Fixed style of block comments
Found using checkpatch
Signed-off-by: Derek Robson <robsonde@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Use a single string literal as the fmt argument passed to dev_err()
instead of multiple string literals split with an embedded backslash
character.
Signed-off-by: Alexander Kapshuk <alexander.kapshuk@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of new helper fbtft_write_buf_dc.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Make use of new helper fbtft_write_buf_dc.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Factor out setting DC GPIO and writing buffer content to helper
fbtft_write_buf_dc.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The default implementation of write_register keeps DC low for the first
byte only. SH1106 requires DC to be low for all bytes of a multi-byte
command. To deal with this limitation we currently use a separate call
to write_reg for each single command byte what is not really efficient.

Therefore override the default implementation of write_register with an
own one which keeps DC low for all bytes.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There are drivers like fb_sh1106 which allocate a txbuf less than 1 KiB.
In this case the message would include "0 KiB buffer memory" what
doesn't make sense and in general I doubt that there is any benefit in
informing the user about allocation of a very small buffer.

Therefore omit this message part if the buffer has less than 1 KiB.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds /dev/softsynthu, along /dev/softsynth, which emits output in
UTF-8 encoding, thus allowing to support 16bit characters.  Most of the
code is shared, only the read function has to behave differently in
latin1 and in unicode mode.  Since Linux only supports 16bit characters,
we can just hardcode the UTF-8 encoding.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Chris Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This adds 16bit character support to most of the screen reading by
extending characters to u16 throughout the code.

Non-latin1 characters are assumed to be alphabetic type for now.

non-latin1 vt_notifier_call-provided characters are not ignored any
more, and the 16bit character returned by get_char is not truncated any
more. For simplicity, speak_char still only supports latin1 characters.
Its direct mode however does support 16bit characters, so in practice
this will not be a limitation, non-latin1 languages will be handled by
the synthesizer. spelling words does not support direct mode yet, for
simplicity for now it will ignore 16bit characters.

For simplicity again, speakup messages are left in latin1 for now.

Some coding style is fixed along the way.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Okash Khawaja <okash.khawaja@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

This extends the synth buffer slots to 16bit, so as to hold 16bit
unicode characters.

synth_buffer_getc and synth_buffer_peek now return 16bit characters.
Speech synthesizers which do not support characters beyond latin1 can
use the synth_buffer_skip_nonlatin1() helper to skip the non-latin1
characters before getting or peeking. All synthesizers are made to use
it for now.

This makes synth_buffer_add take a 16bit character. For simplicity for
now, synth_printf is left to using latin1 formats and strings.
synth_putwc, synth_putwc_s, synth_putws and synth_putws_s helpers are
however added to put 16bit characters and strings.
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Reviewed-by: Chris Brannon <chris@the-brannons.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

module.h contains a call to moduleparam.h making the call to it
redundant and useless.

@ includesmodule @
@@

 #include <linux/module.h>

@ depends on includesmodule @
@@

- #include <linux/moduleparam.h>
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Variable ip_addr is already declared as pointer to u8. Again explicit type
casting of ip_addr to u8, is not required. Hence this patch removes it
by using the following coccinelle script.

@@
type T;
T *ptr,p;
@@
(
- (T *)(&p)
+ &p
|
- (T *)ptr
+ ptr
|
- (T *)(ptr)
+ ptr
|
- (T)(p)
+ p
)
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removing 6 continue statements from a while loop. The
continue statements are redundant here since control
already returns to the beginning of the loop upon exit
of any of the conditional blocks. Found using Coccinelle.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_gnrl_info_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_network_info_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixes checkpatch warning by renaming pu8Buffer to buffer
and u32Length to length in wilc_scan_complete_received.
Signed-off-by: Tahia Khan <tahia.khan@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added blank line after function and modified comment style.
Signed-off-by: Georgios Emmanouil <geo.emmnl@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed spelling error. 'unkmown' to 'unknown'.
Signed-off-by: Georgios Emmanouil <geo.emmnl@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed comment style to the preferred kernel comment style.
Signed-off-by: Georgios Emmanouil <geo.emmnl@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Modified comment style to preferred kernel comment style.
Signed-off-by: Georgios Emmanouil <geo.emmnl@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed unnecessary 'if' statement and integrated the condition to the
previous 'if' statement.
Signed-off-by: Georgios Emmanouil <geo.emmnl@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Removed unnecessary blank line.
Signed-off-by: Georgios Emmanouil <geo.emmnl@gmail.com>
Reviewed-by: Julian Calaby <julian.calaby@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the checkpatch issue:
Alignment should match open parenthesis
Signed-off-by: Sreya Mittal <sreyamittal5@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comparison to NULL is not necessary because 'if' statement tests if
'synth' is NULL anyway.

Delete comparison in 'if' structure to fix the checkpath.pl issue :
CHECK: Comparison to NULL could be written 'synth'.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Put a part from the headers of some functions in a new line to have less than
80 characters.

Fixed the checkpath.pl issue:
CHECK: line over 80 characters.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed the checkpath.pl issue:
CHECK: Aligment should match open paranthesis.

Added and deleted spaces and tabs to align the code.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Delet the blank line after an open brace '{' to fix the checkpath.pl issue:
CHECK: Blank lines aren't necessary after an open brace '{'.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Added a space after multiple casts to fix the checkpath.pl issue:
CHECK: No space is necessary after a cast.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Some functions like kmalloc/kzalloc return NULL on failure.
When NULL represents failure, !x is commonly used.

This was done using Coccinelle:
@@
expression *e;
identifier l1;
@@

e = \(kmalloc\|kzalloc\|kcalloc\|devm_kzalloc\)(...);
...
- e == NULL
+ !e
Signed-off-by: simran singhal <singhalsimran0@gmail.com>
Acked-by: Julia Lawall <julia.lawall@lip6.fr>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed the following checkpath.pl issue:
CHECK: alignment should match open paranthesis.

Deleted a tab and added spaces to align open paranthesis.
Signed-off-by: Tamara Diaconita <diaconita.tamara@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Fixed indentation to use tabs and aligned all the fields to same level.
Signed-off-by: Tuomo Rinne <tuomo.rinne@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Using __printf allows the compiler to verify formats and arguments.
Use it and fix the single misuse found.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Indentation should always use tabs and never spaces.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Members of nbu2ss_udc structure can change device state, maintain
completion state and control driver. Also provide access to read and
write to register. Hence, exclusive access to nbu2ss_udc is required.
The lock variable of type spinlock_t guarantees the exclusive access
and protects it.

In this patch, comment is added for spinlock_t definition, to fix the
following checkpatch issue:

CHECK: spinlock_t definition without comment
Signed-off-by: Varsha Rao <rvarsha016@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

New variable is added to make the code more readable.
Signed-off-by: Arushi Singhal <arushisinghal19971997@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Declare ieee80211_qos_parameters structure constant it is only passed
as src parameter to the function memcpy. The fields of
def_qos_parameters structure are never modified and hence it can be
declared as const.

Coccinelle Script:

@r1 disable optional_qualifier@
identifier i;
position p;
@@

static struct ieee80211_qos_parameters i@p ={...};

@ok1@
identifier r1.i;
position p;
expression e1,e2;
@@
memcpy(e1,&i@p,e2)

@bad@
position p!={r1.p,ok1.p};
identifier r1.i;
@@
i@p

@depends on !bad disable optional_qualifier@
identifier r1.i;
@@
static
+const
struct ieee80211_qos_parameters i={...};
Signed-off-by: Gargi Sharma <gs051095@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

The `device_ids[]` passed to `MODULE_DEVICE_TABLE()` should be `const`.
When the "ni_atmio" driver is built-in, gcc warns about `device_ids`
being defined but ununsed.  Make it `const`.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

There is no particular reason why comedi has to be built as kernel
modules.  Remove the `depends on m` from the Kconfig file to allow it to
be built-in.
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Change to unsigned to allow removal of negative value check in
init section. Use smaller data type since the max possible
value currently is 48.
Signed-off-by: Cheah Kok Cheong <thrust73@gmail.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Comment contains misspelled work 'Adress'.

Correct spelling: Adress -> Address
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>