- 18 Nov, 2020 1 commit
-
-
Christian Borntraeger authored
Older firmware can return rc=0x107 rrc=0xd for destroy page if the page is already non-secure. This should be handled like a success as already done by newer firmware. Signed-off-by:
Christian Borntraeger <borntraeger@de.ibm.com> Fixes: 1a80b54d ("s390/uv: add destroy page call") Reviewed-by:
David Hildenbrand <david@redhat.com> Acked-by:
Cornelia Huck <cohuck@redhat.com> Reviewed-by:
Janosch Frank <frankja@linux.ibm.com>
-
- 11 Nov, 2020 2 commits
-
-
Collin Walling authored
The diag318 data must be set to 0 by VM-wide reset events triggered by diag308. As such, KVM should not handle resetting this data via the VCPU ioctls. Fixes: 23a60f83 ("s390/kvm: diagnose 0x318 sync and reset") Signed-off-by:
Collin Walling <walling@linux.ibm.com> Reviewed-by:
-
Janosch Frank authored
We can only have protected guest pages after a successful set secure parameters call as only then the UV allows imports and unpacks. By moving the test we can now also check for it in s390_reset_acc() and do an early return if it is 0. Signed-off-by:
-
- 09 Nov, 2020 1 commit
-
-
Paolo Bonzini authored
Even though one iteration is not enough for the dirty log performance test (due to the cost of building page tables, zeroing memory etc.) two is okay and it is the default. Without this patch, "./dirty_log_perf_test" without any further arguments fails. Cc: Ben Gardon <bgardon@google.com> Signed-off-by:Paolo Bonzini <pbonzini@redhat.com>
-
- 08 Nov, 2020 25 commits
-
-
Ben Gardon authored
The dirty log perf test will time verious dirty logging operations (enabling dirty logging, dirtying memory, getting the dirty log, clearing the dirty log, and disabling dirty logging) in order to quantify dirty logging performance. This test can be used to inform future performance improvements to KVM's dirty logging infrastructure. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by:
Ben Gardon <bgardon@google.com> Message-Id: <20201027233733.1484855-6-bgardon@google.com> Signed-off-by:
-
Andrew Jones authored
We also check the input number of vcpus against the maximum supported. Signed-off-by:
Andrew Jones <drjones@redhat.com> Message-Id: <20201104212357.171559-8-drjones@redhat.com> Signed-off-by:
-
Andrew Jones authored
Rename vcpu_memory_bytes to something with "percpu" in it in order to be less ambiguous. Also make it global to simplify things. Signed-off-by:
-
Andrew Jones authored
Signed-off-by:
-
Ben Gardon authored
Wrfract will be used by the dirty logging perf test introduced later in this series to dirty memory sparsely. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by:
-
Ben Gardon authored
Add a helper function to get the current time and return the time since a given start time. Use that function to simplify the timekeeping in the demand paging test. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by:
-
Ben Gardon authored
Rounding the address the guest writes to a host page boundary will only have an effect if the host page size is larger than the guest page size, but in that case the guest write would still go to the same host page. There's no reason to round the address down, so remove the rounding to simplify the demand paging test. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by:
-
Ben Gardon authored
Much of the code in demand_paging_test can be reused by other, similar multi-vCPU-memory-touching-perfromance-tests. Factor that common code out for reuse. No functional change expected. This series was tested by running the following invocations on an Intel Skylake machine: dirty_log_perf_test -b 20m -i 100 -v 64 dirty_log_perf_test -b 20g -i 5 -v 4 dirty_log_perf_test -b 4g -i 5 -v 32 demand_paging_test -b 20m -v 64 demand_paging_test -b 20g -v 4 demand_paging_test -b 4g -v 32 All behaved as expected. Signed-off-by:
-
Peter Xu authored
Remove the clear_dirty_log test, instead merge it into the existing dirty_log_test. It should be cleaner to use this single binary to do both tests, also it's a preparation for the upcoming dirty ring test. The default behavior will run all the modes in sequence. Reviewed-by:
Peter Xu <peterx@redhat.com> Message-Id: <20201001012233.6013-1-peterx@redhat.com> Signed-off-by:
-
Peter Xu authored
We used not to clear the dirty bitmap before because KVM_GET_DIRTY_LOG would overwrite it the next time it copies the dirty log onto it. In the upcoming dirty ring tests we'll start to fetch dirty pages from a ring buffer, so no one is going to clear the dirty bitmap for us. Reviewed-by:
-
Andrew Jones authored
Add support for the SVE registers to get-reg-list and create a new test, get-reg-list-sve, which tests them when running on a machine with SVE support. Signed-off-by:
-
Andrew Jones authored
Check for KVM_GET_REG_LIST regressions. The blessed list was created by running on v4.15 with the --core-reg-fixup option. The following script was also used in order to annotate system registers with their names when possible. When new system registers are added the names can just be added manually using the same grep. while read reg; do if [[ ! $reg =~ ARM64_SYS_REG ]]; then printf "\t$reg\n" continue fi encoding=$(echo "$reg" | sed "s/ARM64_SYS_REG(//;s/),//") if ! name=$(grep "$encoding" ../../../../arch/arm64/include/asm/sysreg.h); then printf "\t$reg\n" continue fi name=$(echo "$name" | sed "s/.*SYS_//;s/[\t ]*sys_reg($encoding)$//") printf "\t$reg\t/* $name */\n" done < <(aarch64/get-reg-list --core-reg-fixup --list) Signed-off-by:
-
Oliver Upton authored
Add a set of tests that ensure the guest cannot access paravirtual msrs and hypercalls that have been disabled in the KVM_CPUID_FEATURES leaf. Expect a #GP in the case of msr accesses and -KVM_ENOSYS from hypercalls. Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
Oliver Upton <oupton@google.com> Reviewed-by:
Peter Shier <pshier@google.com> Reviewed-by:
Aaron Lewis <aaronlewis@google.com> Message-Id: <20201027231044.655110-7-oupton@google.com> Signed-off-by:
-
Aaron Lewis authored
Add the infrastructure needed to enable exception handling in selftests. This allows any of the exception and interrupt vectors to be overridden in the guest. Signed-off-by:
Alexander Graf <graf@amazon.com> Message-Id: <20201012194716.3950330-4-aaronlewis@google.com> Signed-off-by:
-
Aaron Lewis authored
Ensure the out value 'uc' in get_ucall() is properly reporting UCALL_NONE if the call fails. The return value will be correctly reported, however, the out parameter 'uc' will not be. Clear the struct to ensure the correct value is being reported in the out parameter. Signed-off-by:
-
Aaron Lewis authored
Fix the layout of 'struct desc64' to match the layout described in the SDM Vol 3, Chapter 3 "Protected-Mode Memory Management", section 3.4.5 "Segment Descriptors", Figure 3-8 "Segment Descriptor". The test added later in this series relies on this and crashes if this layout is not correct. Signed-off-by:
-
Pankaj Gupta authored
Windows2016 guest tries to enable LBR by setting the corresponding bits in MSR_IA32_DEBUGCTLMSR. KVM does not emulate MSR_IA32_DEBUGCTLMSR and spams the host kernel logs with error messages like: kvm [...]: vcpu1, guest rIP: 0xfffff800a8b687d3 kvm_set_msr_common: MSR_IA32_DEBUGCTLMSR 0x1, nop" This patch fixes this by enabling error logging only with 'report_ignored_msrs=1'. Signed-off-by:
Pankaj Gupta <pankaj.gupta@cloud.ionos.com> Message-Id: <20201105153932.24316-1-pankaj.gupta.linux@gmail.com> Signed-off-by:
-
Oliver Upton authored
Commit 5b9bb0eb ("kvm: x86: encapsulate wrmsr(MSR_KVM_SYSTEM_TIME) emulation in helper fn", 2020-10-21) subtly changed the behavior of guest writes to MSR_KVM_SYSTEM_TIME(_NEW). Restore the previous behavior; update the masterclock any time the guest uses a different msr than before. Fixes: 5b9bb0eb ("kvm: x86: encapsulate wrmsr(MSR_KVM_SYSTEM_TIME) emulation in helper fn", 2020-10-21) Signed-off-by:
-
Oliver Upton authored
Make the paravirtual cpuid enforcement mechanism idempotent to ioctl() ordering by updating pv_cpuid.features whenever userspace requests the capability. Extract this update out of kvm_update_cpuid_runtime() into a new helper function and move its other call site into kvm_vcpu_after_set_cpuid() where it more likely belongs. Fixes: 66570e96 ("kvm: x86: only provide PV features if enabled in guest's CPUID") Signed-off-by:
-
Oliver Upton authored
commit 66570e96 ("kvm: x86: only provide PV features if enabled in guest's CPUID") only protects against disallowed guest writes to KVM paravirtual msrs, leaving msr reads unchecked. Fix this by enforcing KVM_CPUID_FEATURES for msr reads as well. Fixes: 66570e96 ("kvm: x86: only provide PV features if enabled in guest's CPUID") Signed-off-by:
-
Maxim Levitsky authored
Recent introduction of the userspace msr filtering added code that uses negative error codes for cases that result in either #GP delivery to the guest, or handled by the userspace msr filtering. This breaks an assumption that a negative error code returned from the msr emulation code is a semi-fatal error which should be returned to userspace via KVM_RUN ioctl and usually kill the guest. Fix this by reusing the already existing KVM_MSR_RET_INVALID error code, and by adding a new KVM_MSR_RET_FILTERED error code for the userspace filtered msrs. Fixes: 291f35fb2c1d1 ("KVM: x86: report negative values from wrmsr emulation to userspace") Reported-by:Qian Cai <cai@redhat.com> Signed-off-by:
Maxim Levitsky <mlevitsk@redhat.com> Message-Id: <20201101115523.115780-1-mlevitsk@redhat.com> Signed-off-by:
-
Peter Xu authored
Should be squashed into 66570e96. Signed-off-by:
-
Peter Xu authored
It should be an accident when rebase, since we've already have section 8.25 (which is KVM_CAP_S390_DIAG318). Fix the number. Signed-off-by:
-
Li RongQing authored
Fix an off-by-one style bug in pte_list_add() where it failed to account the last full set of SPTEs, i.e. when desc->sptes is full and desc->more is NULL. Merge the two "PTE_LIST_EXT-1" checks as part of the fix to avoid an extra comparison. Signed-off-by:
Li RongQing <lirongqing@baidu.com> Reviewed-by:
Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <1601196297-24104-1-git-send-email-lirongqing@baidu.com> Signed-off-by:
-
Paolo Bonzini authored
Merge tag 'kvmarm-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for v5.10, take #2 - Fix compilation error when PMD and PUD are folded - Fix regresssion of the RAZ behaviour of ID_AA64ZFR0_EL1
-
- 06 Nov, 2020 5 commits
-
-
Andrew Jones authored
The AA64ZFR0_EL1 accessors are just the general accessors with its visibility function open-coded. It also skips the if-else chain in read_id_reg, but there's no reason not to go there. Indeed consolidating ID register accessors and removing lines of code make it worthwhile. Remove the AA64ZFR0_EL1 accessors, replacing them with the general accessors for sanitized ID registers. No functional change intended. Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201105091022.15373-5-drjones@redhat.com
-
Andrew Jones authored
The instruction encodings of ID registers are preallocated. Until an encoding is assigned a purpose the register is RAZ. KVM's general ID register accessor functions already support both paths, RAZ or not. If for each ID register we can determine if it's RAZ or not, then all ID registers can build on the general functions. The register visibility function allows us to check whether a register should be completely hidden or not, extending it to also report when the register should be RAZ or not allows us to use it for ID registers as well. Check for RAZ visibility in the ID register accessor functions, allowing the RAZ case to be handled in a generic way for all system registers. The new REG_RAZ flag will be used in a later patch. This patch has no intended functional change. Signed-off-by:
-
Andrew Jones authored
REG_HIDDEN_GUEST and REG_HIDDEN_USER are always used together. Consolidate them into a single REG_HIDDEN flag. We can always add another flag later if some register needs to expose itself differently to the guest than it does to userspace. No functional change intended. Signed-off-by:
-
Andrew Jones authored
ID registers are RAZ until they've been allocated a purpose, but that doesn't mean they should be removed from the KVM_GET_REG_LIST list. So far we only have one register, SYS_ID_AA64ZFR0_EL1, that is hidden from userspace when its function, SVE, is not present. Expose SYS_ID_AA64ZFR0_EL1 to userspace as RAZ when SVE is not implemented. Removing the userspace visibility checks is enough to reexpose it, as it will already return zero to userspace when SVE is not present. The register already behaves as RAZ for the guest when SVE is not present. Fixes: 73433762 ("KVM: arm64/sve: System register context switch and access support") Reported-by:
张东旭 <xu910121@sina.com> Signed-off-by:
-
Gavin Shan authored
The PUD and PMD are folded into PGD when the following options are enabled. In that case, PUD_SHIFT is equal to PMD_SHIFT and we fail to build with the indicated errors: CONFIG_ARM64_VA_BITS_42=y CONFIG_ARM64_PAGE_SHIFT=16 CONFIG_PGTABLE_LEVELS=3 arch/arm64/kvm/mmu.c: In function ‘user_mem_abort’: arch/arm64/kvm/mmu.c:798:2: error: duplicate case value case PMD_SHIFT: ^~~~ arch/arm64/kvm/mmu.c:791:2: note: previously used here case PUD_SHIFT: ^~~~ This fixes the issue by skipping the check on PUD huge page when PUD and PMD are folded into PGD. Fixes: 2f40c460 ("KVM: arm64: Use fallback mapping sizes for contiguous huge page sizes") Reported-by:Eric Auger <eric.auger@redhat.com> Signed-off-by:
Gavin Shan <gshan@redhat.com> Signed-off-by:
-
- 31 Oct, 2020 4 commits
-
-
Paolo Bonzini authored
Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Andrew Jones authored
Unless we want to test with THP, then we shouldn't require it to be configured by the host kernel. Unfortunately, even advising with MADV_NOHUGEPAGE does require it, so check for THP first in order to avoid madvise failing with EINVAL. Signed-off-by:
-
Vitaly Kuznetsov authored
It was noticed that evmcs_sanitize_exec_ctrls() is not being executed nowadays despite the code checking 'enable_evmcs' static key looking correct. Turns out, static key magic doesn't work in '__init' section (and it is unclear when things changed) but setup_vmcs_config() is called only once per CPU so we don't really need it to. Switch to checking 'enlightened_vmcs' instead, it is supposed to be in sync with 'enable_evmcs'. Opportunistically make evmcs_sanitize_exec_ctrls '__init' and drop unneeded extra newline from it. Reported-by:
Yang Weijiang <weijiang.yang@intel.com> Signed-off-by:
Vitaly Kuznetsov <vkuznets@redhat.com> Message-Id: <20201014143346.2430936-1-vkuznets@redhat.com> Signed-off-by:
-
Jim Mattson authored
Add a regression test for commit 671ddc70 ("KVM: nVMX: Don't leak L1 MMIO regions to L2"). First, check to see that an L2 guest can be launched with a valid APIC-access address that is backed by a page of L1 physical memory. Next, set the APIC-access address to a (valid) L1 physical address that is not backed by memory. KVM can't handle this situation, so resuming L2 should result in a KVM exit for internal error (emulation). Signed-off-by:
Jim Mattson <jmattson@google.com> Reviewed-by:
Ricardo Koller <ricarkol@google.com> Reviewed-by:
-
- 30 Oct, 2020 2 commits
-
-
Takashi Iwai authored
The newly introduced kvm_msr_ignored_check() tries to print error or debug messages via vcpu_*() macros, but those may cause Oops when NULL vcpu is passed for KVM_GET_MSRS ioctl. Fix it by replacing the print calls with kvm_*() macros. (Note that this will leave vcpu argument completely unused in the function, but I didn't touch it to make the fix as small as possible. A clean up may be applied later.) Fixes: 12bc2132 ("KVM: X86: Do the same ignore_msrs check for feature msrs") BugLink: https://bugzilla.suse.com/show_bug.cgi?id=1178280 Cc: <stable@vger.kernel.org> Signed-off-by:
Takashi Iwai <tiwai@suse.de> Message-Id: <20201030151414.20165-1-tiwai@suse.de> Signed-off-by:
-
Paolo Bonzini authored
Even though the compiler is able to replace static const variables with their value, it will warn about them being unused when Linux is built with W=1. Use good old macros instead, this is not C++. Signed-off-by:
-
