- 26 Oct, 2017 5 commits
-
-
Huy Nguyen authored
mlx5_ib_add is called during mlx5_pci_resume after a pci error. Before mlx5_ib_add completes, there are multiple events which trigger function mlx5_ib_event. This cause kernel panic because mlx5_ib_event accesses unitialized resources. The fix is to extend Erez Shitrit's patch <97834eba> ("net/mlx5: Delay events till ib registration ends") to cover the pci resume code path. Trace: mlx5_core 0001:01:00.6: mlx5_pci_resume was called mlx5_core 0001:01:00.6: firmware version: 16.20.1011 mlx5_core 0001:01:00.6: mlx5_attach_interface:164:(pid 779): mlx5_ib_event:2996:(pid 34777): warning: event on port 1 mlx5_ib_event:2996:(pid 34782): warning: event on port 1 Unable to handle kernel paging request for data at address 0x0001c104 Faulting instruction address: 0xd000000008f411fc Oops: Kernel access of bad area, sig: 11 [#1] ... ... Call Trace: [c000000fff77bb70] [d000000008f4119c] mlx5_ib_event+0x64/0x470 [mlx5_ib] (unreliable) [c000000fff77bc60] [d000000008e67130] mlx5_core_event+0xb8/0x210 [mlx5_core] [c000000fff77bd10] [d000000008e4bd00] mlx5_eq_int+0x528/0x860[mlx5_core] Fixes: 97834eba ("net/mlx5: Delay events till ib registration ends") Signed-off-by:
Huy Nguyen <huyn@mellanox.com> Reviewed-by:
Saeed Mahameed <saeedm@mellanox.com> Signed-off-by:
-
Moshe Shemesh authored
spin_lock/unlock of health->wq_lock should be IRQ safe. It was changed to spin_lock_irqsave since adding commit 0179720d ("net/mlx5: Introduce trigger_health_work function") which uses spin_lock from asynchronous event (IRQ) context. Thus, all spin_lock/unlock of health->wq_lock should have been moved to IRQ safe mode. However, one occurrence on new code using this lock missed that change, resulting in possible deadlock: kernel: Possible unsafe locking scenario: kernel: CPU0 kernel: ---- kernel: lock(&(&health->wq_lock)->rlock); kernel: <Interrupt> kernel: lock(&(&health->wq_lock)->rlock); kernel: #012 *** DEADLOCK *** Fixes: 2a0165a0 ("net/mlx5: Cancel delayed recovery work when unloading the driver") Signed-off-by:
Moshe Shemesh <moshe@mellanox.com> Signed-off-by:
-
Julien Gomes authored
If the name argument of dev_get_valid_name() contains "%d", it will try to assign it a unit number in __dev__alloc_name() and return either the unit number (>= 0) or an error code (< 0). Considering positive values as error values prevent tun device creations relying this mechanism, therefor we should only consider negative values as errors here. Signed-off-by:
Julien Gomes <julien@arista.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Pieter Jansen van Vuuren authored
Previously we did not ensure that a netdev is a representative netdev before dereferencing its private data. This can occur when an upper netdev is created on a representative netdev. This patch corrects this by first ensuring that the netdev is a representative netdev before using it. Checking only switchdev_port_same_parent_id is not sufficient to ensure that we can safely use the netdev. Failing to check that the netdev is also a representative netdev would result in incorrect dereferencing. Fixes: 1a1e586f ("nfp: add basic action capabilities to flower offloads") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com> Signed-off-by:
-
Andrei Vagin authored
socket_diag shows information only about sockets from a namespace where a diag socket lives. But if we request information about one unix socket, the kernel don't check that its netns is matched with a diag socket namespace, so any user can get information about any unix socket in a system. This looks like a bug. v2: add a Fixes tag Fixes: 51d7cccf ("net: make sock diag per-namespace") Signed-off-by:
Andrei Vagin <avagin@openvz.org> Signed-off-by:
-
- 25 Oct, 2017 2 commits
-
-
Vivien Didelot authored
In the case of pdata, the dsa_cpu_parse function calls dev_put() before making sure it isn't NULL. Fix this. Fixes: 71e0bbde ("net: dsa: Add support for platform data") Signed-off-by:
Vivien Didelot <vivien.didelot@savoirfairelinux.com> Reviewed-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
-
Tom Herbert authored
Sock lock may be taken in the message timer function which is a problem since timers run in BH. Instead of timers use delayed_work. Reported-by:
Eric Dumazet <eric.dumazet@gmail.com> Fixes: bbb03029 ("strparser: Generalize strparser") Signed-off-by:
Tom Herbert <tom@quantonium.net> Signed-off-by:
-
- 24 Oct, 2017 7 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsecDavid S. Miller authored
Steffen Klassert says: ==================== pull request (net): ipsec 2017-10-24 1) Fix a memleak when we don't find a inner_mode during bundle creation. From David Miller. 2) Fix a xfrm policy dump crash. We may crash on error when dumping policies via netlink. Fix this by initializing the policy walk with the cb->start method. This fix is a serious stable candidate. From Herbert Xu. Please pull or let me know if there are problems. ==================== Signed-off-by: -
Laszlo Toth authored
Commit 9b974202 ("sctp: support ipv6 nonlocal bind") introduced support for the above options as v4 sctp did, so patched sctp_v6_available(). In the v4 implementation it's enough, because sctp_inet_bind_verify() just returns with sctp_v4_available(). However sctp_inet6_bind_verify() has an extra check before that for link-local scope_id, which won't respect the above options. Added the checks before calling ipv6_chk_addr(), but not before the validation of scope_id. before (w/ both options): ./v6test fe80::10 sctp bind failed, errno: 99 (Cannot assign requested address) ./v6test fe80::10 tcp bind success, errno: 0 (Success) after (w/ both options): ./v6test fe80::10 sctp bind success, errno: 0 (Success) Signed-off-by:
Laszlo Toth <laszlth@gmail.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
Antoine Tenart authored
When Tx IRQs are used, txq_bufs_free() can be called from both the Tx path and from NAPI poll(). This led to CPU stalls as if these two tasks (Tx and Poll) are scheduled on two CPUs at the same time, DMA unmapping operations are done on the same txq buffers. This patch adds a check not to call txq_done() from the Tx path if Tx interrupts are used as it does not make sense to do so. Fixes: edc660fa ("net: mvpp2: replace TX coalescing interrupts with hrtimer") Signed-off-by:
Antoine Tenart <antoine.tenart@free-electrons.com> Signed-off-by:
-
Antoine Tenart authored
The TSO header buffers are coming from a per cpu pool and should not be unmapped as they are reused. The PPv2 driver was unmapping all descriptors buffers unconditionally. This patch fixes this by checking the buffers dma addresses before unmapping them, and by not unmapping those who are located in the TSO header pool. Fixes: 186cd4d4 ("net: mvpp2: software tso support") Signed-off-by:
-
Yan Markman authored
TSO headers are managed with txq index and therefore should be aligned with the txq size, not with the aggregated txq size. Fixes: 186cd4d4 ("net: mvpp2: software tso support") Reported-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Yan Markman <ymarkman@marvell.com> Signed-off-by:
-
Aleksander Morgado authored
The Huawei ME906 (12d1:15c1) comes with a standard ECM interface that requires management via AT commands sent over one of the control TTYs (e.g. connected with AT^NDISDUP). Signed-off-by:
Aleksander Morgado <aleksander@aleksander.es> Signed-off-by:
-
Ran Wang authored
This product is named 'TP-LINK USB 3.0 Gigabit Ethernet Network Adapter (Model No.is UE300)'. It uses chip RTL8153 and works with driver drivers/net/usb/r8152.c Signed-off-by:
Ran Wang <ran.wang_1@nxp.com> Signed-off-by:
-
- 23 Oct, 2017 3 commits
-
-
Herbert Xu authored
An independent security researcher, Mohamed Ghannam, has reported this vulnerability to Beyond Security's SecuriTeam Secure Disclosure program. The xfrm_dump_policy_done function expects xfrm_dump_policy to have been called at least once or it will crash. This can be triggered if a dump fails because the target socket's receive buffer is full. This patch fixes it by using the cb->start mechanism to ensure that the initialisation is always done regardless of the buffer situation. Fixes: 12a169e7 ("ipsec: Put dumpers on the dump list") Signed-off-by:
Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by:
Steffen Klassert <steffen.klassert@secunet.com>
-
Eric Dumazet authored
This patch fixes the following lockdep splat in inet_csk_route_req() lockdep_rcu_suspicious inet_csk_route_req tcp_v4_send_synack tcp_rtx_synack inet_rtx_syn_ack tcp_fastopen_synack_time tcp_retransmit_timer tcp_write_timer_handler tcp_write_timer call_timer_fn Thread running inet_csk_route_req() owns a reference on the request socket, so we have the guarantee ireq->ireq_opt wont be changed or freed. lockdep can enforce this invariant for us. Fixes: c92e8c02 ("tcp/dccp: fix ireq->opt races") Signed-off-by:
Eric Dumazet <edumazet@google.com> Signed-off-by:
-
Koichiro Den authored
When retransmission on TSQ handler was introduced in the commit f9616c35 ("tcp: implement TSQ for retransmits"), the retransmitted skbs' timestamps were updated on the actual transmission. In the later commit 385e2070 ("tcp: use tp->tcp_mstamp in output path"), it stops being done so. In the commit, the comment says "We try to refresh tp->tcp_mstamp only when necessary", and at present tcp_tsq_handler and tcp_v4_mtu_reduced applies to this. About the latter, it's okay since it's rare enough. About the former, even though possible retransmissions on the tasklet comes just after the destructor run in NET_RX softirq handling, the time between them could be nonnegligibly large to the extent that tcp_rack_advance or rto rearming be affected if other (remaining) RX, BLOCK and (preceding) TASKLET sofirq handlings are unexpectedly heavy. So in the same way as tcp_write_timer_handler does, doing tcp_mstamp_refresh ensures the accuracy of algorithms relying on it. Fixes: 385e2070 ("tcp: use tp->tcp_mstamp in output path") Signed-off-by:
Koichiro Den <den@klaipeden.com> Reviewed-by:
-
- 22 Oct, 2017 19 commits
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds authored
Pull networking fixes from David Miller: "A little more than usual this time around. Been travelling, so that is part of it. Anyways, here are the highlights: 1) Deal with memcontrol races wrt. listener dismantle, from Eric Dumazet. 2) Handle page allocation failures properly in nfp driver, from Jaku Kicinski. 3) Fix memory leaks in macsec, from Sabrina Dubroca. 4) Fix crashes in pppol2tp_session_ioctl(), from Guillaume Nault. 5) Several fixes in bnxt_en driver, including preventing potential NVRAM parameter corruption from Michael Chan. 6) Fix for KRACK attacks in wireless, from Johannes Berg. 7) rtnetlink event generation fixes from Xin Long. 8) Deadlock in mlxsw driver, from Ido Schimmel. 9) Disallow arithmetic operations on context pointers in bpf, from Jakub Kicinski. 10) Missing sock_owned_by_user() check in sctp_icmp_redirect(), from Xin Long. 11) Only TCP is supported for sockmap, make that explicit with a check, from John Fastabend. 12) Fix IP options state races in DCCP and TCP, from Eric Dumazet. 13) Fix panic in packet_getsockopt(), also from Eric Dumazet. 14) Add missing locked in hv_sock layer, from Dexuan Cui. 15) Various aquantia bug fixes, including several statistics handling cures. From Igor Russkikh et al. 16) Fix arithmetic overflow in devmap code, from John Fastabend. 17) Fix busted socket memory accounting when we get a fault in the tcp zero copy paths. From Willem de Bruijn. 18) Don't leave opt->tot_len uninitialized in ipv6, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (106 commits) stmmac: Don't access tx_q->dirty_tx before netif_tx_lock ipv6: flowlabel: do not leave opt->tot_len with garbage of_mdio: Fix broken PHY IRQ in case of probe deferral textsearch: fix typos in library helpers rxrpc: Don't release call mutex on error pointer net: stmmac: Prevent infinite loop in get_rx_timestamp_status() net: stmmac: Fix stmmac_get_rx_hwtstamp() net: stmmac: Add missing call to dev_kfree_skb() mlxsw: spectrum_router: Configure TIGCR on init mlxsw: reg: Add Tunneling IPinIP General Configuration Register net: ethtool: remove error check for legacy setting transceiver type soreuseport: fix initialization race net: bridge: fix returning of vlan range op errors sock: correct sk_wmem_queued accounting on efault in tcp zerocopy bpf: add test cases to bpf selftests to cover all access tests bpf: fix pattern matches for direct packet access bpf: fix off by one for range markings with L{T, E} patterns bpf: devmap fix arithmetic overflow in bitmap_size calculation net: aquantia: Bad udp rate on default interrupt coalescing net: aquantia: Enable coalescing management via ethtool interface ... -
Bernd Edlinger authored
This is the possible reason for different hard to reproduce problems on my ARMv7-SMP test system. The symptoms are in recent kernels imprecise external aborts, and in older kernels various kinds of network stalls and unexpected page allocation failures. My testing indicates that the trouble started between v4.5 and v4.6 and prevails up to v4.14. Using the dirty_tx before acquiring the spin lock is clearly wrong and was first introduced with v4.6. Fixes: e3ad57c9 ("stmmac: review RX/TX ring management") Signed-off-by:
Bernd Edlinger <bernd.edlinger@hotmail.de> Signed-off-by:
-
Eric Dumazet authored
When syzkaller team brought us a C repro for the crash [1] that had been reported many times in the past, I finally could find the root cause. If FlowLabel info is merged by fl6_merge_options(), we leave part of the opt_space storage provided by udp/raw/l2tp with random value in opt_space.tot_len, unless a control message was provided at sendmsg() time. Then ip6_setup_cork() would use this random value to perform a kzalloc() call. Undefined behavior and crashes. Fix is to properly set tot_len in fl6_merge_options() At the same time, we can also avoid consuming memory and cpu cycles to clear it, if every option is copied via a kmemdup(). This is the change in ip6_setup_cork(). [1] kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 6613 Comm: syz-executor0 Not tainted 4.14.0-rc4+ #127 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 task: ffff8801cb64a100 task.stack: ffff8801cc350000 RIP: 0010:ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: 0018:ffff8801cc357550 EFLAGS: 00010203 RAX: dffffc0000000000 RBX: ffff8801cc357748 RCX: 0000000000000010 RDX: 0000000000000002 RSI: ffffffff842bd1d9 RDI: 0000000000000014 RBP: ffff8801cc357620 R08: ffff8801cb17f380 R09: ffff8801cc357b10 R10: ffff8801cb64a100 R11: 0000000000000000 R12: ffff8801cc357ab0 R13: ffff8801cc357b10 R14: 0000000000000000 R15: ffff8801c3bbf0c0 FS: 00007f9c5c459700(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020324000 CR3: 00000001d1cf2000 CR4: 00000000001406f0 DR0: 0000000020001010 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000600 Call Trace: ip6_make_skb+0x282/0x530 net/ipv6/ip6_output.c:1729 udpv6_sendmsg+0x2769/0x3380 net/ipv6/udp.c:1340 inet_sendmsg+0x11f/0x5e0 net/ipv4/af_inet.c:762 sock_sendmsg_nosec net/socket.c:633 [inline] sock_sendmsg+0xca/0x110 net/socket.c:643 SYSC_sendto+0x358/0x5a0 net/socket.c:1750 SyS_sendto+0x40/0x50 net/socket.c:1718 entry_SYSCALL_64_fastpath+0x1f/0xbe RIP: 0033:0x4520a9 RSP: 002b:00007f9c5c458c08 EFLAGS: 00000216 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 0000000000718000 RCX: 00000000004520a9 RDX: 0000000000000001 RSI: 0000000020fd1000 RDI: 0000000000000016 RBP: 0000000000000086 R08: 0000000020e0afe4 R09: 000000000000001c R10: 0000000000000000 R11: 0000000000000216 R12: 00000000004bb1ee R13: 00000000ffffffff R14: 0000000000000016 R15: 0000000000000029 Code: e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 ea 0f 00 00 48 8d 79 04 48 b8 00 00 00 00 00 fc ff df 45 8b 74 24 04 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 38 d0 7c 08 84 d2 0f 85 RIP: ip6_setup_cork+0x274/0x15c0 net/ipv6/ip6_output.c:1168 RSP: ffff8801cc357550 Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Signed-off-by:
-
Geert Uytterhoeven authored
If an Ethernet PHY is initialized before the interrupt controller it is connected to, a message like the following is printed: irq: no irq domain found for /interrupt-controller@e61c0000 ! However, the actual error is ignored, leading to a non-functional (POLL) PHY interrupt later: Micrel KSZ8041RNLI ee700000.ethernet-ffffffff:01: attached PHY driver [Micrel KSZ8041RNLI] (mii_bus:phy_addr=ee700000.ethernet-ffffffff:01, irq=POLL) Depending on whether the PHY driver will fall back to polling, Ethernet may or may not work. To fix this: 1. Switch of_mdiobus_register_phy() from irq_of_parse_and_map() to of_irq_get(). Unlike the former, the latter returns -EPROBE_DEFER if the interrupt controller is not yet available, so this condition can be detected. Other errors are handled the same as before, i.e. use the passed mdio->irq[addr] as interrupt. 2. Propagate and handle errors from of_mdiobus_register_phy() and of_mdiobus_register_device(). Signed-off-by:Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by:
-
Randy Dunlap authored
Fix spellos (typos) in textsearch library helpers. Signed-off-by:
Randy Dunlap <rdunlap@infradead.org> Signed-off-by:
-
David Howells authored
Don't release call mutex at the end of rxrpc_kernel_begin_call() if the call pointer actually holds an error value. Fixes: 540b1c48 ("rxrpc: Fix deadlock between call creation and sendmsg/recvmsg") Reported-by:
Marc Dionne <marc.dionne@auristor.com> Signed-off-by:
David Howells <dhowells@redhat.com> Signed-off-by:
-
David S. Miller authored
Jose Abreu says: ==================== net: stmmac: Fix HW timestamping Three fixes for HW timestamping feature, all of them for RX side. ==================== Signed-off-by: -
Jose Abreu authored
Prevent infinite loop by correctly setting the loop condition to break when i == 10. Signed-off-by:
Jose Abreu <joabreu@synopsys.com> Cc: David S. Miller <davem@davemloft.net> Cc: Joao Pinto <jpinto@synopsys.com> Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com> Cc: Alexandre Torgue <alexandre.torgue@st.com> Signed-off-by:
-
Jose Abreu authored
When using GMAC4 the valid timestamp is from CTX next desc but we are passing the previous desc to get_rx_timestamp_status() callback. Fix this and while at it rework a little bit the function logic. Signed-off-by:
-
Jose Abreu authored
When RX HW timestamp is enabled and a frame is discarded we are not freeing the skb but instead only setting to NULL the entry. Add a call to dev_kfree_skb_any() so that skb entry is correctly freed. Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
Pull input fixes from Dmitry Torokhov: - joydev now implements a blacklist to avoid creating joystick nodes for accelerometers found in composite devices such as PlaStation controllers - assorted driver fixes * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ims-psu - check if CDC union descriptor is sane Input: joydev - blacklist ds3/ds4/udraw motion sensors Input: allow matching device IDs on property bits Input: factor out and export input_device_id matching code Input: goodix - poll the 'buffer status' bit before reading data Input: axp20x-pek - fix module not auto-loading for axp221 pek Input: tca8418 - enable interrupt after it has been requested Input: stmfts - fix setting ABS_MT_POSITION_* maximum size Input: ti_am335x_tsc - fix incorrect step config for 5 wire touchscreen Input: synaptics - disable kernel tracking on SMBus devices
-
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfsLinus Torvalds authored
Pull vfs fixes from Al Viro: "MS_I_VERSION fixes - Mimi's fix + missing bits picked from Matthew (his patch contained a duplicate of the fs/namespace.c fix as well, but by that point the original fix had already been applied)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: Convert fs/*/* to SB_I_VERSION vfs: fix mounting a filesystem with i_version
-
David S. Miller authored
Jiri Pirko says: ==================== mlxsw: spectrum: Configure TTL of "inherit" for offloaded tunnels Petr says: Currently mlxsw only offloads tunnels that are configured with TTL of "inherit" (which is the default). However, Spectrum defaults to 255 and the driver neglects to change the configuration. Thus the tunnel packets from offloaded tunnels always have TTL of 255, even though tunnels with explicit TTL of 255 are never actually offloaded. To fix this, introduce support for TIGCR, the register that keeps the related bits of global tunnel configuration, and use it on first offload to properly configure inheritance of TTL of tunnel packets from overlay packets. ==================== Signed-off-by: -
Petr Machata authored
Spectrum tunnels do not default to ttl of "inherit" like the Linux ones do. Configure TIGCR on router init so that the TTL of tunnel packets is copied from the overlay packets. Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by:
Petr Machata <petrm@mellanox.com> Reviewed-by:
Ido Schimmel <idosch@mellanox.com> Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Petr Machata authored
The TIGCR register is used for setting up the IPinIP Tunnel configuration. Fixes: ee954d1a ("mlxsw: spectrum_router: Support GRE tunnels") Signed-off-by:
-
Niklas Söderlund authored
Commit 9cab88726929605 ("net: ethtool: Add back transceiver type") restores the transceiver type to struct ethtool_link_settings and convert_link_ksettings_to_legacy_settings() but forgets to remove the error check for the same in convert_legacy_settings_to_link_ksettings(). This prevents older versions of ethtool to change link settings. # ethtool --version ethtool version 3.16 # ethtool -s eth0 autoneg on speed 100 duplex full Cannot set new settings: Invalid argument not setting speed not setting duplex not setting autoneg While newer versions of ethtool works. # ethtool --version ethtool version 4.10 # ethtool -s eth0 autoneg on speed 100 duplex full [ 57.703268] sh-eth ee700000.ethernet eth0: Link is Down [ 59.618227] sh-eth ee700000.ethernet eth0: Link is Up - 100Mbps/Full - flow control rx/tx Fixes: 19cab887 ("net: ethtool: Add back transceiver type") Signed-off-by:Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reported-by:
Renjith R V <renjith.rv@quest-global.com> Tested-by:
-
Craig Gallek authored
Syzkaller stumbled upon a way to trigger WARNING: CPU: 1 PID: 13881 at net/core/sock_reuseport.c:41 reuseport_alloc+0x306/0x3b0 net/core/sock_reuseport.c:39 There are two initialization paths for the sock_reuseport structure in a socket: Through the udp/tcp bind paths of SO_REUSEPORT sockets or through SO_ATTACH_REUSEPORT_[CE]BPF before bind. The existing implementation assumedthat the socket lock protected both of these paths when it actually only protects the SO_ATTACH_REUSEPORT path. Syzkaller triggered this double allocation by running these paths concurrently. This patch moves the check for double allocation into the reuseport_alloc function which is protected by a global spin lock. Fixes: e32ea7e7 ("soreuseport: fast reuseport UDP socket selection") Fixes: c125e80b ("soreuseport: fast reuseport TCP socket selection") Signed-off-by:
Craig Gallek <kraig@google.com> Signed-off-by:
-
Nikolay Aleksandrov authored
When vlan tunnels were introduced, vlan range errors got silently dropped and instead 0 was returned always. Restore the previous behaviour and return errors to user-space. Fixes: efa5356b ("bridge: per vlan dst_metadata netlink support") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Willem de Bruijn authored
Syzkaller hits WARN_ON(sk->sk_wmem_queued) in sk_stream_kill_queues after triggering an EFAULT in __zerocopy_sg_from_iter. On this error, skb_zerocopy_stream_iter resets the skb to its state before the operation with __pskb_trim. It cannot kfree_skb like datagram callers, as the skb may have data from a previous send call. __pskb_trim calls skb_condense for unowned skbs, which adjusts their truesize. These tcp skbuffs are owned and their truesize must add up to sk_wmem_queued. But they match because their skb->sk is NULL until tcp_transmit_skb. Temporarily set skb->sk when calling __pskb_trim to signal that the skbuffs are owned and avoid the skb_condense path. Fixes: 52267790 ("sock: add MSG_ZEROCOPY") Signed-off-by:
Willem de Bruijn <willemb@google.com> Reviewed-by:
-
- 21 Oct, 2017 4 commits
-
-
David S. Miller authored
Daniel Borkmann says: ==================== Two BPF fixes for range marking The set contains two fixes for direct packet access range markings and test cases for all direct packet access patterns that the verifier matches on. They are targeted for net tree, note that once net gets merged into net-next, there will be a minor merge conflict due to signature change of the function find_good_pkt_pointers() as well as data_meta patterns present in net-next tree. You can just add bool false to the data_meta patterns and I will follow-up with properly converting the patterns for data_meta in a similar way. ==================== Signed-off-by: -
Daniel Borkmann authored
Lets add test cases to cover really all possible direct packet access tests for good/bad access cases so we keep tracking them. Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net> Acked-by:
Alexei Starovoitov <ast@kernel.org> Acked-by:
John Fastabend <john.fastabend@gmail.com> Signed-off-by:
-
Daniel Borkmann authored
Alexander had a test program with direct packet access, where the access test was in the form of data + X > data_end. In an unrelated change to the program LLVM decided to swap the branches and emitted code for the test in form of data + X <= data_end. We hadn't seen these being generated previously, thus verifier would reject the program. Therefore, fix up the verifier to detect all test cases, so we don't run into such issues in the future. Fixes: b4e432f1 ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier") Reported-by:
Alexander Alemayhu <alexander@alemayhu.com> Signed-off-by:
-
Daniel Borkmann authored
During review I noticed that the current logic for direct packet access marking in check_cond_jmp_op() has an off by one for the upper right range border when marking in find_good_pkt_pointers() with BPF_JLT and BPF_JLE. It's not really harmful given access up to pkt_end is always safe, but we should nevertheless correct the range marking before it becomes ABI. If pkt_data' denotes a pkt_data derived pointer (pkt_data + X), then for pkt_data' < pkt_end in the true branch as well as for pkt_end <= pkt_data' in the false branch we mark the range with X although it should really be X - 1 in these cases. For example, X could be pkt_end - pkt_data, then when testing for pkt_data' < pkt_end the verifier simulation cannot deduce that a byte load of pkt_data' - 1 would succeed in this branch. Fixes: b4e432f1 ("bpf: enable BPF_J{LT, LE, SLT, SLE} opcodes in verifier") Signed-off-by:
-
