Pull "Broadcom Device Tree changes for 4.1 #1" from Florian Fainelli:

This pull request contains the following Broadcom SoCs Device Tree changes:

- Jonathan adds support for the Broadcom Cygnus BCM958305K board

- Rafal adds support for Netgear R8000 and fixes the default for power LEDs
  on Netgear R6250

* tag 'arm-soc/for-4.1/devicetree' of http://github.com/broadcom/stblinux:
  ARM: BCM5301X: Fix default state of power LEDs on Netgear R6250
  ARM: BCM5301X: Add DT for Netgear R8000
  ARM: dts: Enable Broadcom Cygnus BCM958305K

Pull "First batch of DT changes for 4.1" into next/dt:

- at91sam9x5 & EK board: ISI and camera sensors
- at91sam9n12 & EK board: USB gadget nodes
- sama5d3: typos, gpio-keys on Xplained board
- sama5d4: i2c, leds, audio, ISI, crypto, pwm missing nodes
- new sama5d4 xplained board

* tag 'at91-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/nferre/linux-at91: (31 commits)
  ARM: at91/dt: sama5d4: add ISI dt support
  ARM: at91/dt: sama5d4: add pwm0 device node
  ARM: at91/dt: sama5d4: add aes, sha and tdes nodes
  ARM: at91: dt: sama5d4ek: enable audio
  ARM: at91: dt: sama5d4ek: add and enable wm8904
  ARM: at91: dt: sama5d4ek: enable ssc0
  ARM: at91: dt: sama5d4: add ssc nodes
  ARM: at91/dt: sama5d4 xplained: add i2c0
  ARM: at91/dt: sama5d4: add dts for sama5d4 xplained board
  ARM: at91/dt: sama5d4: add #{address, size}_cells properties for macb0
  ARM: at91/dt: sama5d4ek: add leds in DT node
  ARM: at91/dt: add i2c1 declaration to sama5d4
  ARM: at91/dt: gpio-keys: address-cells and size-cells properties are not needed
  ARM: at91/dt: at91-sama5d3_xplained: add gpio-key pinctrl property
  ARM: at91/dt/trivial: correct file headers for SAMA5D3 SoC peripherals
  ARM: at91/dt: at91sam9n12ek: enable udp
  ARM: at91/dt: at91sam9n12: add udp device node
  ARM: at91: at91sam9g25ek/dts: enable ISI and ov2640
  ARM: at91: at91sam9x5ek/dts: add ov2640 support
  ARM: at91: at91sam9x5/dts: add ISI dt support, include isi node, pinctrls
  ...

We want green LED to be enabled by default.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Reported-by: Ian Kent <raven@themaw.net>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

Signed-off-by: Daniel Tang <dt.tangr@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Pull "meson DTS changes" from Carlo Caione:

- New DTS for MINIX NEO-X8
- Add DTS support for SPIFC, Ethernet controller and pinctrl

* tag 'for-v4.0-rc/meson-dts' of https://github.com/carlocaione/linux-meson:
  ARM: dts: meson: add DTS file for MINIX NEO-X8
  ARM: dts: meson8: add pinctrl node
  ARM: dts: meson: enable Ethernet controller
  ARM: dts: meson: add node for SPIFC

Merge tag 'renesas-dt-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt

Pull "Renesas ARM Based SoC DT Updates for v4.1" from Simon Horman:

* Increase hardware coverage of DT for various SoCs
* Add PFC information for emev2 SoC
* Remap entire APMU region for r8a7791 and r8a7790 SoCs
* Declare the full 512 MiB of RAM for kzm9g board
* Add selectable sources to DIV6 clocks to sh73a0 SoC
* Add missing INTCA0 clock for irqpin module on sh73a0 SoC
* Set control-parent for all irqpin node on sh73a0 SoC

* tag 'renesas-dt-for-v4.1' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (32 commits)
  ARM: shmobile: r8a7794: add SDHI DT support
  ARM: shmobile: r8a7790: add ADSP clocks
  ARM: shmobile: r8a7791: add ADSP clocks
  ARM: shmobile: henninger: add CAN0 DT support
  ARM: shmobile: r8a7791: add CAN DT support
  ARM: shmobile: r8a7791: add CAN clocks
  ARM: shmobile: r8a7790: add CAN DT support
  ARM: shmobile: r8a7790: add CAN clocks
  ARM: shmobile: emev2-kzm9d dts: Add PFC information for uart1
  ARM: shmobile: emev2 dtsi: Add PFC information
  ARM: shmobile: r8a7791: smp: remap whole apmu region
  ARM: shmobile: r8a7790: smp: remap whole apmu region
  ARM: shmobile: koelsch: Add DU HDMI output support
  ARM: shmobile: r8a7791: Correct SDHI clock labels and output-names
  ARM: shmobile: r8a7794: Correct SDHI clock base address, labels and output-names
  ARM: shmobile: r8a7794: alt: Enable ethernet controller
  ARM: shmobile: r8a7794: Add ethernet controller to device tree
  ARM: shmobile: r8a7794: Add IPMMU DT nodes
  ARM: shmobile: r8a7791: Add IPMMU DT nodes
  ARM: shmobile: r8a7790: Add IPMMU DT nodes
  ...

Add ISI dt node and pinctrl settings in sama5d4.dtsi.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
[nicolas.ferre@atmel.com: sort nodes in order. remove useless comments]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Leilei Zhao <leilei.zhao@atmel.com>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Enable audio support for sama5d4ek board.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add wm8904 codec node and enable it.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Enable SSC0 node, which will be used for audio.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add SSC 0 and 1 nodes.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add i2c0 aka twi0 on sama5d4 xplained board.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add at91 sama5d4 xplained board support.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

macb0 DT node can have phy child nodes, so add the #{address,
size}_cells for macb0 node.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add the leds DT node in the dts file.
In the leds, d10 is set as heartbeat led.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add alias, node declaration and pinctrl for i2c1 (aka: twi1).
Signed-off-by: Philip Attfield <phil.attfield@seqlabs.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Gpio-keys nodes are not using the "reg" property in their sub nodes.
So, there is no need to define #address-cells and #size-cells properties
in gpio-keys nodes: we remove them in these new boards.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

File name had at91 prefix, which is not the case anymore for SAMA5D3.
AT91SAM9x5 was mentioned instead of SAMA5D3 SoC.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Enable usb device port on at91sam9n12ek board.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add usb device node for at91sam9n12.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Enable ISI and ov2640 for at91sam9g25ek board.
Meantime, we need to disable the mmc1 and spi0 as they have pin conflict
with ISI.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add the camera sensor ov2640 dt support. And connect sensor to isi node
as well.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Add a new file: at91sam9x5_isi.dtsi, which includes ISI node and
pinctrls.
Signed-off-by: Josh Wu <josh.wu@atmel.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

First fixes batch for AT91 on 4.0:
- PM slowclock fixes for DDR and timeouts
- fix some DT entries
- little defconfig updates
- the removal of a harmful watchdog option + its detailed documentation

Since turning on idle-halt in commit fe46aa67 (ARM: at91/dt: add
sam9 watchdog default options to SoCs), SoCs compatible with at91sam9260-wdt
no longer reboot if the watchdog times out while the CPU is in idle state.
Removing the 'idle-halt' flag that was set by default fixes this.
Signed-off-by: Michel Marti <mma@objectxp.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Acked-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
[nicolas.ferre@atmel.com: rework the commit message]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

atmel,idle-halt property should be used with care, it actually makes the
watchdog not counting when the CPU is in idle state, therefore the
watchdog reset time depends on mean CPU usage and will not reset at all
of the CPU stop working while it is in idle state, which is probably not
what you want.
Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

There is now only one defconfig for the at91rm9200 and at91sam9. Add ethernet
support for the at91rm9200.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Recent distributions and userspace tools after 2009/2010 depend on
the existence of /sys/class/block/, and will not work with this option enabled.
Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Corrected pins used by usart3.
Signed-off-by: Jonas Andersson <jonas@microbit.se>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Commit ff04660e48b20 ("ARM: at91/dt: add SRAM nodes") used the same base
address for sram0 and sram1 leading to the following warning:
WARNING: CPU: 0 PID: 1 at fs/sysfs/dir.c:31 sysfs_warn_dup+0x50/0x70()
sysfs: cannot create duplicate filename '/devices/platform/300000.sram'
Fix the base address for sram1.
Signed-off-by: Alexander Stein <alexanders83@web.de>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

On some platforms, there are multiple SRAM nodes defined in the device tree but
some of them are disabled, leading to allocation failure. Try to find the first
enabled SRAM node and allocate from it.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Tested-by: Wenyou Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

at91rm9200 standby and suspend to ram has been broken since
00482a40. It is wrongly using AT91_BASE_SYS which is a physical address
and actually doesn't correspond to any register on at91rm9200.

Use the correct at91_ramc_base[0] instead.

Fixes: 00482a40 (ARM: at91: implement the standby function for pm/cpuidle)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

The DDRSDR controller fails miserably to put LPDDR1 memories in
self-refresh. Force the controller to think it has DDR2 memories
during the self-refresh period, as the DDR2 self-refresh spec is
equivalent to LPDDR1, and is correctly implemented in the
controller.

Assume that the second controller has the same fault, but that is
untested.
Signed-off-by: Peter Rosin <peda@axentia.se>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>

Removed timeout on XTAL, PLL lock and Master Clock Ready, hang if
something went wrong instead of continuing in unknown condition. There
is not much we can do if a PLL lock never ends, we are running in SRAM
and we will not be able to connect back the sdram or ddram in order to
be able to fire up a message or just panic.

As a bonus, not decounting the timeout register in slow clock mode
reduce cumulated suspend time and resume time from ~17ms to ~15ms.
Signed-off-by: Sylvain Rochet <sylvain.rochet@finsecur.com>
Acked-by: Wenyou.Yang <wenyou.yang@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>