- 15 Apr, 2024 9 commits
-
-
John Fraker authored
gve has supported software timestamp generation since its inception, but has not advertised that support via ethtool. This patch correctly advertises that support. Signed-off-by:
John Fraker <jfraker@google.com> Reviewed-by:
Harshitha Ramamurthy <hramamurthy@google.com> Reviewed-by:
Willem de Bruijn <willemb@google.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Jason Xing authored
Normally, we don't face these two exceptions very often meanwhile we have some chance to meet the condition where the current cpu id is the same as skb->alloc_cpu. One simple test that can help us see the frequency of this statement 'cpu == raw_smp_processor_id()': 1. running iperf -s and iperf -c [ip] -P [MAX CPU] 2. using BPF to capture skb_attempt_defer_free() I can see around 4% chance that happens to satisfy the statement. So moving this statement at the beginning can save some cycles in most cases. Signed-off-by:
Jason Xing <kernelxing@tencent.com> Reviewed-by:
Alexander Lobakin <aleksander.lobakin@intel.com> Signed-off-by:
-
David S. Miller authored
Asbjørn Sloth Tønnesen says: ==================== flower: validate control flags I have reviewed the flower control flags code. In all, but one (sfc), the flags field wasn't checked properly for unsupported flags. In this series I have only included a single example user for each helper function. Once the helpers are in, I will submit patches for all other drivers implementing flower. After which there will be: - 6 drivers using flow_rule_is_supp_control_flags() - 8 drivers using flow_rule_has_control_flags() - 11 drivers using flow_rule_match_has_control_flags() --- Changelog: v3: - Added Reviewed-by from Louis Peens (first two patches) - Properly fixed kernel-doc format v2: https://lore.kernel.org/netdev/20240410093235.5334-1-ast@fiberby.net/ - Squashed the 3 helper functions to one commmit (requested by Baowen Zheng) - Renamed helper functions to avoid double negatives (suggested by Louis Peens) - Reverse booleans in some functions and callsites to align with new names - Fix autodoc format v1: https://lore.kernel.org/netdev/20240408130927.78594-1-ast@fiberby.net/ ==================== Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Add check for unsupported control flags. Only compile-tested, no access to HW. Signed-off-by:
Asbjørn Sloth Tønnesen <ast@fiberby.net> Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Add check for unsupported control flags. Only compile-tested, no access to HW. Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
Use flow_rule_is_supp_control_flags() Check the mask, not the key, for unsupported control flags. Only compile-tested, no access to HW Signed-off-by:
Louis Peens <louis.peens@corigine.com> Signed-off-by:
-
Asbjørn Sloth Tønnesen authored
These helpers aim to help drivers, with checking for the presence of unsupported control flags. For drivers supporting at least one control flag: flow_rule_is_supp_control_flags() For drivers using flow_rule_match_control(), but not using flags: flow_rule_has_control_flags() For drivers not using flow_rule_match_control(): flow_rule_match_has_control_flags() While primarily aimed at FLOW_DISSECTOR_KEY_CONTROL and flow_rule_match_control(), then the first two can also be used with FLOW_DISSECTOR_KEY_ENC_CONTROL and flow_rule_match_enc_control(). These helpers mirrors the existing check done in sfc: drivers/net/ethernet/sfc/tc.c +276 Only compile-tested. Signed-off-by:
-
Jakub Kicinski authored
We lock and unlock rtnl in init/exit for convenience, but it started causing problems if the exit is handled by a different thread. To avoid having to futz with disabling locking assertions move the locking into the test cases. We don't use ASSERTs so it should be safe. ============= dev-addr-list-test (6 subtests) ============== [PASSED] dev_addr_test_basic [PASSED] dev_addr_test_sync_one [PASSED] dev_addr_test_add_del [PASSED] dev_addr_test_del_main [PASSED] dev_addr_test_add_set [PASSED] dev_addr_test_add_excl =============== [PASSED] dev-addr-list-test ================ Link: https://lore.kernel.org/all/20240403131936.787234-7-linux@roeck-us.netSigned-off-by:
Jakub Kicinski <kuba@kernel.org> Signed-off-by:
-
Wander Lairson Costa authored
trace_drop_common() is called with preemption disabled, and it acquires a spin_lock. This is problematic for RT kernels because spin_locks are sleeping locks in this configuration, which causes the following splat: BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:48 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 449, name: rcuc/47 preempt_count: 1, expected: 0 RCU nest depth: 2, expected: 2 5 locks held by rcuc/47/449: #0: ff1100086ec30a60 ((softirq_ctrl.lock)){+.+.}-{2:2}, at: __local_bh_disable_ip+0x105/0x210 #1: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: rt_spin_lock+0xbf/0x130 #2: ffffffffb394a280 (rcu_read_lock){....}-{1:2}, at: __local_bh_disable_ip+0x11c/0x210 #3: ffffffffb394a160 (rcu_callback){....}-{0:0}, at: rcu_do_batch+0x360/0xc70 #4: ff1100086ee07520 (&data->lock){+.+.}-{2:2}, at: trace_drop_common.constprop.0+0xb5/0x290 irq event stamp: 139909 hardirqs last enabled at (139908): [<ffffffffb1df2b33>] _raw_spin_unlock_irqrestore+0x63/0x80 hardirqs last disabled at (139909): [<ffffffffb19bd03d>] trace_drop_common.constprop.0+0x26d/0x290 softirqs last enabled at (139892): [<ffffffffb07a1083>] __local_bh_enable_ip+0x103/0x170 softirqs last disabled at (139898): [<ffffffffb0909b33>] rcu_cpu_kthread+0x93/0x1f0 Preemption disabled at: [<ffffffffb1de786b>] rt_mutex_slowunlock+0xab/0x2e0 CPU: 47 PID: 449 Comm: rcuc/47 Not tainted 6.9.0-rc2-rt1+ #7 Hardware name: Dell Inc. PowerEdge R650/0Y2G81, BIOS 1.6.5 04/15/2022 Call Trace: <TASK> dump_stack_lvl+0x8c/0xd0 dump_stack+0x14/0x20 __might_resched+0x21e/0x2f0 rt_spin_lock+0x5e/0x130 ? trace_drop_common.constprop.0+0xb5/0x290 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_drop_common.constprop.0+0xb5/0x290 ? preempt_count_sub+0x1c/0xd0 ? _raw_spin_unlock_irqrestore+0x4a/0x80 ? __pfx_trace_drop_common.constprop.0+0x10/0x10 ? rt_mutex_slowunlock+0x26a/0x2e0 ? skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_rt_mutex_slowunlock+0x10/0x10 ? skb_queue_purge_reason.part.0+0x1bf/0x230 trace_kfree_skb_hit+0x15/0x20 trace_kfree_skb+0xe9/0x150 kfree_skb_reason+0x7b/0x110 skb_queue_purge_reason.part.0+0x1bf/0x230 ? __pfx_skb_queue_purge_reason.part.0+0x10/0x10 ? mark_lock.part.0+0x8a/0x520 ... trace_drop_common() also disables interrupts, but this is a minor issue because we could easily replace it with a local_lock. Replace the spin_lock with raw_spin_lock to avoid sleeping in atomic context. Signed-off-by:Wander Lairson Costa <wander@redhat.com> Reported-by:
Hu Chunyu <chuhu@redhat.com> Signed-off-by:
-
- 13 Apr, 2024 31 commits
-
-
Eric Dumazet authored
- fib rules are already RCU protected, RTNL is not needed to get them. - Fix return value at the end of a dump, so that NLMSG_DONE can be appended to current skb, saving one recvmsg() system call. Signed-off-by:
Eric Dumazet <edumazet@google.com> Reviewed-by:
David Ahern <dsahern@kernel.org> Link: https://lore.kernel.org/r/20240411133340.1332796-1-edumazet@google.comSigned-off-by:
-
Colin Ian King authored
Variable err is being assigned a zero value and it is never read afterwards in either the break path or continue path, the assignment is redundant and can be removed. With it removed, the if statement can also be simplified. Cleans up clang scan warning: net/tipc/socket.c:3570:5: warning: Value stored to 'err' is never read [deadcode.DeadStores] Signed-off-by:
Colin Ian King <colin.i.king@gmail.com> Link: https://lore.kernel.org/r/20240411091704.306752-1-colin.i.king@gmail.comSigned-off-by:
-
Eric Dumazet authored
When TCP_TW_SYN is processed, we perform a lookup to find a listener and jump back in tcp_v6_rcv() and tcp_v4_rcv() Paolo suggested that we do not have to check if the found socket is a TIME_WAIT or NEW_SYN_RECV one. Suggested-by:
Paolo Abeni <pabeni@redhat.com> Link: https://lore.kernel.org/netdev/68085c8a84538cacaac991415e4ccc72f45e76c2.camel@redhat.com/Signed-off-by:
-
Jakub Kicinski authored
Jijie Shao says: ==================== Support some features for the HNS3 ethernet driver Currently, the hns3 driver does not have the trace of the command queue. As a result, it is difficult to locate the communication between the driver and firmware. Therefore, the trace function of the command queue is added in this patch set to facilitate the locating of communication problems between the driver and firmware. If a RAS occurs, the driver will automatically reset to attempt to recover the RAS. Therefore, to locate the cause of the RAS, it is necessary to save the values of some RAS-related registers before the reset. So we added a patch in this patch set to print these information. ==================== Link: https://lore.kernel.org/r/20240410125354.2177067-1-shaojijie@huawei.comSigned-off-by:
-
Hao Chen authored
Add support to query scc version by devlink info for device V3. Signed-off-by:
Hao Chen <chenhao418@huawei.com> Signed-off-by:
Jijie Shao <shaojijie@huawei.com> Link: https://lore.kernel.org/r/20240410125354.2177067-5-shaojijie@huawei.comSigned-off-by:
-
Peiyang Wang authored
When the driver received an interrupte for hardware error, it will try to restore by resetting. But the hardware registers will also be reset at this case, which make it hard to analysis why the hardware error occurs. This patch dumps these registers before resetting to help analyze the hardware error occurs. Signed-off-by:
Peiyang Wang <wangpeiyang1@huawei.com> Signed-off-by:
Simon Horman <horms@kernel.org> Link: https://lore.kernel.org/r/20240410125354.2177067-4-shaojijie@huawei.comSigned-off-by:
-
Jijie Shao authored
some constants are defined in hclge_debugfs.h, but only used in hclge_debugfs.c. so move them from hclge_debugfs.h to hclge_debugfs.c. Signed-off-by:
-
Hao Lan authored
Add support to dump command queue trace for hns3. Signed-off-by:
Hao Lan <lanhao@huawei.com> Signed-off-by:
-
Lin Ma authored
Revert "NFC: fix attrs checks in netlink interface" This reverts commit 18917d51. Our checks found weird attrs present check in function nfc_genl_dep_link_down() and nfc_genl_llc_get_params(), which are introduced by commit 18917d51 ("NFC: fix attrs checks in netlink interface"). According to its message, it should add checks for functions nfc_genl_deactivate_target() and nfc_genl_fw_download(). However, it didn't do that. In fact, the expected checks are added by (1) commit 385097a3 ("nfc: Ensure presence of required attributes in the deactivate_target handler") and (2) commit 280e3ebd ("nfc: Ensure presence of NFC_ATTR_FIRMWARE_NAME attribute in nfc_genl_fw_download()"). Perhaps something went wrong. Anyway, the attr NFC_ATTR_TARGET_INDEX is never accessed in callback nfc_genl_dep_link_down() and same for NFC_ATTR_FIRMWARE_NAME and nfc_genl_llc_get_params(). Thus, remove those checks. Signed-off-by:
Lin Ma <linma@zju.edu.cn> Link: https://lore.kernel.org/r/20240410034846.167421-1-linma@zju.edu.cnSigned-off-by:
-
Jakub Kicinski authored
Uwe Kleine-König says: ==================== ptp: Convert to platform remove callback returning void this series converts all platform drivers below drivers/ptp/ to not use struct platform_device::remove() any more. See commit 5c5a7680 ("platform: Provide a remove callback that returns no value") for an extended explanation and the eventual goal. All conversations are trivial, because the driver's .remove() callbacks returned zero unconditionally. ==================== Link: https://lore.kernel.org/r/cover.1712734365.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Acked-by:
Richard Cochran <richardcochran@gmail.com> Link: https://lore.kernel.org/r/477c6995046eee729447d4f88bf042c7577fe100.1712734365.git.u.kleine-koenig@pengutronix.deSigned-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Uwe Kleine-König authored
The .remove() callback for a platform driver returns an int which makes many driver authors wrongly assume it's possible to do error handling by returning an error code. However the value returned is ignored (apart from emitting a warning) and this typically results in resource leaks. To improve here there is a quest to make the remove callback return void. In the first step of this quest all drivers are converted to .remove_new(), which already returns void. Eventually after all drivers are converted, .remove_new() will be renamed to .remove(). Trivially convert this driver from always returning zero in the remove callback to the void returning variant. Signed-off-by:
-
Jakub Kicinski authored
Florian Westphal says: ==================== selftests: move netfilter tests to net First patch in this series moves selftests/netfilter/ to selftests/net/netfilter/. Passing this via net-next rather than nf-next for this reason. Main motivation is that a lot of these scripts only work on my old development VM, I hope that placing this in net/ will get these tests to get run in more regular intervals (and tests get more robust). Changes are: - make use of existing 'setup_ns' and 'busywait' helpers - fix shellcheck warnings - add more SKIP checks to avoid failures - get rid of netcat in favor of socat, too many test failures due to 'wrong' netcat flavor - do not assume rp_filter sysctl is off I have more patches that fix up the remaining test scripts, but the series was too large to send them at once (34 patches). After all scripts are fixed up, tests pass on both my Debian and Fedora test machines. MAINTAINERS is updated to reflect that future updates should be handled via netfilter-devel@. ==================== Link: https://lore.kernel.org/r/20240411233624.8129-1-fw@strlen.deSigned-off-by:
-
Florian Westphal authored
Use busywait helper to wait until socat listener is up to avoid "sleep" calls. This reduces script execution time slighty (12s to 7s). Signed-off-by:
Florian Westphal <fw@strlen.de> Link: https://lore.kernel.org/r/20240411233624.8129-16-fw@strlen.deSigned-off-by:
-
Florian Westphal authored
Use socat, the different nc implementations have too much variance wrt. supported options. Avoid sleeping until listener is up, use busywait helper for this, this also greatly reduces test duration. Signed-off-by:
-
Florian Westphal authored
Also lower ping interval, wait times (helpers get called several times) and set nodad for ipv6 addresses: 20s down to 4s. Signed-off-by:
-
Florian Westphal authored
prefer socat over nc, nc has too many incompatible versions around. Signed-off-by:
-
Florian Westphal authored
While at it, use checktool helper. Signed-off-by:
-
Florian Westphal authored
The setup_ns helper makes the netns names random, so replace nsX with $nsX everywhere. Replace nc with socat, otherwise script fails on my system due to incompatible nc versions ("nc: cannot use -p and -l"). Signed-off-by: -
Florian Westphal authored
... so it doesn't have to be repeated everywhere. Signed-off-by:
-
Florian Westphal authored
Signed-off-by:
-
Florian Westphal authored
swap test for "ip" with "conntrack", former is already accounted for via setup_ns helper. Also switch to bash. Signed-off-by:
-
Florian Westphal authored
While at it, address warnings generated by shellcheck and fix following minor issues: - some distros place netem in 'extra' modules package, so add a skip check for netem-attach failure. - tc prints a warning for the 100mbit class: "Warning: sch_htb: quantum of class 10001 is big. Consider r2q change." Silence this by increasing the divisor. Signed-off-by:
-
Florian Westphal authored
Replace nc with socat. Too many different implementations of nc are around with incompatible options ("nc: cannot use -p and -l"). Signed-off-by: -
Florian Westphal authored
Only relevant change is that netns names have random suffix names, i.e. its safe to run this in parallel with other tests. Signed-off-by:
-
Florian Westphal authored
Also, fix two issues reported by Pablo Neira: 1. Must modprobe br_netfilter in case its not loaded, else sysctl cannot be set. 2. ping for netns4 fails if rp_filter is enabled in bridge netns, so set all and default to 0. Signed-off-by:
-
Florian Westphal authored
Doing so gets us dynamically generated netns names. Also: * do not assume rp_filter is disabled, if its on script failed * reduce timeout (-W) for "expected to fail" ping commands * don't print PASS line for basic sanity ping * shellcheck cleanups Signed-off-by:
-
Florian Westphal authored
.. so this can start re-using existing lib.sh infra in next patches. Several of these scripts will not work, e.g. because they assume rp_filter is disabled, or reliance on a particular version/flavor of "netcat" tool. Add config settings for them. nft_trans_stress.sh script is removed, it also exists in the nftables userspace selftests. I do not see a reason to keep two versions in different repositories/projects. The settings file is removed for now: It was used to increase the timeout to avoid slow scripts from getting zapped by the 45s timeout, but some of the slow scripts can be sped up. Re-add it later for scripts that cannot be sped up easily. Update MAINTAINERS to reflect that future updates to netfilter scripts should go through netfilter-devel@. Signed-off-by:
-
