
-
Eric Dumazet authored
commit 02db5571 upstream. While rcvbuf is properly clamped by tcp_rmem[2], rcvwin is left to a potentially too big value. It has no serious effect, since : 1) tcp_grow_window() has very strict checks. 2) window_clamp can be mangled by user space to any value anyway. tcp_init_buffer_space() and companions use tcp_full_space(), we use tcp_win_from_space() to avoid reloading sk->sk_rcvbuf Signed-off-by:
Eric Dumazet <edumazet@google.com> Acked-by:
Soheil Hassas Yeganeh <soheil@google.com> Acked-by:
Wei Wang <weiwan@google.com> Acked-by:
Neal Cardwell <ncardwell@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net> Cc: Benjamin Gilbert <benjamin.gilbert@coreos.com> Signed-off-by:
Guenter Roeck <linux@roeck-us.net> Signed-off-by:
-
Sasha Levin authored
This reverts commit 95b286da. This commit used an incorrect log message. Reported-by:
Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by:
-
Finn Thain authored
[ Upstream commit 26de0b76 ] With CONFIG_DMA_API_DEBUG=y, calling sonic_open() produces the message, "DMA-API: device driver failed to check map error". Add the missing dma_mapping_error() call. Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
-
Josh Hill authored
[ Upstream commit 2415f3bd ] Add support for Netgear Aircard 779S Signed-off-by:
Josh Hill <josh@joshuajhill.com> Acked-by:
Bjørn Mork <bjorn@mork.no> Signed-off-by:
-
Ivan Bornyakov authored
[ Upstream commit f9c6442a ] memcmp() returns int, but eprom_try_esi() cast it to unsigned char. One can lose significant bits and get 0 from non-0 value returned by the memcmp(). Signed-off-by:
Ivan Bornyakov <brnkv.i1@gmail.com> Signed-off-by:
-
Julian Anastasov authored
[ Upstream commit 52f96757 ] syzkaller reports for buffer overflow for interface name when starting sync daemons [1] What we do is that we copy user structure into larger stack buffer but later we search NUL past the stack buffer. The same happens for sched_name when adding/editing virtual server. We are restricted by IP_VS_SCHEDNAME_MAXLEN and IP_VS_IFNAME_MAXLEN being used as size in include/uapi/linux/ip_vs.h, so they include the space for NUL. As using strlcpy is wrong for unsafe source, replace it with strscpy and add checks to return EINVAL if source string is not NUL-terminated. The incomplete strlcpy fix comes from 2.6.13. For the netlink interface reduce the len parameter for IPVS_DAEMON_ATTR_MCAST_IFN and IPVS_SVC_ATTR_SCHED_NAME, so that we get proper EINVAL. [1] kernel BUG at lib/string.c:1052! invalid opcode: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 1 PID: 373 Comm: syz-executor936 Not tainted 4.17.0-rc4+ #45 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:fortify_panic+0x13/0x20 lib/string.c:1051 RSP: 0018:ffff8801c976f800 EFLAGS: 00010282 RAX: 0000000000000022 RBX: 0000000000000040 RCX: 0000000000000000 RDX: 0000000000000022 RSI: ffffffff8160f6f1 RDI: ffffed00392edef6 RBP: ffff8801c976f800 R08: ffff8801cf4c62c0 R09: ffffed003b5e4fb0 R10: ffffed003b5e4fb0 R11: ffff8801daf27d87 R12: ffff8801c976fa20 R13: ffff8801c976fae4 R14: ffff8801c976fae0 R15: 000000000000048b FS: 00007fd99f75e700(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c0 CR3: 00000001d6843000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: strlen include/linux/string.h:270 [inline] strlcpy include/linux/string.h:293 [inline] do_ip_vs_set_ctl+0x31c/0x1d00 net/netfilter/ipvs/ip_vs_ctl.c:2388 nf_sockopt net/netfilter/nf_sockopt.c:106 [inline] nf_setsockopt+0x7d/0xd0 net/netfilter/nf_sockopt.c:115 ip_setsockopt+0xd8/0xf0 net/ipv4/ip_sockglue.c:1253 udp_setsockopt+0x62/0xa0 net/ipv4/udp.c:2487 ipv6_setsockopt+0x149/0x170 net/ipv6/ipv6_sockglue.c:917 tcp_setsockopt+0x93/0xe0 net/ipv4/tcp.c:3057 sock_common_setsockopt+0x9a/0xe0 net/core/sock.c:3046 __sys_setsockopt+0x1bd/0x390 net/socket.c:1903 __do_sys_setsockopt net/socket.c:1914 [inline] __se_sys_setsockopt net/socket.c:1911 [inline] __x64_sys_setsockopt+0xbe/0x150 net/socket.c:1911 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x447369 RSP: 002b:00007fd99f75dda8 EFLAGS: 00000246 ORIG_RAX: 0000000000000036 RAX: ffffffffffffffda RBX: 00000000006e39e4 RCX: 0000000000447369 RDX: 000000000000048b RSI: 0000000000000000 RDI: 0000000000000003 RBP: 0000000000000000 R08: 0000000000000018 R09: 0000000000000000 R10: 00000000200001c0 R11: 0000000000000246 R12: 00000000006e39e0 R13: 75a1ff93f0896195 R14: 6f745f3168746576 R15: 0000000000000001 Code: 08 5b 41 5c 41 5d 41 5e 41 5f 5d c3 0f 0b 48 89 df e8 d2 8f 48 fa eb de 55 48 89 fe 48 c7 c7 60 65 64 88 48 89 e5 e8 91 dd f3 f9 <0f> 0b 90 90 90 90 90 90 90 90 90 90 90 55 48 89 e5 41 57 41 56 RIP: fortify_panic+0x13/0x20 lib/string.c:1051 RSP: ffff8801c976f800 Reported-and-tested-by: syzbot+aac887f77319868646df@syzkaller.appspotmail.com Fixes: e4ff6751 ("ipvs: add sync_maxlen parameter for the sync daemon") Fixes: 4da62fc7 ("[IPVS]: Fix for overflows") Signed-off-by:
Julian Anastasov <ja@ssi.bg> Acked-by:
Simon Horman <horms+renesas@verge.net.au> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org> Signed-off-by:
-
Paolo Abeni authored
[ Upstream commit 94c752f9 ] strlcpy() can't be safely used on a user-space provided string, as it can try to read beyond the buffer's end, if the latter is not NULL terminated. Leveraging the above, syzbot has been able to trigger the following splat: BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline] BUG: KASAN: stack-out-of-bounds in compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] BUG: KASAN: stack-out-of-bounds in ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] BUG: KASAN: stack-out-of-bounds in size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] BUG: KASAN: stack-out-of-bounds in compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 Write of size 33 at addr ffff8801b0abf888 by task syz-executor0/4504 CPU: 0 PID: 4504 Comm: syz-executor0 Not tainted 4.17.0-rc2+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x1b9/0x294 lib/dump_stack.c:113 print_address_description+0x6c/0x20b mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report.cold.7+0x242/0x2fe mm/kasan/report.c:412 check_memory_region_inline mm/kasan/kasan.c:260 [inline] check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267 memcpy+0x37/0x50 mm/kasan/kasan.c:303 strlcpy include/linux/string.h:300 [inline] compat_mtw_from_user net/bridge/netfilter/ebtables.c:1957 [inline] ebt_size_mwt net/bridge/netfilter/ebtables.c:2059 [inline] size_entry_mwt net/bridge/netfilter/ebtables.c:2155 [inline] compat_copy_entries+0x96c/0x14a0 net/bridge/netfilter/ebtables.c:2194 compat_do_replace+0x483/0x900 net/bridge/netfilter/ebtables.c:2285 compat_do_ebt_set_ctl+0x2ac/0x324 net/bridge/netfilter/ebtables.c:2367 compat_nf_sockopt net/netfilter/nf_sockopt.c:144 [inline] compat_nf_setsockopt+0x9b/0x140 net/netfilter/nf_sockopt.c:156 compat_ip_setsockopt+0xff/0x140 net/ipv4/ip_sockglue.c:1279 inet_csk_compat_setsockopt+0x97/0x120 net/ipv4/inet_connection_sock.c:1041 compat_tcp_setsockopt+0x49/0x80 net/ipv4/tcp.c:2901 compat_sock_common_setsockopt+0xb4/0x150 net/core/sock.c:3050 __compat_sys_setsockopt+0x1ab/0x7c0 net/compat.c:403 __do_compat_sys_setsockopt net/compat.c:416 [inline] __se_compat_sys_setsockopt net/compat.c:413 [inline] __ia32_compat_sys_setsockopt+0xbd/0x150 net/compat.c:413 do_syscall_32_irqs_on arch/x86/entry/common.c:323 [inline] do_fast_syscall_32+0x345/0xf9b arch/x86/entry/common.c:394 entry_SYSENTER_compat+0x70/0x7f arch/x86/entry/entry_64_compat.S:139 RIP: 0023:0xf7fb3cb9 RSP: 002b:00000000fff0c26c EFLAGS: 00000282 ORIG_RAX: 000000000000016e RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000000000 RDX: 0000000000000080 RSI: 0000000020000300 RDI: 00000000000005f4 RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 The buggy address belongs to the page: page:ffffea0006c2afc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x2fffc0000000000() raw: 02fffc0000000000 0000000000000000 0000000000000000 00000000ffffffff raw: 0000000000000000 ffffea0006c20101 0000000000000000 0000000000000000 page dumped because: kasan: bad access detected Fix the issue replacing the unsafe function with strscpy() and taking care of possible errors. Fixes: 81e675c2 ("netfilter: ebtables: add CONFIG_COMPAT support") Reported-and-tested-by: syzbot+4e42a04e0bc33cb6c087@syzkaller.appspotmail.com Signed-off-by:
Paolo Abeni <pabeni@redhat.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit d9f92772 ] syzbot found a way to trigger an infinitie loop by overflowing @offset variable that has been forced to use u16 for some very obscure reason in the past. We probably want to look at NEXTHDR_FRAGMENT handling which looks wrong, in a separate patch. In net-next, we shall try to use skb_header_pointer() instead of pskb_may_pull(). watchdog: BUG: soft lockup - CPU#1 stuck for 134s! [syz-executor738:4553] Modules linked in: irq event stamp: 13885653 hardirqs last enabled at (13885652): [<ffffffff878009d5>] restore_regs_and_return_to_kernel+0x0/0x2b hardirqs last disabled at (13885653): [<ffffffff87800905>] interrupt_entry+0xb5/0xf0 arch/x86/entry/entry_64.S:625 softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_napi_alloc_frags drivers/net/tun.c:1478 [inline] softirqs last enabled at (13614028): [<ffffffff84df0809>] tun_get_user+0x1dd9/0x4290 drivers/net/tun.c:1825 softirqs last disabled at (13614032): [<ffffffff84df1b6f>] tun_get_user+0x313f/0x4290 drivers/net/tun.c:1942 CPU: 1 PID: 4553 Comm: syz-executor738 Not tainted 4.17.0-rc3+ #40 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:check_kcov_mode kernel/kcov.c:67 [inline] RIP: 0010:__sanitizer_cov_trace_pc+0x20/0x50 kernel/kcov.c:101 RSP: 0018:ffff8801d8cfe250 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13 RAX: ffff8801d88a8080 RBX: ffff8801d7389e40 RCX: 0000000000000006 RDX: 0000000000000000 RSI: ffffffff868da4ad RDI: ffff8801c8a53277 RBP: ffff8801d8cfe250 R08: ffff8801d88a8080 R09: ffff8801d8cfe3e8 R10: ffffed003b19fc87 R11: ffff8801d8cfe43f R12: ffff8801c8a5327f R13: 0000000000000000 R14: ffff8801c8a4e5fe R15: ffff8801d8cfe3e8 FS: 0000000000d88940(0000) GS:ffff8801daf00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffffffff600400 CR3: 00000001acab3000 CR4: 00000000001406e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: _decode_session6+0xc1d/0x14f0 net/ipv6/xfrm6_policy.c:150 __xfrm_decode_session+0x71/0x140 net/xfrm/xfrm_policy.c:2368 xfrm_decode_session_reverse include/net/xfrm.h:1213 [inline] icmpv6_route_lookup+0x395/0x6e0 net/ipv6/icmp.c:372 icmp6_send+0x1982/0x2da0 net/ipv6/icmp.c:551 icmpv6_send+0x17a/0x300 net/ipv6/ip6_icmp.c:43 ip6_input_finish+0x14e1/0x1a30 net/ipv6/ip6_input.c:305 NF_HOOK include/linux/netfilter.h:288 [inline] ip6_input+0xe1/0x5e0 net/ipv6/ip6_input.c:327 dst_input include/net/dst.h:450 [inline] ip6_rcv_finish+0x29c/0xa10 net/ipv6/ip6_input.c:71 NF_HOOK include/linux/netfilter.h:288 [inline] ipv6_rcv+0xeb8/0x2040 net/ipv6/ip6_input.c:208 __netif_receive_skb_core+0x2468/0x3650 net/core/dev.c:4646 __netif_receive_skb+0x2c/0x1e0 net/core/dev.c:4711 netif_receive_skb_internal+0x126/0x7b0 net/core/dev.c:4785 napi_frags_finish net/core/dev.c:5226 [inline] napi_gro_frags+0x631/0xc40 net/core/dev.c:5299 tun_get_user+0x3168/0x4290 drivers/net/tun.c:1951 tun_chr_write_iter+0xb9/0x154 drivers/net/tun.c:1996 call_write_iter include/linux/fs.h:1784 [inline] do_iter_readv_writev+0x859/0xa50 fs/read_write.c:680 do_iter_write+0x185/0x5f0 fs/read_write.c:959 vfs_writev+0x1c7/0x330 fs/read_write.c:1004 do_writev+0x112/0x2f0 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev fs/read_write.c:1109 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1109 do_syscall_64+0x1b1/0x800 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com> Signed-off-by:
-
- 16 Jun, 2018 25 commits
-
-
Greg Kroah-Hartman authored
-
Michael Ellerman authored
commit 1411b521 upstream. In the vmx AES init routines we do a printk(KERN_INFO ...) to report the fallback implementation we're using. However with a slow console this can significantly affect the speed of crypto operations. Using 'cryptsetup benchmark' the removal of the printk() leads to a ~5x speedup for aes-cbc decryption. So remove them. Fixes: 8676590a ("crypto: vmx - Adding AES routines for VMX module") Fixes: 8c755ace ("crypto: vmx - Adding CBC routines for VMX module") Fixes: 4f7f60d3 ("crypto: vmx - Adding CTR routines for VMX module") Fixes: cc333cd6 ("crypto: vmx - Adding GHASH routines for VMX module") Cc: stable@vger.kernel.org # v4.1+ Signed-off-by:
Michael Ellerman <mpe@ellerman.id.au> Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
-
Johannes Wienke authored
commit e6e7e9cd upstream. Add ELAN0612 to the list of supported touchpads; this ID is used in Lenovo v330 14IKB devices. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199253Signed-off-by:
Johannes Wienke <languitar@semipol.de> Cc: stable@vger.kernel.org Signed-off-by:
Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by:
-
Ethan Lee authored
commit 5ca4d1ae upstream. GPD Win 2 Website: http://www.gpd.hk/gpdwin2.asp Tested on a unit from the first production run sent to Indiegogo backers Signed-off-by:
Ethan Lee <flibitijibibo@gmail.com> Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
commit 3c9fa24c upstream. The functions that were used in the emulation of fxrstor, fxsave, sgdt and sidt were originally meant for task switching, and as such they did not check privilege levels. This is very bad when the same functions are used in the emulation of unprivileged instructions. This is CVE-2018-10853. The obvious fix is to add a new argument to ops->read_std and ops->write_std, which decides whether the access is a "system" access or should use the processor's CPL. Fixes: 129a72a0 ("KVM: x86: Introduce segmented_write_std", 2017-01-12) Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
-
Gil Kupfer authored
commit b23220fe upstream. The balloon.page field is used for two different purposes if batching is on or off. If batching is on, the field point to the page which is used to communicate with with the hypervisor. If it is off, balloon.page points to the page that is about to be (un)locked. Unfortunately, this dual-purpose of the field introduced a bug: when the balloon is popped (e.g., when the machine is reset or the balloon driver is explicitly removed), the balloon driver frees, unconditionally, the page that is held in balloon.page. As a result, if batching is disabled, this leads to double freeing the last page that is sent to the hypervisor. The following error occurs during rmmod when kernel checkers are on, and the balloon is not empty: [ 42.307653] ------------[ cut here ]------------ [ 42.307657] Kernel BUG at ffffffffba1e4b28 [verbose debug info unavailable] [ 42.307720] invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC [ 42.312512] Modules linked in: vmw_vsock_vmci_transport vsock ppdev joydev vmw_balloon(-) input_leds serio_raw vmw_vmci parport_pc shpchp parport i2c_piix4 nfit mac_hid autofs4 vmwgfx drm_kms_helper hid_generic syscopyarea sysfillrect usbhid sysimgblt fb_sys_fops hid ttm mptspi scsi_transport_spi ahci mptscsih drm psmouse vmxnet3 libahci mptbase pata_acpi [ 42.312766] CPU: 10 PID: 1527 Comm: rmmod Not tainted 4.12.0+ #5 [ 42.312803] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 09/30/2016 [ 42.313042] task: ffff9bf9680f8000 task.stack: ffffbfefc1638000 [ 42.313290] RIP: 0010:__free_pages+0x38/0x40 [ 42.313510] RSP: 0018:ffffbfefc163be98 EFLAGS: 00010246 [ 42.313731] RAX: 000000000000003e RBX: ffffffffc02b9720 RCX: 0000000000000006 [ 42.313972] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff9bf97e08e0a0 [ 42.314201] RBP: ffffbfefc163be98 R08: 0000000000000000 R09: 0000000000000000 [ 42.314435] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffc02b97e4 [ 42.314505] R13: ffffffffc02b9748 R14: ffffffffc02b9728 R15: 0000000000000200 [ 42.314550] FS: 00007f3af5fec700(0000) GS:ffff9bf97e080000(0000) knlGS:0000000000000000 [ 42.314599] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 42.314635] CR2: 00007f44f6f4ab24 CR3: 00000003a7d12000 CR4: 00000000000006e0 [ 42.314864] Call Trace: [ 42.315774] vmballoon_pop+0x102/0x130 [vmw_balloon] [ 42.315816] vmballoon_exit+0x42/0xd64 [vmw_balloon] [ 42.315853] SyS_delete_module+0x1e2/0x250 [ 42.315891] entry_SYSCALL_64_fastpath+0x23/0xc2 [ 42.315924] RIP: 0033:0x7f3af5b0e8e7 [ 42.315949] RSP: 002b:00007fffe6ce0148 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 42.315996] RAX: ffffffffffffffda RBX: 000055be676401e0 RCX: 00007f3af5b0e8e7 [ 42.316951] RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055be67640248 [ 42.317887] RBP: 0000000000000003 R08: 0000000000000000 R09: 1999999999999999 [ 42.318845] R10: 0000000000000883 R11: 0000000000000206 R12: 00007fffe6cdf130 [ 42.319755] R13: 0000000000000000 R14: 0000000000000000 R15: 000055be676401e0 [ 42.320606] Code: c0 74 1c f0 ff 4f 1c 74 02 5d c3 85 f6 74 07 e8 0f d8 ff ff 5d c3 31 f6 e8 c6 fb ff ff 5d c3 48 c7 c6 c8 0f c5 ba e8 58 be 02 00 <0f> 0b 66 0f 1f 44 00 00 66 66 66 66 90 48 85 ff 75 01 c3 55 48 [ 42.323462] RIP: __free_pages+0x38/0x40 RSP: ffffbfefc163be98 [ 42.325735] ---[ end trace 872e008e33f81508 ]--- To solve the bug, we eliminate the dual purpose of balloon.page. Fixes: f220a80f ("VMware balloon: add batching to the vmw_balloon.") Cc: stable@vger.kernel.org Reported-by:
Oleksandr Natalenko <onatalen@redhat.com> Signed-off-by:
Gil Kupfer <gilkup@gmail.com> Signed-off-by:
Nadav Amit <namit@vmware.com> Reviewed-by:
Xavier Deguillard <xdeguillard@vmware.com> Tested-by:
Oleksandr Natalenko <oleksandr@redhat.com> Signed-off-by:
-
Marek Szyprowski authored
commit aa2f80e7 upstream. The best granularity of residue that DMA engine can report is in the BURST units, so the serial driver must use MAXBURST = 1 and DMA_SLAVE_BUSWIDTH_1_BYTE if it relies on exact number of bytes transferred by DMA engine. Fixes: 62c37eed ("serial: samsung: add dma reqest/release functions") Signed-off-by:
Marek Szyprowski <m.szyprowski@samsung.com> Acked-by:
Krzysztof Kozlowski <krzk@kernel.org> Cc: stable <stable@vger.kernel.org> Signed-off-by:
-
Paolo Bonzini authored
commit ce14e868 upstream. Int the next patch the emulator's .read_std and .write_std callbacks will grow another argument, which is not needed in kvm_read_guest_virt and kvm_write_guest_virt_system's callers. Since we have to make separate functions, let's give the currently existing names a nicer interface, too. Fixes: 129a72a0 ("KVM: x86: Introduce segmented_write_std", 2017-01-12) Cc: stable@vger.kernel.org Signed-off-by:
-
Paolo Bonzini authored
commit 79367a65 upstream. Wrap the common invocation of ctxt->ops->read_std and ctxt->ops->write_std, so as to have a smaller patch when the functions grow another argument. Fixes: 129a72a0 ("KVM: x86: Introduce segmented_write_std", 2017-01-12) Cc: stable@vger.kernel.org Signed-off-by:
-
Linus Torvalds authored
commit 0cc3b0ec upstream. We have a MAX_LFS_FILESIZE macro that is meant to be filled in by filesystems (and other IO targets) that know they are 64-bit clean and don't have any 32-bit limits in their IO path. It turns out that our 32-bit value for that limit was bogus. On 32-bit, the VM layer is limited by the page cache to only 32-bit index values, but our logic for that was confusing and actually wrong. We used to define that value to (((loff_t)PAGE_SIZE << (BITS_PER_LONG-1))-1) which is actually odd in several ways: it limits the index to 31 bits, and then it limits files so that they can't have data in that last byte of a page that has the highest 31-bit index (ie page index 0x7fffffff). Neither of those limitations make sense. The index is actually the full 32 bit unsigned value, and we can use that whole full page. So the maximum size of the file would logically be "PAGE_SIZE << BITS_PER_LONG". However, we do wan tto avoid the maximum index, because we have code that iterates over the page indexes, and we don't want that code to overflow. So the maximum size of a file on a 32-bit host should actually be one page less than the full 32-bit index. So the actual limit is ULONG_MAX << PAGE_SHIFT. That means that we will not actually be using the page of that last index (ULONG_MAX), but we can grow a file up to that limit. The wrong value of MAX_LFS_FILESIZE actually caused problems for Doug Nazar, who was still using a 32-bit host, but with a 9.7TB 2 x RAID5 volume. It turns out that our old MAX_LFS_FILESIZE was 8TiB (well, one byte less), but the actual true VM limit is one page less than 16TiB. This was invisible until commit c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()"), which started applying that MAX_LFS_FILESIZE limit to block devices too. NOTE! On 64-bit, the page index isn't a limiter at all, and the limit is actually just the offset type itself (loff_t), which is signed. But for clarity, on 64-bit, just use the maximum signed value, and don't make people have to count the number of 'f' characters in the hex constant. So just use LLONG_MAX for the 64-bit case. That was what the value had been before too, just written out as a hex constant. Fixes: c2a9737f ("vfs,mm: fix a dead loop in truncate_inode_pages_range()") Reported-and-tested-by:
Doug Nazar <nazard@nazar.ca> Cc: Andreas Dilger <adilger@dilger.ca> Cc: Mark Fasheh <mfasheh@versity.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Dave Kleikamp <shaggy@kernel.org> Cc: stable@kernel.org Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org> Cc: Rafael Tinoco <rafael.tinoco@linaro.org> [backported to 4.4.y due to requests of failed LTP tests - gregkh] Signed-off-by:
-
Linus Walleij authored
commit 7d18f0a1 upstream. Sometimes a GPIO is fetched with NULL as parent device, and that is just fine. So under these circumstances, avoid using dev_name() to provide a name for the GPIO line. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Cc: Daniel Rosenberg <drosen@google.com> Signed-off-by:
-
Andy Lutomirski authored
commit 02f39b23 upstream. The crypto code was checking both use_eager_fpu() and defined(X86_FEATURE_EAGER_FPU). The latter was nonsensical, so remove it. This will avoid breakage when we remove X86_FEATURE_EAGER_FPU. Signed-off-by:
Andy Lutomirski <luto@kernel.org> Signed-off-by:
Rik van Riel <riel@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Quentin Casasnovas <quentin.casasnovas@oracle.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: pbonzini@redhat.com Link: http://lkml.kernel.org/r/1475627678-20788-2-git-send-email-riel@redhat.comSigned-off-by:
Ingo Molnar <mingo@kernel.org> Signed-off-by:
-
Kevin Easton authored
commit 4b66af2d upstream. Key extensions (struct sadb_key) include a user-specified number of key bits. The kernel uses that number to determine how much key data to copy out of the message in pfkey_msg2xfrm_state(). The length of the sadb_key message must be verified to be long enough, even in the case of SADB_X_AALG_NULL. Furthermore, the sadb_key_len value must be long enough to include both the key data and the struct sadb_key itself. Introduce a helper function verify_key_len(), and call it from parse_exthdrs() where other exthdr types are similarly checked for correctness. Signed-off-by:
Kevin Easton <kevin@guarana.org> Reported-by: syzbot+5022a34ca5a3d49b84223653fab632dfb7b4cf37@syzkaller.appspotmail.com Signed-off-by:
-
Andy Lutomirski authored
commit 4ecd16ec upstream. Systems without an FPU are generally old and therefore use lazy FPU switching. Unsurprisingly, math emulation in eager FPU mode is a bit buggy. Fix it. There were two bugs involving kernel code trying to use the FPU registers in eager mode even if they didn't exist and one BUG_ON() that was incorrect. Signed-off-by:
-
Andy Lutomirski authored
commit 5ed73f40 upstream. In eager fpu mode, having deactivated FPU without immediately reloading some other context is illegal. Therefore, to recover from FNSAVE, we can't just deactivate the state -- we need to reload it if we're not actively context switching. We had this wrong in fpu__save() and fpu__copy(). Fix both. __kernel_fpu_begin() was fine -- add a comment. This fixes a warning triggerable with nofxsr eagerfpu=on. Signed-off-by:
-
Andy Lutomirski authored
commit ca6938a1 upstream. Since commit: 58122bf1 ("x86/fpu: Default eagerfpu=on on all CPUs") ... in Linux 4.6, eager FPU mode has been the default on all x86 systems, and no one has reported any regressions. This patch removes the ability to enable lazy mode: use_eager_fpu() becomes "return true" and all of the FPU mode selection machinery is removed. Signed-off-by:
-
Borislav Petkov authored
commit 6e686709 upstream. i486 derived cores like Intel Quark support only the very old, legacy x87 FPU (FSAVE/FRSTOR, CPUID bit FXSR is not set), and our FPU code wasn't handling the saving and restoring there properly in the 'eagerfpu' case. So after we made eagerfpu the default for all CPU types: 58122bf1 x86/fpu: Default eagerfpu=on on all CPUs these old FPU designs broke. First, Andy Shevchenko reported a splat: WARNING: CPU: 0 PID: 823 at arch/x86/include/asm/fpu/internal.h:163 fpu__clear+0x8c/0x160 which was us trying to execute FXRSTOR on those machines even though they don't support it. After taking care of that, Bryan O'Donoghue reported that a simple FPU test still failed because we weren't initializing the FPU state properly on those machines. Take care of all that. Reported-and-tested-by:
Bryan O'Donoghue <pure.logic@nexus-software.ie> Reported-by:
Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by:
Borislav Petkov <bp@suse.de> Acked-by:
-
Yu-cheng Yu authored
commit a65050c6 upstream. Leonid Shatz noticed that the SDM interpretation of the following recent commit: 394db20c ("x86/fpu: Disable AVX when eagerfpu is off") ... is incorrect and that the original behavior of the FPU code was correct. Because AVX is not stated in CR0 TS bit description, it was mistakenly believed to be not supported for lazy context switch. This turns out to be false: Intel Software Developer's Manual Vol. 3A, Sec. 2.5 Control Registers: 'TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the x87 FPU/ MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch to be delayed until an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4 instruction is actually executed by the new task.' Intel Software Developer's Manual Vol. 2A, Sec. 2.4 Instruction Exception Specification: 'AVX instructions refer to exceptions by classes that include #NM "Device Not Available" exception for lazy context switch.' So revert the commit. Reported-by:
Leonid Shatz <leonid.shatz@ravellosystems.com> Signed-off-by:
Yu-cheng Yu <yu-cheng.yu@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Borislav Petkov <bp@suse.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ravi V. Shankar <ravi.v.shankar@intel.com> Cc: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Link: http://lkml.kernel.org/r/1457569734-3785-1-git-send-email-yu-cheng.yu@intel.comSigned-off-by:
-
Andy Lutomirski authored
commit f363938c upstream. After fixing FPU option parsing, we now parse the 'no387' boot option too early: no387 clears X86_FEATURE_FPU before it's even probed, so the boot CPU promptly re-enables it. I suspect it gets even more confused on SMP. Fix the probing code to leave X86_FEATURE_FPU off if it's been disabled by setup_clear_cpu_cap(). Signed-off-by:
-
Andy Lutomirski authored
commit 58122bf1 upstream. We have eager and lazy FPU modes, introduced in: 304bceda ("x86, fpu: use non-lazy fpu restore for processors supporting xsave") The result is rather messy. There are two code paths in almost all of the FPU code, and only one of them (the eager case) is tested frequently, since most kernel developers have new enough hardware that we use eagerfpu. It seems that, on any remotely recent hardware, eagerfpu is a win: glibc uses SSE2, so laziness is probably overoptimistic, and, in any case, manipulating TS is far slower that saving and restoring the full state. (Stores to CR0.TS are serializing and are poorly optimized.) To try to shake out any latent issues on old hardware, this changes the default to eager on all CPUs. If no performance or functionality problems show up, a subsequent patch could remove lazy mode entirely. Signed-off-by:
-
yu-cheng yu authored
commit 394db20c upstream. When "eagerfpu=off" is given as a command-line input, the kernel should disable AVX support. The Task Switched bit used for lazy context switching does not support AVX. If AVX is enabled without eagerfpu context switching, one task's AVX state could become corrupted or leak to other tasks. This is a bug and has bad security implications. This only affects systems that have AVX/AVX2/AVX512 and this issue will be found only when one actually uses AVX/AVX2/AVX512 _AND_ does eagerfpu=off. Reference: Intel Software Developer's Manual Vol. 3A Sec. 2.5 Control Registers: TS Task Switched bit (bit 3 of CR0) -- Allows the saving of the x87 FPU/ MMX/SSE/SSE2/SSE3/SSSE3/SSE4 context on a task switch to be delayed until an x87 FPU/MMX/SSE/SSE2/SSE3/SSSE3/SSE4 instruction is actually executed by the new task. Sec. 13.4.1 Using the TS Flag to Control the Saving of the X87 FPU and SSE State When the TS flag is set, the processor monitors the instruction stream for x87 FPU, MMX, SSE instructions. When the processor detects one of these instructions, it raises a device-not-available exeception (#NM) prior to executing the instruction. Signed-off-by:
-
yu-cheng yu authored
commit a5fe93a5 upstream. This issue is a fallout from the command-line parsing move. When "eagerfpu=off" is given as a command-line input, the kernel should disable MPX support. The decision for turning off MPX was made in fpu__init_system_ctx_switch(), which is after the selection of the XSAVE format. This patch fixes it by getting that decision done earlier in fpu__init_system_xstate(). Signed-off-by:
-
Borislav Petkov authored
commit 362f924b upstream. Those are stupid and code should use static_cpu_has_safe() or boot_cpu_has() instead. Kill the least used and unused ones. The remaining ones need more careful inspection before a conversion can happen. On the TODO. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Juergen Gross authored
commit ed29210c upstream. It is used nowhere. Signed-off-by:
Juergen Gross <jgross@suse.com> Link: http://lkml.kernel.org/r/1447761943-770-1-git-send-email-jgross@suse.comSigned-off-by:
-
yu-cheng yu authored
commit 4f81cbaf upstream. The function fpu__init_system() is executed before parse_early_param(). This causes wrong FPU configuration. This patch fixes this issue by parsing boot_command_line in the beginning of fpu__init_system(). With all four patches in this series, each parameter disables features as the following: eagerfpu=off: eagerfpu, avx, avx2, avx512, mpx no387: fpu nofxsr: fxsr, fxsropt, xmm noxsave: xsave, xsaveopt, xsaves, xsavec, avx, avx2, avx512, mpx, xgetbv1 noxsaveopt: xsaveopt noxsaves: xsaves Signed-off-by:
-
- 13 Jun, 2018 5 commits
-
-
Greg Kroah-Hartman authored
-
Eric Dumazet authored
[ Upstream commit 5b5e7a0d ] Before using nla_get_u32(), better make sure the attribute is of the proper size. Code recently was changed, but bug has been there from beginning of git. BUG: KMSAN: uninit-value in rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746 CPU: 1 PID: 14139 Comm: syz-executor6 Not tainted 4.17.0-rc5+ #103 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084 __msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686 rtnetlink_put_metrics+0x553/0x960 net/core/rtnetlink.c:746 fib_dump_info+0xc42/0x2190 net/ipv4/fib_semantics.c:1361 rtmsg_fib+0x65f/0x8c0 net/ipv4/fib_semantics.c:419 fib_table_insert+0x2314/0x2b50 net/ipv4/fib_trie.c:1287 inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x455a09 RSP: 002b:00007faae5fd8c68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007faae5fd96d4 RCX: 0000000000455a09 RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000013 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000005d0 R14: 00000000006fdc20 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_save_stack mm/kmsan/kmsan.c:294 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685 __msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:529 fib_convert_metrics net/ipv4/fib_semantics.c:1056 [inline] fib_create_info+0x2d46/0x9dc0 net/ipv4/fib_semantics.c:1150 fib_table_insert+0x3e4/0x2b50 net/ipv4/fib_trie.c:1146 inet_rtm_newroute+0x210/0x340 net/ipv4/fib_frontend.c:779 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2753 [inline] __kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:988 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: a919525a ("net: Move fib_convert_metrics to metrics file") Fixes: 1da177e4 ("Linux-2.6.12-rc2") Signed-off-by:
syzbot <syzkaller@googlegroups.com> Cc: David Ahern <dsahern@gmail.com> Signed-off-by:
-
Florian Fainelli authored
[ Upstream commit 79fb218d ] On newer PHYs, we need to select the expansion register to write with setting bits [11:8] to 0xf. This was done correctly by bcm7xxx.c prior to being migrated to generic code under bcm-phy-lib.c which unfortunately used the older implementation from the BCM54xx days. Fix this by creating an inline stub: bcm_write_exp_sel() which adds the correct value (MII_BCM54XX_EXP_SEL_ER) and update both the Cygnus PHY and BCM7xxx PHY drivers which require setting these bits. broadcom.c is unchanged because some PHYs even use a different selector method, so let them specify it directly (e.g: SerDes secondary selector). Fixes: a1cba561 ("net: phy: Add Broadcom phy library for common interfaces") Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Eric Dumazet authored
[ Upstream commit 644c7eeb ] It seems that rtnl_group_changelink() can call do_setlink while a prior call to validate_linkmsg(dev = NULL, ...) could not validate IFLA_ADDRESS / IFLA_BROADCAST Make sure do_setlink() calls validate_linkmsg() instead of letting its callers having this responsibility. With help from Dmitry Vyukov, thanks a lot ! BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:199 [inline] BUG: KMSAN: uninit-value in eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline] BUG: KMSAN: uninit-value in eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308 CPU: 1 PID: 8695 Comm: syz-executor3 Not tainted 4.17.0-rc5+ #103 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x185/0x1d0 lib/dump_stack.c:113 kmsan_report+0x149/0x260 mm/kmsan/kmsan.c:1084 __msan_warning_32+0x6e/0xc0 mm/kmsan/kmsan_instr.c:686 is_valid_ether_addr include/linux/etherdevice.h:199 [inline] eth_prepare_mac_addr_change net/ethernet/eth.c:275 [inline] eth_mac_addr+0x203/0x2b0 net/ethernet/eth.c:308 dev_set_mac_address+0x261/0x530 net/core/dev.c:7157 do_setlink+0xbc3/0x5fc0 net/core/rtnetlink.c:2317 rtnl_group_changelink net/core/rtnetlink.c:2824 [inline] rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x455a09 RSP: 002b:00007fc07480ec68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fc07480f6d4 RCX: 0000000000455a09 RDX: 0000000000000000 RSI: 00000000200003c0 RDI: 0000000000000014 RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff R13: 00000000000005d0 R14: 00000000006fdc20 R15: 0000000000000000 Uninit was stored to memory at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_save_stack mm/kmsan/kmsan.c:294 [inline] kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:685 kmsan_memcpy_origins+0x11d/0x170 mm/kmsan/kmsan.c:527 __msan_memcpy+0x109/0x160 mm/kmsan/kmsan_instr.c:478 do_setlink+0xb84/0x5fc0 net/core/rtnetlink.c:2315 rtnl_group_changelink net/core/rtnetlink.c:2824 [inline] rtnl_newlink+0x1fe9/0x37a0 net/core/rtnetlink.c:2976 rtnetlink_rcv_msg+0xa32/0x1560 net/core/rtnetlink.c:4646 netlink_rcv_skb+0x378/0x600 net/netlink/af_netlink.c:2448 rtnetlink_rcv+0x50/0x60 net/core/rtnetlink.c:4664 netlink_unicast_kernel net/netlink/af_netlink.c:1310 [inline] netlink_unicast+0x1678/0x1750 net/netlink/af_netlink.c:1336 netlink_sendmsg+0x104f/0x1350 net/netlink/af_netlink.c:1901 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Uninit was created at: kmsan_save_stack_with_flags mm/kmsan/kmsan.c:279 [inline] kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:189 kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:315 kmsan_slab_alloc+0x10/0x20 mm/kmsan/kmsan.c:322 slab_post_alloc_hook mm/slab.h:446 [inline] slab_alloc_node mm/slub.c:2753 [inline] __kmalloc_node_track_caller+0xb32/0x11b0 mm/slub.c:4395 __kmalloc_reserve net/core/skbuff.c:138 [inline] __alloc_skb+0x2cb/0x9e0 net/core/skbuff.c:206 alloc_skb include/linux/skbuff.h:988 [inline] netlink_alloc_large_skb net/netlink/af_netlink.c:1182 [inline] netlink_sendmsg+0x76e/0x1350 net/netlink/af_netlink.c:1876 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg net/socket.c:639 [inline] ___sys_sendmsg+0xec0/0x1310 net/socket.c:2117 __sys_sendmsg net/socket.c:2155 [inline] __do_sys_sendmsg net/socket.c:2164 [inline] __se_sys_sendmsg net/socket.c:2162 [inline] __x64_sys_sendmsg+0x331/0x460 net/socket.c:2162 do_syscall_64+0x152/0x230 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: e7ed828f ("netlink: support setting devgroup parameters") Signed-off-by:
-
Dan Carpenter authored
[ Upstream commit 25ea6654 ] This code was introduced in 2011 around the same time that we made netdev_features_t a u64 type. These days a u32 is not big enough to hold all the potential features. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Acked-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
